Jura IMPRESSA XJ5
Contents
1. WD _ gt Place a cup under the coffee spout gt Press the 1 coffee button Preparation starts The coffee strength is briefly displayed The preset amount of water for coffee flows into the cup Preparation stops automatically Kisi appears on the display Preparing two speciality To prepare two cups of coffee Place two cups under the coffee coffees at the touch of a spout Press the 2 coffees button t to start the coffee preparation button 15 2 Preparation Ground coffee Permanently setting the amount of water for the cup size 16 You can choose to use a second coffee variety for example decaf feinated coffee with the filter funnel for ground coffee i Never add more than two level measuring spoons of ground coffee Use ground coffee which is not ground too finely Very fine coffee can block up the system so that the coffee only comes out in drips i If you did not fill the machine with a sufficient amount of ground coffee NOT EREUGH PRE ire is displayed and the IMPRESSA A stops the en The desired speciality coffee must be prepared within approx imately one minute after filling with the ground coffee Oth erwise the IMPRESSA stops the operation and is once more ready for use mo All speciality coffees with ground coffee are prepared following this model Example Proceed as follows to prepare one espresso using ground coffee gt Place an espresso cup2. IMPRESSA X 5 Professional Instructions for Use il Original instructions for use Before using the machine read the instructions for use Checked documentation comprehensible amp complete amp safe DocCert Voluntary test according to Standare The Instructions for use has been awarded the seal of approval by the independent German Technical Inspection Agency TUV SUD due to its easy to understand style its thoroughness and coverage of safety aspects JURA Type 684 Table of contents Your IMPRESSA XJ5 Professional Control elements 4 Important information 6 FO E EE E A E O ected E OA EE E E T 6 Fe OES e E SE A A EAR E A A sete eine es AEA EA A EN 6 1 Preparing and using for the first time 10 MEE REE E LGU E E E O EE A A 10 Settings by the JURA Service technician sssessesssssssesseserssrossesseesersseosseoserssrsssrsneosersseossroserssrossroseeseres 10 Setting up the machine sesssesssesserssrssresserserssrosresseessrsssesseeserssrosnrsseeserssressseserssrossrsseesersresntoserssrosereseeseres 10 Filing tne bean Contae sassen E EEEE 10 BS NUS E S EA A A A T EE donde E A TE 11 Determining the water hardness essessssesseeserssrssrrsseeserssessseoseessrsssroseoseresesssroseessroserorroseessesssrsstossreserssre 14 Adjusting the ONNE secession eaei TEE a E aaa EE EE 14 2 Preparation 15 E KET E E O A EEEE E O EE ET 15 Preparing two speciality coffees at the touch of a button se ssssssssssssessse
3. Temperature Soses gt oo sesos Soses gt oo cesos In the programme item HiiT THE you can make individual set tings for all speciality coffees hot water and steam The following settings can be made Coffee strength Amount BET pho mg hi Volume Volume oo ee per cu p Volume Amount of steam ee ee a le ie Ree Ne Oe Example Proceed as follows to change the coffee strength for one espresso from TROAH to HSER and the amount of water trom aS Fe TOE Pe Precondition is displayed gt Press and hold the Rotary Switch until appears Turn the Switch until the programme item pi is displayed gt Press the Rotary Switch Next select the button of the product for which you would like to make settings No product is prepared at this point m o g gt Press the 1 espresso button So c ceses sooo cooo gt Press the Rotary Switch Turn ihe Rotary Switch until 2 i i is displayed gt Press the Rotary Switch appeals briefly on the display Turn nine er Switch until HG TH is displayed gt Press the Rotary Switch Setting the water hardness 4 Permanent settings in programming mode Turn the Rotary Switch until is displayed gt Press the Rotary Switch i appears briefly on the display Turn the Rotary Switch until 2 7 is displayed gt Press the Rotary Switch to exit the programme item Tu
4. Use of products that are not explic itly recommended by JURA could damage the IMPRESSA Do not use any coffee beans treated with addi tives or caramelised coffee beans Only fill the water tank with fresh cold water Switch the machine off at the power switch if you are going to be absent for a longer period of time Children may not clean or service the machine unless supervised by a responsible person Important information Donotallow children to play with the machine Keep children under the age of 8 away from the machine or supervise them constantly a Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely Chil dren must be able to recognise and under stand the potential dangers arising from incor rect use People including children who do not have the physical sensory or mental Capabilities to use the machine safely or are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it or must be instructed in how to use it cor rectly Safety when handling the CLARIS Pro Blue filter cartridge a Filter cartridges should be kept out of the reach of children Store filter cartridges in a dry place in the sealed packaging Protect cartridges from heat and direct sun light Do not use damaged filter cartridges Do not open filter cartridges 1 Preparing and using
5. EER the machine rinses The operation stops auto matically E22 appears on the display Your IMPRESSA is ready for use 13 1 Preparing and using for the first time Determining the water hardness ra E a raf MR i tauch Dip briefly 1 sec Plongez bri vement _ leicht ab shake off excess 1 sec gouttez y Mund nach water and compare l exc s d eau et com lesen after 1 min parez apr s 1 min reen ve lt 3 dH lt 3 75 e lt 5 4 f rouge gt 4 dH 5 e gt 7 2 f yrouge ME gt 8 4 dH gt 10 5 e gt 15 1 F rouge HM E gt 14 dH gt 17 5 e gt 25 2 F Adjusting the grind 14 You can find out what the water hardness is by using the Aquadur test strip supplied as standard gt Hold the test strip briefly for 1 second under flowing water Shake off the water gt Wait for about one minute gt You will then be able to read the degree of water hardness from the discolouration of the Aquadur test strip and the description on the packaging You can now adjust the water hardness You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee If you adjust the consistency of grind when the grinder is not oper ating the grinder adjustment switch could be damaged gt Only adjust the consistency of grind when the grinder is run ning The consistency of grind is correct if the coffee flow
