Hikvision Digital Technology DS-2AF7268N-A surveillance camera
Contents
1. 34 3 6 2 Configuring Dome Authentication 35 3 6 3 Restoring Default Dome Settings cccccecccccessssssseceeececsesseaececececeesesaeeeeeeeceseeseeseseeecessesnsaeseeeesseeseeaeseeeesseeee 35 3 6 4 Restoring Default Camera Settings ccccccccccccsessssssecececseseassesececeesesessesececeesesesseseesceseeseeaeseeeesseeseaaeseseeeceeee 36 3 6 5 REDOOTING THE DOMME EEE Ea 36 Hikvision User Manual of IR Speed Dome Chapter 1 Overview 1 1 Description Integrated with the built in pan tilt unit the high speed dome features highly sensitive response and reliable performance The speed dome can be adopted in various surveillance fields with its full integral functions and features such as forest railway airport harbor oil field plaza park scenic spot street train station stadium etc 1 2 Functions OSD On Screen Display The on screen display is an image superimposed on a screen picture used for displaying information and menu Self adaptive Protocol The speed dome is compatible with PELCO D PELCO P PRIVATE Code VICON and KALATEL 32 protocol etc and is capable of being self adaptive to these protocols without selecting protocol by DIP switch settings Keyboard Control The pan tilt movement and zoom actions of dome can be controlled by the control keyboard DVR matrix etc2. Es LANGUAGE _ SETTINS CAMERA gt pee TN ADDRESS PARAMETER FOCUS SET TITLE _ MOT N com FORMAT 200M LIMIT Goma C CER oomareen C ater SLOW VERSION PATROLS PARK TIME C RED HARDVERSION TIME TASK FILTER BLUE lt lt SHARPNESS rocus _PRivacys IMAGE 2 FREEZE p BLC WDR INIT LENS N ALARMS pome SPEED Preser PEED N j we LIMIT Canned stor D CHROMA gt SUPPRESS lt SETTING TT SHUTTER 5 ATURATION CLEAR STOPS ELEVATION EXPOSURE s E CD a HRMODE Hikvision User Manual of IR Speed Dome Before you start You can operate the speed dome using the on screen display menu remotely by connecting to a DVR or an encoder Examples of entering speed dome menu are listed as follows Enter the menu by pressing buttons PTZ gt gt 9 gt 5 on the front panel of the DVR Enter the menu by pressing buttons CALL gt 9 gt 5 gt ENTER on the keyboard Enter the menu via the IE browser of a DVR encoder Menu operations via the IE browser of a DVR will be taken as an example in this chapter
3. Task 2 Preview the patrol Move the cursor to PREVIEW and click IRIS to preview the current patrol and enable the speed dome to scan among the presets Task 3 Delete a patrol You can move the cursor to CLEAR PATH and click IRIS to delete the current patrol Task 4 Call the defined patrol You can select the corresponding preset number from the drop down preset list in the control panel of the DVR through a web browser and click the arrow to call the related patrol E g call preset 35 to call patrol 1 Please refer to Section 2 3 to find the corresponding preset number for each patrol Task 4 Configuring the shortcut patrol Calling the system defined preset 46 can enable the shortcut patrol The patrol starts from the number 1 preset to number 32 preset by default You can set the duration time in a preset scene by adjusting PATROL D TIME The value can be 5 10 20 30 and 60s mo Hikvision User Manual of IR Speed Dome 3 4 4 Configuring Patterns Purpose A pattern is a memorized repeatable series of panning tilting zooming and preset movements that can be recalled by a command or automatically performed by a configured function alarm park time task and power up PATTERNS PATTERN NUM EDIT PATTERN PREVIEW CLEAR PATTERN REMAINING BACK EXIT Figure 3 19 Pattern Configuration Menu Task 1 Set a pattern Steps 1 Move the cursor to enter the PATTERNS submenu MAIN MENUS gt DOME SETTINGS gt PATTE
4. 3 1 Accessing and Operating the Menu To enter the main menu Steps 1 Connect the video and RS 485 cables of speed dome to a DVR 2 Visit the DVR with the IE browser 3 View the live video of the speed dome 4 Call preset 95 from the preset list in the PTZ control panel of the DVR MAIN MENUS lt SYS INFO gt lt DOME SETTINGS gt lt RSTORE DEFAULTS gt lt RSTORE CAMERA gt lt RSBOOT DOME gt LANGUAGE ENGLISH SET TITLE OFF EXIT Figure 3 1 Main Menu To move the cursor and operate the menu Move the cursor up down On control panel of the live view interface of the DVR click up and down direction buttons or FOCUS and FOCUS buttons to move the cursor in the menu up and down Enter Exit On control panel of the live view interface of the DVR click IRIS to enter a submenu move the cursor to BACK in the menu and click IRIS to return to the previous menu move the cursor to EXIT in the menu and click IRIS to exit the main menu Page up page down There is no RETURN or NEXT menu items for turning page up or down On control panel of the live view interface of the DVR you can click left and right direction buttons to turn page up or down To change the value of a parameter Steps mo Hikvision User Manual of IR Speed Dome 1 Move the cursor to the target item and click IRIS button and you can see the cursor diamond mark will change to be totally hollow 2 Click the up down or le
5. Limit Stops The dome can be programmed to move within the limit stops left right up down which are configurable by the control keyboard DVR or client application software Scan Mode The dome provides 5 scan modes pan scan tilt scan frame scan random scan and panorama scan The scan speed can be set by OSD menu from level 1 to 40 with the corresponding speed ranging from 17 second to 40 Preset Freeze Frame This feature freezes the scene on the monitor when going to a preset This allows for smooth transition from one preset scene to another and also guarantees that masked area will not be revealed when going to a preset Presets Each of the user definable presets can be programmed to use pan tilt camera settings and other settings When preset is called the dome will automatically move to the defined position User is allowed to add modify delete and call each preset Label Display The on screen label of the preset title azimuth elevation zoom and other operations can be programmed by menu and displayed on the monitor Auto Flip mo Hikvision User Manual of IR Speed Dome In manual tracking mode when a target object goes directly beneath the dome the dome will automatically rotate 180 degrees in horizontal direction to maintain continuity of tracking Privacy Mask The privacy mask allows a user to program user defined areas that cannot be viewed by the operator of the dome system A masked area will m
6. Configuring Patrols For Manchester code control protocol the system defined presets with special functions are shown as below mo Hikvision User Manual of IR Speed Dome Table 2 3 System defined Presets of Manchester Code Control Protocol Function Function Auto flip Call Pattern 1 Call Pattern 2 Call Pattern 3 Remote reboot Access main menu Stop programming pattern Set Pattern 1 Set Pattern 2 Set Pattern 3 2 4 On Screen Displays The speed dome supports following on screen displays Zoom Identifies the amount of magnification The format is ZXXX XXX is the zoom amount Direction Displays panning and tilting direction with the format of NEXXX TXXX The XXX following NE indicates the degrees in north east direction while the XXX following T indicates the degrees in tilt position Time Display the current time Preset Title Display the preset being called mo Hikvision User Manual of IR Speed Dome Chapter 3 Menu Operation The OSD menu tree is shown in the following figure Note The menu varies depending on the model of speed dome MAIN MENUS DOME RESTORE RESTORE SNe SETTINGS DEFAULTS SOT
