SYBA SY-PEX40015 RAID controller
Contents
1. and Down Arrows and then Enter to choose the physical drive to be set Finally press Y to confirm 7 Press Ctrl E to exit Check for the status of the hard disks 1 Choose Logical Driver Info in the Main Menu of the BIOS 2 Press Up and Down Arrows to choose the hard disks and read their status in the Logical Driver column 3 Press Esc to exit to the Main Menu Installing Windows driver for the controller card 1 Turn on the computer 2 Once Windows is running a new controller is detected 3 When the Windows ask for its device driver insert the Drivers amp Utility CD into the CDROM assuming drive D and browse to the following path for the driver D silicon Image SIL3132RAID windows for BIOS with RAID function D silicon_Image sili3132 Windows for nor RAID BIOS If the hard disks installed are blank do not forget to set partition and format them before use If you are performing a new Windows NT 4 0 2000 XP 2003 or Vista installation to a SATA hard drive attached to the Serial ATAII controller card 1 Please copy all the directories and files in the floppy folder to the root directory of a floppy disk to create a pre install disk for Win2K WinXP Win2003 WinxXP Vista 2 Press F6 for third party SCSI or driver installation at the beginning of the text mode installation Insert the 1 44MB floppy diskette into the floppy drive Press S when setup asks if you want to specify an addit2. MM SA2PEX EN 200708 User Manual Introduction The Serial ATA II to PCI Express NCQ Host Controller Card is a high performance server class storage interface device which provides a multi port SATA generation II connectivity to minimize the host overhead and the host to device latency and it incorporates the lead edge latest NCQ hard disks With this NCQ feature the hard disks perform more efficient which means higher performance and longer lifetime of the hard disks Features O0 Support 1 lane x1 PCI Express with transfer rate 2 5Gb s O0 Compliant with PCI Express 1 0a specification 0 Support SATA II specification with transfer rate 3Gb s O0 Backward compatible to SATA 1 0a specification O0 Support hard disks with Native Command Queue NCQ O Capability to connect to a Port Multiplier with FIS based switching O Hot plugging supported O Support Raid 0 1 0 Raid 10 5 are supported if drivers are connected to a Port Multiplier O0 Windows98 98SE ME 2000 XP Vista supported Before the installation of the controller card let us make the following assumptions 1 The end users must have the basic knowledge of installing an internal device and its driver to a PC If they are not sure about their abilities or have and queries please call their local dealers immediately or find somebody who are experienced and qualified or assistance 2 The computer has been properly installed with our supported Windows operatin
3. g system Installing the controller card into the computer 1 Turn off your computer and all external devices connect to it 2 Disconnect your computer from the power sources 3 Open the computer case Refer to your computer user manual for more details 4 Find an available x1 PCI Express slot and remove the slot bracket Save the bracket screw for later use 5 Align the controller card horizontally with respect to the slot and insert it into the slot firmly and evenly Take card not to force it into the slot Once you have 1 Choose RAIDO OR RAID1 depending on your application RAIDO Striped combine two hard disk into one RAID 1 Mirrored make a copy of one hard disk to another 2 Choose Auto configuration if you are not familiar with the settings of RAID operation 3 Press Enter to choose the maximum size in the hard disk available or press Up and Down Arrows to alter the size in the hard disk to be configured as RAID function 4 Press Ctrl E to exit Install only ONE hard disk under a RAID supported BIOS Caution all data in the hard disks will be lost in the following procedures 1 Turn on the computer the BIOS on the controller card is executed 2 Press Ctrl S or F4 to enter into BIOS menu 3 Choose Create RAID set in the Main Menu 4 Choose CONCATENATON 5 Select 1 for only one hard disk to be installed 6 Press Enter if there is only one hard disk is installed or press UP
4. ional device 3 Press Enter to continue on with text mode setup 4 Follow the setup instructions to complete installing windows NT 4 0 2000 XP 2003 or Vista
Download Pdf Manuals
Related Search