Elo Touch Solution 15E1
Contents
1. 2 The equipment requires the use of the ground wire as a part of the safety certification Modification or misuse can provide a shock hazard that can result in serious injury or death 3 Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to main power Il Emissions and Immunity Information A Notice to Users in the United States This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential or commercial installation This equipment generates uses and can User Guide E Series AiO Touchcomputer SW601671 Rev D Page 15 of 21 radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications B Notice to Users in Canada This equipment complies with the Class B limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada C Notice to Users in the European Union Use only the provided power cords and interconnecting cabling provided with the equipment Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards This Informa2. SAFETY AND MAINTENANCE Important information regarding the proper setup and maintenance of your touchcomputer To reduce the risk of electric shock follow all safety notices and never open the touchcomputer case Turn off the product before cleaning refer to Care and Handling for proper cleaning methods Your touchcomputer is equipped with a 3 wire grounding power cord The power cord plug only fits into a grounded outlet Do not attempt to fit the plug into an outlet that has not been configured for this purpose Do not use a damaged power cord Only use the power cord that comes with your Elo Touch Solutions touchcomputer Use of an unauthorized power cord might invalidate your warranty The slots located on the sides and top of the touchcomputer case are for ventilation Do not block or insert anything inside the ventilation slots It is important that your touchcomputer remains dry Do not pour liquid into or onto your touchcomputer If your touchcomputer becomes wet do not attempt to repair it yourself Contact Elo Customer Service for instructions User Guide E Series AiO Touchcomputer SW601671 Rev D Page 11 of 21 Care and Handling The following tips help keep your touchcomputer functioning at the optimal level To avoid risk of electric shock do not disassemble the power adapter or display unit cabinet The unit is not user serviceable Remember to unplug the display unit from the power outlet before cleanin
3. USER MANUAL Elo Touch Solutions 15 6 Widescreen E Series All in One Touchcomputer SW601671 Rev D Copyright 2013 Elo Touch Solutions Inc All Rights Reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means including but not limited to electronic magnetic optical chemical manual or otherwise without prior written permission of Elo Touch Solutions Inc Disclaimer The information in this document is subject to change without notice Elo Touch Solutions Inc and its Affiliates collectively Elo makes no representations or warranties with respect to the contents herein and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes Trademark Acknowledgments AccuTouch CarrollTouch Elo Elo logo Elo Touch Elo Touch Solutions Elo TouchSystems IntelliTouch iTouch SecureTouch TouchTools and VuPoint are trademarks of Elo and its Affiliates Windows is a trademark of Microsoft Corporation Table of Contents Chapter 17 Setups ressar E aee eaa anaa ddA EEEE cece cate seceeusnueccnsuausouany 4 Unpacking Your Touchcomputer s esssesssessesssesesesese
4. ARRANTY EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE SELLER GRANTS NO OTHER WARRANTIES EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE REGARDING THE PRODUCTS THEIR FITNESS FOR ANY PURPOSE THEIR QUALITY THEIR MERCHANTABILITY THEIR NONINFRINGEMENT OR OTHERWISE NO EMPLOYEE OF SELLER OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WARRANTY FOR THE GOODS OTHER THAN THE WARRANTY SET FORTH HEREIN SELLER S LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO A REFUND OF THE PURCHASE PRICE OF THE PRODUCT IN NO EVENT SHALL SELLER BE LIABLE FOR THE COST OF PROCUREMENT OR INSTALLATION OF SUBSTITUTE GOODS BY BUYER OR FOR ANY SPECIAL CONSEQUENTIAL INDIRECT OR INCIDENTAL DAMAGES Buyer assumes the risk and agrees to indemnify Seller against and hold Seller harmless from all liability relating to i assessing the suitability for Buyer s intended use of the Products and of any system design or drawing and ii determining the compliance of Buyer s use of the Products with applicable laws regulations codes and standards Buyer retains and accepts full responsibility for all warranty and other claims relating to or arising from Buyer s products which include or incorporate Products or components manufactured or supplied by Seller Buyer is solely responsible for any and all representations and warranties regarding the Products made or authorized by Buyer Buyer will indemnify Seller and hold Seller harmless from any liability claims loss cost or expe
