Bosch SGI69T05EU dishwasher
Contents
1. Main switch Additional options Time delay Check water supply indicator Salt refill indicator Rinse aid refill indicator Programme buttons Door Opener Digital display Programme sequence indicator some models Appliance interior 20 Upper basket with additional cup rack 21 Additional cutlery basket for the top basket 22 Top spray arm 23 Bottom spray arm 24 Dispenser for salt 25 Filters 26 Cutlery basket 27 Bottom basket 28 Lock for detergent dispenser 29 Dispenser for rinse aid 30 Detergent dispenser 31 Rating plate some models You will need to purchase the following before using the dishwasher for the first time special salt for use in dishwashers detergent rinse aid Only use products which are suitable for dishwashers Water softener In order to rinse dishes and glasses satisfactorily the dishwasher requires soft water i e containing little or no lime otherwise water stains will be left behind on crockery and glasses etc If the tap water exceeds a certain level of hardness it must be softened i e decalcified so that it can be used in the dishwasher This is achieved by adding a special salt to the water softener inside the dishwasher The water softener that is the required amount of salt is set up according to how hard the tap water is Setting up the wa2. Place objects in the dishwasher in such a way that items such as cups glasses pots pans etc are stood upside down curved items or those with recesses should be at a slant so that water can run off they are stacked securely and cannot tip over they do not prevent the spray arms from rotating while washing takes place Very small items should not be washed in the dishwasher as they could easily fall out of the baskets Removing the dishes To prevent water dripping from the top basket onto the dishes in the lower basket we recommend that you empty the lower basket first and then the top basket en Cups and glasses Upper basket 20 not included with all models Pots and pans Lower basket 27 11 en Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards The spray jet is then better able to reach the individual parts To prevent injuries place long pointed accessories and knives on the tag re some models or on the knife shelf available as an accessory Folding spikes on applicable models To improve stacking of pots and pans the spikes can be folded down Shelf not on all models Lean tall glasses and those with long stems against the shelf not against other items to be washed T 1 lt
3. D Wie LJN Long items serving cutlery salad servers or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms The shelf can be folded back when not required for use 12 Small accessories holder some models Light weight plastic accessories e g cups lids etc can be held securely in the small accessories holder Adjusting position of basket not on all models AA max max p 7 20 25cm 20 25cm Q M i E 8 es 2n max max 30 25 34 29cm PUN T i ar L E cui LAL If required the height of the top basket can be adjusted in order to create more space for large utensils either in the top or bottom basket Select one of the two following procedures according to the design of the top basket for your appliance model Top basket with upper and lower roller pairs Pull out the top basket Remove the top basket and re attach it en T
4. 0 157 001 Li Cc lt lt 6 lt LLLI mr mm ie an hase inii misi immu 7 mun j N js AAAA AA UN 1 QUUM je mymt en Index Safety instructions Getting to know your appliance Water softener Filling in the Adding rinse aid Not suitable for the dishwasher Arranging crockery glasses etc in the dishwasher Detergents sati socia i ounces OO ON OD Ff 11 14 16 Overview of programmes Washing dishes Information on programme sequence Additional functions Maintenance and care Fault finding Customer Service Information Installation Waste disposal 18 19 21 22 22 25 27 28 28 30 en Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit Do not use a damaged appliance but consult your supplier Please dispose of packaging material properly Installation Install and connect the appliance according to the i
5. spray arm is knocking against the dishes inside the appliance Rattling sound can be heard while washing is taking place Crockery has not been stacked properly inside the appliance Knocking sound coming from inlet valves his is caused by the way the water pipes have been laid and it has no effect upon the way the appliance functions There is no remedy for this With the dishes cutlery etc Remnants of food are stuck to the dishes cutlery etc Dishwasher was not loaded properly Jets of water could not reach all parts of the dishes etc Too many items in the rack Items in the rack were touching each other Not enough detergent was added to dispenser Selected wash programme was not intensive enough Rotation of spray arm was obstructed by dish etc Nozzles in spray arm are blocked by remnants of food Filters are blocked Filters have been incorrectly fitted Waste water pump is jammed Plastic items are discoloured Not enough detergent was added to dispenser White stains are left on crockery glasses have a milky appearance Not enough detergent was added to input compartment Amount of rinse aid was set too low Although water is quite hard no salt has been put in appliance Water softener was set too low Lid on salt container is screwed tight f you used a phosphate free detergent try a de
