Sony RDP-X200iPN
Contents
1. V 50 Hz 60 Hz Dimensions Approx 356 0 mm x 168 1 mm x 155 8 mm w h d incl projecting parts and controls Mass Approx 2 2 kg Supplied accessories Remote control with a lithium battery 1 AC adaptor 1 AC power cord 1 Reference Guide this document 1 Compatible iPod iPhone iPad models The compatible iPod iPhone iPad models are as follows Update the software of the iPod iPhone iPad to the latest version before using it with this unit Lightning connector works with iPhone 5s iPhone 5c iPhone 5 iPad Air iPad mini with Retina display iPad 4th generation iPad mini iPod touch 5th generation iPod nano 7th generation Wireless music streaming compatible models iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPhone 3GS iPhone 3G iPad Air iPad mini with Retina display iPad 4th generation iPad mini iPad 3rd generation iPad 2 iPad iPod touch 5th generation iPod touch 4th generation iPod touch 3rd generation iPod touch 2nd generation iPod nano 7th generation The remote command of MENU 4 and ENTER will only work with iPhone iPad and iPod touch Design and specifications are subject to change without notice Troubleshooting General The power does not turn on when the AC adaptor is connected Make sure the AC adaptor is connected to the wall outlet firmly There is no sound e Adjust VOLUME VOL on the r2. Pad unless otherwise specified by the text or illustrations If you have any questions or problems concerning your unit please consult your nearest Sony dealer General information Specifications iPod DC out 5 V MAX 2 1 A Bluetooth Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx 10 m Frequency band 2 4 GHz band 2 4000 GHz 2 4835 GHz Communication System Bluetooth Specification Version 2 1 EDR Enhanced Data Rate Compatible Bluetooth Profiles A2DP Advanced Audio Distribution Profile AVRCP Audio Video Remote Control Profile Supported codec SBC Subband Codec The actual range will vary depending on factors such as obstacles between devices magnetic fields around a microwave oven static electricity reception sensitivity aerial performance operating system application software etc Bluetooth standard profiles provide the specifications for Bluetooth communication between devices 3 Some operations may not be available for some models of iPod 4 Codec Audio signal compression and conversion format General Speaker Woofer Approx 76 mm dia x 2 Tweeter Approx 25 mm dia x 2 Input AUDIO IN jack 3 5 mm stereo minijack Impedance 50 kQ Average input level 245 mV Power output 20 W 20 W at 1 harmonic distortion Power source Rated external power source DC IN 20 V with supplied AC adaptor AC 100 V 240
3. SONY Personal Audio System 2013 Sony Corporation Printed in China RDP X200iPN To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To reduce the risk of fire do not cover the ventilation of the apparatus with newspapers tablecloths curtains etc And do not place lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus Do not install the appliance in a confined space such as a bookcase or built in cabinet Do not expose the batteries battery pack or batteries installed to excessive heat such as sunshine fire or the like for a long time As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately The unit is not disconnected from the AC power source mains as long as it is connected to the wall outlet even if the unit itself has been turned off The nameplate and important information concerning safety are located on the bottom exterior of the main unit and on the surface of the AC adaptor CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same type Notice for customers the following information is only applicable
4. al and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product On Bluetooth communication Bluetooth wireless technology operates within a range of about 10 meters Maximum communication range may vary depending on obstacles human body metal wall etc or electromagnetic environment The unit I ae cabinet Optimal performance Limited performance The following conditions may affect the sensitivity of Bluetooth communication There is an obstacle such as a person metal or wall between this unit and iPod A device using 2 4 GHz frequency such as a wireless LAN device cordless telephone or microwave oven is in use near the unit The unit is installed on a shelf made of steel Because Bluetooth devices and wireless LAN IEEE802 11b g n use the same frequency microwave interference may occur and resulting in communication speed deterioration noise or invalid connection if this unit is used near a wireless LAN device In such a case perform the following Use this unit at least 10 m away from any wireless LAN device If thi
5. e problem persists consult your nearest Sony dealer Power source Auto power off After playback of music from an iPod on the Dock Bluetooth connection or optional component connected to the AUDIO IN jack has finished and if no operation is performed for about 20 minutes the unit will automatically turn off To use the AC adaptor 1 Connect the supplied AC power cord to the AC adaptor 2 Connect the AC adaptor to the DC IN 20V jack on the back of this unit firmly and plug it into a wall outlet Note on the AC adaptor Use the supplied Sony AC adaptor only The polarity of the plugs of other manufacturers may be different Failure to use the supplied AC adaptor may cause the unit to malfunction o6r Remote control Before using the supplied remote for the first time remove the insulation film Aim the remote at the J Remote sensor of the unit The power indicator flashes when the remote s command is received O00000 OOO OOHOOO Y T D7 When to replace the battery With normal use the battery CR2025 should last for about 6 months When the remote can no longer operate the unit replace the battery with a new one side facing up nax 3 P Note e If you are not going to use the remote for a long time remove the battery to avoid any damage that may be caused by leakage or corrosion Continued on the reverse side iPod indicator Power i