6. Hot water 17 Problems Troubleshooting 39 Product settings 22 Programming mode 20 Automatic switch off 24 Disable 30 Energy saving mode 24 Language 29 Product settings 22 Querying information 27 10 Index Reset counter 28 Restore factory settings 26 Rinses 25 Setting the water hardness 23 Unit for amount of water 29 Proper use 6 Querying information 27 Rinses 25 Rinsing Machine 31 Rotary Switch 5 Safety 6 Safety information 6 Settings Permanent settings in programming mode 20 Setting up Setting up the machine 10 Switching off Machine 19 Switching on Machine 18 Switch off Automatic switch off 24 Symbol description 3 Technical data 41 Tel 44 Transport 40 Troubleshooting 39 Unit for amount of water 29 Use First time 11 W Water hardness Determining the water hardness 14 Setting the water hardness 23 Water tank 4 Descaling 37 Filling 18 Website 10 43 70534 X 5 en 201402 11 JURA contact details Legal information 11 JURA contact details Legal information Your JURA service partner Directives Technical changes Feedback Copyright 44 JURA Elektroapparate AG Kaffeeweltstrasse 10 CH 4626 Niederbuchsiten Tel 41 0 62 38 98 233 www jura com The machine complies with the following directives 2006 42 EC Machinery Directive 2004 108 EC Electromagnetic Compatibility 2009 125 EC Ecodesign Directive 2011 65 EU RoHS Directive We reserve the right to mak
7. coffee spout 5 Coffee grounds container 6 Drip tray 7 Cup grille Filler funnel for ground coffee Storage compartment cover Grinder adjustment switch Measuring spoon for ground coffee Hot water nozzle Control elements 4 5 Top of the machine Front 1 On Off button 4 Display 2 Rotary Switch 5 Preparation buttons 3 4 Maintenance button espresso button gt 2 espressi button lL Hot Water button 4s Steam button 1 coffee button Lp 2 coffees button 3 Back of the machine Basss 1 Power switch 3 Port under cover 2 Mains cable Important information Important information Proper use For your safety This machine is intended for use by specialist or trained staff in businesses light industry and agri cultural facilities or for commercial use by non pro fessionals It should only be used for coffee prepa ration and to heat milk and water Use for any other purpose will be deemed improper JURA Elektroap parate AG cannot accept any responsibility for the consequences of improper use Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain A warranty ser vice is not applicable for damage or defects caused by non compliance with the instructions for use Keep these instructions for use close to the machine and pass them
8. on to the next user The IMPRESSA may only be operated by instructed persons Non professionals must be supervised during use Please carefully read and observe the important safety information set out below To avoid danger of potentially fatal electric shock Never use a machine which is damaged or has a defective mains cable a Inthe event of signs of damage for example if there is a smell of burning unplug the machine immediately from the mains supply and con tact JURA service a fthe mains cable of this machine is damaged it must be repaired either directly by JURA or by an authorised JURA service centre Important information Make sure that the IMPRESSA and the mains cable are not located close to hot surfaces Becareful to ensure that the mains cable is not trapped and does not rub against sharp edges Never open and repair the machine yourself Do not modify the machine in any way that is not described in these instructions for use The machine contains live parts If opened there is a danger of potentially fatal injury Repairs may only be carried out by authorised JURA service centres using original spare parts and accessories To completely and safely disconnect the machine from the power supply first switch off the IMPRESSA using the On Off button and then at the power switch Only then should you remove the mains plug from the power socket There is a risk of scalds or burns on the spouts or
9. under the coffee spout gt oe the cover eo as aller funnel for ground coffee gt pisces one eel meeting spoon of ground coffee into the filler funnel gt Close the cover of the filler funnel Press the 1 espresso button Preparation starts The preset amount of water for espresso flows into the cup Preparation stops automatically REREH appears on the display It is easy to make permanent settings for the amount of water for all speciality coffees and hot water according to the cup size Adjust the amount once as shown in the following example Every time you prepare a drink in the future this amount of water will be dispensed The permanent settings for adapting the amount of water to the cup size for all speciality coffees and hot water follow this model 2 Preparation Example Proceed as follows to permanently set the amount of water for one coffee Precondition is displayed gt Place a cup under the coffee spout gt Press and hold the 1 coffee button D Hold the 1 coffee button down until Hpi dnr EM Ee appears WW Release the 1 coffee button Preparation starts and the coffee flows into the cup gt Press any button as soon as there is sufficient coffee in the cup Preparation stops appears briefly on the display The set amount of water for one coffee is permanently stored SESE Y appears on the display i You can alter this setting at any time by repeating the above proced
10. Press the Rotary Switch to exit programming mode 30 5 Maintenance Rinsing the machine Inserting and activating the filter 5 Maintenance Your IMPRESSA has the following integrated maintenance pro grammes m Rinsing the machine s m Changing the filter E i 7 only if filter is activated m Cleaning the machine zen m Descaling the machine ox DE eii E only if filter is not acti vated 1 Clean the machine descale the machine or change the filter when you are prompted to do so You can initiate the rinse operation manually at any time Precondition is displayed gt Place a receptacle under the coffee an gt i ang hold the Rotary Switch until 5 i5 appears gt Press the ey Switch gt m he Rotary Switch again y g aa Water flows out of the coffee spout The rinse eae automatically i appears on the dis play Your IMPRESSA no longer has to be descaled if you are using the CLARIS Pro Blue filter cartridge If the water hardness is 10 dH or more we recommend using the filter cartridge If you do not know the hardness of your water you can find this out first see Chapter 1 Preparing and using for the first time Determining the water hard ness If you did not activate the filter cartridge the first time you used the machine you can do this now as follows i Perform the inserting the filter operation without any inter ruptions This w