6. the salt refill indicator water softening system has been switched off Switch off the main switch The set value is stored within the device Approx 4 litres of water are required to regenerate the water softening system As a result the water consumption per rinse cycle increases by 0 to maximum 4 litres depending on the water hardness setting A Note If you use the detergent and rinse aid separately or switch from combined detergents to standard cleaning products ensure that the rinse aid refill indicator has been switched on and the water softening system has been set to the correct water hardness en Overview of programmes The max possible number of programmes is illustrated in this overview The corresponding programmes for your appliance can be found on the fascia Type of dishes e g porcelain pans Non Mixed Delicate cutlery sensitive glasses etc Type of food remnants e g Soups souffl s Coffee Soups Coffee Rinse if the potatoes pastries cake milk potatoes cake milk utensils rice eggs fried sausage pastries sausage have been food cold drinks rice eggs cold drinks left several salads fried food salads days prior to washing in the dishwasher Amount of food l remnants Large Little Normal Very little IER High Lightly Adhesive Normal Low Wash programme
7. under running water Reassembly Insert the filter system and screw down with the filter cylinder en 23 en Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings Inspect the nozzles in the spray arms for blocked holes due to remnants of food If necessary pull the lower arm 23 upwards and lift it off Unscrew the upper spray arm 22 Clean both spray arms under running water Refit the spray arms Ensure that the lower arm has locked into place and the upper one is screwed tight 24 Pump on applicable models Larger remnants of food that have not been trapped by the filters and have been left in the water can cause a blockage in the pump The water is no longer pumped out of the dishwasher and it can be seen covering the filter Proceed as follows First always disconnect the appliance from the power supply Ladle out as much water as possible Remove the filters 25 Undo the screw in the cover Torx T 20 and remove the cover Inspect the inside and remove any obstructions that you find Re insert the cover and screw down Re insert the filters and screw down Fault finding Resolving minor problems yourself Experience has shown that you can resol
8. www bosch hausgeraete de 638x
9. Auto Auto Auto Eco Quick Prerinse 65 75 552 652 352 452 502 45 Y Ye Lg 7 gt gt pues Prerinse Prerinse sequence The programme sequence Clean Clean is optimised and adjusted 50 45 according to the degree of soiling on the utensils Interme Interme diate rinse diate rinse Clean Clean 65 55 i 0 Dry 18 Washing dishes s Reduce costs If only a small number of dishes have been loaded into the dishwasher selecting a programme that operates at the next lowest temperature will usually suffice Programme data The programme specifications can be found in the summary of instructions Programme specifications refer to normal conditions Greater deviations may occur due to different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine related factors e g temperature water volume Energy and water consumption is reduced by up to 1 4 when dishes are washed in the upper basket only Water consumption values are based on a water hardness setting of 4 Aqua sensor on applicable models The Aqua sensor is an optical measuring device which measures the turbidity of the rinsing water A light barrier can detect dissolved food remnants in the water e g egg fat and
10. oats The Aqua sensor is used according to the programme When the Aqua sensor is active clean rinsing water may be transferred into the next rinsing bath and or the temperature adjusted If the turbidity is greater the water is drained and is replaced with fresh water In this way the water consumption is reduced by approx 4 litres for utensils which are less dirty en Switching the dishwasher ON Turn on the tap Set main switch to ON Indicators light up according to the last programme that was selected This same programme will run again if no other programme button 7 is pressed numerical display 9 shows the expected duration of the programme Close door The programme starts automatically Optical indicator during operation With some models During the rinse programme a light point appears on the floor below the device s door Only open the dishwasher door when the light point has disappeared In the case of built in dishwashers with flush front the light point will not be visible Remaining running time display When the appliance has started the expected programme running time is displayed The programmed running time is affected by the water temperature the number of dishes as well as the degree of soiling If these conditions are changed the running time depending on the selected programme can vary greatly As the effe
11. tap off Does not apply when Aqua Stop unit has been fitted Remove dishes etc when they cooled down Interrupting the programme Open the door Caution There is a risk of water squirting out from inside the appliance Do not open the door fully until the spray arm has stopped rotating Set main switch to OFF Indicator lights extinguish The programme is retained in the dish washer memory If the hot water was switched ON or the appliance has already heated up and then the appliance door opened leave the door ajar for several minutes and then close Otherwise the appliance door may fly open due to expansion n order to continue with the stored programme set the main switch to ON again and close the door Cancel programme Reset Only when the master switch is ON Press the A and C buttons simultaneously and hold them pressed for approx 3 seconds The numerical display shows 1j Close the door The programme continues for approx 1 min When it has ended set the main switch 1 to OFF To restart the dishwasher set main switch 1 to ON again and select desired programme Intensive drying If the Intensive drying function is activated the temperature of the final rinse is increased in all programmes and you will therefore receive an improved drying result Note