7. ON 3 Click IRIS again to confirm and exit edit mode of this column 4 Configure the task action Steps 1 Move the cursor to TASK ACTION and click the IRIS to enter edit mode 2 Click the up and down direction buttons to select the task action from preset 1 to 8 pattern 1 to 4 patrol 1 to 8 panning scan tilting scan random scan frame scan panoramic scan day mode night mode and none 3 Click IRIS again to confirm and exit edit mode of this column 5 Set the task time Steps 1 Move the cursor to TASK TIME and click IRIS to enter edit mode 2 Click the left and right direction buttons to position the cursor to WEEK START H M and END H M 3 Click the up and down direction buttons to select the specific day and time 4 Click IRIS to confirm and exit Note The weekday can be set to be from Monday to Sunday or Whole Week WEEK WHOLE WEEK START H M 00 00 END H M 00 00 DONE OPEN QUIT CLOSE Figure 3 22 Set the Task Time mo Hikvision User Manual of IR Speed Dome Task 2 Preview the task Move the cursor to TASK PREVIEW and click IRIS to view the time action and status of the scheduled task TIME ACTION STATE NONE NONE NONE NONE NONE NONE NONE NONE 00 00 00 00 00 00 00 00 oooococoo OFF OFF OFF OFF OFF OFF OFF OFF Figure 3 23 Preview the Time Task Task 3 Delete the task Move the cursor to CLEAN TASK and click IRIS to delete t
8. additional costs mo Hikvision User Manual of IR Speed Dome Table of Contents Chapter 1 E EEE R 1 1 1 1 1 2 BUI CELOMS 1 Chapter 2 Getting Started 5 2 1 Power Up ACEIOMN 5 2 2 2 5 2 3 SYStEM CETINER PRESETS EA EEE 6 2 4 On Screen DIS Plays a 7 Chapter 3 Menu Operation icevecccciecicedieevecteceecicectecdeccaveececcdecesvecsecesceesveedvecsccedeceddees ecueeevdeesdeed eesteeveeeddee eeesdeevieeses 8 3 1 Accessing and Operating the cccccccecsssssssecccecsesesssecececsesesassesececeesesaesesececeeseaesseseesceesesasaesecsesesesesaeseeees 9 3 2 Configuring System Information 10 3 2 1 Checking System MTOFMAtiON 10 3 2 2 Configuring System Parameters ccccccscccccecsesseaeceecceceesesaeeecececeesesaeeeeeeeceseeseeaeseeeceseesnseeseeeesceeseeaeaeeeeseeene 10 3 3 Configuring Image Parameters cccsscccccecsssssssesececeesesesaeseccceeseasesecececseseeeesecececeesesaesesececeeeasaeseeseseseaaeaeseeecs 13 3 3 1 Configuri
9. click the calling button to view the desired image position TASK 1 Set a preset Steps 1 Move the cursor to enter preset configuration submenu MAIN MENUS gt DOME SETTINGS gt PRESETS PRESETS PRESET NUM UNDEFINED lt EDIT LABEL gt PRESET PTZ CLEAR PRESET BACK EXIT Figure 3 14 Preset Configuration Menu 2 Choose the preset number Move the cursor to PRESET NUM and click IRIS to enter Click the up and down buttons to choose the preset number which needs to be edited If the preset has been defined the preset label will be listed under the number if it has not been defined you will see UNDEFINED under the number Notes There are up to 254 presets be set for the speed dome The system defined presets will be displayed on this submenu and they are not editable 3 Edit the label of the preset Hikvision User Manual of IR Speed Dome PRESET 1 ZOOM DELETE CONTENTS FOCUS CHANGE CONTENTS FOCUS CHANGE MARKER ROCKER CHOOSE CONTENTS OPEN SURE CLOSE BACK Figure 3 15 Edit the Preset Label 1 Steps 1 Move the cursor to EDIT LABLE and click IRIS to enter the edit mode 2 Click FOCUS in the PTZ control panel to switch between the character lists including capital alphabet lowercase alphabet symbols and numbers click the up down and left right direction buttons to move the cursor to choose a specific character to input 3 Click FOCUS to position the cursor on the l
10. duration of Power Off Memory as 30s 60s or 180s for power off memory 3 3 Configuring Image Parameters 3 3 1 Configuring Camera Parameters Purpose You can set the camera parameters including focus shutter speed iris etc Enter the camera parameters settings menu MAIN MENUS gt DOME SETTINGS gt CAMERA PARAMETER mo Hikvision User Manual of IR Speed Dome CAMERA CAMERA BLC WDR WHITE BALANCE AUTO BLC LEVEL RED AE MODE BLUE CAMERA FOCUS AF ZOOM LIMIT 36 ZOOM SPEED HIGH IRIS IMAGE FLIP SHUTTER FOCUS LIMIT GAIN INIT LENS EXPOSURE COMP NOISE REDUCE BACK EXIT BACK EXIT SLOW SHUTTER ON IRCUT FILTER AUTO D N LEVEL HIGH SHARPNESS 9 BACK EXIT Figure 3 6 Camera Settings Task 1 Configure the focus settings Setting the focus mode Steps 1 Move the cursor to FOCUS using the direction buttons and click IRIS to change the cursor to totally hollow 2 Click up down direction buttons to choose the focus mode as AF MF or HAF AF Auto focus The lens remains in focus during PTZ movements MF Manual Focus You need to adjust the focus with Focus and Focus buttons manually HAF Half auto Focus The speed dome focuses automatically only once after panning tilting and zooming 3 Click IRIS button to save the settings Setting the focus limit Purpose This function is used to limit the minimum focus distance You can configure the focus limit longer when the target is at a distance to avoid t
11. iris are in auto status during the preset is being memorized Power off Memory This feature allows the dome to resume its previous position or status after power is restored By default setting the dome supports the power off memory capability with the dwell time of 3 minutes Alarm Response Action The speed dome supports 2 alarm inputs which can be set to NO or NC Upon having received the alarm input signal the dome will automatically activate a user defined action which can be programmed to preset 1 8 pattern 1 4 patrol 1 8 pan scan tilt scan random scan frame scan panoramic scan color or B amp W mode After the alarm is cleared the dome is capable of resuming its previous activity or position AUX Output An auxiliary output is a configurable signal from the dome back box that can trigger another device to operate The dome provides one auxiliary output The auxiliary output type can be set to NO normally open or NC normally closed And the alarm dwell time is configurable as well Manchester Code Self test The speed dome supports Manchester code self test for fault diagnostic You can enable the Manchester code diagnosis function by setting the positions 4 5 and 6 of DIP Switch to ON The corresponding fault code will be displayed on the screen not available during park time while adopting Manchester protocol Table 1 1 Descriptions of the Fault Code Description Normal control Cable is disconnected Cable i
12. of the dome movements 1 DOME SPEED the manual movement speed can be set from 1 to 10 2 SCAN SPEED scan speed defines the scan degree per second of panning scan tilting scan frame scan random scan and panoramic scan Scan speed is adjustable from 1 to 40 degrees per second 3 PRESET SPEED the speed of calling a preset can be set from level 1 to 8 The higher level corresponds to the faster speed to call a preset Limit stops Purpose The dome can be programmed to move within the configurable limit stops left right up down Steps 1 Move the cursor to LIMIT STOPS and click IRIS to set it ON to enable this feature Click IRIS again to confirm 2 Move the cursor lt SETTING STOPS gt and click IRIS You will see the message SET LEFT LIMIT on the screen 3 Click the direction buttons in the PTZ panel to configure the left limit stop Click IRIS to confirm Follow the prompts to configure the right up and down limit stops on the menu mo Hikvision User Manual of IR Speed Dome Note The new limit stops will overwrite the existed ones by default 5 You can clear the defined limit stops Click IRIS to enter CLEAR STOPS and click IRIS again to clear the stops Elevation Set This function is for enabling or disabling the elevation angle in the tilt direction The elevation angle 15 59 3 4 2 Configuring Presets Purpose A preset is a predefined image position For the defined preset you can simply
13. 7 HIKVISION IR Speed Dome User Manual UD 6L0201D1359A01 User Manual of IR Speed Dome Thank you for purchasing our product If there is any question or request please do not hesitate to contact the dealer This manual is applicable to IR Speed Dome This manual may contain several technically inaccurate points or printing errors and the content is subject to change without notice The updates will be added into the new version of this manual We will readily improve or update the products or procedures described in the manual 1000001030802 0300001040123 mo Hikvision User Manual of IR Speed Dome Regulatory Information FCC Information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This devi
