Vogel's PFW 6870 flat panel wall mount
Contents
1. Page 8 Installation Instructions dgel s UE Installing the Mounting Brackets Selecting the Mounting Hardware 1 Inserta small straw or toothpick into the threaded inserts found on the back of the flat panel 2 Use a pencil to mark the depth of the threaded Insert on the small straw or toothpick 3 Mark the straw or toothpick 1 8 above the depth of the threaded insert as shown in Figure 1 4 Insertthe small straw or toothpick into the remaining d 4 threaded inserts to compare and verify their depth using the straw or toothpick s 1 8 allowance mark 5 Locate the correct diameter screw for the threaded insert If the screw you selected is longer than the 1 8 allowance mark on the small straw or toothpick as shown in Figure 2 and Figure 3 do not use this screw The screw length must not bypass the mark Marking the 1 8 Allowance Marking the Depth 6 Test each size of the screws provided Threaded Insert The correct screws should thread easily into the mounting point and not pull out when tension is applied Small Straw or Toothpick Go to Griplate Washer Installation on page 10 N WW Small Straw K Plus 1 8 Allowance Mark Small Straw K Plus 1 8 Allowance or Toothpick or Toothpick Mark Installation Instructions Page 9 dgel PFW 6870 professional Installing the Mounting Bracket cont d Univ2. E EAE TEET s 17 Weight Limit THE WALL STRUCTURE MUST BE CAPABLE OF m SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF Maximum Flat panel Weight f 3 kg THE FLAT PANEL IF NOT THE WALL STRUCTURE MUST BE REINFORCED Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED AS OUTLINED STOP IN THESE INSTALLATION INSTRUCTIONS FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE SERIOUS PERSONAL INJURY OR EVEN DEATH SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT USE PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY VOGEL S DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY VOGEL S PRODUCT FOR STOP PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS AND IS NOT RESPONSIBLE FOR ANY DAMAGES CLAIMS DEMANDS SUITS ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE ATTACHMENTS OR MODIFICATIONS At least two qualified people should perform the assembly procedure Personal injury and or property damage can result from dropping
3. x g i vagel s e professional PFW 6870 Video Wall Pop Out Module INSTALLATION INSTRUCTIONS 9541 000 Z00 01 C daers gels Contents b ciere EES O O ERR 2 Waning StatemenlS n 2 Iu cuis 3 3 5 lislalling MNE MOUNE e en 6 WRC CU p NER 6 Installing Optional Model Specific Spacers 8 Mstaling the Mounting SLACK ONS u L LULU aa e o UN bt 9 Selecting the Mounting Hardware sess 9 Universal Washer Installation a sites uso PE 10 Universal Spacer Installation ns 10 Attaching the Mounting Brackets to the Flat Panel 11 Mounting the Flat Panel MNT 11 Attaching the Flat Panel to the 11 Locking Safety Screw Installation 12 Post Installalion uu u L u u e 12 Maintenance and Servicing MRE 15 T hic SIS Gf 198 TETTE Omm 16 VV ili A E
4. or mishandling the flat panel If mounting to wall studs or ceiling studs make sure that the mounting screws are anchored into the center of the wall studs or ceiling studs Use of an edge to edge stud finder is recommended A It is recommended that a maximum of e plaster board be used when mounting to wooden studs Be aware of the mounting environment If drilling and or cutting into the mounting surface always make sure that there are no electrical wires in wall Cutting or drilling into an electrical line may cause serious personal injury Make sure there are no water or natural gas lines inside the wall where the mount is to be located Cutting or drilling into a water or gas line may cause severe property damage or personal injury This product is intended for indoor use only Use of this product outdoors could lead to product failure and or serious personal injury Do not install near sources of high heat Do not install on a structure that is prone to vibration movement or chance of impact Page 2 Installation Instructions dgel s UNE Installation Tools The following tools may be required depending on your installation 7 Electronic Stud Finder Pencil Protective Eyewear Portable Drill 1 4 Drill Bit v2 Socket Phillips Head Screwdriver Socket Wrench Parts List PFW 6870 Video Wall Pop Out Module Assembly Components One Latch Mounting Base Left and Right Mounting Bracket Qty 1 Each 95 1
5. 6 Flat Washers Universal Spacers 3 16 Allen Wrench Thread Depth Indicator Universal Washers Qty 4 Qty 12 Qty 1 Qty 1 Qty 6 Pro Mounting Hardware 16 Concrete Wedge Anchors 16 x 3 Lag Bolts Qty 4 Qty 4 Installation Instructions Page 3 PFW 6870 professional A amp dgers C Parts List cont d un gt S un D 5 EWM DD ED OM M6 x 12mm Screw ED MD OM MD OM M4 x 12mm Screw amp 5 EDD amp EDD yy M6 x 16mm Screw amp yy amp 55 yy amp 55 yy M4 x 16mm Screw amp 99 DDD EDD amp 0 M6 x 25mm Screw amp yyy amp 0 amp 59 amp 2 amp 92 amp 20 M4 x 25mm Screw ey OM DD M8 x 12mm Screw OM BD M5 x 12mm Screw amp 55 yy EDD EDD EDD EDD M8 x 16mm Screw amp DD DD EDD EDD EDD EDD M5 x 16mm Screw EDD amp 2 EDD DDD amp yyy amp 0 M8 x 25mm Screw amp 9 amp 2 amp 9 EDD EDID amp 0 M5 x 25mm Screw Installation Instructions Page 4 gels Features PFW 6870 The PFW6870 Video Wall Pop Out Module is a customizable video wall mounting system featuring multi monitor stacking open design custom spacers and scissor mount extension It has an extending scissor mount for easy installation cable management and ser