12. temperature should not exceed 60 C Electrical connection Connect the appliance only to 230 V alternating current via a correctly installed Socket with protective conductor See rating plate for required fusing 31 The socket must be attached near the dishwasher and be freely accessible The connection may be modified by an electrician only Use only a residual current operated circuit breaker which features the symbol Only this circuit breaker guarantees compliance with the currently valid regulations Removing the appliance It is essential when removing the appliance to observe the following sequence First disconnect the appliance from the power supply Pull out the mains plug Turn off the water supply Disconnect the waste water and fresh water connections en Loosen the fastening screws under the worktop If fitted remove the base panel Pull out the appliance carefully pulling the hose behind Transporting the dishwasher Drain water from the dishwasher Secure all loose parts The appliance should only be transported in an upright position f the appliance is not kept upright during transport any water left inside may seep into the control module and cause subsequent errors with programme functions appliance must be drained in the following sequence on the tap Set main switch to ON Select the B programme The programme duration in minutes i
13. the programme starts The recommended detergent amount is approx 5 g poured onto the inside of the door 3 Saving time VarioSpeed gt gt Save time function can reduce the running time by approx 2096 to 5096 depending on the selected rinse programme The particular change in the running time is indicated on the time remaining display To obtain optimum cleaning and drying results at a reduced running time water and energy consumption are increased Half load If you have only a few items to wash e g glasses cups plates you can switch to Half load The half load additional function saves water energy and time It is recommended to put a little less detergent in the detergent dispenser than for a full load Washing contents of LOWER RACK only If you have a small number of dishes to wash in the lower rack e g plates pans bowls switch on the LOWER RACK function If you select the LOWER RACK function the upper rack must be empty Add a reduced amount of detergent compared to that which is recommended for a full load 22 Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults This saves time and prevents problems Therefore you should occasionally have a careful look inside your dishwasher Overall condition of the machine Check spray arm for grease and limescale deposits If you find such deposits Fill
14. the detergent dispenser with detergent start the appliance without utensils in the programme which has the highest wash temperature Clean the appliance with detergents appliance cleaners which are particularly suitable for use with dishwashers Regularly wipe the door seal with a damp cloth to remove deposits Never use a steam cleaner to clean your dishwasher The manufacturer is not liable for any consequential damage Regularly wipe the front of the appliance and panel with a damp cloth water and a little washing up liquid will suffice Do not use sponges with a rough surface or abrasive detergents as these could scratch the surfaces A Attention Never use other chlorinated household detergents Health hazard Special dishwasher salt Check the LOW SALT indicator 5 Top up with salt if required Rinse aid As soon as the rinse aid refill indicator lights up on the control panel 6 refill with rinse aid Filters The filters 25 prevent larger remnants of food or other objects from getting inside the pump This residue can occasionally clog up the filters The filter system consists of a filter cylinder a flat fine filter and depending on the model a microfilter Inspect the filters for obstructions every time the dishwasher has been used Byunscrewing the filter cylinder you can remove the filter system Remove any food remnants and clean the filters
15. the higher temperature may not be suitable for fragile utensils Hold down the programme button A and switch on the main switch Release both buttons The digital display 9 flashes on or off change the setting press the programme button A Switch off the main switch the setting is stored u en Information on programme sequence When the appliance starts the following displays are indicated sensor ok Sensors At the start of every programme all sensors temperature sensor Aqua sensor motor sensor are tested 0 Spray pressure Symbol indicates the different spray pressures in the system Hygienic washing When the symbol is displayed the utensils are hygienically clean Keep the door closed otherwise hygienic washing is not guaranteed Programme sequence indicator Your dishes are being cleaned 4 Your dishes are being rinsed Your dishes are being dried 21 en Additional functions on some models additional functions 2 can be set with the buttons Pre Soak The Pre Soak programme option serves to perform a pre soak cycle before the main programme This cycle enables cookware e g pans bowls etc to be pre soaked and pre rinsed in the lower rack If you wish to pre soak the dishes this programme option must be selected by pressing the Pre Soak button before