6. e waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Applicable accessory Remote control Disposal of waste batteries applicable in the European Union and other European countries with separate collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electric
7. emote Noise is heard Ensure that the unit is not near in use portable phones etc The power indicator flashes The power indicator flashes when the unit receives a signal from the remote In this case the flashing does not mean there is an error or fault When using an iPod on the Dock There is no sound Make sure the iPod is connected firmly e Make sure that the function for iPod is activated Operation is not performed e Make sure the iPod is connected firmly Check that the iPod is compatible with this unit See Lightning connector works with The iPod does not charge Make sure the iPod is connected firmly e Make sure the AC adaptor is connected firmly Check that the iPod is compatible with this unit See Lightning connector works with When using the Bluetooth connection There is no sound e Ensure that this unit is not too far from the iPod or this unit is not receiving interference from a wireless LAN other 2 4 GHz wireless device or microwave oven Check that the Bluetooth connection is made properly between this unit and the iPod Pair this unit and the iPod again Keep away from metal objects or surfaces e Make sure that the Bluetooth function is activated Sound skips or the correspondence distance is short Ifa device that generates electromagnetic radiation such as a wireless LAN other Bluetooth device s or a microwave oven is nearb
8. for electronic communications networks and services of the Code of electronic communications On Copyrights and Licenses The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sony Corporation is under license Other trademarks and trade names are those of their respective owners iPad iPhone iPod iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries Lightning is a trademark of Apple Inc Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance Use of this radio equipment is not allowed in the geographical area within a radius 20km from the centre of Ny Alesund Svalbard in Norway Precautions To disconnect AC power grasp the plug itself not the cord e Since a strong magnet is used for the speaker keep credit cards using magnetic coding or spring wound watches CRT based TVs or projectors etc away from the unit to prevent possible damage from the magnet Do not leave the unit in a location near a heat source s
9. h the power supply of the unit Alarm Music Play Timer and Sleep Timer are available only when D Sappli is activated D Sappli also includes a clock display enlarge feature Notes e If the App to link with this unit is not downloaded to the iPod touch iPhone iPad a pop up message prompting you to download D Sappli may appear repeatedly Deactivate the App s link function to stop the pop up message To deactivate the App s link function Connect the AC adaptor and then press I to turn off the unit Remove the iPod touch iPhone iPad from the Dock Connector While holding down PAI also press and hold I on the unit for at least 2 seconds The power indicator flashes twice when deactivated To re activate the App s link function repeat the above steps The power indicator flashes once when activated
10. igital music player or other component to the AUDIO IN jack on the back of the unit using a suitable audio connecting cable not supplied Press I to turn on the unit Press AUDIO IN to activate the Audio in function w N The Audio in indicator lights up Turn the connected component on U A Play the connected component The sound from the connected component is output from the speakers of this unit Notes e The necessary type of audio connecting cable depends on the optional component Be sure to use the correct type of cable If the volume level is low adjust the volume of the unit first If the volume is still too low adjust the volume of the connected component Other useful functions Reinforcing the bass sound Press MEGA BASS The MEGA BASS indicator lights up To return to normal sound press the button again About App A dedicated Dock App for iPod touch iPhone iPad available at Apple App Store Search for D Sappli and download the free App to find out more about the functions Features D Sappli includes various timer functions Alarm Music Play Timer and Sleep Timer e You can set up to 10 alarms using songs in iPod or Preset Sound in D Sappli for the alarm sound Music Play Timer allows you to play pause desired music at a desired time Sleep Timer allows you to specify a time at which to stop music playback Alarm Music Play Timer and Sleep Timer work in combination wit
11. l be heard and the Bluetooth indicator will flash quickly Pairing mode of the unit is activated BLUETOOTH O PAIRING 4 Perform the pairing procedure on the iPod to detect the unit Select Settings gt Bluetooth and turn on the Bluetooth function The Bluetooth indicator lights up Example iPhone 5 A list of detected devices appears on the display The unit is displayed as RDP X200iPN If RDP X200iPN is not displayed repeat from step 3 5 Select RDP X200iPN on the display of the iPod while the Bluetooth indicator flashes quickly When Connected appears on the display of the iPod pairing and connection are complete Example iPhone 5 mi 08 32 3H Bluetooth Gr Devices gt RDP X200iPN Connected Now Discoverable Notes e The operation and display may differ depending on the model of iPod and or software version For details refer to the user s guide of the iPod Pairing mode is canceled after about 5 minutes If pairing mode is canceled halfway start over from step 3 e If pairing is not complete start over from step 3 e To pair with another iPod repeat steps 1 to 5 e In step 3 if a double beep sound is not heard or the Bluetooth indicator does not flash quickly press and hold BLUETOOTH on the remote again e If you turn off the unit or the iPod before the Bluetooth connection is complete pairing information will not be memorized and pai