6. PFW 6870 to extend the scissor arms Figure 2 3 Loosen the locking safety screws on both mounting brackets 4 Tiltup the bottom of the flat panel then set their kickstands against the bottom tubing of the mount Figures 2 amp 3 You can now reach behind the flat panel for maintenance and servicing or replacement After servicing make sure the spring lock is locked again in the mount s closed position Installation Instructions Simgle Latch Spring Lock Figure 1 Figure 2 Figure 3 PFW 6870 Page 15 Wagers Technical Specifications All measurements are in inches millimeters Ml m h Page 16 Installation Instructions
7. Place the mount against the wall in the desired viewing location Adjust the mount to align the mount slots in the mount with the center of the wall studs Level the mount Use a pencil to mark the upper right mounting location along the center of the wall stud Drill a pilot hole in the center of the upper right mark using a 74 drill bit and power drill Only use a 74 drill bit when drilling pilot holes Page 6 Installation Instructions PFW 6870 orofessional Installalation Step 4 Place the mount against the wall and align it with the pilot hole Insert one 1 he x 3 lag bolt and one 1 he washer into the upper right pilot hole Use a socket wrench and a socket to tighten the lag bolt Do not overtighten the lag bolt Level the mount Use a pencil to mark the remaining four 4 mounting locations along the center of each wall stud Step 6 Two people are recommended for this step one person to level the mount and another person to drill the pilot holes Drill a pilot hole in the center of each of the marks with a power drill and a drill bit A Only use 74 drill bit when drilling the pilot holes Insert one 1 x 3 lag bolt and one 1 e washer into each pilot hole Tighten all lag bolts using a socket wrench and 72 socket Do not overtighten the lag bolts when attaching the mount to the wa
8. ersal Washer Installation Vogel s Universal Washers are designed to accommodate the various M4 M5 M6 and 8 hole sizes required by flat panels Do not place excessive pressure on the back of the flat panel as this may damage your flat panel The Universal Washer must be installed between the head of the mounting screw and the mounting bracket as shown Does your flat panel have Recessed mount points Uneven mount points Acurved back Any obstruction near the mount point If Yes you must install Universal Spacers Remove the mounting brackets Universal Washers and mounting screws from the back of the flat panel Proceed to the Universal Spacer Installation section If No skip to the Attaching the Mounting Bracket to the Flat Panel section Universal Spacer Installation Vogel s Universal Spacers allow you to attach the mounting bracket to flat panels which have recessed or uneven mount points Each Universal Spacer adds 1 4 noun Sele to the distance between the mounting bracket and your flat panel Universal Washer The Universal Spacers must be stacked and Mounting Bracket oriented as shown The Universal Spacers must only be installed between the mounting bracket and your flat panel Flat Panel Proceed to the Attaching the Mounting Bracket to Universal Spacer the Flat Panel section Mount Point a The Universal Spacers Fit M4 M5 M6 and M8 screw siz
9. es Page 10 Installation Instructions dges Te Installing the Mounting Brackets cont d Attaching the Mounting Brackets to the Flat Panel This section presumes that you have read and understood thes Selecting the Proper Mounting Hardware section Place your flat panel screen side down on a soft flat surface Identify the number and location of the thread inserts on the back of your flat panel Aligning the holes on each mounting bracket with the thread inserts on the back of your flat panel Secure each mounting bracket to your flat panel by inserting a minimum of two 2 screws per bracket A Do not overtighten the mounting hardware Make sure the directional arrows on the mounting brackets are facing up Proceed to the Mounting the Flat Panel below Mounting the Flat Panel Attaching the Flat Panel to the Mount He Mounting bracket adjustments are factory pre set see Note This section requires two people u mm XR A Note These registers must align prior to installation They are factory set Check to determine proper alignment Do not release flat panel until you are certain that top and bottom hooks of both mounting brackets are securely seated on the upper and lower mounting rails of the wall panel 1 Raise the flat panel past the top and bottom mounting rails on the wall panel 2 Slide the flat panel down slowly keeping it close to the wall 3 En
