Home

Hikvision Digital Technology DS-2DF7276-A surveillance camera

1. Figure 6 39 Text Overlay Settings 6 6 Configuring and Handling Alarms Purpose This section explains how to configure the network speed dome to respond to alarm events including motion detection external alarm input video loss tamper proof ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome and exception These events can trigger the alarm actions such as Notify Surveillance Center Send Email Trigger Alarm Output etc For example when an external alarm is triggered the network speed dome sends a notification to an e mail address 6 6 1 Configuring Motion Detection Purpose Motion detection is a feature which can trigger alarm actions and actions of recording videos when the motion occurred in the surveillance scene Steps 1 Set the Motion Detection Area Steps 1 Enter the motion detection settings interface Configuration gt Advanced Configuration gt Events gt Motion Detection 2 Check the checkbox of Enable Motion Detection Enable Motion Detection iVi Enable Dynamic Analysis for Motion Area Settings aff 4 7 ene ae odd er pense pe pa Figure 6 40 Enable Motion Detection 3 Click Drawarea Click and drag the mouse on the live video image to draw a motion detection area Note You can draw up to 8 motion detection areas on the same image HE Hikvision Digital Technology Co Ltd All Rights Reserved
2. Send Email Upload to FTP Trigger Channel Other Linkage Trigger Alarm Output Select All JA 1 A 2 Figure 6 43 Linkage Method Check the checkbox to select the linkage method Notify surveillance center send email upload to FTP trigger channel and trigger alarm output are selectable Notify Surveillance Center Send an exception or alarm signal to remote management software when an event occurs Send Email Send an email with alarm information to a user or users when an event occurs Note To send the Email when an event occurs you need to refer to Section GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome nT 6 3 10 Configuring Email Settings to set the Email parameters Upload to FTP Capture the image when an alarm is triggered and upload the picture to a FTP server Note You need a FTP server and set FTP parameters first Refer to Section 6 3 8 Configuring FTP Settings for setting FTP parameters Trigger Channel Record a video when an event occurs Note You have to set the recording schedule to realize this function Please refer to Section 7 2 Configuring Recording Schedule for settings the recording schedule Trigger Alarm Output Trigger one or more external alarm outputs when an event occurs Note To trigger an alarm output when an event occurs please refer to Section 6 6 5 Configuring Alarm Output to set the alarm output pa
3. HIKVISION IR High definition Network Speed Dome User Manual UD 6L0201D1111A01 User Manual of Network Speed Dome 1 Thank you for purchasing our product If there are any questions or requests please do not hesitate to contact the dealer This manual applies to Network Speed Dome This manual may contain several technical or printing errors and the content is subject to change without notice The updates will be added to the new version of this manual We will readily improve or update the products or procedures described in the manual DISCLAIMER STATEMENT Underwriters Laboratories Inc UL has not tested the performance or reliability of the security or signaling aspects of this product UL has only tested for fire shock or casualty hazards as outlined in UL s Standard s for Safety UL60950 1 UL Certification does not cover the performance or reliability of the security or signaling aspects of this product UL MAKES NO REPRESENTATIONS WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT 0500041030710 GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 2 Regulatory Information FCC Information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed
4. User Manual of Network Speed Dome Add user User Name Level Operator Password Confirm Basic Permission E Remote Parameters Settings E Remote Log Search Interrogate Working Status E Remote Upgrade Format E Remote Two way Audio Remote Shutdown Reboot Remote Notify Surveillance Center Trigger Alarm Output Remote Video Output Control oa a Remote Serial Port Control Figure 10 2 Add a User Modify a User Steps 1 Left click to select the user from the list and click 2 Modify the User Name Level or Password 3 uncheck the permissions OK P ie 4 Click to finish the user modification 93 Camera Configuration Remote Live View Remote PTZ Control Remote Manual Record Remote Playback In the Basic Permission field and Camera Configuration field you can check or ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Modify user User Name tes Level Operator Password LLIT Contirm eeeeee Basic Permission Camera Configuration C Remote Parameters Settings Remote Live View Remote Log Search Interrogate Working Status Remote PTZ Control E Remote Upgrade Format Remote Manual Record Remote Two way Audio Remote Playback Remote Shutdown Reboot Remote Notify Surveillance Center Trigger Alarm Output E Remote Video Output Control Remote Serial Port Control Cance
5. User Manual of Network Speed Dome 89 2 Set the linkage type of capturing the pictures as timing alarm motion etc 3 Set the start time and end time Click Search The corresponding picture files are listed on the left 4 Check the checkbox in front of the files that you need to download 5 Click to download the files d No File Name File Date File Size Progress Timing v Start Time 2013 07 8 00 00 00 End Time 2013 07 8 23 59 59 Q Search E Download Figure 8 8 Picture Downloading interface GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 90 Chapter 9 Log Searching Purpose The operation alarm exception and information of the speed dome can be stored in log files You can also export the log files on your demand Before you start Please configure network storage for the speed dome or insert a SD card in the speed dome Steps 1 Click on the menu bar to enter log searching interface Live View Playback Log Configuration admin py Logout Time Major Type Minor Type Channel No Local Remote User Remote Host IP Search Log Major Type All Types x Minor Type All Types Start Time 2012 06 26 00 00 00 End Time 2012 06 26 23 59 59 Q Search kH Save Log Figure 9 1 Log Searching Interface 2 Set the log search conditions to specify the search including the Major Type Minor Type Start Time and End Time as shown in Fi
6. ADDRESS 0 COMMUNICATION 0000 0 0 0 SOFTWARE VERSION V000 CAMERA VERSION V000 LANGUAGE ENGLISH Figure 4 1 Power up information 4 2 Live View Page Purpose The live video page allows you to view live video capture images realize PTZ control set call presets and configure video parameters Log in the network speed dome to enter the live view page or you can click Live View f on the menu bar of the main page to enter the live view page GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 22 Descriptions of the live view page Menu Bar Live View Playback Configuration aamin cot Click to show or hide Live View Parameters PTZ control panel PTZ control Preset 1 Live view window Preset 2 Preset 3 Preset 4 Preset Preset patrol pattern Preset 6 Preset 7 Preset 8 Toolbar Figure 4 2 Live View Page Menu Bar Click each tab to enter Live View Playback Log and Configuration page respectively Live View Window Display the live video Toolbar Operations on the live view page e g live view capture record audio on off two way audio etc PTZ Control Panning tilting focusing and zooming actions of the speed dome The lighter wiper one touch focus and lens initialization control Preset patrol pattern Set and call the preset patrol pattern for the speed dome Live View Parameters Configure the image
7. Bangkok Hanoi Jakarta Ww Figure 6 5 Time Zone Settings Configuring Daylight Saving Time summer time Purpose If there is the habit of adjusting clocks forward in your country in certain time period of a year you can turn this function on The time will be adjusted automatically when the Daylight Saving Time DST comes Steps 1 Enter the DST interface by Configuration gt Advanced Configuration gt System gt DST 2 Check EnableDST to enable the DST function 3 Set the date of the DST period 4 Click as to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 44 DST Wi Enable DST Start Time Apr First Sun 02 o clock End Time Oct Last Sun 02 o clock DST Bias 30min gt Figure 6 6 DST Settings 6 3 Configuring Network Settings 6 3 1 Configuring TCP IP Settings Purpose TCP IP settings must be properly configured before you operate the speed dome over network IPv4 and IPv6 are both supported Steps 1 Enter TCP IP Settings interface Configuration gt Basic Configuration gt Network gt TCP IP Or Configuration gt Advanced Configuration gt Network gt TCP IP TCPIIP Port NIC Type C DHeP IPv4 Address Pv4 Subnet Mask IPv 4 Default Gateway IPFv Mode View Route Advertisement IPv6 Address IPv6 Subnet Mask IPv6 Default Gateway Mac Address MTU Multicast Address
8. DNS Server Preferred DNS Server 6 6 0 8 Alternate DNS Server Save Figure 6 7 TCP IP Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 45 2 Configure the NIC settings including the IPv4 IPv6 Address IPv4 IPv6 Subnet Mask and IPv4 IPv6 Default Gateway 3 Click ecu to save the above settings Notes Ifthe DHCP server is available you can check L DHCP to automatically obtain an IP address and other network settings from that server The valid value range of Maximum Transmission Unit MTU is 500 9676 The default value is 1500 The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address Before utilizing this function you have to enable the Multicast function of your router and configure the gateway of the network speed dome ifthe DNS server settings are required for some applications e g sending email you should properly configure the Preferred DNS Server and Alternate DNS server DNS Server Preferred DNS Server 0 0 0 0 Alternate DNS Server Figure 6 8 DNS Server Settings Note The router must support the route advertisement function if you select Route Advertisement as the IPv6 mode 6 3 2 Configuring Port Settings Purpose If there is a router and you want to access the speed dome through Wide Area
9. clips and pictures 3 Click aor to save the settings 6 2 Configuring Time Settings Purpose You can follow the instructions in this section to configure the time which can be displayed on the video There are Time Zone Time Synchronization Daylight Saving Time DST functions for setting the time Time Synchronization consists of auto mode by Network Time Protocol NTP server and manual mode To enter the Time Settings interface Configuration gt Basic Configuration gt System gt Time Settings Or Configuration gt Advanced Configuration gt System gt Time Settings HE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 42 Device Information Time Settings Maintenance Time Zone GMT 08 00 Beijing Urumqi Singapore Time Sync E NIP Server Address NTP Port Interval min Manual Time Sync Device Time Set Time 2012 10 30T21 51 01 E Sync with computer time Figure 6 2 Time Settings Configuring Time Synchronization by NTP Server 1 Check the checkbox to enable the NTP function 2 Configure the following settings Server Address IP address of NTP server NTP Port Port of NTP server 123 by default Interval The time interval between the two synchronizing actions by NTP server It can be set from 1 to 10080 minutes Time Sync Server Address NTF Port Interval 0 min Figure 6 3 Time Sync by NTP Server Note If the speed dome is
10. configure the scheduled recording By default the record files of scheduled recording are stored in the SD card if supported or in the network disk Steps 1 Enter the Record Schedule Settings interface Configuration gt Advanced Configuration gt Storage gt Record Schedule GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Pre tecord Post record 5g ye Overwrite Yes Ww Enable Record Schedule E Norma WM Motion Detection Alarm Mi Motion Alarm Motion amp Alarm BW Other Figure 7 5 Recording Schedule Interface 2 Check the checkbox of Enable Record Schedule to enable scheduled recording 3 Set the record parameters of the speed dome Pre record 5s B Post record 5s Figure 7 6 Record Parameters Pre record The time you set to start recording before the scheduled time or the event For example if an alarm triggers recording at 10 00 and the pre record time is set as 5 seconds the speed dome starts to record at 9 59 55 The Pre record time can be configured as No Pre record 5 s 10 s 15 s 20 s 25 s 30s or not limited Note The pre record time changes according to the video bitrate Post record The time you set to stop recording after the scheduled time or the event For example if an alarm triggered recording ends at 11 00 and the post record time is set as 5 seconds the speed dome records until 11 00 05 The Post record time ca
11. 5 2 Configuring OSD Settings a sinvseansnavecusajnscovswscaneyaeacsieeravsenssuens auranseamsesmneencarsnetouarnecaweeads 66 6 5 3 Configuring Text Overlay Settings cccccsecceecceeeesecseeeeeeeeeeesecesceeeeceeeseeeeeeeeeeeeeeeeees 68 6 6 CONS UG and Handling Alar MS sriercseneniine AD 68 6 6 1 Configuring Motion Detection ssessessesseesessesersersessessessrsrrsrrsrrsresersersessessessrsresersers 69 6 6 2 Configuring Video Loss Alarm svssaussnzsceussiodanwcannvastnesnesamepenteawerasacsnatsedinendscaswenteodeaseeaxsesuads 72 6 6 3 Configuring Tamper proof Alarim ccccsecceeccseccseceecceeecseceeeeesceeseeeeeceeeeeeesseeeseeaseeeeees 73 6 6 4 Configuring External Alarm Input cccceeccsecceeccsecseeceeceeceeeeeeseeeueceeeseeeseeeeeeeeeeeeeees 74 6 6 5 Configuring Alarm OUTPUT sivisssihaswnnewndvidomondeisaessanebaannasnhoaendessoproconsornsiitevsaeeiuatreereateeaes 76 666 Handilin ECeEDIOM eenia so vecewseaceupat orncvuaesaaanaies veseuesmeenetenencsordsarecoresanctenees 77 Chapter 7 Record Setting S esscr rrna eraren E EEEE ests cennaueseeeueeerees 79 7 1 Contiguring NAS Setting Ssss cosemsnnwinadrrananennnemnnamenisenannetinaseenntnenonpionneensipeetsesbeceteceincensabiacss 79 7 2 Configuring Recording SCHECUIC ccccccssccseccsecceecencceecceeecueceeeeeeaeeeseeeeeeeeceeseeeseeeeeaes 80 7 3 Configuring Snapshot SettingS cccccseccssccseccseececcescceucceucceecseeeeeeeseceeesseeescesseeeeee
12. Control Panel GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 20 View Tool Help iVMS 4200 PCNVR d i CPU Playback ka E map SY Configuration 14 46 42 Mataroni Default View L 1 Screen E 4 Screen E 9 Screen E 16 Screen EA Customize View E New View Figure 3 7 iVMS 4200 PCNVR Live View Interface Notes If you use third party VMS software please contact technical support of our branch for camera firmware For detailed information about client software of our company please refer to the user manual of the software This manual mainly introduces accessing to the network speed dome by web browser ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 71 Chapter 4 Live View 4 1 Power up Action After the power is applied the speed dome will perform self test actions It begins with lens actions and then pan and tilt movement After the power up self test actions the information as shown in Figure 4 1 will be displayed on screen for 40 seconds The System Information displayed on the screen includes the dome model address protocol version and other information The COMMUNICATION refers to the baud rate parity data bit and stop bit of the dome e g 2400 N 8 1 indicates the dome is configured with the baud rate of 2400 no parity 8 data bits and 1 stop bit Model XX 2XXXXXK X