14. BAUD 2400 IR PARAMETER SYS INFO SETTINGS PROTOCOL STATUS SET OFF PROTOCOL SET AUTO MATCH 485CHECK SET AUTO MIN FOCUS DISTANCE N A POWER OFF MEMORY 305 WIPER SPEED LOW WIPER CONTROL SOFT BAUD ACTIVE OFF FAN CONTROL BROADCAST ADDRESS ON EIS FUNCTION PELCO CHECKSUM ON EIS LEVEL SYS TIME PRESET DFOCUS BACK EXIT BACK EXIT BACK EXIT Figure 3 3 System Information Settings Note You can click the left and right direction buttons in the PTZ control panel via the IE browser of the DVR for page up or page down if more than one page is available Descriptions of system parameter configuration Dome address settings Task 1 Set the soft address of the speed dome If the SOFT ADDR ACTIVE is set as ON the soft address is the valid address for connecting the speed dome The SOFT ADDRESS ranges from 1 to 255 If the SOFT ADDR ACTIVE is set as OFF the hard address set by the DIP switch is the valid address of the speed dome Task 2 Set the broadcast address of the speed dome When the BROADCAST ADDRESS is set to ON the control devices with address can control the speed dome remotely regardless of the address of the speed dome With this function on the control device with address 0 is capable of controlling all domes connected to it This function is usually for debugging Soft baudrate settings If the SOFT BAUD ACTIVE is set as ON the soft baudrate is the valid baudrate for the speed dome with 2400 4800 9600 and 19200
15. DOME and click IRIS to reboot the speed dome remotely mo Hikvision First Choice for Security Professionals www hikvision com
16. Parameter IR Sensitivity When the LED CONTROL mode is AUTO the IR LEDs are turned on or off according to the illumination of the scene The IR SENSITIVITY is higher the IR LEDs are turned on or off easier when the illumination changes The IR SENSITIVITY can be set to LOW MEDIUM or HIGH LED Current Configure the N M LED CURRENT and FAR LED CURRENT to adjust the brightness of NEAR MEDIUM and FAR LEDs The brightness value ranges from 1 to 10 LED Control mo Hikvision User Manual of IR Speed Dome Configure the LED CONTROL to set the LED control mode The LED control mode can be AUTO FAR far irradiation distance LEDs ON M F medium and far irradiation distance LEDs ON MID medium irradiation distance LEDs ON M N medium and near irradiation distance LEDs ON and OFF Fan parameter configuration You can set the FAN CONTROL as ON or OFF EIS Electronic Image Stabilization configuration You can set the EIS FUNCTION as ON or OFF and set the EIS LEVEL as 0 3 Note The selectable EIS levels vary depending on the camera models Preset direct focus You can set the preset direct focus function ON OF on PRESET DFOCUS submenu Protocol settings You can set the PROTOCOL STATUS SET as ON or OFF and set the PROTOCOL SET as AUTO MATCH PELCP P PELCO D Private code etc RS 485 checksum setting You can set the 485CHECK SET as ON or AUTO for improving the controlling effect Power Off Memory You can set the
17. RNS 2 Choose the pattern number Steps 1 Move the cursor to PATTERN NUM and click IRIS to enter edit mode 2 Click the up and down direction buttons to select the number of the pattern which is to be configured 3 Click IRIS again to confirm Note You can configure up to 4 patterns 3 Edit the pattern Steps 1 Move the cursor to EDIT PATTERN and click IRIS to enter edit mode REMAIN MEMORY 100 DONE OPEN QUIT CLOSE Figure 3 20 Edit the Pattern mo Hikvision User Manual of IR Speed Dome 2 Click the PTZ control buttons and direction buttons to pan tilt or zoom in out the speed dome to draw a movement path The speed dome can automatically memorize the path you operated as a pattern 3 Click IRIS again to save the pattern and exit edit mode Notes REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the patterns When it reaches 0 no more patterns can be configured You can also see the remaining memory shown under PATTERNS menu as REMAINING The panning tilting movements and the lens operations cannot be memorized simultaneously Task 2 Preview the pattern Enter the PREVIEW menu to preview the current pattern Task 3 Delete the patterns Delete a chosen pattern Click IRIS to enter EIDT PATTERN and you can see DEL PATH ABOVE Click IRIS to delete the pattern Note If you delete the current pattern the following pattern will also be deleted E g if pattern 2
18. abel where the character needs to be modified Click ZOOM IN to delete it 4 Click IRIS to select the character from the letter number symbol list to the label 5 Click FOCUS to exit the character lists and click IRIS again to confirm and exit the submenu LABEL PRESET INS LOWCASE a bc de f g hI jj ZOOM DELETE CONTENTS FOCUS CHANGE CONTENTS FOCUS CHANGE MARKER ROCKER CHOOSE CONTENTS OPEN SURE CLOSE BACK Figure 3 16 Edit the Preset Label 2 4 Set the preset position Move the cursor to PRESET PTZ and click IRIS to edit the preset position Use the direction buttons to move the speed dome to find the desired scene position and then press IRIS to confirm the settings and return to the previous menu or press IRIS to cancel Note The preset position settings will be restricted by the limit stops if they are defined TASK 2 Clear the preset settings Move the cursor to CLEAR PRESET and click IRIS to clear the settings of the current preset TASK 3 Call the presets You can select the preset number from the drop down preset list in the control panel of the DVR mo Hikvision User Manual of IR Speed Dome through a web browser and click the arrow to call a user defined preset 3 4 3 Configuring Patrols Purpose A patrol is a memorized series of preset function It can be set and previewed on the patrol settings interface Task 1 Set a patrol Steps 1 Move the cursor to enter patrol configuration sub
19. al of IR Speed Dome Purpose If you enable this function the pan tilt speeds change according to the amount of zoom When there is a large amount of zoom the pan tilt speed will be slower for keeping the image from moving too fast on the live view image You can set PROPORTIONAL PAN to ON or OFF to enable disable the function Note This function is enabled automatically while setting the patterns Park time and actions Purpose This feature allows the speed dome to start a predefined action park action scan preset pattern etc automatically after a period of inactivity park time You can set PARK TIME from 5 to 720 seconds and set the park action PARK ACT as preset 1 to 8 pattern 1 to 4 patrol 1 to 8 pan scan tilt scan random scan frame scan panoramic scan day mode night mode or none Note no control signal is received after the park time under the following circumstances no park actions will be performed in the process of performing dome actions by calling special presets or in the process of performing external alarm linked actions Image freeze This feature enables the live view to switch directly from one scene defined by a preset to another without showing the middle areas between these two to ensure the surveillance efficiency It can also reduce the use of bandwidth in a digital network system You can set IMAGE FREEZE on to enable this function PTZ speed Purpose You can define the speed
