Home

Samsung UN40H4005AF

1. correct Clean the transmission window located on the top of the remote control Try pointing the remote directly at the TV from 5 6 feet away Program the Cable Set top box remote control to operate the TV Refer to the Cable Set top box user manual for the SAMSUNG TV code A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual Caption on the TV menu is greyed out There is a plastic smell from the TV TV Signal Strength is unavailable in the Self Diagnosis Test menu TV is tilted to the right or left side The Channel menu is grey out unavailable Your settings are lost after 30 minutes or every time the TV is turned off You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component Caption must be activated on the external device This smell is normal and will dissipate in a few days This function is only available for digital channels received through an Antenna RF Coax connection Remove the stand base from the TV and reassemble it The Channel menu is only available when you select the TV source If TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Please change from Store Demo mode to Home Use mode using the Plug amp Play procedure Press the SOURCE button to select TV
2. If you re using a component connection make sure the component cables are connected to the correct jacks There is poor color or brightness There is a dotted line on the edge of the screen The picture is black and white e Adjust the Picture options in the TV menu go to Picture Mode Color Brightness Sharpness e Adjust the Energy Saving option in the TV menu go to MENU Setup Eco Solution Energy Saving e Try resetting the picture to the default picture settings go to MENU Picture Picture Reset e f the picture size is set to Screen Fit change it to 16 9 Change the cable satellite box resolution on the TV If you are using an AV composite input connect the video cable yellow to the Green jack of Component Input 1 When changing channels the picture freezes or is distorted or delayed e f connected to a cable box please try to reset it Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080 or 720p Sound Problems There is no sound or the sound is too low at maximum volume The picture is good but there is no sound Perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may be caused by the source or signal e Check the volume of the device Cable Sat Box DVD Blu r
3. Cannot find a channel e Re run Plug amp Play or run Auto Program go to MENU Channel Auto Program Poor Picture The TV image does not look as good as it did in the store The picture is distorted macroblock error small block dots pixelization First perform the Picture Test and to see if your TV is displaying the test image properly Go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may be caused by the source or signal e f you have an analog cable satellite box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD channels from the channel line up Air Cable Antenna connection Try HD channels after running Auto Program amp Many HD channels broadcast up scaled SD Standard Definition content The picture quality of up scaled SD content is low e Adjust the Cable Set top box video output resolution to 1080 or 720p e Compression of video contents may cause picture distortion especially on fast moving pictures such as those in sports and action movies e A weak signal can cause picture distortion This is not a TV problem Mobile phones used close to the TV within 3 3ft may cause noise in the picture on analog and digital channels Color is wrong or missing Incorrect or loose connections may cause color problems or a blank screen
4. 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List screen select the show or channel entry you want to cancel and then press the TOOLS button The Tools Menu appears 3 Select Cancel Schedules and then press the ENTERL button The Cancel Schedule screen appears 4 Select OK and then press the ENTERC button Information Display the information for a show or channel you have scheduled You can also change the schedule Information 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List screen select the show or channel entry you want information for and then press the TOOLS button The Tools Menu appears 3 Select Information and then press the ENTER C button The Time Viewing Information screen appears 4 Select Change Info and press the ENTERC button to change information or select Close and press the ENTERL button to close the Information screen E Select All Deselect All You can select or deselect all channels in the channel list _The On Screen Menus i Your TV has two kinds of menus the Main menu and the various Tools menus The Main menu gives you access to most or all of the menu options available on your TV The Tools menus display a selected number of frequently used menu options that change depending on the screen you are
5. _ED TW user manual Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Important Warranty Information Regarding Television Format Viewing amp See the warranty card for more information on warranty terms Wide screen format LED Displays 16 9 the aspect ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stationary graphics and images on screen such as the dark sidebars on non expanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle but permanent burned in ghost images in the LED picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On L
6. AVI MPEG 1 2 4 1920x1080 LPCM mkv MKV ADPCM H264 1920x1080 DTS MJPEG 640x480 DivX3 11 DivX4 7 7 ee DivX5 Divx6 320X109 pre n ol ASF reer ADPCM n wmv MPEG 1 2 4 920x1080 ANNAT Ca Pause lt gt Jump 42 Tools D Return H 264 1920x1080 eS met z 4 1 1 In the Media Play menu press the lt or gt button to select a A a ae Videos and then press the ENTER C4 button ne H 264 1920x1080 DD 2 Press the lt P A buttons to select a video in the file list we MPEG 1920x1080 ies MPEG 3 Press the ENTER C button or gt Play button ee PS MPEG2 1920x1080 ay The file name is displayed on the top of the screen with the id H 264 1920x1080 jdi f f MPEG 1 2 4 1920x1080 playing time bes m x i i 1920x1 lt 2 If video time information is unknown playing time and the ica scale EA alia progress bar are not displayed a fash a a aa ae ve formats Sorenson H 263 1920x1080 6 30 20Mbps During video playback you can search using the lt and gt buttons amp In this mode you can play movie clips contained in a game but you cannot play the game itself Other Restrictions e Video content will not play or not play correctly if there is an error in the content or the container e Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the Supported Video Formats table e f the Index Table erroneous the S
7. DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization of the copyright holder All trademarks and registered trademarks mentioned herein are the property of their respective owners 15 Kensington Lock The Kensington Lock is not supplied by Samsung It is a device Display Modes HDMI DVI Input Optimal resolution 1366 x 768 60Hz used to physically fix the system when using it in a public place Horizontal Vertical Pixel Clock Sync 4366x Refer to the manual provided with the Kensington Lock for additional Mode e ane ate liens Sat Pe es information on proper use 640 x 350 31 469 70 086 25 175 7 amp Please find a fR icon on the rear of the TV The Kensington a a2 al x ei 640 x 480 35 000 66 667 30 240 v slot is beside the ICON MAC 832 x 624 49 726 74 551 57 284 7 ma 1152 x 870 68 681 75 062 100 000 amp The position and color may differ depending on the model oer T 3 640 x 480 37 861 72 809 31 500 y Assembling the Cable manager 640x480 37500 75000 31500 y 800 x 600 37 879 60 317 40 000 v 800 x 600
