Home

Netgear PR2000

Contents

1. Type the advertisement time to live in hops Advanced Settings 121 Trek N300 Travel Router and Range Extender PR2000 The time to live for the advertisement is measured in hops steps for each UPnP packet sent Hops are the steps a packet takes between routers The number of hops can range from 1 to 255 The default value for the advertisement time to live is 4 hops which is fine for most home networks If you notice that some devices are not being updated or reached correctly it might be necessary to increase this value Click the Apply button The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the Trek and which ports internal and external that device has opened The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address 10 To refresh the information in the UPnP Portmap Table click the Refresh button Traffic Meter Traffic metering allows you to monitor the volume of Internet traffic that passes through the Trek Internet port You can set limits for traffic volume Traffic metering is available only when the Trek is operating in wired WAN mode For more information about connection modes see nternet Setup on page 34 gt To monitor Internet traffic 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address
2. 10 In the Read Access list and the Write Access list select the settings that you want The user name account name for All no password is guest The password for admin is the same one that is used to log in to the Trek By default it is password 11 Click the Apply button The folder is added on the USB device To edit a network folder 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select BASIC gt ReadySHARE BASIC Home USB Storage Basic Settings Internet pasic Wireless O ReadySHARE Printer Attached Devices gt NetworkDevice Name z weadyshare Profile Settings gt Available Network Folders ReadySHARE Share Name Read Access Write Access Folder Name Volume Name Total Space Free Space Edit Safely Remove USB Device Help Center USB Port 75 Trek N300 Travel Router and Range Extender PR2000 6 Click the Edit button USB Storage Advanced Settings Network Device Name readyshare Workgroup Workgroup Enable Access Method Link Network Neighborhood MacShare weadyshare HTTP httpvireadyshare r
3. Fine tune your network This chapter describes the advanced features of your Trek This information is for users with a solid understanding of networking concepts who want to set up the Trek for unique situations such as remote access from the Internet by IP or domain name The chapter includes the following sections Advanced Wireless Settings Dynamic DNS Static Routes Remote Management Universal Plug and Play Traffic Meter For added security you can set up the Trek to share only approved USB devices For more information see Specify Approved USB Devices on page 76 108 Trek N300 Travel Router and Range Extender PR2000 Advanced Wireless Settings You can turn the wireless radio on and off specify WPS settings and set up a wireless access list The Fragmentation Length CTS RTS Threshold and Preamble Mode options in this screen are reserved for wireless testing and advanced configuration only Do not change these settings unless you have a specific reason to do so Control the Wireless Radio By default the wireless radio is enabled so that you can connect wirelessly to the Trek You can turn the wireless radio on or off in the Advanced Wireless Settings screen When the wireless radio is off you can still use an Ethernet cable for the WAN and LAN connections to the Trek gt To turn the wireless radio on or off 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter ww
4. 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Administration gt Logs Internet disconnected DHCP IP 192 168 1 2 to MAC address 00 13 02 12 13 3F Internet disconnected Initialized firmware version V1 0 0 03_1 0 1 trial Include in Log Y Attempted access to allowed sites Attempted access to blocked sites and services Connections to the Web based interface of this Router Known DoS attacks and Port Scans v v V Router operation startup get time etc v v v Port Forwarding Port Triggering Wireless access 2 Help Center ShowHide Help Center 6 Select the following check boxes for the events that you want to include in the log e Attempted access to allowed sites e Attempted access to blocked sites and services e Connections to the Web based interface of this Router e Router operation startup get time etc e Known DoS attacks and Port Scans e Port Forwarding Port Triggering e Wireless access 7 Click the Apply button Administration 103
5. 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Administration gt Set Password ADVANCED ADVANCED Home Set Passwo Set Password gt Setup Repeat New Password gt Security C Enable Password Recovery v Administration Router Status Logs Attached Devices Backup Settings Firmware Upgrade gt Advanced Setup 6 Select the Enable Password Recovery check box 7 Select two security questions and provide answers to them 8 Click the Apply button gt To recover your password 1 In the address field of your browser type www routerlogin net A login screen displays 2 Click the Cancel button If password recovery is enabled you are prompted to enter the serial number of the Trek The serial number is on the product label Get Started with NETGEAR genie 28 Trek N300 Travel Router and Range Extender PR2000 Enter the serial number of the Trek Click the Continue button A screen displays requesting the answers to your security questions Enter the saved answers to your security questions Click the Continue button A screen displays your recovered password Click the Login again button A login screen displays With your recovered password log in to the Trek Add Wireless Devices or Computers to Your Trek Connect wireless devices such as desktops laptops smartphones and tablets to your Trek You can connect these WiFi devices either manually or using the W
