Home

Steinberg CC121

1. In this event give back the product back to where you have purchased it inc all written material the complete undamaged packing as well as the enclosed hardware immediately but at the latest within 14 days in return for a refund of the purchase price 1 Definitions 1 1 Software includes i software files and other computer information of Steinberg and third parties ii demo songs and audio and video files contained therein iii written documentation manual belonging thereto and iv all modified versions and copies which are provided by Steinberg in the form of updates upgrades patches and enhancements of Steinberg provided that these are not regulated by another agreement 1 2 The software and all authorized copies of this software which you make are the intellectual property of Steinberg Media Technologies GmbH hereinafter Steinberg and their suppliers The structure organization and code of 24 CC121 Operation Manual the software constitute valuable trade secrets of Steinberg and their suppliers The software is legally protected in particular by the copyright law of the Federal Republic of Germany and other countries as well as by international treaties 2 Grant of License 2 1 Steinberg grants you a non exclusive license for the use of the software according to the terms and conditions of this Agreement You may not lease loan or sublicense the software 2 2 The samples of so called Loops a
2. United Plaza 1468 Nanjing Road West Jingan Shanghai China Tel 021 6247 2211 INDONESIA PT Yamaha Music Indonesia Distributor PT Nusantik Gedung Yamaha Music Center Jalan Jend Gatot Subroto Kav 4 Jakarta 12930 Indonesia Tel 21 520 2577 KOREA Yamaha Music Korea Ltd 8F 9F Dongsung Bldg 158 9 Samsung Dong Kangnam Gu Seoul Korea Tel 080 004 0022 MALAYSIA Yamaha Music Malaysia Sdn Bhd Lot 8 Jalan Perbandaran 47301 Kelana Jaya Petaling Jaya Selangor Malaysia Tel 3 78030900 SINGAPORE Yamaha Music Asia Pte Ltd 03 11 A Z Building 140 Paya Lebor Road Singapore 409015 Tel 747 4374 TATWAN Yamaha KHS Music Co Ltd 3F 6 Sec 2 Nan Jing E Rd Taipei Taiwan 104 R O C Tel 02 2511 8688 THAILAND Siam Music Yamaha Co Ltd 4 6 15 and 16th floor Siam Motors Building 891 1 Rama 1 Road Wangmai Pathumwan Bangkok 10330 Thailand Tel 02 215 2626 OTHER ASIAN COUNTRIES Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Naka ku Hamamatsu Japan 430 8650 Tel 81 53 460 2317 OCEANIA AUSTRALIA Yamaha Music Australia Pty Ltd Level 1 99 Queensbridge Street Southbank Victoria 3006 Australia Tel 3 9693 5111 NEW ZEALAND Music Works LTD P O BOX 6246 Wellesley Auckland 4680 New Zealand Tel 9 634 0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Naka ku Hamamatsu
3. button and JOG button Adjusting the parameter to which the mouse pointer is located g The assignable parameters to the Al KNOB are parameters that can be automated within the principal window and plug in software on Cubase Plug in soft ware compatible with the Al KNOB are the VST 3 plug ins included with Cubase as of July 2008 For the latest information about compatible plug in soft ware refer to the following URL http service steinberg de goto nsf show supportupdates_cc121_gb O LOCK button You can lock the parameter to be edited via the Al KNOB by turning this button on When you locate the mouse pointer to the desired parameter then turn the LOCK button on the Al KNOB will control the locked parameter regardless of the mouse pointer s position By turning the LOCK button off you can unlock the parameter to be edited and the Al KNOB can then be used to edit another parameter to which the mouse pointer is located Editing the locked parameter regardless of the mouse pointer s location JOG button When this button is turned on the Al KNOB will move the time position of the current project Rotating the Al KNOB clockwise will move the time position for ward while rotating the Al KNOB counter clockwise will move the time position backward When turning on the LOCK button as well as JOG button the moving time position will not stop even if you release the Al KNOB You ca
4. 14 3 If any stipulation of this Agreement should be or become invalid in whole or in part this shall not affect the validity of the remaining stipulations The invalid stipulation shall be deemed to be replaced by the parties with a valid reg ulation which comes as close as possible to the commer cially desired purpose originally intended for the ineffective provision the same shall apply in the case of a lacuna 14 4 This Agreement shall be governed and construed by the laws of the Federal Republic of Germany and the UN Con vention on the International Sale of Goods CISG shall not apply 14 5 The exclusive place of jurisdiction with respect to all dis putes based on or in connection with this Agreement shall be Hamburg Steinberg can bring an action against you at your general place of jurisdiction CC 121 Operation Manual 21 For details of products please contact your nearest Steinberg representative or the authorized distributor listed below Pour plus de d tails sur les produits veuillez vous adresser Steinberg ou au distributeur le plus proche de vous figurant dans la liste suivante Die Einzelheiten zu Produkten sind bei Ihrer unten aufgef hrten Niederlassung und bei Steinberg Vertragsh ndlern in den jeweiligen Bestimmungsl ndern erh ltlich Para detalles sobre productos contacte su tienda Steinberg m s cercana o el distribuidor autorizado que se lista debajo NORTH AMERICA ASI
5. 7 Troubleshooting 22 About the Included Disks 0 00010001e 1010 7 Specifications 22 Turning the Power On and Off 8 License Agreement for TOOLS for CC121 23 Software Installation 10 License Agreement for Cubase Al 4 24 Starting the CC121 and Cubase 14 6 cc121 Operation Manual m 2 Q m N I Package Contents The CC121 package contains the following items After opening the CC121 package make sure that it includes all of the items listed below CC121 AC power adaptor PA 3C PA 130 or equivalent CC121 Operation Manual this book USB cable TOOLS for CC121 CD ROM Cubase AI 4 DVD ROM May not be included depending on your particular area Please check with your Steinberg Yamaha dealer About the Included Disks Disk Contents Each of the included disks contains the following software driver TOOLS for CC121 CD ROM Steinberg CC121 Extension installer USB MIDI driver Cubase Al 4 DVD ROM Cubase Al 4 Windows Macintosh IMPORTANT Before breaking the seal of these disk packages please read carefully the Software License Agreement on page 23 and 24 of this manual By opening the each of disk packages you indicate your agreement with the use terms of the software and concurrence with the Software License Agreement Special Notices CAUTION Steinberg and Yamaha make no representations or
6. THE TERMS OF THIS LICENSE IF YOU DO NOT AGREE WITH THE TERMS DO NOT INSTALL COPY OR OTHERWISE USE THIS SOFTWARE 1 GRANT OF LICENSE AND COPYRIGHT 3 TERMINATION Yamaha hereby grants you the right to use one copy of the soft This Agreement becomes effective on the day that you receive ware program s and data SOFTWARE accompanying this the SOFTWARE and remains effective until terminated If any Agreement The term SOFTWARE shall encompass any copyright law or provisions of this Agreement is violated the updates to the accompanying software and data The SOFT Agreement shall terminate automatically and immediately with WARE is owned by Yamaha and or Yamaha s licensor s and is out notice from Yamaha Upon such termination you must protected by relevant copyright laws and all applicable treaty immediately destroy the licensed SOFTWARE any accompany provisions While you are entitled to claim ownership of the data ing written documents and all copies thereof created with the use of SOFTWARE the SOFTWARE will con tinue to be protected under relevant copyrights You may use the SOFTWARE on a single computer You may make one copy of the SOFTWARE in machine readable form for backup purposes only ifthe SOFTWARE is on media where such backup copy is permitted On the backup copy you must reproduce Yamaha s copyright notice and any other proprietary legends that were on the original copy of the SOFTWARE You may permanently transfer
7. When the lamp is lit continuously communication with the computer is enabled and Link functions are avail able IMPORTANT To use the Link function between the CC121 and Cubase you will need to install Cubase Cubase Al version 4 5 or higher For details refer to the following website http service steinberg de goto nsf show supportupdates_cc121_gb This section lets you control the track selected on Cubase When the Read Automation is turned on the events generated via the operations in this sec tion will be recorded to the current track on Cubase Fader This 100 mm touch sensitive motorized fader lets you control the mixer fader of the current track on Cubase CG121 Operation Manual 15 g The motorizing function of the fader is available only when the AC power adaptor is connected to the CC121 The touch sensitivity of the fader can be adjusted Refer to Adjusting the touch sensitivity of the fader on page 21 for details O PAN knob Controls the PAN parameter I M Mute button Turns the Mute on or off O IS Solo button Turns the Solo on or off O LR Read Automation button Turns the Read Automation on or off O W Write Automation button Turns the Write Automation on or off O x Monitoring button Turns the Monitoring on or off o Record Enable button Alternately enables and disables recording O e Edit Channel settings butto
8. a password Enter the password for the Administrator s account If you have not set the password click OK without entering the password 1 2 Press the STANDBY ON switch of the CC121 to set it to the ON position The CC 121 will be recognized by the con nected Mac computer This completes installation of the necessary soft ware Uninstalling the Software 5 Open the Extensions_ folder on the CD ROM then double click the file Steinberg CC121 Extension pkg A Welcome to the InstallShield Wizard for Steinberg CC121 Extension window appears Gg If a dialog box appears asking if you want to install the software click Continue 6 Click Continue Gg If Steinberg CC 121 Extensions has been installed it will be overwritten by the new installed version 7 Execute the installation by following the on screen directions g Only the boot disk can be selected for the installer 8 When a message appears indicating that the installation is complete click Close Installing USB MIDI Driver 9 Open the USBdrv_ folder on the CD ROM then double click the file YAMAHA USB MIDI v mpkg Welcome to the USB MIDI Driver Installer window appears g Asterisks in the file name above indicate the ver sion number 1 0 When the Welcome to the USB MIDI Driver Installer window appears click Continue Removing Steinberg CC121 Extension Select
