Bosch WAQ283S1GB washing machine
Contents
1. Register your new Bosch now www bosch home com welcome Washing machine f WA en Instruction Manual and Installation Instructions Your new washing machine You have chosen a Bosch washing machine Please take a few minutes to read and become familiar with the advantages of your washing machine To meet the high quality demands required by Bosch every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and Is in perfect condition For more information on our products accessories replacement parts and services see our website www bosch home com or contact our after sales service centres lf the operating and installation instructions describe different models any differences will be pointed out at the relevant points in the text an Read these operating and installation instructions before switching on the washing machine Display rules A Warning This combination of symbol and signal word indicates a possibly dangerous situation Not heeding the warning can Cause death or injuries Caution This signal word indicates a possibly dangerous situation Not heeding the caution can cause property and or environmental damage Note tip Information about the optimum use of the appliance any other useful information 1 2 3 a b The steps are represented by numbers or letters a Lists are represented by a small2. Destroy the lock on the washing machine door Z Warning Risk of suffocation Children may become wrapped in packaging film or packing parts if allowed to play with them or they may pull them over their heads and suffocate Keep packaging film and packaging parts out of the reach of children Z Warning Risk of poisoning Detergents and care products may be poisonous if consumed Keep detergents and care oroducts out of the reach of children A Warning Eye skin irritation Detergents and care products may cause Irritation if they come into contact with the eyes or skin Keep detergents and care oroducts out of the reach of children Z Warning Risk of injury When you wash at high temperatures the glass in the os machine door gets ot Do not let children touch the hot washing machine door Environmental protection Packaging used appliance x Dispose of packaging in an environmentally responsible manner This appliance is labelled in accordance with European Directive 2012 19 EU concerning used electrical and electronic appliances waste electrical and electronic equipment WEEE The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU Tips on economical use m Always fill the appliance with the maximum amount of laundry for each programme Overview of programmes Supplementary sheet for the operating and i
3. Dyeing bleaching Dye should only be used in normal household quantities Salt may damage stainless steel Always follow the dye manufacturer s instructions Do not use the washing machine to bleach clothes Soaking 1 Pour soaking agent detergent into compartment Il according to the manufacturer s instructions 2 Turn the programme selector to the Cottons 30 C programme 3 Press the start button 4 After approx 10 minutes press the start button again to pause the programme 5 After the required soaking time press the start button again if the programme is to be continued or changed Notes m Load laundry of the same colour m No additional detergent is required the soaking solution is used for washing 10 Detergent Correct selection of detergent The care label is crucial for selecting the correct detergent temperature and treatment of the laundry gt See also www sartex ch Visit www cleanright eu to find further information on detergents care products and cleaning agents for domestic use Standard detergent with optical brighteners Suitable for heat resistant white laundry made from linen or cotton Select the Cottons cold max 90 C programme Detergent for colours without bleach or optical brighteners Suitable for coloured laundry made from linen or cotton Select the Cottons cold max 60 C programme Detergent for colours delicates without optical bright
4. Dose the detergents and care products according to m Water hardness Ask your water Supply company m The manufacturer s specifications on the packaging Ihe amount of laundry m soiling Page 9 Filling Z Warning Eye skin irritation Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation Open the drawer carefully Rinse eyes or skin thoroughly if they come into contact with detergent care oroducts lf swallowed accidentally seek medical advice Note Dilute viscous fabric softener and fabric conditioner with water this orevents blockages Pour the detergent and care products into the appropriate compartments Measuring aid A For liquid detergent Compartment Il Detergent for the main wash water softener bleach stain remover Compartment amp Softener starch do not exceed the maximum Compartment Detergent for prewash 1 Pull out the detergent drawer as far as possible 2 Add detergent and or care products 3 Close the detergent drawer Operating the appliance en Measuring aid for liquid detergent Depending on the model Position the measuring aid for measuring liquid detergent 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 Slide the measuring aid forwards fold it down and click it into place 3 Reinsert the drawer Note Do not use the measuring aid for g
5. Note You can find possible programme default settings in the overview these differ depending on the model The programme default settings for all programmes are preset at the factory and are displayed in the display panel after the programme is selected Spin speed Centrifug Spin Depending on the programme progress you can change the spin speed in rom revolutions per minute before and during the programme To do this press the spin speed button repeatedly until the required spin speed is displayed in the display panel The maximum speed that can be selected depends on the model and programme that has been selected Setting w Rinse hold The laundry remains in the water after the final rinse to prevent creasing if the laundry will not be taken out of the washing machine immediately 11 en Additional programme settings Ready in time Before starting the programme the programme end Ready in time can be preselected in hourly increments h hours up to a maximum of 24 hours 1 Select the required programme Note The programme duration is displayed in the display panel 2 Press the Ready in button repeatedly until the required number of hours is displayed in the display panel 3 Press the Start button The set Ready in time is now active The selected programme starts automatically and ends after the selected number of hours After the programme has started the programme duratio