5. E SCREW TYPE FOR WALL MOUNTING 2 Second monitor mount onto your system any monitor under 2 5 Kg with 75mm VESA mount OPTIONAL ETO 00 MONITOR TOUCH NONI TOR ATTACHED MOUNTING PLATE TO MONITOR WITH 4 M4 SCEWS PROVIDED HOOK AND PI FACE DOWN User Guide E Series AiO Touchcomputer SW601671 Rev D Page 7 of 21 CHAPTER OPERATION This chapter describes how to interact with the Elo Touch Solutions diagnostic tool power LED and input output panel Elo Touch Solutions E Series Hardware Monitoring Utility How to Install The utility is included in the driver CD Please go to E Series Hardware Monitor folder located on the driver CD to install the utility E Series Hardware Monitor Menu System Display Hardware Monitor Setting Alarm About Platform Drive Information BIOS Version X019 05 26 2011 C Fixed X Operating System Used Space 8 535 052 288 bytes B Fe space 124 245 073 920 bytes Capacity 132 780 126 208 bytes Operating System Microsoft Windows NT 6 1 7600 0 Computer Name PC User Name Elo Memory Information Total Physical Memory Free Physical Memory Total Virtual Memory Free Virtual Memory 1 038 840 KB 617 464 KB 2 097 024 KB 1 943 240 KB User Guide E Series AiO Touchcomputer SW601671 Rev D Page 8 of 21 The Hardware Monitor tool provides the following features Feature Description System Display the BIOS ve
6. RANTY INFORMAT ION sssssssnsunnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 19 CHAPTER SETUP This chapter discusses how to set up and test your touchcomputer Unpacking Your Touchcomputer Check that the following items are present and in good condition Touchcomputer Power cable Europe Wall Mounting Quick Install Guide 8 x M4 1 x M3 User Guide E Series AiO Touchcomputer SW601671 Rev D Page 4 of 21 Adjusting the Display The display screen can be adjusted from 17 to 75 degrees as shown below 17 75 CAUTION To prevent tipping or dropping be sure to hold the base when adjusting the display User Guide E Series AiO Touchcomputer SW601671 Rev D Page 5 of 21 Calibrating the Touchscreen The touchscreen is pre calibrated for accurate touch response If for any reason the touchscreen needs to be recalibrated For Windows XP right click the Elo icon in the Taskbar and then click Align for Windows XP or double click the Elo Alignment shortcut on the system desktop for Windows 7 This launches the calibration program The window shown below opens Follow the instructions to calibrate the touchscreen taet mes be o patted ened ow Pity User Guide E Series AiO Touchcomputer SW601671 Rev D Page 6 of 21 Additional Mounting Option for Your System 1 Mounting on the wall or pole WALL POLE MOUNT WITH PROVIDED BRACKET ASSEMBLY CUSTOMER WALL OR POLE HOOSE APPROPRIAT
7. Within thirty 30 days after submitting such notice Buyer shall package the allegedly defective Product in its original shipping carton s or a functional equivalent and shall ship to Seller at Buyer s expense and risk Within a reasonable time after receipt of the allegedly defective Product and verification by Seller that the Product fails to meet the warranty set forth above Seller shall correct such failure by at Seller s options either i modifying or repairing the Product or ii replacing the Product Such modification repair or replacement and the return shipment of the Product with minimum insurance to Buyer shall be at Seller s expense Buyer shall bear the risk of loss or damage in transit and may insure the Product Buyer shall reimburse Seller for transportation cost incurred for Product returned but not found by Seller to be defective Modification or repair of Products may at Seller s option take place either at Seller s facilities or at Buyer s premises If Seller is unable to modify User Guide E Series AiO Touchcomputer SW601671 Rev D Page 19 of 21 repair or replace a Product to conform to the warranty set forth above then Seller shall at Seller s option either refund to Buyer or credit to Buyer s account the purchase price of the Product less depreciation calculated on a straight line basis over Seller s stated Warranty Period THESE REMEDIES SHALL BE THE BUYER S EXCLUSIVE REMEDIES FOR BREACH OF W
8. e phone Using the Web For online self help go to www elotouch com go websupport For technical support go to www elotouch com go contactsupport For current Elo news product updates and announcements or to register to receive our Touchcomputer newsletter go to www elotouch com go news Using the Phone For technical support see the table at the end of the user guide for contact information User Guide E Series AiO Touchcomputer SW601671 Rev D Page 14 of 21 CHAPTER REGULATORY INFORMATION l Electrical Safety Information A Compliance is required with respect to the voltage frequency and current requirements indicated on the manufacturer s label Connection to a different power source than those specified herein may result in improper operation damage to the equipment invalidation of warranty or a fire hazard if the requirements are not followed B There are no operator serviceable parts inside this equipment There are hazardous voltages generated by this equipment which constitute a safety hazard Service should be provided only by a qualified service technician C This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet 1 Do not substitute the cord with other than the provided approved type Under no circumstances use an adapter plug to connect to a 2 wire outlet as this defeats the continuity of the grounding wire