9. computer to the USB TO HOST terminal make sure to observe the follow ing cautions Failing to do so risks freezing the computer and corrupting or even losing the data If the computer or the device freezes restart the application software or the computer OS or turn the power to the device off then on again A CAUTION Use an AB type USB cable of 1 5 meters or less Before connecting the computer to the USB TO HOST terminal exit from any power saving mode of the computer such as suspended sleep standby Before turning on the power to the device connect the computer to the USB TO HOST terminal Quit any open application software on the com puter before turning the power to the device on off or plugging unplugging the USB cable to from the USB TO HOST terminal While a USB device is connected to the device you should wait for six seconds or more between these operations 1 when turning the power of the device off then on again or 2 when alternately connecting dis connecting the USB cable CC121 Operation Manual 9 m 2 Q m N I Software Installation To usethe CC121 you must first install the software on the computer This section explains the software installation Install Cubase Al 4 before you install TOOLS for CC121 Gg If you have already installed a version of Cubase such as Cubase 4 5 that is compatible with operation with the CC121 page 15 the instructions on installing Cubase Al
10. g the product activa tion shall not be possible following the assignment of rights 10 Upgrades and Updates 10 1 You must have a valid license for the previous or more inferior version of the software in order to be allowed to use an upgrade or update for the software the Trial Ver sion Software however does not entitle to the upgrade or update Upon transferring this previous or more inferior version of the software to third parties the right to use the upgrade or update of the software shall expire 10 2 The acquisition of an upgrade or update does not in itself confer any right to use the software 10 3 The right of support for the previous or inferior version of the software expires upon the installation of an upgrade or update 11 Limited Warranty Gew hrleistung 11 1 The warranty Gew hrleistung for you as first buyer of he software located within the European Union EU is specified in Subsection 11 2 and the warranty for you as irst buyer of the software located outside the EU is speci ied in Subsection 11 3 of this Agreement 11 2 Limited Warranty within the EU In the event that you as a irst buyer of the software are located within the EU the ollowing limitation of liability shall apply 11 2 1 f Steinberg has sold the software directly to you as an end user Steinberg warrants gew hrleistet that the soft ware essentially executes the functions described in the enclosed doc
11. in public without per mission of the copy HEREOF IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU QD OOS right owner OR ANY OTHER PERSON FOR ANY DAMAGES INCLUDING The encryption of data received by means of the SOFTWARE WITHOUT LIMITATION ANY DIRECT INDIRECT INCIDENTAL may not be removed nor may the electronic watermark be OR CONSEQUENTIAL DAMAGES EXPENSES LOST PROF modified without permission of the copyright owner ITS LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE MISUSE OR INABILITY TO USE THE SOFTWARE EVEN CC121 Operation Manual 23 IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES In no event shall Yamaha s total liability to you for all damages losses and causes of action whether in contract tort or otherwise exceed the amount paid for the SOFTWARE 7 THIRD PARTY SOFTWARE Third party software and data THIRD PARTY SOFTWARE may be attached to the SOFTWARE If in the written materials or the electronic data accompanying the Software Yamaha identifies any software and data as THIRD PARTY SOFTWARE you acknowledge and agree that you must abide by the provi sions of any Agreement provided with the THIRD PARTY SOFT WARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE Yamaha is not responsible in any way for the THIRD PARTY
12. the USB MIDI driver s installation li If a message The software you are installing has not passed Windows Logo Testing appears click Con tinue Anyway You do not need to abort the installa tion If the message does not appear proceed to the next step 1 3 When a message indicating installation is complete appears click Finish 1 4 When a window appears requiring you to m 2 Q m N I restart your computer appears follow the on screen instructions to restart the com puter The USB MIDI driver installation is complete This completes installation of the necessary soft ware Uninstalling the Software Before deleting each software first follow the steps below 1 2 Disconnect all other USB devices except mouse and keyboard from the computer Log on to the Administrator account Exit any open applications and close all open windows Removing Steinberg CC121 Extension 3 From the Start menu select Settings gt Control Panel gt Add or Remove Pro grams to display the Add or Remove Pro grams panel Click Change or Remove Programs located in the upper left then select Stein berg CC121 Extension from the list in the right panel To uninstall the software click Change Remove Remove A dialog box appears Follow the on screen instructions to remove the software Removing USB MIDI driver 3 4 Insert the TOOLS for CC121 CD ROM into the CD ROM d
13. warranties with regard to any problems while attempting to copy the disks or software and cannot be held responsible for the results of attempts to copy the data CAUTION These disks are NOT for audio visual purposes Do not attempt to play the disks on a CD DVD player Doing so may result in irreparable damage to your audio CD DVD player The software USB MIDI Driver Steinberg CC 121 Extension included in the TOOLS for CC121 CD ROM and the copyrights thereof are under exclusive ownership by Yamaha The software included in the Cubase Al 4 DVD ROM and the copyrights thereof are under exclusive ownership by Steinberg Media Technologies GmbH Copying reproduction of the software in whole or in part by any means is expressly forbidden without the written consent of the manufacturer For the latest information of the software contained in the accessory disk please see the site below Future upgrades of application and system software and any changes in specifications announced separately on the web site http service steinberg de goto nsf show supportupdates_cc121_gb C121 Operation Manual 1 System Requirements for Software The system requirements below are necessary for installing software included in the accessory disks TOOLS for CC121 and Cubase Al 4 g Note that the system requirements may be slightly different from those described below depending on the particular operating system Windows Macintosh OS Window
14. 11 2 2 CG121 Operation Manual 5 introduction Thank you for purchasing the ADVANCED INTEGRATION CONTROLLER CC121 If you are using Cubase the CC121 is a highly intuitive indispensable aid in recording editing and sound shaping Simply connect the CC121 to a com puter via USB and you ve got a comprehensive control center and seamless environment for complete music produc tion with Cubase Please read the Operation Manual this book so that you can take full advantage of its superlative features and enjoy trouble free operation for years to come After reading this manual please keep it available for future reference Main Features Dedicated Remote Control for Cubase The CC121 serves as a comprehensive control surface for Cubase versions that are compatible with the Link func tion such as Cubase 4 5 and Cubase Al 4 5 see page 15 Simply connect the CC121 to a computer via a USB cable and enjoy a hardware software link specifically designed to give you tremendous efficiency and speed in your work flow within the Cubase environment Smooth Parameter Control with the Al KNOB The CC121 lets you mouse over a desired parameter within Cubase and adjust or control it by simply using the Al KNOB on the front panel In addition you can lock operation so that only one specific parameter is controlled regardless of where the mouse is located by turning on the LOCK button This gives you quick constant conve nient control over a d
15. 4 described below are not necessary Jump to the next sec tion Installation using TOOLS for CC 121 Installing Cubase Al 4 IMPORTANT Before breaking the seal of the Cubase Al 4 DVD ROM package please read carefully the Steinberg Software End User License Agreement EULA on page 24 of this manual By opening the disk package you indicate your agree ment with the use terms of this software and concurrence with the Software License Agreement 1 Start the computer and log on to the Admin 6 istrator account 2 In order to have continuous use of Cubase Al 4 Insert the Cubase Al 4 DVD ROM into the including support and other benefits you will need to DVD ROM drive register the software and activate your software license by starting it while the computer is connected to the Internet Click the Register Now button shown when the software is started then fill in all required fields for registration If you do not register the soft ware you will be unable to use it after a limited period of time expires 3 For a Windows computer open the Cubase Al 4 for Windows folder and double click on the CubaseAl4 msi file For a Macintosh computer open the Cubase Al4 for MacOS X folder and double click on the CubaseAl4 mpkg file Installing TOOLS for CC1 21 The CD ROM named TOOLS for CC121 consists of two software components Steinberg CC121 Extension and USB MIDI driver In particular you sh