11. an make the following settings The switch on rinse must be started manually eat Seer Ti ame Se a a E E The switch on rinse is started automatically Example Proceed as follows to specify that the switch on rinse should be started manually Precondition 577 is displayed gt Press and hold the Rotary Switch until i appears gt Turn the Rotary Switch until the programme item RINSING is displayed gt Press the Rotary Switch gt Turn the Rotary Switch until Hisi ii is displayed gt Press the Rotary Switch 8 appears briefly on the display gt Turn the Rotary Switch until 2 is displayed gt Press the Rotary Switch to exit programming mode 25 4 Permanent settings in programming mode Restore factory settings In the programme item 2 you can reset various settings to their factory settings BOOP ROLE The settings e g amount of water and temperature for any product can be reset individually to the factory settings E FE Pee The settings e g amount of water and temperature for all products are reset to the factory settings MOREE Po PALL All user settings apart from the filter and water hardness are reset to factory settings Your IMPRESSA then switches off Example Proceed as follows to reset the values for 1 espresso to the factory settings Precondition 17 is displayed gt Press and hold the Rotary Switch until 5 ap
12. aste APRA of the filter bis automatically a CNS a the system fills up with water Water ows out of the a water nozzle The operation stops auto matically iBEE the machine rinses The operation stops auto matically EY appears on the display Your IMPRESSA is ready for use First time use without filter cartridge activation 1 Preparing and using for the first time CAUTION Milk sparkling mineral water or other liquids can damage the water tank or the machine gt ule Only fill the water tank with fresh cold water Tum the Rotary Switch until FILTER RO is dis played gt Press the Rotary Switch to confirm the setting Sapa briefly on the display If you do not know the hardness of your water you must find this out first see Chapter 1 Preparing and using for the first time Determining the water hardness gt Turn the Rotary Switch to set the desired water hardness gt Press the Rotary Switch to confirm the setting i appears briefly on the display gt Remove the water tank and rinse it with cold water gt Fill the water tank with fresh cold water and reinsert the tank eae the Maintenance button lights up gt Place one receptacle under the coffee spout and another under the hot water nozzle gt Press the Maintenance button ee the system fills up with water Water ne out wo the o water nozzle The operation stops auto matically
13. ce After 120 litres of water have flowed through the filter will cease to work Your IMPRESSA will automatically prompt you to change the filter After two months the filter will cease to work Set the date on the date plate on the filter holder in the water tank If the CLARIS Pro Blue filter cartridge is not activated in pro gramming mode you will not be prompted to change the fil ter CLARIS filter cartridges are available from specialised dealers Precondition 5577 i TER is displayed and the Mainte nance button lights up b h p e m o p e gt Press the Maintenance button TER CHAISE gt Remove and empty the water tank gt Open the filter holder and remove the old CLARIS Pro Blue filter cartridge gt Insert the new filter cartridge into the water tank exerting slight pressure gt Close the filter holder It will click into place audibly After two months the filter will cease to work Set the date on the date plate on the filter holder in the water tank gt Fill the water tank with fresh cold water and reinsert the tank gt Place a receptacle under the hot water nozzle gt Press the Maintenance button PILTER Bs brits fics water flows out of the hot water nozzle You can interrupt rinsing of the filter at any time by pressing the Maintenance button Press the Maintenance button again to continue rinsing of the filter The water may be slightly discoloured This
14. coffee spout gt Press the On Off button HERETER the machine rinses The operation stops auto matically Your IMPRESSA is switched off i When the IMPRESSA is switched off with the On Off button the machine consumes less than 0 1 W of standby energy The machine can be completely disconnected from the power supply using the power switch 4 Permanent settings in programming mode 4 Permanent settings in programming mode Programme item 20 You can make permanent settings in programming mode You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch You can make the following settings with the Rotary Switch Sub item asee Seese 9 filter is activated essee se e titig a a a only if filter is not activated Explanation gt Select the desired maintenance programme If no action is taken in this programme item programming mode is exited automatically after approximately 5 seconds gt Select your settings for speciality coffees and hot water gt Indicate whether you are operating your IMPRESSA with or without a CLARIS Pro Blue filter cartridge gt Adjust the water hardness gt Select an energy saving mode gt Set the time after which the IMPRESSA should switch off automatically gt Set whether the switch on rinse should be started manually or automatically gt Reset the permanently set value
15. csssssscssssecscssssssssssecsesssecsesssessesssececssssesesees Ceaning the Machi siiin ia tut testes Descaling the machine se sesessesssssssessersersssosreoserssrosresserserssresseoserssrossrsss Cleaning the bean container se sessssessersersseossesserssrossesserserssrossesserssee Descaling the water tank ssesssssssessersersssosseoserssrosrssserserssresseeserssrossrsss Display messages Troubleshooting Transport and environmentally friendly disposal Transport Emptying the SYStem csecssssescessessssseesseseeseesesseeseeneesen BEES E E E ie nena Veh E E A T Technical data Index JURA contact details Legal information Symbol description Warnings ZA WARNING CAUTION Table of contents Always take note of any information marked with the words CAUTION or WARNING and a warning sign The signal word WARNING draws your attention to potential serious injury and the signal word CAUTION to potential minor injury CAUTION CAUTION draws your attention to potential damage to the machine Symbols used gt Prompt to take action This symbol means that you are being prompted to perform some action i Information and tips to make it even easier to use your IMPRESSA i omapempmaum Display Control elements Control elements 2 3 4 5 6 7 1 Bean container with aroma preservation cover 2 Water tank cover 3 Water tank 4 Height and width adjustable
16. e technical changes The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine Some details of your IMPRESSA may vary Your opinion is important to us Use the contact link at www jura com The instructions for use contain information which is protected by copyright It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG
17. er fully out gt Clean and dry the metal contacts on the back of the drip tray gt Descale the water tank see Chapter 5 Maintenance Descaling the water tank gt Contact customer support in your country see Chapter 11 JURA contact details Legal information gt Warm the machine at room tempera ture gt Switch the IMPRESSA off at the power switch Contact customer support in your country see Chapter 11 JURA contact details Legal information i If you were unable to solve the problem contact customer support in your country see Chapter 11 JURA contact details Legal information 39 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport Emptying the system Disposal 40 In order to protect the IMPRESSA from frost during transport the system must be emptied Precondition is displayed gt Place a receptacle under the hot water nozzle Press the Steam button Filer hot steam is discharged from the hot water noz zle gt Remove and empty the water tank Turn the Rotary Switch until lt is displayed Steam will continue to be discharged from the hot water nozzle until the system is empty gt Press the On Off button The IMPRESSA is switched off Please dispose of old machines in an environmentally neutral way E Old machines contain valuable recyclable materials which
18. essesssesssesssrssssenssensseessessseee 15 UNCON eeeeenenn mm eR E CME oN oat vn eee freee ve 16 Permanently setting the amount of water for the CUD SIZC esessssesessessseescsesessesesessesesesscsesssseecesesees 16 EIER E 1 E E EEEE A EE EE A TEE EE E ET 17 3 Daily operation 18 Filing the water CaM ett tee tertcon etna wet ih ides in inasai eara i o diaioieras reak EANET aiai i 18 E OU aee EE E EA E E E N A E E E EA E 18 Dany es WN eisie aeo EEEE re E E E E A 19 D A O e E E A E E 19 4 Permanent settings in programming mode 20 Enabling ana disabling programming FIO Esisi snaiper S ani aeea annari 21 Podu SA e ccc annien sacar canete ndsancbecavexatncees E A 22 Setting the water hardness essesssssssesserserossossesserorrosressersersseossesserssrossesseesnrosrossesseronrosnesseessrssressessernere 23 BUT SA POS A E 24 EE MG SVU MRO acct A ae cece EE A E E E O E 24 BBR EE A E EEA E E AT A EA E 25 Restore TACCORY Settings xexctecestincscectenpnseesst vorstadbloatd enian heii vcaledbbaces dbdachilsdececompassOrbtvediaasbeen 26 Querying MOMania ER e earra EN EAE E E a EEE E EAE 2 RE ECCU E ar a E E N EEE E E E A EE AEO E 28 UNE Co amount Or Wa T page ee ene neee ere ene neonres A ae eee 29 EEEE a e EE EETA ANE E E E AE EE EE A EE eS EI o EE A E A E A E E E tere 30 10 11 Maintenance Rinsing E MacEide Inserting and activating the filter ccscssssssssssecssssssessseseessseseeeees Changing the filter ccssssse
19. for the first time 1 Preparing and using for the first time JURA on the Internet Settings by the JURA service technician Setting up the machine CAUTION Filling the bean container 10 CAUTION Visit us on the Internet On the JURA website www jura com you will find interesting and up to date information on your IMPRESSA and on every aspect of coffee The following settings can only be made by the JURA service techni cian E Setting the filter capacity You can also obtain the following optional accessories for your IMPRESSA from your JURA service partner m Set for automatic coffee grounds disposal function and drip drain m Permanent water connection kit m Payment system and other accessories If the machine is not lifted properly it may be damaged gt Do not lift the machine by the bean container gt Only lift the machine by gripping it underneath in the recesses on the left and right sides of the machine When setting up your IMPRESSA please note the following m Place the IMPRESSA on a horizontal surface that is not sensi tive to water m Choose a spot for your IMPRESSA which protects the machine against overheating Ensure that the ventilation slots are not covered The bean container has an aroma preservation cover This will ensure that your coffee beans retain their aroma for longer Coffee beans which have been treated with additives e g sugar ground coffee or freeze dried coffee wi
20. ghts up a gt Press the Maintenance button gt Empty the drip tray and coffee grounds container and put them back into the machine gt Remove and empty the water tank gt Completely dissolve 3 JURA descaling tablets in a receptacle holding 600 ml of water This may take several minutes gt Pour the solution into the empty water tank and insert it into the machine SHEET ERE TERE and the Maintenance button lights up 35 5 Maintenance ooo ule 36 gt Place a receptacle under the hot water nozzle gt Press the Maintenance button De water flows straight into the drip tray and out ti the a water nozzle The operation is interrupted EMF TY TRAY gt Empty the receptacle gt Empty the drip tray and coffee grounds container and put them back into the machine gt Remove the water tank and rinse it thoroughly gt Fill the water tank with fresh cold water and reinsert the tank Ri and the Maintenance button s lights up gt Place one eie under the hot water nozzle and another under the coffee spout gt Press the Maintenance button CoS Water flows out of the hot water nozzle sind ihe ate ena The operation stops automatically ie Py PRAY gt Empty the drip tray and coffee grounds container and put them back into the machine Descaling is now complete Your IMPRESSA is once more ready for use If the descaling operation stops unexpectedly
21. i Pen a on the display to confirm the setting Now decide whether you want to operate your IMPRESSA with or without a CLARIS Pro Blue filter cartridge mo Milk sparkling mineral water or other liquids can damage the water tank or the machine gt Only fill the water tank with fresh cold water 11 1 Preparing and using for the first time bbb p e 12 me p e gt Press the Rotary Switch to confirm the setting paps au on the display Lior FP the Maintenance button lights up gt Press the ARACE punon gt ee neg water nen and rinse it with cold water gt Open the filter holder and insert the filter cartridge into the water tank exerting slight pressure gt Close the filter holder It will click into place audibly After two months the filter will cease to work Set the date on the date plate on the filter holder in the water tank gt Fill the water tank with fresh cold water and reinsert the tank PrE the Maintenance button lights up gt Place one ean under the coffee spout and another under the hot water nozzle gt Press the Maintenance button Pik water flows out of the hot water nozzle You can interrupt rinsing of the filter at any time by pressing the Maintenance button Press the Maintenance button again to continue rinsing of the filter The water may be slightly discoloured This is not harmful to health and does not affect the t