13. Fixed Region 4 Click raw Area and draw a red frame in the live view image 5 Adjust the Enhance the level from 1 to 6 The higher the value the better image quality in the red frame 6 Enter a Region Name and click Save to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 59 Video Audio ROI m a Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 lt Stream Type Stream Type Main Stream Normal _ vi Fixed Region C Enable Region No E vi Enhance the level 3 Region Name Dynamic Tracking C Enable Enhance the level 6 v Save Figure 6 26 Region of Interest Dynamic Tracking The center area of the tracking scene is specified ROI function by default When the speed dome starts smart tracking the quality in the image center is enhanced Steps 1 Check the check box of Enable under Dynamic Tracking 2 Adjust the Enhance the level from 1 to 6 The higher the value the better the ROI quality 3 Click Save to save the settings 6 5 Configuring Image Settings 6 5 1 Configuring Display Settings Purpose You can set the image quality of the speed dome including brightness contrast saturation sharpness etc ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Notes The parameters in Display Setti
14. Ltd All Rights Reserved User Manual of Network Speed Dome 7 BO Roga SOE eE EE E E EA 100 APPONI sriirirneinirerii niron ET TT E 101 Appendix 1 SADP Software Introduction ccccssccseccseccsecseecseecseccseceueceusceussseesaeetseceseceseceueees 101 Appendik 2 Part Map PINE esaeraren E EEE 103 GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 8 Chapter 1 Overview 1 1 System Requirement System requirement of web browser accessing is as follows Operating System Microsoft Windows XP SP1 and above version Vista Win7 Server 2003 Server 2008 32bits CPU Intel Pentium IV 3 0 GHz or higher RAM 1G or higher Display 1024x768 resolution or higher Web Browser Internet Explorer 7 0 and above version Apple Safari 5 02 and above version Mozilla Firefox 3 5 and above version and Google Chrome8 and above versions 1 2 Appearance Figure 1 1 Appearance 1 3 Functions Note The functions vary depending on the models of speed dome Limit Stops The dome can be programmed to move within the limit stops left right up down Scan Modes The dome provides 5 scan modes auto scan tilt scan frame scan random scan and panorama scan Preset Freezing This feature freezes the scene on the monitor when the dome is moving to a preset ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 9 This allows for
15. User Manual of Network Speed Dome o 4 Click to finish drawing Note You can click _Y 23 4 l_ to clear all of the areas 5 Move the slider to set the sensitivity of the detection 2 Set the Arming Schedule for Motion Detection Steps 1 To edit the arming schedule as shown in Figure 6 42 click Edit in Figure 6 41 Arming Schedule Edit Figure 6 41 Arming Schedule 2 Choose the day you want to set the arming schedule as shown in Figure 6 42 3 Click to set the time period for the arming schedule 4 After you set the arming schedule you can click conv to copy the schedule to other days Optional 5 Click K to save the settings Note The time of each period can t be overlapped Up to 4 periods can be configured for each day GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 71 Edit Schedule Time Mon Tue Wed Thu Fri Sat Sun Period Start Time End Time 1 00 00 sk 24 00 AN 2 00 00 z 00 00 5k 3 00 00 t 00 00 zL 4 00 00 00 00 A opy to Week C Select al seeeeeeeee Mon C Tue LI Wed CJ Thu O fri LI sat LI Sun OK Cancel Figure 6 42 Arming Time Schedule 3 Setthe Alarm Actions for Motion Detection Purpose You can specify the linkage method when an event occurs The following contents are about how to configure the different types of linkage method Linkage Method Normal Linkage Notify Surveillance Center
16. address configuration of the speed dome 3 Save the static IP in the router 4 Set port mapping E g 80 8000 and 554 ports The steps for port mapping vary depending on different routers Please call the router manufacturer for assistance with port mapping Note Refer to Appendix 2 for detailed information about port mapping 5 Visit the network speed dome through a web browser or the client software over the internet GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 14 i Network i Internet Network i Cabe Q Cable i i i com puter Speed Dome Router with Static IP Figure 2 4 Accessing the Speed Dome through Router with Static IP e Connecting the network speed dome with static IP directly You can also save the static IP in the speed dome and directly connect it to the internet without using a router Refer to Section 2 1 2 Detecting and Changing the IP Address for detailed IP address configuration of the speed dome Network O _ Network Internet wN Cable N pe P Cable Computer wow Speed Dome Figure 2 5 Accessing the Speed Dome with Static IP Directly 2 2 2 Dynamic IP Connection Before you start Please apply a dynamic IP from an ISP With the dynamic IP address you can connect the network speed dome to a modem or a router Connecting the network speed dome via a router Steps 1 Connect the network speed do
17. as a JPEG file in your computer 4 5 Operating PTZ Control Purpose In the live view interface you can use the PTZ control buttons to control panning tilting and zooming GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 25 4 5 1 PTZ Control Panel On the live view page click I to show the PTZ control panel or click x to hide it Click the direction buttons to control the pan tilt movements Click the zoom iris focus buttons to realize lens control Fav H 40 SE SE oa b va OO O e tlie nie Figure 4 4 PTZ Control Panel Table 4 2 Descriptions of PTZ Control Panel es bem ee 4 4 a Adjust speed of pan tilt movements 4 5 2 Setting Calling a Preset Purpose A preset is a predefined image position For the defined preset you can click the calling button to quickly view the desired image position Setting a Preset Steps 1 Inthe PTZ control panel select a preset number from the preset list is Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 26 3 4 Figure 4 5 Setting a Preset Use the PTZ control buttons to move the lens to the desired position e Pan the speed dome to the right or left e Tilt the speed dome up or down e Zoom in or out e Refocus the lens Cli
18. connected to a public network you should use a NTP server that has a time synchronization function such as the server at the National Time Center IP Address 210 72 145 44 If the speed dome is set in a customized network NTP software can be used to establish a NTP server for time synchronization Configuring Time Synchronization Manually 1 Check the Manual Time Sync checkbox GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 43 2 Click toset the system time from the pop up calendar 3 Click ecu to save the settings Note You can also check the Sync with computer time checkbox to synchronize the time of the speed dome with the time of your computer 4 4 Feb 2013 gt Sun Mon Tue Wed Thu Fri Sat 1 SIRE 10 11 12 13 14 15 16 17 18 19 20 2 2 23 Manual Time Sync m4 25 26 27 2 Device Time Time 14 24 10 P e Set Time 2012 06 25T21 14 03 Sync with computer time Figure 6 4 Time Sync Manually Select the Time Zone Purpose When the speed dome is taken to another time zone you can use the Time Zone function to adjust the time The time will be adjusted according to the original time and the time difference between the two time zones From the Time Zone drop down menu as shown in Figure 6 5 select the Time Zone in which the speed dome locates Device Information Time Settings Maintenance Time Zone MT 0 7 00
19. gt Advanced Configuration gt PTZ gt Initial Position Basic Limit Initial Position ParkAction PrivacyMask Scheduled Tasks Clear Config Smart Tracking t 4 4 i gt 2 oa Oo O MP Preset 1 Preset2 Preset 3 Preset4 Preset5 lt Set Figure 5 1 PTZ Configuration 2 Click the PTZ control buttons to find a position as the initial position of the dome you can also call a defined preset and set it as the initial position of the dome 3 Click Set to save the position e Call delete an Initial Position You can click Galo to call the initial position You can click to delete the initial position and restore the factory default initial position ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 32 5 2 Configuring Basic PTZ Parameters Purpose You can configure the basic PTZ parameters including proportional pan preset freezing preset speed etc 1 Enter the Basic PTZ Parameter Configuration interface Configuration gt Advanced Configuration gt PTZ gt Basic Basic Limit Initial Position Park Action Privacy Mask Scheduled Tasks Clear Config Smart Tracking Basic Parameter Enable Proportional Pan Enable Preset Freezing Preset Speed Keyboard Control Speed Auto Scan Speed PTZ OSD oom Status PT Status Preset Status 25 w Power Off Memory Set Resume Time Point 30s w Save Figure 5 2 Basic PTZ Configuration I
20. patterns can be operated separately and with no priority level e When configuring and calling the pattern proportional pan is valid the limit stops and auto flip will be invalid and the 3D positioning operation is not supported 4 6 Configuring Live View Parameters Main stream Sub stream Third stream ae bare selec Main SET sub Stream or Third Stream as the stream type of live viewing The main stream is with a relatively high resolution and needs much bandwidth The sub stream is with a low resolution and needs less bandwidth The resolution of third stream is between that of main stream and sub stream The default setting of stream type is Main Sirgam Note Please refer to Section 6 4 1 Configuring Video Settings for more detailed parameter settings of the main stream sub stream and third stream respectively Image Size 16 9 0 HF You can scale up down the live view image by clicking the image size can be 4 3 16 9 original or auto GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Chapter 5 PTZ Configuration 5 1 Configuring Initial Position Purpose The initial position is the origin of PTZ coordinates It can be the factory default initial position You can also customize the initial position according to your own demand Customize an Initial Position Steps 1 Enter the Initial Position Configuration interface Configuration
21. position to the center and allow the rectangle area to zoom out Proportional Pan Tilt Proportional pan tilt automatically reduces or increases the pan and tilt speeds according to the amount of zoom At telephoto zoom settings the pan and tilt speeds will be slower than at wide zoom settings This keeps the image from moving too fast on the live view image when there is a large amount of zoom Auto Focus The auto focus enables the camera to focus automatically to maintain clear video images Day Night Auto Switch The speed domes deliver color images during the day And as light diminishes at night the speed domes switch to night mode and deliver black and white images with high quality Slow Shutter In slow shutter mode the shutter speed will automatically slow down in low illumination conditions to maintain clear video images by extending the exposure time The feature can be enabled or disabled Backlight Compensation BLC GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 10 If you focus on an object against strong backlight the object will be too dark to be seen clearly The BLC Backlight Compensation function can compensate light to the object in the front to make it clear but this causes the over exposure of the background where the light is strong Wide Dynamic Range WDR The wide dynamic range WDR function helps the camera provide clear images even
22. proof checkbox to enable the tamper proof detection ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 74 3 Set the tamper proof area Refer to Step 1 Set the Motion Detection Area in Section 6 6 1 Configuring Motion Detection 4 Click atl to edit the arming schedule for tamper proof The arming schedule configuration is the same as the setting of the arming schedule for motion detection Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6 6 1 Configuring Motion Detection 5 Check the checkbox to select the linkage method taken for the tamper proof Notify surveillance center send email and trigger alarm output are selectable Please refer to Step 3 Set the Alarm Actions for Motion Detection in Section 6 6 1 Configuring Motion Detection 6 Click a to save the settings 6 6 4 Configuring External Alarm Input Steps 1 Enter the Alarm Input Settings interface Configuration gt Advanced Configuration gt Events gt Alarm Input 2 Choose the alarm input No and the Alarm Type The alarm type can be NO Normally Open and NC Normally Closed 3 Edit the name in SU Lt to seta name for the alarm input optional GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome hs Alarm Input No Alarm Name Alarm Type Arming Schedule 2 Di 2 4 6 i 10 12 l4 16 18 RA e OEE PEPE EEE EEE E
23. size and stream type of the live video 4 3 Starting Live View gt i In the live view window as shown in Figure 4 3 click on the toolbar to start the live view of the speed dome GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome pi a ee eat F j ah i mrg y ii free G pii e grm i Figure 4 3 Start Live View Table 4 1 Descriptions of the Toolbar icon Description icon Description oe a Manual recording off a Manual recording on sss Audio on and adjust volume Two way audio of 3D positioning Manual tracking Note Before using the two way audio or recording with audio functions please set the Stream Type to Video amp Audio referring to Section 6 4 1 Configuring Video Settings Full screen Mode You can double click on the live video to switch the current live view into full screen or return to normal mode from the full screen 3D Positioning Steps 1 Click kes on the tool bar of live view interface 2 Operate the 3D positioning function Left click a position of the live video The corresponding position will be moved to the center of the live video Hold down the left mouse button and drag the mouse to the lower right on E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 24 the live video The corresponding position will be moved to the center of the live video and zoomed
24. smooth transition from one preset scene to another It also guarantees that masked area will not be revealed when the dome is moving to a preset Presets A preset is a predefined image position When the preset is called the dome will automatically move to the defined position The presets can be added modified deleted and called Label Display The on screen label of the preset title azimuth elevation zoom time and dome name can be displayed on the monitor The displays of time and speed dome name can be programmed Auto Flips In manual tracking mode when a target object goes directly beneath the dome the video will automatically flips 180 degrees in horizontal direction to maintain continuity of tracking This function can also be realized by auto mirror image depending on different camera models Privacy Mask This function allows you to block or mask certain area of a scene for preventing the personal privacy from recording or live viewing A masked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide 3D Positioning In the client software use the left key of mouse to click on the desired position in the video image and drag a rectangle area in the lower right direction then the dome system will move the position to the center and allow the rectangle area to zoom in Use the left key of mouse to drag a rectangle area in the upper left direction to move the
