Sencor SCP 3201GY hob
Contents
1. 200 1800 W Safety class For electric SHOCK protection REA EN CE rere 11 Glossary of technical terms Safety class for electric shock protection Class Il Electric shock protection is provided by double or heavy duty insulation We reserve the right to change text and technical specifications EN 11 Copyright 2013 Fast CR a s Revision 08 2013 Induction Cooktop SCP 3201GY INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this product at your applicable collection point for the recycling of electrical amp electronic equipment waste Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health which could be caused as a result of improper liquidation of waste Please ask your local authorities or the nearest waste collect2. by the operation of the induction cooktop e Do not place metal objects such as knives forks spoons and lids on the cooktop of the appliance because they may heat up e Always turn off the appliance and disconnect it from the power socket if you leave it without supervision or if you will not be using it and before cleaning Attention Hot surface Do not touch the hot plate while the appliance is in operation and immediately after finishing using it The residual heat transferred from the bottom of the cookware to the hotplate could cause burns Allow the appliance to fully cool down before cleaning moving or storing it e Do not disconnect the appliance from the power point by pulling the power cord this could damage the power cord power socket Disconnect the cord from the power socket by gently pulling out the plug of the power cord e Make sure the power cord does not hang over the edge of a table or that it is not touching a hot surface e It is forbidden to use the appliance if it has a damaged power cord plug In case the power cord is damaged have it replaced at an authorised service centre Copyright 2013 Fast CR a s Revision 08 2013 Induction Cooktop SCP 3201GY e Do not use the appliance if it is not working correctly if the surface of the hotplate is cracked if it has been dropped on the floor or has been submerged in water If the appliance is damaged in any way it must not be put into operation until rep
3. CONTROL PANEL AND DISPLAY se 8888 ON OFF touch button It serves to turn the induction cooktop on or to turn it off to the stand by mode Display The display will show the power level set temperature automatic shut off time or error messages If the induction cooktop is in the stand by mode the value OFF turned off will be shown on the display Indication of the power level display mode Menu touch button After turning on the induction cooktop with the Menu button you switch between the modes of automatic shut off timer setting temperature and the power level Indication of the set temperature display mode Indication of the automatic shut off timer display mode Control dial It is used to set the power level temperature and the automatic shut off timer EN 7 Copyright 2013 Fast R a s Revision 08 2013 Induction Cooktop SCP 3201GY THE PRINCIPLE AND ADVANTAGES OF INDUCTION COOKING When cooking on ordinary cooktops the hotplate needs to be heated first and only thereafter is heat transferred to the bottom of the cookware placed on the hotplate Significant thermal losses occur during the transfer of heat from the hotplate to the bottom of the cookware especially when the bottom of the cookware is not in full contact with the hotplate or if the hotplate is soiled When cooking on an induction cooktop the metal bottom of the pot is directly heated by electromagnetic waves This minimises the
4. Induction Cooktop User s manual SENCOR SCP 3201GY Prior to using this appliance please read the user s manual thoroughly even in cases when one has already familiarised themselves with previous use of similar types of products Use the appliance only as described in this manual Keep this manual for later use We recommend saving the original shipping cardboard box packaging material receipt and warranty card for the duration of warranty In the event of shipping pack the appliance using the original packaging materials only EN 1 Copyright 2013 Fast R a s Revision 08 2013 Induction Cooktop SCP 3201GY CONTENTS IMPORTANT SAFETY INSTRUCTIONS i665 UU eee eee sewn eee 3 RADIO WAVE INTERFERENCE EUROPEE AERE EX RD eae eee A EN el eee ee eee Rd 5 DESCRIPTION OF THE INDUCTION COOKTOP EGO RR OR sees d 6 DESCRIPTION OF THE CONTROL PANEL AND DISPLAY 12 3 2 arb rmn Eure RO eR ERE Ven d es 7 THE PRINCIPLE AND ADVANTAGES OF INDUCTION COOKING 8 oet aee 8 COOKWARE SUITABLE FOR INDUCTION COOKING 4 241 9 226 Rare ch ORCI RR RC OR n SS waa 8 COOKWARE THAT CANNOT BE USED FOR INDUCTION COOKING 8 PREPARING AND USING THE INDUCTION COOKTOP uussseseeeee e nne 8 OPERATING THE INDUCTION COOKTOP 22 sse Ru REI RREGau n bred REDE YR Sedona ee Ec s 8 OVERVIEW OF ERROR MESSAGES 54 ix dom beacus
5. ace ingredients into cookware suitable for induction cooking Place the cookware on the induction cooktop OPERATING THE INDUCTION COOKTOP 1 2 1 3 TURNING ON THE INDUCTION COOKTOP Turn on the induction cooktop by pressing the ON OFF button ON turned on will appear on the display Press the MENU button The induction cooktop automatically detects whether the cookware located on the cooktop is suitable for induction cooking If the correct type of cookware is located on the hotplate the induction cooktop will start heating at the preset power level of 1600 W The display will show 1600 and the fan will start running If you remove the cookware from the induction cooktop the display will show the error message EO and a sound will be made After a while the cooktop will switch to the stand by mode Copyright 2013 Fast R a s Revision 08 2013 1 4 2 2 4 2 4 3 5 2 5 3 Induction Cooktop SCP 3201GY If cookware unsuitable for induction cooking is placed on the induction cooktop then heating will not start after the MENU button is pressed and the display will show the error message E0 and a sound will be made After a while the cooktop will switch to the stand by mode SETTING THE POWER LEVEL When the induction cooktop is started for the first time the power level is automatically set to 1600 W If the power level display indicator is lit on the control panel use the control dial to set the require