8. For instructions see your Quick Start Guide Language Set the menu language amp Choose between English Espa ol and Fran ais Q Setting the Time Time amp The time you set will appear when you press the INFO button E Clock Set the clock so you can use the various timer features of the TV amp Ifyou disconnect the power cord you have to set the clock again To set the clock follow these steps 1 Select Setup gt Time gt Clock 2 Press ENTERC and select Auto or Manual and then press ENTER LC again If you selected Auto The TV will automatically download the correct time from a digital channel e Select Time Zone and then press the ENTERC button Use the A buttons to select your Time Zone and then press ENTER Q e Select DST Daylight Savings Time and then press ENTERL Select On if you want to turn the DST adjustment on and off manually Select Off to turn off the DST adjustment Select Auto if you want the TV to adjust to DST automatically Press ENTER C when done amp DST and Time Zone function are only available when the Clock Mode is set to Auto Picture Options amp When the TV is connected to a PC you can only make changes to the Color Tone Size and HDMI Black Level E Color Tone Cool Standard Warm Cool makes the picture bluer cooler Warm 1 and Warm 2 make the picture redder warmer E Size Set the size and aspect ratio of the picture on the
9. To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Covered by one or more of the following U S patents 7 295 678 7 460 668 7 515 710 7 519 274 Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS 2 0 Channel is a trademark of DTS Inc DTS Inc All Rights Reserved Manufactured under a license from U S Patent No s 6 285 767 8 027 477 5 319 713 5 333 201 5 638 452 5 771 295 5 970 152 5 912 976 7 200 236 7 492 907 8 050 434 7 720 240 7 031 474 7 907 736 and 7 764 802 DTS the Symbol and DTS and the Symbol together are registered trademarks amp DTS Studio Sound is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Open Source License Notice Open Source used in this product can be found on the following webpage http opensource sams
10. 30 60 90 120 150 and 180 minutes amp To cancel the Sleep Timer select Off Timer 1 Timer 2 Timer 3 Turns the TV on and off automatically at times and days you select You can set three different on off timer settings amp You must set the clock first E On Time Off Time Set the hour minute am pm and Activate Inactivate fields for the On Time and Off Time Use the lt gt buttons to move from field to field Use the A V buttons to change the values in each field To activate the timer with the setting you have chosen set the Activate Inactivate field to Activate E Volume Set the desired loudness E Contents To select what will be turned on when the timer setting is activated You can set the TV to turn on a specific channel or play back contents such as photo or audio files Use the lt buttons to move to move to the Contents field and then press the ENTER C button The Contents screen appears Use the lt P gt buttons to move from field to field Use the A buttons to change the values in each field TV USB Select TV or USB The USB device must be connected to your TV before you can select USB Antenna Displays the current antenna source Air or Cable Channel If you have selected TV select the desired channel Music Photo If you have selected USB follow these steps to select a folder containing MP3 Music or JPEG Photo files on the USB device amp The maximum displayed nu
11. 50 000 v IT ina 800 x 600 46 875 75 000 49 500 v H ui Illo 7 1024 x 768 48 363 60 004 65 000 v a Ji j 1024 x 768 56 476 70 069 75 000 v 1024 x 768 78 750 v VESADMT 1152x864 67 500 75 000 108 000 1280 x 720 45 000 60 000 74 250 z 1280 x 800 49 702 59 810 83 500 1280 x 1024 63 981 60 020 108 000 1366 x 768 85 500 v 1440 x 900 55 935 59 887 106 500 1600x 900RB 60 000 60 000 108 000 1680 x 1050 146 250 1920 x 1080 148 500 Troubleshooting If the TV seems to have a problem first review this list of possible problems and solution If none of these troubleshooting tips apply visit samsung com then click on Support or call Samsung customer service at 1 800 SAMSUNG Problem Possible Solution Flickering and Dimming If your Samsung Television is flickering or dimming sporadically you may need to disable some of its energy efficient features like the Eco Sensor or the Energy Saving feature Follow the steps below with your remote to turn these features off or on e Energy saving Menu gt Setup Eco Solution Energy Saving Select Settings Component Connections Screen Color If you find that the color on your Samsung television s screen is not correct or black and white first run a Self Diagnosis Test on the TV to make sure there are no device issues e Self Diagnosis User Menu Support Self Diagnosis Picture Test e f
12. A pop up window appears 3 Press the MEDIA P button on your remote The Media Play menu appears LI Using the Media Play Menu Media Play Wg sum m Change Device La Enter 5 Return To open Media Play in the Menu follow these steps 1 Press the MENU button Then press the A or W button to a Application on the left and then press the ENTERL utton 2 Press the A or W button to select Media Play USB and then press the ENTER C button 3 Press the lt or gt button to select an icon Videos Music Photos Settings and then press the ENTERC button amp Media Play might not work properly with unlicensed multimedia files amp Need to Know List before using Media Play USB e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives and Flash Card Readers Devices should be connected directly to the TV s USB port USB HDD is not supported Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss A USB device that requires high power more than 0 5A may not be supported e Do not disconnect the USB device while it is loading The higher the r
13. In the United States 1 800 SAMSUNG 1 800 726 7864 In Canada 1 800 SAMSUNG Still image warning Avoid displaying still images Such as jpeg picture files or still image elements Such as TV channel logos TV shows or movies in panorama or 4 3 format stock or news scroll bars etc on the screen The constant display of still pictures can cause ghosting or image burn in image retention on the LED screen which will affect image quality To reduce the risk of this effect please follow the recommendations below e Avoid displaying the same TV channel for long periods e Always try to display any image in full screen mode Use the TV s Picture Options menu to select the optimal screen size e Reduce brightness and contrast values to the minimum required to achieve the desired picture quality Values that exceed the minimum may speed up the burn in process e Frequently use all TV features designed to reduce image retention and screen burn in Refer to proper user manual section for details Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center www samsung conm ca_fr support support French I I I I I I I I I I I I I I i Country CANADA U S A i I I I I i Samsung Electronics Samsung Electronics i Ee Canada Inc 2050 Derry America Inc 85 I i Road West Mississauga Challenger Road A I Ontario LON OB9 Canada Ridgefi