25. the total number and information of the searched devices in the Online Devices interface Device information including the device type IP address and port number etc will be displayed i ices Refresh gt gt Total number of online devices 5 Modify Network Parameters Device Type IPv4 Address Port Software Version IPv4 Gateway Serial No IP Address HDDomeSeries 172 6 21 157 8000 V4 0 2build 120807 Port Subnet Mask IPv4 Gateway IPv6 Address IPv6 Gateway IPV6 Prefix Length Serial No m o Note Enter the admin password of the device before you save the network parameters Restore Default Password Confirm Note Serial code is a series of characters combined by the start time and the serial number of the device Figure A 1 1 Searching Online Devices Note Device can be searched and displayed in the list in 15 seconds after it went online it will be removed from the list in 45 seconds after it went offline Search online devices manually k w Refresh You can also clic to refresh the online device list manually The newly searched devices will be added to the list Note You can click or on each column heading to order the GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 102 information you can click to expand the device table and hide the lt lt network parameter panel on the rig
26. to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC Conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement C 3 This product and if applicable the supplied accessories too are marked with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 2011 65 EU N i 2012 19 EU WEEE directive Products marked with this symbol y cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier a upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery
27. under back light circumstances When there are both very bright and very dark areas simultaneously in the field of view WDR balances the brightness level of the whole image and provide clear images with details Note This feature varies depending on speed dome models White Balance WB White balance can remove the unrealistic color casts White balance is the white rendition function of the camera to adjust the color temperature according to the environment automatically Patrol A patrol is a memorized series of pre defined preset function The scanning speed between two presets and the dwell time at the preset are programmable Pattern A pattern is a memorized series of pan tilt zoom and preset functions By default the focus and iris are in auto status during the pattern is being memorized Power Off Memory The dome supports the power off memory capability with the predefined resume time It allows the dome to resume its previous position after power is restored Scheduled Task A time task is a preconfigured action that can be performed automatically at a specific date and time The programmable actions include auto scan random scan patrol 1 8 pattern 1 4 preset 1 8 frame scan panorama scan tilt scan day night reboot PT adjust Aux Output etc Park Action This feature allows the dome to start a predefined action automatically after a period of inactivity User Management The dome allows you to ed
28. 00000 2013 07 08 03 29 02 247 MB O T ch01_08000000110000000 2013 07 08 04 34 13 247 MB End Time d 6 ch01_08000000111000000 2013 07 08 05 52 44 247 MB F 7 ch01_08000000112000000 2013 07 08 08 03 29 248 MB 2013 07 8 23 59 59 LC 8 ch01_08000000113000000 2013 07 08 10 16 53 247 MB F 9 ch01_08000000114000000 2013 07 08 12 37 46 247 MB Q Search CL 10 ch01_08000000115000000 2013 07 08 14 57 46 247 MB F 11 ch01_08000000116000000 2013 07 08 15 31 46 49 MB E Download A 12 ch01_08000000116000100 2013 07 08 15 50 02 199 MB O 13 ch01_08000000117000000 2013 07 08 16 09 11 248 MB A 14 ch01_08000000118000000 2013 07 08 16 28 50 248 MB m 45 chn nennnnnn4asannnnnn 2N4142N7T_N2 41A A0 99 242 MA Total 23 tems FirstPage Prev Page 14 Next Page Last Page Figure 8 7 Video Downloading interface 3 Check the checkbox in front of the video files that you need to download 4 Click Download to download the video files Notes Progress The progress ratio MEM displays the downloading ratio of the video file You can click to stop the downloading Thetotalnumber otal32 Items displays the amount of the video files The video files are not all listed on one page You can click First Page Prev Page 1 2 Next Page Last Page to turn pages Task 3 To download the captured pictures Steps 1 Click E on the playback interface The pop up menu is shown in Figure 8 8 GE Hikvision Digital Technology Co Ltd All Rights Reserved
29. AST It s recommended to select the protocol type to GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Al when using the Multicast function For other information about Multicast refer to Section 6 3 1 Configuring TCP IP Settings Live View Performance Set the live view performance to Least Delay Balanced or Best Fluency Note Please set Live View Performance as Best Fluency for the high frame rate speed dome Rules You can enable or disable the rules of dynamic analysis for motion here Record File Settings Set the saving path of the video files Record File Size Select the packed size of manually recorded and downloaded video files The size can be set to 256M 512M or 1G Save record files to Set the saving path for the manually recorded video files Save downloaded files to Set the saving path for the downloaded video files Playback iN iNterface e Picture and Clip Settings Set the saving paths of the captured pictures and clipped video files Save snapshots in live view to Set the saving path of the manually captured Live View pictures in _ interface Save snapshots when playback to Set the saving path of the captured Playback pictures in EEE interface Save clips to Set the saving path of the clipped video files in Playback interface Note You can click to change the directory for saving video files
30. DNS PPPoE SNMP 802 1 QoS FTP NAT Email Enable IEEE 802 1 Protocal EAPOL version Password Po Figure 6 17 802 1X Settings 3 Check the Enable IEEE 802 1X checkbox to enable it 4 Configure the 802 1X settings including user name and password Note The EAP MD5 version must be identical with that of the router or the switch 5 Enter the user name and password issued by the CA to access the server 6 Click aor to finish the settings Note The camera reboots when you save the settings 7 After the configuration connect the camera to the protected network 6 3 7 Configuring QoS Settings Purpose QoS Quality of Service can help solve the network delay and network congestion by configuring the priority of data sending Steps 1 Enter the QoS Settings interface Configuration gt Advanced Configuration gt Network gt QoS GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 52 TCPAP Pot DDNS PPPoE SNMP 802 1X QoS FTP NAT Email Video Audio DSCP 0 Event Alarm DSCP 0 Management DSCP 0 Figure 6 18 QoS Settings 2 Configure the QoS settings including video audio DSCP event alarm DSCP and Management DSCP The valid DSCP value ranges from O to 63 The DSCP value is bigger the priority is higher 3 Click BEM to save the settings Notes Make sure that you enable the QoS function of you
31. Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Example When the speed domes are connected to the same router you can forward the ports of a speed dome as 80 8000 8200 8210 and 554 with IP address 192 168 1 23 and the ports of another speed dome as 81 8001 8201 8211 and 555 with IP 192 168 1 24 Refer to the steps as below Steps 1 As the settings mentioned above forward the port 80 8000 8200 8210 and 554 for the network speed dome at 192 168 1 23 2 Forward the port 81 8001 8201 8211 and 555 for the network speed dome at 192 168 1 24 3 Enable ALL or TCP protocols 4 Check the Enable checkbox and click L__Save__J 108M Wireless Router Virtual Servers Modal No TL WR641G TL WRE426 ID Service Port IP Address Protocol Enable 1 192 168 1023 ALL Basic Settings Advanced Settings 5 492 168 10 ALL Virtual Servers 6 192 168 10 24 ALL v Maintenance Common Service Port DNS 53 v Copy to ID Figure A 2 3 Port Mapping Note The port of the network speed dome cannot conflict with other ports For example some web management port of the router is 80 Change the speed dome port if it is the same as the management port ME Hikvision Digital Technology Co Ltd All Rights Reserved First Choice for Security Professionals HANGZHOU HIKVISION DIGITAL TECHNOLOGY CO LTD www hikvision com
32. E as its default network connection you can use the Dynamic DNS DDNS for network access Before you start Registration on the DDNS server is required before configuring the DDNS settings of the speed dome Steps HE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 47 1 Enter the DDNS Settings interface Configuration gt Advanced Configuration gt Network gt DDNS TCPAP Port DDNS PPPoE SNMP 802 1 QoS FIP NAT Email Enable DDNS DONS Type IPServer server Address fo OSOS Password fF E Confirm PO Save Figure 6 11 DDNS Settings 2 Check the Enable DDNS checkbox to enable this feature 3 Select DDNS Type Three DDNS types are selectable IPServer HiDDNS and DynDNS DynDNS Steps 1 Enter Server Address of DynDNS e g members dyndns org 2 In the Domain text field enter the domain name obtained from the DynDNS website 3 Enter the Port of DynDNS server 4 Enter the User Name and Password registered on the DynDNS website 5 Click on to save the settings TCPAP Port DDNS PPPoE SNMP 802 1 QoS FIP NAT Email Enable DONS DDNS Type Server Address members dyndns org Domain 23 dyndns org Password Confirm Save Figure 6 12 DynDNS Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 48 IP Server Steps 1 Enter the Serve
33. EE ry Me E T EEE TEEPE LTE PET LT me EE EE EE EE EE EEE EEE EE TET PEREPERE EE EEEE i EEEE EEEE EET EEE EE EEE EEE EEE EE REE REEN Figure 6 46 Alarm Input Settings 4 Click Edt to set the arming schedule for the alarm input Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6 6 1 Configuring Motion Detection 5 Check the checkbox to select the linkage method taken for the alarm input Refer to Step 3 Set the Alarm Actions for Motion Detection in Section 6 6 1 Configuring Motion Detection 6 You can also choose the PTZ linking for the alarm input Check the relative checkbox and select the No to enable Preset Calling Patrol Calling or Pattern Calling 7 You can copy your settings to other alarm inputs 8 Click MISAS to save the settings E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 76 Linkage Method Normal Linkage Other Linkage Notify Surveillance Center Trigger Alarm Output Select All Send Email JA 1 A 2 Upload to FTP PTZ Linking C Trigger Channel Preset No _ Patrol No Pattern Copy to Alarm 0 Select All As 1 Lla lt 2 L a 3 Llas 4 lass Llas 6 Lla 7 Figure 6 47 Linkage Method 6 6 5 Configuring Alarm Output Steps 1 Enter the Alarm Output Settings interface Configuration gt Advanced Configuration gt Events gt Alarm Output Select one alarm output channel in the Alarm Ou
34. For detailed information please refer to Section 6 3 1 Configuring TCP IP Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 13 i ices Refresh gt gt Total number of online devices 5 Modify Network Parameters ID Device Type IPv4 Address Port Software Version IPv4 Gateway Serial No IP Address 001 HDDomeSeries 172 6 21 157 8000 V4 0 2build 120807 Port Subnet Mask IPv4 Gateway IPv6 Address IPv6 Gateway IPv6 Prefix Length Serial No Q Note Enter the admin password of the device before you save the network parameters Restore Default Password Note Serial code is a series of characters combined by the start time and the serial ber of the device Figure 2 3 SADP Interface 2 2 Setting the Network Speed Dome over the WAN Purpose This section explains how to connect the network speed dome to the WAN with a static IP or a dynamic IP 2 2 1 Static IP Connection Before you start Please apply a static IP from an ISP Internet Service Provider With the static IP address you can connect the network speed dome via a router or connect it to the WAN directly Connecting the network speed dome via a router Steps 1 Connect the network speed dome to the router 2 Assign a LAN IP address the subnet mask and the gateway Refer to Section 2 1 2 Detecting and Changing the IP Address for detailed IP
35. IR light you can enter the OSD menu by calling the special preset 95 Chroma Suppress The Chroma Suppress level ranges from 0 to 100 as shown in Figure 6 36 Chroma Suppress es o a E ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 66 Figure 6 36 Chroma Suppress Note This function varies depending on the models of speed dome HLC HLC High Light Compensation makes the camera identify and suppress the strong light sources that usually flare across a scene This makes it possible to see the detail of the image that would normally be hidden Local Output You can select the output mode to ON or OFF 6 5 2 Configuring OSD Settings Purpose The speed dome supports following on screen displays Zoom Identifies the amount of magnification Direction Displays panning and tilting direction with the format of PXXX TXXX The XXX following P indicates the degrees in pan direction while the XXX following T indicates the degrees in tilt position Time Supports for time display Preset Title Identifies preset being called Camera Name Identifies the name of speed dome You can customize the on screen display of time Steps 1 Enter the OSD Settings interface Configuration gt Advanced Configuration gt Image gt OSD Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 6 Display Settings OSD Settin
36. Network WAN you need to forward the 3 ports for the speed dome Steps 1 Enter the Port Settings interface Configuration gt Basic Configuration gt Network gt Port Or Configuration gt Advanced Configuration gt Network gt Port TCPIHF Port RTSP Port Server Port 8000 Figure 6 9 Port Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 46 2 Set the HTTP port RTSP port and port of the speed dome HTTP Port The default port number is 80 RTSP Port The default port number is 554 HTTPS Port The default port number is 443 SDK Port The default port number is 8000 3 Click EME to save the settings 6 3 3 Configuring PPPoE Settings Purpose If you have no router but only a modem you can use Point to Point Protocol over Ethernet PPPoE function Steps 1 Enter the PPPoE Settings interface Configuration gt Advanced Configuration gt Network gt PPPoE TCPAP Port DONS PPPoE SNMP 802 71X QoS FIP NAT Email Enable PPPoE Dynamic IP ooo amp Password fo Confirm Save Figure 6 10 PPPoE Settings 2 Check the Enable PPPoE checkbox to enable this feature 3 Enter User Name Password and Confirm password for PPPoE access Note The User Name and Password should be assigned by your ISP 4 Click BEA to save and exit the interface 6 3 4 Configuring DDNS Settings Purpose If your speed dome is set to use PPPo