6. m In addition to the safety information listed here the local water and electricity supplier may have special requirements m lf in doubt have the appliance connected by a specialist Installation surface Note The washing machine be stable so that it does not move around m The installation surface must be firm and level m soft floors floor coverings are not Suitable 26 Installation on a base ora wooden joist floor Caution Damage to the appliance The washing machine may wander and tio topple from the base when spinning Use holding brackets to secure the feet of the appliance Order no WMZ 2200 WX 975600 Note On wooden joist floors install the washing machine m In a corner if possible On a water resistant wooden board min 30 mm thick which is screwed tightly to the floor Installation on a platform with drawer Platform order no WMZ 20490 WZ 20490 Installing the appliance in a kitchenette Z warning Risk of death There is a risk of electric shock if you touch live components Disconnect the appliance from the power supply Notes m Recess width of 60 cm required m Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets If you remove the appliance covering plate for installation underneath the worktop or fitted in a cabinet you must replace it with a metal cover Order no WMZ20331 WZ20331 Remov
7. Damage to the appliance Cleaning agents that contain solvents e g cleaning solvent can damage Surfaces and components in the machine Do not use cleaning agents that contain solvents Machine housing control panel m Wipe the housing and the control panel with a soft damp cloth m Remove the detergent residue immediately Do not clean with a water jet Cleaning and maintenance en Drum Use chlorine free cleaning agents and not steel wool Descaling Descaling should not be necessary if the detergent is measured out correctly However if it is required follow the manufacturer s instructions for the descaling agent Suitable descalers can be obtained via our website or from our after sales service Detergent drawer and housing If the washing machine contains detergent or fabric softener residues 1 Pull out the detergent drawer Press down the insert and fully remove the drawer 2 To remove the insert Push the insert upwards from below with your finger 3 Clean the detergent dispenser tray and insert with water and a brush and dry it Clean the inside of the housing as well 4 Fit the insert and lock it in place push the cylinder onto the guide pin 5 Push in the detergent drawer Note Leave the detergent drawer open so that any residual water can evaporate 19 en Cleaning and maintenance Detergent solution pump blocked Warning Risk of scalding Washing water is
8. Empty programme The drain hose at the siphon is blocked 1 Switch off the appliance Disconnect the mains plug 2 Loosen the hose clamp Carefully remove the drain hose residual water may leak out 3 Clean the drainage hose and siphon connecting piece 4 Reattach the drainage hose and secure the connection using the hose clamp Filter in the water supply blocked For this first reduce the water pressure in the supply hose 1 Turn off the tap 2 Select any programme except Rinse Spin Empty 3 Press the Start button Allow the programme to run for approximately 40 seconds 4 Set the programme selector to the Off position Remove the mains plug 5 Clean the filter on the water tap Remove the hose from the water tap Clean the filter with a small brush r r SS B 6 For standard and Aqua Secure models clean the filter on the rear of the appliance Faults and what to do about them en Remove the hose from the rear of the appliance Remove the filter using pliers and clean the filter 4 A eed A ANS 7 Connect the hose and check for leaks Faults and what to do about them Emergency release E g in the event of a power cut The programme continues running when the power supply is restored However if the laundry has to be removed the washing machine door can be opened as follows Z Warning Risk of sc
9. Va eo a a You can find this information After sales service depending on the model On the inside of the washing machine If you cannot correct the fault yourself door in the opened service flap and see section Faults and what to do on the rear of the appliance about them gt Page 21 please contact our after sales service Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers Please give the after sales service the product number E no and the production number FD of the Trust the expertise of the manufacturer Contact us for assistance By doing so you will ensure that the repairs are carried out by trained service personnel using genuine spare parts appliance E N FD Product number Production number 24 Technical data en Technical data Nominal power 2300 W Dimensions Water pressure 60 x 55 x 85 cm 100 1000 kPa 1 10 bar width x depth x height Depending on the model Weight Power consumption when switched 66 73 kg off 0 17 W Mains connection n ti h age l ower consumption when ready for Nominal voltage 220 240 V 50 Hz use left on mode Nominal current 10 A 13 A 2 00 W Positioning and connecting Included with the appliance Note Check the machine for transport damage Never use a damaged machine If you have any complaints contact the dealer from whom you purchased the applia