14. Power e Auto Power Off User Menu Setup Eco Solution Auto Power Off ey ees Specifications Cl Environmental Considerations Operating Temperature Operating Humidity 50 F to 104 F 10 C to 40 C 10 to 80 non condensing Storage Temperature 4 F to 118 F 20 C to 45 C Storage Humidity 5 to 95 non condensing Model Name UN40H4005AF UN48H4005AF Display Resolution 1366 x 768 Screen Size 40 Class 48 Class Diagonal 40 0 measured diagonally 47 6 measured diagonally Sound Output 10W x2 35 9 x 21 5 x 3 5 inches Dimensions W x H x D 42 6 x 25 1 x 3 5 inches Body 914 2 x 547 9 x 90 9 mm 1083 2 x 637 8 x 90 9 mm 35 9 x 23 0 x 7 7 inches 42 6 x 26 6 x 8 0 inches With stand 914 2 x 586 4 x 196 4 mm 1083 2 x 677 0 x 203 9 mm Weight Without Stand 15 4 lbs 7 0 Kg 20 0 lbs 9 1 Kg With Stand 16 7 lbs 7 6 Kg 21 8 lbs 9 9 Kg Design and specifications are subject to change without prior notice amp This device is a Class B digital apparatus amp For information about the power required and more about power consumption refer to the label attached to the product amp Typical power consumption is measured according to Energy Star Program requirements for televisions amp Dispose unwanted electronics through an pene recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 E JACK PANEL DETAIL REA
15. appears 3 Select Delete from Favorite in the Tools menu and then press the ENTER C4 button E Timer Viewing You can schedule a channel to be displayed automatically at a set time even when you are watching another channel You must set the current time first in the Time gt Clock function to use Time Viewing To schedule a channel follow these steps 1 Select a channel in the Added Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Time Viewing in the Tools menu and then press the ENTERC button The Time Viewing screen appears Timer Viewing A DTV Air 6 1 Once Start Time 12 01 am Ca Enter v 01 01 2014 4 gt Move Adjust gt Return 4 Use the lt gt buttons to move from entry field to entry field and the A buttons to change the entries Where numbers are displayed you can also enter numbers directly using the number keypad on your remote amp If you select Everyday or Every Week the date you select in the Date field becomes the start date for your scheduled viewing For Everyday the TV will turn on every day at the time you selected starting from that date For Everyweek the TV will turn on every week on the same day of the week as the start date you selected at the time you selected from that day on If you select Once the TV will turn on once on the date and time you selec
16. device and check the connection If a file you deleted from the PC is still found when you run Media Play use the Empty the Recycle Bin function on the PC to permanently delete the file thumbnail functions Photos only supports the sequential joeg format The Videos option does not support the scene search and If the number of files and folders saved on a USB storage device is Name MPEG 4 timed text SAMI SubRip SubViewer Micro DVD SubStation Alpha Advanced SubStation Alpha Internal Name Xsub SubStation Alpha Advanced SubStation Alpha SubRip over approximately 4000 the files and folders may not appear and some folders may not open The maximum displayed number of files including sub folders in MPEG 4 Timed text e Supported Video Formats Container File extension ttxt smi srt sub sub or txt ssa ASS Format Picture Format Text Format Text Format Text Format Text Format i File i 5 A Frame Bit Audio one folder of USB storage device IS 2000 Extension Container Video Codec Resolution rate fos rate Mbps Codec The media may not be playing smoothly when using the device DivX3 11 DWX4 s o204080 lower than USB 2 0 DivX5 Divx6 MPS H264 1920x1080 6 30 A mp4 MP4 ADPCM Videos ea aaao MC ovie 01 avi WA DivX3 11 Divx4 i f 1920x1080 DivX5 DivX6 MP3 AC3 avi
17. guag than one language Stop Slide Product TV sizein VESA screw hole specs Standard Quantity Show You can start or stop a Slide J Family inches A B in millimeters Screw Start Slide Show Show 200 X 200 Slide Show _ You can select the slide show J Speed speed during the slide show You can set and select are i background music when z Do not install your Wall Mount Kit while watching a Slide Show your TV is turned on It may result in ar personal injury due to electric shock Zoom You can zoom into images in full g screen mode You can rotate images in full D Rotate v Securing the TV to the Wall You can see detailed information Information vV p i as about the played file viv y Caution Pulling pushing or climbing onto the TV Other Information Installing the Wall Mount Kit The wall mount kit Sold separately allows you to mount the TV on the wall For detailed information about installing the wall mount see the instructions provided with the wall mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the 1 product or injury to yourself or others if you elect to install the wall mount on your own Wall Mount Kit Specifications VESA 2 amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching to other building material
18. mode go to MENU Setup Plug amp Play gt ENTER C The speakers are making an inappropriate noise Perform the Sound Test as explained above Check the cable connections Make sure a video cable is not connected to an audio input For Antenna or Cable connections check the signal information A weak signal may cause sound distortion No Picture No Video The TV will not turn on The TV turns off automatically Make sure the wall outlet is working Make sure the AC power cord is securely plugged into the wall outlet and the TV e Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote contro does not work below e Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged securely into the wall outlet and the TV e When you are watching TV connected to an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degr
19. same SPDIF Output The SPDIF Sony Philips Digital InterFace outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack ona receiver or home theater E Audio Format PCM Dolby Digital You can select the Digital Audio output SPDIF format The available Digital Audio output format may differ depending on the input source amp By connecting the TV to a receiver or home theater with Dolby Digital and 5 1ch speakers and selecting Dolby Digital you can maximize your interactive 3D sound experience U Other Features Program Rating Lock The Program Rating Lock feature lets you block programs you ve determined are inappropriate for your children based on the program s ratings To access the Program Rating Lock feature and make any changes you must enter a PIN personal identification number To watch a blocked program you must also enter the same PIN amp Program Rating Lock is not available in HDMI or Component mode amp The default PIN number of a new TV set is 0 0 0 0 You can set your own PIN using the Change PIN function How It Works When you access the Program Rating Lock Menu functions for the first time the PIN input screen appears Enter 0 0 0 0 The PIN screen closes and the Program Rating Lock Menu appears Every time you access the Program Rating Lock functions the PIN screen will appear and you must enter a PIN When the R