16. ct is not detected until a programme is running the time may be longer or shorter than expected en Time delay on applicable models You can delay the start of the programme in 1 hour steps up to 19 hours Switch on the appliance Press the timer programming button 3 until the digital display 9 jumps to th Keep pressing the timer programming button until the required time is displayed To delete the timer programming keep pressing the button until is displayed You can change your programme selection at any time until the programme starts End of programme The end of the programme is indicated by a buzzer This function can be changed as follows Hold down Function button C pressed and switch on main switch 1 then let the buttons go Function Button C flashes and the digital display indicates the value 2 which was set at the factory semi loud To change the setting Press Function button C Each depression of the button increases the set value by one when 3 is reached the display jumps back to off Switch off the main switch The set value is stored in the appliance 20 Switching the dishwasher OFF Several minutes after the programme has ended Open the door when the programme has ended Set main switch to OFF Turn the water
17. disposed of the plastic waste can be sorted for environmentally friendly recycling Please ask your dealer or inquire at your local authority about current means of disposal Disposal of the packaging Please dispose of the packaging material in an environmentally friendly manner Keep children away from shipping carton and packaging components Danger of suffocation from folding cartons and plastic film Corrugated cardboard consists mainly of wastepaper The moulded polystyrene parts do not contain any chlorofluorohydrocarbons 30 The polyethylene film PE consists partly of secondary raw materials The wooden frames if fitted are made of untreated residual wood The hoops if fitted consist of polypropylene PP Disposal of redundant appliances Make redundant appliances unusable to prevent subsequent accidents Dispose of the appliance in an environmentally friendly manner AN Warning Children could become locked in the appliance risk of suffocation or find themselves in other dangerous situations Therefore Pull out the mains plug sever and dispose of the power cord Destroy the door lock so that the door can no longer be closed This appliance is labelled in accordance with European Directive 2002 96 EG concerning used electrical and electronic appliances waste electrical and electronic equipment WEEE The guideline determines the framework for the return and
18. elivery Your dishwasher was checked at the factory to ensure that it was in perfect working order This may have left some small water stains in the dishwasher These will disappear after the first rinse cycle Installation The required installation dimensions can be found in the installation instructions Using the height adjustable feet adjust the appliance until it is level Ensure that the appliance is standing firmly Waste water connection See the installation instructions for the required connection steps If required attach a siphon with drainage spigot Using the enclosed parts connect the waste water hose to the drainage spigot of the siphon Ensure that the drainage hose is not kinked crushed or twisted ensure that there is no sealing cover which prevents the waster water from flowing away Fresh water connection Using the enclosed parts connect the fresh water connection to the tap according to the installation instructions Ensure that the fresh water connection is not kinked crushed or twisted When replacing the appliance always connect a new water supply hose to the water supply The old supply hose must not be re used Water pressure Minimum 0 05 MPa 0 5 bar maximum 1 MPa 10 bar If the water pressure is higher install a pressure reducing valve Flow rate Minimum of 10 litres per minute Water temperature We recommend that you use cold water If you do use hot water the
19. fault or one of the problems previously discussed is not free of charge even during the warranty period 27 en Information Notes on comparison tests You will find details of the conditions for the comparison tests on the additional Notes on comparison tests sheet The consumption values for the relevant programmes are given in the introduction General Built under and integrated appliances which are subsequently installed as free standing appliances must be secured to prevent them from falling over e g by screwing them to the wall or by installing them under a continuous worktop which is screwed to the adjoining units For Swiss version only The appliance can be installed without difficulty between wooden and plastic walls in a kitchen range If the appliance is not connected via a plug the installation side must feature an all pole disconnector with a contact gap of at least 3 mm in order to satisfy the relevant safety regulations 28 Installation The dishwasher must be connected by a qualified technician to ensure correct operation The specifications for supply drainage and connected load must fulfil the required criteria as stated in the following paragraphs or in the installation instructions Install the appliance in the following sequence Check the delivery Install the appliance Connect the waste water Connect the fresh water Connect the power supply D