6. Current Date Time Thursday 3 Oct 2013 07 32 PM Traffic Volume Left0 Bytes Period Connection Time Traffic Volume Mbytes ae hh mm Upload Avg DownloadiAvy TotaliAvy Today Yesterday This week This month Last month 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 7 To update the Traffic Statistics section click the Refresh button 8 To display more information about the data traffic on your Trek and to change the poll interval click the Traffic Status button affic Status Counting Period Amount Used 0 00 0 00 Mbytes Poumon 0 Jee QS Advanced Settings 125 Troubleshooting Diagnose and solve problems This chapter provides information to help you diagnose and solve problems you might have with your Trek If you do not find the solution here visit the NETGEAR support site at support netgear com for product and contact information The chapter contains the following sections e Quick Tips e Troubleshoot with the LEDs e Cannot Log In to the Trek e Cannot Access the Internet e Changes Not Saved e Incorrect Date or Time e Wireless Connectivity e Restore the Factory Settings and Password e Troubleshoot Your Network Using the Ping Utility 126 Trek N300 Travel Router and Range Extender PR2000 Quick Tips You can save time by troubleshooting the common pr
7. Help and Support NETGEAR PR2000 Support NETGEAR Trek Features te eS JE s ADVANCED QoS Upstream and downstream QoS automatically prioritizes streaming and gaming applications Wirelessly Share a USB drive with Macs and PCs Register Your Product genie ADVANCED Home 49 WAN Trek N300 Travel Router and Range Extender PR2000 Setup You can configure a DMZ demilitarized zone server change the maximum transmit unit MTU size and enable the Trek to respond to a ping on the WAN Internet port The Trek does not support a VPN endpoint but it allows traffic from VPN endpoints to pass through gt To change the WAN settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt WAN Setup ADVANCED ADVANCED Home WAN Setup Te D Setup Wizard wps wizara Disable Port Scan and DoS Protection Default DMZ Server y Setup Respond to Ping on Internet Port Internet Setup Wireless Setup MTU Size in bytes 1500 LAN Setup QoS Setup NAT Filtering secured O Open Di
8. London x Automatically adjust for daylight savings time Current Time Frida 34 lan 2014 18 44 NA a BO eet a i Show Hide Help Center The Trek uses the Network Time Protocol NTP to obtain the current time from one of several network time servers on the Internet Each entry in the log is stamped with the date and time of day For more information about the Logs screen see Specify Log Settings on page 102 Problems with the date and time function can include the following e Date shown is January 1 2000 This means the Trek has not successfully reached a network time server Check that your Internet access is configured correctly If you have finished setting up the Trek wait at least five minutes and check the date and time again e Time is off by one hour The Trek does not automatically sense daylight saving time In the Schedule screen select the Automatically adjust for daylight savings time check box Wireless Connectivity If you are having trouble connecting wirelessly to the Trek check the following to try to isolate the problem Does the wireless device or computer that you are using find your wireless network If not check to see of the WiFi LED is lit If it is not you can check to see if the Enable Wireless Router Radio check box on the Advanced Wireless Setting screen is selected Log in to the Trek with an Ethernet cable to check this setting For more information see Advanced Wir
9. MAC address QoS for 64 mail server outgoing 91 maintenance settings 93 managing router remotely 119 maximum transmit unit MTU size 53 metric values static routes 118 mixed mode security options 43 MTU maximum transmit unit size 53 multicasting 56 N NAT Network Address Translation 51 NETGEAR genie setup initial 24 using after installation 25 Network Time Protocol NTP 134 network correct settings checking 127 network restarting 127 O online games QoS for 63 open NAT 51 outgoing mail server 91 P packets fragmented 53 transmitted and received 98 passphrase WPA security 43 password changing 26 recovering 27 restoring 135 photos sharing 78 ping responding to 51 troubleshooting 136 Point to Point Tunneling Protocol PPTP connection status 100 port filtering 88 port numbers 88 port status viewing 98 positioning the router 7 Power LED description 10 troubleshooting 128 PPPoE PPP over Ethernet 100 131 PPTP Point to Point Tunneling Protocol connection status 100 Preamble mode 109 preset security 40 passphrase 43 pre shared key 42 primary DNS addresses 36 38 printing files and photos 78 143 Trek N300 Travel Router and Range Extender PR2000 prioritizing traffic 61 private static route 118 public WiFi hotspots 14 Q QoS Quality of Service 60 R range extender 16 range of wireless connections 7 ReadySHARE access 68 81 received packets 98 recovering
10. NETGEAR Region Asia gt Advanced Setup Channel B P 4 S Mode Up to 300 Mbps Wireless AP Broadcast Name Wireless isolation Help amp Support documentation Online Support Router FAQ Eto Meg Enter Search ltem ee The following information displays e MAC Address The Media Access Control MAC address for the Internet port This address is the unique physical address that the Internet WAN port of the Trek uses e IP Address The IP address that the Internet WAN port of the Trek uses If no address is shown or the address is 0 0 0 0 the Trek is not connected to the Internet e Connection Shows whether the Trek is using a fixed or dynamic IP address on the Internet port If the value is DHCP the Trek obtains an IP address dynamically from the ISP or from a DHCP server on your LAN e IP Subnet Mask The IP subnet mask that the Internet port of the Trek uses e Domain Name Server The Domain Name Server address that the Trek uses A Domain Name Server translates human language URLs such as www netgear com into IP addresses Statistics The Trek provides various statistics Administration 96 Trek N300 Travel Router and Range Extender PR2000 gt To view the traffic statistics 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name