20. 720p 1080i 1080p 4 3 Screen Fit E Digital Clean View Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try all the Digital Clean View options until the TV displays the best picture E HDMI Black Level Normal Low For HDMI signals select the black level to adjust the screen depth Low make blacks look darker amp Available only in HDMI mode RGB signals E Film Mode Off Auto Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality amp Available in ATV DTV interlace AV COMPONENT 480i 1080i and HDMI 480i 1080i E Motion Lighting Off On Reduce power consumption by brightness control adapted motion amp Available in Standard mode only Picture Reset E Picture Reset Reset Picture Mode Cancel Resets the picture settings to their factory defaults If you selected Manual The Clock Set screen appears Use the A V buttons to change the values in each field or use the number buttons to enter the values directly Use the lt gt buttons to move from field to field When done with all the fields press ENTERC amp Available only when Clock Mode is set to Manual E Sleep Timer Automatically shuts off the TV after a preset period of time
21. Air and then press ENTERC The TV will automatically start memorizing channels Cable If your TV is connected to a cable outlet choose Cable and then press ENTERC4 Go to Step 3 Auto If you choose Auto and then press ENTERC4 the TV will automatically select the correct Antenna source Go to Step 3 3 On the Cable Type screen use the lt A buttons to select the type of digital and analog cable systems you have STD HRC or IRC Most systems are STD Standard When done select Start and then press ENTERC The TV will start memorizing channels amp Channel memorization can take up to 45 minutes depending on your cable system amp Memorized channels are added to the Added Channels list These are the channels you will see when you use the Channel buttons on your remote Clear Scrambled Channel This function filters out scrambled channels after Auto Program is completed This process may take up to 20 30 minutes amp Press the ENTER C button to stop the Clear Scrambled Channel This function is only available in Cable mode UY Managing Channels Channel List See your list of Added channels Favorite channels or channels you ve scheduled for viewing Add or delete Favorite channels add or delete channels from the Added Channels list schedule channels or programs for viewing Watch a channel by selecting the channel in the All Channels Added Channels or Favorite screen pressing the A Y but
22. ED models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats you use for viewing Uneven LED aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center BN68 05829L 00 To delete channels from the Favorites list follow these steps 1 Select one or more channels in the Favorite Channels list using the A buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu
23. R VIEW J rr ee E ll i IN lal 4 m OPTICAL EO E o Unit inches Model name 6 UN40H4005AF 22 UN48H4005AF 26 0 NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors 2014 Samsung Electronics America Inc s416 2014 06 25 KM 3 15 47
24. are displayed in order e During the slide show you can adjust the slide show speed using lt REW or gt gt FF button e You can move to other files using lt or gt button amp Media Play can play Music files automatically during a Slide Show if Background Music is set to On amp You cannot change the Mode in Background Music until the Background Music file has finished loading C Pause lt gt Jump 4 Tools 5 Return 1 In the Media Play menu press the lt or gt button to select Music and then press the ENTERC button 2 Press the lt A V buttons to select the desired Music in the file list 3 Press the ENTERC button or gt Play button amp During music playback you can search using the lt and gt button Q 44 REW and gt gt FF buttons do not function during play amp Media Play only displays files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem e Supported Photo Formats Image Photo Resolution JPEG Other Restrictions e CMYK YCCK Color space JPEG are not supported Playing Multiple Files E Playing selected video music photo files 1 On the File List screen highlight a file and then press the Yellow button on your remo
25. ating Lock screen appears select Program Rating Lock and then press ENTERC Select On and then press the ENTERL key again Depending on what type of programs or movies you want to block select one of the options on the screen and then press the ENTERL button The options are listed below E TV Parental Guidelines You can block TV programs based on their ratings This function allows you to control what your children are watching E MPAA Rating You can block movies based on their MPAA ratings The Motion Picture Association of America MPAA has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children E Canadian English You can block TV programs based on their Anglophone Canadian ratings E Canadian French You can block TV programs based on their French Canadian ratings E Downloadable U S Rating Parental restriction information can be used while watching DTV channels Locking Blocking Programs or Movies You lock or block programs and or movies in essentially the same way for each option Each option displays a grid or table All the tables have ratings listed on the left The TV Parental Guidelines option also has kinds of content listed across the top ALL Lock all TV ratings FV Fantasy violence V Violence S Sexual situation L Adult Language D Sexually Suggestive Dialog To lock block movies or shows with certain ratings and or ki
26. ay etc connected to your TV e f you are using an external device check the device s audio output option Ex you may need to change your cable box s audio option to HDMI if the box is connected to your TV using an HDMI cable Reboot the connected device by reconnecting the device s power cable Video Decoder Supports up to H 264 Level 4 1 H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max H 263 is not supported GMC is not support Audio Decoder Supports up to WMA 8 9 STD 9 PRO 10 PRO WMA 9 PRO and WMA 10 PRO support 5 1 channel LBR mode of WMA Pro is not supported WMA Lossless is not supported Music Music 1 No Singer Music 2 No Singer Music 3 No Singer Music4 No Singer Music 5 No Singer 01 10 04 02 Photos gt Normal 1024x768 2010 2 1 Image1024 jpg Ce Pause lt p gt Previous Next a Tools 5 Return 1 In the Media Play menu press the lt or gt button to select Photos then press the ENTER C button 2 Press the lt A buttons to select a photo in the file list 3 Press the ENTERC button or gt Play button NOTE e While a photo list is displayed press the gt Play ENTERC button on the remote control to start a slide show All files in the file list section will be displayed in the slide show e During the slide show files