16. A CANADA THE PEOPLE S REPUBLIC OF CHINA Yamaha Canada Music Ltd Yamaha Music Electronics China Co Ltd 135 Milner Avenue Scarborough Ontario M1S 3R 1 Canada Tel 416 298 1311 U S A Steinberg North America c o Yamaha Corporation of America 6600 Orangethorpe Ave Buena Park Calif 90620 U S A Tel 714 522 9011 CENTRAL amp SOUTH AMERICA MEXICO Yamaha de M xico S A de C V Calz Javier Rojo G mez 1149 Col Guadalupe del Moral C P 09300 M xico D F M xico Tel 55 5804 0600 BRAZIL Yamaha Musical do Brasil Ltda Rua Joaquim Floriano 913 4 andar Itaim Bibi CEP 04534 013 Sao Paulo SP BRAZIL Tel 011 3704 1377 ARGENTINA Yamaha Music Latin America S A Sucursal de Argentina Viamonte 1145 Piso2 B 1053 Buenos Aires Argentina Tel 1 4371 7021 PANAMA AND OTHER LATIN AMERICAN COUNTRIES CARIBBEAN COUNTRIES Yamaha Music Latin America S A Torre Banco General Piso 7 Urbanizaci n Marbella Calle 47 y Aquilino de la Guardia Ciudad de Panam Panam Tel 507 269 5311 EUROPE Steinberg Media Technologies GmbH Neuer Hoeltigbaum 22 32 22143 Hamburg Germany Tel 49 0 40 210 35 0 AFRICA Yamaha Corporation Asia Pacific Music Marketing Group Nakazawa cho 10 1 Naka ku Hamamatsu Japan 430 8650 Tel 81 53 460 2312 MIDDLE EAST Yamaha Music Gulf FZE LOB 16 513 PO Box 17328 Jubel Ali Dubai United Arab Emirates Tel 971 4 881 5868 STO1 25 F
17. Japan 430 8650 Tel 81 53 460 2312 HEAD OFFICE Steinberg Media Technologies GmbH Neuer Hoeltigbaum 22 32 22143 Hamburg Germany Tel 49 0 40 210 35 0 Steinberg Web Site http www steinberg net U R G Pro Audio 8 Digital Musical Instrument Division Yamaha Corporation O 2008 Yamaha Corporation This document is printed on chlorine free ECF paper Auf Umweltpapier gedruckt Ce document a t imprim sur du papier non blanchi au chlore Este documento se ha impreso en papel sin cloro alguno O steinberg
18. Library Application Support Stein berg components then delete the files named cc121_extension bunale Removing USB MIDI driver To uninstall the driver delete the following files Each user folder in Users Library Prefer ences gt jp co yamaha USBMIDIDriver plist Created after the Driver has been installed Library gt Audio gt MIDI Drivers gt YAMA HAUSBMIDIDriver plugin Library gt PreferencePanes gt YAMAHAUSB MIDIPatch prefPane Library gt Receipts YAMAHA USBMIDID river pkg Library gt Receipts YAMAHA USBMIDI Patch pkg g Only the administrator can delete the driver Normal users do not have the authority to delete CC121 Operation Manual 13 Starting the CC121 and Cubase Once installation page 10 has been successful the CC121 can be used at any time by following the simple proce dure below allowing the computer to recognize the CC121 1 Exit Cubase if it has already been started Cubase cannot recognize the CC121 if you turn on the power of the CC121 after starting Cubase Make sure to start Cubase after turning on the power of the CC121 2 Start the CC121 by executing the instructions of Turning the Power On and Off on page 8 then press the STANDBY ON switch of the CC121 to set it to the ON position IMPORTANT Make sure to use the same USB terminal as the one used
19. Operation Manual EN CC121 ADVANCED INTEGRATION CONTROLLER CUBASE READY O steinberg en O steinberg SPECIAL MESSAGE SECTION This product utilizes batteries or an external power sup ply adapter DO NOT connect this product to any power supply or adapter other than one described in the manual on the name plate or specifically recom mended by Steinberg Yamaha WARNING Do not place this product in a position where anyone could walk on trip over or roll anything over power or connecting cords of any kind The use of an extension cord is not recommended If you must use an extension cord the minimum wire size for a 25 cord or less is 18 AWG NOTE The smaller the AWG num ber the larger the current handling capacity For longer extension cords consult a local electrician This product should be used only with the components supplied or a cart rack or stand that is recommended by Steinberg Yamaha If a cart etc is used please observe all safety markings and instructions that accompany the accessory product SPECIFICATIONS SUBJECT TO CHANGE The information contained in this manual is believed to be correct at the time of printing However Steinberg Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units This product either alone or in combination with an amplifier and headphones or speaker s may be capable of produci
20. SOFTWARE or your use thereof Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE IN ADDITION YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MER CHANTABILITY AND FITNESS FOR A PARTICULAR PUR POSE as to the THIRD PARTY SOFTWARE Yamaha shall not provide you with any service or mainte nance as to the THIRD PARTY SOFTWARE Yamaha is not liable to you or any other person for any dam ages including without limitation any direct indirect inci dental or consequential damages expenses lost profits lost data or other damages arising out of the use misuse or inability to use the THIRD PARTY SOFTWARE 8 GENERAL This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws Any dispute or procedure shall be heard before the Tokyo District Court in Japan If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforce able the remainder of this Agreement shall continue in full force and effect 9 COMPLETE AGREEMENT This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accom panying written materials and supersedes all prior or contem poraneous understandings or agreements written or oral regarding the subject matter of this Agreement No amendment or revision of this Agreement w
21. TICE e This manual is the exclusive copyrights of Yamaha Corporation e The screen displays as illustrated in this manual are for instructional purposes and may appear somewhat different from the screens which appear on your computer This product incorporates and bundles computer programs and contents in which Steinberg Media Technologies GmbH and Yamaha Corporation own copyrights or with respect to which it has license to use others copyrights Such copyrighted materials include without limitation all computer software yle files MIDI files WAVE data musical scores and sound recordings Any unauthorized use of such programs and contents outside of personal use is ot permitted under relevant laws Any violation of copyright has legal consequences DON T MAKE DISTRIBUTE OR USE ILLEGAL COPIES opying of the commercially available musical data including but not limited to MIDI data and or audio data is strictly prohibited except for your personal se einberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH indows is a registered trademark of Microsoft Corporation in the United States and other countries pple Mac and Macintosh are trademarks of Apple Inc registered in the U S and other countries he company names and product names in this manual are the trademarks or registered trademarks of their respective companies e sos Cp Y gt 3
22. a first buyer of the software are located outside the EU the following limitation of liability shall apply 12 3 1 Except for the aforementioned rights Steinberg or Stein berg s authorized distributors assume no liability for loss damages claims or costs of any type direct or indirect damages including consequential damages arising from business interruptions injuries to persons or lack of due care or claims of third parties even if a representative of Steinberg was informed about the possibility of such losses damages costs or claims This limitation shall apply also in the event of a fundamental breach of this Agreement 12 3 2 The total liability of Steinberg and its distributors in the context of this Agreement shall be limited to the amount which was paid for the software if any 12 3 3 The aforementioned restrictions shall not apply in coun tries where a limitation of liability is inadmissible 13 Infringement You should inform Steinberg promptly in writing if a third party raises any claim against your use of the software Steinberg may defend you if you reasonably support Steinberg 14 Final Provisions 14 1 This Agreement constitutes the entire understanding of the subject matter between the parties Subsidiary agree ments have not been concluded 14 2 Supplements and amendments of this Agreement must be made in writing a waiver of the requirement of the written form must also be made in writing
23. alth from the assumption of a guarantee or from a procurement risk as well as Stein berg s liability for damages pursuant to the Product Liabil ity Act Produkthaftungsgesetz In the case of damage caused by the grossly negligent conduct of any other vicarious agents the liability shall be limited to those dam ages which are typically to be expected within the scope of an agreement such as the present one Any further lia bility under this Agreement shall be excluded 12 2 3 In the case of damage caused neither by intentional nor by the grossly negligent conduct of Steinberg Steinberg shall only be liable where an obligation is violated the ful fillment of which is of particular significance to the achievement of the contractual purpose cardinal obliga tion In this case the restrictions of liability pursuant to the foregoing subsection 12 2 2 sentences 2 and 3 shall apply In case of Trial Version Software the liability for damages according to this subsection shall be excluded 12 2 4 The liability for loss of data shall be limited to the typical cost and effort of retrieving the data which would have occurred if the data had been stored properly and in a risk adequate manner 12 2 5 This limitation of liability for Steinberg shall also apply for the benefit of Steinberg s employees in the event that any claims are filed directly against them 12 3 Limitation of Liability outside the EU In the event that you as
24. articu connections are given here larly when the computer is under battery power IMPORTANT you should make sure to set the STANDBY ON switch of the CC121 to STANDBY in order to save Connecting the power adaptor to the CC 121 and g Ge power and avoid draining the computer s battery turning on the power does not supply the CC121 with necessary power the power adaptor is merely an H auxiliary power source for the motorized fader The USB bus power function can be used only when 1 Make sure that the STANDBY ON switch on connecting the CC121 to a computer directly without the rear panel is in the STANDBY position using a hub or when connecting the CC121 to a 9 a computer via a self powered USB hub This function Connect the USB TO HOST terminal on the cannot be used when connecting the CC121 to a rear panel to the computer by using a USB computer via a bus powered USB hub cable Now you are ready to turn on the power When 3 Connect the power adaptor s DC cable to the you want to activate the fader as the touch sen DC IN jack on the rear panel of the CC121 sitive motorized fader go to step 3 8 cc121 Operation Manual 4 Securely connect the power adaptor to a standard household power outlet ANNA Uy WARNING emm O O steinberg e Use only the included power adaptor PA 3C or PA 130 or an equivalent recommended by Yamaha Use of a different adaptor may result in equipment damage overheating or fire Doing