20. button to move the cursor to INPUT PW AGAIN and input the password again 5 Click IRIS to save the changes and exit 6 Enter the START USING submenu and switch the status to ON and click IRIS to save PASSWORD START USING INPUT PW 123456 EDIT PASSWORD INPUT PW AG 1 2345 6 DONE OPEN BACK EXIT QUIT CLOSE Figure 3 29 Set the Password 3 6 3 Restoring Default Dome Settings Purpose You can reset all dome settings to factory default parameters as shown in the table below Note Dome settings are mainly of PTZ parameters and alarm parameters and also include some system settings e g dome address Enter default dome settings menu MAIN MENUS gt RESTORE DEFAUTLS Click IRIS to restore the dome settings to the default value as shown in below table or click IRIS to exit Table 3 2 Default Dome Settings Hikvision User Manual of IR Speed Dome Default Value 0 2400bps Off Off Zero angle Off Semi auto Max Optical Zoom High Day Auto 7 Auto On On 5 seconds None Level 28 Off Off Display for 2 seconds 3 6 4 Restoring Default Camera Settings Enter MAIN MENUS gt RESTORE CAMERA Click IRIS to restore the camera settings to the default value or click IRIS to exit Note Camera settings include the image parameters lens settings and display settings 3 6 5 Rebooting the Dome Enter MAIN MENUS gt REBOOT
21. ccumulate more light when the light condition is low Thus the image can be brighter Backlight Compensation BLC If the speed dome focuses on an object against strong backlight the object will be too dark to be seen clearly The BLC function can compensate light to the object in the front to make it clear but this causes the over exposure of the background where the light is strong Wide Dynamic Range WDR The wide dynamic range function helps the speed dome provide clear images even under back light circumstances When there are both very bright and very dark areas simultaneously in the field of view WDR balances the brightness level of the whole image and provide clear images with details White Balance White balance is the white rendition function of the speed dome to adjust the color temperature according to the environment automatically It can remove the unrealistic color casts in the image Patrol The high speed dome provides up to 8 patrols In each patrol user is allowed to specify the scanning track by a group of user defined presets with the scanning speed between two presets and the dwell time at the preset separately programmable Pattern A pattern is a memorized repeating series of pan tilt zoom and preset functions that can be mo Hikvision User Manual of IR Speed Dome recalled with a command from a controller or automatically by a configured function alarm park time task or power up By default the focus and
22. ce may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement This product and if applicable the supplied accessories too are marked with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 2011 65 EU 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info mo Hikvision User Manual of IR Speed Dome Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss The precaut
23. d click IRIS to enter 2 Click up down direction buttons to choose the limit from 23 46 92 184 and 368 3 Click IRIS button to confirm Note The ZOOM LIMIT value varies depending on the model of the speed dome Setting the zoom speed Purpose You can define the zooming speed of the lens Steps 1 Move the cursor to ZOOM SPEED using the direction buttons and click IRIS to enter 2 Click up down direction buttons to choose the speed from HIGH MEDUIM and LOW 3 Click IRIS button to confirm mo Hikvision User Manual of IR Speed Dome Task 4 You can turn INIT LENS on to trigger a spontaneous lens initiation for ensuring the normal operation Task 5 Set the sharpness level The sharpness function can increase the gain of the image and sharpen the edges in the picture to enhance the picture details You can set the SHARPNESS level from 0 to 15 Task 6 Set the Day Night Mode There are two parameters available for day night mode configuration 1 IR cut filter It can be set as AUTO DAY or NIGHT 2 AUTO The speed dome is capable of automatically switching from Black and White mode NIGHT and Color mode DAY regarding to the lightening conditions It is the default value NIGHT B W You can switch the IR cut filter into NIGHT mode to increase the lens sensitivity in low light conditions DAY Color You can switch it to DAY mode in normal lighting conditions Note You can also call preset 39 to set
24. een call preset 11 twice within 5 seconds to enter the SET TITLE menu as shown in the following figure Figure 3 10 Set Dome Title 7 Click the left right direction buttons to position the cursor to the characters of the title 8 Get the codes for a specific character and enter each code number by calling the preset number i e calling presets 1 9 to enter number 1 9 respectively and calling preset 10 to enter number Note You can get the codes of a specific character using the software we provided For example if you want to display the word HALL as a part of the dome name please follow below steps Steps mo Hikvision User Manual of IR Speed Dome 1 Enter HALL in the Title filed of the software click OK and you ll see the corresponding codes 0227 0220 0231 0231 listed for it Title a 0227 0220 0231 0231 Figure 3 11 Get the Codes of a Character 2 On the SET TITLE menu call the presets standing for each code in sequence to enter the codes E g call preset 10 to get 0 and call preset 2 to get 2 The corresponding numbers characters and position information will be displayed on the screen when you are calling the presets 3 You can call preset 16 to delete the character at the current position Note You can set up to 15 characters for the dome title 9 Exit the title setting menu and display the dome title You can call preset 12 twice within 5 seconds to exit the title setting menu and display the
25. en and CLOSE normally closed Note there are 2 auxiliary outputs configurable 3 Move the cursor to DWELL TIME to set the duration of the auxiliary output signal The configurable rage 15 0 60 seconds 4 Link the auxiliary output to the configured alarm Steps 1 Enter MAIN MENUS gt DOME SETTINGS gt ALARMS gt ALARM SETTING and choose the alarm number that you want to link the auxiliary output to 2 Move the cursor to AUX and click IRIS to configure the auxiliary output the alarm You can choose NONE to disable auxiliary alarm outputs choose 1 to active AUX 1 or choose 2 to active AUX 2 3 6 Others 3 6 1 Setting the language of the menu Enter MAIN MENUS gt LANGUAGE you can set the language of the on screen display menu in mo Hikvision User Manual of IR Speed Dome Chinese or in English 3 6 2 Configuring Dome Authentication Purpose You can change and enable disable the password to set the dome authentication to prevent unauthorized changes to the dome settings After you set and enable the password you need to input the password every time you call preset 95 to enter the menu Steps 1 Move the cursor to enter password modification submenu MAIN MENUS gt DOME SETTINGS gt PASSWORD gt EDIT PASSWORD 2 Click IRIS to enter edit mode 3 Click the left right buttons to move the cursor on the current password and click up down or FOCUS buttons to choose the number 4 Click the right direction
26. ft right buttons in the PTZ control panel to choose the value from the selectable value list 3 Press IRIS to confirm the change or click IRIS to cancel and restore the original value The diamond mark will change back to be stuffed or half stuffed 3 2 Configuring System Information 3 2 1 Checking System Information Purpose System information menu displays the current system information of the speed dome as shown in Figure 3 2 including model address protocol etc The information shown on this submenu is similar to the system information shown after the power up action Please refer to Section 2 1 for more details Enter the system information display menu MAIN MENUS gt SYS INFO SYS INFO TYPE DS 0XX0 000X ADDRESS 0 COM FORMAT 0000 0 0 PROTOCOL XXXXK TEMPERATURE 27C VERSION 0 00 BUILD DATE 12 08 09 BACK EXIT Figure 3 2 System Information Notes Information in this interface cannot be edited The temperature refers to the internal temperature of the speed dome 3 2 2 Configuring System Parameters Purpose You can check and also edit the system information of software address baudrate system time etc on the system information settings menu Enter the system information settings menu Hikvision User Manual of IR Speed Dome MAIN MENUS gt DOME SETTINGS gt SYS INFO SETTINGS SYS INFO SETTINGS SYS INFO SETTINGS SOFT ADDRESS 1 ZERO ANGLE SOFT ADDR ACTIVE OFF DISPLAY SETTINGS SOFT