22. ill ensure that your IMPRESSA always produces its best 31 5 Maintenance Precondition 577 is displayed Q mo m e ule 32 gt Press and hold the Rotary Switch until 2 appears gt Turn the ae Switch until the programme item I s displayed gt Press the ue Switch gt Turn the Rotary Switch until is displayed gt Press the Rotary Switch a ele briefly on the display the Maintenance button lights up gt E ie empty the water tank gt Open the filter holder and insert the filter cartridge into the water tank exerting slight pressure gt Close the filter holder It will click into place audibly After two months the filter will cease to work Set the date on the date plate on the filter holder in the water tank gt Fill the water tank with fresh cold water and reinsert the tank gt Place a receptacle under the hot water nozzle gt Press the Maintenance button WELTER RERS water flows out of the hot water nozzle You can interrupt rinsing of the filter at any time by ee the Maintenance button Press the Maintenance button again to continue rinsing of the filter The water may be slightly discoloured This is not harmful to health and does not affect the taste Rinsing of the filter stops automatically The machine heats up Your IMPRESSA is once more ready for use Changing the filter p e i 5 Maintenan
23. ion 577 is displayed gt Press and hold the Rotary Switch until appears Turn the Pie Switch until the programme item LP is displayed gt Press the e Rotary Switch Turn nie N Swithin eer ee i is displayed gt Press the Rotary Switch n briefly on the display eso Seee sooo sosoo cesos sooo Turn aiie eN Switch until 7 is displayed gt Press the eho Switch to exit programming mode 29 4 Permanent settings in programming mode Disable In the programme item i you can make the following settings x Pde Each product can be disabled individually It cannot then be prepared i222i amp 2 is briefly displayed if the button for a disabled product is pressed ME ae it sans we eS One off settings cannot be made before and during prepa ration The product is prepared according to the settings in programming mode The maintenance programmes are disabled and cannot be started Example Proceed as follows to disable one off settings before and during preparation Precondition 8517 is displayed gt Press and hold the Rotary Switch until 5 appears Turn the Rotary Switch until the programme item 280 is displayed gt Press the Rotary Switch Turn the Rotary Switch until S2L 2 7 is displayed gt Press the Rotary Switch ii EE appears briefly on the display Turn the Rotary Switch until 2 is displayed gt
24. is not harmful to health and does not affect the taste Rinsing of the filter stops automatically The machine heats up Your IMPRESSA is once more ready for use 33 5 Maintenance Cleaning the machine After 200 preparations or 80 switch on rinses the IMPRESSA will prompt you to clean it CAUTION Ifthe wrong cleaning agent is used the machine could be damaged and or traces could be left behind in the water gt Use only original JURA maintenance products The cleaning programme lasts approximately 20 minutes mmo mule Do not interrupt the cleaning programme The quality of cleaning will be impaired if you do so JURA cleaning tablets are available from specialised dealers p e Precondition 5557y i e is displayed and the Maintenance button lights up b a gt Press the Maintenance button gt Empty the drip tray and coffee grounds container and put them back into the machine the Maintenance button lights up gt hae a Aor under the coffee spout s gt Press the Maintenance button E Water flows out of the coffee spout The Ean is interrupted gt Open the cover of the filler funnel for spun e gt Insert a JURA cleaning tablet into the filler funnel gt Close the cover of the filler funnel Pr the Maintenance button s lights up do o pies the Maintenance button Water flows out of the coffee spout several times The operation is interrupted g
25. it ee Proceed as follows to change the energy saving mode from SAVE e to SAE Precondition SEY js is displayed gt Press and hold the Rotary Switch until 2 appears Turn the Rotary Switch until the programme item HRERS a is displayed gt Press the Rotary Switch Turn the Rotary Switch until 5 4 is displayed gt Press the Rotary Switch epee d on the display Turn nie ver Switch until 2 is displayed gt Press the Rotary Switch to exit scious mode Automatic switch off By instructing your IMPRESSA to automatically switch itself off you can cut down your energy consumption If this function is activated your IMPRESSA switches off automatically after the preset time fol lowing the last action on the machine You can set the automatic switch off time to 15 minutes or 0 5 15 hours Example Proceed as follows to change the automatic switch off Precondition HESE is ead 24 Rinses 4 Permanent settings in programming mode gt Press and hold the Rotary Switch until iE appears gt Turn the Rotary Switch until the programme item 5 mE TER is displayed gt Press the Rotary Switch gt Turn the Rotary Switch until ii is displayed gt Press the Rotary Switch 8 appears briefly on the display gt Turn the Rotary Switch until is displayed gt Press the Rotary Switch to exit programming mode In the programme item F in iit you c
26. l the programme item SLI TER is displayed gt Press the Rotary Switch The total number of prepared speciality coffees hot water and steam is displayed By pressing the individual buttons for the speciality coffees m o hot water and steam the respective number of prepared products is displayed Open the cover of the filler funnel for ground coffee to query this number p e gt Press the Rotary Switch DELETE YEE lt gt Press the Rotary Switch i appears briefly on the display Turn the Rotary Switch until 2 is displayed gt Press the Rotary Switch to exit programming mode 28 Unit for amount of water Language 4 Permanent settings in programming mode You can change the unit for the amount of water from m to oz Example Proceed as follows to change the unit for the amount of water from FL to 2 Precondition 2 is displayed gt Press and hold the Rotary Switch until appears Turn the Rotary Switch until the programme item x js displayed gt Press ag Rotary Switch Turn nie Rotary Switch until is displayed gt Press the Rotary Switch cae a on the display Turn fe ene Switch until is displayed gt Press the Rotary Switch to exit n mode In this programme item you can set the language used by your IMPRESSA Example Proceed as follows to change the language from Ered rT TOL EUTG Precondit