25. ause unexpected stopping of the fader even if you do not touch it Adjust the touch sensitivity page 21 Connectors USB TO HOST terminal FOOT SW jack DC IN jack Power Supply Yamaha USB bus powered 5V 500mA Power adaptor for driving the motorized fader PA 3C PA 130 or equivalent recommended by Power Consumption USB bus powered 1 5W Power adaptor for driving the motorized fader 5W Dimensions 284 x 72 x 185 mm WxHxD Weight 1 5kg Accessories Power adaptor PA 3C PA 130 or equivalent USB cable CD ROM TOOLS for CC 121 DVD ROM Cubase Al 4 Operation Manual this book Specifications and descriptions in this manual are for information purposes only Steinberg Yamaha Corp reserves the right to change or modify products or specifications at any time without prior notice Since specifi cations equipment or options may not be the same in every locale please check with your Steinberg Yamaha dealer 22 CC121 Operation Manual License Agreement for TOOLS for CC121 ATTENTION SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT AGREEMENT CAREFULLY BEFORE USING THIS SOFTWARE YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREE MENT THIS AGREEMENT IS BETWEEN YOU AS AN INDIVIDUAL OR LEGAL ENTITY AND YAMAHA CORPORATION YAMAHA BY BREAKING THE SEAL OF THIS PACKAGE YOU ARE AGREEING TO BE BOUND BY
26. autions listed below to avoid the possibility of physical injury to you or others or damage to the instrument or other property These precautions include but are not limited to the following Power supply AG power adaptor e When removing the electric plug from the instrument or an outlet e Do not expose the instrument to excessive dust or vibrations or always hold the plug itself and not the cord extreme cold or heat such as in direct sunlight near a heater or in a e Unplug the AC power adaptor when not using the instrument or car during the day to prevent the possibility of panel disfiguration or during electrical storms damage to the internal components e Do not connect the instrument to an electrical outlet using a e Do not use the instrument in the vicinity of a TV radio stereo multiple connector Doing so can result in lower sound quality or equipment mobile phone or other electric devices Otherwise the possibly cause overheating in the outlet instrument TV or radio may generate noise Do not place the instrument in an unstable position where it might accidentally fall over Before moving the instrument remove all connected adaptor and other cables 3 11 1 2 4 cc121 Operation Manual m 2 Q m N I e When setting up the product make sure that the AC outlet you are Handling caution using is easily accessible If some trouble or malfunction occurs Donati S ot insert a
27. d on the VST Connections window of the Control Room by press ing one of the FUNCTION 1 4 buttons then adjust the output level by rotating the VALUE knob Pressing the VALUE knob will turn the Studio on or off VALUE When Monitor Control is selected You can select the desired Monitor created on the VST Connections window by pressing one of the FUNCTION 1 4 buttons then adjust the monitor output level by rotating the VALUE knob Pressing the VALUE knob will turn the Control Room s output on or off VALUE H ggg 18 era Operation Manual When User Assignable is selected You can freely assign desired parameters to the VALUE knob FUNCTION 1 4 buttons and foot switch connected to the FOOT SW jack page 20 The parameter assignment can be performed in the Device Setup window called up via Device Setup under the Devices menu After selecting Steinberg CC121 under Remote Devices in the Devices box then selecting User Assignable set the following parameters Device Setup Zoom Out Zoom in Zoom Out Vertical Zoom In Vertical a si DirectX Full Duplex Driver Mackie Control Quick Control O User Commands Select the desired function for the FUNCTION 1 4 buttons Fnuction1 Function4 and foot switch connected to the FOOT SW jack by clicking the Category column and Commana column O Res
28. en this is selected you can assign desired parameters to the buttons and knob in the Function section For information about instructions on assign ing the parameter refer to page 18 li If you are using Cubase Al 4 which does not feature the Control Room function only User Assignable Function is available from the above three function sets The Function sets can be selected from the Device Setup window called up via Device Setup under the Devices menu on Cubase From this window select Steinberg CC 121 under Remote Devices in the Devices box then select the desired Function set at the Bank column at the bottom right corner of the window Remote Devices Mackie Control Quick Controls berg 00121 Zoom Out Zoom Zoom In ques Display Zoom Zoom Out Vertical Video Zoom Zoom In Vertical ve Video Player d Transport 1 te VST Audio System ASIO DirectX Full Duplex Driver Studio Manager VST System Link Co x C C121 Operation Manual 11 The Controls and Connectors O VALUE knob button Rotating this knob adjusts the volume level of the assigned function while pressing the knob turns the assigned function on or off O FUNCTION 1 4 buttons Selects the parameter operated by the VALUE knob The pressed button lights allowing you to confirm which button is selected When Studio Control is selected You can select the desired studio create
29. esired parameter no matter where you are in the Cubase environment Intuitive Audio Editing and Transport The VST Audio Channel Settings window including EQ settings and the Transport section of Cubase can be con trolled directly from the CC121 In addition you can create automated mixing by using the touch sensitive motorized fader and intuitively control the EQ parameters by using the knobs Each of the panel buttons light or flash in the same color as that of the corresponding button on Cubase meaning that you can confirm the current status of each function instantly Assignable FUNCTION buttons The FUNCTION 1 4 buttons on the front panel let you control various Cubase parameters allowing you to assign desired parameters to each of these buttons By using Cubase 4 5 or later the latest version of the Cubase series you can assign one of the two templates which include the settings for controlling the Control Room Mixer to these but tons USB bus powered The CC121 can be powered by the USB connection to your computer This means you can simply connect the CC121 to a USB terminal on your computer get full power and not have to worry about setting up an AC adaptor An AC adaptor has been included to provide motorized touch sensitive fader operation Table of Contents Introduction coccion 6 The Controls and Connectors 15 Main Features 6 Adjusting the touch sensitivity of the fader 21 Package Contents
30. et Resets all settings of User Commands to default setting Custom Assignment Set the desired function to the VALUE knob The fol owing four values can be set Rotating the VALUE knob adjusts the Metronome output level of metronome sound Level Pressing the VALUE knob switches the metronome sound on off Rotating the VALUE knob adjusts the output level of main output Pressing the VALUE knob switches the mute on off Main Mix Volume Rotating the VALUE knob adjusts the Monitor output level of the Control Room CR Mixer Pressing the VALUE knob Volume alternately enables disables the Monitor output This value is available only for owners of Cubase 4 5 or later Rotating the VALUE knob adjusts the Phones output level of the Control Room CR Mixer Pressing the VALUE knob Phones alternately enables disables the Phones output This value is available only for owners of Cubase 4 5 or later E AI KNOB section e gt O This section lets you control a desired parameter specified via the mouse pointer and moving the cur rent position of the project Al KNOB This multi function knob can control a desired parameter within the principal window and plug in software on Cubase specified via the mouse pointer as long as the LOCK button and JOG button are turned off The assignable parameters to the Al KNOB change according to the on off status of the LOCK
31. finger or hand in any gaps on the instrument immediately turn off the power switch and disconnect the plug from 9 y gap the outlet Even when the power switch is turned off electricity is still flowing to the product at the minimum level When you are not using the product for a long time make sure to unplug the power cord from the wall AC outlet ever insert or drop paper metallic or other objects into the gaps on the panel If this happens turn off the power immediately and unplug the power cord from the AC outlet Then have the instrument inspected by qualified Steinberg Yamaha service personnel e Do not place vinyl plastic or rubber objects on the instrument since Maintenance this might discolor the panel or keyboard e Do not rest your weight on or place heavy objects on the instrument e When cleaning he instrument use a soft dry cloth Do not use paint and do not use excessive force on the buttons switches or thinners solvents cleaning fluids or chemical impregnated wiping connectors cloths e Do not use the instrument device or headphones for a long period of time at a high or uncomfortable volume level since this can cause permanent hearing loss If you experience any hearing loss or inging in the ears consult a physician Steinberg Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument or data that is lost or destroyed SPECIAL NO
32. ful copying If you do not accept the terms and con ditions of this Agreement the software will not work In such a case the product including the software may only be returned within 14 days following acquisition of the product Upon return a claim according to 11 shall not apply 4 Support Upgrades and Updates after Product Registration 4 1 4 2 4 3 You can only receive support upgrades and updates fol lowing the personal product registration Support is pro vided only for the current version and for the previous version during one year after publication of the new ver sion Steinberg can modify and partly or completely adjust the extent of the support hotline fora on the website etc Upgrades and updates at any time In case of Trial Version Software there exists no product registration or any sup port upgrades or updates The product registration is possible during the activation process or at any time later through the Internet In such a process you are asked to agree to the storage and use of your personal data name address contact email address date of birth and license data for the purposes specified above Steinberg may also forward these data to engaged third parties in particular distributors for sup port purposes and for the verification of the upgrade or update right If you provide an address outside the EU the data also can be transferred to third parties in countries which do not en
