Chuango RT-101
Contents
1. Plug in Wireless Signal Repeater RT 101 User Manual Introduction The repeater is a wireless signal relay transmission device With MCU technology it can decode the signal in the air and strengthen the transmitting power to extend the transmission distance range Failure to receive signal to panel from wireless accessories is frequently happened due to the long distance range when the remote controlling or wireless alarm systems are applied to large scale of commercial tall buildings villa and industrial areas This wireless signal repeater could solve this problem and further distance range signal transmitting could be achieved Product Overview Antenna Power ON OFF Learning Button Interface for External Antenna 88888b88988 M Note Please pull out the antenna for optimal performance LED Indication Green LED on working status Blue LED flashes once signal transmitting Green and blue LEDs flash alternatively in connect status Adding and Deleting Accessories When adding or deleting accessories you should make this repeater in learning or deleting accessories status Firstly turn the switch from OFF to ON If the repeater is in ON status switch it to OFF first and then switch it to ON the repeater will enter learning or deleting accessories status for one minute while the green and blue light flash in turn Extend Transmission Distance Between Accessories And Cont2. rol Panel When the repeater is in connect status press its connect button then trigger a wireless sensors For example press any button on the remote control or separate the transmitter and magnet of the door window contact The blue LED lights up for 2 seconds and goes off then the green and blue LEDs flash alternatively If the repeater is still in connect status you can repeat the above operation to add more accessories Note If the repeater exits the connect status switch off and then switch on the repeater to re enter the connect status Then repeat the above operation to add more accessories Workflow Signal transmitting Signal transmitting v v Repeater receives Control panel receives signals Trigger contact detector or activate remote control signals A a e Max distance Max distance in open area 90m in open area lt 300m Extend Transmission Distance Between Control Panel and Siren Press the connect button under connect status Press the SOS button on the control panel the repeater succeeds in connecting with the control panel after the blue LED lights up for 2 seconds and goes off Then the green and blue LEDs flash alternatively Workflow Signal transmitting v Signal transmitting Control panel arm Repeater receives Siren receives disarm alarm signals signals i o 6 O Max distance Max distance in open area 90m in open area lt 300m Dele
3. ting Accessories Press and hold the connect button for 5 seconds under connect status the repeater disconnects from all accessories after the blue LED lights up for 2 seconds and goes off Then the green LED keeps on Eo Power Supply AC 110V 240V 50 60Hz Wireless Transmitting Range lt 300m Wireless Receiving Range lt 90m Radio Frequency 315MHz or 433MHz 75KHz Static Current lt 15 5mA Transmitting Current lt 1 1A aximum Accessories Supportable 40 PCS Back up Battery 3 7V 600mAh Lithium Battery 2 22Wh Housing Material ABS plastic Operation Condition Temperature 10 C 55 C Relative Humidity lt 80 non condensing Dimension L x W x H 140 x 86 x 87mm Ver RT 101 EN 1311 V3 0 2013 2015 Chuango All rights reserved TE CHUANGO RT 101 80 210X285mm 70X95mm I Ver RT 101 EN 1311 V3 0
Download Pdf Manuals
Related Search