Home

Grundig 40 VLE 6421 BL 40" Full HD Smart TV Wi-Fi Black

Contents

1. or gt Options Auto Adjust for automatic PC configura tion Auto Adjust Modex when set to On automatically makes adjustments in PC mode Position adjusts the picture position horizontally and vertically Size sets the cycle frequency Phase removes horizontal flicker blur ring and horizontal lines Press EXIT to end the setting ENGLISH 73 OPERATION WITH COMMON INTERFACE____ What is common interface Common Interface Cl is an interface for DVB receivers m Encrypted channels can only be viewed with a CA module suitable for the encryption system and the corresponding smart card m The television set is equipped with a Common Interface slot into which CA modules from vari ous providers can be inserted m You can insert the provider s smart card into the CA module in order to enable the en crypted channels you want to see Inserting the CA module Note m Switch off the device before inserting the CA module in the Cl slot 1 Insert the smart card into the CA module 2 Insert the CA module with the smart card into the Cl slot on the television Note E To see which CA module is in the Common Interface slot go to the CA Module sub menu m When you insert a CA module into the Cl slot on the television for the first time wait a few moments until the television has regis tered the CA module 74 ENGLISH Access cont
2. gt W OF DAK 5 To return to the zoom menu press BACK qk 6 Press EXIT to end the settings Sleep timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Open the Tools menu with TOOLS 2 Select the line Sleep Timer with Ww or A 3 Select the switch off time with or gt Note E Set the function to Off with or gt to switch it off 4 Press EXIT to end the settings TELEVISION OPERATION Zap function This function allows you to save the television channel which you are currently watching and switch to other channels zapping 1 Select the channel you want to save in the zap memory with 1 0 or P P for example channel 1 BBC 1 and save with BACK lt x 2 Change channels with 1 0 or A W 3 You can now use BACK lt to switch between the saved channel in the example BBC1 and the channel you were watching before 4 Press EXIT to quit the zap function Electronic TV guide RoviGuide Electronic TV guide has two operation modes online and offline In the offline mode only the broadcast informa tion is received via broadcast A lot of content can be received via the Inter net connection in the online mode such as pro gramme information channel logos information about players
3. If a data medium contains different file formats you can deactivate data Video file Audio file Picture file you do not need for the playback using a filter function The main menu of the file browser el EENEG oii Device selection F Type Photo amp Up Folder P Movie F Music F Picture New Folder New Folder New Folder New Folder eo Media Options SS Add to Play List 2200 DivX Setting Back Preview Data medium selection Data type Name of the data medium Folders on the data medium Cou fF WON Menu navigation 52 ENGLISH Settings in the USB setup menu Selecting the menu 1 Open the menu with MENU 2 Select the menu item Media Player with gt or and press OK to confirm 3 Select the external data medium with or gt and press OK to confirm 4 Select the Media Options with ee green 5 Select the line Disk Management with VW or A and press OK to confirm Note Additional operations are explained in the following sections Selecting the display mode 1 Select the line View Mode with Ww or 2A 2 Press or gt to select the function 3 Press EXIT to end the setting Switching to automatic preview If the automatic preview is switched on you can see the selected file in the main menu of the file browser 1 Select the line Auto Preview with W or
4. Polarization Select the channel polar ization with or gt as Horizontal or Vertical Network Search Select the network search with or gt as On or Offe l Press e red button to start searching The Digital Searching menu appears and the scan for TV channels begins Note m The search can be aborted with EXIT Press EXIT to end the setting 76 ENGLISH LNB Settings Notes m The following description about the LNB set tings premise a substantial expertise about the satellite systems Ask your specialist dealer m Your TV supports SCR system Single Chan nel Router If you are using SCR satellite system follow the steps described in LNB Type section Open the menu with MENU Activate the menu item Settings with OK Select the menu item Source Setup with gt or and press OK to confirm Select the line Manual Channel Search with w or A and press OK to con firm Select the option Satellite with or gt and press OK to confirm Activate the option Antenna Settings with yeeeex blue The Antenna Settings menu is dis played Select the required items with Ww A Satellite Press OK and use gt W or A to pick the satellite you wish to get the digital stations from and press OK to confirm Transponder
5. blue selects activates displayed after a short while various functions in applications 3 Usage of application mostly depends on 9 switches off the application and goes application s own structure Follow the notes back to My apps menu on the screen 10 EXIT switches off the application and goes back to the last broadcast source you Playback and other options in the were In applications Note m Some applications do not support all play ing options and playing options may vary among different applications gt starts playing in the applications fl pauses playing in the applications Ii stops playing in the applications A Q N In the applications press 4d or gt gt to start picture search 5 Inthe applications press or P to skip forward backward 46 ENGLISH WEB BROWSER Web browser menu sills Lel 7 8 9 pomazu ra 15 lt gt c EST ca aR oar cago G grundig i a o ola hE ee Pe MJ PTB S alz APL RS VEL am GRRE es 2 SS A PULL ALAA Zoom Out gt Zoom In P _ Page Up P _ Page Down oo Navigation Process Menu Tool Bar 1 Menu controls Web browser 2 Active tab Web browser allows you to navigate in the In ternet 3 Previous page A Newisdue 1 Open the menu with MENU 5 Refresh 2 Select the menu item Web Browser with gt or and press OK to confirm
6. 10 Switch to the channel Editor with eee yel low or press EXIT to end the setting ENGLISH 75 SPECIAL SETTINGS Searching for digital television channels from a satellite manu ally If a certain channel cannot be found with au tomatic search you can search it manually by manual search function You must enter all pa rameters of the channel correctly You can ob tain the current transponder information from teletext page satellite TV magazines or internet 1 2 8 Open the menu with MENU x Activate the menu item Settings with OK Select the menu item Source Setup with gt or and press OK to confirm Select the line Manual Channel Search with W or A and press OK to con firm Select the option Satellite with or gt and press OK to confirm Select the required items with W or A Service Typex Press or gt to select whether you want to search for only televi sion channels DTV only radio channels Radio or both Radio TYV Scan Typex Press or gt to select whether you want to search for only free digital television channels Free only scrambled digital television channels Scrambled or both Free Scrambled Transponder Enter channel frequency with 1 0 as a 5 digit number Symbol Rate Enter channel symbol rate with 1 0 as a 5 digit number
7. 5 Select the line Put device into standby with W or A and press OK to con firm The connected external device is switched Source Setup Remote Behavior Put device into standby off gt Change Area Back 5 Select the line Remote Behavior with w or M X 6 Select control type Pass Through Deck or Zap with or gt Notes m Pass Through is included in the menu as an option that can be selected in every device type Deck Control and Tuner Control options change depending on the external device connected m Apply trial and error method to determine the functions of the remote control buttons for the selected control type m Refer to the user manual of the DIGILINK compatible device for its functions 7 Press EXIT to end the setting ENGLISH 67 USING EXTERNAL DEVICES High definition HD ready playback high defini tion television signals ace 1080p input sources HDTV set top box or High Definition DVD player to the HDMI socket This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Bandwidth Digital Content Protec Your television can HD TV You can connect the digital HDTV signal tion Connection options m Which television socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are
8. Auto format The picture format is automatically switched to 16 9 for 16 9 programmes The picture format is automatically switched to 4 3 for 4 3 programmes 16 9 and 14 9 formats During programmes in 4 3 format the picture is stretched horizontally if 16 9 or 14 9 is selected The picture geometry is stretched horizontally With actual 16 9 signal sources from a set top box on the Euro AV socket the picture fills the screen completely and with the correct geom etry 4 3 format The picture is shown in 4 3 format LetterBox format The letterbox setting is especially suitable for programmes in 16 9 The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pic tures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The pic ture geometry remains unchanged Subtitle format If you cannot read the subtitles which appear on the bottom of the screen then select Subtitle Panorama format This setting is suited to films with a large width height ratio During programmes in 4 3 format the picture is stretched horizontally if the Panorama func tion is selected The picture geometry is stretched horizontally Overscan off format When this mode is selected high defined pic ture from HDMI and Component inputs is not cropped and it is displayed in its original size This
9. Press OK and use gt W or A to select a tran sponder and press OK to confirm Use e red to add a transponder use ee green to delete it or use eeee blue to change transponder data LNB Typex Press OK and use or gt to select the LNB type used in the satellite system and press ee green to confirm If you are using the SCR System please perform the User Band KB Frequency and LNB Selection settings User Band Select the user band number assigned to the user with or gt UB Frequency MHz Enter the user band frequency assigned to the user band with 1 0 SPECIAL SETTINGS LNB Selection If more than one satellites are used in the current SCR system select 2 to 2 2 for the satellite corresponding to the relevant positions using or gt LNB Power Set the LNB power to Off or set it to 13 18V or 14 19V depending on the LNB type by using or gt Notes m Use installation equipment supported sug gested by your SCR Switch m Other users receivers connected to the system may be affected if the specified user band number and frequency is changed dur ing installation m User band and user band frequency is speci fied on the SCR switch used and each user receiver must select a specified user band and user band frequency m With SCR satellite s
10. and highlight it by press ing OK Channel is marked with Activade the Tools menu with eee yel low Select the line Rename with Vv or A and press OK to confirm Delete the current channel name press e red Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select x to delete the character entered and press OK to confirm Confirm the channel name with ee green Note m To enter other channel names repeat steps 1 to 6 Creating a list of favourites analog channels You can select your favourite channels and save them in up to four lists FAV1 to FAVA 1 In the Channel Editor menu select the channel s you want to add in the favor ites list with W A or gt and highlight the television channel by pressing OK Channel is marked with 2 Activade the Tools menu with eee yel low 3 Select the line Add To Fav with VW or A and press OK to confirm Add to Fav menu is displayed 4 Select the favorite list you want to add the selected channels with W or A and store with OK The channels are marked in the Channel Editor with or You can add t
11. button 2 Activate the menu item Settings with OK 3 Select the menu item TV Settings with gt or and press OK to confirm 4 Select the line Accessibility Settings with VW or A and press OK to confirm Note Additional operations are explained in the following sections Subtitle Mode only for digital television channels Subtitles for the deaf and hard of hearing can be switched on and off 1 From the Accessibility Settings menu use W or A to select the line Subtitle Modex 2 Set the preferred option Off Hard of Hearing or Basic with or gt 3 Press BACK lt to go back one menu level or press EXIT to end the setting Audio description audio subtitles Audio description is an additional audio channel for people who are visually handicapped The activities surroundings scene changes or the ap pearance the gestures and facial expressions of the actors are described This sound is transmitted at the same time as the normal sound with digital television stations This depends on the programme being broadcast 1 From the Accessibility Settings menu use W or A to select the line Audio Description 2 Select On with or gt 3 Select the line Audio Description Volume with W or A and use or gt to adjust volume 4 Press BACK to go back one menu leve
12. firm 5 Select the option Air or Cable with or gt and confirm the source you are re ceiving analog broadcast from by pressing OK 6 Select the option Analog with or gt and press OK to confirm Menu is displayed Source Setup 62 25 MHz Quality so apii System Signal Strength be Band om Frequency MHZ Channel Fine Tuning Ey Auto Previous sj Auto Next Back 7 Select the line Program No with w or A and press gt or 1 0 to select the preset 8 Select the line Band with W or A To select S special channel or C chan nel options press or gt 82 ENGLISH 9 Select the line Channel with W or A To enter the channel number step by step press or gt or enter it directly with 1 0 or start a automatic scan with ee green or 0 0K yellow Note m The current system is displayed in the Sys tem If the colour and or sound is not func tioning correctly select System with w or A Select the required setting with or gt mWhen fine tuning is required select Fine Tun ing with W or A and tune with or gt 10 To save the setting press eeeex blue Note m To set other television channels repeat steps from 7 to 10 11 Press EXIT to end the setting Changing sto
13. to go back one menu level or press EXIT to end the setting Software update OAD only for digital television channels 1 From the About menu use W or A to select the line Software Updates and press OK to confirm 2 Select the option OAD with or gt and press OK to confirm The search for new software is being car ried out Note E If no new software is available the menu avu tomatically switches off 3 If new software is available press ee green to install the software The new software will be loaded Warning m Television will restart after update Do not turn your television s power off during up dates Note m For automatic checking of software update select from Source Setup menu gt Ad vanced Settings the line OAD with w or A Use or gt to select On Software update Internet only for digital television channels 1 From the About menu use W or A to select the line Software Updates and press OK to confirm 2 Select the option Internet with or gt and press OK to confirm The search for new software is being car ried out Note E f no new software is available the menu avu tomatically switches off 3 If new software is available press ee green to install the software The new software will be loaded Warning m Television will restar
14. 4 Select the line Automatic Channel Search with W or A and press OK to con firm Menu is displayed 5 Select the option Satellite with or gt and press OK to confirm 6 Confirm the push button Next Page with OK 7 Select the Channel Type Press or gt to select whether you want to search for only digital channels Digital or only radio channels Radio or both Digital Radio and press OK to select and mark or unmark the Digital and or Radio items 8 Select Scan Type To select whether you want to search for only free digital television channels Free only scrambled digital television channels Scrambled or both Free Scrambled press or gt and press OK to select and mark or unmark the Free and or Scrambled items Q9 Press the e red button to start searching Notes m When updating via the same satellites a security query is displayed at the start of a search m f the previously stored channels should be retained in the channel list and the new channels found be added to it then press ee green E f e red is pressed the saved channels will be deleted from the current channel list The Digital Searching menu appears and the scan for TV channels begins The search is complete as soon as the message Search is completed appears Note m The search can be aborted with EXIT
15. 6 Newtab Web Browser is displayed 7 Address bar 3 Select URL entry area with A or W and S Gash isie press OK to confirm Virtual keyboard will be displayed Q9 Favorites 4 Enter the address and confirm with eeee 10 Home page blue 11 Settings Notes 12 History m Other functions are explained on the screen 13 Search in Web m You may connect a keyboard or mouse to 14 Zoom both sockets USB1 or socket USB2 l HDD socket to use in the Web browser 15 Close Web browser Keyboards requiring special driver are not 16 Close tab supported ENGLISH 47 MULTIMEDIA SERVER MODE Playing the video music and Selecting the digital media image files with home network server connection 1 Open the menu with MENU With DLNA menu of your television you can 2 Select the menu item DLNA with gt or easily access Video music and photo files on server and thanks to DMR feature you can au tomatically start and stop media playing on de vices with DMC feature Notes m You can share your video music and image files through devices such as PC mobile phone or NAS Network Attached Storage that function as DMS Digital Media Server compatible with DLNA m If the DMS device and the TV are connected to the wireless network at the same time there may be lags and freezings during video playback m TV can also operate with DMS software that can be installed on a computer but it is not guaran
16. Guidancex and press or gt to confirm 64 ENGLISH 2 Enter the PIN code 1234 with 1 0 in the password prompt 3 Select the access level with or gt 4 Press BACK m lt to go back one menu level or press EXIT to end the setting Note m When the TV is in review buffer mode the parental rating of the program in the live broadcast is applied on the content being watched rather than the actual parental rat ing of the content being watched As a re sult a parental rated content being watched in the review buffer mode will not necessarily show as parental rated and vice versa This means that if parental rated program starts in live broadcast the PIN pop up message will appear in review buffer or the PIN pop up message will be dismissed in review buffer as soon as a program without parental rating starts in live broadcast Locking the menus By using this function you can lock Automatic Channel Search Manual Channel Search and Channel Editor menus as to be accessed only when the PIN code is entered 1 From the Parental Guidance menu use VW or A lt to select the line Menu Lock and press or gt to confirm 2 Enter the PIN code 1234 with 1 0 in the password prompt 3 Activate the lock with or gt On Note m To switch off the menu lock use or gt to select the setting Off 4
17. file only supports subtitles with srt sub ass ssa smi format Names of the subtitle and movie files must be the same Otherwise subtitle can not be displayed USB OPERATION Additional playback functions Depending on the file formats used the follow ing additional functions are possible Selecting partition in DivX Plus HD files only supported video files 1 During playback select the next chapter with gt 2 During playback select the previous chap ter with Selecting titles on DivX Plus HD files only supported video files 1 During playback select the next title with A lt 2 During playback select the previous title with W Playing selected tracks Only play the marked tracks 1 Select the track you want with W A or gt and highlight with eee yel low 2 Select the track you want with w A or gt and highlight with eee yel low 3 Start playback with gt 4 Press il to end playback Note m To remove the highlighting select the track with W or A and remove the marking with eee yellow Selecting a track or picture in steps SKIP 1 During playback select the next track pic ture you want with P 2 Select the previous track picture with Playback begins with the track or picture you selected Move to desired time only video files 1 Press OK du