33. he button will set the touch sensitivity turn on the lamps of the pressed button and all buttons representing values below then store the specified value to the internal memory of the CC121 5 Confirm the result of the setting by touching the fader The lamp of the KEY Record button of the Transport section will light as soon as the CC121 recognizes that the fader is operated Repeat steps 4 5 to adjust the sensitivity After finishing the setting press the STANDBY ON switch to set it to the STANDBY position Now the setting is complete CC121 Operation Manual 21 Troubleshooting E The power of the instrument does not turn on Make sure that the CC121 is properly connected to the computer via a USB cable The USB bus power is necessary to use the CC121 The AC power adaptor is used as the auxiliary power sup ply for driving the motorized fader and cannot supply enough power necessary for using the CC121 as a controller for Cubase Confirm whether or not a proper USB cable is used If the USB cable is broken or damaged have the USB cable replaced with a known work ing one Use a USB cable no longer than 1 5 meters Confirm whether not the USB hub with the bus powered type is used for connecting the CC121 and computer If you must use USB hub use the self powered type E Cubase does not recognize the CC121 Make sure that the CC 121 is properly connected to the computer via a USB cable C
34. ill be binding unless in writing and signed by a fully authorized representative of Yamaha License Agreement for Cubase Al 4 Steinberg Software End User License Agreement EULA General All intellectual property rights in the software belong to Steinberg Media Technologies GmbH hereinafter Steinberg and its suppliers Steinberg permits you only to copy download install and use the software in accordance with the terms and condi tions of this Agreement The product may contain product activation for protection against unlawful copying which per mits a permanent use of the software only after the activation process has been totally completed The software can be used only together with the Steinberg key dongle and or the Soft eLicenser the OEM software can be used only following registration and Trial Version Software can be used only for a running time of 30 days You are only entitled to support and the right to upgrades or updates following a personal product registration however not for Trial Version Software Internet access is required for the activation process The terms and conditions for use of Steinberg software hardware by you the end user hereinafter termed Licensee appear below By installing the software on your computer you agree to these terms and conditions Please read the following text carefully in its entirety If you do not approve these terms and conditions you must not install this software
35. in the installation procedure when you connect the CC121 to the Windows computer again If you connect the USB cable to a different terminal you will have to install the USB MIDI driver again 3 Start Cubase The CUBASE READY lamp LED on the front panel lights indicating that the computer recognizes the CC121 and the Link functions between the CC121 and Cubase are available Gg You can connect or disconnect the AC power adaptor to from the CC 121 while the STANDBY ON switch is set to ON CAUTION e As soon as you turn off the power of the computer connected to the CC121 make sure to press the STANDBY ON switch of the CC121 to set it to the STANDBY position 14 eco Operation Manual m 2 Q m Y I The Controls and Connectors Front Panel Channel sections page 15 EQ sections page 16 Function section page 17 lt a GEI l E SE il OBS mn CUBASE READY Luna lamp page 15 Le JCJ ee SELECT i E O steinberg i i Transport section page 17 Al KNOB section page 19 E CUBASE READY lamp E Channel sections O CUBASE READY This LED lamp indicates whether the CC121 is turned on or not and whether communication between the CC121 and the computer is enabled or not This lamp flashes to indicate that the CC121 is bus powered from the connected computer
36. is in your possession The use of the software within a network is illegal where there is the possibility of a contemporaneous multiple use of the program You are entitled to prepare a backup copy of the software which will not be used for purposes other than storage purposes You shall have no further right or interest to use the soft ware other than the limited rights as specified in this Agreement Steinberg and their suppliers reserve all rights not expressly granted For Steinberg products including Fraunhofer mp3 coding technology the following reference from Thomson Licens ing S A is effective Supply of this product does not con vey a license nor imply any right to distribute content created with this product in revenue generating broadcast systems terrestrial satellite cable and or other distribu tion channels streaming applications via Internet intra nets and or other networks other content distribution systems pay audio or audio on demand applications and the like or on physical media compact discs digital ver satile discs semiconductor chips hard drives memory cards and the like An independent license for such use is required For details please visit http mp3licensing com 3 Activation of the Software 91 3 2 Steinberg may use a compulsory activation of the software and a compulsory product registration of the OEM soft ware for license control to protect the software against unlaw
37. k OK in the dialog box Click Next to start the installation To cancel the installation click Cancel 7 When a message appears indicating that Steinberg CC121 Extension has been installed click Finish Installing USB MIDI Driver 8 Press the STANDBY ON switch of the CC121 to set it to the ON position The Found New Hardware Wizard window appears Some computers may take a while to display the win dow 9 Select Locate and install driver software Don t search online D ec Operation Manual 1 0 When a message appears prompting you to insert the included disk confirm that CD ROM has already been inserted then click Next This operation starts the USB MIDI driver s installation ly If the Would you like to install this device software message appears confirm that the publisher is YAMAHA CORPORATION then click Install 1 1 When a message appears indicating that the installation is complete click Finish The USB MIDI driver installation is complete Uninstalling the Software Before deleting each software first follow the steps below 1 Disconnect all other USB devices except mouse and keyboard from the computer 2 Log on to the Administrator account Exit any open applications and close all open windows Removing Steinberg CC121 Extension 3 From the Start menu select Control Panel gt Programs and Features to call up the Uninstall or cha
38. lif 90620 Telephone 714 522 9011 Type of Equipment ADVANCED INTEGRATION CONTROLLER Model Name CC121 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation See user manual instructions if interference to radio reception is sus pected This applies only to products distributed by YAMAHA CORPORATION OF AMERICA FCC DoC PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock short circuiting damages fire or other hazards These precautions include but are not limited to the following Power supply AG power adaptor Water warning e Onlyusethe voltage specified as correct for the instrument The e Do not expose the instrument to rain use it near water or in damp or required voltage is printed on the name plate of the instrument wet conditions or place containers on it containing liquids which e Use the specified adaptor PA 3C PA 130 or an equivalent might spill into any openings If any liquid such as water seeps into recommended by Yamaha only Using the wrong adaptor can result the in
39. n Opens closes the settings window for the selected channel Lal Edit Instrument button Opens closes the VST instrument settings window for selected track CHANNEL SELECT ES EM buttons Selects the track you want to control Read Automation Write Automation Mute Solo Record Enable Edit the channel settings Edit Instruments Monitoring 16 cc121 Operation Manual E EQ sections ALL BYPASS This section lets you adjust the parameters of the 4 band EQ built into the Audio track or Instrument track All necessary EQ parameters such as Q F G of each band EQ type selection and Bypass on off can be edited O Q knobs Adjusts the Q bandwidth of each EQ band O F Frequency knobs Adjusts the center frequency of each EQ band G Gain knobs Adjusts the gain of each EQ band ON buttons Turns each EQ band on or off O EQTYPE button When this button is turned on rotating any of the Q F and G knobs will select the type of the shape for the corresponding band instead of adjusting the Q F G parameter O ALL BYPASS button Switches EQ bypass on off E Transport section This section enables you to control the transport functions on Cubase O HB Previous button Moves the current position to the previous marker or the beginning of the project if there is no previous marker O EX Rewind button Rewind E3 Forward button Forwa
40. n stop the time position at any time by turning the LOCK button off Oa O 44 4 1 96 0 02 26 000 7 Kl lt lt Se gt le Time position slider CC 121 Operation Manual 19 Rear Panel d AN KI d 1 CC 121 STANDBY gt FOOT Sw Do IN 12v O steinberg o A au O STANDBY ON switch Press this switch to turn the power to the CC121 on or off standby page 9 O USB TO HOST terminal This terminal is used to connect the CC121 and the computer by using a USB cable Since the CC121 is bus pow ered the power can be supplied from the computer to the CC121 via this terminal FOOT SW jack This terminal is used to connect an optional foot switch letting you control a certain parameter of Cubase with your foot For details refer to When User Assignable is selected on page 18 O DCIN jack Connect the supplied AC power adaptor to this jack g Even though the CC 121 is properly bus powered from the host computer make sure to connect the AC power adaptor if you want to use the touch sensitivity and motorized functions of the top panel fader 20 cc121 Operation Manual Adjusting the touch sensitivity of the fader You can adjust the touch sensitivity of the fader over a range from 1 to 8 1 Press the STANDBY ON switch of the CC121 to
