Sencor SPT 228 BO
Contents
1. RANDOM is displayed repeating cancelled p gt GE RANDOM LA LA PROGRAM MODE CD MP3 USB SD Up to 20 CD 99 MP3 WMA tracks can be programmed for disc playback in any order 1 prm m Press the MODE button short time during stop mode LCD display will show 1 and flash Select a desired track by using the SKIP SKIP buttons Press the button to enter the track into setting LCD display changes P02 Repeat 2 4 ste up to 20 CD 99 MP3 WMA tracks the display will show FUL when the programmed tracks arrive 20 CD 99 MP3 WMA To complete programming and start playback short press PLAY PAUSE button program playback starts automatically To terminate programming short press STOP button twice to cancel the program mode 8 1 2 3 4 USB SD CARD OPERATION DON T have compact disc in CD compartment Set the FUNCTION selector to CD USB position Insert a USB SD Card to the USB jack or SD slot The operation of PLAY PAUSE STOP SKIP SKIP REPEAT and PROGRAM is the same as CD MP3 Press STOP button long time changing USB and SD mode Have compact disc in CD compartment T Io Set the FUNCTION selector to CD USB position Insert a USB SD Card to the USB jack or SD slot Press STOP button long time to change CD to USB and SD mode The operation of PLAY PAUSE STOP SKIP SKIP REPEAT and PROGRAM is2. be lit off DC POWER 1 Open the battery compartment cover 2 Insert 8 pieces UM 2 of C type batteries into the battery compartment Be sure to insert battery s polarity as shown in the diagram engraved on the battery compartment 3 Place the battery compartment cover Notes The battery circuit is disconnected automatically when the AC cord is inserted to the AC INPUT socket then operate by AC Remove all the batteries from battery compartment when the unit is no longer operated by battery Do not throw the exhausted batteries in the household refuse Hand over the old batteries to your dealer to public collecting points EN 6 COMPACT DISC OPERATION Getting start 1 Set the FUNCTION selector to CD USB position Open the CD lid using the CD OPEN button Put the CD printed side up into the compartment and close the CD cover 2 Focus search is performed and the first number of tracks will be displayed at the same time playing automatically SKIP MODE CD MP3 USB SD 1 During playback or pause mode if SKIP button is pressed one time it will go to the next track and display the track number and then continue the playback or pause If SKIP button is being pressed long time the current track will be fast forwarded 2 During the playback or pause mode if SKIP button is pressed one time it will go to the previous track and display the track number and then continue the playback or pa
3. the same as CD MP3 EN 9 AUX OPERATION 1 Connect the output cable of any device into AUX jack 3 5mm located the left side 2 Set the FUNCTION selector to AUX OFF position adjust the VOLUME control to the desired level reception and play from speaker RADIO OPERATION 1 Set the FUNCTION selector to RADIO position 2 Select the desired radio frequency band by using the BAND selector Turn the TUNING control to select the station frequency as desired 4 Adjust the VOLUME control to the desired volume level FM amp FM STEREO reception 1 Setthe BAND selector at the FM position programs are received in mono mode in particular when stereo signals are weak it is preferable to receive the program in mono 2 Setthe BAND selector at the FM ST position for receiving stereo programs the STEREO indicator lights up to show FM stereo program ANTENNAS FM Telescopic rod antenna extend the rod antenna to improve reception EN 10 SPECIFICATIONS Power supply AC 230V 50Hz SUPPLY DC 12V 8x 1 5 V type C or UM 2 batteries Power output 2 x 1 5 W RMS Power consumption 15 Watt Dimensions of unit 280 W x 249 H x 140 D mm Weight 1 70 kg FM Freq Range FM 88 108 MHz Max USB capacity 32 GB Max SD capacity 32 GB Antenna TELESCOPIC ROD ANTENNA CD section TOP LOADING CD MP3 PLAYER CD size 5 amp 3 COMPATIBLE Speaker size 3 INCH EN 11 INSTRUCT
4. IONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this product at your applicable collection point for the recycling of electrical amp electronic equipment waste Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health which could be caused as a result of improper liquidation of waste Please ask your local authorities or the nearest waste collection centre for further details The improper disposal of this type of waste may fall subject to national regulations for fines For business entities in the European Union If you wish to dispose of an electrical or electronic device request the necessary information from your seller or supplier Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller This product mee