18. menu 2 To enter Grundig Application Store select the push button Online Store with VW A or gt and press OK to confirm Grundig Application Store menu is displayed 44 ENGLISH of to continue installing application press BACK lt x SMART INTER CTIVE TV 3 0 FEATURE Uninstalling internet applications 1 Press e red button in My apps menu and select categories with or gt 2 Select the application you want to uninstall with W A or D 3 Actiade the tools menu by pressing eeee blue select the option Uninstall with or gt and press OK to confirm A warning message appears 4 Confirm the push button Uninstall with OK or to cancel application removal select the push button Cancel with or gt and press OK 5 Press OK to finish the process Rating internet applications You can rate applications installed on your TV individually 1 Press e red button in My apps menu and select categories with or gt 2 Select the application you want to rate in My apps menu with W A or gt 3 Actiade the tools menu by pressing eeee blue select the option Rate with or gt and press OK lt to confirm 4 Press A once and select the rating with or gt To save application
19. to pass to application field or select the application you want with numeric buttons l Most Popular 2 Highest Rated 3 Release Date or 2 Select the required ray date press ee green to select the application Si or gt and press OK to con by searching the application by name irm Main menu of the application will be 2 Select the application you want to down displayed after a short while load with W A or gt and press N OK to confirm ores Information on the application will be m When you attempt to start any application displayed without a cable or wireless network connec a tion the related warning is displayed on the 3 To download and install application press screen e eeeK blue Application will be downloaded and Applications will not start if your cable is dis naled connected or you do not have an IP even P if you re connected to a network or you do 4 To start application press OK not have internet access In this case check Network connection settings See page 32 Ord Grundig Application Store Grundig Application Store is an online depot where you can download many applications that you may use on your TV Some applications in the MyApps menu are loaded in your device as factory settings You can download a wide array or applications from Grundig Application Store 1 Press to open MyApps
20. yellow Tools menu is displayed 5 Select the line Move with v or A and press OK to confirm Note m If more than one channel is selected for mov ing channels will be moved one after the other according to the selection order of channels 6 Select the new place of the channel with VW A or gt and press OK to confirm 7 To exit the Channel Editor menu press EXIT ENGLISH 21 SETTINGS Enter own names for the favourites lists max 7 characters You can rename all favorites lists 2 To recall favorites list menu when no menu is opened on the screen press FAV Select the favorites list you want to rename with or gt and press eeee blue but ton Virtual keyboard will be displayed To delete the current name step by step press e red Select the required character number with VW YAK XEK OF D K and move to the next character with OK Repeat the same process for all characters numbers Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters To save the new name with ee green Press EXIT to end the setting 22 ENGLISH Renaming AV channels You can rename AV channels according to the device you have connected For example for a PC which you have connected to HDMI1 source of TV with HDMI cable you can name the sou
21. 4 gag language we would 3 communicate Sw i i M TF Menu Language esky Dansk Deutsch English Espanol EAAnvika Fran ais Hrvatski Italiano VETES Nederlands Norsk Polski Portugu s Pyccxun Romaneste Sloven ina Eesti Suomi Svenska B bnrapckn Sloven ina Lietuvi T rk e oK Select Help m f the Basic Setup menu does not appear on the screen make the setting by following the instructions on returning the television to its factory settings on page 61 Select the menu language with gt VW or A and press OK to confirm Welcome menu appears Step by step installation will be made to be able to use the television Press OK to start the installation Select the country in which the television set is operated with gt W or A and press OK to confirm User Mode menu appears the option Home Modes is selected Confirm the option Home Modes with OK Or select the option Enhanced with or gt and press OK to confirm Home Modex contains preconfigured TV settings that provide energy savings conforming EUP 16 ENGLISH Enhanced if you will use the television for a demo presentation increased image and volume settings are used in this mode Increased mode consumes more energy 7 Press OK to confirm Next Network Settings is displayed Note m f you want to connect your televi
22. 65 EU Directive on limitations on use of certain hazardous materials on electric elec tronic domestic and office equipment 86 ENGLISH This product complies with Eu Network interfaces This product is intended for connection to the ADSL network Disposing of the packaging The packing materials are dangerous for chil dren Keep the packing materials out of the reach of children The packing of your product is manufactured from recyclable materials Dispose by classify ing in accordance with waste instructions Do not dispose along with normal household waste Environmental note This product has been made xe from high quality parts and ma terials which can be re used CC and recycled Therefore do not dispose of the product with normal household waste at the end of its life Take it to a collection point for recycling electri cal and electronic devices This is indicated by this symbol on the product in the operating man ual and on the packaging Please find out about collection points operated by your local authorities Help protect the environment by recycling used products INFORMATION Troubleshooting If the remedies given below do not work please consult an authorised GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers Problem Screen lit snow but no station Poor picture contrast Interfer
23. Grundig Ap plication Store registration without the need for re registration 1 Press to open MyApps menu Grundig Smart App registry screen is displayed 2 To login press eeee blue 3 Enter your E mail address Enter the data use V A and gt to select BACK lt and press OK to confirm 4 Enter your Password Enter the data use W A and gt to select BACK lt and press OK to confirm Note Em Press eee yellow if you forget your pass word Your new password will be e mailed to you Enter the new password 5 To login press eeee blue Conditions of Use shall be displayed 6 Press OK to accept conditions of use An information is displayed You can choose if you want restore your applica tions or if you want download the default applications 7 Select the desired line with w or A and press OK to confirm The GRUNDIG appLICATION store menu is displayed and the standard ap plications are loaded 8 An information message will be displayed in a short while accept with OK ENGLISH 43 SMART INTER CTIVE TV 3 0 FEATURE Downloading and installing inter net applications Selecting internet applications 1 Press to open MyApps menu My Apps menu will be displayed 1 Select the desired category in Grundig Online Applications with w or A and press gt
24. Press BACK lt to go back one menu level or press EXIT to end the setting Blocking the multifunction switch When the key lock is activated the multi function switch on the television does not function 1 From the Parental Guidance menu use V or A lt to select the line Keypad Lock and press or gt to confirm 2 Enter the PIN code 1234 with 1 0 in the password prompt CONVENIENCE FUNCTIONS 3 Activate On or deactivate Off the panel lock with or gt 4 Press BACK m lt to go back one menu level or press EXIT to end the setting Changing the PIN code Instead of the default code 1234 you can enter a personal code Please take note of your personal code 1 From the Parental Guidance menu use W or A to select the line Change PIN and press or gt to confirm 2 Enter the current PIN code 1234 with 1 0 3 Enter your new four digit personal PIN code with 1 0 4 Reenter your personal PIN code with 1 0 5 Press BACK m lt to go back one menu level or press EXIT to end the setting Blocking a television channel You can block individual television channels which are not suitable for children using a per sonal PIN code 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK
25. also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Successfull Internet Connection Suc cesstull messages and MAC address will be displayed 13 Press EXIT to end the setting Connecting automatically by enter ing the network password Use this method for establishing a connection if your router does not support WPS PBC or WPS PIN entry 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played Network Configuration Change Connection Type Network Configuration Advanced 59 Connect E39 Test Connection KaG Change Area Back Exit Exit 4 Select the line Change Connection Type with Ww or A and press OK to con firm 5 Select the option Wireless with or gt and press OK to confirm WiFi warning screen will be displayed 6 Activate WiFi with ee green 7 Select the line Network Configuration with W or A and select the option AUTO with or gt 8 Select the line Select Access Point with VW or A and press OK to confirm Select Access Point menu is displayed by scanning available w
26. analogue and all unencrypted digital stations This television set has an integrated digital and analogue receiver The digital receiver unit converts the signals from digital stations to pro vide outstanding audio and picture quality m The TV guide only for digital stations tells you of any schedule changes at short no tice and provides an overview of all the stations schedules for the next few days Quite a lot of content such as programme data channel logos players images frag ments etc can be reached via the inter net through internet connection thanks to the online feature of the TV guide Detailed information for each channel if provided by the broadcasting channel is in cluded in the electronic programme guide m You can connect various data media for ex ample an external hard drive a USB memory stick or a digital camera to the USB sockets Using the file browser you can then select and play the file formats you want for example MP4 MP3 or JPEG data m With the Time Shift function you can easily stop and resume a programme with the remote control in a fast and simple way Programme is recorded to the external data medium 6 ENGLISH Smart Inter ctive TV 3 0 feature provides your TV with Internet applications when your TV is connected to Internet You can surf through the web pages visit popular video and photo sharing sites as well as social networks with these applications m Wireless
27. and use or gt to select the input Source 4 Select the line Service Type with w or A and use or gt to select the pre ferred option ATV DTV Radio or DATA 5 Select the line Channel with w or A and use or gt to select the preferred channel Note m The line Channel is only active when the input signal currently in use has been set If no entry has been made then the first chan nel of the selected input source will be used 6 Select the line Volume with W or A and use or gt to set the volume 7 Select the line Set Hour with Ww or A and enter the time with 1 0 8 Press eeee blue to save the setting 9 Press BACK lt to go back one menu level or press EXIT to end the setting Auto Off In the Auto Sleep menu you can enter a switch off time for the television The television switches to stand by after the entered time has elapsed 1 Select the line Auto Off with w or A and press OK to confirm 2 Select the line Mode with W or A and use or gt to select when the televi sion should switch off 3 Select the line Set Hour with w or A and enter the time with 1 0 4 Press eeeex blue to save the setting 5 Press BACK lt to go back one menu level or press EXIT to end the setting Date and time settings 1 Op
28. available Note that with many external devices the res olution of the video signal must be adapted to the input sockets on the television check the external device s instruction manual You can find out which values you need to set by referring to the guidelines in the sec tion about connection options m Do not connect any other equipment while the device is switched on Switch off the oth er equipment as well before connecting it m Only plug the device into the mains socket after you have connected the external de vice 68 ENGLISH USING EXTERNAL DEVICES Connecting an external device With a digital audio video signal m Suitable devices Digital satellite receiver game console BluRay player DVD player recorder settop box notebook PC m Video signal digital image definition stan dard 576p HDTV 720p 1080i 1080p m Audio signal digital sound stereo multichan nel compression uncompressed m Channel position HDMI1 HDMI2 HDMI3 or HDMIA 1 Connect the HDMI1 HDMI2 HDMI3 or HDMI4 ARC socket on the television and the corresponding HDMI socket on the external device using a stan dard HDMI cable digital video and audio signal With an analogue video signal progressive m Suitable devices DVD player recorder game console m Video signal YUV definition standard 576p HDTV 720p 1080i 1080p m Audio signal stereo analog Channel posit
29. box As your television may tipover without a stand or with a different stand this will create risk of safety Things to do for energy saving Do not leave your television turned on if you are not watching it switch it to standby If you will not use your television for a long time leave it in off mode by switching off from the mains if any or by unplugging m Prevent surrounding noises in the room where you watch your television Keeping the volume of your television at regular levels will help you to save energy m When determining the position of your tele vision try to place it so that the sunlight will not fall directly onto the screen of the televi sion but will come from behind of it Thus you can use your television without increasing the contrast setting and save energy ENGLISH 5 GENERAL INFORMATION Special features of your television set m Your television set enables you to receive and watch digital stations via DVB S DVB T and DVB C including the High Definition HD ones At present reception for these digital television stations in High Definition is only possible in some countries in Europe m Although this television meets the current DVB S DVB T and DVB C standards as of August 2012 its compatibility with future DVB S digi tal satellite broadcasts DVB T digital terrestrial broadcasts and DVB C digital cable broad casts is not guaranteed m This television can receive and process all
30. electricity bills m If you will not be using the TV set for several days it should be disconnected from the mains for environmental and safety reasons TV will not consume energy in this condition m If the TV set has main switch it will be enough to turn the TV off via main switch TV will re duce energy consumption almost to Zero Watt m TV consumes less energy on stand by mode However some TV sets may have features such as on timer that require the TV set to be left in standby to work correctly m TV consumes less energy when brightness is reduced Notes on still images Watching the same image for a long time on the screen may cause a still image remain feebly on the background Feeble image s on the back ground is originated from LCD LED technology and does not require any action under guaran tee To avoid such cases and or minimize the impact you may observe the tips below Do not allow the same TV channel to stay on the screen for a very long time Channel logos may cause this situation Do not allow the images which are not full screen to constantly stay on the screen if not streamed in full screen format by the broad caster you can convert the images to full screen by changing picture formats m Higher brightness and or contrast values will lead this impact to appear faster therefore you are recommended to watch your TV in the lowest brightness and contrast levels ENGLISH 7 CONNECTI
31. home network via a LAN connection or without cable via WLAN only with Grundig WiFi USB Dongle ask your specialist dealer There are two options with the LAN connection Automatic connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS are obtained from modem automatically Manual connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS must be configured manually 14 ENGLISH There are various options when using WLAN Automatic connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS are obtained from modem automatically Depending on the router you can use the fol lowing options Option WPS PBC Push Button Configura tion Connecting with a WPS PIN Connecting by entering the network pass word Manual connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS must be configured manually Note m If you want to connect your television to the home network via wi fi you need to connect the wi fi USB dongle 2 to the USBI1 or USB2 HDD socket Tuning television channels Depending on the type of antenna connected you can decide which channels you would like the television to search for DVB S Tunes digital television channels from the satellite from page 17 Y
32. if the connection is established Connection To Gateway Success message will be displayed 8 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success message will be displayed Q9 Press EXIT to end the settings Note m f you do not have a dynamic network fol low the instructions in manual connection section ENGLISH 33 NETWORK SETUP Manual connection Certain networks require Static IP address If your network requires a Static IP address you must enter the IP Address Netmask Gate way and DNS values manually You can get IP Adress Netmask Gateway and DNS values IPS from your Internet Service Provider 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played 4 Select the line Change Connection Type VW or A and press OK to confirm 5 Select the option Wired with or gt and press OK to confirm 6 Select the line Network Configuration with W or A sand use or gt to select Manual 7 Sel
33. is displayed 4 Select the line Automatic Channel Search with W or A and press OK to con firm 5 Select the option Air or Cable with or gt and confirm the source you are re ceiving analog broadcast from by pressing OK 6 Select the option Digital with or gt and press OK to remove the small tick 7 Press e red to start searching Notes m After starting the scan a security query will appear Press ee green to confirm the option Yes All channel and favourites lists for the analogue channels will be deleted and compiled new The Analog Searching menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The search is complete as soon as the Search is completed appears ENGLISH 81 SPECIAL SETTINGS Note m The search can be ended prematurely with EXIT 8 Press eee yellow to switch to the Chan nel Editor Or press EXIT to end the setting Tuning the analogue television channels by entering the channel numbers 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Manual Channel Search with W or A and press OK to con