10. indicated on the washing machine rating plate are the same The connected load and fuse required are specified on the rating olate he washing machine is only connected to an alternating current via a properly installed earthed socket m Ihe mains plug fits the socket m Ihe cable cross section is adequate m The earthing system is properly installed Ihe mains cable is only replaced by a qualified electrician if this is necessary Replacement mains cables are available from the after sales service No multiple plugs couplings or extension cables are used m lf an earth leakage circuit breaker is used only a type which displays this symbol is used Ax Only this symbol guarantees compliance with the currently applicable regulations m he mains plug can be accessed at all times m he mains cable is not bent squashed modified cut through or in contact with heat sources Before washing for the first time The washing machine was thoroughly tested before leaving the factory In order to remove any water which may be left over from the test run the first washing cycle without any laundry Notes m The washing machine must be correctly installed and connected from Page 25 m Never use a damaged machine Inform your after sales service Check the machine Plug in the mains plug Turn the tap on Close the washing machine door do not load any laundry Select the Cottons programme
11. Adding laundry After starting the programme you can add or remove laundry 1 Press the Start button to pause the programme The Start button indicator lamp flashes and the machine checks whether it is possible to add laundry Note Do not leave the washing machine door open for too long when adding laundry as water from the laundry may leak out lf the following appears in the display panel YES lights up it is possible to add laundry 16 NO flashes wait until YES lights Up Only open the washing machine door if YES is lit up NO lights up it is not possible to add laundry For safety reasons the washing machine door remains locked when the water level or temperature is high or while the drum is rotating and it is not possible to add laundry during this time 2 To continue the programme press the Start button again Changing the programme 1 Press the Start button to pause the programme 2 Select a different programme 3 Press the Start button again The new programme starts from the beginning Cancel the programme 1 Press the Start button to cancel the programme 2 To cool the laundry Set the programme to Rinse 3 Press the Start button again The rinse programme starts After the programme has ended you can remove the laundry Programme end Li appears in the display panel and the Start button indicator lamp is off If the amp symbol also appears in the disp
12. and 90 C as the temperature Open the detergent drawer Pour approx 2 litre of water into compartment Il Pour standard detergent into compartment Il Note Prevent foaming by only using half of the amount of detergent recommended by the detergent manufacturer Do not use detergent for wool or delicates 9 Close the detergent drawer 10 Press the Start button 11 When the programme ends switch off the appliance Your washing machine is now ready to use o one P PODR Transportation e g when moving home Preparatory work 1 Turn off the water tap 2 Reduce the water pressure in the supply hose Maintenance filter in the water supply Page 21 Positioning and connecting en 3 Drain the remaining detergent solution Maintenance detergent solution pump blocked gt Page 20 4 Disconnect the washing machine from the mains 5 Remove the hoses Installing the transport locks 1 Remove the covers and keep ina Safe place lf required use a screwdriver 2 Insert all four sleeves Clamp the mains cable on the holders Insert and tighten the bolts Before commissioning Notes Ihe transport locks must be removed m lo prevent unused detergent from flowing straight into the drain during the next wash Pour approx 2 litre of water into compartment Il and start the Abpumpen Empty programme 31 Aqua Stop warranty Only for appliances with Aqua S
13. box or a dash Contents Intended use 4 Safety instructions 5 Electrical safety nannaa aana aa 5 Risk of INnjUTY n on annaa aaa 5 Safety for children 0 5 Environmental protection 6 Packaging used appliance 6 Tips on economical use 6 Getting to know the appliance 7 Washing machine 005 T Control panel 0 ss e82 4004 2 5 aaa 8 Display panel 000 eee 8 LAUNAY s cons dees id ee edae cde 9 Prepare the laundry 4 9 Sorting laundry eden rane ed eae 9 ICHIGO Fener dea faa EE E 10 Dyeing bleaching 10 Soaking sa 0 545 de ate se aa ope ee 10 Detergent 2000008 10 Correct selection of detergent Saving energy and detergent 11 Programme default settings 11 Spin SUCCC so seus be tee ede See es 11 Ready intime 00 ee eae 12 Additional programme BING Sos bec sessersbeee assertenmcorierasneesanet 12 Speed Perfect O 12 PCO Penfel 2 454 twd ter Erna 12 Rinse pluS 0 0000 eee 12 Water Plus 0 000008 12 EASy ON ae ee a 12 Sy Operating the appliance Preparing the washing machine select programme switch on the appliance Change the programme default settings Placing laundry into the drum Measure and add detergent and care productS 0 Start the programme Childproof
14. hot when washing at high temperatures If you come into contact with the hot detergent solution you may be scalded Allow the detergent solution to cool down 1 Turn off the water tap so that no more water can flow in and has to be drained via the detergent solution ump p 2 Switch off the appliance and pull out the mains plug 3 Open and remove the service flap 4 Fold out the water gutter in front of the pump cover Remove the drainage hose from its holder and remove the sealing cap Allow the detergent solution to flow out into a suitable container Replace the sealing cap on the drainage hose and place the drainage hose back in the retainer 20 Without the drainage hose Carefully turn the pump cover once through 180 but do not remove it The water now runs out of the detergent solution pump Repeat the process until no more detergent solution flows out 6 Now carefully unscrew the pump cover Residual water may run out Clean the interior pump cover thread and pump housing The impeller in the detergent solution pump must be able to rotate Refit the pump cover and screw it on tightly The handle should be vertical 7 Fold in the water gutter 8 Place the service flap back on lock it into place and close it o Note To prevent unused detergent from flowing straight into the drain during the next wash Pour 2 litre of water into compartment Il and start the