20. g up liquid Nowadays there are three types of dishwasher detergent available 1 those containing phosphates and chlorine 2 those containing phosphates but no chlorine 3 those containing neither phosphates nor chlorine When a phosphate free detergent is used in conjunction with hard water there is a greater possibility that white marks will be left behind on crockery and glasses etc These can be avoided by pouring an increased amount of detergent into the dispenser Chlorine free detergents have a reduced bleaching effect This can mean that tea stains are not completely removed or plastic items become discoloured This can be resolved by selecting a higher temperature programme or increasing the amount of detergent Or using a detergent that contains chlorine Check the label on the detergent packaging to determine whether a particular product is suitable for use with silverware If you have any further questions we recommend that you contact the customer advice departments of the various detergent manufacturers Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line When the compartment is full it contains 40 ml If the detergent dispenser 30 is still closed p
21. gents determines their effectiveness A Note Even if the rinse aid and or salt refill indicator is lit the rinse programme runs correctly when 3in1 products are used If the rinse aid refill indicator 6 or salt refill 5 indicator is defective and you would like to switch it off proceed as follows Switching the rinse aid refill indicator off and on You can switch the rinse aid refill indicator 6 on or off This function can be changed as follows Hold down the programme button 3 and press the main switch until the digital display lights up then release the buttons 9 is indicated on the digital display rinse aid refill indicator on By pressing the programme button you can switch off 0 or switch on the rinse aid indicator Switch off the main switch 1 the setting is saved en Switching the salt refill indicator water softening system off and on Hold down the programme button B and switch on the main switch then release the buttons The illuminated button B and the factory set value on the digital display flash J To change the setting press the programme button _B Each time the button is pressed the set value increases by one when the value is reached the display jumps back to HO
22. hwasher only in the household and only for its designed purpose i e for washing domestic dishes Do not lean or sit on the open door The appliance could tip Please note that free standing appliances may tip over if the baskets are overloaded The water in the appliance is not drinking water Do not add any solvents to the washing chamber Danger of explosion Open the door carefully when the programme is still running Water could spray out of the appliance To prevent injuries e g caused by stumbling open the dishwasher only briefly in order to load and unload the dishwasher Read and observe the safety information and instructions for use on the packaging for cleaning and rinsing agents Children in the household Do not let infants play or operate the dishwasher Keep cleaning and rinsing agents out of the reach of infants These may cause chemical burns in the mouth throat and eyes or asphyxiation Keep infants away from the open dishwasher It could contain residue of the cleaning agent f the appliance is installed at eye level ensure when opening and closing the door that children are not caught or crushed between the appliance door and the cupboard door situated below Child proof lock some models Comply with the drawings in the back of the envelope 40 Switch on the child proof lock 41 Open the door with child proof lock switched on 42 S
23. id control has been set to 4 in the factory The rinse aid is required for stain free utensils and clear glasses Use only rinse aid for domestic dishwashers Open the cover on the rinse aid dispenser 29 To do this press the Do not alter the setting of the rinse aid mark 1 on the cover and control unless streaks turn knob towards simultaneously lift the cover on the or water marks turn knob towards control plate 2 fft are left on the dishes 29 Rinse aid controller Rinse aid refill indicator Carefully pour in the rinse aid to just As soon as the rinse aid refill indicator below the edge of the filler opening lights up on the control panel 6 refill with rinse aid If using detergent products with integrated rinse aid the rinse aid refill indicator can be switched off see Switching the rinse aid refill indicator off and on in the auto 3in1 chapter Close the lid ensuring that you hear it snap closed To prevent excessive foam formation during the next rinse cycle remove any rinse aid which has run over with a cloth en Not suitable for the dishwasher The following should not be cleaned in the dishwasher Wooden cutlery and utensils these will leach out and become unsightly even the utilised stickers are not suitable for the temperatures which occur Sensitive orname