41. nd MIDI data remain the property of the respective rights holder Big Fish Audio 2 3 2 4 2 5 2 6 2 Inc Yamaha Corporation and other licensors and are licensed by Steinberg to you only for use in the creation of a live or recorded performance that includes the licensed samples as part of a derivative musical work created by the licensed end user This license includes the use of the samples and MIDI data the modification of the samples or MIDI data and the marketing of the derivative musical work without infringing any rights of copyright collecting societies and or the owners of copyrights in any samples and MIDI data The samples or MIDI data may not be included whether unmodified or as part of a derivative work in any sample or MIDI data library product If the software is protected by the Steinberg key alone you may install a license for the software on one or at most 3 computers which are in your possession The software may be used only on one of the computers at the same time by using the Steinberg key If the software i is pro tected by the Soft eLicenser alone or together with the Steinberg key or ii has been sold to the first end user together with other software and or hardware hereinafter OEM software or iii the software can be used only for a running time of 30 days hereinafter Trial Version Soft ware you may install and use a license for the software only on one computer which
42. ng sound levels that could cause permanent hearing loss DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable If you experience any hearing loss or ringing in the ears you should consult an audiologist IMPORTANT The louder the sound the shorter the time period before damage occurs Some Steinberg Yamaha products may have benches and or accessory mounting fixtures that are either sup plied with the product or as optional accessories Some of these items are designed to be dealer assembled or installed Please make sure that benches are stable and any optional fixtures where applicable are well secured BEFORE using Benches supplied by Steinberg Yamaha are designed for seating only No other uses are recommended NOTICE Service charges incurred due to a lack of knowledge relating to how a function or effect works when the unit is operating as designed are not covered by the manu facturer s warranty and are therefore the owners responsibility Please study this manual carefully and consult your dealer before requesting service ENVIRONMENTAL ISSUES Steinberg Yamaha strives to produce products that are both user safe and environmentally friendly We sin cerely believe that our products and the production methods used to produce them meet these goals In keeping with both the letter and the spirit of the law we want you to be aware of the following Battery Notice This prod
43. nge a program panel 4 Select the Steinberg CC121 Extension 5 Click the Uninstall Uninstall Change Follow the on screen instructions to remove the software g If the User Account Control window appears click Continue Removing USB MIDI Driver Insert the TOOLS for CC121 CD ROM into the CD ROM drive 4 Open the Uninstall folder in the USBdrv Vista folder on the CD ROM then double click the file uninstall exe Follow the on screen instructions to remove the software Gg If the User Account Control window appears click Continue 5 When a message appears prompting you to restart the computer for proper deletion of the Driver restart the computer by following the on screen instructions MH Macintosh Preparing to install 1 Make sure that the STANDBY ON switch of the CC121 is in the STANDBY a position 2 Disconnect all the devices other than the mouse and keyboard from the computer then connect the CC121 directly to the com puter without using a hub by using a USB cable 3 Start the computer and log on to the Admin istrator account 4 insert the TOOLS for CC121 CD ROM into the CD ROM drive Installing Steinberg CC121 Extension m 2 Q m D I 1 1 Follow the on screen instructions to install the software g Depending on your computer OS the Authenticate window or one similar to it will be displayed prompt ing you to enter
44. o distribute illegal data or data that violates public policy You may not initiate services based on the use of the SOFT WARE without permission by Yamaha Corporation Copyrighted data including but not limited to MIDI data for songs obtained by means of the SOFTWARE are subject to the ars restrictions which you must observe 5 DISCLAIMER OF WARRANTY ON SOFTWARE You expressly acknowledge and agree that use of the SOFT WARE is at your sole risk The SOFTWARE and related docu mentation are provided AS IS and without warranty of any kind NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT YAMAHA EXPRESSLY DISCLAIMS ALL WAR RANTIES AS TO THE SOFTWARE EXPRESS AND IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRAN TIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT OF THIRD PARTY GHTS SPECIFICALLY BUT WITHOUT LIMITING THE FORE OING YAMAHA DOES NOT WARRANT THAT THE SOFT ARE WILL MEET YOUR REQUIREMENTS THAT THE PERATION OF THE SOFTWARE WILL BE UNINTERRUPTED Data received by means of the SOFTWARE may not be used I OR THATIDEFECTSIN THE SOFTWARE WILL BE CORRECTED for any commercial purposes without permission of the copy right owner 6 LIMITATION OF LIABILITY Data received by means of the SOFTWARE may not be YAMAHA S ENTIRE OBLIGATION HEREUNDER SHALL BE TO duplicated transferred or distributed or played back or per PERMIT USE OF THE SOFTWARE UNDER THE TERMS formed for listeners
45. odel number serial number power requirements etc are located on this plate You should record the model number serial number and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase Model Serial No Purchase Date PLEASE KEEP THIS MANUAL 92 BP bottom FCC INFORMATION U S A 1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT This product when installed as indicated in the instructions contained in this manual meets FCC requirements Modifications not expressly approved by Yamaha may void your authority granted by the FCC to use the product 2 IMPORTANT When connecting this product to accessories and or another product use only high quality shielded cables Cable s supplied with this product MUST be used Follow all installation instructions Failure to follow instructions could void your FCC authorization to use this product in the USA 3 NOTE This product has been tested and found to comply with the requirements listed in FCC Regula tions Part 15 for Class B digital devices Compli ance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices This equipment generates uses radio frequencies and if not installed and used according to the instructions found in the users manual may cause in
46. on the computer con nected to the Internet which is subject to a separate licensing agreement 6 Defect and loss of the Steinberg key 6 1 In the case of a defect or damage to the Steinberg key Steinberg or a third party engaged by Steinberg will check the Steinberg key In the case of a legitimate claim the Steinberg key and the licenses included shall be replaced in return for a handling fee The licenses will only be replaced provided that they are licenses issued by Stein berg Further claims against Steinberg are excluded 6 2 Steinberg assumes no liability or obligation if the Stein berg key is mislaid as a result of loss theft or otherwise Steinberg reserves the right to block the licenses saved on the Steinberg key upon being notified by the registered user of the loss The licenses saved on the Steinberg key cannot be replaced 7 Modification of the software 7 1 A modification of the software is permitted only insofar as far as the software is capable of such modification in accordance with its intended function You may not decompile disassembe carry out reverse engineering or try in another manner to determine the source code of the software unless this is permitted by law Furthermore you must not modify the binary code of the software to bypass in any manner the activation function or the use of the license module Steinberg key and or Soft eLicenser 8 No Unbundling 8 1 The software usually contains a va
47. onfirm whether or not a proper USB cable is used If the USB cable is broken or damaged have the USB cable replaced with a known work ing one Use a USB cable no longer than 1 5 meters Confirm whether or not the CC 121 is turned on before starting Cubase If not do so Make sure that the USB MIDI driver and Steinberg CC121 Extension has been installed Specifications Windows XP only Make sure the Use Device ame As Port Name box is checked in the MIDI patch window called up by selecting Start gt Control Panel Yamaha USB MIDI Driver ake sure that CC 121 is selected as the port set ing on Cubase The port is described in the Device Setup window called up via Device Setup under the Devices menu when select ing Steinberg CC 121 under Remote Devices in he Devices box Confirm whether or not the Remote Control set ings on Cubase are proper Refer to the manual of Cubase E Cannot control Cubase even if you operate the fader of the CC121 Confirm whether or not the touch sensitivity of the fader is proper Adjust the touch sensitivity page 21 E The motorized fader does not work Confirm whether or not the AC power adaptor is connected The power supply via the AC power adaptor is necessary for driving the motorized fader as well as bus power from the host com puter Confirm whether or not the touch sensitivity of the fader is proper Excessive settings of the touch sensitivity may c
48. ould install Steinberg CC121 Extension to ensure optimum control over Cubase You should also install the USB MIDI Driver to enable proper communication between the CC121 and your computer Follow the instructions below to install those software components Gg Make sure to install a version of Cubase such as Cubase 4 5 or Cubase Al 4 5 that is compatible with the Link func tions before installing Steinberg CC 121 Extensions P Windows XP 4 Select Start gt Settings gt Control Panel click Switch to Classic View in the upper left of the window Preparing to install 5 Go to System gt Hardware gt Driver 1 Make sure that the STANDBY ON switch of Signing gt Driver Signing Options and the CC121 is in the STANDBY m position 2 Disconnect all the devices other than the my approval and click OK mouse and keyboard from the computer then connect the CC121 directly to the com 0 puter without using a hub by using a USB After completing the installation make sure to restore cable the original settings if necessary 3 Start the computer and log on to the Admin istrator account Exit any open applications and close all open windows 6 Close the System Properties window by clicking the OK button or the Close button X to close the Control Panel 10 cc121 Operation Manual select the radio button to the left of Ignore Install the software anyway and don t ask for 7 insert