15. lock Adding laundry 0000 Changing the programme Cancel the programme Programme end Removing laundry switching off the appliance Sensors Automatic load sensing Unbalanced load detection system 0000 ee Ei Setting the signal x Cleaning and maintenance Machine housing control panel PM ret dene ae ts 2 ones tera ee E Descaling Detergent drawer and housing Detergent solution pump DIOCKEO 6h os oi8eadds aaw The drain hose at the siphon is blocked Filter in the water supply blocked Faults and what to do about them 0 000 Emergency release 0 Information on the display panel Faults and what to do about them en en Intended use Q l After sales service Technical data Positioning and connecting Included with the appliance Safety instructions Installation Surface Installation on a base or a wooden joist floor Installation on a platform with drawer Installing the appliance in a kitchenette Removing the transport locks Hose and cable lengths Walerinlel es eara ria oor bat ack we ce Water OUUCT i aa we de ka t s ve wn Levelling 0 0 eee eee eee Electrical connection Before washing for the first time Transportation 0008 Intended use For private domestic use only m Ihe w
16. machine using cold mains water a With a hot water connection operate the washing machine with hot and cold mains water with a maximum temperature of 60 C Do not connect the machine to the mixer tap of an unpressurised hot water boiler Do not use a used supply hose Only use the supply hose supplied or one that was purchased from an authorised specialist retailer m Do not bend squash modify or cut through the water supply hose otherwise its strength is no longer guaranteed m Only tighten the screw connections by hand If the screw connections are tightened too much with a tool pliers the thread may become damaged Optimum water pressure in the supply network At least 100 kPa 1 bar 28 Maximum 1000 kPa 10 bar When the tap is open the water flow is at least 8 min lf the water pressure is higher than this a pressure reducing valve must be installed Hot and cold water connection Note Red hot water supply hose on the hot water tap and red valve on the appliance Cold water supply hose on the cold water tap and white valve on the appliance Connection to the water pipes 4 26 4 mm Cold water connection only lf no hot water connection is present only connect the cold water inlet hose and cover the hot water connection on the appliance so that it is kept free of dirt Note Carefully turn on the tap and check that the connection point
17. washing machine door the components may break off and cause injuries Do not lift the washing machine by protruding parts a lf you climb on the washing machine the worktop may break and cause injuries Do not climb onto the washing machine a lf you lean on the washing machine door when it is open the washing machine may tip over and cause injuries Do not lean on the washing machine door when it is open Safety instructions en a Reaching into the drum when it is turning can cause injuries to hands Do not reach into the drum when it is turning Wait until the drum has stopped turning Z Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot water e g if hot water is being drained into a wash basin Do not reach into the hot detergent solution Safety for children A Warning Danger of death If children play with the washing machine they may get into life threatening situations or injure themselves Do not leave children unattended near the washing machine Do not let children play with the washing machine A Warning Danger of death Children may lock themselves in appliances putting their lives at risk For appliances that have a the end of their service life a Disconnect the mains plug en Environmental protection a Cut through the mains cable and remove it along with plug
18. abric softener with litre water and pour into com partment II Not for outdoor fabrics sportswear fabrics or those made with down Reduce detergent dosage for the next wash cycle 23 en After sales service Faults Cause remedial action Intense noise vibrations Appliance levelled Level the appliance and wandering during m Appliance feet fixed Secure the appliance feet spinning m Transport locks removed Remove the transport locks Display panel indicator m Power failure lights do not function m Circuit breakers tripped Switch on replace the circuit breakers while the appliance isrun m Ifthe fault occurs repeatedly call the after sales service ning Detergent residue onthe m Occasionally phosphate free detergents contain water insoluble residue laundry m Select the rinse programme or brush the laundry after washing NO appears in the display Water level too high Not possible to add laundry Close the washing machine panel in reload mode door immediately if necessary Press the Start button to continue the programme YES appears inthe dis The washing machine door is unlocked It is possible to add laundry play panel in reload mode If you cannot correct a fault yourself after switching on off or a repair is required m set the programme selector to the Off position Appliance is switched off m Unplug the mains plug from the socket m urn off the water tap and call the after sales service
19. alding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot detergent solution and laundry If possible leave it to cool down Z Warning Risk of injury You may injure your hands if you reach into the drum while it is rotating Do not reach into the drum while it is rotating Wait until the drum has stopped rotating Caution Water damage Any escaping water may cause water damage 21 en Faults and what to do about them Do not open the washing machine door if water can be seen through the glass 1 Set the programme selector to the Off position Remove the mains plug 2 Drain the water Pull the emergency release downwards with a tool and release The washing machine door can then be opened Information on the display panel Display Cause remedial action YES The washing machine door is unlocked It is possible to add laundry NO m Duetothe high temperature in the drum the washing machine door cannot be opened Wait until the temperature drops m Due tothe high level of water in the drum the washing machine door can not be opened Drain the water e g select the Spin or Empty programme if only a drain cycle is required set rom spin speed to w Rinse hold without final spin selected E16 Laundry may become trapped Close the washing machine door properly E m urn onthe cold water tap fully E 29 m supply hose kinked or trapped m Water p