27. d sound mode only E Balance L R Adjusts the balance between the right and left speaker E 100HZz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the loudness of specific bandwidth frequencies E Reset Resets the equalizer to its default settings DTS TruSurround Available in Standard sound mode only DTS TruSurround is a patented DTS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats Preferred Language Digital channels only Digital TV broadcasts can transmit many audio tracks simultaneously for example simultaneous translations of a program into foreign languages amp You can only select a language from among the ones being broadcast Multi Track Sound MTS Analog channels only E Mono Select for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal E Stereo Select for channels that are broadcasting in stereo E SAP Select to listen to the Separate Audio Program which is usually a foreign language translation amp Depending on the program being broadcast you can listen to Mono Stereo or SAP Auto Volume Automatically adjusts the volume level when you change video sources or content so the level remains the
28. ect is set to External Speaker TV Speaker Off External Speaker On amp When Speaker Select is set to TV Speaker TV Speaker On External Speaker On amp If there is no video signal both speakers will be mute Visual Impaired Digital channels only Adds verbal description to the main audio to help the visually impaired Sound Reset E Reset All Resets all sound settings to the factory defaults Channel Menu i Memorizing Channels When you first set up your TV using Plug amp Play the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List The Antenna and Auto program functions described below let you re run the channel memorization function without having to re run the Plug amp Play procedure Antenna Air Cable Before your television can memorize the available channels you must select your TV s signal source Air using an antenna or Cable Select Menu gt Channel gt Antenna gt Air or Cable After you have selected the signal source go on to the Auto Program function amp Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to For example if you receive your TV signal over the air and you select Cable you will see only snow You must select Air to see a picture Auto Program The Auto Program function memorizes all channels that are available over the air or through y
29. ee connectors This is part of the product s design and is not a defect POP TV s internal banner ad appears on the screen Select Home Use under Plug amp Play mode For details refer to Plug amp Play Initial Setup UH4005 ZA BN68 05829L 00ENG indb 2 AS amp This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Watch these troubleshooting on video at www samsung com spsn VQ amp Some functions and pictures shown in this manual are available on specific models only D You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site samsung com Support Downloads To upgrade download the firmware to your computer copy the firmware file to a USB memory stick insert the USB memory stick into the TV s USB slot and then select Support gt Software Upgrade in the TV s menu 4 Media Play Additional Functions E Videos Music Photos Play Option menus When playing a file press the TOOLS button You can select another video file to play directly You can play movie and music Repeat Mode files repeatedly EarA You can adjust the picture size to your a Picture Mode You can adjust the picture setting V Sound Mode You can adjust the sound set
30. eek Jump function is not supported e The menu may take longer to appear if the video s bit rate exceeds 10Mbps e Video content can not be played if there are many contents in one file Trouble Powering On Before you turn the TV on find the red light on the right or left bottom of your TV Press the power on button on the TV or remote and the light should blink about 5 times before the TV turns on If you find that you are having trouble powering on your Samsung television there are a number of things to check it before making a call to the service department e f you happen to be using the TV as a monitor and the stand by light only blinks for a few seconds when you press the power button your PC is in sleep mode To take your PC out of sleep mode press a key on your keyboard or move the mouse Then try turning your TV on If you re sure your power cord remote control and PC are functioning properly you may be having a cable issue If you have a cable or satellite box your TV may appear to be off because the cable or satellite box is not outputting a signal To test the signal output of your cable or satellite box press the guide or info button on the cable or satellite box remote control If the screen displays the guide or info data the problem is caused by the box Stand Assembly e f you have any trouble assembling the stand refer to Install the Stand in the Start Up or Stand Installation Guide
31. eld Park NJ 07660 1 I I I 1 Customer Care 4509 SAMSUNG 726 7864 i Center i I I l www samsung com ca i 3 rt English Web Site support English www samsung com us I I I I I I I I 2014 Samsung Electronics Co Ltd All rights reserved Programmed List on the Channel List Screen The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function You can view modify or delete a show you have scheduled using the functions on the Programmed List screen Tools menu Programmed List Screen Tools Menu E Change Info Change the scheduling information for a show or channel you have scheduled To change the information follow these steps 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List screen select the show or channel entry you want to change and then press the TOOLS button The Tools Menu appears 3 Select Change Info and then press the ENTERC button The Time Viewing screen appears 4 Use the lt P gt buttons to move from entry field to entry field and the A buttons to change the entries Where numbers are displayed you can also enter numbers directly using the number keypad on your remote 5 Press the ENTERC button when done E Cancel Schedules Cancel a show or channel you have scheduled To cancel a scheduled show or channel follow these steps
32. esolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360 x 8640 pixels If a file is corrupted or the TV does not support the file type the Not Supported File Format message appears The TV cannot play MP3 files with DRM that have been downloaded from a for pay site Digital Rights Management DRM is a technology that supports the creation distribution and management of digital content in an integrated and comprehensive way including protecting the rights and interests of content providers preventing illegal copying of contents and managing billing and settlements 2014 06 25 KM 3 15 44 PTP devices are not supported If an over power warning message is displayed while you are e Supported Subtitle Formats External connecting or using a USB device the device may not be recognized or may malfunction If the TV has no input during the time period set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when your connect them to the TV If you use a USB extension cable the TV may not recognize the USB device or may not be able to read the files on the device If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to a PC format the
