Cablecon FM-13
Contents
1. MOUNTING INSTRUCTIONS FOR TYPE 13 STEP DS O Use a Stanley knife or similar for the stripping operation A B A Cut and remove the jacket outer conductor and dielectric from the inner conductor in one STEP 1 operation to obtain dimension B exposed So inner conductor B If necessary clean the inner conductor using a conductor cleaner item no 98500900 or another other proper tools C Cut and remove the jacket to obtain dimension A Please make sure not to damage the outer conductor during this operation After completed operation the outer conductor must Sere be smooth and the prepared cable dimensions should be as follows A 10 0 mm B 12 0 mm STEP 2 STEP 3 Place the back nut over the cable and push it backward to reach mechanical stop STEP 3 Push the connector front part and the cable with the back nut together by hand During this operation the inner conductor of the cable slips into the centre STEP 4 _ f seizing mechanism of the front part STEP 4 Tighten the back nut by hand as far as possible Then tighten the back nut to positive stop by use of two spanners Keep the body in place during the FINISHED OPERATION operation Size of open ended spanners 20 mm for main nut and body ISO 9001 certified Distributor CABELCON E connectors Corning Cabelcon ApS Industriparken 10 DK 4760 Vordingborg Tel 45 55 98 5599 Fax 45 55 98 55 04 E mail cabelcon cab2. elcon dk www cabelcon dk
Download Pdf Manuals
Related Search