49. rd O E Next button Moves the current position to the next marker E Cycle button Turns Cycle mode on and off E Stop button Stops the project playback IS Play button Plays back the project E Record button Records the track s of which the Record Enable but ton is turned on y You can control various functions such as the trans port section on Cubase with your foot for example for punch in recording ease by connecting a foot switch to the FOOT SW jack on the rear panel For information about instructions on assigning the func tion to the footswitch refer to When User Assign able is selected on page 18 EX Previous button EN Cycle button E Forward button MEN Play button E Rewind button MEN Stop button MEN Next button ON Record button E Function section VALUE v v v CIAJ This section lets you control the Control Room Mixer function and other functions on Cubase by assigning the desired functions to each of these buttons and knob The following function sets are available Studio Control When this is selected the Function section adjusts the studio level of the Control Room mixer For details see the next page Monitor Control When this is selected the Function section adjusts the monitor level of the Control room mixer For details see the next page User Assignable Wh
50. riety of different files which in its configuration ensure the complete functionality of the software The software may be used as one product only It is not required that you use or install all compo nents of the software You must not arrange components of the software in a new way and develop a modified ver sion of the software or a new product as a result The con figuration of the software may not be modified for the purpose of distribution assignment or resale 8 2 You may also not sell the Steinberg key separately as a license the usage rights always remain with the software in particular with the original software data carrier e g CD 9 Assignment of Rights 9 1 You may assign all your rights to use the software to another person subject to the conditions that a you assign to this other person i this Agreement and ii the software or hardware provided with the software packed or preinstalled thereon including all copies upgrades updates backup copies and previous versions which granted a right to an update or upgrade on this software b you do not retain upgrades updates backup copies 26 era Operation Manual und previous versions of this software and c the recipient accepts the terms and conditions of this Agreement as well as other regulations pursuant to which you acquired a valid software license 9 2 A return of the product due to a failure to accept the terms and conditions of this Agreement e
51. rive Open the Uninstall folder in the USBdrv2k folder on the CD ROM then double click the file uninstall exe Follow the on screen instructions to remove the software When a message appears prompting you to restart the computer for proper deletion of the Driver restart the computer by following the on screen instructions CC121 Operation Manual 11 E Windows Vista Preparing to install 1 Make sure that the STANDBY ON switch of the CC121 is in the STANDBY a position 2 Disconnect all the devices other than the mouse and keyboard from the computer then connect the CC121 directly to the com puter without using a hub by using a USB cable Start the computer and log on to the Admin istrator account 4 insert the TOOLS for CC121 CD ROM into the CD ROM drive Installing Steinberg CC121 Extension 5 Open the Extensions_ folder on the CD ROM then double click the file setup exe Welcome to the InstallShield Wizard for Steinberg CC121 Extension window appears g If the same version of Steinberg CC 121 Extensions has already been installed in your computer a soft ware Confirm Uninstall window appears In this case click Cancel If a newer version of Steinberg CC121 Extension has already been installed in your computer a dialog box appears indicating that the newer software has already been installed In this case you do not need to install the software Clic
52. s XP Professional XP Home OS Mac OS X 10 4 x Mac OS X 10 5 x Edition Vista 32bit CPU Pentium 1 4GHz or more CPU PowerPC G4 1GHz or Core Solo 1 5GHz or more Memory 512 MB Memory 512MB Display Display Resolution 1280 x 800 full color Resolution 1280 x 800 full color Interface Equipped with a USB connector Interface Equipped with a USB connector Hard Disk Free disk space of 1GB or more high Hard Disk Free disk space of 1GB or more high speed hard disk speed hard disk IMPORTANT e A DVD drive is required for installation e In order to have continuous use of Cubase Al 4 including support and other benefits you will need to register the software and activate your software license by starting it while the computer is connected to the Internet Turning the Power On and Off Power Supply CAUTION e While the CC121 is turned ON a Macintosh com To make the CC121 active connect the CC121 to puter connected to the CC121 via USB cannot your computer via a USB cable so that the power enter the power saving mode such as sleep and can be supplied from the computer to the CC121 To suspended even if you do not operate the com activate the motorized touch sensitive fader you ll puter for a long time When connected in this con need to also connect the AC power adaptor to the dition the CC121 continues to draw power from CC121 and a proper AC outlet Instructions for these the computer even if you are not using it P
53. set it to the STANDBY Mm posi tion then connect the CC121 to the com puter via a USB cable 2 Start the computer 3 Press the STANDBY ON switch to set it the ON position while holding the CHANNEL SELECT E button and CHANNEL SELECT button The CUBASE READY lamp will flash and the current setting of the touch sensitivity is indi cated by the on off status of the eight buttons show below in the Channel section When the touch sensitivity is set to 2 for example the W Read Automation button and I Edit Instrument button are turned on Lighting of these two buttons only indicates that the touch sensitivity is set to 2 m 2 Q m N I Press the button corresponding to the desired sensitivity following the list below A setting of 1 produces the most gradual response while a setting of 8 produces the most sensitive response Sensitivity Button 8 M Mute button 7 Tel Monitor button 6 S Solo button 5 Enable Record button 4 R Read Enable button 3 Channel Settings button 2 W Write Enable button 1 Edit Instrument button Touch gt sensitivity 8 M q Touch Eine F sten sj Touch Dr ouch ity 5 sensitivity 4 SEMSILVIIY ER EQ Touch e Touch SC H gt sensitivity 3 sensitivity2 y 1 4 Touch sensitivity 1 Pressing t
54. so will also immediately void the product warranty even if the effective warranty period has not expired e Wrap the DC output cable of the adaptor around the cable clip as shown below to prevent acciden tal unplugging of the cable during operation Avoid tightening the cord more than necessary or pulling on the cord strongly while it is wrapped around the cable clip to prevent wear on the cord or possible breakage of the clip O Rear panel e You can connect or disconnect the AC power adaptor to from the CC121 while the STANDBY ON switch is set to ON Turning the Power On and Off 1 To supply the power actually from the con nected host computer press the STANDBY ON switch on the rear panel to set it to the ON position To cancel the power supply from the con nected host computer press the STANDBY ON switch to set it to the STANDBY posi tion CAUTION e Note that a small amount of current continues to flow while the switch is in the STANDBY position If you do not plan to use the CC121 for an extended period of time please be sure to unplug the adap tor from the wall outlet e As soon as you turn off the power of the computer connected to the CC121 make sure to press the STANDBY ON switch of the CC121 to set it to the STANDBY position Precautions when using the USB TO HOST terminal When connecting the
55. strument turn off the power immediately and unplug the power in damage to the instrument or overheating cord from the AC outlet Then have the instrument inspected by Check the electric plug periodically and remove any dirt or dust qualified Steinberg Yamaha service personnel which may have accumulated on it e Never insert or remove an electric plug with wet hands Do not place the AC adaptor cord near heat sources such as heaters or radiators and do not excessively bend or otherwise damage the Fire warning cord place heavy objects on it or place it in a position where anyone could walk on trip over or roll anything over it e Do not put burning items such as candles on the unit A burning item may fall over and cause a fire Do not ope If you notice any abnormality Do not open the instrument or attempt to disassemble the internal e Ifthe AC adaptor cord or plug becomes frayed or damaged or if parts or modi y them in any way The instrument contains Tse there is a sudden loss of sound during use of the instrument or if serviceable parts Ai should appear to be malfunctioning any unusual smells or smoke should appear to be caused by it ey wee and S it inspected by qualified immediately turn off the power switch disconnect the adaptor plug einberg Yamaha service personnel from the outlet and have the instrument inspected by qualified Steinberg Yamaha service personnel CAUTION Always follow the basic prec
