Cyber Acoustics PS-2350
Contents
1. LED should light up Repeat steps 2 5 as with the first time you connected with the speaker Playing Audio via aux in jack 1 Make sure the speaker is fully charged 2 Power on the device by pressing and holding the power button for about 3 seconds 3 Plug in a 3 5mm AUX cable into AUX jack 4 Connect another end of the AUX cable with your secondary audio source 5 Music will play from the speaker system when you start the playback on the secondary audio source When you want to play through AUX in please make sure the Bluetooth source was stopped playback or disconnected Trouble shooting Symptom solution Speaker System Will Not Power Make sure the speaker is charged up Speaker Does Not Produce Sound Verify the speaker is getting power Check above steps Verify that all cables are plugged into the correct jacks or that the Bluetooth is paired correctly Sound Is Distorted Adjust the sound source s master volume control by balancing the volume until it s centered Trouble shooting Bluetooth connections Can t connect for the first time 1 Turn off the speaker completely by pressing and holding the power button for about 3 seconds or until the LED turns off 2 Check your Bluetooth source device and be sure you have found the section that allows you to see nearby Bluetooth products If you see the PS 2350 on the list but cannot connect you may need to try and synch again To start fresh With your Bluetooth d2. any Bluetooth enabled device Now you can enter the room select music to play on most smartphones tablets or laptops and control your listening enjoyment from the comfort of your lap From your device you can easily control and change music tracks playlists adjust volume up or down or even listen to podcasts or many other audio applications available on your device Wireless mono speaker Cables Carry pouch Owner s Guide with connection diagram e Read Instructions Carefully All safety and operating instructions should be read before this device is operated Heat Keep speakers out of extreme heat and away from sources producing extreme heat such as space heaters radiators stoves and other devices emitting heat Water and Moisture Keep speakers out of the rain and humid conditions to avoid electric shock Keep speakers away from water such as sinks bathtubs swimming pools washing machines tubs of water etc in order to avoid electric shock Keep water from dripping on the device do not put objects containing water such as vases on top of the device and do not put the device near standing water Cleaning Use a dry cloth for cleaning Do not wipe any part of the system with cleaning solvents such as furniture wax bleach benzene or ammonia Speaker connection Please read the step by step instructions along with the diagrams provided PS 2350 Connected Jo S Charging e Tur
3. IMPORTANT SAFETY INSTRUCTIONS Read these instructions All the safety and operating instructions should be read before this product is operated Keep these instructions The safety and operating instructions should be retained for future reference Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to Follow all instructions All operating and use instructions should be followed Do not use this apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacture s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at the plugs convenience receptacles and at the point where they exit from the apparatus 11 Only use attachments accessories specified by the man
4. S 2350 Select it to pair connect with the speakers 4 When the device connects you will hear a short audible beep The LED will stop blinking and turn to a solid on state 5 Now you can go to your music applications press play and enjoy your music Turning off your source device will automatically disconnect your speakers If you plan on not using your speakers again for an hour or more we recommend you turn off your PS 2350 speakers to save battery life until you are ready to listen again Pairing with the speakers after the first time Once you ve successfully paired your speakers your device will automatically connect with it on successive returns to the room in which they are situated You will be able to immediately go the audio application of your choice select your audio tracks and begin enjoying almost at once Powering off the speakers by pressing and holding the power button for approximately 3 seconds will disconnect from your source device automatically Turn your speakers back on by pressing and holding the power button for 3 seconds While your device is still Bluetooth enabled the speaker will allow your device to reconnect within just a couple of seconds without any further effort Disconnecting and pairing with a new device Ensure the speaker is fully charged up Switch on the device by pressing and holding the power button for 3 seconds or until you hear an audible melody The device is now switched on and the blue