27. ll damage the grinder gt Only use untreated coffee beans to fill the bean container First time use A WARNING First time use with filter cartridge activation CAUTION 1 Preparing and using for the first time gt Remove the aroma preservation cover gt Remove any dirt or foreign objects from inside the bean container gt Fill the bean container with coffee beans and close the aroma preservation cover When using the machine for the first time you can choose whether you want to operate IMPRESSA with or without the CLARIS Pro Blue filter cartridge If the water hardness is 10 dH or more we recom mend using the filter cartridge If you do not know the hardness of your water you can find this out first see Chapter 1 Preparing and using for the first time Determining the water hardness If the machine is operated with a defective mains cable there is a danger of potentially fatal electric shock gt Never use a machine which is damaged or has a defective mains cable Precondition The bean container has been filled gt Insert the mains plug into a power socket gt Switch on the IMPRESSA using the power switch on the back of the machine gt Press the On Off button to switch the IMPRESSA on The Rotary Switch lights up HEFL PPT Lies F Seer appears on the display gt Turn the Rotary Switch until the ule A is dis played for example Io O Se gt Press the Rotary Switch to connie i es
28. m the respective number of prepared products is displayed Open the cover of the filler funnel for ground coffee to query m o this number gt Press the Rotary Switch to exit the programme item Turn the Rotary Switch until 21 2 is displayed Continue turning the Rotary Switch to switch to the per p e formed descaling and filter change operations gt Press the Rotary Switch The number of performed cleaning operations appears on the display By turning the Rotary Switch the maintenance status can also p e be displayed in addition to the number of performed mainte nance programmes The filled out fields show the mainte nance status Once all fields are filled out your IMPRESSA will request the respective maintenance programme 21 4 Permanent settings in programming mode gt Press the Rotary Switch to exit the programme item Turn the Rotary Switch until 2 7 is displayed gt Press the Rotary Switch to exit the programme item Turn the Rotary Switch until is displayed gt Press the Rotary Switch to exit programming mode Reset counter In the 208 7 programme item you can record your consump tion over a user defined period You can reset this counter to zero at any time Example Proceed as follows to reset the counter to zero Precondition 517 is displayed gt Press and hold the Rotary Switch until appears Turn the Rotary Switch unti
29. ne 34 Coffee 15 Coffee grounds container 4 Coffee spout Height and width adjustable coffee spout 4 Consistency of grind Adjusting the grinder 14 Grinder adjustment switch 4 Contact details 44 Counter Reset 28 42 Cover Storage compartment 4 Water tank 4 Cup grille 4 Customer support 44 D Descaling Machine 35 Water tank 37 Disable 30 Display 5 Display messages 38 Disposal 40 Drip tray 4 E Emptying the system 40 Energy saving mode 24 Errors Troubleshooting 39 Espresso 15 F Factory settings Restore factory settings 26 Filler funnel Filler funnel for ground coffee 4 Filling Bean container 10 Water tank 18 Filter Changing 33 Inserting and activating the filter 31 First time use 11 With filter cartridge activation 11 Without filter cartridge activation 13 G Grinder adjustment switch 4 Ground coffee 16 Measuring spoon for ground coffee 4 Grounding point 41 H Hotline 44 Hot water 1 Hot water nozzle 4 Instant coffee Ground coffee 16 Internet 10 JURA Contact details 44 Internet 10 L Language 29 M Machine Cleaning 34 Descaling 35 Rinsing 31 Setting up 10 Switching off 19 Switching on 18 Mains cable 5 Maintenance 31 Daily maintenance 19 Measuring spoon for ground coffee 4 Messages display 38 p Permanently setting the water for the cup size 16 Permanent settings in programming mode 20 Power switch 5 Preparation 15 Coffee 15 Espresso 15 Ground coffee 16
30. ner full You cannot prepare any and the drip tray see Chapter 3 Daily products operation Daily maintenance The drip tray is full You cannot gt Empty the drip tray and the coffee prepare any products grounds container gt Clean and dry the metal contacts on the back of the drip tray For The drip tray is not inserted gt Fit the drip tray correctly or is not inserted at all You cannot prepare any products Phase The IMPRESSA is prompting you to Press the Maintenance button to start RIMDE perform a rinse or continue a the rinse or to continue the maintenance maintenance programme that was programme already started READY The IMPRESSA is prompting you to Perform cleaning see Chapter 5 PE clean it Maintenance Cleaning the machine READY The IMPRESSA is prompting you to Perform descaling see Chapter 5 eL descale it Maintenance Descaling the machine READY The filter cartridge no longer gt Replace the CLARIS Pro Blue filter Patan works The IMPRESSA is prompting cartridge see Chapter 5 Maintenance a filter change Changing the filter The bean container is empty You Fill the bean container see Chapter 1 cannot prepare any products Preparing and using for the first time Filling the bean container eT Epai There is insufficient ground coffee The next time you prepare a beverage ao ae in the machine the IMPRESSA add more ground coffee see Chapter 2 PERS st
31. ops the operation Preparation Ground coffee 38 7 Troubleshooting Problem Coffee only comes out in drips when it is being prepared Water hardness cannot be adjusted displayed although the bean container is full EPP Ty TRY S always displayed TRIE is displayed although the water tank is full Grinder is making a very loud noise AE cc 1S displayed Other ZEEEE messages are displayed Cause Result Coffee or ground coffee has been ground too finely and is blocking the system The same filter cartridge may have been used several times or the water hardness set incorrectly in the programming mode The CLARIS Pro Blue filter cartridge is activated The sliding catch for the bean container has not been pulled out or has not been pulled out completely The metal contacts of the drip tray are dirty or wet The water tank float is trapped There are foreign objects in the grinder If the machine was exposed to the cold for a long period of time heating is disabled for safety reasons 7 Troubleshooting Action gt Put the grinder on a coarser setting or use coarser ground coffee see Chapter 1 Preparing and using for the first time Adjusting the grinder gt Perform descaling see Chapter 5 Maintenance Descaling the machine gt Deactivate the filter cartridge in programming mode gt Pull the sliding catch on the right hand side of the bean contain