37. Rights Reserved User Manual of Network Speed Dome 64 Note This function varies depending on the models of speed dome Slow Shutter This function can be used in underexposure condition It lengthens the shutter time to ensure full exposure The slow shutter value can be set to Low Normal and High Slow Shutter Slow Shutter Level Figure 6 33 Slow Shutter Lens Initialization The lens operates the movements for initialization when you check the check box of Lens Initialization BLC If there s a bright backlight the subject in front of the backlight appears silhouetted or dark Enabling BLC back light compensation function can correct the exposure of the subject But the backlight environment is washed out to white White Balance The White Balance mode can be set to Auto MWB Outdoor Indoor Fluorescent Lamp Sodium Lamp and Auto Track Auto In Auto mode the camera retains color balance automatically according to the current color temperature Manual White Balance In MWB mode you can adjust the color temperature manually to meet your own demand as shown in Figure 6 34 WB Gain Circuit R WEB Gain Circuit B Figure 6 34 Manual White Balance Outdoor You can select this mode when the speed dome is installed in outdoor environment Indoor You can select this mode when the speed dome is installed in indoor environment Fluorescent Lamp You can select this mode when there are fluoresce
38. adjusted automatically according to the brightness of the environment Exposure Mode Ins Priority Iris F6 4 Figure 6 28 Manual Iris Shutter Priority The value of shutter needs to be adjusted manually The iris and gain values will be adjusted automatically according to the brightness of the environment Shutter 1 25 7 Figure 6 29 Manual Shutter Gain Priority The value of gain needs to be adjusted manually The shutter and iris values will be adjusted automatically according to the brightness of the environment Figure 6 30 Manual Gain Manual In Manual mode you can adjust the values of Gain Shutter Iris manually Note This function varies depending on the models of speed dome Smart IR If the IR light is on and the image center is overexposure you can enable this function Video Standard You can set the Video Standard to 50hz PAL or 60hz NTSC according to the video system in your country Note This function varies depending on the models of speed dome Day Night Switch The Day Night Switch mode can be set to Auto Day and Night HE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 63 Auto In Auto mode the day mode and night mode can switch automatically according to the light condition of environment The switching sensitivity can be set to Low Normal High Day Night Switch Auto Sensitivity Normal Figure 6 31 Auto Mode Sensit
39. ae Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 lt C Enable Smart Tracking Duration 20 second Save Figure 5 12 Configure Smart Tracking E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 39 Check the L Enable smart Tracking check box to enable smart tracking function 3 Click the PTZ buttons to select an object 4 Click gt t vom Ratio to set the current zoom ratio as the tracking zoom ratio 5 Set the tracking duration The speed dome stops tracking when the duration time is up The duration ranges from O to 300 seconds Notes Setting the duration to O means that there s no duration when speed dome tracks Not all the speed dome models support this function Please take the browser interface of the actual product as standard 5 8 Clearing PTZ Configurations Purpose You can clear PTZ configurations in this interface including all presets patrols patterns privacy masks PTZ limits and scheduled tasks Steps 1 Enter the Clearing Configuration interface Configuration gt Advanced Configuration gt PTZ gt Clear Config 2 Check the checkbox of the items you want to clear 3 Click none to clear the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 40 Chapter 6 Speed Dome Configuration 6 1 Configuring Local Parameters Note The local configur
40. aes 31 5 2 Configuring Basic PTZ Parameters ccesccsssoscsssccssccssessceusccusccescosssevetessessscusecsseoessosesess 32 5 5 CONTISULIAG PTZ Emit SEODS iwiscsinavisadininonanewcnnsesecamigsnon anes edonaniuinescousndenseucavedeeatiantseiteendsenseen 33 5 4 Configuring Scheduled TASKS asosdtecsvacindaneusiiouicWardncontieis ods dciebnsaisiedusid Seni rieren anena 34 5 5 COMMUNE Park ACE ONS icascssatetnassniee dann neonne iaio EEES 36 5 6 Configuring Privacy MaSk ssessssseseeseesesseseereoseescsscsscseeseoseossoseoseoreseesroseeseesesscseceresreseesee 37 5 7 Contie ring Smart Tracking csicsincwinasensnenenonanwnsawanieenannnsinasexantmcnonnatonsseevereisesbapatsceiacenncshawss 38 5 8 Clearing PIZ Config rations ssisiiisisesssssssesinisireorsriininiodes sestir nS EEDE EER i 39 Chapter 6 Speed Dome Configuration essssesseseoseseoseseosesececsesecseceoseceoseceosecesseceoseceesecesseceesese 40 6 1 Configuring Local PAPANVOUENS sasctavuiuctendsmecidsuctusdasuwasicdaveouebisnletusidteaietueduseucandunencesancoareaiiwesdies 40 6 2 Conheuringe Time SCMINGS sacs iatcsdissniesosmensgednncesodenncaspsdasendeanimenigedaaaotaeusendasseeeedaaebeadtauseeeees 41 6 3 Configuring Network SettingS cccscccssccseccsecceeeeeccsscceucceuecsecsseeeeeeeseeeeseeeeueeeseeeeeeeeeeaes 44 GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 6 6 3 1 Configuring TCP IP Settings vic sciissnsscuann Gea
41. ation refers to the parameters of the live view and other operations using the web browser Steps 1 Enter the Local Configuration interface Configuration gt Local Configuration Local Configuration Live View Parameters Protocol TCP O UDP MULTICAST Live View Performance Least Delay Balanced Best Fluency Rules Enable Disable Record File Settings Record File Size 256M 512M O 1G Save record files to C Documents and Settings shoujieyu Web RecordFiles Save downloaded files to C Documents and Settings shoujieyu Web DownloadFiles Picture and Clip Settings Save snapshots in live view to C Documents and Settings shoujieyu Web CaptureFiles Save snapshots when playback to C Documents and Settings shoujieyu Web PlaybackPics Save clips to C Documents and Settings shoujieyu Web PlaybackFiles Figure 6 1 Local Configuration Interface 2 Configure the following settings HTTP Browse Browse Browse Browse Browse Live View Parameters Set the protocol type stream type image size and live view performance Protocol Type TCP UDP MULTICAST and HTTP are selectable TCP Ensures complete delivery of streaming data and better video quality yet the real time transmission will be affected UDP Provides real time audio and video streams HTTP Allows the same quality as of TCP without setting specific ports for streaming under some network environments MULTIC
42. ceeseeeeeceeeeeeeeeeeeeeeeeeeeeees 12 2 2 Setting the Network Speed Dome over the WAN ccsccssecesecceeeeecceeceeeceeeeeuceseeeesceeeeeees 13 AAL StAtiC IP COMMCCH ON erriren a ERTER AR 13 222 Dynamic IF CONNeCHO esias EEE E EEA 14 Chapter 3 Access to the Network Speed DOMe s esessesessecesseceosecececsececsececsececseceosececsececsececeee 17 3 1 Accessing by Web Browsers sssssssssessrsrrseesessessessrsresresersersrrseeseoseserseeserseosessrsseserseesees 17 3 2 Accessing DY Cent SOP W ANC esnai e a EEE 19 Chapter 4 LVE VIEW ossi A os decececnsansceeeeeutieee 21 4 1 POWE UD ACTON coador A A a 21 4 2 UVE VIEW PI G r T O E A 21 4 3 Starine LIVE VIEW acs cecertsaitremarneciaocmesans gente peeauianreo E E EEE 22 4 4 Recording and Capturing Pictures Manually c ccccsccscceeeceecceeceeecesceeseeeeeeseeeseeeeeeaaees 24 4 5 Operatine PIZ CONTO seeiis e se ainsi E EE 24 ASL PIZ CONTO Panel sorosiane EE OARA 25 rs Ww Senne Ciline Prece Ce ee cn r A ee 25 45 3 Settine Calling a Pa Olesin ann a EEE EAR 27 ASA Seine 7 Calling a Patel Mecer E E O 29 4 6 Configuring Live View ParaMetelrs cccccceeccseccseccscceccseccsceesceaueceucceceseeeseeeueeeeeeeseeeeenees 30 Chapter 5 PTZ Configuration ssesessesessecessecessececsecsosececsecessececsececsececeoseceoseceosesecseseoseceoseseoees 31 5 1 Configuring Initial Position ccccccseccsecceecceecceeeeeeeesecsueceuccseeseeeseeceeesseeeeeeeenseeeeeeeeee
43. ck to finish the setting of the current preset You can click to delete the preset Note You can configure up to 256 presets Calling a Preset In the PTZ control panel select a defined preset from the list and click to call the preset iS DE Preset 1 Preset Preset 3 Preset 4 Preset 4 Preset 6 Preset Preset 8 Preset 4 Preset 10 E ee Figure 4 6 Calling a Preset Note The following presets are predefined with special commands You can only call them but not configure them For instance preset 99 is the Start auto scan If you call the preset 99 the speed dome starts auto scan function Table 4 3 Special Presets mel Preset Preset Call patrol 1 Call OSD menu 36 Callpatrol2 96 Stopascan 38 Callpatrol4 8 Startframescan 39 IReutfilterin 99 Startautoscan GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 27 Call pattern 1 101 Call pattern 2 102 Call patrol 5 Call pattern 3 103 Call patrol 6 a4 Call pattern 4 104 Call patrol 7 105 Call patrol 8 Note You may need to use the OSD On Screen Display menu when controlling the speed dome remotely To display the OSD menu on the live view screen you can call the preset number 95 4 5 3 Setting Calling a Patrol Purpose A patrol is a memorized series of preset function It can be configured and called on the patrol settings interfac
44. cy Mask 1 yellow v Yes 1 2 Privacy Mask 2 red Yes 1 Save Figure 5 9 Draw the Privacy Mask 2 Click the PTZ control buttons to find the area you want to set the privacy mask Click Draw Area click and drag the mouse in the live video window to draw the area 4 You can drag the corners of the red rectangle area to draw a polygon mask 5 Click to finish drawing or click lear All to clear all of the areas you set without saving them 6 Click to save the privacy mask and it will be listed in the Privacy Mask List area you can select a mask and click Delete to delete it from the list ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 3g 0 you can also define the color of the masks No Name Type Enable 1 Privacy Mask 1 gray B Yes 2 Privacy Mask 2 gray Yes Figure 5 10 Privacy Mask List Figure 5 11 Define Mask Color 7 Check the checkbox of Enable Privacy Mask to enable this function Note You are allowed to draw up to 24 areas on the same image 5 7 Configuring Smart Tracking Purpose The speed dome tracks the moving objects automatically after you configure this function Steps 1 Enter the Smart Tracking Settings interface Configuration gt Advanced Configuration gt PTZ gt Smart Tracking Basic Limit Initial Position Park Action Privacy Mask Scheduled Tasks Clear Config Smart Tracking A G D oa IL
45. d light between parts of an image The value ranges from 0 to 100 Saturation This feature is used to adjust color saturation of the image The value ranges from 0 to 100 Limit Gain This feature is used to adjust gain of the image The value ranges from O to 100 Sharpness Sharpness function enhances the detail of the image by sharpening the edges in the image The value ranges from O to 100 Note This function varies depending on the models of speed dome Focus Mode The Focus Mode can be set to Auto Manual Semi auto Auto The speed dome focuses automatically at any time according to objects in the scene Semi auto The speed dome focuses automatically only once after panning tilting and zooming Manual m E In Manual mode you need to use on the control panel to focus manually Min Focus Distance This function is used to limit the minimum focus distance The value can be set to 1 5m 3m 6m 10cm and 50cm Note The minimum focus value varies depending on the models of speed dome GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 62 Exposure Mode The Exposure Mode can be set to Auto Iris Priority Shutter Priority Manual Auto The iris shutter and gain values will be adjusted automatically according to the brightness of the environment Iris Priority The value of iris needs to be adjusted manually The shutter and gain values will be
46. directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 3 Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss The precaution measure is divided into Warnings and Cautions Warnings Serious injury or death may be caused if any of these warnings are neglected Cautions Injury or equipment damage may be caused if any of these cautions are neglected Warnings Follow these safeguards to Cautions Follow these precautions to prevent serious injury or death prevent potential injury or material damage A Please adopt the power adapter which can meet the safety extra low voltage SELV standard And source with 24VAC 10 or 12VDC 10 depending on models according to the IEC60950 1 and Limited Power Source standard The power consumption cannot be less than the required value Do not connect several devices to one power adapte
47. ds to the higher video quality but the higher bandwidth is required Video Encoding The Video Encoding standard can be set to H 264 or MJPEG Profile You can set the profile level to High Profile Main Profile or Basic Profile Frame Interval Set the I Frame interval from 1 to 400 4 Click BELL to save the settings 6 4 2 Configuring Audio Settings Steps 1 Enter the Audio Settings interface Configuration gt Basic Configuration gt Video Audio gt Audio Or Configuration gt Advanced Configuration gt Video Audio gt Audio Video Audio Audio Encoding G_f11ulaw G_f11ulaw G T1alaw Figure 6 25 Audio Settings 2 Configure the following settings E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 58 Audio Encoding G 711ulaw G 711alaw and G 726 selectable 3 Click to save the settings 6 4 3 Configuring ROI Settings Before you start ROI Region of Interest encoding is used to enhance the quality of images which are specified in advance Stream Type You can set the ROI function for main stream sub stream or third stream Select a stream type and then configure the ROI settings Fixed Region Draw several fixed areas and apply the ROI function on them Steps 1 Enter the ROI Settings interface Configuration gt Advanced Configuration gt Video Audio gt ROI 2 Select a Region No 3 Check the check box of Enable under
48. e There are up to 8 patrols for customizing A patrol can be configured with 32 presets Before you start Please make sure that the presets you want to add into a patrol have been defined Setting a Patrol Steps i 1 Inthe PTZ control panel click to enter the patrol settings interface 2 Select a patrol number from Path 01 lama 3 Click ow to enter the adding interface of preset as shown in Figure 4 7 Patrol Preset DESK Patrol duration 4 Patrol Speed 41 OK Cancel Figure 4 7 Adding Presets 4 Configure the preset number patrol duration and patrol speed GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 28 Name Description S It is the duration staying on one patrol point The speed Patrol Duration dome moves to another patrol point after the patrol time Patrol Speed It is the speed of moving from one preset to another 5 Click es to save a preset into the patrol 6 Repeat the steps from 3 to 5 to add more presets 7 Click to save all the patrol settings Calling a Patrol In the PTZ control panel select a defined patrol from Path 01 e and click D to call the patrol as shown in Figure 4 8 1 Preseti dis 1 2 Preset 15 1 Figure 4 8 Calling a Preset Buttons on the Patrols interface Buttons Description O B Saveapatrol S B Stopapatroh Deletea preset Delete all the presets in one patr
