Kramer Electronics PTH-1 Second Wing
Contents
1. gaps Supports one or two wings and is attached to the pole Feature 1 Wing Conical M3x5 Screws 4 2 U type Screw Hose Clamp supplied 3 Tool bracket 1 per wing 4 Wing 5 Locking Allen Screws 6 Hose Clamp Gaps T7 Hinge Mounting the PTH 1 The hinge with one or two wings attached is mounted on the projector column by fastening the Hose Clamp around the projector column see Figure 3 or when using the U type screw by tightening the screw nuts to fix the PTH 1in place see Figure 4 When mounting the PTH 1 e When using the Hose Clamp to mount the PTH 1 thread the band through the Hose Clamp gaps see Figure 3 on the hinge before attaching the second wing to the PTH 1 then use the four M3x5 screws to attach the second wing to the PTH 1 If you are using the U Type screw to mount the PTH 1 insert the U Type screw through the hinge holes and tighten with washer spring and Hex nuts see Figure 4 Figure 3 Fastening with the Hose Clamp Place the Tool bracket in the desired position and mount the V4 20 UNC Hex Nut Tool a Lock Washer Spring fa 20 x2 U Type Screw Set the wings in the horizontal or vertical upwards or downwards position by removing the Allen screws and replacing them in the new position see Figure 7 Figure 4 Fastening with the U Type Screw Mounting the Second Wing To mount the second wing first connect the Hinge bracket to the sec2. The PTH 1 Projector Bracket Kit Congratulations on purchasing your Kramer PTH 1 column mount which is ideal for mounting Kramer TOOLS and Kramer Pico TOOLS around a projector column of 1 to 2 in diameter You can add one of the optional kits defined in Table 1 to the PTH 1 Table 1 Optional Wing Kits Ordering Codes 60 100499 KIT PTH 1 G SEC SHELF PTH 1 Second Wing G Kramer TOOLS Kramer Pico TOOLS 1 8U 60 100299 KIT PTH 1 W SEC SHELF PTH 1 Second Wing W Extrusion and 1 4U Extrusion units 60 110499 KIT PTH 1 G LONG SHELF PTH 1 Long Wing G Kramer Mega TOOLS and 1 3U Extrusion units 60 110299 KIT PTH 1 W LONG SHELF PTH 1 Long Wing W The PTH 1 can be installed in the horizontal or vertical position downwards or upwards see Figure 7 Figure 1 Figure 2 and Table 2 define the PTH 1 Figure 2 PTH 1 Horizontal Connection with additional wing Figure 1 PTH 1 Vertical Connection Downward Table 2 PTH 1 Features Function Four screws on each side for attaching the wing to the hinge Supports the PTH 1 when mounted on the column Set in the correct position for connecting a Kramer TOOLS and or Pico TOOLS unit PTH 1 includes one wing an optional wing can be added see Table 1 To change the wing position remove the two Allen screws from the wing sides turn the wing to the desired position and tighten screws When using the U band thread the band through the
3. ond wing and then connect the hinge bracket to the hinge as illustrated in Figure 5 for the second wing and in Figure 6 for the long wing Short Wing M3x6 Conus Screw Figure 5 Mounting the Second Wing Figure 6 Mounting the Long Wing Figure 7 shows how to set a wing to the horizontal or vertical position e Locking Allen Screw oO Horizontal Position Locking Allen Screw Vertical Position A _ LI O m H 7o Figure 7 Setting the Wing Position PTH 1 Column Mounting Installation Instructions Designed for Kramer TOOLS Kramer Pico TOOLS Kramer 1 8U 1 4U and 1 3U Extrusion TOOLS Kramer Mega TOOLS For the latest information on our products and a list of Kramer distributors visit our Web site www kramerelectronics com CE Kramer Electronics Ltd Web site www kramerelectronics com E mail info kramerel com P N 2900 0005 74 REV 3
Download Pdf Manuals
Related Search