Kramer Electronics RK-622 rack accessory
Contents
1. 6 Technical Specifications 6 Technical Specifications Table includes the technical specifications Table 1 Technical Specifications of the RK 622 DIMENSIONS 19 inch W 7 inch D 1U H WEIGHT 1 2 kg 2 65 Ibs approx ACCESSORIES 10 M3x5 conus black screws 6 M3x8 conus black screws OPTIONS 1 half 19 1U blank panel 1 Specifications are subject to change without notice 2 P N 2636 000979 6 KRAMER SIMPLE CREATIVE TECHNOLOGY LIMITED WARRANTY Kramer Electronics hereafter Kramer warrants this product free from defects in material and workmanship under the following terms HOW LONGIS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase WHOIS PROTECTED Only the first purchase customer may enforce this warranty WHAT IS COVERED AND WHAT IS NOT COVERED Except as below this warranty covers all defects in material or workmanship in this product The following are not covered by the warranty 1 Any product which is not distributed by Kramer or which is not purchased from an authorized Kramer dealer If you are uncertain as to whether a dealer is authorized please contact Kramer at one of the agents listed in the Web site www kramerelectronics com 2 Any product on which the serial number has been defaced modified or removed or on which the WARRANTY VOID IF TAMPERED sticker has been torn reattached removed or othe2. Rules and Regulations Part 15 Radio frequency devices Subpart B Unintentional radiators CAUTION B gt Servicing the machines can only be done by an authorized Kramer technician Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment Use the supplied DC power supply to feed power to the machine B gt Please use recommended interconnection cables to connect the machine to other components FCC and CE approved using STP cable for twisted pair products For the latest information on our products and a list of Kramer distributors visit our Web site www kramerelectronics com where updates to this user manual may be found We welcome your questions comments and feedback Safety Warning Disconnect the unit from the power supply before opening servicing Caution 9007 O 2 QU a Institute of Quality amp Control Kramer Electronics Ltd Web site www kramerelectronics com E mail info kramerel com P N 2900 000560 REV 1
3. Kramer Electronics Ltd USER MANUAL Rack Adapter Model RK 622 Contents Contents 1 Introduction 2 Getting Started 2 1 Recommendations for Best Performance 3 Overview 4 Your Kramer RK 622 Rack Adapter 5 Mounting the 622 on the Kramer RK 622 Rack Adapter 5 1 Mounting an Aluminum Housing Unit 3 2 Mounting an Extrusion Housing Unit 5 3 Connecting a Blank Panel to the RK 622 6 Technical Specifications Figures Figure 1 RK 622 Rack Adapter Figure 2 Connecting the Side Bracket Figure 3 RK 622 Rack Adapter Connecting the 622 Aluminum Figure 4 RK 622 Rack Adapter Connecting the 622 Extrusion Figure 5 RK 622 Rack Adapter Connecting a Blank Panel Tables Table 1 Technical Specifications of the RK 622 NH nfWwOe NY NK UU Bu wn Introduction 2 1 Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unique creative and affordable solutions to the vast range of problems that confront the video audio presentation and broadcasting professional on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 11 groups that are clearly defined by function Congratulations on purchasing your Kramer RK 622 rack adapter which is designed for mounting the Kramer 622T and 622R in a 19 rack The package includes the following items e RK 622 R
4. ack Adapter e Additional mechanical parts screws nuts and so on 3 e This user manual Getting Started We recommend that you e Unpack the equipment carefully and save the original box and packaging materials for possible future shipment e Review the contents of this user manual The RK 622 does not have to be filled with mounted units Use a blank panel to fill the empty space Recommendations for Best Performance We recommend that you e Have a Philips screwdriver available e Disconnect the mains voltage and all cables connected to each machine that is being mounted in the rack adapter before proceeding with the installation e Connect only good quality connection cables thus avoiding interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables 1 GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Matrix Switchers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters GROUP 11 Sierra Products 2 An optional one half 19 blank panel is available for purchase P N 2636 000979 3 Download up to date Kramer user manuals from the Internet at this URL http www kramerelectronics com Overview e Avoid interfere