24. l the salt container is full max 1 5 kg When you refill the salt water is being displaced and drains off Refill with salt always just before switching on the appliance in order to prevent corrosion As a result any salt solution which has run over will be immediately diluted and flushed out Then clean the filling area of salt residues and screw the compartment lid back on without tilting the lid The LOW SALT indicator 5 on the front panel will light up initially but will extinguish again after a short period when the salt solution has become sufficiently concentrated When the control is set to HH it is not necessary to fill up with salt as none will be consumed while the dishwasher is operating The LOW SALT indicator is switched off If the control is set between and H 7 then salt must be added to the dispenser AN Warning Do not pour detergent into the container for special salt This would destroy the water softener Salt refill indicator As soon as the salt refill indicator 5 is lit on the control panel refill with salt immediately before the next rinse cycle Depending on the washing frequency and the hardness setting the regeneration salt may not have to be topped up for several months en Adding rinse aid Adjusting the amount of rinse aid The amount of rinse aid added to the water can be varied by adjusting the stepless control The rinse a
25. nstallation and assembly instructions dishwasher must NOT be connected to the power supply during installation Ensure that the protective conductor system of the domestic electricity supply has been installed correctly Electrical connection conditions must correspond with the specifications on the rating plate of the dishwasher f the dishwasher is to be installed in a high sided unit ensure that the unit is attached properly and also at the rear Built under and built in appliances should always be installed under a continuous work surface which is attached to the adjacent cupboards in order to ensure that the appliance is entirely stable After the appliance has been installed the mains plug should still be easily accessible Not on all models The plastic housing on the water input contains an electrically operated valve The connecting wires are inside the inlet hose Do not cut through this hose and do not immerse the plastic housing in water AN Warning For safety reasons if the appliance is not fitted in a recess thereby making a side wall accessible the door hinge area should be covered at the side Risk of injury Covers are available as optional accessories from customer services or specialist stores In daily use AN Warning Knives and other utensils with sharp points must be placed in the baskets either flat or with the points downwards Use the dis
26. nt Indicator lamps do not extinguish after washing has finished Indicator lamps do not extinguish after washing has finished Main switch is still set to ON Check water supply display 4 lights up turned off Water supply interrupted Filter in the water supply blocked Supply hose kinked Remnants of detergent stuck inside dispenser Compartment was damp when it was filled up with detergent Compartment must be dry before detergent is added 25 en Refill display does not light up Rinse aid refill indicator switched off see auto 3in1 chapter Salt refill indicator switched off see auto 3in1 chapter Water remains inside appliance after programme has ended Blockage or kink in drainage hose Pump is jammed Filters are blocked The programme is still running Wait for the programme to end numerical display will indicate O Perform Reset function during washing 26 Unusual amount of foam is created Normal washing up liquid has been poured into the rinse aid container Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle Appliance stops suddenly while washing is taking place Cut in electricity supply to appliance Water supply has been interrupted Knocking sound can be heard while washing is taking place
27. ntal glasses craft utensil and vases special antique or irretrievable utensils These ornaments are not dishwasher proof Plastic parts sensitive to hot water QCopper and tin utensils Utensils which are soiled with ash wax lubricating grease or ink Absorbent materials such as sponges and cloths Aluminium and silver parts have a tendency to discolour and fade during the wash cycle Even some types of glass e g crystal glass objects may turn cloudy after many wash cycles Recommendation In future buy utensils which are identified as dishwasher proof Damage to glassware and other dishes Possible causes type of glass or manufacturing process chemical composition of detergent water temperature and duration of dishwasher programme Suggested remedy Use glassware or porcelain dishes that have been marked dishwasher proof by the manufacturer Usea mild detergent that is described as kind to dishes If necessary seek further information from detergent manufacturers Select a programme with as lowa temperature and as short a duration as possible To prevent damage take glass and cutlery out of the dishwasher as soon as possible after the programme has ended Arranging crockery glasses etc in the dishwasher Loading the dishwasher Scrape off any large amounts of left over food It is not necessary to rinse the dishes under running water
28. op basket with side levers Rackmatic Pull out the top basket lower the basket press in succession the two levers on the left and right sides of the basket Always take hold of the side of the basket on the upper edge otherwise the basket will not drop smoothly and may To raise the basket take hold of the basket on the upper edge and pull upwards Before you re insert the basket ensure that it is at the same height on both sides Otherwise the appliance door cannot be closed and the upper spray arm will not connect to the water circuit en Baking sheet spray head some models You can clean large baking sheets or grilles with the baking sheet spray head To do this remove the top basket and insert the spray head as illustrated in the diagram Ji To ensure that the spray jet can reach all parts arrange the baking sheets as illustrated max 4 baking sheets and 2 grilles A Note Never operate the dishwasher without the top basket or baking sheet spray head 14 Detergents Information about detergents You can use any brand of liquid or powder detergent as well as tablets that have been specifically designed for use in domestic dishwashers Do not use normal washin