27. gnostics 3 5 Configuring and Handling Alarms 3 5 1 Configuring Alarm Input and Linked Actions Purpose This section explains how to configure the speed dome to respond to alarm events with alarm linked actions such as calling presets patrols patterns scanning etc Steps 1 Move the cursor to enter the alarm configuration submenu MAIN MENUS gt DOME SETTINGS gt ALARMS gt ALARM SETTING ALARMS ALARM SETTING ALARM RESUME ALARM NUM 1 ALARM SEQUENCE 5 PRIORITY HIGH ALARM REST DELAY 5 ALARM ACT NONE ALARM SETTING AUX NONE ALARM INPUT OPEN BACK EXIT BACK EXIT Figure 3 27 Alarm Configuration Menu 2 Choose the alarm number Steps 1 Move the cursor to ALARM NUM and click the IRIS to enter edit mode 2 Click the up and down direction buttons to select the number of the alarm which is to be configured mo Hikvision User Manual of IR Speed Dome 3 Click IRIS again to confirm and exit edit mode of this column Note You can configure up to 7 alarms 3 Configure the alarm input Steps 1 Move the cursor to ALARM INPUT and click the IRIS to enter edit mode 2 Click the up and down direction buttons to set the input status You can configure it as OPEN Normally open CLOSE Normally closed or OFF disable the alarm input 3 Click IRIS again to confirm Note If you set the status as OPEN alarm will be triggered by high electricity level if you set the status as CLOSE alarm will be triggered by low e
28. he speed dome focusing on the objects close to it or configure the focus limit shorter when the target is near the speed dome and avoid it focusing on the objects father You can set FOCUS LIMT as 1CM 30CM 1M 3M or AUTO Note The focus limit value varies depending on the models of speed dome Task 2 Configure the iris gain and shutter speed Setting the AE mode Purpose AE mode defines the priority of iris shutter and gain when the speed dome adjusts the brightness of the video The options in AE MODE are as follows AUTO Auto iris auto shutter and auto gain The speed dome adjusts these values automatically responding to the lighting conditions It is the default mode HAUTO You can adjust the video brightness with IRIS and IRIS buttons when you select this mode IRIS It is the iris priority mode You need to adjust the iris value manually The shutter and gain values will be adjusted automatically according to the lighting conditions Please define the iris value according to related content in this section after you choose IRIS mo Hikvision User Manual of IR Speed Dome mode SHUTTER It is the shutter priority mode You need to adjust the shutter value manually The iris and gain values will be adjusted automatically according to the lighting conditions Please define the shutter speed value according to related content in this section after you choose SHUTTER mode MANUAL You need to adjust the shutter iris and ga
29. he time and action of the current task 3 4 6 Configuring Zones Purpose ZONE submenu is used to divide the scene into several parts with user defined labels displayed on the screen You can also set the speed dome to scan in a zone automatically after a period of inactivity Task 1 Set a zone Steps 1 Move the cursor to enter the zone configuration submenu MAIN MENUS gt DOME SETTINGS gt ZONES ZONES ZONE NUM UNDEFINED EDIT LABEL EDIT ZONE ZONE STATUS SCAN STATUS CLEAR ZONE BACK Figure 3 24 Zone Configuration 2 Choose the zone number Move the cursor to ZONE NUM and click IRIS button to enter Click the up and down buttons to Hikvision User Manual of IR Speed Dome choose the zone number to be configured Note You can configure up to 8 zones 3 Edit the label of the zone Please refer to Step 3 Edit the label of the preset in Section 3 4 2 4 Configure the zone area Steps 1 Move the cursor and click IRIS button to enter EDIT ZONE submenu 2 You can see SET LEFT LIMIT on the screen Click the direction buttons to set the left limit stop 3 Follow the prompts on the screen to set the right limit up limit and down limit 4 Click IRIS button to save the settings and exit 5 Set the zone status and scan status SCAN STATUS enable disable the scanning in the zone Note ZONE STATUS is not editable After you edited the zone it will switch to ON automatically if you delete t
30. he zone the ZONE STATUS will switch to OFF Task 2 Clear the zone settings Move the cursor to CLEAR ZONE and click IRIS to clear all the settings of the current zone 3 4 7 Clearing PTZ Control Settings Purpose You can clear all user defined PTZ control settings including presets patrols patterns zones and time tasks You can also clear privacy masks on this menu Steps 1 Enter the CLEAR SETTINGS menu MAIN MENUS gt DOME SETTINGS gt CLEAR SETTINGS CLEAR SETTINGS CLEAR ALL PRESETS CLEAR ALL PATROLS CLEAR ALL PATTERNS CLEAR ALL BLANKS CLEAR ALL ZONES CLEAR ALL TIME TASKS lt DIAGNOSTICS gt BACK EXIT Figure 3 25 Clear Dome Settings 2 Click IRIS on each submenu e g CLEAR ALL PATTERNS Click IRIS again to confirm and exit On DIAGNOSTICS submenu you can also see the self diagnostics information of the speed dome including the occurrence of high temperature the highest temperature the occurrence of low mo Hikvision User Manual of IR Speed Dome temperature the lowest temperature the occurrences of video loss low voltage dome reboot panning loss tilting loss and communication loss Note Panning loss and tilting loss refer to the failures of panning and tilting for diagnosing the electric motor of the speed dome DIAGNOSTICS DIAGNOSTICS HIGH TEMP PAN LOST HIGHEST TEMP TILT LOST LOW TEMP CAMERA LOST LOWEST TEMP VIDEO LOSS LOW VOLATE POWER UP BACK EXIT BACK EXIT Figure 3 26 Self dia
31. in values manually when you select this mode Please define the iris gain and shutter speed according to related content in this section if you choose MANUAL mode Setting the iris value Purpose To adjust the iris size for light entering the lens you can set IRIS value manually according to light conditions The iris value ranges from 17 Note Iris is fully closed at value 0 and fully open at value 17 Setting the gain The value of gain indicates the amplification degree of the original light signal You can set the value from 0 to 15 Setting the shutter speed Purpose The speed of the electronic shutter controls the amount of light entering the lens in a unit of time a second You can manually configure the shutter speed for the speed dome and you can also enable the slow shutter function for low lighting circumstances 1 Shutter speed If you set the SHUTTER value bigger shutter speed is faster the amount of entering light per second is fewer and the image is darker You can set it as 1 2 4 8 15 30 50 125 180 250 500 1000 2000 4000 or 10000 Note The value of X indicates that the shutter speed is 1 X second 2 Slow shutter You can set the SLOW SHUTTER value as 0 1 2 3 4 5 Task 3 Configure the zoom settings Setting the zoom limit Purpose Zoom limit is a user defined limitation of the zoom amount Steps 1 Move the cursor to ZOOM LIMIT using the direction buttons an