34. is only active in HDMI mode and for resolu tions at or above 720p ENGLISH 31 NETWORK SETUP To use the functions GRUNDIG AppLICA Wired network TION store and Operation with Digital Media Server you must connect the television to your Wired network connection home network with internet access and log on 1 Connect the output of external modem to Grundig Application Store is a depot where you LAN socket with Cat 5 cable can find various applications that you may use on your Grundig TV You can download many applications from Grundig Application Store These applications include video picture music social networking applications news and sports applications weather forecast applications and some specific applications Network connection You can establish a wired or wireless connection between your television and the local network If you want to use a wired network connection please start with the instructions here If you use a wireless network connection please follow the instructions in the Wireless network connection section on page 35 Note m The following section describes connecting to the home network if you did not carry this out during the initial setup Note m Connection cables are not supplied 32 ENGLISH NETWORK SETUP Wired network settings There are two ways of making the wired network settings A Automatic connection All data r
35. lock individual channels Parental control You can also add channels to the favourites list in addition you can change the order of chan nels within the favourites list In Channel Editor press P to switch the chan nel list to the next page press P to switch it back to the previous page To perform searching in the Channel Editor menu by Channel names press e red To display the channels in the Channel Editor menu by Antenna Type press ee green and OK To use filters and tools in the Channel Editor menu press eee yellow 11 HD1 ae Ee 080i y 4 Channel Editor Das Erste DTV HD Sport DTV DTV TV Sport DTV EB Search for Channels HD Test Opening the Programme Table 1 Open the menu with MENU 2 Activate the Settings menu with OK 3 Select the option Source Setup with gt or and press OK to confirm 4 Select the line Channel Editor with w or A and press OK lt to confirm Channel Editor menu is displayed Important m Programme table and favourite lists are stored separately for all sources satellite cable and air m Programme table of the current source will be displayed when you select programme table Notes m A Cl module and smart card is required to watch the channel if there is a A sign next to the channel name in Programme Table m As the recorded data channels are no
36. or A and then select the option Auto Off or On with or gt ENGLISH 63 CONVENIENCE FUNCTIONS 6 Press BACK m lt to go back one menu level or press EXIT to end the setting Note m If the option Auto is selected in the line Time Adjustment the television set auto matically adapts the time to the time signal from the respective broadcaster However different channels may also use time bases which are different to those of your country e g foreign broadcasters In these cases reminders and planned recordings may be annulled due to the time difference Parental settings 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item Parental Guidance with gt or and press OK to confirm Parental Guidance menu is displayed wl Parental Guidance Parental Guidance Menu Lock Keypad Lock Change PIN C Back ExT Exit gt Change Area Note Additional operations are explained in the following sections Parental Guidance There are movies with content or scenes which are not suitable for children Certain programmes contain information which identities such content or scenes and have been given an access level from 4 to 18 You can se lect one of the access levels and thus authorise the playback 1 From the Parental Guidance menu use VW or A lt to select the line Parental
37. rating select Rate with w and press OK to confirm 5 Press OK to finish the process Adding Internet applications to favorites You can add frequently used Internet applica tions to favorites and collect these under Favor ites heading under categories 1 Press e red button in My apps menu and select categories with or gt 2 Select the application you want to add to favorites in MyApps menu with w XAK OF gt 3 Actiade the tools menu by pressing eeee blue select the option Add To Fav with or gt and press OK to confirm amp is marked and application is added to favorites ENGLISH 45 SMART INTER CTIVE TV 3 0 FEATURE Smart Inter ctive TV 3 0 browser main menu 1 Applications 2 Push button to the Application store 3 Search bar 4 Categories menu 5 Tools menu 6 Exit Navigating in the main menu 6 V A gt allows sliding of the navigation keys in the applications and 1 Press e red button in My apps menu virtual keyboard and select categories with or gt 7 Press OK to confirm the selections in 2 Select the required application with w ae virtual keyboard and applications A or gt and press OK to con firm 8 1 0 e red ee green eee Main menu of the application will be yellow eeee
38. setting Change TV Name To make it possible to identify your TV in the net work the name Inter ctive TV is assigned at the factory You can change the name 1 Open the menu with MENU Activate the menu item Settings with OK 3 Select the menu item TV Settings with w or A and press OK to confirm 4 Select the line About with w or A and press OK to confirm 5 Select the line TV Name with w or A and press OK to confirm 6 Delete the current name To do this select the Clear button with w A or gt and confirm with OK 7 Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select Xk to delete the character entered and press OK to confirm 8 Confirm the new name by pressing ee green 9 Press EXIT to end the setting ENGLISH 39 NETWORK SETUP Connecting the TV to a hidden network Even if the SSID Service Set Identifier of the router is not visible you can connect your TV to this network 1 2 Open the menu with MENU x Activate the menu item Settings with OK Select the menu item Network Configura tion with gt or and press OK to confirm Network configu
39. to confirm 6 Select the folder with w or A and press OK to open it A list of sub directories appears Note m Go back to the previous folder with BACK lt anx 7 Select the track or picture with W A or gt and press gt to start playing Notes m When playing picture data press to view information about the resolution and the size m For playing MP3 or WMA data information on the album track and singer is displayed at the left of the menu m When playing picture data to access DivX Settings menu press and then use gt to select DivX and confirm with OK m When playing picture data press to switch on a control panel 8 Press J to pause playback 9 To resume playback press gt 10 Press fx to end playback The file browser appears 54 ENGLISH Notes m Use A to select Up Folder when you would like to return to the last folder m It is possible that some files that are sup ported in USB mode do not operate due to some problems that may arise depending on how such files are created compression although they contain the supported file ex tension m f there are more then one audio sources audio stream in the video files that are be ing played then you can switch between the audio sources with the 7 2 while the file is played in full screen mode Movies you will be watching from the movie
40. to TV channel lists by calling up the channel lists again with OK press eeeex blue using or gt to select the option Digital and confirm with OK m To save energy you can turn off the screen in Radio mode see CONVENIENCE FUNCTIONS on page 60 Selecting stations from lists You can select stations from various lists e g ALL FAV1 FAVA 1 Press FAV to recall the favorite list menu Select Favorite menu is displayed 2 Select the channel list with or gt and open it with OK 3 Select the channel with or gt and press OK to confirm 4 Press EXIT to exit the channel list Selecting AV channels 1 Open Select Source menu with f gt 2 Select the desired AV channel position with or gt and confirm with OK 3 Use 1 O to switch back to the television channel Note m The AV preset descriptions can be changed See Settings section on page 22 Adjusting the volume 1 Adjust the volume with atl lt Muting 1 Use to switch the sound off mute and to switch it on again Displaying information 1 Display information press repeatedly The display disappears automatically after a short while Picture settings 1 Open the Tools menu with TOOLS 2 Select the line Picture Mode with Ww or XA 3 Select the picture setting by pressing or g
41. with OK 4 Select the menu item Sound Settings with gt or and press OK to confirm Sound Settings menu is displayed 5 Select the line Advanced with Ww or A and press OK to confirm 6 Select the line Audio Out with w or XA 7 Select the option Fixed or Adjustable with or gt Notes m f you select Adjustable the volume can be changed in the menu option Audio Out Volumex m If you want to obtain the audio output only from hi fi system AV receiver select the op tion Off in the line TV Speaker with or gt 8 Press EXIT to end the setting ENGLISH 71 WIRELESS SCREEN SHARE LIVESHARE What is LIVESHARE Note m To find out if your laptop PC or mobile device supports Liveshare feature or not please visit the Website of the manufacturer m Liveshare is a wireless technology featured with Android operating system and used to reflect the screen of your mobile device which supports this feature to your television support ing Liveshare By using this technology you can share your device s content present a slide show or play your favorite game on a larger screen Screen share with Liveshare con nection 1 Connect Grundig WiFi USB dongle to the USB1 or USB2 HDD socket of your television in order to connect the television to a w
42. A and press OK to confirm 5 Select the line Digital Teletext with w or A 6 Select the option Off with or gt Note m To reactivate digital teletext select On in step 6 7 Press EXIT to end the setting INFORMATION GRUNDIG 40 VLE 6421 BL Product Fiche Energy efficiency class Screen size 102 cm 40 Power consumption in operation mode 63 W 80 W max Annual power consumption 92 kWh Stand by power consumption lt 0 50 W Max resolution WUXGA 1920 x 1080 Other data Operating voltage 220 240 V 50 60 Hz Screen Area dm2 44 dm Rosh Limits Pb Lead Hg Mercury Pb Lead complies with ROSH directive O mg Peak Luminance rate 65 Audio out 2 x 20 watt music 2 x 10 sinusoidal wave 15 W sinusoidal wave Subwoofer Subwoofer feature is optional Not available in all models Default satellite 20 LNB Power 13 18V 14 19V optional max 500mA LNB switching signal 0 22 kHz 650mV 250mVpp DiSEqC 1 0 control 1 1 control 1 2 control Reception range Satellite Ku band 10700MHz 12750MHz Modulation DVBS QPSK DVBS2 QPSK 8 PSK IF band 950 MHz 2150 MHz Signal level 25dBm to 65 dBm Cable Full band 110MHz 862MHz Modulation 16QAM 32QAM 64QAM 128QAM and 256QAM Symbol rate 4 0Msym s to 7 2Msym s Digital DVB T VHF UHF Band width 7 MHz and 8 MHz FFT size 2k 8k Modulation 16QAM 64QAM QPSK Secu
43. Enter your Name and Surname onu Select the letters for the information with EE A pa V A or gt and confirm with OK After you ve entered the data use V A and gt to select BACK and press OK lt to confirm Press W for the next line and press OK 2 Press OK lt to start registration to display the keyboard To pass to next screen press eeee blue to display keyboard press OK 3 Select necessary text areas with W A or gt and press OK to confirm Virtual keyboard will be displayed Note Notes on data entry m Press e red to display the previous screen m Press ee green for keyboard language 4 Enter your E mail address Enter the data use W A and gt m Data will be entered through virtual key to select BACK 4 lt and press OK to board Select necessary letters numbers and press OK to confirm confirm To pass to next screen press eeee blue m For upper lower case select Shift and to display keyboard press OK and press OK to confirm P 5 Enter password and accept m Press e red to switch to mobile keyboard Select the letters for the information with VW A or gt and confirm with OK After you ve entered the data use V A and gt to select BACK and confirm with OK When en
44. LCD TV with LED Backlight 40 VLE 6421 BL AUS GUTEM GRUND GRUNDIG TABLE OF CONTENTS N NNN O amp O O o 60 10 10 1 12 13 14 14 15 16 19 23 29 27 27 28 29 29 3 32 32 32 35 39 40 SET UP AND SAFETY GENERAL INFORMATION Special features of your television set Receiving digital stations GRUNDIG SCR System Important notes on environmental protec tion Notes on still images CONNECTION PREPARATION Connecting the antenna and power cord Inserting batteries in the remote control OVERVIEW Connections on the television set Control buttons on the TV Remote control main functions Remote control all functions SETTINGS Initial set up Initial set up overview Arrange Initial set up Changing the Channel Editor for the digital channels Picture settings Sound settings TELEVISION OPERATION Basic functions Zoom function Zap function Electronic TV guide RoviGuide Changing the picture format NETWORK SETUP Network connection Wired network Wireless network Change TV Name Connecting the TV to a hidden network 2 ENGLISH Al Al A2 43 44 48 48 49 49 50 50 S 5l 52 52 54 59 56 56 56 57 57 57 37 SMART Inter ctive TV 3 0 FEATURE SMART Inter ctive TV 3 0 internet ap plications Creating a Grundig Application Store account Logging in with Grundig Application Store account Grundig Application Store Playing th
45. OK to remove or apply the small tick 5 Select the option Cable with or gt and press OK to confirm 6 Select whether to search for digital or ana 8 Press e red to start searching logue TV channels Notes l To to this press or gt to select the m When updating via the same satellites a tion Diaital Jacl ree l S E E E option Digital or Analogue and confirm A query Is display with OK search 7 With w select Frequency MHz and enter frequency 4 digit directly with 1 0 search will start The search is finished when the channels found appear in the list m f the previously stored channels should be retained in the channel list and the new channels found be added to it then press ee green E f e red is pressed the saved channels will be deleted from the current channel list The Digital Searching menu appears and the scan for TV channels begins The search is complete as soon as the message Search is completed appears Note m The search can be aborted with EXIT 68 Press EXIT to end the setting 9 Switch to the Channel Editor with eee yel low or press EXIT to end the setting ENGLISH 79 SPECIAL SETTINGS Searching for digital terrestrial TV channels automatically 1 2 3 Open the menu with MENU x Activate the menu item Settings with OK Select the men
46. ON PREPARATION Connecting the antenna and power cord 1 To receive digital satellite channels DVB S connect the satellite antenna cable to the antenna socket SATELLITE on the televi sion set and or 2a To receive terrestrial digital broadcasters DVB T connect the cable for the rooftop or indoor antenna passive or active indoor antenna with its own power supply to the antenna socket ANT IIN on the television set or 2b To receive digital cable channels DVB C connect the cable for the rooftop antenna to the antenna socket ANT IN on the televi sion set a 2c To receive analogue TV channels connect the cable for the rooftop antenna to the antenna socket ANT INkx on the television sel 8 ENGLISH Note m When connecting an indoor antenna you may have to try it out at different positions until you get the best reception 3 Plug the power cord into the wall socket Note m Only plug the device into the mains socket after you have connected the external de vices and the antenna m Do not use an adapter plug or extension cable which does not meet the applicable safety standards Do not make changes on the power cord CONNECTION PREPARATION Inserting batteries in the remote Environmental note control E This symbol on the bat tery or on the packaging Pb indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbo
47. S Video signal E Suitable devices DVD player recorder video recorder camera recorder notebook PCs m Video signal Y C m Audio signal stereo analog Channel position S VIDEOx 1 Connect the AV1 S VHS socket on the television to the corresponding socket on the external device using EURO AV cable video and audio signal Using a DVD recorder DVD player video recorder or set top box 1 Switch on the video recorder DVD player or settop box and select the function you wish to use 2 Press f gt and use or gt to select input signal SCART S VHS HDMI1 lt HDMI2 HDMI3 HDMI4 ARC or COMPONENTzg and press OK to confirm 70 ENGLISH Headphones Connecting headphones 1 Plug the headphone jack 3 5 mm jack plug into the headphone socket of the television Selecting the sound settings for the headphones 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Sound Settings with gt or and press OK to confirm Sound Settings menu is displayed 4 Select the line Advanced with W or A and press OK to confirm 5 Select the line Headphone Volume with W OF A lt 6 Adjust the volume with or gt 7 Press EXIT to end the setting Note Prolonged listening at loud volumes with the earphones can damage your hearing H
48. Sound Settings with gt or and press OK to confirm Sound Settings menu is displayed I Sound Settings Sound Mode Night Mode Advanced Back xT Exit gt Change Area Note m Additional operations are explained in the following sections Sound Mode 1 Select the line Sound Mode with W or XA 2 Press or gt to select the option Stand art Mode Movie or User SRS StudioSound HD SRS StudioSound HD is a patented audio tech nology which is integrated into the television set and only requires the built in speakers to gener ate a Surround Sound effect SRS StudioSound HD Technology is supported in Film Natural Soeech and Music settings 1 Select the line Sound Mode with W or XA 2 Select the option Natural SRS Speech SRS or Music SRS with or gt S S SRS Labs Inc trademark StudioSound HD technology is produced under SRS Labs Inc license Night Mode Night Mode prevents sound fluctuations and vol ume increases 1 Select the line Night Modex with W or wAr 2 Activate On or deactivate the night mode by pressing or gt Note m Night Mode appears in menu if SRS has been selected in Sound Modex Note m Other settings are available under Ad vanced Select the line Advanced with VW or A and press OK to confirm Stereo dual chan
49. T 31 Select the option Air with or S and p press OK to confirm Important m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna 32 Select the line Active Antenna Power with VW or A Switch on the antenna power supply for the antenna with or gt On 33 Select the line Next Page with w or A and press OK to confirm Note m Perform Channel Type selection Press or gt to select whether you want to search for only digital channels Digital only Ana log channels Analog or both Digital Analog and press OK to select and mark or unmark the Digital and Analog items 34 Press e red to start searching The Automatic Channel Search menu appears and the search for TV channels begins The scan is complete as soon as the Search is completed appears 35 Select the Channel Editor with e red SETTINGS Changing the Channel Editor for the digital channels Channels found at the end of the search are stored in the Channel Editor You can delete channels which are not required from the programe table you can change the order of channels within the programe table and
50. The programme selected can be recorded if an external data medium is connected To do this select the Watch button with gt press W to select the Record button and confirm with OK Confirm the display with OK m To add the programme selected to the re minder timer select the Watch button with gt press VW to select the Remind but ton and confirm with OK Confirm the dis play with OK 5 Return to the programme overview with BACK lt x 6 Press gt to select information on the next programme and x to return to the infor mation for the current programme 7 Switch back to the channel selection with Note m You can filter certain types of programmes To do this press to select the option All and press W or A to select the desired programme type and confirm with OK 8 Press EXIT to close the channel guide 30 ENGLISH The Electronic TV guide in Online mode Search and Suggestions options comes in the electronic programme guide in the online mode as different from the offline mode A lot of content can be received via the Internet with these options such as programme information channel logos information about actors pic tures fragments etc only for digital channels 2 Press gt GUIDE to start Electronic TV guide Electronic TV guidex is displayed Press twice to display the top m