49. e HDD Settings interface Advanced Configuration gt Storage gt Storage Management in which you can view the capacity free space status type and property of the disk 2 If the status of the disk is Uninitialized as shown in Figure 7 2 check the corresponding checkbox to select the disk and click to start initializing the disk HE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 8 amp 0 HDD Device List Format WE HDD No Capacity Free space Status Type Property Progress 7 9 0 96GB 0 00GB NAS R W Figure 7 2 Initialize Disk HDD Device List HDD No Capacity Free space Status Type Property Progress 9 39 06GB 0 00GB Uninitialized NAS R W Figure 7 3 Initializing When the initialization completed the status of disk will become Normal as shown in Figure 7 4 HDD Device List Format HDD No Capacity Free space Status Type Property Progress lo 39 06GB 38 75GB NAS RIW Figure 7 4 View Disk Status Notes Upto 8 NAS disks can be connected to the speed dome To initialize and use the SD card after insert it to the speed dome please refer to the steps of NAS disk initialization 7 2 Configuring Recording Schedule Purpose There are two kinds of recording for the speed domes manual recording and scheduled recording For the manual recording refer to Section 4 4 Recording and Capturing Pictures Manually In this section you can follow the instructions to
50. e panning and tilting as 2 seconds 5 seconds 10 seconds Always Close or Always Open Preset Status Set the preset name display duration while calling the preset as 2 seconds 5 seconds 10 seconds Always Close or Always Open e Power off Memory The dome can resume its previous PTZ status or actions after it restarted from a power off You can set the time point of which the dome resumes its PTZ status You can set it to resume the status of 30 seconds 60 seconds 300 seconds or 600 seconds before power off 3 Click ELE to save the settings 5 3 Configuring PTZ Limit Stops Purpose The dome can be programmed to move within the configurable limit stops left right up down Steps 1 Enter the Limit Configuration interface Configuration gt Advanced Configuration gt PTZ gt Limit Basic Limit Initial Position ParkAction Privacy Mask Scheduled Tasks Clear Config Smart Tracking 4 1 0 I ja QOQ OQ A a a gt Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 gt u Enable Limit Limit Type Manual Stops v Type Status Set Figure 5 3 Configure the PTZ Limit 2 Click the checkbox of Enable Limit and choose the limit type as manual stops or scan stops Manual Stops ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 34 When manual limit stops are set you can operate the PTZ control panel manually only i
51. edium Frame Rate 25 Max Bitrate 6144 Kbps Video Encoding H 264 e Profile High Profile Frame Interval 25 Figure 6 24 Configure Video Settings 2 Select the Stream Type of the speed dome to main stream normal sub stream or third stream The main stream is usually for recording and live viewing with good bandwidth and the sub stream can be used for live viewing when the bandwidth is limited Refer to the Section 6 1 Configuring Local Parameters for switching the main stream and sub stream for live viewing 3 You can customize the following parameters for the selected main stream or GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 57 Sub stream Video Type Select the stream type to video stream or video amp audio composite stream The audio signal will be recorded only when the Video Type is Video amp Audio Resolution Select the resolution of the video output Bitrate Type Select the bitrate type to constant or variable Video Quality When bitrate type is selected as Variable 6 levels of video quality are selectable Frame Rate The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second fps A higher frame rate is advantageous when there is movement in the video stream as it maintains image quality throughout Max Bitrate Set the max bitrate to 32 16384 Kbps The higher value correspon
52. eeeeees 84 Chapter 8 PRA RCN aaa ue cece eea ais ee eaters ccs wae esac T coeen cases ue eseneewecee ctecnoeeeeenaneseestaenuiee 86 Chapter 9 EOS SAP CINE rierien E setesevececcuaevoserscecatesccevesencetsvencounenc esse ese csenaweeeciec ewer 90 Chapter 10 EGS eee seen E EE EE E EE AE ENEE E EET 92 10 1 Managing User ACCOUNTS scsssntntwansasacwasaatintwataweddmaniemaidwnsineddnemeanndasmenessabaiuasenituedemeatneneneneads 92 10 2 Configuring RTSP AUtTHeNtiCatiOn cccceccssccseceecseeeeeeeecceeceecceeeeeeesceeueeeeeseeeseeeneeeaaees 95 10 3 Configuring Anonymous ViSit cccecccsecesecescceeececcseccseccseceseceusceuseusceusseessaeetseenseeesees 95 10 4 Configuring IP Address Filter seccisersicrsieriorsiirrai nannaa 96 10 5 Viewing Device INFOrmation ccccecccseccsecescesscceecceecceeecseceeeeeeeeeueeseeseeeueeeeeseeeseeeneeaaees 96 HOG WVBR CTV AG 2 asc cecescecctetnsecciessenncdocaboancmatenqsittesnasadamaseenseneeaeeeeesoaelanosecsmeancateseenceassaussanseacacsaace 97 10 6 1 Rebooting the Speed DOMe ccccssccssccseeceecceccenececceceseceeeeeseeeueeeueeeeeeeeeneeeneeeaaees 97 10 6 2 Restoring Default Settings cccccccssccssecseecececsecceeeceeeeeeeeseesueeeeeseeseueseeeeeeseeeaeeaaes 97 10 6 3 Importing Exporting Configuration File ccccccsseccecsseccceseceeeeeceeeeeeceteeeeceeeeeeeeees 98 10 6 4 Upgrading the SV SOOM sierociniec a san EN E E 98 GE Hikvision Digital Technology Co
53. era The configuring of the PTZ parameters should be done before you control the PTZ unit Steps 1 Enter RS 485 parameter setting interface Configuration gt Advanced Configuration gt System gt RS485 Device Information Time Settings Maintenance R5465 DST Baud Rate 9600 bps ly Data Bit 6 Stop Bit 1 eS Parity None ly Flow Ctrl None PTZ Frotocol PELCO_P PTZ Address q Figure 10 14 RS 485 Settings 2 Set the RS 485 parameters and click EME to save the settings By default the Baud Rate is set as 9600 bps the Data Bit is 8 the stop bit is 1 and the Parity and Flow Control is None Note The Baud Rate PTZ Protocol and PTZ Address parameters of the speed dome should be exactly the same as those of the remote control device GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 101 Appendix Appendix 1 SADP Software Introduction Description of SADP SADP Search Active Devices Protocol is a kind of user friendly and installation free online device search tool It searches the active online devices within your subnet and displays the information of the devices You can also modify the basic network information of the devices using this software Search active devices online Search online devices automatically After launch the SADP software it automatically searches the online devices every 15 seconds from the subnet where your computer locates It displays
54. gs Text Overlay Privacy Mask C Display Name Display Date Display Week Camera Name IP dome Time Format 24 hour Date Format YYYY MM DD w Display Mode Not transparent amp Not flast v OSD Size 32 32 v Save Figure 6 37 OSD Settings 2 Check the corresponding checkbox to select the display of speed dome name date or week if required 3 Edit the speed dome name in the text field of Camera Name 4 Select from the drop down list to set the time format date format and display mode 5 You can use the mouse to click and drag the text frame feBame in the live view window to adjust the OSD position Figure 6 38 Adjust OSD Location ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Save 6 Click to activate above settings 6 5 3 Configuring Text Overlay Settings Purpose You can customize the text overlay Steps 1 Enter the Text Overlay Settings interface Configuration gt Advanced Configuration gt Image gt Text Overlay 2 Check the checkbox in front of textbox to enable the on screen display 3 Input the characters in the textbox 4 Use the mouse to click and drag the red text frame Tex in the live view window to adjust the text overlay position 5 Click BL Note There are up to 8 text overlays configurable Display Settings OSD Settings Text Overay Privacy Mask
55. gure 9 2 3 Click A to search log files The matched log files will be displayed on the Log interface search Log Major Type All Types Minor Type All Types i gt start Time 2012 06 26 00 00 00 End Time 2012 06 26 23 59 59 A Search Figure 9 2 Log Searching GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 91 heal Save Log 4 To export the log files click to save the log files in your computer GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 92 Chapter 10 Others 10 1 Managing User Accounts Enter the User Management interface Configuration gt Basic Configuration gt Security gt User Or Configuration gt Advanced Configuration gt Security gt User The admin user has access to create modify or delete other accounts Up to 32 user accounts can be created Lser Add Mo UserName Level admin Administrator Figure 10 1 User Information Adda User Steps 1 Click Ai to add a user 2 Input the new User Name select Level and input Password Note The level indicates the permissions you give to the user You can define the user as Operator or User 3 In the Basic Permission field and Camera Configuration field you can check or uncheck the permissions for the new user 4 Click ms to finish the user addition GE Hikvision Digital Technology Co Ltd All Rights Reserved
56. he SNMP software and manage to receive the speed dome information via SNMP port By setting the Trap Address the speed dome can send the alarm event and exception messages to the surveillance center Note The SNMP version you select should be the same as that of the SNMP software Steps 1 Enter the SNMP Settings interface Configuration gt Advanced Configuration gt Network gt SNMP TCPAP Port DDNS PPPoE SNMP 802 1X QoS FTP NAT Email SNMP v1 v2 Enable SNMPv1 Enable SNMP v2c Write SNMP Community private Read SNMP Community public Trap Address Trap Port 162 Trap Community public SNMP v3 Enable SNMPv3 F Read UserName Security Level Authentication Algorithm MD5 SHA Authentication Password Private key Algorithm DES AES Private key password Write UserName o Security Level Authentication Algorithm MD5 SHA Authentication Password Private key Algorithm DES AES Private key password L SNMP Other Settings SNMP Port 161 Save Figure 6 15 SNMP Settings 2 Check the corresponding version checkbox LEnable SNMP SNMPy1 ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 50 Enable SNMP y2c Enable SNMPY3 to enable the feature 3 Configure the SNMP settings Note The configuration of the SNMP software should be the sa
57. ht side or click to show the network parameter panel Modify network parameters Steps 1 Select the device to be modified in the device list and the network parameters of the device will be displayed in the Modify Network Parameters panel on the right side 2 Edit the modifiable network parameters e g IP address and port number 3 Enter the password of the admin account of the device in the Password field and click to save the changes i ices Refresh gt gt Total number of online devices 2 Modify Network Parameters ID Device Type IPv4 Address Port Software Version IPv4 Gateway Serial No IP Address 472 6 21 206 001 XX XXXXXXX X 172 6 21 206 8000 VX X XDUIIGXXXXXX 172 8 8 1 IK00000K 00000000X Port 8000 Subnet Mask 255 255 255 0 IPv4 Gateway 172 8 8 1 IPv6 Address IPv6 Gateway IPv6 Prefix Length Serial No Passworc Save Q Note Enter the admin password of the device before you save the network parameters Restore Default Password Serial code Confirm Note Serial code is a series of characters combined by the start time and the serial number of the device Figure A 1 2 Modify Network Parameters Restore default password Steps 1 Contact our technical engineers to get the serial code Note Serial code is a series of characters combined by the start time and the serial number of the device 2 Input the code in the Se
58. ill be saved in a sub folder in FTP server The name of folder can be defined as shown in following Figure 6 21 Use Camera Name Ea Use Camera Name Use Camera Number Figure 6 21 Child Directory Upload type To enable uploading the captured picture to the FTP server 3 Click one to save the settings Note If you want to upload the captured pictures to FTP server you also have to enable the continuous snapshot or event triggered snapshot in Snapshot interface For detailed information please refer to the Section 7 3 Configuring Snapshot Settings 6 3 9 Configuring NAT Settings UPnP Universal Plug and Play UPnP is a networking architecture that provides compatibility among networking equipment software and other hardware devices With the UPnP function enabled you don t need to configure the port mapping for each port and the camera is connected to the Wide Area Network via the router Steps 1 Enter the UPnP settings interface Configuration gt Advanced Configuration gt Network gt NAT 2 Check the Enable UPnP checkbox 3 Adda Friendly Name GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 54 TCPAP Port DDNS PPPoE SNMP 602 1 QoS FIP NAT Email Enable UPnP Friendly Name HIKVISION DS 2DF 275 AH 42337 Port Mapping Enable Port Mapping Port Mapping Mode Port Type External Port Router WAN IP Status HTTP 80 0 0 0 0 Not Va
59. in Hold down the left mouse button and drag the mouse to the upper left on the live video The corresponding position will be moved to the center of the live video and zoomed out Manual Tracking Before you start Please enter the Smart Tracking settings interface and enable smart tracking first Configuration gt Advanced Configuration gt PTZ gt Smart Tracking Steps 1 Click on the tool bar of live view interface 2 Left click a moving object in the live video The speed dome will track the object automatically Note not all the speed dome models support this function Please take the browser interface of the actual product as standard Please refer to the following sections for more information Configuring remote recording in Section 7 2 Configuring Recording Schedule Setting the image quality of the live video in Section 6 1 Configuring Local Parameters and Section 6 4 1 Configuring Video Settings Setting the OSD text on live video in Section 6 5 2 Configuring OSD Settings 4 4 Recording and Capturing Pictures Manually In the live view interface click on the toolbar to capture the live pictures or click to record the live video The local saving paths of the captured pictures and clips can be set in the Configuration gt Local Configuration interface To configure remote automatic recording please refer to Section 7 2 Configuring Recording Schedule Note The captured image will be saved
60. it users with different levels of permission in the admin login status Multiple users are allowed to access and control the same network speed dome via network simultaneously 3D Digital Noise Reduction Comparing with the general 2D digital noise reduction the 3D digital noise reduction function processes the noise between two frames besides processing the noise in one frame The noise will be much less and the video will be clearer GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 11 Chapter 2 Network Connection Before you start If you want to set the network speed dome via a LAN Local Area Network please refer to Section 2 1 Setting the Network Speed Dome over the LAN If you want to set the network speed dome via a WAN Wide Area Network please refer to Section 2 2 Setting the Network Speed Dome over the WAN 2 1 Setting the Network Speed Dome over the LAN Purpose To view and configure the speed dome via a LAN you need to connect the network speed dome in the same subnet with your computer and install the SADP or client software to search and change the IP of the network speed dome Note For the detailed introduction of SADP please refer to Appendix 1 2 1 1 Wiring over the LAN The following figures show the two ways of cable connection of a network speed dome and a computer Purpose To test the network speed dome you can directly connect the ne