32. pears Turn the Rotary Switch until the programme item RESE Y is displayed gt Press the Rotary Switch gt Press the Rotary Switch Next select the button of the product for which you would like to make settings No product is prepared at this point m o g gt Press the 1 espresso button i appears briefly on the display The values for 1 espresso are reset to the factory settings gt Press the Rotary Switch to exit the programme item Turn the Rotary Switch until 7 is displayed gt Press the Rotary Switch to exit the programme item Turn the Rotary Switch until 2 7 is displayed gt Press the Rotary Switch to exit programming mode 26 4 Permanent settings in programming mode Querying information In the programme item 2 you can view the following informa tion B Hiir Pet Number of prepared speciality coffees hot water and steam E OLER Gee aL FILTER numberof maintenance programmes performed and the current maintenance status M LR Pe Software version Precondition is displayed gt Press and hold the Rotary Switch until appears Turn the Rotary Switch until the programme item 2 is displayed gt Press the Rotary Switch gt Press the Rotary Switch The total number of prepared speciality coffees hot water and steam is displayed By pressing the individual buttons for the speciality coffees p e hot water and stea
33. rinse the water tank thoroughly 5 Maintenance Cleaning the bean Coffee beans may be covered with a slight oil film which remains on container the walls of the bean container These traces may negatively affect the coffee result For this reason clean the bean container from time to time Precondition 29 is displayed gt Switch the machine off with the On Off button gt Switch the machine off at the power switch gt Remove the aroma preservation cover gt Clean the bean container with a soft dry cloth gt Fill the bean container with coffee beans and close the aroma preservation cover Descaling the water tank Limescale deposits may form in the water tank To ensure correct function of the machine descale the water tank from time to time gt Remove the water tank gt If you use a CLARIS Pro Blue filter cartridge remove this gt Descale the tank with a mild conventional descaling agent in accordance with the manufacturer s instructions gt Rinse out the water tank thoroughly gt If you use a CLARIS Pro Blue filter cartridge insert this again gt Fill the water tank with fresh cold water and reinsert the tank 37 6 Display messages 6 Display messages Message Cause Result Action FELL WATER The water tank is empty You gt Fill the water tank see Chapter 3 Daily cannot prepare any products operation Filling the water tank The coffee grounds container is gt Empty the coffee grounds contai
34. rn the Rotary Switch until 2 is displayed gt Press the Rotary Switch to exit programming mode If you are using the CLARIS Pro Blue filter cartridge and have activated it it is not possible to set the water hardness p e The harder the water is the more frequently the IMPRESSA needs to be descaled It is therefore important to set the water hardness accu rately The water hardness can be adjusted on a continuous scale between 1 dH and 30 dH Example Proceed as follows to change the water hardness from as Oe ae Precondition 577 is displayed gt e ane hold the Rotary Switch until 2 2 appears Turn fie hg Switch until the programme item ca is displayed gt Press the e Rotary Switch Turn ie or Switch until 5 lt is displayed gt Press the Rotary Switch i appears briefly on the display Turn the Rotary Switch until 2 7 is displayed gt Press the Rotary Switch to exit programming mode 23 4 Permanent settings in programming mode Energy saving mode In the programme item E y you can permanently set an enero N mode Energy Sz sage Mode E S M 5 chor fet the last preparation the IMPRESSA D heating up After about 5 minutes the message HHE REY mh is dis played Before you can prepare a speciality coffee hot water or steam the machine must heat up All speciality coffees as well as hot water and steam can be prepared without having to wa
35. s of all products to the factory settings 4 Permanent settings in programming mode Programme Sub item Explanation view the number of maintenance programmes performed gt Keep track of all speciality coffees prepared The counter can be reset to zero gt Select the unit for the amount of water gt Select your language LIP PERS gt Disable the preparation of individual products item Enabling and disabling programming mode hmi T gt Select whether or not to allow one off settings before and during preparation gt Disable the maintenance programme gt Exit programming mode You can set your IMPRESSA such that programming mode is disa bled When programming mode is disabled it cannot be accessed Example Proceed as follows to disable programming mode Precondition is displayed gt Remove the water tank gt Simultaneously press for approx 2 seconds the Rotary Switch Maintenance button and Hot Water button 4 Lg js briefly displayed Programming mode is disabled gt Fit the water tank To enable programming mode again remove the water tank Then simultaneously press the Rotary Switch Maintenance button s and Hot Water button 4 for approx 2 seconds 18 is briefly dis played Programming mode is enabled again 21 4 Permanent settings in programming mode Product settings Product 1 espresso 1 coffee 2 espressi 2 coffees Hot water Steam 22
36. s regularly from the coffee spout In addition a fine thick crema forms Example Proceed as follows to change the consistency of grind during the preparation of an espresso g gt Open the storage compartment cover gt Place a cup under the coffee spout gt Press the 1 espresso button The grinder starts up 2 ESP RES amp is displayed gt Turn the grinder adjustment switch to the desired position while the grinder is running The espresso is prepared and the consistency of grind is adjusted gt Close the storage compartment cover 2 Preparation p e p e i i 2 Preparation While a speciality coffee and hot water is being prepared you can stop preparation at any time Just press any button Before and during the grinding operation you can select the cones A of e a Py ee the coy During ien you can Ha the ea amount t of water by turning the Rotary Switch You can follow the current status of preparation on the display In programming mode you can enable or disable one off settings before and during preparation see Chapter 4 Permanent settings in programming mode Disable You can make permanent settings for all products in programming mode see Chapter 4 Permanent settings in programming mode Product settings Espresso and coffee The preparation of 1 espresso 2 espressi 1 coffee and 2 coffees fol lows this same model Example Proceed as follows to prepare one coffee