51. USB keyboard and mouse support in the Web browsing of your television facilitates surfing through the internet pages for the user m DLNA feature allows you to use a wired or wireless with wireless USN network device local network to access your content that were recorded with DLNA compatible devices we use at our daily lives such as a PC mobile phone or NAS Network Attached Storage which are operated as DMS Digital Medial Server While watching TV you can play any content you like at any time by using DMC ap plications on your mobile device or PC without starting DLNA application m By using DMR feature of your television you can start playing contents on another mobile device or PC and you can perform controls from these devices in lieu of the TV For this you need to have DMC Digital Media Con troller devices on your devices In this way by starting DLNA application on your TV with DMC supported applications or without hav ing to start the same you can start and control the content from your mobile devices or PCs m Devices that contain and serve video music or image files are called Server This tele vision receives video music and image files from the server through home net work allowing you to access and play such media even when your television is located in a different room then the server A DLNA compatible device such as a PC mobile phone NAS or a NAS like Network attached storage device which operat
52. WORK SETUP 12 Select the line Gateway with w Enter Gateway address with 1 0 13 Select the line Select Access Point with A or W and press OK to confirm Select Access Point menu is displayed by scanning available wireless networks 14 Select the network that you want to connect with W A or gt and confirm with OK Wireless connection password screen is displayed Note m For device to discover the wireless modem on the network the network name should support ASCII characters 15 Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select x to delete the character entered and press OK to confirm 16 Confirm the password with ee green Connecting Please wait message will be displayed and if the connection is established Connection To Gateway Success messages will be displayed 17 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 18 Press EXIT to end the
53. XA 2 Press or gt to switch the function On 3 Press EXIT to end the setting USB OPERATION Selecting the display duration of the slide show 1 Select the line Slide Show Interval with W or A 2 Select the time 3 5 10 seconds with Or gt 3 Press EXIT to end the setting Subtitle settings If the film has subtitles you can turn on and off this subtitle change its size colour or eliminate synchronisation shift with the subtitle 1 From Media Options menu use W or A to select Show Subtitle Subtitle Size Subtitle Color or Subtitle Offset Value 2 Adjust with or gt 3 Press EXIT to end the setting Note m These adjustments can only be made for external subtitle files These adjustments can not be made in subtitles combined with the movie DivX Plus HD VOD You must have your device registered in order to play the protected video that you will buy from DivX 1 In the Media Player menu press eeee blue Registration Code appears 2 Visit http vod divx com and register the device with the registration code 3 Press EXIT to end the setting DIVX DivX Certified to play DivX and e DivX Plus HD H 264 MKY up HD to 1080p HD including high qual ity content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is
54. address you must enter the IP Address Netmask Gate way and DNS values manually You can get IP Address Netmask Gateway and DNS values IPS from your Internet Service Provider 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played 4 Select the line Change Connection Type with W or A and press OK to con firm 5 Select the option Wireless with or gt and press OK to confirm WiFi warning screen will be displayed 6 Activate WiFi with ee green 7 Select the line Network Configuration with W or A and select the option Manual with or gt 8 Select the line Advanced with Ww or A and press OK to confirm IP Address DNS Netmask and Gateway options are active Network Configuration Change Connection Type Wireless WiFi On Select Access Point N A Network Configuration VETE l 000 000 000 000 gt 000 000 000 000 lt Change Area Back xT Exit Select the line IP Address with W Enter IP address with 1 Ox 10 Select the line DNS with w Enter DNS address with 1 Ox 11 Select the line Netmask with W Enter Netmask address with 1 O NET
55. al Euro AV socket CVBS sig nal RGB signal video sig nal input for S Video camera with Scart S VHS converter Antenna socket Satellite antenna socket HDMI socket audio video signal input HDMI OVERVIEW HDMI3 LAN HDMI2 HDMI USB2 HDD USBI Cl HDMI socket audio video signal input HDMI Network cable connection socket HDMI socket audio video signal input HDMI HDMI socket audio video signal input HDMI USB Harddisk socket for external data medium Grundig WiFi USB dongle or wireless keyboard mouse port USB socket for external data medium Grundig WiFi USB dongle or wireless keyboard mouse port Common interface slot Control buttons on the TV ON OFF Power switch switches the television into standby mode and off Multi function switch Using the multi function switch I SEL on the television different settings can be made There may be no menus visible on the screen Pressing the switch switches in the television from standby mode In operation Pressing the switch displays the navigation menu Moving the switch up or down selects the desired menu item Set to Volume Navigation Set to Channel Navigation Open Input Source Menu Go to Standby Access function setting by pressing Moving the switch up down selects the func tion setting ENGLISH 11 OVERVIEW Remote control main functions Turns on and off the t
56. an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This device has to be registered with DivX Certified in order to play DivX Video on Demand VOD movies you have purchased Enter DivX VOD section on USB settings on your device to receive your registration code Visit vod divx com for detailed information on completing your registration Note m DivX DivX Certified DivX Plus HD and associated logos are trademarks of Rovi Cor poration or its subsidiaries and are used un der license Covered by one or more of the follow ing U S patents 7 295 673 7 460 668 7 51 5 7 10 7 519 274 ENGLISH 53 USB OPERATION Playback basic functions 1 Open the menu with MENU 2 Select the menu item Media Player with gt or and press OK to confirm Media Player menu is displayed 3 Select the external data medium with or gt and press OK to confirm Media Player menu of the selected exter nal data medium is displayed Note m f the content of the external data medium is not displayed press eee yellow to re fresh 4 Select the push button Type with A and gt and press OK to confirm 5 Select the desired type Movie Music or Photo with or gt and press OK
57. and control such equip ments with the remote control of the television This feature must also be supported by the de vice you will connect You television supports the following functions For detailed information about this function read user manual of the external device Turning on external device from standby mode When you switch on your external device e g DVD player from standby mode your television will be turned on from standby mode as well and it will switch to the HDMI source that the ex ternal device is connected to Depending on the features of the external device e g AV receiver can start and your television can stay on stand by mode Selecting the HDMI source from the television When you switch on your external device e g DVD player your television will switch to the HDMI source that the external device is con nected to your TV should be open Selecting the menu language When you select menu language on your TV menu language of the external device will change as well If your DVD player supports Switching off the device from standby mode After switching your television to standby your external device e g DVD player will also switch to standby if it is switched on DIGI LINK is always active on your television Refer to the user manual of your external device to learn how to activate this feature on it 66 ENGLISH Searching and selecting the active external device You ca
58. arch is complete as soon as the message Search is completed appears ENGLISH Note m The search can be aborted with EXIT 10 Switch to the Channel Editor with eee yel low Or press EXIT to end the setting Searching for digital terrestrial TV channels manually 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm 4 Select the line Advanced Settings with VW or A and press OK to confirm 5 Select the line Active Antenna Power with VW or A Switch on the antenna power supply for the antenna with or gt On Important m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna 6 Select the line Manual Channel Search with A or W and press OK to con firm 7 Select the option Air with or gt and press OK to confirm Manual Channel Search menu is dis played 8 Enter frequency 3 digit directly with 1 0 Search will start The search is finished when the channels found appear in the list 9 Press EXIT to end the setting SPECIAL SETTINGS Autom
59. at is common interface Inserting the CA module Access control for CA module and smart cards 75 f3 76 76 77 78 79 80 80 8 8 82 84 84 84 85 85 85 86 86 86 86 87 SPECIAL SETTINGS Searching for all digital television chan nels from a satellite automatically Searching for digital television channels from a satellite manually LNB Settings Motor antenna setup DiSEqC 1 2 Searching for television channels from the cable provider automatically Searching for television channels from the cable provider manually Searching for digital terrestrial TV chan nels automatically Searching for digital terrestrial TV chan nels manually Automatic service update Tuning analogue television channels Changing stored analogue channels Displaying signal information Deactivate and activate HbbTV Deactivate and activate digital teletext INFORMATION Product plug Other data Service information for dealers Network interfaces Disposing of the packaging Environmental note Troubleshooting ENGLISH 3 SET UP AND SAFETY Please note the following information when set ting up your television set m This television set is designed to receive and display video and audio signals Any other use is strictly prohibited m Best viewing distance is 5 times the diagonal length of the screen m External light falling on the screen impairs pic ture quality To assure sufficient ventilation make sure t
60. ather forecast applications and some specific applications Notes m Availability of SMART Inter ctive TV 3 0 inter ctive applications may vary from one country to the other Smart Inter ctive TV 3 0 cannot download and save files cannot upload files to a web site and cannot install add ins except Login pages of some applications for applications other than the ones in Grundig Smart Apps m Grundig is not responsible for the content and the quality of content offered by the content providers m Local and global internet applications pro vided through your Smart Inter ctive TV 3 0 comes with your TV within the framework of special limited duration agreements entered into with the application owners Applica tion owners may update modify restrict or entirely remove those applications with their own decision Grundig cannot be held re sponsible for such changes m Grundig reserves the right to make all chang es such as modifications restrictions exten sions transfers and removals on internet applications provided through your SMART Inter ctive TV 3 0 In Login process of some applications it may be required to connect to the web page of the related application Subject web pages may contain links not related to Login pro cess When connecting those links TV may access open web and view contents that are not supported by your TV As you are on open web your TV cannot control those unsupported contents or cannot
61. atic service update If this function is activated possible changes of network operators are updated automatically The unit must be located in stand by mode This updating affects all types of reception ter restrial cable and satellite 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Advanced Settings with V or A and press OK to confirm 5 Select the line Automatic Service Update with W or A and select the automatic update with or gt On 6 Press EXIT to end the setting Tuning analogue television channels This setting is only necessary if you cannot re ceive any digital channels and you have not car ried out an analogue search during initial setup The television channel can be set directly or using the search Setting all analogue television channels The analogue television stations are listed in the channel list after the digital television stations Note m Plug the rooftop antenna cable for ana logue television stations into the ANT IN socket on the television 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu
62. be held re sponsible for them Starting Smart Inter ctive TV 1 Open the menu with MENU 2 Select the menu item Applications Store with or gt and press OK to confirm Inter ctive Applications menu will be displayed During initial login registration screen for GRUNDIG Application Store will be displayed Notes m If you press when no menu is open you can access Quick Apps menu m f you attempt to start Inter ctive applica tions without a cable or wireless adapter connected the related warning is displayed on the screen If your wired or wireless adapter is connected but you cannot receive IP or internet is not connected the Inter ctive applications cannot be started In this case check Network connection settings see page 32 or 35 USB keyboard and mouse You may connect a keyboard or mouse to both sockets USB1 or socket USB2 HDD to use in the Web browser Keyboards and mice requiring special drive are not supported ENGLISH 41 SMART INTER CTIVE TV 3 0 FEATURE Navigation and entering text Creating a Grundig Application during registration Store account 1 Press to open MyApps ee You must register to access all applications in Grundig Smart Apps registry screen is Grundig Application Store displayed 1 Press to open MyApps menu Grundig Smart App registry screen is displayed 2 Press OK to start registration Welcome to 3
63. ck m If a Blu ray Player is connected to the AV receiver please remove the Disc from the Player during the registration 6 Open the menu with MENU 7 Activate the menu item Settings with OK 8 Select the menu item Sound Settings with gt or and press OK to confirm Sound Settings menu is displayed 9 Select the line Advanced with wW or A lt and press OK to confirm 10 Select the line ARC with W or A 11 Press or gt to select On Manufactured under license from Dolby Laboratories Dolby and double D symbols are trademarks of Dolby Laboratories Notes m The internal speakers of the television are switching off automaticaly m The volume of the AV receiver you can adjust with the remote control of the television m For switching off the HDMI ARC function se lect Off with or gt m The ARC function will be deactivated while switching off the television and the internal speakers are active again 12 Press EXIT to end the setting Playing the audio signal via the HiFi system 1 Connect the socket 2 on the television and the corresponding socket on the hi fi system AV receiver using a adapter cable Note m When this function is activated the hi fi sys tem AV receiver connected to socket f transmits the audio signal 2 Open the menu with MENU 3 Activate the menu item Settings
64. der Ad vanced 5 Select the line Advanced with w and press OK to confirm 6 Select the required line function with w or A and press OK to confirm Select the value option with or gt and press OK to confirm Press BACK lt to return to Picture Set tings menu 7 Press EXIT to end the setting Enhanced picture settings The enhanced picture settings are in principal digital image improvements which however should be only used when necessary when pic ture quality and transmission is excellent They may well improve the display with poor material but may adversely affect the display where trans mission and picture quality are excellent m Backligh Manual setting for back light ing only active if dynamic back lighting is switched to OFF This setting also directly impacts power consumption Dynamic Backlight Here the device opti mally adjusts the back lighting for the picture content by regulating the back lighting de pending on the average picture brightness If a picture has predominately dark areas then the black level displayed is improved by downward adjustment of the back lighting in this case the display of the dark areas is im proved and with predominantly bright pic ture material the back lighting is maximised in order to display these areas more brightly m Vibrant Colour Increases the colour con trast and the contra
65. e m This is a Class A product During operation the device can cause radio interference In this case the user may have to remedy this Please contact your specialist dealer 88 ENGLISH
66. e selected channels with W or A and store with OK The channels are marked in the Channel Editor with or You can add the same channel in more than one favourites list Each favourite list can contain maximum 255 channels Notes m You can delete channels from the favourites list Press eee yellow select the favorites list the channel is in with W or A and press OK to confirm Select the channel s you want to delete with W A or gt and highlight the channel by pressing OK Press eee yellow and select the line Re move from Fav with W A and confirm with OK The channel you have selected is now deleted from the favorites list m When a channel stored in the favourite chan nel list is deleted channel order in the favou rite list is updated 5 To exit the Channel Editor menu press EXIT Sorting channels in the favorites list You can change the channel sorting in the favor ites list 1 To select favorites list in the Channel Edi tor press eee yellow 2 Select the favorites list you want to sort with W or A and press OK to confirm Selected favorites list channels will be displayed 3 Select the channel s you want to move with VW A or gt and highlight the television channel by pressing OK Channel is marked with 4 Press eee
67. e video music and image files with home network connection Selecting the digital media server Playback Other playback options USB OPERATION File formats Connecting external data media Removing the external data media The file browser Settings in the USB setup menu Playback basic functions Additional playback functions TELETEXT MODE TOP text or FLOF text mode Additional functions INTERACTIVE PORTAL HbbTV What is HbbTV Using HbbTV Additional functions for video indexes TABLE OF CONTENTS 58 58 58 57 59 60 60 6l 6l 6l 6l 62 62 62 63 64 66 66 68 68 69 70 70 70 72 Tz 73 73 73 73 74 74 74 74 CONVENIENCE FUNCTIONS TV Settings Language amp Keyboard settings Accessibility settings Accessories Advanced settings Power save mode Functions in the About menu Software update OAD Software update Internet Software update USB Resetting the television to its original state Deleting channel history Timer settings Date and time settings Parental settings USING EXTERNAL DEVICES DIGI LINK High definition HD ready Connection options Connecting an external device Using a DVD recorder DVD player video recorder or settop box Headphones Hi fi system What is LIVESHARE Screen share with Liveshare connection PC MONITOR MODE Connecting a PC Selecting the channel position for the PC Settings for the PC OPERATION WITH COMMON IN TERFACE Wh
68. ear stating that HbbTV broadcast is available 1 Press e red to open HbbTV Information regarding the services will ap pear on the screen Additionally colored buttons necessary for browsing the menus will also appear Note m The range of subjects and selection of indi vidual subjects depend on the programme provider m Numeric buttons 1 through O are used for additional functions 2 Press ee green eee yellow or eeeex blue to select the desired topic field Heute 15 00 15 10 aPesi chau Tagesschau ALLE SENDER Ausblenden This service provided by ARD includes Das Er ste Mediathek along with teletext restructured graphically with high definition images ZDF service includes ZDF mediathek and other pro gramme information as of July 2012 This feature is only available in countries where the service is provided Do 15 08 Sa 08 03 So 09 Heute 16 00 16 10 Morgen Heute 15 10 16 00 taresichau Das Erste Tagesschau Das Erste Strum der Liebe 1938 THEMEN SUCHE Extras Mediathek Videotext 3 Select the option you want with W A or gt in the selected topic field and confirm with OK 4 Press e red to close HbbTV Additional functions for video indexes 1 Start playback with P Pause playback with Ii Resume playback with P Rewind by 4d forward by Pp Stop playback wit