20. ashing machine is suitable for washing machine washable fabrics and hand washable wool in detergent solution m To be operated with cold mains water or cold and hot mains water max 60 C and standard detergents and care products which are Suitable for use in washing machines m When measuring the amount of all detergents additives care products and cleaning agents always follow the manufacturer s instructions m he washing machine may be used by children over the age of 8 years old and by persons with reduced physical sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person Children must not carry out any cleaning or maintenance work without Supervision m Keep pets away from the washing machine Read the Instruction Manual and Installation Instructions and all other information supplied with the washing machine and use the machine accordingly Retain the documents for subsequent use Depending on the model Safety instructions Electrical safety A Warning Danger of death There is a risk of electric shock if you touch live components Never touch or hold the mains plug with wet hands a Only pull out the mains cable by the plug and never by the cable as this could damage it Risk of injury Z Warning Risk of injury a When the washing machine is lifted by its protruding parts e g the
21. bre m Colour Note Laundry may discolour or not be cleaned correctly Wash white and coloured items separately Wash new bright fabrics separately the first time you wash them Laundry en Solling Wash laundry with the same level of soiling together Examples of levels of soiling Light Do not prewash if necessary select the additional programme setting SpeedPerfect Normal Heavy Load less laundry select a programme with prewash Stains Remove pretreat stains while they are fresh First dab the stain with soapy water do not rub Then wash the items of laundry with the appropriate programme Stubborn or dried in stains can sometimes only be removed by washing several times Symbols on the care labels The numbers in the symbols indicate the maximum washing temperature that may be used Suitable for a normal washing process e g Cottons programme A gentle washing process Is required e g Easy Care programme W An especially gentle washing process is required e g Delicate Silk programme yw Suitable for washing by hand e g Wool programme 7 Do not wash the laundry in the machine en Detergent Starching Note Laundry must not be treated with fabric softener Starching is possible in all wash programmes if liquid starch is used Measure starch into compartment amp in accordance with the manufacturer s instructions clean first if necessary
22. d information Start button for starting interrupting e g to reload laundry and cancelling a programme Programme default settings Spin speed and Ready in time Changing the programme default settings gt Page 11 Display panel Note The table shows possible setting options and information in the display panel these differ depending on the model Setting options and information for the selected programme w Rinse stop 1400 Spin speed in rom revolutions per minute w Rinse stop 1 30 Programme duration Depends on the programme selection in h min hours minutes 1 24h Ready in time Programme ends after h h hours 8 0 kg Max load in kg kilograms LL Childproof lock Laundry Prepare the laundry Caution Damage to the appliance fabrics Foreign objects e g coins paper clips needles nails may damage the laundry or components in the washing machine Therefore note the following tips when preparing your laundry m Empty pockets m Look out for metal items paperclips etc and remove them m Wash delicates in a laundry bag tights underwired bras etc m Close any zips button up any cover buttons m Brush sand out of pockets and collars m Remove curtain fittings or place Curtains in a laundry bag Sorting laundry sort your laundry according to the care instructions and manufacturer s information on the care labels depending on Type of fabric fi
23. e end of the drain hose is not immersed in the drained water The water drains away quickly enough Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24 40 mm available from specialist dealers 29 en Positioning and connecting Outlet into a plastic pipe with rubber bushing or into a drainage pit Levelling Level the appliance using a spirit level Incorrect levelling may result in intense noise vibrations and wandering 1 Loosen the lock nuts using a wrench by turning it in a clockwise direction 2 Check the alignment of the washing machine with a spirit level and adjust it if necessary Change the height by turning the appliance feet All four appliance feet must stand firmly on the ground 3 Tighten the lock nut against the housing In doing so hold the foot tight and do not adjust its height The lock nuts on all four appliance feet must be screwed tightly against the housing 30 Electrical connection Z Warning Danger of death There is a risk of electric shock if you touch live components m Never touch or hold the mains plug with wet hands m Only pull out the mains cable by the plug and never by the cable as this could damage it m Never unplug the mains plug during operation Observe the following information and ensure that Notes m Ihe mains voltage and voltage