5. evice select forget this device to remove the PS 2350 from the list You may need to turn off the Bluetooth function on your device to fully clear your list 3 Turn the speakers back on by pressing and holding the power button for about 3 seconds And go into the pairing mode by repeat step 2 5 as with the first time you connected with the speaker 4 Return to your source device and re enable the Bluetooth function Look for the PS 2350 speakers to show back up on the list 5 Select these speakers on your screen and listen for the audible beep to confirm pairing Can t connect when returning 1 If for some reason the PS 2350 does not automatically connect back with your Bluetooth enabled device you may need to physically go into your device s Bluetooth settings and select PS 2350 to reconnect 2 If the above step does not work see steps 1 5 in the Can t connect for the first time section Audio is choppy has erratic static or keeps disconnecting 1 Be sure to check your room environment Today s Bluetooth technology has a designed limit of approximately 30 feet line of sight This generally means your best results will be limiting your Source device and speakers to the same room Extremely large rooms or rooms with a lot of wireless electronics routers etc may affect the quality of sound connection or connection consistency 2 Check for obstructions walls or other objects that might impede the Bl
6. exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance 17 0 This equipment is a Class II or double insulated electrical appliance It has been designed in such a way that it does not require a safety connection to electrical earth 18 Do not install this equipment in a confined or building in space such as a book case or similar unit and remain a well ventilation conditions at open site The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc 19 WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids such as vases shall not be placed on apparatus 20 WARNING The battery battery or batteries or battery pack shall not be exposed to excessive heat such as sunshine fire or the like 21 WARNING The mains plug is used as disconnect device the disconnect device shall remain readily operable 22 WARNING Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus OFA ps 0350 Cyber Acoustics WIRELESS MONO SPEAKER Your PS 2350 speaker contains Bluetooth technology allowing you to wirelessly play music from nearly
7. n off the speaker e Plug in the included USB charging cable for charging micro USB plug to speaker and standard USB plug to USB power source or fold down the built in wall prongs and plug the speaker into an available wall socket e LED will be red while the speaker is charging LED will be purple while the speaker is powered on and charging D 110V Wall outlet for charging 1 1 USB cable for charging eLp A E Pairing with the speakers for the first time Before you start please fully charge the PS 2350 speaker Ensure the Bluetooth capability of your source device is turned on and ready to discover new items If needed see your device s instructions to add or setup a Bluetooth device When you first turn on the PS 2350 speaker system the Bluetooth functionality is not engaged The below steps are the guidelines for you to connect with PS 2350 speaker To wirelessly connect with the Bluetooth function of your speakers 1 Make sure the speaker is fully charged up Switch on the device by pressing amp holding the power button for 3 seconds or until you hear an audible melody The device is now ready for the syncing process 2 Pressing and holding the Bluetooth button for 3 seconds to trigger Bluetooth pairing mode You ll hear another audible melody and the LED will now blink red and blue alternatively 3 With your audio source Smartphone tablet iPod etc find the Bluetooth device list and look for P
8. oved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help RF warning statement The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction
9. uetooth signal 3 Try moving the source device to closer to your speakers Still can t connect 1 Be sure to check your room environment Today s Bluetooth technology has a designed limit of approximately 30 feet line of sight This generally means your best results will be limiting your Source device and speakers to the same room Extremely large rooms or rooms with lots of wireless electronics wi fi routers radio transmitters etc may affect your ability to pair 2 Check to see if any other devices are already connected to the PS 2350 The speakers can only pair with one device at a time If you need to unpair choose forget this device from your source Then follow the setup pairing options as detailed in this document 3 Check the battery life of your source device and charge if necessary Most devices operate best when charged above a 20 minimum battery level Additional support Online The latest updated video tutorials FAQ and product feature specifications are available online 24 7 http cyberacoustics com In person Technical support is also available at 360 883 0333 M F 8 5 PST FCC STATEMENT 1 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation 2 Changes or modifications not expressly appr
10. ufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the cart apparatus combination to avoid injury from tip over G OMONOAAKRWD 13 Unplug the apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way Such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that CAUTION contained in the operating instructions unless you are qualified to do so RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQE NE PAS OUVRIR 16 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock Warning To reduce the risk of electric shock do not remove cover or back as there are no user serviceable parts inside Refer servicing to qualified personnel The
Download Pdf Manuals
Related Search