33. ion when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software E Programmed Shows all channels and programs currently scheduled using Timer Viewing amp Remote control buttons active on the Channel List screen e Green Zoom Enlarges or shrinks a channel number e Yellow Select Move the cursor to a channel Press the Yellow button to select the channel A YW mark appears Repeat to select additional channels Then open the Tools menu and apply a function to the channels you selected 4_ Tools Displays the Channel List Tools menu The Tools menus may differ depending on the situation Display Icons Used in the Channel List Screens Icons Meaning v A selected channel hd A Favorite channel A reserved program am A program currently being broadcast Q The Channel List Tools Menu The Channel List Tools menu contains most of the functions you can use on the All Channel Added Channels and Favorite List screens To view select a list screen select a channel and then press the TOOLS button E Add Delete Delete a channel from or add a channel to the Added Channels list To delete channels from the Added Channels list follow these steps 1 Select one or more channels in the Added Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS b
34. ith digital channels Default Service1 Service6 CC1 CC4 Text1 Text4 Digital channels only The Digital Captions function works with digital channels amp Service1 6 may not be available in digital caption mode depending on the broadcast Digital Caption Options Digital channels only Size Options include Default Small Standard and Large The default is Standard Font Style Options include Default and Styles O to 7 The default is Style O Foreground Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the color of the letters The default is White Background Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the background color of the captions The default is Black Foreground Opacity This adjusts the opacity of text Options include Default Transparent Translucent Solid and Flashing Background Opacity This adjusts the opacity of the caption background Options include Default Transparent Translucent Solid and Flashing Return to Default This option sets each Size Font Style Foreground Color Background Color Foreground Opacity and Background Opacity to its default amp Digital Caption Options are available only when you can select Default and Servicel Service6 in Caption Mode amp The Foreground and Background cannot be set to the same color Air If your TV is connected to an antenna choose
35. mber of files including sub folders in one folder of USB storage device is 2000 amp The media may not be playing smoothly when using the device lower than USB 2 0 1 Use the lt gt buttons to move to the field under Music or the field under Photo and then press the ENTERL button The TV displays a single folder the Root folder and the type or name of the device 2 Press the ENTERC button A list of folders on the device appears amp If there are no folders on your device press the Yellow select button to select the Root folder and then press the RETURN button The Timer screen re appears 3 Use the A buttons to highlight a folder that contains music or photos and then press the Yellow select button to select the folder 4 Press the RETURN button The Timer screen re appears E Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can select the days you want to activate the timer by using the lt gt buttons to highlight the day and then pressing the ENTERC button To unselect a day highlight it and then press the ENTERC button When you finished making all your selections on the Timer screen press either the ENTERC or RETURN button Mode E Standard Selects the normal sound mode E Music Emphasizes music over voices E Movie Provides the best sound for movies E Clear Voice Emphasizes voices over other sounds Equalizer Available in Standar
36. nds of content click the square next to the rating and or under the kind of content A lock appears To unlock unblock click the square again When you click a low rating all the ratings above it will also display locks You can also Allow All or Lock All When done press the RETURN button on your remote E Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them in Enter New PIN fields Re enter the same 4 digits in Confirm New PIN fields When the Change PIN screen disappears press the OK button The TV has memorized your new PIN If you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off MUTE 8 2 4 POWER on Audio Delay Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver When you select Audio Delay a slider appears Use the left and right arrow buttons to adjust the slider Press ENTER L when done Oms 250ms Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker amp When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Sel
37. necting the device s power cable Make sure the coaxial cable is connected securely Run Auto Program to add available channels to the channel list go to MENU Channel Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu There are 3 options STD HRC and IRC Verify the antenna is positioned correctly Check the Caption Setup menu Try changing Caption Mode Service 1 to CC1 Some channels may not have caption data Compression of video contents may cause picture distortion especially on fast moving pictures such as those in sports and action movies A weak signal can cause picture distortion This is not a TV problem Remove the left and right audio connections from the set top box If the buzzing stops this indicates that the set top box has a grounding issue Replace the Component video cables with an HDMI connection The picture will not display in full screen The remote control does not work The cable set top box remote control does not turn the TV on or off or adjust the volume HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the TV Adjust the picture size option on your external device or change the TV to full screen Replace the remote control s batteries Make sure you insert them with the polarity
38. ot as effective as Backlight E Sharpness Sharpens or dulls the edges of objects E Color Adjusts the color saturation The higher the Color setting the more intense the color Low settings remove color and the picture becomes black white and gray E Tint G R Adjusts the amount of green and red in the picture As you increase the amount of green the amount of red decreases and vice versa amp When the TV is connected to a PC you can only make changes to Backlight Contrast Brightness and Sharpness LJ Other Channel Menu Functions Channel Mode Added Channels Favorite Channels Lets you select the channel list displayed when you press the ANCHY Channel button on your remote For example if you select Favorite Channels you will only see Favorite channels when you press the ACHY button Fine Tune Analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually amp Select the channel and then select Fine Tune amp Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset fine tuning select the channel select Fine Tune and then select Reset on the Fine Tune screen Plug amp Play Lets you re run the Plug amp Play initial setup procedure