61. ivity Day In Day mode the speed dome displays color image It is used for normal lighting conditions Night In Night mode the image is black and white Night mode can increase the sensitivity in low light conditions Notes When the IR Light Mode is auto the day night mode is adjusted automatically according to the IR Light Mode Manually setting the day night mode is invalid When the IR Light Mode is manual and the IR Light Bright is 0 you can set the day night mode manually When the IR Light Mode is manual and the IR Light Bright is not O the night mode is set as the default mode Manually setting the day night mode is invalid Mirror If you turn the MIRROR function on the image will be flipped It is like the image in the mirror The flip direction can be set to OFF LEFT RIGHT UP DOWN or CENTER Note This function varies depending on the models of speed dome WDR Wide Dynamic Range The wide dynamic range WDR function helps the camera provide clear images even under back light circumstances When there are both very bright and very dark areas simultaneously in the field of view WDR balances the brightness level of the whole image and provide clear images with details You can enable or disable the WDR function as shown in Figure 6 32 The wide dynamic level ranges from 0 to 100 WDR Enable gt Wide Dynamic Level 1 eel es 34 Figure 6 32 WDR GE Hikvision Digital Technology Co Ltd All
62. l Figure 10 3 Modify a User Delete a User Steps 1 Left click the user name you want to delete and click ugigis 2 Click os on the pop up dialogue box to delete the user User Figure 10 4 Delete a User ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 95 10 2 Configuring RTSP Authentication Purpose You can specifically secure the stream data of live view Steps 1 Enter the RTSP Authentication interface Configuration gt Advanced Configuration gt Security gt RTSP Authentication User RISP Authentication Authentication basic Figure 10 5 RTSP Authentication 2 Select the Authentication type basic or disable in the drop down list to enable or disable the RTSP authentication 3 Click a to save the settings 10 3 Configuring Anonymous Visit When you enable this function you can log into the camera without a username and password In login interface check the Anonymous checkbox and click Login to enter the camera as shown in Figure 10 7 User RTSP Authentication Anonymous Visit IP Address Filter Anonymous Visit Disable ka Figure 10 6 Anonymous Login English Y User Name Password i pocen Cocco Figure 10 7 Login Interface GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 96 10 4 Configuring IP Address Filter With this function on the camera allows cer
63. l Rights Reserved User Manual of Network Speed Dome 35 Timing Tasks Mon Tue Wed All Day Customize Period Start Time End Time Task Type ID 1 00 00 00 00 10 UTTU 00 00 00 00 00 00 00 00 00 00 2 3 4 5 b f a g 00 00 10 00 00 E E ee Copy to Week E Select All Mon C Tue C Wed C Thu C Fri C Sat C Sun Copy Figure 5 5 Edit the Schedule and Task Type 2 Choose the day you want to set the task schedule 3 Click All Day to set the schedule as all day or click Customize and input the Start Time and End Time for each task and click Enter on your keyboard to enter the time 4 Choose the task type from the drop down list You can choose scan preset pattern and etc Close Frame Scan Random Scan Patrol Pattern Preset Panorama Scan Tilt Scan Dome Reboot Dome Adjust Aux Output Figure 5 6 Task Types 5 After you set the scheduled task you can copy the task to other days Optional 6 Click OK to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 36 Note The time of each task can t be overlapped Up to 10 tasks can be configured for each day 5 Click one to save the settings 5 5 Configuring Park Actions Purpose This feature allows the dome to start a predefined park action scan preset pattern and etc automatically after a period of inactivity park time Note Scheduled Tasks fu
64. lid RTSP 554 0 0 0 0 Not Valid Server Port 8000 0 0 0 0 Not Valid Save Figure 6 22 Configure UPnP Settings 4 Click zave to save the settings Port Maping Steps 1 Check the Enable Port Mapping checkbox 2 Select the Port Mapping Mode as Auto or Manual 3 If in Manual mode you can check the checkbox of HTTP RTSP or SDK port according to your demand 4 Click oh to save the settings 6 3 10 Configuring Email Settings Purpose The system can be configured to send an Email notification to all designated receivers if an alarm event is detected e g motion detection event video loss tamper proof etc Before you start Please configure the DNS Server settings under Basic Configuration gt Network gt TCP IP or Advanced Configuration gt Network gt TCP IP before using the Email function Steps 1 Enter the Email Settings interface Configuration gt Advanced Configuration gt Network gt Email GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 55 Sender sender senders Address SMTP Server SMTP Port Enable SSL Interval Attached Image _ Authentication User Name Password SSS SS CSCS S i SSS SSS SSS SSS i CSCS S Receiver Receiver Receiver1s Address Receiver Receivers s Address Receivers Recelvers s Address Figure 6 23 Email Settings 2 Configure the following settings Sender The
65. me 78 Exception Type HDD Full we Normal Linkage Other Linkage Notify Surveillance Center Trigger Alarm Output Select All Send Email JA 1 A 2 Figure 6 49 Exception Settings 3 Click BELL to save the settings ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 79 Chapter 7 Record Settings Before you start To configure record settings please make sure that you have the network storage device within the network or the SD card inserted in your speed dome 7 1 Configuring NAS Settings Before you start The network disk should be available within the network and properly configured to store the recorded files log files etc Steps 1 Add the network disk 1 Enter the NAS Network Attached Storage Settings interface Configuration gt Advanced Configuration gt Storage gt NAS HDD No Type Server Address File Path 1 NAS er 2 NAS 3 NAS 4 NAS Figure 7 1 Add Network Disk 2 Enter the IP address of the network disk and the default format of file path is dvr share as shown in Figure 7 1 Note The network disk file path name share is user defined while creating the DVR network storage Please refer to the User Manual of NAS for creating the file path 3 Click BEM to add the network disk Note After having saved successfully you need to reboot the speed dome to activate the settings 2 Initialize the added network disk 1 Enter th
66. me as the settings you configure here 4 Click BEAL to save and finish the settings 6 3 6 Configuring 802 1X Settings Purpose The speed dome supports IEEE 802 1X standard IEEE 802 1X is a port based network access control It enhances the security level of the LAN When devices connect to this network with IEEE 802 1X standard the authentication is needed If the authentication fails the devices don t connect to the network The protected LAN with 802 1X standard is shown as follows A LS Authenticator Net k D etwork Dome etwork Switch _ a 1a y RADIUS Server j Figure 6 16 Protected LAN Before connecting the Network Camera to the protected LAN please apply a digital certificate from a Certificate Authority The network camera requests access to the protected LAN via the authenticator a switch The switch forwards the identity and password to the authentication server RADIUS server The switch forwards the certificate of authentication server to the network GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 51 camera lf all the information is validated the switch allows the network access to the protected network Steps 1 Connect the network camera to your PC directly with a network cable 2 Enter the 802 1X Settings interface Configuration gt Advanced Configuration gt Network gt 802 1X TCPAP Port D
67. me to the router 2 In the speed dome assign a LAN IP address the subnet mask and the gateway Refer to Section 2 1 2 Detecting and Changing the IP Address for detailed LAN configuration 3 Inthe router set the PPPoE user name password and confirm the password 4 Set port mapping E g 80 8000 and 554 ports The steps for port mapping vary depending on different routers Please call the router manufacturer for assistance with port mapping Note Refer to Appendix 2 for detailed information about port mapping 5 Apply a domain name from a domain name provider 6 Configure the DDNS settings in the setting interface of the router 7 Visit the speed dome via the applied domain name GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 15 e Connecting the network speed dome via a modem Purpose This speed dome supports the PPPoE auto dial up function The speed dome gets a public IP address by ADSL dial up after the speed dome is connected to a modem You need to configure the PPPoE parameters of the network speed dome Refer to Section 6 3 3 Configuring PPPoE Settings for detailed configuration ff i a Network Network s Internet s Network Cable a Cable a J Cable i Modem Speed Dome Computer Figure 2 6 Accessing the Speed Dome with Dynamic IP Note The obtained IP address is dynamically assigned via PPPoE so the IP address always changes after
68. n ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 17 Chapter 3 Access to the Network Speed Dome 3 1 Accessing by Web Browsers Steps 1 Open the web browser 2 In the address field input the IP address of the network speed dome e g 192 0 0 64 and press the Enter key to enter the login interface 3 Select English as the interface language on the top right of login interface 4 Input the user name and password and click ehh Note The default user name is admin password is 12345 English ha UserName admin Password 0 Lagin Figure 3 1 Login Interface 5 Install the plug in before viewing the live video and operating the speed dome Please follow the installation prompts to install the plug in GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 18 Live View Playback Log Configuration wa mea x Sub Stream Main Stream Please click here to download and install the plug in Close the browser when installin Figure 3 2 Download and Install Plug in Message from webpage Ea 1 New wersion of plug in is detected Update it Figure 3 3 Install Plug in 1 Setup Web Components Click Next to continue or Cancel to exit Setup cance Figure 3 4 Install Plug in 2 ME Hikvision Digital Technology Co Ltd All Rights Reserved User Ma
69. n be configured as 5 s 10 s 30 s 1 min 2 min 5 min or 10 min Overwrite If you enable his function and the HDD is full the new record files overwrite the oldest record files automatically Note The Pre record and Post record parameters vary depending on the speed E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome CO N dome model 4 Click Sul to edit the record schedule Edit Schedule Mon Tue Wed Thu Fri Sat Sun O All Day Customize Period Start Time End Time Record Type 1 00 00 SE 24 00 a 2 00 00 2 0D 00 2 Normal 3 00 00 SE 0D 00 ap 4 00 00 oo 00 ap Copy to Week Ll Select All Mon CI Tue CI Wea CI Thu LI Fri O sat LI sun Figure 7 7 Record Schedule 5 Choose the day to set the record schedule 1 Set all day record or segment record If you want to configure the all day recording please check the All Day checkbox If you want to record in different time sections check the Customize checkbox Set the Start Time and End Time Note The time of each segment can t be overlapped Up to 4 segments can be configured 2 Select a Record Type The record type can be Normal Motion Detection Alarm Motion Alarm Motion amp Alarm Normal If you select Normal the video will be recorded automatically according to the time of the schedule Record Triggered by Motion Detection If you select Motion Detection the video
70. n the limited surveillance area Scan Stops When scan limit stops are set the random scan frame scan auto scan tilt scan panorama scan is performed only in the limited surveillance area Note Manual Stops of Limit Type is prior to Scan Stops When you set these two limit types at the same time Manual Stops is valid and Scan Stops is invalid 3 Click the PTZ control buttons to find the left right up down limit stops you can also call the defined presets and set them as the limits of the dome 4 Click Set to save the limits or click Clear to clear the limits 5 4 Configuring Scheduled Tasks Purpose You can configure the network dome to perform a certain action automatically in a user defined time period Steps 1 Enter the Scheduled Task Settings interface Configuration gt Advanced Configuration gt PTZ gt Scheduled Tasks Basic Limit Initial Position Park Action Privacy Mask Scheduled Tasks Clear Confia Smar Tracking Manses Timing Tasks Edit Tasks u Zz 4 bi a iu j z 1 l Note Red and green colors are used to distinguish the neighboring scheduled tasks Save Figure 5 4 Configure Scheduled Tasks 2 Check the checkbox of Enable Scheduled Task 3 Set the Park Time You can set the park time a period of inactivity before the dome starts the scheduled tasks 4 Set the schedule and task details Steps 1 Click to edit the task schedule GE Hikvision Digital Technology Co Ltd Al
71. name of the email sender Sender s Address The email address of the sender SMTP Server The SMTP Server IP address or host name e g smtp 263xmail com SMTP Port The SMTP port The default TCP IP port for SMTP is 25 Enable SSL Check the checkbox to enable SSL if it is required by the SMTP server Attached Image Check the checkbox of Attached Image if you want to send emails with attached alarm images Interval The interval refers to the time between two actions of sending attached pictures ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 56 Authentication optional If your email server requires authentication check this checkbox to use authentication to log in to this server and enter the login user name and password Receiver Select the receiver to which the email is sent Up to 2 receivers can be configured Receiver The name of the user to be notified Receiver s Address The email address of user to be notified 3 Click BME to save the settings 6 4 Configuring Video and Audio Settings 6 4 1 Configuring Video Settings Steps 1 Enter the Video Settings interface Configuration gt Basic Configuration gt Video Audio gt Video Or Configuration gt Advanced Configuration gt Video Audio gt Video Video Audio Stream Type Main Stream Normal ly Video Type Video amp Audio gt Resolution 1920 10680P Bitrate Type Constant Video Quality M
72. nction is prior to Park Action function When these two functions are set at the same time only the Scheduled Tasks function takes effect Steps 1 Enter the Park Action Settings interface Configuration gt Advanced Configuration gt PTZ gt Park Action Basic Limit Initial Position Park Action PrivacyMask Scheduled Tasks Clear Confia Smart Tracking ames eae Action Type Save Figure 5 7 Set the Park Action 2 Check the checkbox of Enable Park Action 3 Set the Park Time as the inactivity time of the dome before it starts the park actions 4 Choose Action Type the from the drop down list Figure 5 8 Action Types 5 Click a to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 37 5 6 Configuring Privacy Mask Purpose Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being live viewed and recorded Steps 1 Enter the Privacy Mask Settings interface Configuration gt Advanced Configuration gt PTZ gt Privacy Mask Basic Limit Initial Position Park Action Privacy Mask Scheduled Tasks Clear Config Smart Tracking Enable Privacy Masks l ya v amp AL Jog Pd EE mers p b v Oo o ene z camel fi coor ERY Preset 2 Preset 3 Preset 4 Preset 5 l Preset 6 v Stop Drawing Clear All No Name Type Enable Zoom Limit 1 Priva