24. el detergents and washing powder or for programmes with prewash or when the Ready in time is selected For models without a measuring aid pour the liquid detergent into the appropriate dispenser and place it in the drum Start the programme Press the Start button to start the programme During the programme the display panel shows the Ready in time or after starting the wash programme the programme duration and the symbols for the programme progress Display panel Page 8 Note To secure the programme against being inadvertently adjusted select the childproof lock 15 en Operating the appliance Childproof lock Prevent the set functions of the washing machine from being accidentally changed by activating the childproof lock when the programme has started To activate the childproof lock press and hold the Start button for approx five seconds LL appears in the display panel and then goes out again after a few seconds To deactivate the childproof lock press and hold the Start button for approx five seconds Notes LL lights up The childproof lock is active and the programme selector has been adjusted To prevent the programme from stopping turn the programme selector back to the original programme m he childproof lock remains active after the programme has ended and the appliance is switched off You must always deactivate the childproot lock if you want to start a new programme
25. eners Suitable for coloured laundry made from easy care fibres synthetic fibres Select the Easy Care cold max 60 C programme Mild detergent Suitable for delicate fine fabrics silk or viscose Select the Delicate Silk cold max 40 C programme Detergent for woollens Suitable for woollen fabrics Select the Wool cold max 40 Cprogramme Saving energy and detergent For light and normal soiling you can save energy lower washing temperature and detergent Saving Soiling note Reduced temper Light ature and deter No visible dirt or stains Cloth gent quantity as ing has taken on some body per the recom odour g mended dosage m Light summer sports clothing worn for a few hours m shirts shirts blouses worn for up to one day m Guest bed linen and hand towels used for one day Normal Visible dirt or a few light stains g m shirts shirts blouses sweat soaked worn a few times m Towels bedding used for up to one week Temperatureas Heavy per the care label Dirt and or stains clearly visi and detergent ble e g tea towels baby quantity as per items work clothing the recom mended dosage for heavy soiling Note When measuring the amount of all detergents additives care products and cleaning agents please always check the manufacturer s instructions and information gt Page 14 Programme default settings en Programme default settings
26. formation for the selected programme appear in the display panel m Ihe programme duration m Ihe preset spin speed and m he maximum load 13 en Operating the appliance Placing laundry into the drum Z Warning Risk of death Items of laundry pretreated with cleaning agents that contain solvents e g stain remover cleaning solvent may cause an explosion after being loaded into the washing machine Hand rinse these items of laundry thoroughly beforehand Notes Mix items of laundry of varying sizes Laundry items of different sizes distribute themselves better during the spin cycle Individual items of laundry may lead to imbalances m Observe the maximum specified load Overfilling has a negative impact on the washing result and promotes creasing 1 Unfold presorted items of laundry before placing them in the washing drum 2 Make sure that no items of laundry are trapped between the washing machine door and the rubber seal and close the door 14 Measure and add detergent and care products Caution Damage to the appliance Cleaning agents and agents for pretreating laundry e g stain removers orewash sprays etc may cause damage if they come into contact with the surfaces of the washing machine Do not allow these agents to come into contact with the surfaces of the washing machine lf necessary immediately wipe away spray residue and other residues droplets with a damp cloth Measuring
27. h replace the drain hose correctly Tighten the screw connection on the supply hose Start button not pressed Tap not open Filter blocked Clean the filter supply hose kinked or trapped Safety function active Stop programme w Rinse hold without final spin selected Can be opened by emergency release only otart button for a pause or Ready in time pressed Washing machine door closed Childproof lock active Deactivate w Rinse hold without final spin selected Clean the drain pump Clean the waste pipe and or drain hose Not a fault water below the visible area m Nota fault the unbalanced load detection system has interrupted the spin because the laundry is unevenly distributed Distribute small and large items of laundry in the drum m selected speed too low Not a fault the unbalanced load detection system is adjusting the imbalance m Nota fault unbalanced load detection system adjusts imbalance by repeatedly distributing the laundry m Nota fault foam detection system active a rinse cycle is switched on Not a fault the programme sequence is optimised for the specific washing process This may result in changes to the programme duration in the display field m Nota fault the effect of the care product is not affected m Clean the insert if necessary Run the Cottons 90 C programme without laundry Use standard detergent for this Too much detergent used Mix one tablespoontul of f
28. ing the transport locks Caution Damage to the appliance The machine is secured for transportation using transport locks If the transport locks are not removed the drum for example may become damaged when the machine is operated Before using the appliance for the first time make sure that you completely remove all four transport locks Keep the locks in a safe place To prevent transport damage from occurring if the appliance is moved at a later date you must refit the transport locks before transporting the appliance Note Keep the screws and sleeves in a safe place 2 Unscrew and remove the bolts from all four transport safety devices Remove the sleeves To do this remove the mains cable from the holders Positioning and connecting Hose and cable lengths m Left hand connection en WO 00 Xew 27 en Positioning and connecting Tip The following are available from specialist dealers after sales service m Extension for Aqua Stop and cold water supply hose approx 2 50 m Order no WMZ2380 WZ10130 m A longer supply hose approx 2 20 m for standard model Water inlet Warning Risk of death There is a risk of electric shock if you touch live components Do not immerse the Aqua Stop safety valve in water it contains an electric valve Observe the following when connecting the machine Notes With a cold water connection only operate the washing