5. nce from neighboring electrical appliances and position your rack adapter on the rack away from moisture excessive sunlight and dust 3 Overview You can mount one or two Kramer 622 units in a 19 1U rack The 622 units are manufactured in two versions an Aluminum box or an extrusion type box 4 Your Kramer RK 622 Rack Adapter The example in Figure 1 illustrates the mounting of two 622 units Figure 1 RK 622 Rack Adapter 1 622 refers to 622T and or 622R 2 KRAMER SIMPLE CREATIVE TECHNOLOGY Mounting the 622 on the Kramer RK 622 Rack Adapter 5 Mounting the 622 on the Kramer RK 622 Rack Adapter This section describes how to mount 622T and 622R units with an e Aluminum type housing see section 5 1 e Extrusion type housing see section 5 2 5 1 Mounting an Aluminum Housing Unit To mount the 622 units on the RK 622 do the following 1 Connect the side bracket to the 622 unit as illustrated in Figure 2 BP258R SCREW CONUS BLACK M3x8 BP258L 622R T Al SCREW CONUS BLACK M3x8 622R T AL Figure 2 Connecting the Side Bracket 2 Place the first 622 unit with the side bracket on the rack 3 Hold both the 622 and the RK 622 with your hands and turn them upside down 4 Insert the appropriate amount of screws through the holes on the RK 622 that fit the holes on the underside of the 622 using the screws supplied with the unit as illustrated in Figure 3 Mounting the 622 on
6. rwise interfered with 3 Damage deterioration or malfunction resulting from i Accident misuse abuse neglect fire water lightning or other acts of nature ii Product modification or failure to follow instructions supplied with the product iii Repair or attempted repair by anyone not authorized by Kramer iv Any shipment of the product claims must be presented to the carrier v Removalor installation of the product vi Any other cause which does not relate to a product defect vii Cartons equipment enclosures cables or accessories used in conjunction with the product WHAT WE WILL PAY FOR AND WHAT WE WILLNOT PAY FOR We will pay labor and material expenses for covered items We will not pay for the following 1 Removal orinstallations charges 2 Costs of initial technical adjustments set up including adjustment of user controls or programming These costs are the responsibility of the Kramer dealer from whom the product was purchased 3 Shipping charges HOW YOU CAN GET WARRANTY SERVICE 1 To obtain service on you product you must take or ship it prepaid to any authorized Kramer service center 2 Whenever warranty service is required the original dated invoice or a copy must be presented as proof of warranty coverage and should be included in any shipment of the product Please also include in any mailing a contact name company address and a description of the problem s 3 For the name of the nearest Kramer au
7. the Kramer RK 622 Rack Adapter SCREW CONUS BLACK M3x8 SCREW CONUS BLACK M3x5 Figure 3 RK 622 Rack Adapter Connecting the 622 Aluminum Tighten the screws Rotate the 622 horizontally with the unit connected Place the next 622 unit next to the unit that is already mounted DADA Repeat steps 2 to 4 for the second unit 5 2 Mounting an Extrusion Housing Unit To mount the 622 units on the RK 622 do the following 1 Place the first 622 unit on the rack 2 Hold both the 622 and the RK 622 with your hands and turn them upside down 3 Insert the appropriate amount of screws through the holes on the RK 622 that fit the holes on the underside of the 622 using the screws supplied with the unit as illustrated in Figure 4 Tighten the screws Rotate the 622 horizontally with the unit connected Place the next 622 unit next to the unit that is already mounted IND W Repeat steps 2 to 4 for each other unit 4 KRAMER SIMPLE CREATIVE TECHNOLOGY Mounting the 622 on the Kramer RK 622 Rack Adapter SCREW CONUS BLACK M3x5 Figure 4 RK 622 Rack Adapter Connecting the 622 Extrusion 5 3 Connecting a Blank Panel to the RK 622 You can connect a blank panel to the RK 622 to cover any empty spaces as the example in Figure 5 illustrates BLANK PANEL F661 Part No 2636 000979 SCREW CONUS BLACK M3x5 Figure 5 RK 622 Rack Adapter Connecting a Blank Panel 1 Specified in section
8. thorized service center consult your authorized dealer LIMITATION OFIMPLIED WARRANTIES All implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty EXCLUSIONOFDAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option Kramer shall not be liable for 1 Damage to other property caused by defects inthis product damages based upon inconvenience loss ofuse of the product loss of time commercial loss or 2 Any other damages whether incidental consequential or otherwise Some countries may not allow limitations on how long an implied warranty lasts and or do not allow the exclusion or limitation of incidental or consequential damages so the above limitations and exclusions may not apply to you This warranty gives you specific legal rights and you may also have otherrights which vary from place to place NOTE All products returned to Kramer for service must have prior approval This may be obtained from your dealer This equipment has been tested to determine compliance with the requirements of EN 50081 Electromagnetic compatibility EMC generic emission standard Part 1 Residential commercial and lightindustry EN 50082 Electromagnetic compatibility EMC generic immunity standard Part 1 Residential commercial and light industry environment CFR 47 FCC
Download Pdf Manuals
Related Search