32. ion measure is divided into Warnings and Cautions Warnings Neglecting any of the warnings may cause serious injury or death Cautions Neglecting any of the cautions may cause injury or equipment damage A A Warnings Cautions Follow these safeguards to prevent Follow these precautions to serious injury or death prevent potential injury material damage A Warnings All the electronic operation should be strictly compliance with the electrical safety regulations fire prevention regulations and other related regulations in your local region Please use the power adapter which is provided by normal company The power consumption cannot be less than the required value Do not connect several devices to one power adapter as adapter overload may cause over heat or fire hazard Please make sure that the power has been disconnected before you wire install or dismantle the speed dome When the product is installed on wall or ceiling the device shall be firmly fixed smoke odors or noise rise from the device turn off the power at once and unplug the power cable and then please contact the service center the product does not work properly please contact your dealer the nearest service center Never attempt to disassemble the speed dome yourself We shall not assume any responsibility for problems caused by unauthorized repair or maintenance Do not drop the dome or subject it t
33. is deleted pattern 3 and pattern 4 will be deleted as well Clear all the patterns Enter CLEAR PATTERN menu and click IRIS to delete all the defined patterns Task 4 Call the defined pattern You can select the corresponding preset number from the drop down preset list in the control panel of the DVR through a web browser and click the arrow to call the related pattern E g call preset 41 to call pattern 1 Please refer to Section 2 3 to find the corresponding preset number for each pattern 3 4 5 Configuring Time Tasks Purpose A time task is a scheduled dome action which can be configured to perform automatically at the specific time Task 1 Set time tasks Steps 1 Move the cursor to enter the TIME TASK submenu MAIN MENUS gt DOME SETTINGS gt TIME TASK 2 Choose the task number Steps 1 Move the cursor to TASK NUM and click IRIS to enter edit mode 2 Click the up and down direction buttons to select the number of the task which is to be configured mo Hikvision User Manual of IR Speed Dome 3 Click IRIS again to confirm and exit edit mode of this column Note You can configure up to 8 tasks TIME TASK TASK NUM TASK STATE TASK ACTION TASK TIME TASK PREVIEW TASK CLEAR BACK EXIT Figure 3 21 Time Task Configuration Menu 3 Set the task status Steps 1 Move the cursor to TASK STATE and click IRIS to enter edit mode 2 Click the up and down direction buttons to set the task status to
34. lectricity level if you set the status as OFF it will be triggered when this input channel is shut off 4 Configure the alarm linkage action You can specify the linked action when an alarm occurs On the ALARM ACT submenu you can set the alarm action as preset from 1 to 8 pattern from 1 to 4 patrol from 1 to 8 panning scan tilting scan random scan frame scan panoramic scan day mode night mode or none You can also set the alarm output for the alarm Please refer to Section 3 5 3 Configuring Auxiliary Alarm Output for details 5 Configure alarm priority Enter the PRIORITY menu and set the alarm priority as HIGH MID or LOW If multiple alarms with different priorities are triggered at the same time the dome only responds to the alarm with the highest priority If multiple alarms with the same priority are triggered at the same time then the dome will respond to each alarm according to the defined alarm sequence 3 5 2 Configuring Alarm Parameters Purpose You can set the alarm related parameters following below instructions including linkage action interval alarm duration and dome activity resumption Steps 1 Enter the alarm parameter configuration menu MAIN MENUS gt DOME SETTINGS gt ALARMS gt ALARM SETTING 2 Configure the interval of the alarm sequence When more than one alarm of the same priority occurs at the same time the speed dome will respond to one alarm first and then respond to the next one after the u
35. menu MAIN MENUS gt DOME SETTINGS gt PATROLS 2 Choose the patrol number Steps 1 Move the cursor to PATROLS NUM and click IRIS to enter edit mode 2 Click the up and down direction buttons to select the number of the patrol which is to be configured 3 Click IRIS again to confirm and exit edit mode of this column Note You can configure up to 8 patrols PATROLS PATROL NUM EDIT PATROL PREVIEW CLEAR PATH PATROL D TIME BACK EXIT Figure 3 17 Patrol Configuration Menu 3 Edit the patrol Steps 1 Move the cursor to EDIT PATROL and click IRIS to enter edit mode mo Hikvision User Manual of IR Speed Dome NUM PRESET DWELL SPEED 6 30 30 30 30 30 30 0 30 DONE OPEN QUIT CLOSE Figure 3 18 Edit the Patrol 2 Click up down direction buttons to position the preset to be edited 3 Click left right direction buttons to position the cursor to PRESET DWELL TIME and SPEED of a preset Click the up and down direction buttons to set each value Note The presets you set for a patrol should be the defined presets dwell time 0 30 seconds selectable is the time that the speed dome pauses on the certain preset speed is the patrol speed the dome switching between the presets 4 Follow above steps to define other presets for the selected patrol You can configure up to 32 presets in sequence for a patrol Press IRIS to save the current settings or press IRIS to cancel and return to the previous menu
36. nction on the image will be flipped It is like the image in the mirror Gain limit You can set this function to limit the gain value The GAIN LIMIT value ranges from 0 to 15 3 3 2 Configuring Privacy Mask Purpose Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the mo Hikvision User Manual of IR Speed Dome surveillance area from being live viewed and recorded The masked areas can move with the panning tilting movements and automatically adjust the size as the lens zooming in out Steps 1 Move the cursor to enter the privacy mask configuration submenu MAIN MENUS gt DOME SETTINGS gt PRIVACYS PRIVACYS BLANK NUM BLANK STATUS SET BLANK CLEAR BLANK BACK EXIT Figure 3 8 Privacy Mask Configuration Menu 2 Choose the privacy mask number Steps 1 Move the cursor to BLANK NUM and click IRIS to enter the editing mode 2 Click the up and down direction buttons to select a mask number for configuration 3 Click IRIS again to confirm and exit the editing mode Note The configurable privacy mask numbers vary depending on the camera models 3 Configure the position and size of the privacy mask Steps 1 Move the cursor to SET BLANK and click IRIS button to enter the editing mode as shown in the following figure You can see a privacy mask on the live window ADJUST BLANK POS FOCUS SHIFT STATUS SAVE OPEN QUIT CLOSE Figure 3 9 Set the Privacy Mask 2 Y
37. ng Camera Parameters 13 3 3 2 Configuring Privacy MaSK 17 3 33 Configuring OSD SEINES vcs neccadeandcs ccsonceeocsdeucescenvcestcanddeavecenstasceadwasesnuacededhasddeskaus E A EEE Eer E E 19 3 4 Configuring PTZ Control Parameters cccccceesssscccceceesesssaesececeeseeaaesecececseseaeeseeececeesaaesesececeesesasaeseesceeseeaeaeseeees 21 3 4 1 Configuring PTZ ParamMe tens 21 34 2 Configuring PRESETS 23 30 3 52 25 3 4 4 Configuring Patterns 27 3 4 5 Configuring Time Tasks 28 3 4 6 CONTISUPING ZOMES 30 3 4 7 Clearing PTZ Control 85 e e i EE 31 3 5 Configuring and Handling Alarms 32 3 5 1 Configuring Alarm Input and Linked 5 32 355 2 Contisuring Alarmi Parameters 33 3 5 3 Configuring Auxiliary Alarm 34 3 6 OEMS 34 3 6 1 Setting the language of the
38. o physical shock and do not expose to high electromagnetism radiation Avoid the equipment installation on vibrations surface or places subject to shock ignorance can cause equipment damage Do not place the dome in extremely hot cold dusty or damp locations otherwise fire or electrical shock will occur Please refer to the specification manual of the speed dome for detailed operating temperature The dome cover for indoor use shall be kept from rain and moisture Exposing the equipment to direct sun light low ventilation or heat source such as heater or radiator is forbidden ignorance can cause fire danger Do not aim the speed dome at the sun or extra bright places A blooming or smear may occur mo Hikvision User Manual of IR Speed Dome otherwise which is not a malfunction however and affecting the endurance of sensor at the same time Please use the provided glove when open up the dome cover avoid direct contact with the dome cover because the acidic sweat of the fingers may erode the surface coating of the dome cover Please use a soft and dry cloth when clean inside and outside surfaces of the dome cover do not use alkaline detergents Please keep all wrappers after unpack them for future use In case of any failure occurred you need to return the speed dome to the factory with the original wrapper Transportation without the original wrapper may result in damage on the speed dome and lead to