6. aired at an authorised service centre e n no case should you attempt to repair the appliance yourself do not make any alterations to it danger of injury by electric shock Tampering with the appliance during the warranty period may void the warranty policy e The manufacturer is not responsible for damages caused by incorrect use of this product injuries burns fires food spoilage etc e People using a cardiac pacemaker should only use this appliance after consulting their attending physician RADIO WAVE INTERFERENCE The use of the induction cooktop may cause interference to your radio television or similar receivers The interference may be eliminated or limited by the following measures e Redirecting the radio or television signal reception antenna e Moving the induction cooktop further away from the receiver e Connection of the induction cooktop to a different power socket with its own independent electrical circuit EN 5 Copyright 2013 Fast CR a s Revision 08 2013 Induction Cooktop SCP 3201GY DESCRIPTION OF THE INDUCTION COOKTOP Cooktop with a 167 mm hotplate ON OFF touch button Fan and air exhaust vent on the underside of the appliance Digital display Indication of the power level display mode temperature and timer MENU touch button Control dial Copyright 2013 Fast R a s Revision 08 2013 Induction Cooktop SCP 3201GY DESCRIPTION OF THE
7. d power level in the range 200 to 1800 W If a different indicator is lit on the control panel first use the MENU button to switch to the power level display mode and then use the control dial to set the power level SETTING THE TEMPERATURE Using the Menu button switch the display to the temperature display mode The temperature display mode indicator will be lit on the control panel When the induction cooktop is started for the first time the temperature is automatically set to 240 C Using the control dial select the desired temperature in the range 60 240 C SETTING A COMBINATION OF A POWER LEVEL AND THE AUTOMATIC SHUT OFF TIMER Press the MENU button repeatedly until the power level display mode and the automatic shut off timer are shown at the same time 0 00 will appear on the display Using the control dial set the automatic shut off time in the range 1 minute to 3 hours Turn the control dial to increase or decrease the automatic shut off time by 1 minute The set time will flash on the display for 5 seconds and the then the display will switch to the power level display mode The power level is preset to 1600 W The power setting can be changed using the control dial Until the automatic shut off of the induction cooktop the remaining time until automatic shut off and the set power level will alternate on the display While the time is counting down the set power level can be changed using the control dial as necessary At the e
8. e ceeds BUR de Rd DIR eS n bonn et d 10 MAINTENANCE AND CLEANING seseeeeeee ee 11 TECHNICAL SPECIFICATIONS 53 5 iran eee SCR RR bor RR ERES 11 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS 12 DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT 5 tnr ER n ees T2 EN 2 Copyright 2013 Fast CR a s Revision 08 2013 SCP 3201GY IMPORTANT SAFETY INSTRUCTIONS e This appliance may be used by children 8 years of age and older and by per sons with physical or mental impair ments or by inexperienced persons if they are properly supervised or have been informed about how to use of the product in a safe manner and un derstand the potential dangers Do not allow children to play with the appli ance Cleaning and maintenance must not be performed by children unless they are older than 8 years of age and under supervision Keep this appliance and the power cord out of reach of children that are younger than 8 years of age Copyright 2013 Fast CR a s Revision 08 2013 Induction Cooktop SCP 3201GY IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND STORE FOR FUTURE USE e Before connecting the appliance to a power socket check that the technical details on the appliance s rating label match the electrical voltage in the socket to which you wish to connect the appliance Attention This appliance is not designed to be controlled
9. ion centre for further details The improper disposal of this type of waste may fall subject to national regulations for fines For business entities in the European Union If you wish to dispose of an electrical or electronic device request the necessary information from your seller or supplier Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller This product meets all the basic EU regulation requirements that relate to it EN 12 Copyright 2013 Fast R a s Revision 08 2013
10. ll be shown on the display and the induction cooktop will be in stand by mode Disconnect the induction cooktop from the power socket Copyright 2013 Fast CR a s Revision 08 2013 Induction Cooktop SCP 3201GY Note For safety reasons the induction cooktop will turn off automatically after two hours of operation if you do not press any button or perform any setting using the control dial After being turned off the fan will run for a short time to speed up the cooling of the cooktop Do not disconnect the cooktop from the power socket before the fan stops running OVERVIEW OF ERROR MESSAGES If an error message appears on the display follow the instructions in this table Error message Possible cause of the error Solution The display shows error There is not cookware placed on Place cookware suitable for message EO the hotplate or the cookware induction cooking on the hotplate is not suitable for induction see chapter Types of cookware cooking suitable for induction cooking The display shows error Temperature sensor failure Send the induction cooktop to an message E1 or E2 authorised service centre for repair The display shows error The voltage in the power socket Connect the induction cooktop to message E3 or E4 to which the induction cooktop a corresponding power socket with is connected is too high or too a voltage of 220 240 V low The display shows error Overheating of the hotplate Allow the hot
