Axis 5504-971 camera lense
Contents
1. Lens Replacement Instructions Instructions Follow these instructions to replace the lens In order to set the focus and position the lens the camera must be connected to the network For instructions please refer to the Installation Guide supplied with the camera Important Detaching attaching the lens with force may cause irreparable damage to the lens holder no force is needed Follow the instructions below to replace the lens Fig 1a Fig 16 on the following models l Camera unit AXIS 209FD Camera unit AXIS M3011 e AXIS M3011 installed in ceiling e AXIS 209FD Patea tee a at e AXIS 209FD R WO Ss _ ol FT i e AXIS 209FD R M12 lt Ta e AXIS 209MFD as e AXIS 209MFD R M12 SPLIT e AXIS 209MFD R t Dome cover e AXIS 209MFD R M12 i a e AXIS 209MFD R M12 SPLIT Som cover Note Applies to P N 0283 00X 08 or higher P N is located on the product label Replace the lens Follow these instructions to replace the lens 1 Remove the dome cover see FIG 1a and FIG 1b 2 Unlock the lens lock screw by turning it 180 counter clockwise Fig 2 3 Rotate the lens counter clockwise to detach it Fig 2 4 Carefully attach the new lens and be sure to insert it gently no force is needed Lens lock screw Set the focus In order to set the focus and position the lens the camera must be connected to the network For instructions please refer to the Installation Guide supplied with the camera After install2. ation follow the instructions below Note Due to the dome s refraction the image might appear slightly out of focus once the dome has been placed To compensate focus on an object slightly closer than the intended area E g for AXIS 209MFD 16MM lens rotate approximately 270 degrees counter clockwise before attaching the dome 1 Open the camera s Live View page in a web browser 2 To adjust the focus manually rotate the lens until the image on the Live View page is satisfactory 3 Gently lock the lens by turning the lens lock screw approximately 180 clockwise until it clicks in place Lens Replacement Instructions Position the lens 1 Open the Live View page in a web browser 2 Checking the image in the Live View page carefully move the lens to the desired position Replace the dome cover 1 Attach the dome cover 2 Using the supplied allen hex key gently tighten the 4 screws Fig 1a 1b The installation of the lens is now complete For more information on the functionality of the network camera please refer to the user documentation available from the Axis web site at www axis com or from the AXIS Network Camera CD supplied with the camera Important Attaching the lens with force may cause damage to the lens holder Part no 34588
Download Pdf Manuals
Related Search