39. ou can see ADJUST BLANK POS message on the screen Click the direction buttons to adjust the position of the privacy mask to the designed scene 3 Click FOCUS button and you can see ADJUST BLANK SIZE message on the screen Click the up down buttons to increase decrease the height of the mask and click right left buttons to increase decrease the width of the mask Click IRIS button to save the settings and return to the previous menu and you can see the mask turn to gray mo Hikvision User Manual of IR Speed Dome 4 To modify the configured mask click IRISt button to enter the SET BLANK menu and click IRIS button again to modify Note The tilt range for configuring the privacy masks is from 0 to 70 Enable or disable the privacy mask function Enter the BLANK STATUS submenu and click the up and down direction buttons to set it ON or OFF Note If no privacy mask has been configured you cannot set the status as ON Delete the privacy mask You can enter the CLEAR BLANK menu to delete the current privacy mask 3 3 3 Configuring OSD Settings Purpose You can configure the on screen display of the dome name PTZ control information viewing direction etc Display the dome title Steps 1 Enter the dome title setting menu MAIN MENUS gt SET TITLE 2 Click IRIS to enter the editing mode 3 Click FOCUS to set it to ON 4 Click IRIS again to confirm 5 Exit the MAIN MENUS interface 6 On the live view scr
40. ove with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide 3D Intelligent Positioning The speed dome can be controlled with the 2 buttons and scroll of mouse can be used under PRIVATE Code protocols with devices and client software Click on a certain area and the device will move to the scene with corresponding point as the center When a rectangular area is selected by left clicking the mouse device will move to its center and enlarge it With right clicking the lens will zoom in and the scroll can easily make the lens zooming and mouse operation automatically incorporates zooming effect Proportional Pan Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom At telephoto zoom settings the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings This keeps the image from moving too fast on the monitor when there is a large amount of zoom Auto Focus The auto focus enables the camera to focus automatically to maintain clear video images DAY NIGHT Auto switch The speed dome delivers color images during the day as light diminishes at night it switches to night mode and delivers black and white images with high quality You can also switch it to NIGHT mode manually to increase the sensitivity in low light conditions Slow Shutter Slow shutter is the function of extending the exposure time to a
41. peed Dome Chapter 2 Getting Started 2 1 Power up Action After the power is applied the speed dome will perform a series of self test actions It performs lens actions firstly then the panning movement and the tilting movement at last After the power up self test actions the system information will be displayed for 2 minutes on the live view screen as shown below TYPE DS 2XX1 XXX SN 000000000 ADDRESS 0 COM FORMAT 2400 8 1 PROTOCOL ADAPTIVE VERSION 0 00 HARDVERSION 0 00 BUILD DATE 13 09 27 Figure 2 1 System Information Table 2 1 Descriptions of the System Information Description The model of the speed dome The serial number of the speed dome The default communication address of the speed dome The communication settings of the speed dome Baudrate 4 digits data bit 1 digit and stop bit 1 digit It is for communicating with other devices The version of the firmware The date when the program of the software is compiled Note Please make sure that the baudrate protocol and address have been configured to the same as those of the speed dome in the remote configuration interface of the control device Please refer to Table 2 1 for details of the configuration 2 2 Basic Operations You can operate the speed dome using a control device The control devices include the control mo Hikvision User Manual of IR Speed Dome keyboards DVRs encoder etc In thi
42. s and the following chapters operation of the speed dome by the IE browser of a DVR will be taken as an example Panning and tilting Click the direction buttons to control the movement of the speed dome Zooming Click the ZOOM and ZOOM buttons to control the zooming Focusing Click the FOCUS and FOCUS buttons to adjust the focus Iris Click the IRIS and IRIS buttons to adjust the iris 2 3 System defined Presets Purpose The section lists the system defined presets with special functions These presets cannot be edited They can only be called through a control device e g a DVR or web browser To call the system defined presets remotely you can choose the preset number from the list in the PTZ control panel Please refer to table below for details For instance preset 99 is the Start auto scan If you call the preset 99 the speed dome starts auto scan function Table 2 2 System defined Presets Function Set manual limit stops Remote reboot Access main menu Stop scanning Start random scanning Start frame scanning Start auto scanning Start tilt scanning Start panorama scanning Patrol 5 Patrol 6 Patrol 7 Patrol 8 Function Auto flip Return to initial position Patrol 1 Patrol 2 Patrol 3 Patrol 4 IR cut filter in IR cut filter out Pattern 1 Pattern 2 Pattern 3 Pattern 4 Shortcut Patrol Enable limit stops Note For details about shortcut patrol refer to the section 3 4 3
43. s connected and data can be normally received but the address setting is incorrect Cable is connected and data can be normally received but the command setting is incorrect Cable is connected and data can be normally received but the settings of address and command are incorrect Cable is connected but the received data does not comply with the requirements of Manchester code Time Task A time task is a preconfigured action that can be performed automatically at a specific date and time The programmable actions include preset 1 8 pattern 1 4 patrol 1 8 pan scan tilt scan random scan frame scan panorama scan day night mode or none Zone A zone is a user defined area The dome provides eight zones each with configurable label If the dome has dwelled at a zone without receiving any command over 4 minutes this feature will enable mo Hikvision User Manual of IR Speed Dome the dome to perform panorama scan within the zone Password The dome features password protection to prevent unauthorized changes to the dome settings RS 485 Failure Diagnostics In the presence of failure at the transmitting and receiving terminals of RS 485 communications the speed dome is capable of performing self test and detecting the fault results which will be displayed on the screen Soft Baudrate The baudrate of dome can be configured by the menu without need of DIP switch settings mo Hikvision User Manual of IR S