69. ect the line Advanced with W or A and press OK lt to confirm IP Address DNS Netmask and Gateway options are active Network Configuration Change Connection Type Wired Network Configuration Manual 192 168 000 164 192 168 000 001 255 255 254 000 192 168 000 001 Netmask Gateway gt KE EO gt Change Area Back Exit Exit 8 Select the line IP Address with w Enter IP address with 1 Ox 9 Select the line DNS with w Enter IP address with 1 Ox 10 Select the line Netmask with w Enter Netmask address with 1 0 11 Select the line Gateway with w Enter Gateway address with 1 0 34 ENGLISH 12 With e red select Connect option to establish modem connection Connecting Please wait message will be displayed and if the connection is successful Connection to Gateway Suc cessful message will be displayed 13 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success fulk message will be displayed 14 Press EXIT to end the settings NETWORK SETUP Wireless network Wireless network connection There are different ways of making the wire less netw
70. ect the line Change Connection Type with W or A and press OK to con firm 5 Select the option Wireless WPS with or gt and press OK to confirm WiFi warning screen will be displayed 6 Activate WiFi with ee green 7 Select the line WPS Typex with w or A and select the option PIN with or gt Network Configuration Change Connection Type Wireless WPS On Select Access Point Network Configuration Advanced lt Change Area Back Exit NETWORK SETUP 8 Select the line Select Access Point with W or A and press OK to confirm Present WPS supported wireless networks are scanned to display in the Select Ac cess Point menu 9 Select the network that you want to connect with W A or gt and press OK to confirm 8 digit pin code is displayed in the wire less WPS menu Note m Refer to the manual of your router to find out how the PIN is entered via a PC 10 Use a PC to enter the pin on the router e g AVM FRITZ Box menu item WLAN Set tings WPS and save Note m The 8 digit PIN code must be entered in the modem interface in 2 minutes otherwise connection of television with the modem is cut 11 Press ee green to confirm the registra tion The message Connection to Gateway Success appears 12 Press ee green to check the performed settings and
71. een the modem and television Wireless network settings You have several ways to connect your TV to your home network A Automatic connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS are obtained from modem automatically Depending on the router you can use the fol lowing options Option WPS PBC Push Button Configura tion Connecting with a WPS PIN Connecting by entering the network pass word B Manual connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS must be configured manually ENGLISH 35 NETWORK SETUP Technical requirements Most of the home networks are Dynamic If you have a dynamic network you must use a DSL modem that supports DHCP Modems and IP sharers that support DHCP obtain the IP Ad dress Netmask Gateway and DNS values required for internet access automatically and thus you are not required to enter those val ues manually Wireless WPS network connection through by pressing a button 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played 4 Select the line Change Connection Type with W or A and press OK to con firm 5 Select the option W
72. egarding connection settings IP Ad dress Netmask Gateway and DNS are obtained from modem automatically B Manual connection all data regarding connection settings IP Ad dress Netmask Gateway and DNS must be configured manually Automatic connection Most of the home networks are Dynamic If you have a dynamic network you must use a DSL modem that supports DHCP Modems and IP sharers that support DHCP obtain the IP Ad dress Netmask Gateway and DNS values required for internet access automatically and thus you are not required to enter those val ues manually 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played Network Configuration hange Connection Type Network Configuration Advanced e Connect EyTest Connection KaG Change Area Back xT Exit 4 Select the line Change Connection Type VW or A and press OK to confirm 5 Select the option Wired with or gt and press OK to confirm 6 Select the line Network Configuration with W or A and use or gt to select AUTO 7 With e red select Connect to establish modem connection Connecting Please wait message will be displayed and
73. el sources press e red to cancel the function This means you will always receive an op timal picture This functions in the modi 480i 576i and 1080i in TV playback and for other channel SOUICES If the Film mode is switched on for pro grammes without a feature film signal minor problems such as picture freeze defective subtitles or fine lines in the picture could oc cur 3 Press EXIT to end the setting m MEMC Improves the display of moving images through the additional computation of intermediate pictures and is only avail able for devices from 32 It is displayed with a PPR of 400 Picture Perfection Rate If the adjustment value is too high this may result in ghosting with poor transmission due to the incorrect computation of the intermedi ate pictures E Nois Reduction Reduces the visible snow by displaying the picture a little less sharply and creating a slight blurring Should therefore be used minimally with good picture material m Block Noise Reduction This function can only be selected with digital reception sources and AV presets It reduces any in terference from artefacts pixel blocks from digital programmes due to MPEG compres sion such as from DVB T receivers and lower transmission rates or DVD players 24 ENGLISH SETTINGS Sound settings 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item
74. elevision Switches on from standby set stand by mode selects channels directly Switches between teletext and TV modes Selects the channel list ALL FAV 1 to FAV 4x Exits menu and applications Opens MyApps menu Displays information Zapping function switches the menus back one menu level Opens the menu Opens the channel list Opens the electronic TV Opens the Tools menu E guide opens closes the control aune E menu when playing a file in Pers i Opens the pre selection menu DLNA menu p for AV channels Adjusts the volume __ a8 Then make the selection with Turns volume on off mute or gt and press OK to accept Switches on from standby selects stations step by step amp 5 A My Media Opens Media Player menu Opens Screen share function Cursor Control A Moves the cursor up and down in the menus 4 Q gt Moves the cursor left right in i menus Opens channel list Vv i activates various functions 12 ENGLISH OVERVIEW Remote control all functions e red ee green Selects a page in teletext mode Selects activates various functions eee yellow in menus seve blue lt gt 44 gt gt qi Switches to double character size in teletext mode selects the previous track previous picture in the file browser Updates a page in teletext mode selects the next track next picture in the f
75. en is displayed 12 Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select to delete the character entered and press OK to confirm 13 Confirm the password by pressing ee green Connecting Please wait message will be displayed 14 Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages and MAC address will be displayed 15 Press EXIT to end the setting SMART INTER CTIVE TV 3 0 FEATURE SMART Inter ctive TV 3 0 inter net applications Smart Inter ctive TV 3 0 interactive applications provide your television with Internet services and pages These applications are designed according to your television With SMART Inter ctive TV 3 0 feature you can run many local and global internet applica tions Thanks to Grundig Application Store you can find many applications that you may use on your Grundig TV You can download many ap plications from Grundig Application Store These applications include video picture music social networking applications news and sports appli cations we
76. en menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item Timer Apps with gt or and press OK to confirm 4 Select the line Advanced with w or A and press OK to confirm Note Additional operations are explained in the following sections Auto tuning The television automatically detects the local dif ference to Greenwich Mean Time the selected channel provides a time signal 1 From the Advanced menu use W or A lt to select the line Date amp Time Set and press OK to confirm 2 Select the line Mode with w and then select the option AUTO with or gt Date and time are automatically updated 3 Press BACK lt to go back one menu level or press EXIT to end the setting Manual tuning You can set the local time difference yourself if the time is not detected or is not the same as your local time 1 From the Advanced menu use W or A to select the line Time Adjustment and press OK to confirm 2 Select tthe option Manual with or gt Time Zone and Daylight Saving are active 3 Select the line Time Zone with W or A and press OK lt to confirm The Time zone selection menu is dis played 4 Adjust the time zone with W or A and press OK to confirm 5 Select the line Daylight Saving with w
77. ence to picture and or sound Ghosting reflection No colour Picture but no sound Teletext missing or faulty Remote control does not work Picture is dark in PC mode DMS device cannot be found Antenna cable Is the antenna cable connected No TV station programmed Start a station search Picture settings incorrectly set Adjust the brightness contrast or colour setting Interference from other devices Change the position of the device Channel setting Automatic or manual channel set ting fine tuning Antenna Have antenna cable or system checked Colour intensity at maximum Turn up the colour TV standard setting if setting op Select the correct colour standard tion is available Problem at station Test with an another channel Problem at station Test with a different station Volume set to minimum Turn up or switch on the volume Problem at station Test with an another channel Television station has no tele Test another channel for fine tun text or antenna system ing and ghosts Station signal too weak Check the antenna system No optical connection Point the remote control at the television set Remote control batteries Check the batteries change i necessary Operating condition undefined Switch off the television with the main power button for approxi mately 2 minutes Incorrect setting for picture reso Change the setting on the PC for lution and picture frequency on example picture reso
78. enu TV Listing option is marked Select the line Search with W or A and press OK to confirm A keyboard is displayed Select the required character of the search criterion with W A or gt and move to the next character with OK Using the push button Clear you can delete the complete search criterion using the push button Back you can delete the search criterion step by step Select the push button Search For with A and press OK to confirm Found results are listed on the right side of the screen By pressing gt once the results can be accessed and you can select the results with V or A and display the subcategories with OK Note m To search for specific subjects press to select the option On Demand and press OK to confirm Select the desired subject from the list with W or A and confirm with OK To exit electronic programme guide press EXIT TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 format if this format is detected via the Euro AV socket 1 Open the Tools menu with TOOLS 2 Select the line Picture Format with W or A 3 Select the picture format with or gt and press OK to confirm 4 Press EXIT to end the settings Note m You can choose between the following pic ture formats
79. es as a DMS Digital Media Server is required in order to use home network GENERAL INFORMATION Receiving digital stations m To receive digital satellite stations DVB S you need a satellite antenna m To receive digital stations DVB T you need a digital rooftop or indoor antenna passive or active indoor antenna with its own power sup ply m The antenna cable of the cable TV network that broadcast in DVB C must be plugged into TV in order to receive the DVB C broadcasts m Unlike analogue broadcasting not every sta tion has its own transmission frequency In stead several stations are grouped into what are known as bouquets on a regional or na tional level m You can find the current transmission informa tion on teletext from various broadcasters or look in a TV guide or on the Internet Various digital television stations from private broadcasters are encrypted DVB S DVB T and DVB C Watching these stations and the recording and playback functions are only possible with the appropriate Cl module and a SmartCard Ask your specialist dealer GRUNDIG SCR System m Your TV supports SCR system Single Chan nel Router With SCR satellite system several users can individually receive all signals from the satellite simultaneously Important notes on environmen tal protection Those items mentioned below will help you re duce the consumption of natural resources as well as save your money by reducing
80. far as possible from cellular phones microwave ovens and similar devices operating with high frequency waves Otherwise your televi sion may malfunction because of such radio waves m To prevent the spread of fire keep candles or other open flames away from this product at all times m Do not expose the batteries to excessive heat such as direct sunlight fire etc Do not use old and unused batteries together m Only replace the exhausted batteries with those having the same model value and prop erties m By ensuring proper disposal of these batteries you will have contributed in prevention of po tential hazards on the environment and human health that may arise from inappropriate dis posal of the batteries m Warning About the Device Package The package of the product can be recycled Please ensure that the packaging is disposed separately conforming with the local regula tions to make sure that the product packaging is recycled environmentally Caution m f you want to use a wall bracket for your television make sure you read the assembly instructions for the wall bracket carefully or have your specialist dealer mount it for you When buying the wall bracket make sure that all the fastening points needed on the television are there on the wall bracket and that they are all used when it is mounted m If wall hanger is not going to be used use your television only with the stand supplied in the
81. gital television chan nels DVB C 26 Select the option Cable with or gt and press OK to confirm 27 Select the line Scan Type with w or A lt Select the option Quick or Full with or gt Quick scanning function sets the chan nels according to the cable operator information in the broadcasting signal Full scan function scans the entire fre quency range selected With this search option search can take a long time This search type is recommended Some cable providers do not support Quick scan Note m You can speed up the search To do this frequency and network ID information are required You may get this data from your cable operator or find it in the Internet fo rums 28 Use w to select the push button Next Page and confirm with OK Note m Perform Channel Type selection Press or gt to select whether you want to search for only digital channels Digital only Ana log channels Analog or both Digital Analog and press OK to select and mark or unmark the Digital and Analog items 29 Press e red to start searching The Automatic Channel Search menu appears and the search for TV channels begins The scan is complete as soon as the Search is completed appears 30 Select the Channel Editor with e red 18 ENGLISH Tuning terrestrial digital television channels DVB
82. h Ii lt U A Q N ENGLISH 57 CONVENIENCE FUNCTIONS TV Settings 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item TV Settings with gt or and press OK to confirm TV Settings menu is displayed g TV Settings Language amp Keyboard Accessibility Settings Accessories Advanced Settings About ExT Exit 4 Change Area Back Note Additional operations are explained in the following sections Language amp Keyboard settings Changing the menu language 1 Select the line Language amp Keyboard with W or A and press OK to confirm 2 Select the line Menu Language with w or A and press OK to confirm 3 Select menu language with w A or gt and press OK to confirm 4 Press BACK m lt to go back one menu level or press EXIT to end the setting Changing the audio language only for digital television channels You can define a primary and a secondary audio language 1 Select the line Language amp Keyboards with VW or A and press OK to confirm 2 Select the line Audio Languagex with w or A and press OK to confirm 58 ENGLISH 3 Select the audio language with W A or gt and press e red to set it as the primary audio language or ee green to set it as the secondary audio la
83. he same channel in more than one favourites list Each favourite list can contain maximum 255 channels Notes m You can delete channels from the favourites list Press eee yellow select the favorites list the channel is in with W or A and press OK to confirm Select the channel s you want to delete with w A or gt and highlight the channel by pressing OK Press eee yellow and select the line Remove from Fav with w or A and confirm with OK The channel you have selected is now deleted from the favorites list Em When a channel stored in the favourite chan nel list is deleted channel order in the favou rite list is updated 5 Press EXIT to close the menu ENGLISH 83 SPECIAL SETTINGS Displaying signal information only for digital television channels 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Advanced with W or A and press OK lt to confirm 5 Select the line Signal Information with W or A and press OK to confirm Signal Information menu is displayed Notes Signal information changes depending on the current source E Signal information is shown on the left of the menu The more Frequency and S
84. here is enough space around the television set in the wall unit m The television set is designed for use in in doors If you do use it at outdoors please ensure that it is protected from humid environ ments such as rain or splashing water as these will create risk of safety m Never use the television set in humid environ ments Do not put objects containing liquid such as vase on the television set The liquid in it may spill and cause risk of safety m Place the television set on a solid level sur face Do not place objects such as newspapers on the television set or cloth or similar items be neath it Do not place the television set close to heating units or under direct sunlight as this will impair cooling m Higher ambient temperature will shorten the service life of the television set m Do not open the television set under any cir cumstances Safety risk may arise and also the guarantee of the product can be void if the television set is opened Make sure that the power cord or the AC DC adaptor if supplied is not damaged m Television set can only be operated with the power cable or the AC DC adapter supplied with the product 4 ENGLISH m If the mains plug of the television is grounded always make sure that it is connected to a grounded socket m Plug the device into the mains socket only after you have connected the external devices and the antenna Make sure that the mains