29. recycling of used appliances as applicable throughout the EU en Subjekt to modification en AQUA STOP Warranty not applicable to appliances without Aqua Stop In addition to warranty claims against the seller based on the sales agreement and in addition to our appliance warranty we shall replace the appliance under the following conditions 1 If damage is caused by water due to a malfunction of our Aqua Stop system we shall make good the damage in the case of private consumers This liability warranty is valid for the service life of the appliance 3 he warranty claim is subject to correct installation and connection of the appliance in accordance with our instructions This also includes correct installation of the Aqua Stop extension original accessory Our warranty does not cover defective supply lines or fittings up to the Aqua Stop connection on the tap 4 n principle it is not necessary to monitor an appliance fitted with Aqua Stop during operation or to secure it afterwards by turning off the tap You should only turn off the tap if you are absent from home for a prolonged period e g on holiday for several weeks Robert Bosch Hausger te GmbH Carl Wery StraBe 34 81739 M nchen To contact us directly use the tel no or fax no in the enclosed customer service list Bosch Info Team DE Tel 0180 5 30 40 50 EUR 0 12 Min DTAG AT Tel 0660 59 95 Internet 9000 157 001 en 8601 http
30. ress the lock 28 to open the detergent dispenser Adding detergent Fill the dispenser with detergent Please observe the manufacturer s instructions printed on the detergent packaging when determining the correct dosage AN Important Due to the different solvency properties of the detergent tablets supplied by various manufacturers the cleaning efficiency of the detergent may not be fully utilised by short programmes It is recommended to use washing powder for these programmes When you select the Auto 65 75 programme tip an extra 10 15 ml of detergent onto the inside surface of the door en gt gt gt Reduce costs If your dishes are only moderately dirty you may be able to use less detergent than recommended Close the lid on the detergent compartment Press down the lid 1 until it clicks shut 2 f you are using detergent in tablet form read the manufacturer s recommendations on the packaging in order to determine where the tablets should be placed inside the dishwasher e g in cutlery basket detergent compartment etc Make sure that the lid on the detergent compartment is closed even if you are using tablets en auto 3in1 The use of so called combined detergent products may make the use of rinse aid and or salt unnecessary There are currently several types of combined detergent products available 2in1 They contain dete
31. rgent and rinse aid or salt function 3in1 They contain detergent rinse aid and salt function 4in1 They contain a detergent rinse aid salt function and an additional glass protection component In addition other combined products with a comparable effect are offered according to the manufacturer gt gt gt Always check the type of detergent or combined product which you are using Always follow the operating instructions or the information on the packaging The rinse programme is automatically adjusted in order to obtain the best possible rinsing and drying result Observe the following important information if using combined cleaning products Regeneration salt is not required up to a water hardness of 21 dH 37 fH 26 Clarke 3 7 mmol l only No other settings on the appliance are required Salt is still required if the water hardness is above 21 dH 37 fH 26 Clarke 3 7 mmol l Fill the salt dispenser with salt 24 and select setting 6 on the water softening system If in doubt please contact the detergent manufacturer especially if the utensils are very wet at the end of the programme limescale forms A AN Note Optimum rinsing and drying results can be obtained by using standard detergents in conjunction with separate application of salt and rinse aid Observance of the operating instructions or information on the packaging of the combined deter
32. s shown in the numerical display Close the door Wait for approximately 4 minutes Terminate the programme by pressing A and simultaneously The time display changes to 0 Close the door Wait a further minute and then switch the appliance off Turn off the tap Protection from freezing temperatures If the appliance is installed in a location where there is a risk of freezing temperatures e g in a holiday home all water must be completely drained out of the interior see Transporting the dishwasher Turn OFF the tap disconnect the supply hose and allow to drain 29 en Waste disposal Disposal Old appliances are not worthless rubbish Valuable raw materials can be reclaimed by recycling old appliances Pull out the mains plug of the redundant appliance Cut off the power cord and discard with mains plug To prevent children from locking themselves in the appliance and suffocating destroy the door lock and childproof lock if fitted You received your new appliance in a protective shipping carton All packaging materials are environmentally friendly and recyclable Please contribute to a better environment by disposing of packaging materials in an environmentally friendly manner All plastic parts of the appliance are identified by internationally standardised symbols e g PS polystyrene When the appliance is being