39. our cable system and adds them to the Channel List To start Auto Program follow these steps 1 Push MENU M Channel Auto Program ENTERC on your remote The Antenna Source screen appears 2 On the Antenna Source screen select the source of your TV signal Game Mode On Off When you connect a game console such as a PlayStation or Xbox to your TV you can enjoy a more realistic gaming experience by turning on the Game Mode function amp Precautions and limitations for game mode e Before you disconnect the game console and connect another external device set Game Mode to Off in the setup menu e If you display the TV menu in Game Mode the screen shakes slightly amp Game Mode is not available when the input source is set to TV amp After connecting the game console set Game Mode to On You may notice slightly reduced picture quality Caption On Screen Text Dialogue E Caption You can switch the caption function on or off If captions are not available they will not be displayed on the screen amp The Caption feature does not work in Component or HDMI mode E Caption Mode You can select the desired caption mode Default CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work w
40. s please contact your 3 nearest dealer If you install the TV on a ceiling or slanted wall it may fall and result in severe personal injury A may cause the TV to fall In particular ensure that your children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows To prevent the TV from falling amp Since the necessary brackets screws and string or cable are not supplied please purchase these separately Insert the screws into the wall brackets and firmly fasten them to the wall Make sure the screws are firmly fixed to the wall amp We strongly recommend you drive the screws into a stud Using screws insert the screws through the TV brackets and then fasten the screws to the top VESA screw holes on the back of the TV Connect the brackets on the TV and the brackets on the wall with a strong string or cable and then tie the string or cable tightly to the brackets amp Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer Install the TV close to the wall so that it does not fall amp Connect the string or cable so that the brackets on
41. screen Your cable box or satellite receiver may have its own set of screen sizes as well However we highly recommend you use the TVs 16 9 mode most of the time amp The menu is deactivated when the H 264 1080p DTV is being played 16 9 Sets the picture to the 16 9 wide screen format Zoom1 Provides moderate magnification of the picture Sides top and bottom are cut off Zoom2 Provides larger magnification of the picture Sides top and bottom are cut off Wide Fit Enlarges the aspect ratio of the picture so the picture fits the entire screen 4 3 Sets the picture to the old 4 3 format and puts black or gray borders on the right and left of the picture Do not watch your TV in the 4 3 format for a long time Traces of borders displayed on the left right and center of the screen may cause image retention screen burn which is not covered by the warranty Screen Fit Displays the full image without any cut off when your TV is inputting HDMI 720p 1080 1080p or Component 1080i 1080p HD signals amp HD High Definition has a 16 9 aspect ratio and 1080i 1080p 1920x1080 or 720p 1280x720 resolution You can adjust and store settings for each external device you have connected to an input on the TV Picture Sizes available by Input Source are listed below Picture Size 16 9 Zoom1 Zoom2 4 3 Input Source ATV AV Component 480i 480p DTV 1080i Component 1080i 1080p HDMI 16 9 Wide Fit
42. te 2 Repeat Step 1 to select multiple files amp NOTE e AY mark appears to the left of the selected files To cancel a selection press the Yellow button again e To deselect all selected files press the TOOLS button select Deselect All and then the ENTER C4 button 3 Press the TOOLS button select Play Selected Contents and then press the ENTER C button E Playing a video music photo folder 1 With the folders on your USB device displayed use the lt gt A V buttons to highlight a folder 2 Press the TOOLS button select Play Folder and then press the ENTER C button a10 There is no picture video RF Cable Antenna Connection The TV is not receiving all channels No Caption on digital channels The picture is distorted macroblock error small block dots pixelization Others Purple green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection Check the cable connections Remove and reconnect all cables connected to the TV and external devices Set your external device s Cable Sat Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the correct input source by pressing the SOURCE button on the remote control Reboot the connected device by recon
43. ted 5 Press the ENTER LC button on your remote when done amp Only Added Channels can be scheduled amp Scheduled programs and channels are displayed in the Programmed List amp When you select a digital channel press the button to view the digital program list If you highlight a program in the list and then press the ENTERC Schedule button you set Timer Viewing for that program directly E Channel Name Edit Analog channels only Lets you assign a name of up to five characters to an analog channel For example Hist Food Golf etc This makes it easier to find and select a channel E Select All Select all the channels in the displayed channel list E Deselect All Deselect all the selected displayed channels amp You can only select Deselect All when one or more channels are selected E Auto Program See Auto Program under Memorizing Channels UH4005 ZA BN68 05829L 00ENG indb 1 Transportation to and from the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please Call toll free
44. the test is ok try making sure e Your connections are all consistent For example if you ve used the AV In jack on your TV make sure you have used the AV Out jack on your video source e Try making sure you have connected to the correct jacks For example if you use the Component jacks labeled Pb Pr and Y to connect your TV and video source make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV the red Pr jack on the source to the red Pr jack on the TV Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright there are some settings you should check before calling for a repair e Backlight Contrast Brightness Sharpness Color Tint G R and so on Go to Picture in the Menu and then try adjusting these options Unwanted Powering off If your Samsung TV appears to turn off by itself there may be an issue with either your Timer settings or your Eco friendly No Signal Power Off feature First make sure the Sleep Timer is not accidentally set The Sleep Timer lets you fall asleep with the TV still on Knowing that it will turn off after a certain period of time and not waste energy e Sleep Timer User Menu Setup Time Sleep Timer If the Sleep Timer is not activated you may have engaged the No Signal Power Off or Auto Power Off feature e No Signal Power Off User Menu Setup Eco Solution No Signal