85. hese formats enable audio files to be saved on storage devices with a sound quality similar to that of a CD File extensions supported by your device mp3 mp2 wma m4a aac wav MP3 files can be organised into folders and sub folders similar to the files on a computer 50 ENGLISH Image data Your television can display picture data in JPEG PNG and BMP formats JPEG stands for Joint Picture Experts Group This process is intended to compress picture files PNG and BMP standards are intended to com press picture data without loss Picture files can be saved in a data storage me dium together with other file types Such files can be organized as folders and sub folders USB OPERATION Connecting external data media It is advised to put the television on stand by mode before connecting the external data me dium Connect the device and then switch the television on again Before disconnecting the data medium the tele vision must first be switched to standby other wise files can be damaged Notes m The socket USB1 at the side of the tele vision supports 500 mA current according to the USB standard Devices such as exter nal hard disk and etc that consume more power can only be connected to the USB2 HDD interface of the television m If you are using a power cable for the ex ternal hard disk that you have connected to the USB2 HDD USB interface then the power cab
86. i fi system Connecting digital multi channel amplifier AV receiver 1 Connect the HDMI4 ARC HDMI 1 4 Audio Return Channel socket to the relevant socket on the HDMI ARC compliant Digital multichannel amplifier AV receiver with a standard HDMI cable digital audio signal of 2 Connect the Optic Out socket on the television to the corresponding socket on the AV receiver using a standard optic digital cable digital audio signal Important m Do not use a HDMI cable longer than 5 m for HDMI ARC connection USING EXTERNAL DEVICES Apply the device with HDMI ARC function and activate HDMI ARC 1 Switch on the the multi channel amplifier or the AV receiver If a Blu ray Player is con nected on the AV receiver the player must be switched on too 2 Open the tools menu with TOOLS 3 Select the line Digilink with w or A and press OK to confirm Audio device connected to the HDMI4 ARC source in the Device List menu shall be displayed in the list 4 Start device search with eeee blue Audio device connected to the HDMI4 ARC source shall be displayed in the list 5 Select the device with w or A and press OK to confirm Note m If the audio system also has a playing func tion e g Home theater system including DVD player function two devices will be listed on the HDMI CEC list The first one is the player and the second one is the audio playba
87. igital Media Server software in use Subtitles are not supported on video files that are played through the DMS device m Video files played through DMS device sup port following formats that have obtained DLNA certificate MPEG_PS_NTSC MPEG_PS_PAL MPEG_TS_SD_EU and MPEG_TS_EU_ISOx m n videos with high bit rate lag problem might be seen m Folders that appear as unknown in DLNA application cannot be played by the TV Installing the codec to your computer can solve this problem MULTIMEDIA SERVER MODE m Audio files played through DMS device sup Playback por Kelowna tormas ihar Nave Sbidinga 1 Select the content folder on DMS device DLNA certificate AAC_ADIS_320 with W A or gt and press LPCM MP3 WMABASE and OK WMAFULL All titles are displayed to confirm m Image files played through DMS device sup 2 port following formats that have obtained DLNA certificate JPEG_LRG JPEG_ MED and JPEG_SM 3 Press gt to start playback Select the desired title with W A or gt Other playback options 1 Press I to pause playback 2 To resume playback press gt 3 Press or gt until you reach the desired file 4 Press fil to stop playback 5 Switch back to the content with BACK lt x 6 To exit DLNA feature press EXIT 7 Confirm the warning screen with ee gree
88. ignal Strength bar stretches to the right the more signal you have m The signal level not only depends on your receiver system but also on the channel which is currently active Remember this when aligning your antenna using the signal level display 6 Press EXIT to close the menu 84 ENGLISH Deactivate and activate HbbTV This option allows turning off Hbb TV feature thus warnings shall not be displayed on chan nels with Hbb TV feature 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Advanced with W or A lt and press OK to confirm 5 Select the line Hbb TV with w or A 6 Select the option Off with or gt Note m To activate HbbTV again select in step 6 the option On 7 Press EXIT to end the setting Deactivate and activate digital teletext If you deactivate digital video text only normal video text can be selected however the other functions of the interactive service HbbTV are still available 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Advanced with W or
89. ile browser Page hold in teletext mode starts the reverse picture search in the file browser Show answers in teletext mode starts the forward picture search in the file browser Starts playback in the file browser Starts playback in the DLNA menu Pauses the file executed on the DLNA menu Selects the split screen function in teletext mode ends playback in the file browser Stops the file executed on the DLNA Menu Selects different audio language in digital TV operation Selects different subtitles in digital TV operation ENGLISH SETTINGS Initial set up The Television is fitted with an installation assis tant which guides you step by step through the basic settings Using the screen dialogue the user guide en ables supposedly complex settings and data entries to be presented simply and clearly for everybody Pages and dialogue items appear on the screen which identify the subsequent and likely operat ing steps To support this you will also see the required button symbols of the remote control The basic settings in detail language selection country selection choice of user mode network settings if desired Station settings DVB S DVB T DVB C and analogue channels The detailed settings can be found on pages 16 and 18 Settings for connecting to the home network Depending on the connection to the home net work you connect your television to the
90. ion Component 1 Connect the PC IN sockets on the televi sion and the corresponding sockets on the external device using cinch cables video signal 2 Connect the PC Audio IN sockets on the television to the corresponding sockets on the external device using cinch cables audio signal Using the Euro AV socket E Suitable devices Digital satellite receiver DVD player recorder set top box game con sole video recorder decoder m Video signal CVBS RGB m Audio signal stereo analog Channel position SCART 1 Connect the AV1 S VHS input on the television to the corresponding socket on the external device using EURO AV cable video and audio signal Selecting Scart volume adjustment 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Sound Settings with gt or and press OK to confirm Sound Settings menu is displayed 4 Select the line Advanced with W or A and press OK to confirm 5 Select the line Scart Output with W or A 6 Select the option Fixed or Adjustable with or gt Note Scart Volume becomes active when Ad justable is selected in the menu 7 Select the line Scart Volume with W or A and adjust the volume by using or gt 8 Press EXIT to end the setting ENGLISH 69 USING EXTERNAL DEVICES With
91. ireless WPS with or gt and press OK to confirm WiFi warning screen will be displayed 6 Activate WiFi with ee green 7 Select the line WPS Type with w or A and select the option Push Button with or gt Network Configuration Change Connection Type Wireless WPS On Push Button Select Access Point Network Configuration Advanced 9 Connect e E gt Change Area Back Ext Exit 8 With e red select Connect to establish modem connection Push the WPS button on your Access Point message is displayed 9 Press the WPS button on the router 36 ENGLISH 10 To continue after pressing the WPS button on the access point press ee green The Connection to Gateway Success message will be displayed 11 Press ee green to make sure that the network connection is established with the current settings Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 12 Press EXIT to end the setting Wireless WPS network connection with PIN 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Network Configura tion with gt or and press OK to confirm Network configuration menu is dis played 4 Sel
92. ireless network 2 Open the menu with MENU 3 Select the menu item Screen Share with gt or and press OK to confirm liveshare menu is displayed 4 Start Liveshare application from your laptop PC or mobile device and select your televi sion Liveshare will begin in a short while and the screen image of your laptop PC or mobile device will be reflected on the television 5 Press EXIT to end Liveshare 72 ENGLISH PC MONITOR MODE Connecting a PC 1 Connect the socket PC IN on the television to the corresponding socket on the PC using a VGA cable 2 Connect the Audio socket on the televi sion to the corresponding socket on the PC using a suitable cable Note m Adjust your PC to the monitor for example picture resolution 1280 x 768 picture fre quency 60 Hz Selecting the channel position for the PC 1 Press mf gt and use or gt to select input signal PC then confirm with OK Settings for the PC 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed A Source Setup Auto Adjust Auto Adjust Mode Position Size Phase ExT Exit gt Change Area Back Select the function and setting you want using V or A and set with
93. ireless networks 9 Select the network that you want to connect with W A or gt and press OK to confirm Wireless connection password screen is displayed Note m For device to discover the wireless modem on the network the network name should support ASCII characters ENGLISH 37 NETWORK SETUP 10 Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select x to delete the character entered and press OK to confirm 11 Confirm the password with ee green Connecting Please wait message will be displayed and if the connection is established Connection To Gateway Success messages will be displayed 12 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 13 Press EXIT to end the setting Note m If you do not have a dynamic network fol low the instructions in manual connection section 38 ENGLISH Manual connection Certain networks require Static IP address If your network requires a Static IP
94. l might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead Batteries including those which contain no heavy metal may not be disposed of with household waste Please dispose of used bat teries in an environmentally sound manner Find out about the legal regulations which apply in your area 1 Open the battery compartment by removing the lid 2 Insert the batteries 2 x 1 5 V micro for example RO3 or AAA Observe the polarity marked on the base of the battery compart meni 3 Close the battery compartment Note m If the television no longer reacts properly to remote control commands the batteries may be flat Be sure to remove the exhausted bat teries from the battery compartment m The manufacturer accepts no liability for damage resulting from used batteries ENGLISH 9 OVERVIEW Connections on the television set Optic Out PC Audio IN 10 ENGLISH Audio output sockets optical for PCM Dolby Digital signals It is for digital multichannel audio video amplifier or AV receiver con nections Headphone connection 3 5 mm jack External audio output with headphone RCA converter Audio signal input for PC Audio signal input YUV signal PC IN AV1 S VHS ANT IN SATELLITE HDMI4 ARC VGA socket video signal input for PC Video signal input YUV sign
95. l or press EXIT to end the setting Accessories Display the status of the connected accessory from this menu to perform various adjustments 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item TV Settings with gt or and press OK to confirm 4 Select the line Accessories with W or A and press OK to confirm 5 Select the needful line with w or A and press OK to confirm Select the needful function with or gt 6 Press BACK lt to go back one menu level or press EXIT to end the setting Notes m Accessories are sold individually They are not provided with your TV Please contact your dealer from where you have purchased your TV in order to obtain more information about purchasing m Die Anzeige des Status und die Einstellungen sind abh ngig vom verwendeten Zubeh r ENGLISH 59 CONVENIENCE FUNCTIONS Advanced settings 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item TV Settings with gt or and press OK to confirm 4 Select the line Advanced Settings with VW or A and press OK to confirm Note Additional operations are explained in the following sections Auto sleep This function will turn the television to stand by mode in 4 hours depending on your setup un less the tele
96. le of the external hard disk must also be unplugged when the TV is turned off m You must not disconnect the USB Device from the TV while a file on the USB Device is being read by the TV m A bi directional data transfer as defined for ITE Information Technology Equipment de vices in EN 55022 EN 55024 is not pos sible m USB transfer is not an operating mode in it self It is only an additional function 1 Connect the USB2 HDD USB interface on the television and the related data output on the external device external hard disk digital camera card reader or MP3 player with a USB cable Of plug the memory stick in one of the USB1 sockets at the side of the television Removing the external data media Before removing the external data medium log off the data medium 1 Open the menu with MENU 2 Select the menu item Media Player with gt or and press OK to confirm 3 Select the Option PVR with or gt and press OK to confirm 4 Select the Media Options with ee green 5 Select the line Disk Management with VW or A and press OK to confirm 6 Select the line Safely Remove Disk with V or A and press OK to confirm 7 Remove the data medium from the socket ENGLISH 51 USB OPERATION The file browser The file browser displays the video audio and picture data that the external data medium pro vides
97. lished Connection To Gateway Success Internet Connection Success messages will be displayed 21 To switch to Source Setup menu press yeeeex blue Note m Continue searching for TV channels with point 22 for DVB S reception point 27 for DVB C reception point 32 for DVB T reception Searching television channels with sat ellite signal DVB S 22 Select the option Satellite with or gt and press OK to confirm The satellite Astra 19 2 East is preset 23 Confirm the push button Next Page with OK Notes m Select the Channel Type Press or gt to select whether you want to search for only digital channels Digital or only radio channels Radio or both Digital Radio and press OK to select and mark or unmark the Digitalk and or Radio items E Select Scan Mode To select whether you want to search for only free digital television channels Free only scrambled digital television channels Scrambled or both Free Scrambled press or gt and press OK to select and mark or unmark the Free and or Scrambled items 24 Press e red to start searching Automatic Channel Search menu appears and the scan for TV channels begins The scan is complete as soon as the mes sage Search is completed appears 25 Select the Channel Editor with e red ENGLISH 17 SETTINGS Tuning cable di
98. lling up a sub page directly If the selected teletext page contains further pages the number of the current sub page as well as the total number of pages is displayed 1 Call up the sub page with 2 Press e red or ee green to select a sub page 3 Press to quit the function Reveal answer Certain teletext pages contain hidden answers or information which can be called up 1 Display information with gt gt 2 Conceal the information with gt gt Splitting the screen Split Screen With this function you can see the television channel on the left and the teletext page on the right 1 To activate the split screen function press M Television channel and teletext page ap pear side by side on the screen 2 To deactivate the split screen function press M INTERACTIVE PORTAL HBBTV What is HbbTV HbbTV provides next generation interactive tele text broadcast with its modern structure content and high definition HD image and videos To receive HbbTV broadcast your television must be connected to the Internet Das Erste Heute 03 03 Heute 14 00 14 10 Di 04 03 Heute 14 10 15 00 iaesschau E ia F i Das Erste Tagesschau Gestern Das Erste Das Erste Rote Rosen 1677 MEIN TV TIPPS TV START o Startleiste TV Radio Using HbbTV When you switch to a TV program that supports HbbTV an info message will app
99. lution 1280 the PC x 768 picture frequency 60Hz DMS device is not switched on Make sure that the DMS device is or not started on and operating Network connection settings are Check the network settings not made 87 INFORMATION Low image quality pixel DMS for example PC is con Bring your DMS closer to the in WLAN mode nected to the wireless network modem and away from the modem Warnings about the con Network Cable or wireless USB Check network cable or wireless nection problems on the network device may be discon USB network device display nected Modem do not have Internet Make sure that your modem has connection or has problems Internet connection Videos in video applica Internet connection speed is low Low Internet speed is a problem tions are lagging during that is related with the speed of playback in wireless con your subscription or a failure in nection the Internet infrastructure Contact with your service provided ISP Videos in video applica Internet connection speed is low Low Internet speed is a problem tions are lagging during that is related with the speed of playback in cable con your subscription or a failure in nection the Internet infrastructure Contact with your service provided ISP There are connection This may occur due to temporary Try connecting to the applications problems in Inter ctive ap problems in servers of these ap again plications plications Not
100. n Note m Also you can select following playing func tions from the menu select repeat functions select previous title 44 picture searche previous gt Ic starts pauses playing fl stops playing gt gt picture searche next P gt select next title ENGLISH 49 USB OPERATION File formats Your television can be operated via the USB input with the following file formats Video data Video compression decompression codec is intended for decreasing the storage area without sacrificing the picture quality Your HD Digital Receiver allows you to play compressed video data with DIVX XVID H 264 MPEG 4 AVC L4 1 Ref Frames 4 MPEG 4 MPEG 2 MPEG 1 MJPEG MOV standards File extensions that the device supports avi mkv mp4 ts mov mpg dat vob In addition to video data these files also contain audio data compressed and packaged by using MP3 AAC or Dolby Digital Audio data Your television can play audio data coded with MP3 AAC standards MP3 stands for MPEG 1 Volume Level 3 and is based on the MPEG 1 standard developed by MPEG Motion Picture Expert Group AAC indicates the Advanced Audio Coding and is developed by MPEG AAC provides higher audio quality with the same data rate bit rate WMA Windows Media Audio is a compres sion standard developed by Microsoft for audio data T
101. n connect up to 11 devices that support DIGILINK to this television 1 Open the Tools menu with TOOLS 2 Select the line Digilink with w or A and press OK to confirm Connected devices are searched and the ones that are found are displayed on the Device List menu 3 Select the device that you want to control with W or A and mark it with OK If the selected device is connected to a different source than the current one you will automatically switch to the source to which the device is connected USING EXTERNAL DEVICES Device Control Switching the device to standby You can determine how the remote control of This option switches the connected external de your television will control the external device vice to standby 1 Press mf gt and use or gt to select 1 Press f gt and use or gt to select either one from HDMI1 to HDMI4 and either one from HDMI1 to HDMI4 and press OK lt to confirm press OK to confirm 2 Open the menu with MENU 2 Open the menu with MENU 3 Activate the menu item Settings with 3 Activate the menu item Settings with OK OK 4 Select the menu item Source Setup with 4 Select the menu item Source Setup with gt or and press OK to confirm gt or and press OK to confirm Source Setup menu is displayed Source Setup menu is displayed