33. ter softener Determine the level of hardness of your tap water Your local water company or service agent can help you with this Identify setting from the following water hardness table Water hardness table dH Clarke mmol l 0 0 0 11 2125 9 10 1 2 1 4 dos 11 12 1 5 1 0 5 21 13 15 1 9 2 1 13 16 22 29 16 20 2 2 2 9 90 97 21 26 3 0 3 7 22 30 38 54 27 38 3 8 5 4 31 50 55 89 39 62 5 5 8 9 Hold down programme button and switch on the main switch then release both buttons The LED for button B flashes and the digital display displays the factory setting H4 To change the setting press programme button B Each time the button is pressed the set value increases by 1 after H the setting goes back to Switch off the main switch 1 The chosen setting has now been stored Approx 4 litres of water are required for regenerating the water softening system The overall water consumption per load can therefore be increased by between 0 and a maximum of 4 litres according to the water hardness setting en Filling in the Salt Open the screw type cap of the compartment 24 AN Warning Before switching on the appliance for the first time pour approx 1 litre of water into the salt dispenser Then refill with salt not cooking salt unti
34. tergent containing phosphates and compare results Dishes cutlery etc have not been dried Selected programme did not include drying function Amount of rinse aid was set too low Items were removed from dishwasher too soon Glasses have a dull appearance Amount of rinse aid was set too low Tea stains or traces of lipstick have not been completely removed Detergent does not have sufficient bleaching effect Washing temperature was set too low Traces of rust on cutlery Cutlery is not sufficiently rustproof Salt content in washing water is too high Lid on salt container is not screwed tight Too much salt was spilt while filling container Glasses become clouded and discoloured coating cannot be wiped off Unsuitable detergent was used Glasses are not dishwasher proof Smears left behind on glasses and cutlery glasses have acquired a metallic appearance Amount of rinse aid set too high en Customer Service Please call your local service agent if you are not able to resolve any problem yourself The name of your nearest service agent is shown in the Customer Service address list When you call please provide details of the model number 1 and the production FD number 2 which are shown on the nameplate 31 on the appliance door A Attention Please note that a visit by the customer service technician in the event of a
35. ve most problems that arise during normal daily usage yourself without having to call out a service engineer Not only does this save costs but it also means that the appliance is available for use again that much sooner The following list of common occurrences and their remedies should help you identify the causes of most problems Problems A Attention Remember Repairs may be carried out by a technician only If a component has to be replaced ensure that only original spare parts are used Improper repairs or use of non original spare parts may cause considerable damage and put the user at considerable risk When the appliance is switched on The appliance does not start mains fuse has tripped appliance plug has not been inserted appliance door has not been shut properly The tap has not been turned on en The filter on the water supply hose is blocked Switch off the appliance and pull out the mains plug Turn off the tap Then clean the filter which is situated at the connection of the supply hose Finally restore the power turn on the tap and switch on the appliance With the appliance itself Lower spray arm rotates with difficulty Spray arm is blocked by small items or food remains Lid in detergent compartment cannot be closed Detergent compartment has been overfilled Mechanism is clogged with remnants of deterge
36. witch off the child proof lock When the door is open the child proof lock offers no protection If a fault occurs Repairs or other work on the dishwasher should only be carried out by a qualified specialist The dishwasher must be disconnected from the electricity supply before any repairs or other work are started Pull the mains plug out of the wall socket or switch off at the fuse box Grasp the plug to remove it from the socket do not tug on the cable Turn the water off at the tap en When disposing of old appliances Appliances that have reached the end of their service life should be rendered inoperable in order to exclude the possibility of subsequent accidents Pull the mains plug out of the wall socket cut through the connecting cable and disable the door lock Take the appliance to a designated waste disposal centre AN Warning Children could get locked in the appliance risk of suffocation or get stuck in other positions Therefore Remove the mains plug cut the mains wire and set aside Damage the door lock so that the door can no longer be closed en Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front Individual positions are referred to in the text Control panel Ory By Oo Poy eS 10
Download Pdf Manuals
Related Search