12. ndicator MEGA BASS indicator Remote sensor O00000 OOOO 3 Bluetooth indicator Audio in indicator Supporter Dock Connector Docking Tray OOO VOLUME VOL on the remote control and gt II buttons have a tactile dot How to handle an iPod To set an iPod Notes e An iPod ina case or cover can be set in this unit However if the case or cover interferes with the connection remove the case or cover before setting the iPod on the Dock Connector e When placing or removing the iPod hold it at the same angle as the Dock Connector on the unit Do not pull the iPod forward too far e When placing or removing the iPod hold the unit securely Do not twist or bend the iPod as this may result in connector damage Remove the iPod when transporting it otherwise a malfunction may result To turn the unit on off Press 1 On Standby The power indicator lights up when the unit is turned on Adjusting the volume Press VOLUME VOL on the remote Tip The power indicator flashes three times in green when the sound is set to either maximum or minimum volume Operating an iPod on the Dock 1 Set the iPod on the Dock Connector The Dock Connector can be tilted slightly For details see How to handle an iPod Press 1 Press iPod to activate the function for iPod Ww N The iPod indicator lights up Press II The iPod begins to
13. only work with the Apple devices iPhone iPad iPod touch installed up to iOS 6 It will not work with iOS 7 or later In such case please operate on the screen of Apple devices directly To remove the iPod For details see How to handle an iPod To charge an iPod You can use the unit as a battery charger for an iPod Charging begins when the iPod is connected to the unit The charging status appears in the display on the iPod For details refer to the user s guide of the iPod Operating by wireless music streaming By using the Bluetooth connection you can listen to the sound from an iPod or other Bluetooth device with the unit wirelessly Pairing What is pairing Bluetooth devices need to be paired with each other beforehand Once Bluetooth devices are paired there is no need for pairing again unless pairing information is deleted Bluetooth indicator Status Bluetooth indicator blue Bluetooth off Off Bluetooth on but not Flashes slowly connected Pairing mode Flashes quickly Connected or communicating Lights up To pair with an iPod Keep the iPod and the unit within 1 meter of each other for this operation 1 Press 1 0 2 Press BLUETOOTH 3 on the remote to turn on the Bluetooth function when the Bluetooth indicator is off The Bluetooth indicator flashes slowly 3 Press and hold BLUETOOTH Q on the remote When pairing starts a double beep sound wil
14. play back A If the iPod does not start playing back operate directly on the iPod You can operate the connected iPod via this unit or the iPod itself To Press Pause playback Pil To resume play press again Go to the next track PPI forward on the remote Go back to the previous track Ke backward on the remote Locate a point while listening to P forward or the sound F amp a backward on the remote while playing and hold until you find the desired point Go back to the previous menu MENU on the remote Select a menu item or a track up down on for playback the remote Execute the selected menu item ENTER on the remote or begin playback During playback this operation returns you to the beginning of the current track To go back to the previous track press twice Notes e If a pop up message appears on the display of the iPod touch iPhone or iPad see About App Some operations may differ or may not be available on some models of iPod If the battery of the iPod is extremely low charge it for a while before operation Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using the iPod connected to this unit For details of environmental conditions for operating an iPod check the website of Apple Inc MENU up down and ENTER button on the main unit and or on the supplied remote control will
15. ring will not be completed Notes on pairing with a Bluetooth device other than iPod When pairing with a Bluetooth device other than iPod after step 3 pass code input may be required in your Bluetooth device In this case input 0000 e The operation and display may differ depending on the Bluetooth device and or software version For details refer to the user s guide of the Bluetooth device To listen to sound Keep the iPod and the unit within 10 meters of each other for this operation Check the following before operating the unit e The Bluetooth function of the iPod is on Pairing of the unit and the iPod is complete If pairing is not completed perform pairing again See To pair with an iPod 1 Press 1 0 2 Press BLUETOOTH on the remote to turn on the Bluetooth function The last connected iPod will be reconnected automatically when the Bluetooth function is turned on 3 Select your desired music video game etc to play on the iPod For details refer to the user s guide of the iPod Tips e If the last connected iPod does not reconnect automatically press BLUETOOTH on the remote If it still does not reconnect select the model name of this unit from the iPod Perform steps 4 to 5 in To pair with an iPod e To connect an alternative iPod which has previously been paired with this unit press BLUETOOTH on the remote to disconnect the currently connected iPod Then selec