9. erence try to correct the interference by using one or more of the following measures i Move the digital device away from the affected receiver ii Reposition turn the digital device with respect to the affected receiver iii Reorient the affected receiver s antenna iv Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits User Guide E Series AiO Touchcomputer SW601671 Rev D Page 16 of 21 v Disconnect and remove any I O cables that the digital device does not use Unterminated I O cables are a potential source of high RF emission levels vi Plug the digital device into only a grounded outlet receptacle Do not use AC adapter plugs Removing or cutting the line cord ground may increase RF emission levels and may also present a lethal shock hazard to the user vii If you need additional help consult your dealer manufacturer or an experienced radio or television technician Agency Certifications The following certifications have been issued for the touchcomputer CE China CCC Russia GOST Ukraine Belarus BelGiss Croatia KONCAR UKSERTCOMPUTER Serbia KVALITET Bosnia KVALITET Israel SII Mexico NOM CoC IV China RoHS In accordance to Chinese law Administration on the Control of Pollution Caused by Electronic Information Products the section below lists out the name and amount of
10. g Do not use alcohol methyl ethyl or isopropyl or any strong solvent Do not use thinner or benzene abrasive cleaners or compressed air To clean the display unit cabinet use a cloth lightly dampened with a mild detergent Avoid getting liquids inside your touchcomputer If liquid does get inside have a qualified service technician check it before you power it on again Do not wipe the screen with a cloth or sponge that could scratch the surface To clean the touchscreen use window or glass cleaner Put the cleaner on the rag and wipe the touchscreen Never apply the cleaner directly on the touchscreen WEEE Directive In the European Union the Waste Electrical and Electronic Equipment WEEE directive label shown to the left indicates that this product should not be disposed of with household waste It should be deposited at an appropriate facility for recovery and recycling User Guide E Series AiO Touchcomputer SW601671 Rev D Page 12 of 21 UL Directive E Series touchcomputer has included a lithium battery on the motherboard There is a risk of explosion if battery is replaced by an incorrect type Please dispose of used batteries according the region instructions User Guide E Series AiO Touchcomputer SW601671 Rev D Page 13 of 21 CHAPTER TECHNICAL SUPPORT Technical Assistance There are two methods to obtain contact information for technical assistance on the touchcomputer e The web e Th
11. injury or damage to any assets Operating Temperature 0 35 C Humidity 20 80 non condensing Storage Temperature 30 60 C Humidity 5 95 non condensing 2 It is encouraged and recommended that this product be recycled and reused according to local laws The product should not be thrown away casually A Soe User Guide E Series AiO Touchcomputer SW601671 Rev D Page 18 of 21 CHAPTER WARRANTY INFORMATION Except as otherwise stated herein or in an order acknowledgment delivered to Buyer Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship With the exception of the negotiated warranty periods the warranty for the touchcomputer and components of the product is one 1 year Seller makes no warranty regarding the model life of components Seller s suppliers may at any time and from time to time make changes in the components delivered as Products or components Buyer shall notify Seller in writing promptly and in no case later than thirty 30 days after discovery of the failure of any Product to conform to the warranty set forth above shall describe in commercially reasonable detail in such notice the symptoms associated with such failure and shall provide to Seller the opportunity to inspect such Products as installed if possible The notice must be received by Seller during the Warranty Period for such product unless otherwise directed in writing by the Seller
12. nses including reasonable attorney s fees attributable to Buyer s products or representations or warranties concerning same User Guide E Series AiO Touchcomputer SW601671 Rev D Page 20 of 21 Check out our website www elotouch com Get the latest e Product information e Specifications e News on upcoming events e Press release e Software drivers Getting in Touch with Us To find out more about the extensive range of Elo touch solutions visit our website at www elotouch com or simply call the office nearest you Europe Asia Pacific Latin America Tel 32 0 16 70 45 00 Tel 86 21 3329 1385 Tel 786 923 0251 Fax 32 0 16 70 45 49 Fax 86 21 33291400 Fax 305 931 0124 elosales elotouch com www elotouch com cn www elotouch com Copyright 2013 Elo Touch Solutions Inc All rights reserved User Guide E Series AiO Touchcomputer SW601671 Rev D Page 21 of 21
