Black Box JPM418A-R4 patch panel accessory
Contents
1. should include the following items If anything is missing or damaged contact Black Box at 724 746 5500 e 1 Fiber Rackmount Cabinet e 1 Kevlar clamp installed e 4 4 cup head screws e 4 2 cup head screws e 30 3 7 6 cm cable ties e 4 4 10 2 cm cable ties e 6 rectangular plastic cable holders e 3 pairs of black spool rings installed for JPM406A R5 or 2 pairs of black spool rings installed e 1 danger sticker for JPM418A R4 e 1 locking PLEXIGLAS door e 2 mounting brackets e 4 silver screws for mounting brackets e 1 set of keys e 4 washers for mounting brackets e 1 users manual e 1 identification label sticker 2 FIBER RACKMOUNT CABINET 10 l1 12 13 14 15 3 Installation Attach the two mounting brackets to the cabinet and secure them with the four silver screws and four washers Using the or 4 cup head screws mount the Fiber Rackmount Cabinet in a 19 or 23 rack Open the back door by pulling then releasing the locking buttons Route multi strand fiber cable not included through the rectangular openings on the cabinet s top bottom or through the rubber grommets on the side Use the Kevlar clamp to secure the multi strand fiber to the cabinet Loosen the Kevlar clamp s two screws and wrap the cable s Kevlar yarn around the clamp Tighten the screws to secure the multi strand fiber to the cabinet NOTE The Kevlar clamp c2. an be mounted on the cabinet s rear left or right Install the cabinet s PLEXIGLAS front door Pull out the tray see Figure 1 to install a fiber adapter and splice tray if needed Up to 12 fiber adapters can be installed in the JPM406A RS5 up to six can be installed in the JPM418A R4 Install the connectors on the multi strand fiber cable or make the splice as needed See Figure 2 fora typical cable installation Connect the fiber cable to the fiber adapters Use the included rectangular plastic cable holders cable ties and black spool rings to hold the cable in place inside the cabinet Slide the tray back into place inside the cabinet Close the cabinet s rear door Snap in the 1 2 5 cm rectangular cable holder in the front of the inside tray This helps organize the fiber patch cables used in the front of the cabinet Close the cabinet s front PLEXIGLAS door Push the buttons in then release to lock Attach the danger sticker to the cabinet s rear or top panel Attach the identification label sticker to the cabinet s rear door a Install the fiber pe adapters here Rectangular openings Splicetray Rectangular cable holders Kevlar clamp installed on the side rear corner Figure 1 Fiber Rackmount Cabinet with tray pulled out
3. ck Box Corporation 1000 Park Drive Lawrence PA 15055 1018 INFORMATION Web site www blackbox com E mail info blackbox com 1 Specifications Construction 16 gauge cold rolled steel Size JPM406A R5 5 25 H 3U x 17 W x 11 5 D 13 3 x 43 2 x 29 2 cm JPM418A R4 3 5 H 2U x 17 W x 11 D 8 9 x 43 2 x 27 9 cm Weight JPM406A R5 17 2 Ib 7 8 kg JPM418A R4 15 2 lb 6 9 kg 2 Overview The JPM406A R5 is 3U high fits in a 19 or 23 rack and supports 12 adapter panels Each adapter panel has up to 12 connectors for a maximum of 144 ports It provides termination for optical cables on the premises or in a central office The JPM418A R4 is only 2U high and supports six adapter panels it also fits in a 19 or 23 rack Each adapter panel has up to 12 connectors for a maximum of 72 ports The Fiber Rackmount Cabinets are constructed of 16 gauge cold rolled steel and they re compact and rugged enough for commercial applications Its powder coated finish is corrosion resistant The cabinet has a front door a rear door and outside and inside plant cable entry exit holes Up to 3 splice trays JPM440A not included can be mounted in the chassis One splice tray accepts four fusion for single mode fiber or four mechanical for multimode fiber splice modules Two cable entry holes at the right and left on the cabinet s rear and two patch cord exit holes in the front bottom make cable installation easy Your package
4. vh M N SAX M TT f TTi A TD Mf 0 im i j V Fiber optic connectors 7 Liv a TT OT ld a a Y NENN TT Splice tray JPM440A not included ni mM NW ae 0 Oe EE Ee Sa a Fiber optic cable Fiber adapter panel with 6 fiber optic connectors installed Figure 2 The JPM406A R5 with three fiber adapter panels visible up to nine more can be stacked beneath the visible ones for a total of 12 adapter panels The fiber cable is routed through the splice tray then terminated via the fiber optic connectors Ml TT N A TTi TRADEMARKS USED IN THIS MANUAL Black Box and the Double Diamond logo are registered trademarks of BB Technologies Inc Kevlar is a registered trademark of E I du Pont de Nemours and Company PLEXIGLAS is a registered trademark of Roehm GmbH amp CO Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners Copyright 2009 Black Box Corporation All rights reserved 1000 Park Drive Lawrence PA 15055 1018 724 746 5500 e Fax 724 746 0746 ACK BOX MT ET TT UDBK SERVICES FEBRUARY 2009 BL um JPM406A R5 JPM418A R4 Fiber Rackmount Cabinet CUSTOMER Order toll free in the U S Call 877 877 BBOX outside U S call 724 746 5500 SUPPORT FREE technical support 24 hours a day 7 days a week Call 724 746 5500 or fax 724 746 0746 Mailing address Bla
Download Pdf Manuals
Related Search