29. ith very soft water or for an even better rinsing result Water Plus Increased water level and additional rinse cycle extended washing time For areas with very soft water or for an even better rinsing result Easy iron Facil w Anti crease menos For gentle final spin with subsequent fluffing Residual moisture in the laundry is slightly increased Operating the appliance en 2 Change the programme 4 Y Operating the default settings appliance You can change the programme default settings Preparing the washing To do this repeatedly press the machine required button for the programme default settings until the required setting Note The washing machine must be is displayed in the display panel Then correctly installed and connected press the Start button to start the From Page 25 programme 1 Plug in the mains plug The programme default settings are not 2 Turn the tap on saved when the appliance is switched 3 Open the washing machine door off 4 Check that the drum is completely Programme default settings drained Drain if necessary Page 11 Select programme switch on the appliance Note If you have activated the childproof lock you must first deactivate it before you can set a programme Page 16 Use the programme selector to select the required programme Can be rotated in either direction The appliance is switched on The programme default settings and loading in
30. lay panel the washing machine has detected too much foam during the wash programme and automatically switched on a rinse cycle to remove the foam Note Add less detergent for the next washing cycle with the same load Removing laundry switching off the appliance 1 Open the washing machine door and remove the laundry Notes f you cannot open the washing machine door the appliance is still locked Wait until the programme ends lf the display panel does not light up energy saving mode is active To activate select any button 2 Set the programme selector to the Off position The appliance is switched off 3 Turn off the tap Note Not required for Aqua Stop models Notes Do not leave any items of laundry in the drum They may shrink in the next wash or discolour another item m Remove any foreign objects from the drum and the rubber seal risk of rusting m Leave the washing machine door and detergent drawer open so that any residual water can dry away Sensors en Sensors Automatic load sensing The automatic load sensing function adapts the water consumption ideally to each programme depending on the type of fabric and the load Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping drum spinning If the laundry is extremely unevenly distribu
31. n e g 2 30 hours minutes is displayed in the display panel Adding laundry after the Ready in time is active 1 Press the Start button 2 YES lights up in the display panel The washing machine door can be opened and laundry can be added 3 Close the washing machine door 4 Press the Start button again The preselected time continues to run G Additional programme settings Note You can find possible additional programme settings in the overview these differ depending on the model Speed Perfect O O Speed Perfect Turbo Perfect Washes in a shorter time but with a washing outcome comparable to that of the programme without selecting the additional Speed Perfect programme setting 12 Note Do not exceed the maximum load for the programme See the Supplementary sheet for the operating and installation instructions programme overview Eco Perfect Eco Perfect lt _ Energy optimised washing by reducing the temperature with a washing Outcome comparable to that of the programme without selecting the additional Eco Perfect programme setting Note In this programme the washing temperature is lower than the selected temperature thanks to energy efficient washing For special hygiene requirements it is recommended that a higher temperature or the additional programme setting for Eco Perfect be selected Rinse plus Extra Rinse plus extra Extra rinse For areas w
32. nce or our after sales service O M yew E es ERRA NN i it es l In addition a hose clamp 24 40 mm 1 na Be A Mains cable diameter available from specialist Water drainage dealers is required to connect the Water supply hose water drain hose to a siphon Covers for the transport locks Useful tools m Spirit level for levelling m Spanner with WAF 18 for loosening the depending on model transport locks and WAF 17 for aligning the appliance feet Elbow for securing the water drain hose 25 en Positioning and connecting Safety instructions Warning Risk of injury Ihe washing machine is very heavy Be careful when lifting transporting the washing machine m When the washing machine is lifted by its protruding parts e g the washing machine door the components may break off and Cause injuries Do not lift the washing machine by protruding parts m Ifthe hose and mains cables are not routed properly there is a risk of tripping and injury Lay hoses and cables in such a way that there is no risk of tripping Caution Damage to the appliance Frozen hoses may rip burst Do not install the washing machine in areas exposed to frost or outdoors Caution Water damage The connection points for the water Supply hose and water drain hose are under high water pressure To prevent leaks and water damage you must follow the instructions in this section Notes