13. rsion operating system version memory information and drive information Display Adjust brightness e Brightness Adjust the backlight of the monitor Hardware Monitor the CPU temperature system temperature and system Monitor output voltages Alarm Display the record of all alarms About General information for the E Series diagnostic tool Setting Set alarms when the CPU temperature system temperature and output voltages that meet the setting criterion LED Functionality The E Series base has a LED indicating the state of the touchcomputer The table below shows LED state and corresponding color LED Color to Observer State Off No input power Off mode Red Input power present Off or Hibernation mode Input power present Standby mode S3 Blinking Green Input power present Standby mode S1 Input power present Power on User Guide E Series AiO Touchcomputer SW601671 Rev D Page 9 of 21 Accessing the Input Output Panel To access the input output I O ports remove the I O cover at the left of the unit A security screw is included and may be used to secure the front cover to the touchcomputer Below are the I O descriptions DC IN VGA COM2 COM1 USB2 USB3 USBO USB1 LAN Line Out Note As a safety precaution always leave the I O cover attached when the system is powered on User Guide E Series AiO Touchcomputer SW601671 Rev D Page 10 of 21 Safety CHAPTER
14. sestssstssesssesssesesesesesesenssensesssesesenssensestseseses 4 Adjusting the Displays e e a a wana teas 5 Calibrating the Touchscreen s s sessesesesesesesessesssesesesesesesesesessesteesesesesesesesesssesesesesesesesseeseesese 6 Additional Mounting Option for Your System s sssesssessessseseseseseeesessresseseseseseseserssessessseseses 7 Chapter 2 Operaton xcccssssscccecccccecccecsteveyaceceenttieescsasiccccccccccsssensisbielssanks 8 Elo Touch Solutions E Series Hardware Monitoring Utility 0 0 eceeeeeeteeeeeeeeeeeeees 8 DED UIC H OM ANIL A E a oasasnvaeas tuuuessna A 9 Accessing the Input Output Panel sosnetesgsxmciaan aviv enssicacnaernens nicole anna deena 10 Chapter 3 Safety and Maintenance cccccccceeeenseeeeeeeeeeeeeeeneeeeeees 11 Safety eena tara E uasiyhendnsaniaatsa E au Gime E 11 Care and Handling resesi E EE EE E E R E E 12 Chapter 4 Technical SUpport ssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnna 14 Technical Assistance et aa aa ae esa ee Ee aN Ta aaa aaaea iar rni Teises 14 Chapter 5 REGULATORY INFORMATION ccccccseeeeeeeeeeeeeeeeeeeees 15 l Electrical Safety Information ses cvsscescctesson vectuvseutvensdesexeeotiqavrensercorvetenatea ete tuseortee vives 15 I Emissions and Immunity Information cceesecseseeseeeesceseseeseseeseeeesceeeseeeeaeaeneeeeeeees 15 IIl Agency CerificatloNnS rsss sisie eisa ab Eee arisi i 17 IV 712 Wl 0 S T E E R E E IT 17 Chapter 6 WAR
15. the toxic and or hazardous materials that this product may contain Componen Toxic or Hazardous Substances and Elements t Name Lead Pb Mercury Hg Cadmium Cd Hexavalen Polybrominate Polybrominate t d d Diphenyl Chromium Biphenyls Ethers PBDE Cr6 PBB Plastic O O O O O O Parts Metal X O O O O O Parts Wire and X O O O O O Cable Assembly LCD Panel X O O O O O User Guide E Series AiO Touchcomputer SW601671 Rev D Page 17 of 21 Touch X O O O O O Screen Panel PCBA X O O O O O Software O O O O O O CD etc O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this component is below the limit requirement in SJ T11363 2006 X Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this component is above the limit requirement in SJ T11363 2006 For items marked with X exemptions were taken according to EU RoHS Explanation of Markings 1 In accordance with the SJ T11364 2006 requirement the electronic information products are marked with the following pollution control logo The Environment Friendly Use Period for this product is 10 years The product will not leak or mutate under normal operating conditions listed below so that the use of this electronic information product will not result in any severe environmental pollution any bodily
16. tion Technology Equipment ITE is required to have a CE Mark on the manufacturer s label which means that the equipment has been tested to the following Directives and Standards This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 2004 108 EC indicated in European Standard EN 55022 Class B and the Low Voltage Directive 2006 95 EC as indicated in European Standard EN 60950 1 D General Information to all Users This equipment generates uses and can radiate radio frequency energy If not installed and used according to this manual the equipment may cause interference with radio and television communications There is however no guarantee that interference will not occur in any particular installation due to site specific factors 1 In order to meet emission and immunity requirements the user must observe the following a Use only the provided cables to connect the Elo touchcomputer b To ensure compliance use only the provided manufacturer s approved power cord c The user is cautioned that changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 If this equipment appears to cause interference with radio or television reception or any other device a Verify as an emission source by turning the equipment off and on b If you determine that this equipment is causing the interf
Download Pdf Manuals
Related Search