5. SENCOR SPT 228 INSTRUCTION MANUAL NAVOD K OBSLUZE NAVOD NA OBSLUHU FELHASZNALOI KEZIKONYV INSTRUKCJA OBSLUGI EN Z Sk HU PL_ PORTABLE RADIO WITH A CD MP3 USB SD PLAYER PRENOSNE RADIO S CD MP3 USB SD PREHRAVACEM PRENOSNE RADIO S CD MP3 USB SD PREHRAVACOM HORDOZHATO RADIO CD MP3 USB SD LEJATSZOVAL PRZENOSNE RADIO Z ODTWARZACZEM CD MP3 USB SD IMPORTANT SAFEGUARDS WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE These marking are located on the bottom side or back of RSR Or FEEC IRIG AINT 2 i DO NOT OPEN i the unit the unit CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance The following label has been affixed to the unit listing the proper procedure for working with the laser beam CLASS 1 LASER PRODUCT THIS LABEL IS AT
6. TACHED TO THE PLACE AS ILLUSTRATED TO INFORM THAT THE APPARATUS CONTAINS A LASER COMPONENT CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM THE WARNING LABEL INFORMING OF RADIATION IS PLACED INSIDE THE UNIT AS SHOWN IN THE ILLUSTRATION TO WARN AGAINST FURTHER MEASURES ON THE UNIT THE EQUIPMENT CONTAINS A LASER RADIATING LASER RAYS EXCEEDING THE LIMIT OF LASER PRODUCT OF CLASS 1 EN 1 SAFETY INSTRUCTIONS 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the appliance is operated 2 RETAIN INSTRUCTIONS The safety and operating instruction should be retained for future reference 3 HEED WARNINGS warnings on the appliance and in the operating instructions should be adhered to 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed 5 WATER AND MOISTURE The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement 6 VENTILATION The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated on bed sofa rug or similar surface that may block the ventilation openings placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings T HEAT The appliance shoul
7. UT TOUCHING THE RECORDED SURFACE PRESS THE DISC GENTLY TO INSERT IT Do not touch the reflective recorded surface Do not stick anything to or write anything on the surface Do not bend compact discs Incorrect EN 3 3 STORAGE After removing a disc from the unit be sure to put it back in its case Do not expose discs to direct sunlight high temperatures from a heater etc high humidity or dust Cleaning discs Before loading a disc wipe off any dust Dirt or fingerprints with a soft cloth Discs should be cleaned by wiping radially from the center to the edge FROM THE CENTIER TO THE EDGE Correct Incorrect This unit has been designed to play 8cm or 12cm compact discs bearing the identification logo shown on the disc Never use thinner benzine record cleaner or antistatic spray on a compact disc BEFORE OPERATION NOTES ON SET Beware of condensation When water vapour comes into contact with the surface of cold material water drops are produced If condensation occurs correct operation may not be possible or the unit may not function correctly This is not a malfunction however and the unit should be dried To do this turn the POWER switch ON and leave the unit as it is for several hours Be especially careful in the following conditions 1 When the unit is brought from a cold place to a warm place and there is a large temperature difference 2 When heater starts operating 3 When the unit
8. d be situated away from heat sources such as radiators stoves or other appliances including amplifiers that produce heat 8 POWER SOURCE The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 9 GROUNDING Precautions should be taken to ensure that the grounding means of an appliance is not defeated 10 POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point at which they exit from the appliance 11 POWER LINES An out door antenna should be located away from power lines 12 NON USE PERIODS The power cord of the appliance should be unplugged from the outlet when the appliance is to be left un used for a long period of time 13 OBJECT and LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 14 DAMAGE REQUIRING SERVICE The appliance should be serviced by qualified service personnel when The power supply cord or plug has been damaged Objects have fallen into or liquid has been spilled into the appliance enclosure The appliance has been exposed to rain The appliance has been dropped or the enclosure damaged The appliance does not appear to operate normally or exhibits a marked chang