56. sure an adequate level of data protection compara ble to that applying within the EU 5 Licence module Steinberg key and or Soft eLicenser 5 1 5 2 5 3 5 4 Steinberg uses a hardware device connected through the USB connection of a computer hereinafter Steinberg key and or a protection scheme hereinafter Soft eLi censer for license control hardware and or software dongle in the case of many products The Steinberg key and or Soft eLicenser permanently saves the license infor mation and regulates access to the software If a Stein berg key is required for the use of the software then the Steinberg key must be connected physically to the com puter through the USB interface For the activation of the software updates or upgrades of the software the computer which is connected to the Steinberg key and or using the Soft eLicenser or using the OEM software must be connected to the server of SIA Syncrosoft through the Internet If the product was deliv ered with the Steinberg key the license information was already transferred to the Steinberg key If the product was delivered with a product card without the Steinberg key the activation codes of the enclosed product card must be entered manually by the user upon installation and the license information must be exchanged with the server of SIA Syncrosoft In the event of OEM software the activation codes will be send to an email address submitted by
57. terference harmful to the operation of other elec tronic devices Compliance with FCC regulations does not guarantee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the unit OFF and ON please try to elimi nate the problem by using one of the following mea sures Relocate either this product or the device that is being affected by the interference Utilize power outlets that are on different branch circuit breaker or fuse circuits or install AC line fil ter s In the case of radio or TV interference relocate reorient the antenna If the antenna lead in is 300 ohm ribbon lead change the lead in to co axial type cable If these corrective measures do not produce satis factory results please contact the local retailer authorized to distribute this type of product If you can not locate the appropriate retailer please con tact Yamaha Corporation of America Electronic Service Division 6600 Orangethorpe Ave Buena Park CA90620 The above statements apply ONLY to those prod ucts distributed by Yamaha Corporation of America or its subsidiaries This applies only to products distributed by YAMAHA CORPORATION OF AMERICA class B COMPLIANCE INFORMATION STATEMENT DECLARATION OF CONFORMITY PROCEDURE Responsible Party Yamaha Corporation of America Address 6600 Orangethorpe Ave Buena Park Ca
58. the TOOLS for CC121 CD ROM into the CD ROM drive Installing Steinberg CC121 Extension 8 Open the Extensions_ folder on the CD ROM then double click the file setup exe A Welcome to the InstallShield Wizard for Steinberg CC121 Extension window appears Gg If the same version of Steinberg CC 121 Extensions has already been installed in your computer a soft ware Confirm Uninstall window appears In this case click Cancel If a newer version of Steinberg CC 121 Extension has already been installed in your computer a dialog box appears indicating that the newer software has already been installed In this case you do not need to install the software Click OK in the dialog box 9 Click Next to start the installation To cancel the installation click Cancel 1 0 When a message appears indicating that Steinberg CC121 Extension has been installed successfully click Finish Installing USB MIDI Driver 11 Press the STANDBY ON switch of the CC121 to set it to the ON position The Found New Hardware Wizard window appears y Some computers may take a while to display the Wiz ard window A dialog box may appear asking you whether you wish to connect to Windows Update In this case select the radio button to the left of Not at this time then click Next 1 2 Select the radio button next to Install the software automatically then click Next This operation starts
59. to a third party all your rights in the SOFTWARE provided that you do not retain any cop ies and the recipient reads and agrees to the terms of this Agreement 4 LIMITED WARRANTY ON MEDIA As to SOFTWARE sold on tangible media Yamaha warrants that the tangible media on which the SOFTWARE is recorded will be free from defects in materials and workmanship under normal use for a period of fourteen 14 days from the date of receipt as evidenced by a copy of the receipt Yamaha s entire liability and your exclusive remedy will be replacement of the defective media if it is returned to Yamaha or an authorized Yamaha dealer within fourteen days with a copy of the receipt Yamaha is not responsible for replacing media damaged by accident abuse or misapplication TO THE FULLEST EXTENT PERMITTED BY LAW YAMAHA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES ON THE TANGIBLE MEDIA INCLUD 2 RESTRICTIONS ING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND You may not engage in reverse engineering disassembly FITNESS FOR A PARTICULAR PURPOSE decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever You may not reproduce modify change rent lease or dis tribute the SOFTWARE in whole or in part or create deriva tive works of the SOFTWARE You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a net work with other computers You may not use the SOFTWARE t
60. uct MAY contain a small non rechargeable battery which if applicable is soldered in place The average life span of this type of battery is approximately five years When replacement becomes necessary con tact a qualified service representative to perform the replacement This product may also use household type batteries Some of these may be rechargeable Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged When installing batteries do not mix batteries with new or with batteries of a different type Batteries MUST be installed correctly Mismatches or incorrect installation may result in overheating and battery case rupture Warning Do not attempt to disassemble or incinerate any bat tery Keep all batteries away from children Dispose of used batteries promptly and as regulated by the laws in your area Note Check with any retailer of household type batteries in your area for battery disposal informa tion Disposal Notice Should this product become damaged beyond repair or for some reason its useful life is considered to be at an end please observe all local state and federal regula tions that relate to the disposal of products that contain lead batteries plastics etc If your dealer is unable to assist you please contact Steinberg Yamaha directly NAME PLATE LOCATION The name plate is located on the bottom of the product The m
61. umentation upon receipt provided that the software is employed in accordance with the minimum requirements for the operating system and the computer hardware Insignificant divergences from the functions described in the documentation do not give rise to any warranty claim Other documents and statements are unremarkable for the composition of the product 11 2 2 f the user is consumer within the EU the statutory war ranty Gew hrleistung to defects of the product shall apply If the user is a businessman Steinberg provides warranty for defects of the product at its discretion by fur her fulfillment improvement or substitute delivery within one year However there exists no warranty for Trial Ver sion Software 11 3 Limited Warranty outside the EU In the event that you as a irst buyer of the software are located outside the EU the ollowing limitation of liability shall apply 11 3 1 Steinberg ensures gew hrleistet to the person who acquires first time the license for the use of the software according to this Agreement for the duration of ninety 90 days as of receipt of the software that the software exe cutes essentially the functions described in the enclosed documentation at receipt provided that the software is employed according to the minimum requirements for the Operating system and the computer hardware Insignifi cant differences of the functions described in the docu mentation do not j
62. ustify any warranty claim Other documents and statements are insignificant in terms of the quality of the product 11 3 2 If the software does not essentially fulfill the functions described in the documentation your only warranty claim against Steinberg and Steinberg s only obligation consists in an exchange of the software or a refund of the selling price at the discretion of Steinberg 11 3 3 Further warranty obligations according to the laws of your country remain unaffected However there exists no war ranty for Trial Version Software 12 Limitation of Liability 12 1 The limitation of liability for you as first buyer of the soft ware located within the EU is specified in Subsection 12 2 and the limitation of liability for you as first buyer of the software located outside the EU is specified in Subsection 12 3 of this Agreement 12 2 Limitation of Liability within the EU In the event that you as a first buyer of the software are located within the EU the following limitation of liability shall apply 12 2 1 Irrespective of the legal grounds Steinberg shall only be liable to compensate or replace futile expenses in accor dance with the following stipulations 12 2 2 Steinberg shall be liable for damages caused by the intentional or grossly negligent conduct of Steinberg its legal representatives managerial employees or any other vicarious agents and damages arising from death bodily damage and damage to he
63. you during a reg istration Further the activation codes must be entered manually by the user upon installation and the license information must be exchanged with the server of SIA Syncrosoft The reinstallation of the software on the same or another computer is permitted only in case the already installed software cannot be used any more e g following deinstal lation Ifthe software does not use a Steinberg key but requires activation codes the new activation codes may be obtained from the user s online account for support created during the personal product registration Further the activation codes must be entered manually by the user upon installation and the license information must be exchanged with the server of SIA Syncrosoft Steinberg CG121 Operation Manual 25 may require for the provision of further activation codes e g your proof of purchase invoice receipt and a signed assurance by fax or letter stating your name address and that the already installed software cannot be used any more Trial Version Software can be used on a computer also at reinstallation only altogether 30 days 5 5 You can also use another computer other than the one on which the software is to be installed for the activation and transfer of license data to the Steinberg key if the software is using a Steinberg key However in such a case a corre sponding access software Syncrosoft License Control Center LCC must be installed

Steinberg CC121

Contents

Download Pdf Manuals

Related Search

Related Contents