102. nel If the device receives two channel programmes e g a film with the original sound on sound channel B display Dual Il and the dubbed version on sound channel A display Dual l you can select the desired sound channel 1 Select the line Sound Type with w or A and adjust the setting with or gt Equalizer Equalizer offers a sound setting that you can cre ate Equaliser is active in the menu when Sound Mode is selected as User 1 Select the line Advanced from the Sound Settings menu with W or A and press OK to confirm 2 Select the line Equalizer with W or A and press OK to confirm Equalizer menu opens 3 Itis active in 120Hz frequency band Adjust the preferred value by using or gt 4 Select the next frequency band with w or A to repeat the adjustment procedure 5 To save adjustment press BACK lt ENGLISH 25 SETTINGS Automatic volume The television channels broadcast at different volumes The automatic volume limiting AVL function means the volume is kept the same when you switch between channels 1 Select the line Advanced from the Sound Settings menu with W or A and press OK to confirm 2 Select the line AVL with W or A and then select On with or gt Note m AVL item is active in the menu when Sound Modex is selected as User o
103. nguage Primary and secondary languages ap pear on the upper left corner of the menu 4 Press BACK lt to go back one menu level or press EXIT to end the setting Changing the subtitle language only for digital television channels You can disable subtitles select subtitle lan guage and assign a secondary subtitle lan guage 1 Select the line Language amp Keyboard with VW or A and press OK to confirm 2 Select the line Subtitle Language with V or A and press OK to confirm 3 Select the subtitle language with w A or gt and press e red to set it as the primary subtitle language or ee green to set it as the secondary subtitle language Primary and secondary languages ap pear on the upper left corner of the menu 4 Press BACK m lt to go back one menu level or press EXIT to end the setting Changing the keyboard language You can select the language of the keyboard connected to television 1 Select the line Language amp Keyboard with V or A and press OK to confirm 2 Select the line Keyboard Languages with VW or A and press OK to confirm 3 Select the keyboard language with w A or gt and press OK to con firm 4 Press BACK m lt to go back one menu level or press EXIT to end the setting CONVENIENCE FUNCTIONS Accessibility settings 1 Open menu with MENU
104. nnect the WiFi USB Dongle 2 on socket USB1 or USB2 HDD 13 Press w the line Change Connection Typex is selected and press OK to con firm 14 Select the option Wireless with or gt and press OK lt to confirm 15 Confirm the message Do you want to turn on Wi Fi with ee green 16 Select the line Select Access Point with W or A and press OK to confirm Select Access Point menu appears and available wireless networks are scanned and displayed in the menu 17 Select the network that you want to connect with W Ad or gt and press OK to confirm Wireless connection password screen is displayed 18 Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select x to delete the character entered and press OK to confirm 19 Confirm the password with ee green Connecting Please wait message will be displayed and if the connection is established Connection To Gateway Success messages will be displayed 20 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is estab
105. ork settings Wireless and Wireless WPS WiFi Protected Setup 1 Connect Grundig WiFi USB dongle 2 to the USB1 or USB2 HDD socket of your television in order to connect the television to a wireless network Note Grundig WiFi USB dongle is not supplied with the product but sold separately Please contact your dealer from where you have purchased your TV Notes m Wireless LAN adapter supports IEEE 802 11B G and N communication pro tocols We recommend you to use IEEE 802 11N protocol to obtain the best perfor mance in wireless HD video playback m f you use a modem that supports IEEE 802 11B G video playback performance may be poor when compared to a modem that supports IEEE 802 11N since the data transfer rate of IEEE 802 11B G protocol is lower m Please note that video playback perfor mance in a DLNA application on a wireless local network and in a SMART Inter ctive TV 3 0 application on a network with inter net connection depends on the number of users on the network as it is the case in every wireless network E It is recommended to switch off the equip ment that are not in use in home network in order to avoid unnecessary network traffic m Placing the modem or wireless network shar er on an elevated location will increase the wireless connection reception strength m Wireless connection reception strength may vary depending on the type of the modem and the distance betw
106. ou have two options for this search the basic installation which presets a stan dard selection e g the satellite Astra 19 2 East you need only start the search the professional installation which allows you to make all required settings and set pa rameters for your receiver system DVB C For setting up digital cable channels see page 18 DVB T For setting up digital terrestrial channels see page 18 See Special Settings section on page 81 for searching analog television channels Note E See Special Settings section starting from page 75 for more information on digital tele vision channel settings SETTINGS Initial set up overview Select language page 16 step 3 Select country page 16 step 5 Select mode page 16 step 6 Network setup page 16 step 8 page 16 step 8 page 17 step 13 chapter page 36 Setting TV channels page 17 step 22 DVB T DVB C DVB S page 18 step 31 page 18 step 26 page 17 step 22 Auto page 18 step 31 Channel Editor page 19 ENGLISH 15 SETTINGS Arrange Initial set up 2 Switch the television to standby with the power switch ON OFF Switch on the television set from standby with Y 1 0 P or P Basic Setup menu appears when the dvice is switched on for the first time Hallo my name is Grundig F A A k Please select your desired menu language Inter ctive TV In which
107. pictures fragments etc Log on to the RoviGuide If you use the Electronic TV guide for the first time you must log on 1 Press GUIDE to start Electronic TV guide Terms and Conditions is displayed 2 With w display Terms and Conditions select the push button l Agree and press OK to confirm 3 Enter the postal code with 1 0 4 Confirm the log on with OK The Electronic TV guide in Offline mode In the offline mode the electronic programme guide offers an overview of all programmes that will be broadcast in the next week for digital stations only 1 Press gt GUIDE to start Electronic TV guide A message is displayed 2 Select the push button Continue with w and press OK to confirm Notes m Not all channels provide a detailed TV guide m Many broadcasters supply the daily pro gramme but no detailed descriptions m There are broadcasters which do not pro vide any information at all 3 Select the television channel with w or Ax Information about the actuel programme is displayed in the selected television chan nel ENGLISH 29 TELEVISION OPERATION 4 Switch to the information about the current programme using OK Notes m To call up further information about the pro gramme press W or A repeatedly m To display a small image of the programme select the Watch button with gt and con firm with OK m
108. plug socket of the television is comfortably accessible m Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it m Thunderstorms are a danger to all electrical devices Even if the television is switched off it can be damaged by a lightning strike to the mains or the antenna cable Always discon nect the mains and antenna plugs during a storm m Clean the television screen and cabinet with a soft and dry or slightly damp cloth Do not use wet cloth or detergent glass cleaners co logne and all cleaning agents alike Only use plain water to dampen the cloth m When deciding where to install the television set do not forget that most furniture surfaces are coated with various types of lacquer or plastic which contain chemical additives These may cause corrosion to the feet of the television thus resulting in stains on the surface of the furniture m Screen of your LCD LED television conforms to the highest qaulity standards and has been controlled with regard to pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds specified by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty SET UP AND SAFETY N m Please use your television at a location as
109. press OK Television will switch to the antenna sys tem you have selected and channels will be displayed 3 To exit the Channel Editor menu press EXIT SETTINGS Sequencing channels in the Channel Editor You can sequence the channels in the Channel Editor according to different criteria such as TV radio or scrambled unscrambled 1 To sequence the channels according to dif ferent criteria in the Channel Editor menu press eee yellow 2 Select the sequencing criteria you want with VW or A and press OK to confirm Channels will be displayed in the Chan nel Editor menu by the criteria you have selected 3 To exit the Channel Editor menu press EXIT Creating a list of favourites You can select your favourite channels and save them in up to four lists FAV1 to FAVA Note m Favourite lists must be created separately for all sources satellite cable and air m Press FAV lt to select the favorite list 1 In the Channel Editor menu select the channel s you want to add in the favor ites list with W A or gt and highlight the television channel by pressing OK Channel is marked with 2 Press eee yellow Tools menu is displayed 3 Select the line Add to Fav with w or A and press OK lt to confirm Add to Fav menu is displayed 4 Select the favorite list you want to add th
110. r Standard Modex Restore default settings 1 Select the line Enhanced by pressing w or A and press e to confirm 2 Select the line Sound standard settings by pressing W or A and press e to confirm 3 Press ee green to confirm the security query or press e red to cancel the function 4 Press EXIT to end the setting Concluding the settings 1 Press EXIT to end the setting 26 ENGLISH TELEVISION OPERATION Basic functions Switching on and off 2 3 A Switch the television to standby with the power switch ON OFF Press 1 0 or P or P to switch on the television from standby mode Press to switch the television to standby Switch the television to standby with the power switch ON OFF Selecting channels 1 2 3 Use 1 0 to select channels directly Select television channels step by step with P or P Open the channel list by pressing OK select the channel list by pressing or gt and confirm with OK then close the channel list with EXIT Notes E Programme information for the following days an be called up with A m Switch to radio channels by calling up the channel list with OK press eeee blue use or gt to select the option Radiox Select radio channels with or gt and confirm with OK m Switch back
111. ration menu is dis played Select the line Select Access Point with W or A and press OK to confirm Select Access Point menu appears and available wireless networks are scanned and displayed in the menu Press e red Add Network menu appears Select the line Access Point Name with W or A and press OK lt to confirm A menu for entering the SSID will be displayed Note m For device to discover the wireless modem on the network the network name should support ASCII characters Select the required character with w A or gt and move to the next character with OK Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters Select x to delete the character entered and press OK to confirm Confirm the SSID by pressing ee green Select the line Security Type with W or A and select the required option WEP WPA or WPA2 with or gt 40 ENGLISH Note m If the WPA option is selected the security protocol AES or TKIP must be selected on the line Encryption This depends on the settings on the router 10 Confirm the setting with e red The network is now in the Select Access Point menu 11 Select the network with W A or gt and press OK to confirm Wireless connection password scre
112. rce as PC 1 2 Open Input Source menu with f gt kK Select the AV source you will rename with or gt and press eeee blue Rename menu is displayed Press OK and delete the old name step by step with e red Select the required character number with VW A or gt and move to the next character with OK Repeat the same process for all characters numbers Using Shift OK you can switch between uppercase letters numbers and lowercase letters special characters To save the new name with ee green Select the icon appropriate for the device type with or gt and press OK to confirm To save the setting press eeee blue Source name and icon will change Press EXIT to end the setting SETTINGS Picture settings 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Activate the menu item Picture Settings with OK Picture Settings menu is displayed a Picture Settings Picture Format Picture Mode Backlight Advanced Restore default display settings Change Area Back EXT Exit 4 Select the required line Picture Mode or Backlight with w or A and press OK to confirm Select the option with or gt and press BACK lt to return to Picture Settings menu Note m Other settings are available un
113. red analogue channels If channels were stored with the automatic chan nel search during the tuning of the television channels you can delete them You can also change or enter the name of a channel and skip a channel Selecting channel lists 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm 4 Select the line Channel Editor with w or A and press OK to confirm Channel Editor menu is displayed Note m Additional operations are explained in the following sections SPECIAL SETTINGS Deleting channels 5 In the Channel Editor menu select the channel s you want to delete with w A or gt and highlight the televi sion channel by pressing OK Channel is marked with W Note m f several TV channels are to be deleted press W A or gt to select these and mark each one with OK Activade the Tools menu with eee yel low Select the line Delete with W or A and press OK to confirm To confirm deletion process with ee green or to cancel deletion process with e red Press EXIT to close the menu Entering the analog channel names maximum 8 characters In the Channel Editor menu select the channel you want to rename with w A or gt
114. ring playback 2 Enter the time that you want to move to with 1 0 and confirm with ee green Searching forward only video and audio files You can select different speeds 2 fold 4 fold 8 fold 16 fold and 32 fold forwards and back wards 1 During playback you can select playback speed by pressing 44 or gt P 2 To resume playback press gt Turn the picture display only picture files The pictures can be rotated by 90 1 During playback switch on the control panel with OK 2 Use or gt to select lt gt and press OK The picture rotates 90 clockwise Repeat functions Options Onex the selected track is repeated once Sequencex selected tracks are repeated consecutively Random x selected tracks are repeated in a mixed order Nonex repetition off Press gt to start playback 2 During playback switch on the control panel with OK 3 Select C with or gt and press OK repeatedly The repeat function will change ENGLISH 55 TELETEXT MODE Note m f you only want to use this normal video text disable the digital video text see page 84 TOP text or FLOF text mode 1 Press TXT to switch to the Teletext mode 2 You can select teletext pages directly with 1 0 or step by step with W or A To return to page 100 press Note m At the bo
115. rity range 1 4 1 8 1 16 1 32 Digital DVB T2 VHF UHF Band width 7 MHz and 8 MHz FFT size 1k 2k 4k 8k 16k 32k Modulation 16QAM 64QAM 256QAM QPSK Security range 1 4 19 256 1 8 19 128 1 16 1 32 1 128 This feature is optional Not available in all mod els Analog CO2 C80 special channels SO1 S41 Default channels TV Radio 6000 Satellite DVBS 1000 Cable DVBC 99 analog 1000 Antenna DVBT 99 analog 8 AV 2 USB Weight approx 6 75 kg Size WH D 92 4cm 56 1 cm 7 3 cm Right to make technical changes and errors re served ENGLISH 85 INFORMATION Service information for dealers ropean Union directives and regulations below 2006 95 EC Electrical equipment directive for use within certain voltage limits 2004 108 EC Directive relevant for electro magnetic suitability 2009 125 EC Directive and relevant for eco design for products using energy as well as its following sub directives 278 2009 Regulation regarding eco friendly design requirements regarding energy consump tion of uncharged external power sources and average active efficiency for models with AC DC adapters 642 2009 Regulation regarding eco friendly design requirements for televisions 2010 30 EU Directive regarding Energy La belling of Energy Related products as well as its following sub directives 1062 2010 Regulation regarding energy la belling of televisions 2011
116. rol for CA module and smart cards 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed 4 Select the line Advanced with W or A lt and press OK to confirm 5 Select the line CA Module with Ww or A and press OK to confirm Notes m This menu provides operating instructions and after you enter your PIN code ac cess to channels of the PAY TV provider m The remaining settings are described in the manuals for your CA module and smart card m The CA modul is not supported in some countries and regions Please consult your authorised dealer 6 Press EXIT to end the setting SPECIAL SETTINGS Searching for all digital televi sion channels from a satellite automatically New satellite channels are added or satellite data is changed frequently Therefore we rec ommend you to run auto search function from time fo time All transponders are scanned for new channels 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm Source Setup menu is displayed Source Setup Automatic Channel Search Manual Channel Search Channel Editor Advanced Settings C Back ExT Exit 4 Change Area
117. scan type with or gt Quick scanning function sets the chan nels according to the cable operator information in the broadcasting signal Network ID performs the installation that is suitable to your network If you know the Network ID please enter it If you do not know the Network ID please select Auto for Frequency and Network ID If scanning cannot be performed with Quick option select Full All current channels are tuned and stored in Full scanning This scanning process can take a long time This option is recommended if your cable operator does not support quick scanning function SPECIAL SETTINGS Note Searching for television chan m You can speed up the search To do this nels from the cable provider frequency and network ID information are manually required You may get this data from your l cable operator or find it in the Internet fo Open the menu with MENU lt rums 2 Activate the menu item Settings with OK 7 Select the push button Next Page with V to and press OK to confirm 3 Select the menu item Source Setup with gt or and press OK to confirm Note 4 Select the line Manual Channel Search m Select whether to search for digital or ana with W or A and press OK to con logue TV channels To do this press or firm gt to select the option Digital or Ana logue and press
118. se VW or A to select the line Power LED Brightness 2 Use or gt to set the brightness to High Medium or Low 3 Press BACK lt to go back one menu level or press EXIT to end the setting Power save mode It ensures automatic shut off of screen in An tenna Cable Satellite and radio channels and USB mode when playing audio files 1 From the Advanced Settings menu use V or A to select the line Power Sav ing Modex 2 Press or gt to set shut off time of dis play as 10 Seconds 30 Seconds 60 Seconds 3 Press BACK lt to go back one menu level or press EXIT to end the setting Note m If the screen closes while listening to music in USB mode press MENU and select Off with or gt to close the feature CONVENIENCE FUNCTIONS Functions in the About menu 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item TV Settings with gt or and press OK to confirm 4 Select the line About with Ww or A and press OK to confirm Note Additional operations are explained in the following sections Product information 1 From the About menu use W or A to select the line Product Information and press OK to confirm Software version information of the pro duct is displayed 2 Press BACK lt