44. selectable If the SOFT BAUD ACTIVE is set as OFF the baudrate should be set by the DIP switch Note After you enable disable the soft baudrate the speed dome will reboot automatically to activate the settings PELCO checksum If the speed dome uses PELCO P or PELCO D protocol you can set the PELCO CHECKSUM as ON for improving the controlling effect System time configuration Steps 1 Move the cursor to SYSTEM TIME using the direction buttons and click IRIS to enter 2 Click the left right direction buttons to position the cursor on the specific item year month day or hour minute second of which you want to change the value mo Hikvision User Manual of IR Speed Dome 3 Click the up down direction buttons to increase decrease the value 4 Click IRIS button to confirm and exit 07 01 18 H M S 15 33 25 DONE OPEN QUIT CLOSE Figure 3 4 Set the System Time Zero angle initial position configuration Purpose You can define the initial position in the panning direction on the ZERO ANGLE submenu Steps 1 Move the cursor to ZERO ANGLE using the direction buttons and click IRIS to enter 2 Click the left right up down direction buttons to adjust the view angle 3 Click IRIS button to confirm and exit IRLED Parameters IR PARAMETER IR SENSITIVITY LOW N M LED CURRNT 2 FAR LED CURRNT 2 REFERENCE HEIGHT M N A REFERENCE ZOOM N A LED CONTROL AUTO BACK EXIT Figure 3 5 IR
45. ser defined interval You can set the on ALARM SEQUENCE submenu from 1 to 200 seconds 3 Configure the alarm rest delay If there s a linkage action has already been triggered by an alarm input the speed dome will only respond to the input from the same channel again after the user defined reset delay time This is the rest time that the speed dome considers an alarm to be active when it s physically cleared You can set the ALARM REST DELAY from 0 to 300 seconds 4 Resume the dome activity You can set ALARM RESUME to ON to enable the speed dome to resume its previous activity after the triggered actions finished mo Hikvision User Manual of IR Speed Dome Notes f the speed dome is moving when a linkage action is triggered it will stop at the current position and resume from this position after the linkage action finishes The speed dome can be configured to resume the PTZ positions focus and iris value 3 5 3 Configuring Auxiliary Alarm Output Purpose An auxiliary output is a configurable alarm output interface on the speed dome back box which can connect and trigger another alarm device to operate Steps 1 Enter the alarm auxiliary output configuration submenu MAIN MENUS gt DOME SETTINGS gt AUXS AUX AUX1 CLOSE DWELL TIME AUX2 DWELL TIME BACK EXIT Figure 3 28 Configure the AUX Output 2 Click IRIS to edit the status of the auxiliary outputs You can set the alarm output type as OPEN normally op
46. sources that usually flare across a scene This makes it possible to see the detail of the image that would normally be hidden The value ranges from 0 to 3 Resolution setting you can set HR MODE as ON to adjust the resolution lower to avoid cross color of the image or switch if OFF to disable the function This mode enhances edges and produces higher definition images Task 9 Configure the advanced settings Exposure compensation function You can set the EXPOSURE COMP value from 0 to 14 The default value is 7 White balance You can set WHITE BALANCE mode as AUTO INDOOR OUTDOOR SELFDEF self defined ATW auto tracking and HAUTO half auto AUTO In Auto mode the dome retains color balance automatically according to the current color temperature INDOOR OUTDOOR These two modes are for indoor use and outdoor use respectively SELFDEF In this mode you can adjust the color temperature manually to meet your own demand Note In SELFDEF mode you need to adjust the RED and BLUE values manually ATW In auto tracking mode white balance is continuously being adjusted in real time according to the color temperature of the scene illumination HAUTO Selecting this mode the viewed image retains color balance automatically according to the current color temperature Digital noise reduction To reduce the image noise you can set the NOISE REDUCE function OFF HIGH MID or LOW Image flip If you turn the IMAGE FLIP fu
47. te you enable the ZOOM and PT OSD both while calling a preset the preset label will be displayed on the screen until the preset finishes Display the viewing direction The speed dome shows the viewing direction when you manually control it to rotate Table 3 1 Viewing Direction Display Display N NE E SE S SW W NW Indication North Northeast East Southeast South Southwest West Northwest Note The due north direction is 02 It is also the factory default initial position 3 4 Configuring PTZ Control Parameters Purpose You can configure panning tilting and zooming movements and configure PTZ control functions including presets patrols patterns etc for the speed dome 3 4 1 Configuring PTZ Parameters Enter PTZ configuration menu MAIN MENUS gt DOME SETTINGS gt MOTION PARAMETER MOTION MOTION AUTO FLIP ON PRESET SPEED 4 PROPORTIONAL PAN OFF LIMIT STOP OFF PARK TIME 5 lt SETTING STOPS gt PARK ACT NONE CLEAR STOPS SCAN SPEED 40 ELEVATION SET OFF IMAGE FREEZE OFF DOME SPEED MID BACK EXIT BACK EXIT Figure 3 13 PTZ Configuration Descriptions of PTZ parameter configuration Auto flip In manual tracking mode when a target object goes directly beneath the speed dome the speed dome automatically rotates 180 degrees horizontally for tracking Note AUTO FLIP is set as ON for this speed dome by default Proportional Pan mo Hikvision User Manu
48. the IR cut filter mode to DAY mode and call preset40 to set as NIGHT mode D N level The D N level is the switching sensitivity for AUTO mode As a dividing line IR cut filter switches between DAY and NIGHT when the light condition reaches the user defined D N level Three levels are selectable 0 1 and 2 Note D N level configuration varies depending on the model of the speed dome Some models don t support D N level function Task 7 Set the BLC function You can set the BLC WDR value as ON or OFF to enable or disable the function BLC LEVEL You can manually adjust the backlight compensation level Note BLC level configuration varies depending on the model of the speed dome Some models don t support BLC LEVEL function CAMERA WIDE LIMIT CHROMA SUPPRESS SATURATION CONTRAST HLC HR MODE GAIN LIMIT BACK EXIT Figure 3 7 Further Settings Task 8 Configure the image quality parameters Chroma suppress You can adjust the value of CHROMA SUPRESS between 1 2 and 3 to suppress the color noises in low lighting environment Higher setting values produce stronger Hikvision User Manual of IR Speed Dome chroma suppressing effects Saturation The SATURATION value ranges from 0 to 7 Contrast adjust the image contrast on CONTRAST submenu between 0 and 7 Note The selectable values of contrast and saturation vary depending on the models of speed dome HLC High Light Compensation HLC masks strong light
49. title in the lower right corner or call preset 13 twice within 5 seconds to exit the title setting menu and display the title in the lower left corner or call preset 14 twice within 5 seconds to exit the title setting menu and display the title in the upper left corner or call preset 15 twice within 5 seconds to exit the title setting menu and display the title in the upper right corner Note After exit the SET TITLE menu you can call preset 12 twice within 5 seconds to delete the defined title and remove it from the screen Display the PTZ movements alarm system time etc Purpose You can enable or disable the on screen display of PTZ movements alarms time presets etc and configure the display time Steps 1 Enter the display settings menu MAIN MENUS gt DOME SETTINGS gt SYS INFO SETTINGS gt DISPLAY SETTINGS DISPLAY SETTINGS DISPLAY SETTINGS ZOOM SHOW 2 ADDRESS SHOW OFF PT SHOW a ERROR SHOW OFF ALARM SHOW ON FAN AND HEAT SHOW OFF TIME SHOW ON PRESET SHOW ON ZONE SHOW ON BACK EXIT BACK EXIT Figure 3 12 Display Settings 2 Move the cursor to DISPLAY SETTINGS using the direction buttons and click IRIS to enter mo Hikvision User Manual of IR Speed Dome 3 Move the cursor to the target item and click IRIS and click up down direction buttons to choose each display mode as ON or OFF and define each display time as 2 seconds 5 seconds or 10 seconds 4 Click IRIS button to confirm No
Download Pdf Manuals
Related Search