11. nd of the set automatic shut off time a sound is made and the induction cooktop turns itself off OFF turned off is shown on the display indicating that the induction cooktop is in the stand by mode SETTING A COMBINATION OF A TEMPERATURE AND THE AUTOMATIC SHUT OFF TIMER Press the MENU button repeatedly until the temperature display mode and the automatic shut off timer are shown at the same time 0 00 will appear on the display Using the control dial set the automatic shut off time in the range 1 minute to 3 hours Turn the control dial to increase or decrease the automatic shut off time by 1 minute The set time will flash on the display for 5 seconds and the then the display will switch to the temperature display mode The temperature is preset to 240 C You can change the temperature setting using the control dial Until the automatic shut off of the induction cooktop the remaining time until automatic shut off and the set temperature will alternate on the display While the time is counting down the set temperature can be changed using the control dial as necessary At the end of the set automatic shut off time a sound is made and the induction cooktop turns itself off OFF turned off is shown on the display indicating that the induction cooktop is in the stand by mode TURNING OFF THE INDUCTION COOKTOP When you have finished using it turn off the induction cooktop by pressing the ON OFF button OFF turned off wi
12. plate to cool down message E5 Then you can put into operation again The display shows error The thermal fuse was activated Allow the induction cooktop to cool message E6 turning off the induction down cooktop due to overheating and make sure that the air inflow or exhaust vent is not blocked If the problem persists send the induction cooktop to an authorised service centre for repair EN 10 Copyright 2013 Fast R a s Revision 08 2013 Induction Cooktop SCP 3201GY MAINTENANCE AND CLEANING e Before cleaning always disconnect the appliance from the power socket and allow it to cool down e Wipe the surface of the hot plate and the control panel with a lightly damp cloth and then wipe dry e To remove hard to clean stains you may use a cloth dipped in a neutral cleaning agent solution After applying the cleaning agent wipe the surface with a lightly damp cloth and then wipe dry e Keep the induction cooktop clean Regularly remove dust and dirt from the area of the air inflow and exhaust vents For a more thorough clean you may use cotton buds e Do not use cleaning products causing abrasion petrol or solvents to clean the appliance To prevent potential injury by electric shock do not submerge any part of the appliance under water or any other liquid TECHNICAL SPECIFICATIONS Nominal voltage sen S E ee E 220 240 V Nominal TRS CUI CY EM E E 0 t o 00S TTE 50 Hz Rated power VU accra E o m 1800 W Adjustable
13. rmal losses and cooking on an induction cooktop is faster and consumes less energy COOKWARE SUITABLE FOR INDUCTION COOKING Cookware suitable for induction cooking must be made from a metal magnetisable conductive material cast iron enamelled steel stainless steel The bottom of the cookware must be flat and straight The bottom of the cookware that you wish to use on this induction cooktop should have a diameter of at least 12 cm The maximum diameter of the bottom of the cookware should be such that it does not exceed the cooking zone on the hotplate by more than 2 cm COOKWARE THAT CANNOT BE USED FOR INDUCTION COOKING Cookware made from aluminium copper ceramics porcelain or glass Cookware the bottom of which is bulging or curved Cookware with a bottom that has a diameter of less than 12 cm cannot be used with this induction cooktop PREPARING AND USING THE INDUCTION COOKTOP Before first use take the appliance and its accessories out of the packaging material Check that the hotplate of the induction cooktop is not damaged and that its surface is clean Always place the appliance on an even dry and stable surface Leave a free space of at least 10 cm around the induction cooktop and 50 cm above it to ensure sufficiently air circulation during operation Connect the induction cooktop to a power socket The connection to a working power socket is confirmed by a sound and OFF turned off will be shown on the display Pl
14. using a programmed device external timer switch or remote control This appliance is designed for household use Do not use the appliance for any other than its intended purpose Do not use the appliance in industrial surroundings or outdoors Do not place the appliance on or near an electrical or gas stove Do not place the appliance in the vicinity of an open flame or appliances that are sources of heat Do not use the appliance on metal surfaces such as for example the drip off area on the kitchen sink Always place the appliance on an even dry and stable surface e To prevent potential injury by electric shock do not submerge any part of this appliance under water or any other liquid e During operation of the appliance there needs to be sufficient area for air circulation above the appliance and on all its sides e Do not cover the air inflow and exhaust openings Otherwise the appliance may be damaged e Only use cookware suitable for induction cooking see chapter Types of cookware suitable for induction cooking e Do not heat up empty cookware Otherwise this may damage it e Liquids or meals may not be heated in closed containers such as for example cans because an explosion could result e Oils and fats may quickly overheat and catch on fire Pay special attention when heating them e Do not place credit cards watches or radios in the vicinity of the appliance so that they are not damaged by the magnetic field generated
Download Pdf Manuals
Related Search