37. should be recycled Please therefore dispose of old machines via suitable collection systems 9 Technical data Voltage Power Airborne noise emitted Ambient conditions Conformity mark Energy consumption Energy consumption Pump pressure Holding capacity of water tank Holding capacity of bean container Holding capacity of coffee grounds container Cable length Weight Dimensions W x H x D 9 Technical data 220 240 V 50 Hz 1450 W Le lt 70 dB A Humidity max 80 Ambient temperature 10 35 C CES approx 4 1 Wh approx 10 6 Wh Static max 15 bar 4 500 g max 40 portions approx 1 1 m approx 12 8 kg 33 8 x 49 7 x 43 2 cm Information for testers repeat test in accordance with DIN VDE 0701 0702 The central grounding point CGP is located on the back of the machine below the JURA logo turn JURA logo anti clockwise 41 10 Index 10 Index A Addresses 44 Aroma preservation cover Bean container with aroma preservation cover 4 Automatic switch off 24 B Bean container Bean container with aroma preservation cover 4 Cleaning 37 Filling 10 Bus bar Technical data 41 Button 1 coffee button 5 1 espresso button 5 2 coffees button 5 2 espressi button 5 Hot Water button 5 Maintenance button 5 On Off button 5 Steam button 5 C Central grounding point 41 CLARIS Pro Blue filter cartridge Changing 33 Inserting and activating the filter 31 Cleaning Bean container 37 Machi
38. t Empty the drip tray and olies around container and put them back into the machine Cleaning is now complete Your IMPRESSA is once more ready for use 34 Descaling the machine A CAUTION CAUTION CAUTION CAUTION 5 Maintenance The IMPRESSA builds up deposits of limescale over time and auto matically prompts you to descale it when necessary The degree of calcification depends on the hardness of your water If the descaling agent comes into contact with the skin or eyes this can cause irritation gt Avoid contact with the skin or eyes gt Rinse off the descaling agent with clean water Should you get any descaling agent in your eye see a doctor If the wrong descaling agent is used the machine could be dam aged and or traces could be left behind in the water gt Use only original JURA maintenance products If the descaling operation is interrupted there may be damage to the machine gt Allow the descaling programme to run to the end If the descaling agent comes into contact with sensitive surfaces e g marble damage cannot be ruled out gt Clean up any splashes immediately The descaling programme lasts approximately 50 minutes JURA descaling tablets are available from specialised dealers If you use a CLARIS Pro Blue filter cartridge and this is acti vated you will not be prompted to descale ule pmo ime Precondition 5E S557 2 222 is displayed and the Mainte nance button li
39. the hot water nozzle a Place the machine out of the reach of children Do not touch any hot parts Use the handles provided Be careful to ensure that the hot water nozzle is correctly installed and clean If incorrectly fitted or if it becomes blocked the hot water nozzle might come off A defective machine is not safe and could cause injury or fire To avoid damage and any associated risk of injury or fire Never allow the mains cable to loosely hang down The mains cable could pose a tripping hazard or become damaged Important information Protect the IMPRESSA from environmental influences such as rain frost and direct sun light Do not immerse the IMPRESSA mains cable or connections in water Do not put the IMPRESSA or any individual parts in the dishwasher Switch your IMPRESSA off at the power switch before any cleaning operation Always wipe the IMPRESSA with a damp cloth rather than a wet one and protect it from prolonged expo sure to water splash The IMPRESSA is not suitable for installation on a surface where a jet of water can be used The machine must not be cleaned with a jet of water Only connect the machine to the mains volt age in accordance with the information on the rating plate The rating plate is located on the underside of your IMPRESSA Further technical data is provided in these instructions for use see Chapter 9 Technical data Please only use original JURA maintenance products
40. the water tank with fresh cold water and reinsert the tank gt Close the water tank cover When the IMPRESSA is switched on a rinse operation is automati cally initiated In programming mode you can change this setting so that the machine prompts you to perform the switch on rinse by pressing the Maintenance button see Chapter 4 Permanent set tings in programming mode Rinses Precondition Your IMPRESSA is switched on at the power switch gt Place a receptacle under the coffee spout gt Press the On Off button to switch the IMPRESSA on eile PY Ehin appears on the display the machine heats up HERE Tes the machine rinses The operation stops auto matically ii appears on the display 3 Daily operation Daily maintenance To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality the machine requires daily maintenance gt Pull out the drip tray gt Empty the coffee grounds container and the drip tray Rinse them both with warm water gt Dry the metal contacts on the back of the drip tray gt Refit the coffee grounds container and the drip tray gt Rinse the water tank with clean water gt Wipe the surface of the machine with a clean soft damp cloth e g microfibre cloth When the IMPRESSA is switched off the system is automatically rinsed if a speciality coffee has been prepared gt Place a receptacle under the
41. ure i You can also permanently set the amount for all speciality coffees hot water and steam in programming mode see Chapter 4 Permanent settings in programming mode Product settings Hot water The following temperatures can be selected for preparing hot water oe Secos soso S e es Steee 8 ee socos o Sessss gt hoe TE a 2 eri et rS Fhag T aa ioa A CAUTION There is a danger of scalding from hot water splashes gt Avoid direct contact with the skin gt Place a cup under the hot water nozzle ll gt Press the Hot Water button ie PE The preset temperature is then briefly displayed By touching the Hot Water button several times 4 within approximately 2 seconds you can set the temperature to m o your individual preference This setting is not saved Hot water flows into the cup Preparation stops automati cally KSE appears on the display 17 3 Daily operation 3 Daily operation Filling the water tank CAUTION Switching on 18 Daily maintenance of the machine and hygiene when handling milk coffee and water are key to a perfect coffee result in the cup every time You should therefore change the water daily Milk sparkling mineral water or other liquids can damage the water tank or the machine gt Only fill the water tank with fresh cold water gt Open the water tank cover gt Remove the water tank and rinse it with cold water gt Fill
Download Pdf Manuals
Related Search