10. gage the top and bottom mounting brackets to the rails of the mount e e e E oen emm j J Installation Instructions Page 11 Gages orofessional PFW 6870 Locking Safety Screw Installation The locking safety screws keep the flat panel from being accidently dislodged from the PFW 6870 Locate the pre installed security locking safety screw at the bottom of each of the mounting brackets Use the Allen key supplied to tighten the locking Pre installed Security safety screw Locking Safety Screw 1 per Bracket A Do not overtighten the locking safety screws Proceed to the Post Installation Adjustments below Post Installation Adjustments The PFW 6870 has a set of post installation adjustments on each mounting bracket Figure 1 See Note Use Allen key supplied to fine tune adjust See Note Make sure the the locking safety screws are loosened before making adjustments Note Screws have a limited travel adjustment Do not overtighten or over adjust the screw to avoid damage to threaded holes Figure 1 Move Inward A Left Control Right Control Move Outward b k OUT Left Control Right Control Page 12 Installation Instructions Post Installation Adjustments cont d Tilt Left Left C
11. ll Improper installation may result in personal injury or property damage If you are using OPTIONAL model specific spacers proceed to the Installing Optional Model Specific Spacers on page 8 If not proceed to Installing the Mounting Bracket on page 9 Installation Instructions Page 7 agers Installing OPTIONAL Model Specific Spacers PFW 6870 s dedicated flat panel spacers are engineered with the knowledge that aligning each flat panel on a large wall is time consuming and costly These model specific spacers are available for most flat panels which significantly reduces the installation time Call Customer Service to inquire about model specific spacers This spacer is shown for illustration purposes only Your spacer may look different depending on the display model you are installing 1 Once your PFW 6870 is mounted in the desired location and is level align your spacer to the top left or right depending on your install direction corner register tabs of your mount You may use commercially available hardware to secure the spacer to the wall during installation depending on the wall material You may utilize the same spacer for multiple PFW 6870 installations Register Tabs 4 amma Register Tabs Multiple PFW 6870 mounts can be installed using model specific spacers Simply repeat step one when installing each of the surrounding PFW 6870 mou
12. nts Use one spacer for each 2x2 installation by mounting it to the wall or utilize the same spacer as many times needed to complete an unlimited PFW 6870 video wall pop out module 1 Make sure the spacer is plumb and level and mark each corner where the PFW 6870 will be mounted or secure to the wall It is best to start from the bottom corner and work your way up Install the second mount working in a horizontal direction Ensure that the mount remains plumb and level Repeat this step for each mount horizontally To install multiple rows place spacer between previously installed PFW 6870s on the bottom row Make sure the spacer is plumb and level mark the corners or secure to the wall to be sure of where the PFW 6870 should be and secure your mount to the wall EE m Ta ri 4 p
13. ontrol Tilt Right f OUT Left Control Tilt Up Left Control TILT Left Control Installation Instructions Tilt Down from tilted up position Right Control 9 Right Control 5 TILT Right Control fo TILT Right Control PEW 6870 Page 13 Xvogers e professional Post Installation Adjustments cont d Level Up LEVEL LEVEL amp amp Left Control Right Control Level Down from leveled up position gt gt Left Control Right Control Rotate Left amp Left Control Right Control Rotate Right 5 fs Left Control Right Control Page 14 PFW 6870 oC n S e ee oqrpoqrp gt U gt Bo CGDOMD Installation Instructions lt orofessiong Maintenance and Servicing 1 Push evenly in the front of the PFW 6870 to release the single latch spring lock Figure 1 2 Slowly pull the front of the
14. vicing Spacers are custom designed for specific flat panels Post Installation Adjustments Patent pending leveling tilt and in out adjustment knobs make it easier than ever to flush and level the flat panels for a seamless video wall Cable Electrical Access Allows for easy cable access and power distribution installations Kickstand Prop up the flat panel with the kickstand for easy maintenance Spring Lock Simply push the mounting rails in to lock or unlock the mount from the closed position Locking Safety Screws Prevent the flat panel from being removed or dislodged from the mount Use an optional Lock It security barrel for added protection Installation Instructions Page 5 Wagers Installalation Introduction Directional Mounting Arrow The Directional Mounting Arrow stamped into the PFW 6870 mount indicates which edge is the top Mounting Safety Two people are recommended to install the mount You must secure the mount to two 2 wall studs with four 4 lag bolts 2 lag bolts for each stud found 1 Use a stud finder to determine the exact center of wall studs in the vicinity of the mount 2 Use a pencil to mark the exact center of each of the wall studs Two people are recommended for this step one person to level the mount and another person to mark the wall stud location
Download Pdf Manuals
Related Search