45. the wall are at the same height or lower than the brackets on the TV Untie the string or cable before moving the TV amp To purchase a TV Holder kit contact Samsung customer care 3t Storage and Maintenance Ifa sticker was attached to the TV screen some debris can remain after you remove the sticker Please clean it before watching the TV amp The exterior and screen of the product can get scratched during cleaning Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches License DIVX HD xX DOLBY DIGITAL PLUS dts 2 0 Channel dts Studio Sound HOM Clean the product with a soft cloth dampened with in a small amount of water Do not use a flammable liquid e g benzene thinners or a cleaning agent Do not spray water directly onto the product Any liquid that goes into the product may cause a failure fire or electric ek qo Le DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies
46. ting V You can play the video with Subtitles This function only works if the subtitles have the same file M name as the video f You can select the digital audio Audio Format output format wv Category Title Picture Size Subtitle Setting amp NOTE Standard dimensions for wall mount kits are shown in the table below e When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided e Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set e For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications e Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt A You can change the audio e ee language if the video has more J Always have two people mount the TV on a wall
47. to standby mode if no picture is being received amp Disabled when the PC is in power saving mode E Auto Power Off Off On The TV will be automatically turned off when no user operation is received for 4 hours Auto Protection Time E Auto Protection Time Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time you define the screen saver is activated to prevent the formation of ghost images on the screen Support Menu L Self Diagnosis E Picture Test Use to check for picture problems If the problem appears in the test picture select Yes and follow the directions on the screen E Sound Test Use the built in melody sound to check for sound problems If the problem occurs during the test select Yes and follow the directions on the screen E Signal Strength Digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength E Reset Reset all settings to the factory defaults amp The PIN input screen appears before the setup screen amp Enter your 4 digit PIN Change the PIN using the Change PIN option Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung com to a USB memory device HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this informat
48. tons and then pressing the ENTER C button Air sj uuey9 Pappy 9 Air 9 1 v TV 9 10 Air 10 1 y TV 10 v IV 11 Zoom Select 4 Tools Channel List Screens icons are listed on the left side Select an icon using the A V buttons to view each list E amp All Channels Shows all currently available channels including those you deleted from the Added Channels list E Added Channels Shows all Added Channels These are the channels that appear when you press the CH LIST button E Y Favorite Shows all favorite channels Boot Logo Enable disable displaying the logo while the TV starts up Eco Solution E Energy Saving Off Low Medium High Picture Off This adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E Eco Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room If you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco Sensor is On the minimum screen brightness can be adjusted manually amp If Eco Sensor is On the display brightness may change become slightly darker in most cases depending on the surrounding light intensity E No Signal Power Off Off 15 min 30 min 60 min Sets how quickly the TV switches
49. ung com Open Source License Notice is written only English To send inquiries and requests for questions regarding open sources contact Samsung via Email oss request samsung com This product uses some software programs which are distributed under the Independent JPEG Group ICU License ICU 1 8 1 and later COPYRIGHT AND PERMISSION NOTICE Copyright c 1995 2008 International Business Machines Corporation and others All rights reserved Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute and or sell copies of the Software and to permit persons to whom the Software is furnished to do so provided that the above copyright notice s and this permission notice appear in all copies of the Software and that both the above copyright notice s and this permission notice appear in supporting documentation THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE
50. utton on your remote The Tools menu appears 3 Select Delete in the Tools menu and then press the ENTERL button To add channels to the Added Channels list follow these steps 1 Select one or more channels in the All Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Add in the Tools menu and then press the ENTERL button All deleted channels will be shown on the All Channels list You add channels back to the Added Channels list on the All Channels list amp A gray colored channel indicates the channel has been deleted from the Added Channels list amp The Add menu option only appears for deleted channels E Add to Favorite Delete from Favorite Lets you add channels to and delete channels from your Favorites list To add channels to the Favorites list follow these steps 1 Select one or more channels in the All Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Add to Favorite in the Tools menu and then press the ENTERC button Media Play L Enjoy photos music and or movie files saved on a USB Mass Storage Class MSC device LJ Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and or movie files to the USB jack on the back of the TV
51. viewing The Main menu has seven primary categories e Picture e Input e Sound e Application e Channel e Support e Setup To view the Main menu press the MENU button on your remote To view a Tools menu press the TOOLS button on your remote amp The menu options that appear in the Main menu depend on the Source you have selected For example if you have selected the HDMI source the Channel category will not appear To see the Channel category you must first select TV in the Source List The Menu options are presented below arranged by Main menu categories A Tools button symbol GED next to an option name indicates the option is also available in one of the Tools menus Mode Select your preferred picture mode amp When your TV is connected to a PC you can only select Entertain and Standard E Dynamic Brightens the screen Suitable for a bright room E Standard Suitable for a normal E Movie Darkens the screen making it less glary Suitable for watching movies in a darkened room E Entertain Sharpens the picture Suitable for games amp Only available when the TV is connected to a PC Backlight Contrast Brightness Sharpness Color Tint G R E Backlight Adjusts the brightness of the screen by adjusting the brightness of the individual pixels E Contrast Increases or decreases the contrast between dark and light areas of the picture E Brightness Adjusts the brightness of the screen N

Samsung UN40H4005AF

Contents

Download Pdf Manuals

Related Search

Related Contents