9. e in performance 15 SERVICING The user should not attempt to service the appliance beyond that described in the user s operating instructions All other servicing should be referred to qualified service personnel NOTES 1 Itis preferred to retain CD inside the unit even when it is not in use This prevents dust accumulation on optical lens 2 Dirty or scratched CD may cause skipping problem Clean or replace the CD 3 If an erroneous display or malfunction occurs disconnect the AC cord and remove all the batteries where applicable to turn off the display Then turn the power back on e naked flame sources such as lighted candles should be placed on the apparatus apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Disconnect the power sources by pulling the mains plug mains plug shall remain readily operable EN 2 BEFORE OPERATION NOTES CONCERNING COMPACT DISCS Since dirty damaged or warped discs may damage the unit care should be taken of the following items 1 a USABLE COMPACT DISCS Use compact disc only with the mark shown on the disc b CD compact disc only with digital audio signals USE 2 a NOTES ON HANDLING DISCS Removing the disc from its storage case and loading it PRESS THE CLAWS AT THE CENTER OF THE DISC CASE INSERT WITH THE LABLE FACING UP LIFT OUT WITHO
10. is brought from an air conditioned place to a place of high temperature with high humidity 4 When there is a large difference between the internal temperature of the unit and ambient temperature or in conditions where condensation occurs easily Protect your unit set from rain fire moisture sand dust chemicals amp excessive heat e g Near heating equipment or in car parked under the sun light EN 4 LOCATION CONTROLS OF UNIT FRONT VIEW VOLUME CONTROL POWER ON INDICATOR USB PORT SD MMC SLOT FM STEREO INDICATOR LCD DISPLAY TUNING CONTROL AUX IN JACK FUNCTION SELECTOR 10 MODE BUTTON 11 FOLDER BUTTON 12 PLAY PAUSE 13 STOP BUTTON 14 SKIP BUTTON 15 SKIP BUTTON 16 CD COVER OPEN BUTTON 17 BAND SELECTOR 18 ANTENNA 19 CD COVER 20 AC SOCKET BO DUM IS EN 5 POWER OPERATION AC POWER 1 Before connecting the AC power cord check that the operating voltage of your set is identical with voltage of your local power supplied 2 Connect one end of he AC power cord supplied to the AC socket located at the backside of your unit 3 Plug the other end into the wall outlet 4 After connect the power source press the FUNCTION SELECTOR to CD USB or RADIO start work and the power indicator will be lit on 5 If you do not want to use the unit press the FUNCTION SELECTOR to AUX OFF to stop and power indicator will
11. ts all the basic EU regulation requirements that relate to it Changes to the text design and technical specifications may occur without prior notice and we reserve the right to make these changes Copyright O 2013 Fast CR a s Revision 06 2013 EN 12
12. use If SKIP button is being pressed long time the current track will be fast rewound STOP MODE If STOP button is short pressed during playback or pause mode the unit will go to stop mode and display TOTAL NUMBER of tracks PLAYBACK PAUSE MODE CD MP3 USB SD 1 If PLAY PAUSE button is short pressed during stop mode the first track will be played and the PLAY gt icon will be displayed 2 If PLAY PAUSE button is pressed during playback mode the unit will go to pause mode and the PLAY gt icon and number of track will be flashing FOLDER MODE CD MP3 USB SD 1 If FOLDER buttons is short pressed during PLAYBACK PAUSE STOP mode it will go to the next folder and display the folder number 2 If FOLDER buttons is long pressed during PLAYBACK PAUSE STOP mode it will go to the next 10 tracks and display the track number REPEAT MODE REPEAT REPEAT ALL REPEAT OFF 1 Press the MODE button one time during playback or pause mode is displayed with flashing the current single track can be repeated 2 Press the MODE button two times during playback or pause mode REP FOLDER is displayed the current folder can be repeated EN 7 Press the MODE button three times during playback pause mode REP is displayed without flashing all tracks can be repeated mors uam Press the MODE button four times during playback or pause mode
Download Pdf Manuals
Related Search