119. sion to the home network continue at point 8 for an automatic LAN connection or continue at point 13 for an automatic WLAN connection Note m f connecting to a home network is not nec essary skip the setting using eeee blue Continue settings at point 22 26 or 31 Connecting to a home network with a LAN cable 8 Press w the line Change Connection Typex is selected and press OK to con firm 9 Select the option Wired with or gt and press OK to confirm Note m The settings for a manual LAN connection are on page 34 10 Press e red to select Connect option to establish modem connection Connecting Please wait message will be displayed and if the connection is established Connection To Gateway Success messages will be displayed 11 Press ee green to check the performed settings and also if the local network and internet connection has been established Testing Please wait message will be displayed and if the connection is established Connection To Gateway Success Internet Connection Success messages will be displayed 12 To switch to Source Setup menu press yeeeex blue SETTINGS Note m Continue searching for TV channels with point 22 for DVB S reception point 26 for DVB C reception point 31 for DVB T reception Connecting automatically by entering the network password Note m Have you co
120. st adjustment This setting is mostly too strong for use with normal pic tures and should only be used where neces sary low or off otherwise nuances in the image can be suppressed E Gammax This setting establishes which brightness value should be displayed for which digital transmission value Most re cordings are transmitted with a gamma value of 2 2 all Windows PCs and newer PCs with a MAC operating system work with this older MAC systems and transmissions without colour profile mostly operate with a gamma value of 1 8 Dynamic Contrast The function dynami cally and optimally adjusts the contrast for the respective picture content by analysing images and then altering this depending in a change in contrast This increase the con tract however may also reduce the visible brightness levels in the picture ENGLISH 23 SETTINGS E Perfect Clear Improves the general im Restore default settings age by means of a gentle blue hue giving 4 the appearance of greater sharpness and improves the black level by setting this entire ly to black from specific shade of back This reduces the visible grey values in the dark 2 Press ee green to confirm the security In the menu Picture Setting select the item Restore default display settings with w or A and press OK to confirm areas of the picture query m Film mode detects and processes feature or films automatically for all chann
121. t Note m Picture setting Game can only be selected in DMI Component or PC modes 4 Press EXIT to end the settings ENGLISH 27 TELEVISION OPERATION Audio settings 1 Open the Tools menu with TOOLS 2 Select the line Sound Presetting with w or A 3 Select the audio setting by pressing or gt You can change the User audio setting see Equalizer on page 25 4 Press EXIT to end the settings Audio language You can select various languages when watch ing digital channels This depends on the pro gramme being broadcast 1 Press 62 to open the selection menu 2 Select the language with w or A and press OK to confirm 3 Press EXIT to end the settings Subtitles You can select various subtitles when watch ing digital channels This depends on the pro gramme being broadcast 1 Press to open the selection menu 2 Select the language with w or A and press OK to confirm 3 Press EXIT to end the settings 28 ENGLISH Zoom function With this function you can enlarge the picture on the television 1 Open the Tools menu with TOOLS 2 Select the line Zoom with W or A 3 Select zoom setting with or gt and confirm with OK Image is enlarged as center focused 4 To navigate in the enlarged picture press e red and move the screen with
122. t after update Do not turn your television s power off during up dates Software update USB 1 Plug the memory stick in one of the USB sockets at the side of the television 2 From the About menu use W or A to select the line Software Updates and press OK to confirm 3 Select the option USB with or gt and press OK to confirm The software on the USB memory stick is installed ENGLISH 61 CONVENIENCE FUNCTIONS Resetting the television to its original state This function enables you to delete the station lists and all custom settings 1 From the About menu use W or A to select the line Restore Factory Defaults and press OK to confirm Warning screen will be displayed Note m If the loaded applications are also to be de leted select the line Installed applications by pressing A and remove the small tick with OK 2 Press ee green to confirm the reset func tion Ina short while Installation Guides is displayed 3 Continue the settings as described in the chapter on first installation and searching for channels on page 16 Deleting channel history This function allows you to delete channel history stored in the Main menu 1 From the About menu use W or A to select the line Delete Channel History and press OK to confirm 2 Press ee green to confirm the reset func tion The pre
123. t dis played in the channel list number of chan nels displayed in the Channel list may be less than 6000 dd mm yyyy hh mm z TV N24 DTV Satellite 3 SAT TV 18 19 20 E Antenna Type E Tools E Tune Channel ENGLISH 19 SETTINGS Searching channels by name in the Channel Editor While arranging the channels in the Channel Editor you can search and select the channel name by the first three characters 1 In the Channel Editor menu select the search mode by pressing e red 2 Select the first character of the channel name you want to search with w A or gt and press OK to confirm Repeat the entry for the next characters Channels found will be listed on the right side of the screen 3 With gt switch to result section select the channel you are searching with Ww or A and highlight this with OK Note m To change the place of delete or add the channels to favorites lists continue reading the relevant section 4 To return to the previous menu press BACK lt mx 5 To exit the Channel Editor menu press EXIT Deleting channels in the Channel Editor 1 In the Channel Editor menu select the channel s you want to delete with w A or gt and highlight the televi sion channel by pressing OK Channel is marked with W 2 Press eee yellow Tools menu is displayed 3 Selec
124. t the line Delete with W or A and press OK to confirm 4 To confirm deletion process press ee green or to cancel deletion process press e red button 5 To exit the Channel Editor menu press EXIT 20 ENGLISH Moving the channels in the chan nel organizer to different channel positions 1 In the Channel Editor menu select the channel s you want to move with w A or gt and highlight the televi sion channel by pressing OK Channel is marked with W 2 Press eee yellow Tools menu is displayed 3 Select the line Move with VW or A and press OK to confirm Notes m In case of changing the order of the chan nels channel numbers sent by the broad caster will be changed m f more than one channel is selected for mov ing channels will be moved one after the other according to the selection order of channels 4 Select the new place of the channel with VW A or gt and press OK to confirm 5 To exit the Channel Editor menu press EXIT Displaying channels in the Channel Editor by antenna type If you have more than one antenna type you can display channels in the Channel Editor by antenna type 1 To display the channels in the Channel Editor menu by antenna type press ee green 2 Select Air Cable or Satellite with or gt and
125. teed that it will run in full compatibil ity with software without a DMS certificate m Perform the following steps for a sample DMS setup Open Windows Media Playerl on a PC with Windows operating system installed In Library tab select Media Sharingg tick on the Share my mediax box on the window that appears and then select OK The new window displays the IP numbers of connect ed devices To enable the TV to detect the computer you need to select the television s IP number If IP is not listed in the window from Media Sharing menu s Settings op tion you can select the option Allow new devices and computers automatically in the pop up menu After completing these pro cesses the television can only view the sup ported file formats in the Library In order not to encounter any problems with media sharing check the Firewall settings of your modem and computer 48 ENGLISH and press OK to confirm Media Player menu is displayed Note m If no DMS device appears check the net work connection See page 32 or 35 Select any DMS device with or gt and press OK to confirm DMS device content is displayed ES Media Player ay Device Selection F Type All amp Up Folder F Music F Videos F Pictures Playback E Media Options J Add to Play List Back Notes m File and folder structure of the DMS device in menu may vary depending on the D
126. to confirm 4 Select the line Channel Editor with w or A lt and press OK to confirm 5 Select the channel to be blocked with w A or gt and highlight with OK Channel is marked with W 6 Activade the Tools menu with eee yel low 7 Select the line Channel Lock with w or A lt and press OK lt to confirm 8 Enter the PIN code 1234 with 1 0 in the password prompt 9 Confirm the entry with OK Channel is marked with amp Note m To remove the lock select the channel again with W A or gt activade the Tools menu with eee yellow select the line Unlock Channel with W or A and press OK to confirm 10 Press EXIT to end the setting Watching a blocked television chan nel You can watch a TV channel blocked with PIN code by selecting the TV channel and entering the PIN code 1 Select the blocked channel with 1 0 or P P 2 Enter the PIN code 1234 with 1 O0 in the password prompt Blocked channel can be viewed Note Channel will be blocked again when you change the channel ENGLISH 65 USING EXTERNAL DEVICES DIGI LINK Your television is equipped with DIGI LINK feature This feature utilizes CEC Consumer Elec tronics Control protocol CEC allows you to make an HDMI connection between your TV and DVD player STB or video recorder
127. try is complete use W A Press W for the next line and press OK or gt to select BACK lt option and to display the keyboard press OK to confirm To pass to next screen press eeee blue Virtual keyboard will disappear to display keyboard press OK E Press eeee blue to delete last character number Press eee yellow to delete alll characters 6 Enter location Enter the data use W A and gt to select BACK lt and press OK to confirm To pass to the next screen press yeeeex blue and press OK to display the keyboard 42 ENGLISH Enter telephone number optional Enter the data use V A and gt to select 4 and press OK to confirm To complete registration process press yeeee blue Press OK to read and accept conditions of use Inter ctive Applications menu will be displayed and standard applications will be downloaded and installed to your TV SMART INTER CTIVE TV 3 0 FEATURE Logging in with Grundig Appli cation Store account If you reset your television to factory settings for any reason with Save installed applications unselected all applications you have down loaded will be deleted and when you access Inter ctive Applications menu the registration screen will be displayed again You can log in again with the e mail and pass word you have provided during
128. ttom of the screen you will see an information line consisting of a red green and depending on the channel yellow and blue text field Your remote control has but tons with the corresponding colours 3 Press e red to scroll one page back 4 Press ee green to scroll one page for ward 5 Press eee yellow to select section 6 Press eeeex blue to select topic 7 Press TXT to exit the Teletext mode Normal text mode 1 Press TXT to switch to the Teletext mode 2 You can select teletext pages directly with 1 0 To return to page 100 press 3 Press P to scroll one page back Press P to scroll one page forward 5 Press TXT to exit the Teletext mode Additional functions Skipping the waiting time While a page is being searched for you can switch to the television channel 1 Enter the teletext page number with 1 0 and then press P As soon as the page is found the page number is displayed 2 Press gt to switch to the teletext page 56 ENGLISH Increasing character size If you have difficulty reading the text on the screen you can double the character size 1 To enlarge the character size of a teletext page press 4 repeatedly Page stop A multiple page may contain several sub pages which are automatically scrolled by the transmit ting station 1 Stop the sub pages with 44 2 Press 44 to quit the function Ca
129. u item Source Setup with gt or and press OK to confirm Select the line Advanced Settings with VW or A and press OK to confirm Select the line Active Antenna Power with W OF A Switch on the antenna power supply for the antenna with or gt On Important m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna Select the line Automatic Channel Search with A or W and press OK to con firm Select the option Air with or gt and press OK to confirm Select whether to search for digital or ana logue TV channels To to this press or gt to select the option Digital or Analogue and confirm with OK Press e red to start searching Notes m When updating via the same satellites a security query is displayed at the start of a search m f the previously stored channels should be retained in the channel list and the new channels found be added to it then press ee green E f e red is pressed the saved channels will 30 be deleted from the current channel list The Digital Searching menu appears and the scan for TV channels begins The se
130. view images in the main menu are deleted 62 ENGLISH Timer settings 1 Open menu with MENU button 2 Activate the menu item Settings with OK 3 Select the menu item Timer Apps with gt or and press OK to confirm Timer Applications menu is displayed fal Timer Applications Sleep Timer Auto On Auto Off Advanced f Change Area Back m Exit Note m Additional operations are explained in the following sections Sleep timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Sleep Timer with w or A lt 2 Select the switch off time with or gt Note m To switch off the function use or gt to set the switch off time to Off 3 Press BACK lt to go back one menu level or press EXIT to end the setting On timer In the On Timer menu you can enter a switch on time for the television The television switches on with the preset vol ume and the desired channel after the set time in stand by mode has elapsed 1 Select the line Auto On with W or A and press OK to confirm CONVENIENCE FUNCTIONS 2 Select the line Mode with W or A and use or gt to select when the televi sion should switch on 3 Select the line Input Source with w or A
131. vision receives any signal or keys or according to European regulations the remote remains untouched for 5 minutes 1 From the Advanced Settings menu use W or A to select the line Auto Sleep 2 Select the switch off time with or gt Note m Set the function to Off with or gt to switch off 3 Press BACK lt to go back one menu level or press EXIT to end the setting Fast switching Using this function the time is take to switch be tween channels is changed Setting Yes 1 to 2 seconds setting Nox 2 to 5 seconds 1 From the Advanced Settings menu use W or A to select the line Fast Zap ping 2 Activade the function with or gt Yes 3 Press BACK lt to go back one menu level or press EXIT to end the setting 60 ENGLISH Store logo view This function is intended for feature introduction at stores When On is selected feature logos are displayed 1 From the Advanced Settings menu use VW or A lt to select the line Shop Logo Display 2 Select Yes with or gt Note Em Set the function to No with or gt to switch off 3 Press BACK lt to go back one menu level or press EXIT to end the setting Power LED brightness You can adjust power stand by LED brightness in operation mode of television 1 From the Advanced Settings menu u
132. ws the antenna to move within the determined limits With specify a limit position in West direction and with gt specify a limit position in East direction Go To Stored Position Moves the antenna to the preset satellite position Maximum 50 positions can be saved Select the setting with ee green button select predefined position with or gt and confirm with ee green button Antenna will mode to saved position Store Current Position Stores antenna s current position Select setting with e red button select recording position with or gt and confirm with ee green button Reset DiSEqC 1 2 Limit Resets the limit positions set for the antenna 3 Press EXIT to end the setting 78 ENGLISH Searching for television chan nels from the cable provider automatically 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm 4 Select the line Automatic Channel Search with w or A and press OK to con firm 5 Select the option Cable with or gt and press OK to confirm Automatic Channel Search menu is displayed Source Setup Quick lt gt Frequency Network ID C Back 6 Select the line Scan Type with A or Ww and select the option Quick or Full
133. x blue The Antenna Settings menu is dis played 7 Select the line DiSEqC Mode with w or A and select DISEqC1 2 with or gt The line DiSEgC 1 2 SETTINGS is ac tive Note Additional operations are explained in the following sections m Settings regarding DiSEqC 1 2 are ex plained below Contact an expert or your dealer for DiSEqC 1 2 antenna systems ENGLISH 77 SPECIAL SETTINGS DiSEqC 1 2 Settings Adjust the satellite antenna position according to each satellite These settings can be stored and the antenna can be moved to a preset position 1 Select the line DiSEqC 1 2 SETTINGS with W or A and press OK to con firm DISEqC 1 2 SETTINGS menu is dis played 2 Use w or A to select necessary items l Moving Modex Set the Moving Mode with or gt to Discrete or Continu Ous Discrete Moves the antenna to west or east for the determined step size Continuous Moves the antenna to west or east continuously Step Size With or gt select the number of steps the antenna has to rotate Step Size is active when Moving Modes is selected as Discrete Move Motor Adjusts the antenna for the selected satellite Set the antenna to West with and to East with gt Limit Position Sets the limit position which the antenna will be able to move and allo
134. ystem auto search by several users receivers at the same time may cause problems DISEqC Modex Based on the number of current satellite system select the option Off DiSEqC 1 0 or DISEgC 1 1 with or gt Off For satellite systems with single antenna DiSEqC 1 0 switch allows for receiv ing from maximum four satellites at the same time From LNB selection use or gt to make the 1 4 2 4 3 4 or 4 4 selection for the satellite that corresponds to relevant DiSEqC posi tions DISEgC 1 1 switch allows for receiv ing from maximum sixteen satellites at the same time From LNB selection use or gt to make the selections between 1 16 and 16 16 for the satellite that corresponds to relevant DiSEqC positions 8 Press EXIT to end the setting Motor antenna setup DiSEqC 1 2 Your television supports DiSEqC 1 2 motorized satellite systems This feature allows to control the satellite through your television 1 Open the menu with MENU 2 Activate the menu item Settings with OK 3 Select the menu item Source Setup with gt or and press OK to confirm 4 Select the line Manual Channel Search with W or A and press OK to con firm 5 Select the option Satellite with or gt and press OK to confirm 6 Activate the option Antenna Settings with neeee

Download Pdf Manuals

Related Search

Related Contents

VIVRE ENSEMBLE - Psychologie Positive  sicurezza nei laboratori scolastici rischio chimico  English  ーC-229 ーC-229D ーC  Bedienungsanleitung Second Edition  SJ-WA35P  [Drucken] klicken. - Firmware Center  Manual de Instrucciones Contenido de la Caja  Manuel d`utilisation de TRISERCOM  CAB-2 Installation Manual  

Copyright © All rights reserved. Failed to retrieve file