33. nstallation instructions m Wash normally soiled laundry without a prewash m Ihe selectable temperatures apply to the care labels on the textiles The temperatures in the machine may deviate from this so that you get the optimum mix of energy saving and washing results Energy saving mode The display panel light goes out after several minutes Start button flashes To activate the light press any button Energy saving mode is not activated if a programme is running m lf the laundry is subsequently dried in a tumble dryer select the spin speed according to the tumble dryer manufacturer s instructions Getting to Know the appliance en Getting to know the appliance Washing machine Detergent drawer Open the washing machine door Control display panel Close the washing machine door Washing machine door with Service flap with or without a drainage hose handle Depending on the model en Getting to Know the appliance Control panel Note You can find possible programme default settings and additional programme settings in the overview these differ depending on the model O O90 Programme selector for selecting a Additional programme settings Speed programme and switching the machine on and off Perfect Eco Perfect Easy Iron Water Plus via the Off position or Rinse Plus Selecting additional programme settings gt Page 12 Display panel for settings an
34. ressure too low Clean the filter in A 10 m urn onthe hot water tap fully supply hose kinked or trapped m Supply hose kinked trapped water pressure too low Clean the filter m Hot water hose not connected washing machine is operated using cold water only Ignore the message this message is only displayed for the first wash cycle elke m Detergent solution pump blocked Clean the detergent solution pump m Drain hose waste pipe blocked Clean the drain hose on the siphon E23 Water in the base trough due to appliance leaking Call after sales service LL If childproof lock is active deactivate it Other displays switch off the appliance wait for five seconds and switch it back on again If the display appears again call after sales service 22 Faults and what to do about them en Faults and what to do about them Faults Water is leaking out Water not flowing in Detergent is not dis pensed Washing machine door cannot be opened Programme does not Start Detergent solution is not drained Water not visible in the drum The spin result is not sat isfactory Laundry wet too damp opin cycle activated sev eral times The programme takes longer than usual The programme duration changes during the wash cycle Residual water in the care product compartment Odours in the washing machine amp symbol flashes Foam may escape from the detergent drawer Cause remedial action Attac
35. s are not leaking The screw connection is under water pipe pressure Cold water connection Connect the water supply hose to the water tap 26 4 mm and to the appliance not necessary for Aqua Stop models as this is permanently installed Model Standard E Model Aqua Secure el wl Model Aqua Stop Note Carefully turn on the tap and check that the connection points are not leaking The screw connection is under water pipe pressure Water outlet Caution Water damage lf the drain hose slips out of the wash basin or the connection point during draining due to high water pressure any escaping water may cause water damage secure the drain hose so that it cannot slip out Note Do not kink the water drain hose or put strain on it lengthways Positioning and connecting en You can lay the water drain hose as follows Outlet ina sink Warning Risk of scalding When you are washing at high temperatures there is a risk of scalding if you come into contact with hot detergent solution e g if hot detergent solution is being drained into a wash basin Do not reach into the hot detergent solution Caution Damage to the appliance fabrics lf the end of the drain hose is immersed in the drained water water may be sucked back into the appliance and may damage the appliance fabrics Make sure that The plug does not block drainage from the sink Th
36. ted the speed is reduced or the spin cycle is not performed for safety reasons Note Place large and small items of laundry evenly in the drum Page 23 17 en Setting the signal Ed Setting the signal 1 Set the button and information signals Set the programme selector to the Off position Press the button for Eco Perfect 19 hold it down and then turn the dial one position to the right and at the same time turn the programme selector one further position to the right 2 Set the volume for button signals The current signal volume now appears Go to point 3 to set the vol Set the programme selector Press the button for the Ready in time ume for the information sig tothe Off position to exit the repeatedly until the required signal volume is nals or menu set 3 Set the volume for the information signals Turn the programme selector Press the button for the Ready in Set the programme selector to the one further position time repeatedly until the required Off position to exit the menu information signal volume Is reached 18 Cleaning and maintenance Z Warning Danger of death There is a risk of electric shock if you touch live components Switch off the appliance and unplug the mains plug Z Warning Risk of poisoning Toxic vapours can be produced by cleaning agents that contain solvents e g cleaning solvent Do not use cleaning agents that contain solvents Caution
37. top In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty we will provide compensation under the following conditions 1 If water damage is caused due to a fault in our Agua Stop system we will compensate domestic customers for the damage caused 2 The liability guarantee is valid for the service life of the appliance 3 It is a prerequisite of all warranty claims that the appliance with Aqua Stop must have been installed and connected correctly in accordance with our instructions this also includes a correctly fitted Aqua Stop extension genuine accessories Our warranty does not cover defective feed lines or fittings leading to the Aqua Stop connection at the tap 4 Appliances with Aqua Stop do not need to be supervised during operation nor secured afterwards by turning off the tap The tap only needs to be turned off if you are away from home for a long period e g for several weeks holiday Advice and repair order in the event of faults GB 0844 892 8979 Calls from a BT landline will be charged at up to 3 pence per minute A call set up fee of up 6 pence may apply IE 01450 2655 0 03 per minute at peak Off peak 0 0088 per minute You can find the contact information for all countries in the attached after sales service directory Robert Bosch Hausgerate GmbH Carl Wery StraBe 34 81739 Munchen DEUTSCHLAND 9000928967 9401
Download Pdf Manuals
Related Search