73. ngs interface vary depending on the models of speed dome You can double click the live view to enter full screen mode and double click it again to exit Steps 1 Enter the Display Settings interface Configuration gt Basic Configuration gt Image gt Display Settings Or Configuration gt Advanced Configuration gt Image gt Display Settings 2 Set the image parameters of the speed dome Display Settings OSD Settings Text Overlay Brightness Contrast Saturation Limit Gain Sharpness Focus Mode Min Focus Distance Exposure Mode Smart iR Video Standard Day Night Switch Sensitivity Mirror Slow Shutter Slow Shutter Level WDR Lens Initialization BLC White Balance Digital Noise Reduction Noise Reduction Level Defog Mode Zoom Limit Chroma Suppress HLC IR Light Mode IR Light Sensitivity Local Output Figure 6 27 Display Settings s e 8 8 8 T a Semi auto K em M Auto v OFF iy 60hz v Auto B5 Normal Eo OFF vl oO w g O OFF x mto z ON v m a 50 OFF 3 E z 6 OFF v Auto v 50 oN z E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 61 Brightness This feature is used to adjust brightness of the image The value ranges from O to 100 Contrast This feature enhances the difference in color an
74. nload video files Download captured pictures Display Status 1 Speed playback Playback by frame status Note You can choose the file paths locally for downloaded playback video files and pictures in Local Configuration interface Please refer to Section 6 1 Configuring Local Parameters for details Drag the progress bar with the mouse to locate the exact playback point You can also input the time and click to locate the playback point in the Set playback time field You can also click EE to zoom out in the progress bar gt Figure 8 4 Set Playback Time 2012 04 25 09 57 54 D Command M Schedule M Alarm O Manual Figure 8 5 Progress Bar The different colors of the video on the progress bar stand for the different video GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 88 types as shown in Figure 8 6 E Command Schedule M Alarm O Manual Figure 8 6 Video Types Task 2 To download the video files Steps 1 Click onthe playback interface The pop up menu is shown in Figure 8 7 2 Set the start time and end time Click Search The corresponding video files are listed on the left F No File Name File Date File Size Progress O 1 ch01_08000000106000100 2013 07 08 00 07 16 23 MB Start Time O 2 ch01_08000000107000000 2013 07 08 01 15 37 247 MB d 3 ch01_08000000108000000 2013 07 08 02 23 55 247 MB 2013 07 8 00 00 00 E 4 ch01_080000001090
75. nnanye snadeavaneabalvaunislnsndinaunusbuusueeaaananatcasenagersencas 44 63 2 CONMPMPUNINE POF SATEINGS siizssccddecesexticnsaceiden a E 45 632 COMMUNE PPPOE CCN SS soci os stadt atehedatiet goss aE E EAEE E AE 46 6 3 4 Configuring DDNS Settings cccccccssccssccseeeseececeeeeeneceucceeeseeeeeeeeeeseeeeeeeeeeeeeeeaeeeseeees 46 6 3 9 CONT SUIS SNMP Settings serseri orinni renanira nna ESAN ENEN AATE 49 6 3 6 Coniieurnnge 302 1X Seine Sasarina a EEEE 50 697 Conie rne QoS Seine aner E EE A S 51 638 CONTISUTING FIP SQtEINGS sscicceccsecnaesicsentaasinsacinnatnieaiha de senedasisneeddceinienidaesemienatersslndaosdasssencss 52 6 3 9 Configuring NAT SettingsS esseeseserseeseeseesessesscssessesreseeseeseesessessoseosessessessessesreereseesees 53 6310 Conigcu rnne Emil SemNE Sarsan A aE 54 6 4 Configuring Video and Audio Settings ccccccsecscccsececeeceescceuceeucceeceeeeeeeeseessceeeceeeeees 56 6 4 1 Configuring Video SEttINGS cccceeccssccsscceeeesecceeceeeeeseceuceeueceeeseeeeeeceeseeeeeeeeeeeeeeeseeees 56 GAZ Conigunne Adio STINGS eosrripeesin orie r Nanana ESTNE ANEREN TESES 57 643 COMTPUNINE ROU SQ CNS acsansactesecmpcdicenvaclescueaascpseedianesenelanedea dlaacssagedeaumseauaeoasveaaneanieetant 58 6 5 Conneurine VS ES oo escetecrssieasinpannneiscranndis AE E E EE OEE A 59 6 5 1 Configuring Display Settings ccccccccssccseccsecceeceeeeeseceecceneceecceeeseececseeseeeeeeeeeeeeeees 59 6
76. nt lamps installed near the speed dome GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 65 Sodium Lamp You can select this mode when there are sodium lamps installed near the speed dome Auto Track In Auto Track mode white balance is continuously being adjusted in real time according to the color temperature of the scene illumination Note This function varies depending on the models of speed dome 3D Digital Noise Reduction You can enable or disable the 3D Digital Noise Reduction function as shown in Figure 6 35 The level ranges from O to 100 Digital Noise Reduction Normal Mode gt Noise Reduction Level es o Figure 6 35 3D Digital Noise Reduction Note This function varies depending on the models of speed dome De fog Mode When there is fog in the image you can enable this function to get clear image Zoom Limit You can set Zoom Limit value to limit the maximum value of zooming The value can be set to 20 40 80 160 and 320 Note This function varies depending on the models of speed dome IR Light Mode IR light mode can be set to Auto and Manual Auto The brightness of the infrared light will be adjusted automatically IR Light Sensitivity value ranges from 0 to 100 Manual you need to adjust the brightness value of infrared light manually IR Light Bright value ranges from O to 100 Note For detailed parameters configuration of
77. nterface 2 Configure the following settings e Basic Parameters Enable disable proportional pan and preset freezing set the preset speed keyboard control speed and auto scan speed Proportional Pan If you enable this function the pan tilt speeds change according to the amount of zoom When there is a large amount of zoom the pan tilt speed will be slower for keeping the image from moving too fast on the live view image Preset Freezing This function enables the live view to switch directly from one scene defined by a preset to another without showing the middle areas between these two to ensure the surveillance efficiency It can also reduce the use of bandwidth in a digital network system Note Preset freezing function is invalid when you calling a pattern Preset Speed You can set the speed of a defined preset from 1 to 8 Keyboard Control Speed Define the speed of PTZ control by a keyboard as Low Normal or High Auto Scan Speed The dome provides 5 scan modes auto scan tilt scan frame scan random scan and panorama scan The scan speed can be set from level 1 to 40 PTZ OSD Set the on screen display duration of the PTZ status GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 33 Zoom Status Set the OSD duration of zooming status as 2 seconds 5 seconds 10 seconds Always Close or Always Open PT Status Set the azimuth angle display duration whil
78. nual of Network Speed Dome 19 Setup Web Components So amp x Setup has finished installing Web Components on your computer Click Finish to exit Setup Figure 3 5 Install Plug in 3 Note You may have to close the web browser to install the plug in Please reopen the web browser and log in again after installing the plug in 3 2 Accessing by Client Software The product CD contains the client software You can view the live video and manage the speed dome with the client software Follow the installation prompts to install the client software and WinPcap The configuration interface and live view interface of client software are shown bellow gt File System View Tool Help iVMS 4200 PCNVR EE Main View Playback A E map lt y Configuration 14 48 53 ee Ld i Import Camera aN writ os Camera Settings Adding modifying and advanced configuration of the camera General configuration of the camera including encoding par 2 Record Schedule Event Management A Adding modifying deleting and advanced configuration of re Management and linkage method settings of event alarm in 1 0 Settings Management of alarm I O including name and mode v r Disk Management a v System Configuration Management of recording storage devices Configuration of general and network parameters of system Account Management Settings of system user and its privileges Figure 3 6 iVMS 4200 PCNVR
79. ocal configuration file and then click Import to start importing configuration file Note You need to reboot the speed dome after importing configuration file Export 3 Click and set the saving path to save the configuration file in local storage Import Config File Config File Browse Import Status Export Config File Export Figure 10 12 Import Export Configuration File 10 6 4 Upgrading the System Steps 1 Enter the Maintenance interface Configuration gt Basic Configuration gt System gt Maintenance Or Configuration gt Advanced Configuration gt System gt Maintenance GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 99 2 Click L B 0WSe to select the local upgrade file and then click __ Upgrade to start remote upgrade Note The upgrading process will take 1 to 10 minutes Please don t disconnect power of the speed dome during the process The speed dome reboots automatically after upgrading Remote Upgrade Status Note The upgrading process will be 1 to 10 minutes please don t disconnect power to the device durin q the process The device reboots automatically after upgrading Figure 10 13 Remote Upgrade GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 100 10 7 RS 485 Settings Purpose The RS 485 serial port is used to control the PTZ of the cam
80. ol GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 29 4 5 4 Setting Calling a Pattern Purpose A pattern is a memorized series of pan tilt zoom and preset functions It can be called on the pattern settings interface There are up to 4 patterns for customizing Setting a Pattern Steps r 1 Inthe PTZ control panel click to enter the pattern settings interface 2 Select a pattern number from the list as shown in Figure 4 9 elelr Patten O O 2 Hh amp Pattern 2 Pattern 3 Pattern 4 Figure 4 9 Patterns Settings Interface 3 Click to enable recording the panning tilting and zooming actions 4 Use the PTZ control buttons to move the lens to the desired position after the information of PROGRAM PATTERN REMAINNING MENORY shown in Figure 4 10 is displayed on the screen e Pan the speed dome to the right or left e Tilt the speed dome up or down e Zoom in or out e Refocus the lens K i hy i IM i TERN REMAINING MEMORY C Figure 4 10 Remaining Memory 5 Click to save all the pattern settings Buttons on the Patterns interface Buttons Description Start to record a pattern Stop recording a pattern E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 30 Call the current pattern Stop the current pattern Delete the current pattern Notes These 4
81. old temperatures the operating temperature should be between 30 C 65 C dusty or damp environment To avoid heat accumulation good ventilation is required for a proper operating environment While shipping the product should be packed in its original packing Please use the provided glove when open up the product cover Do not touch the product cover with fingers directly because the acidic sweat of the fingers may erode the surface coating of the product cover Please use a soft and dry cloth when clean inside and outside surfaces of the product cover Do not use alkaline detergents Improper use or replacement of the battery may result in hazard of explosion Please use the manufacturer recommended battery type GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 5 Table of Contents Chapter 1 UO avis cae de ceca os seen aces cae ee ced ao ee a eae cco ATOA eens 8 1 1 Slem RS CUMIN TN SM wearers a cincarnceeorenters Gteg a EE EEE 8 1 2 PSN E EE E EEA E EA se 8 1 3 FUNC UON oren E E E E E noe 8 Chapter 2 Network Connection sessesessecessecessececscsecseceoseceosececseceoseceosecececsececseseoseseoseseoseseeees 11 2 1 Setting the Network Speed Dome over the LAN ccsccceecceecceeeeecceeeeeeeeeesceeseeeeeeeeeees 11 Pade Winne over Me LAN sooren krr EEEE E EEES EEE 11 2 1 2 Detecting and Changing the IP Address ccccscccsecceeeeseceeeee
82. r Address of the IP Server 2 Click oes to save the settings Note The Server Address should be entered with the static IP address of the computer that runs the IP Server software For the IP Server you have to apply a Static IP subnet mask gateway and preferred DNS from the ISP TCPAP Port DDNS PPPoE SNMP 802 1 QoS FIP NAT Email Enable DDNS DODN Type server Address Figure 6 13 IPServer Settings HiIDDNS Steps 1 Enter the Server Address www hik online com 2 Enter the Domain name of the camera The domain is the same with the device alias in the HiDDNS server 3 Click SEL to save the settings TCPAP Port DDNS PPPoE SNMP 802 1X QoS FTP NAT Email Enable DDNS DDNS Type HIDDNS server Address www hik online com Domain Port User Name Password Confirm Figure 6 14 HiIDDNS Settings NO IP Steps 1 Enter Server Address of NO IP 2 In the Domain text field enter the domain name obtained from the NO IP website 3 Enter the Port of NO IP server 4 Enter the User Name and Password registered on the NO IP website 5 Click ae to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 49 6 3 5 Configuring SNMP Settings Purpose You can use SNMP to get speed dome status and parameters related information Before you start Before setting the SNMP please use t
83. r as an adapter overload may cause over heating and can be a fire hazard When the product is installed on a wall or ceiling the device should be firmly fixed To reduce the risk of fire or electrical shock do not expose the indoor used product to rain or moisture This installation should be made by a qualified service person and should conform to all the local codes Please install blackouts equipment into the power supply circuit for convenient supply interruption ifthe product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the product yourself We shall not assume any responsibility for problems caused by unauthorized repair or maintenance GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 4 A Make sure the power supply voltage is correct before using the product Do not drop the product or subject it to physical shock Do not install the product on vibratory surface or places Do not expose it to high electromagnetic radiating environment Do not aim the lens at the strong light such as sun or incandescent lamp The strong light can cause fatal damage to the product The sensor may be burned out by a laser beam so when any laser equipment is being used make sure that the surface of the sensor not be exposed to the laser beam Do not place the product in extremely hot c