16. s unit is used within 10 m of a wireless LAN device turn off the wireless LAN device Install this unit and iPod as near to each other as possible Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices Turn off this unit and iPod in the following locations as it may cause an accident where inflammable gas is present in a hospital train airplane or a petrol station near automatic doors or a fire alarm This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used but security may be insufficient depending on the setting Be careful when communicating using Bluetooth wireless technology We do not take any responsibility for leakage of information during Bluetooth communication Connection with all Bluetooth devices cannot be guaranteed A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG Inc and be authenticated Even if the connected device conforms to the above mentioned Bluetooth standard some devices may not be connected or work correctly depending on the features or specifications of the device Depending on the device to be connected it may require some time to start communication Note In the Reference Guide iPod is used as a general reference to functions on an iPod iPhone or i
17. t the model name of the unit from the alternative iPod you want to connect You can charge the iPod on the dock while listening to music via Bluetooth connection If the volume level is low adjust the volume of the unit first If the volume is still too low adjust the volume of the Bluetooth device To finish listening Terminate the Bluetooth connection by any of the following operations e Turn off the unit e Turn off the iPod Press BLUETOOTH on the remote iPod or AUDIO IN Operate the iPod to terminate the connection For details refer to the user s guide of the iPod To clear the list of models already paired and memorized in the unit 1 Press 1 0 2 Press BLUETOOTH on the remote to turn on the Bluetooth function 3 Press and hold BLUETOOTH and VOLUME on the unit at the same time The MEGA BASS indicator flashes Notes You can perform step 3 to clear the list even during Bluetooth connection e This operation cannot be performed when the unit is pairing e To pair with this unit again delete the model name of this unit from the iPod and perform pairing again See To pair with an iPod Connecting optional components You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit Be sure to turn off the power of each component before making any connections 1 Firmly connect the line output jack of the portable d
18. to equipment sold in countries applying EU directives This product has been manufactured by or on behalf of Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses provided in the separate service or guarantee documents CE Hereby Sony Corp declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For details please access the following URL http www compliance sony de Use of the RLAN network is governed with respect to private use by the Legislative Decree of 1 8 2003 no 259 Code of Electronic Communications In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art 105 indicates when free use is permitted 4 461 402 33 1 Reference Guide GB Bluetooth 4 Available on the App Store Made for ol iPod iPhone iPad 446140233 1 http www sony net with respect to the supply to the public of the RLAN access to telecom networks and services by the Ministerial Decree 28 5 2003 as amended and Art 25 general authorization
19. uch as a radiator or airduct or in a place subject to direct sunlight excessive dust mechanical vibration or shock e Allow adequate air circulation to prevent internal heat build up Do not place the unit on a surface a rug a blanket etc or near materials a curtain which might block the ventilation holes e Should any solid object or liquid fall into the unit unplug the unit and have it checked by qualified personnel before operating it any further During a thunderstorm do not touch the antenna aerial and plug Do not touch the unit with wet hands Do not place the unit anywhere near water NOTES ON LITHIUM BATTERY Wipe the battery with a dry cloth to assure a good contact Be sure to observe the correct polarity when installing the battery Do not hold the battery with metallic tweezers otherwise a short circuit may occur Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriat
20. y move away from such sources e Remove any obstacle between this unit and the iPod or move away from the obstacle Locate this unit and the iPod as close to each other as possible Re position this unit Re position the iPod Connecting cannot be done e Perform pairing again See To pair with an iPod Check that the iPod is compatible with this unit See Wireless music streaming compatible models Pairing cannot be done e Bring this unit and the iPod closer together Delete the unit from the iPod and perform pairing again Check that the iPod is compatible with this unit See Wireless music streaming compatible models Audio in There is no sound Make sure the audio connecting cable is connected firmly e Make sure that the connected optional component is in playback mode e Make sure that the Audio in function is activated The sound is low Check the volume of the connected optional component Remote control The remote does not function Replace the battery in the remote with a new one if it is weak e Make sure that you are pointing the remote at the remote sensor on the unit Do not cover or place any objects directly in front of the Remote sensor receiver Remove any obstacles in the path of the remote and the unit Make sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light If th
Download Pdf Manuals
Related Search