84. r network device such as a router It will ask for a reboot for the settings to take effect 6 3 8 Configuring FTP Settings Purpose You can set a FTP server and configure the following parameters for uploading captured pictures Steps 1 Enter the FTP Settings interface Configuration gt Advanced Configuration gt Network gt FTP TCPAP Port DONS PPPoE SNMP 602 1 QoS FIP NAT Email server Address 201 34 117 34 Por User Name Anonymous Password Confirm Directory Structure Save in the root directory Parent Directory Child Directory Upload Type C Upload Picture Figure 6 19 FTP Settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 53 2 Configure the FTP settings including server address port user name password directory and upload type Setting the directory in FTP server for saving files In the Directory Structure field you can select the root directory parent directory and child directory Root directory The files will be saved in the root of FTP server Parent directory The files will be saved in a folder in FTP server The name of folder can be defined as shown in following Figure 6 20 Use Device Name ba Use Device Name Use Device Number Use Device IP address Figure 6 20 Parent Directory Child directory It is a sub folder which can be created in the parent directory The files w
85. r of Alarm Output 1 Figure 10 9 Device Information 10 6 Maintenance 10 6 1 Rebooting the Speed Dome Steps 1 Enter the Maintenance interface Configuration gt Basic Configuration gt System gt Maintenance Or Configuration gt Advanced Configuration gt System gt Maintenance 2 Click Reboot_ to reboot the network speed dome Reboot Reboot Reboot the device Figure 10 10 Reboot the Device 10 6 2 Restoring Default Settings Steps 1 Enter the Maintenance interface Configuration gt Basic Configuration gt System gt Maintenance Or Configuration gt Advanced Configuration gt System gt Maintenance GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 98 2 Click Restore or Default _ to restore the default settings Note Clicking Default _ restores all the parameters to default settings including the IP address and user information Please use this button with caution Default Restore Reset all the parameters except the IP parameters and user information to the default settings Default Restore all parameters to default settings Figure 10 11 Restore Default Settings 10 6 3 Importing Exporting Configuration File Steps 1 Enter the Maintenance interface Configuration gt Basic Configuration gt System gt Maintenance Or Configuration gt Advanced Configuration gt System gt Maintenance 2 Click Browse to select the l
86. rameters 6 6 2 Configuring Video Loss Alarm Steps 1 Enter the Video Loss Setting interface Configuration gt Advanced Configuration gt Events gt Video Loss Enable Video Loss Detection Arming Schedule Edit Normal Linkage Other Linkage C Notify Surveillance Center Trigger Alarm Output Select All C Send Email A 1 A2 Figure 6 44 Video Loss ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome a o 2 Check the Enable Video Loss Detection checkbox to enable the video loss detection 3 Click StL to edit the arming schedule for video loss detection The arming schedule configuration is the same as the setting of the arming schedule for motion detection Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6 6 1 4 Check the checkbox to select the linkage method taken for the video loss alarm Notify surveillance center send email and trigger alarm output are selectable Please Step 3 Set the Alarm Actions for Motion Detection in Section 6 6 1 5 Click to save the settings 6 6 3 Configuring Tamper proof Alarm Purpose You can configure the speed dome to trigger the alarm actions when the lens is covered Steps 1 Enter the Tamper proof Settings interface Configuration gt Advanced Configuration gt Events gt Tamper proof V Enable Tamper proof Area Settings Figure 6 45 Tamper proof Alarm 2 Check Enable Tamper
87. rebooting the speed dome To solve the inconvenience of the dynamic IP you need to get a domain name from the DDNS provider E g DynDns com Please follow below steps for normal domain name resolution and private domain name resolution to solve the problem Normal Domain Name Resolution I Domain Name Resolution Server PortMap Network so Network rS K Network Cable Z Cable J Cable i 4 i Router with Dynamic IP C uter Speed Dome a Computer Figure 2 7 Normal Domain Name Resolution Steps 1 Apply adomain name from a domain name provider 2 Configure the DDNS settings in the DDNS Settings interface of the network speed dome Refer to Section 6 3 4 Configuring DDNS Settings for detailed configuration 3 Visit the speed dome via the applied domain name Private Domain Name Resolution GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 16 ro PC IP Server Static IP A Port Map i clr iii Network o MaN Network abe q _ J Cable t Py Pie oll Router with Dynamic IP Computer Figure 2 8 Private Domain Name Resolution Steps 1 Install and run the IP Server software in a computer with a static IP 2 Access the network speed dome through the LAN with a web browser or the client software 3 Enable DDNS and select IP Server as the protocol type Refer to Section 6 3 4 Configuring DDNS Settings for detailed configuratio
88. rial code field and click Semm to restore the default password GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Appendix 2 Port Mapping The following settings are for TP LINK router TL R410 The settings vary depending on different models of routers Steps 1 Select the WAN Connection Type as shown below 108M Wireless Router WAN Model No TL WR641G TL WR6426 WAN Connection Type PPPoE v Dynamic IP Basic Settings User Name PPPoE 602 1 Dynamic IP Password WAN Figure A 2 1 Select the WAN Connection Type 2 Set the LAN parameters of the router as in the following figure including IP address and subnet mask settings 108M Wireless Router LAN Model No TL WR641G TL WR6426 MAC Address 00 14 78 64 DB 0C a IP Address 192 168 10 1 Basic Settings Subnet Mask 256 255 255 0 ie LAN j Save Figure A 2 2 Set the LAN parameters 3 Set the port mapping in the virtual severs of Forwarding You need to forward ports 80 8000 8200 8210 and 554 for a speed dome Notes You can change 80 8000 and 554 ports value in the speed dome with web browser or client software In the speed dome the 8200 8210 ports change with the 8000 port with a constant value of 200 E g if the 8000 port is changed to 8005 then the 8200 8210 ports should be changed to 8205 8215 ME Hikvision
89. schedule you have to configure the settings on the Motion Detection and Alarm Input Settings interfaces Please refer to Section 6 6 1 and Section 6 6 4 for detailed information Edit Schedule Mon 2 d Tue Wed Thu Fri Sat Sun All Day Customize Period Start Time End Time Record Type 00 00 SE 24 00 ap 00 00 SE 0 00 ap ian 00 00 j 4 Copy to Week M Select All Mon W Tue b Wed WI Thu Ml Fri MH sat Wl Sun Figure 7 8 Edit Record Schedule 3 Check the checkbox L SelectAll and click sen to copy settings of this day to the whole week You can also check any of the checkboxes before the E Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 84 date and click co 4 Click a to save the settings and exit the Edit Record Schedule interface 6 Click SEL to save the settings 7 3 Configuring Snapshot Settings Purpose You can configure the scheduled snapshot and event triggered snapshot You can upload the captured pictures to a FTP server Basic Settings Steps 1 Enter the Snapshot Settings interface Configuration gt Advanced Configuration gt Storage gt Snapshot 2 Check the Enable Timing Snapshot checkbox to enable continuous snapshot Check the Enable Event triggered Snapshot checkbox to check event triggered snapshot 3 Select the quality of the snapshot 4 Set the time interval between two snapshots 5 Click os to save the
90. settings END v Uploading to FTP s NOTE Please make sure that the FTP server is online You can follow below configuration instructions to upload the snapshots to FTP Upload continuous snapshots to FTP Steps 1 Configure the FTP settings and check Upload Picture checkbox in FTP Settings interface Please refer to Section 6 3 8 Configuring FTP Settings for more details to configure FTP parameters 2 Check the Enable Timing Snapshot checkbox AN h END 4 Upload event triggered snapshots to FTP Steps GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 85 1 Configure the FTP settings and check Upload Picture checkbox in FTP Settings interface Please refer to Section 6 3 8 Configuring FTP Settings for more details to configure FTP parameters 2 Check Upload ta FTP checkbox in Motion Detection Settings or Alarm Input interface Please refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6 6 1 Configuring Motion Detection or Step 4 Configuring External Alarm Input in Section 6 6 1 Configuring Motion Detection 3 Check the Enable Event triggered Snapshot checkbox Timing W Enable Timing Snapshot Format JPEG Resolution 1920 1080 Go Quality High Interval 0 millisecond Event Triggered Enable Event Triggered Snapshot Format JPEG gt Resolution 1920 1080 B Quality High Interval 0 millisecond Cap
91. tain IP addresses whether to log in or not Filter Type Forbid the IP addresses added in Forbidden the IP Address Filter interface to log in Allow only the IP addresses Allowed added in the IP Address Filter interface to log in User RTSP Authentication Anonymous Visit IP Address Filter Enable IP Address Filter IP Address Filter Type Forbidden IP Address Filter Mo IF 1 172 6 21 119 Figure 10 8 IP Address Filter 10 5 Viewing Device Information Enter the Device Information interface Configuration gt Basic Configuration gt System gt Device Information Or Configuration gt Advanced Configuration gt System gt Device Information In the Device Information interface you can edit the Device Name Other information of the network speed dome such as Model Serial No Firmware Version Encoding Version Number of Channels Number of HDDs Number of Alarm Input and Number of Alarm Output are displayed The information cannot be changed in this menu It is the reference for maintenance or modification in future GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 97 Device Information Time Settings Maintenance Basic Information Device Name Net IPDOME Model XX AARKMAR XK Serial No XX XXXXXXX A MAMAN Firmware Version v4 2 1 121022 Encoding Version V2 0 build 121022 Number of Channels 1 Number of HDDs 0 Number of Alarm Input 1 Numbe
92. tput drop down list Alarm Name Set a name in for the alarm output optional The Delay time can be set to 5sec 10sec 30sec 1min 2min 5min 10min or Manual The delay time refers to the time duration that the alarm output remains in effect after alarm occurs Click Bell to enter the Edit Schedule Time interface The time schedule configuration is the same as the settings of the arming schedule for motion detection Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6 6 1 Configuring Motion Detection You can copy the settings to other alarm outputs Click GME to save the settings GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome a ae Alarm Output Arte Alarm Name alarmout Delay CENE Arming Schedule Copy to Alarm A gt 1 Figure 6 48 Alarm Output Settings 6 6 6 Handling Exception The exception type can be HDD full HDD error network disconnected IP address conflicted and illegal login to the speed domes Steps 1 Enter the Exception Settings interface Configuration gt Advanced Configuration gt Events gt Exception 2 Check the checkbox to set the actions taken for the Exception alarm Refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6 6 1 Configuring Motion Detection ME Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Do
93. ture Number 4 Figure 7 9 Snapshot Settings ANA i y GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome Chapter 8 Playback Purpose This section explains how to view the remotely recorded video files stored in the network disks or SD cards Task 1 To play back the video files Steps Playback 1 Click on the menu bar to enter playback interface Live View Playback Log Configuration A admin we Logout Status 1 Speed 4 Aug Sun Mon Tue 2012 08 O0P 12 31 26 00 00 HCommand M Schedule BAlarm Manual Figure 8 1 Playback Interface Select the date and click sarch 44 Apr 2012 gt Sun Mon Tue Wed Tho Fn Sat 1 2 3 4fls 6 7 s o 10 1 22 13 14 15 16 17 18 19 20 21 n m4 25 26 27 28 29 30 O Search Figure 8 2 Search Video ME Hikvision Digital Technology Co Ltd All Rights Reserved 2012 Wed Thu Q Search Set playback time Fri 3 10 1T 24 31 00 ad gt Sat 11 25 User Manual of Network Speed Dome 87 3 Click to play the video files found on this date The toolbar on the bottom of Playback interface can be used to control playing process os a gt gt pO orm B Figure 8 3 Playback Toolbar Table 8 1 Description of the buttons C omon operon omon pation Om w i eeen en Audio on and adjust P n 1a volume Mute da Speed down E SS Dow
94. twork speed dome to the computer with a network cable as shown in Figure 2 1 Refer to the Figure 2 2 to set the network speed dome over the LAN via a switch or a router eal Cable i i Figure 2 1 Connecting Directly GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 12 Network Cable argy Speed Dome Switch or Router PC Figure 2 2 Connecting via a Switch or a Router 2 1 2 Detecting and Changing the IP Address You need the IP address to visit the network speed dome Steps 1 To get the IP address you can choose either of the following methods Use SADP a software tool which can automatically detect the online network speed domes in the LAN and list the device information including IP address subnet mask port number device serial number device version etc shown in Figure 2 3 Use the client software to list the online devices Please refer to the user manual of client software for detailed information 2 Change the IP address and subnet mask to the same subnet as that of your computer 3 Enter the IP address of network speed dome in the address field of the web browser to view the live video Notes The default IP address is 192 0 0 64 The default user name is admin and password is 12345 For accessing the network speed dome from different subnets please set the gateway for the network speed dome after you logged in
95. will be recorded when the motion is detected Besides configuring the recording schedule you have to set the motion detection area and check the checkbox of Trigger Channel in the Linkage Method of Motion Detection Settings interface For detailed information please refer to the Step 1 Set the Motion Detection Area in the Section GE Hikvision Digital Technology Co Ltd All Rights Reserved User Manual of Network Speed Dome 00 3 6 6 1 Configuring Motion Detection Record Triggered by Alarm If you select Alarm the video will be recorded when the alarm is triggered via the external alarm input channels Besides configuring the recording schedule you have to set the Alarm Type and check the checkbox of Trigger Channel in the Linkage Method of Alarm Input Settings interface For detailed information please refer to Section 6 6 4 Configuring External Alarm Input Record Triggered by Motion amp Alarm If you select Motion amp Alarm the video will be recorded when the motion and alarm are triggered at the same time Besides configuring the recording schedule you have to configure the settings on the Motion Detection and Alarm Input Settings interfaces Please refer to Section 6 6 1 and Section 6 6 4 for detailed information Record Triggered by Motion Alarm If you select Motion Alarm the video will be recorded when the external alarm is triggered or the motion is detected Besides configuring the recording

Hikvision Digital Technology DS-2DF7276-A surveillance camera

Contents

Download Pdf Manuals

Related Search

Related Contents