11. USB Port 67 Trek N300 Travel Router and Range Extender PR2000 Set Up Network Storage You can back up the files on your local computers and digital devices to a network drive ReadySHARE lets you access and share a USB drive connected the Trek s USB port The Trek works with most USB compliant external flash and hard drives If your USB device requires nonstandard drivers it is not compatible For the most up to date list of USB drives supported by the Trek visit kobserver netgear com readyshare Connect or Safely Remove a USB Drive The Trek supports both read and write for FAT16 FAT32 NTFS and Linux file systems EXT2 and EXT3 Some USB external hard drives and flash drives require drivers to be loaded into the Windows computer before the Windows computer can access the USB device Such USB devices do not work with the Trek To physically disconnect a USB drive from the Trek USB port first log in to the Trek and then safely remove it gt To connect a USB storage device 1 Insert your USB storage device into the USB port of the Trek For information about how to locate the USB port see Enhance Your Local Network on page 67 2 If your USB device has a power supply you must use it when you connect the USB device to the Trek It might take up to two minutes before the USB device is ready for sharing gt To remove a USB disk drive safely 1 Launch your browser from a computer or wireless device that is connected to
12. USB Storage Basic Settings pasic O ReadySHARE Printer Network Device Name Wreadyshare Available Network Folders ReadySHARE d Share Name Read Access Write Access Folder Name Volume Name Total Space Free Space Safely Remove USB Device Help Center 6 Click the Edit button USB Storage Advanced Settings Network Device Name readyshare Workgroup Workgroup Enable Access Method M Network Neighborhood MacShare HTTP FTP Fi HTTPS via internet O E FTP via internet Available Network Folders Share Name Edit ShowHide Help Center Link weadyshare http readyshare routerlogin netishares https 192 168 0 7 443 shares fipreadyshare routerlogin netishares ftp 192 168 0 7 21 shares Read Access Write Access Folder Name Volume Name TotalSpace Free Space Create Network Folder x Delete Safely Remove USB Device 7 Click the Create Network Folder button Create Network Folder USB Device U HP v100w Y All no password v All no password x Close Window USB Port 74 Trek N300 Travel Router and Range Extender PR2000 If the Create Network Folder screen does not display your web browser might be blocking pop ups If it is then change the browser settings to allow pop ups 8 Click the Browse button next to the Folder field and select the folder 9 Enter a name in the Share Name field
13. Voice over IP 51 W WAN IP address troubleshooting 130 WAN port viewing settings 95 WAN setup 50 WiFi bridge setting up 20 WiFi hotspot connecting to 14 WiFi LED description 11 troubleshooting 128 130 WiFi LED troubleshooting 129 Wi Fi Multimedia WMM 60 Wi Fi Protected Setup WPS devices adding 30 31 144 Trek N300 Travel Router and Range Extender PR2000 keep existing settings 112 WiFi range extender 16 Wireless Card Access List 114 wireless channel 41 wireless connections operating range 7 troubleshooting 134 wireless devices adding to the network 29 wireless mode 41 wireless network name SSID 41 wireless network settings 41 wireless security options 42 wireless settings basic 40 checking for correct 127 SSID broadcast 41 viewing 100 WMM Wi Fi Multimedia 60 WPA encryption 42 WPA2 encryption 42 WPA2 PSK encryption 42 43 WPA PSK WPA2 PSK mixed mode 43 WPS PSK encryption 43 WPS PSK WPA2 PSK encryption 43 wrong date or time 134 145
14. no password is guest The directories of the USB drive that your account has access to display For example you could see share partitionl directoryl You can now read and copy files from the USB directory gt To access the USB drive with ReadySHARE access from the Internet You can access your USB device in any of the following ways e On Windows 7 Windows 8 Windows XP Windows Vista and Windows 2000 systems select Start gt Run and enter readyshare in the dialog box Click the OK button e On Windows 7 Windows 8 Windows XP Windows Vista and Windows 2000 systems open Internet Explorer or Safari and enter readyshare in the address bar e On Mac OS X version 10 2 or later enter smb readyshare in the address bar e In My Network Places enter readyshare in the address bar For more information about ReadySHARE access for USB storage devices visit www netgear com readyshare Set Up a Network Printer The ReadySHARE Printer utility allows you to control from your computer a shared USB printer that is connected to the USB port on your Trek You can share this USB printer among the Windows and Mac computers on your network You must install this utility before you can use the ReadySHARE Printer feature For this feature to work the following conditions must be met e This utility must be installed and running in the background on each computer from which you want to control this USB printer e The driver so
15. ADVANCED ADVANCED Home Setup Wizard Setup Wizard The Smart Setup Wizard can detect the type of Internet connection that you have Do you want the Smart Setup Wizard to try and detect the connection type now Ores gt Setup Ono want to configure the router myself Internet Setup Wireless Setup WAN Setup LAN Setup QoS Setup gt USB Storage gt Security gt Administration gt Advanced Setup Help Center Show Hide Helo Center Select either the Yes or No want to configure the router myself radio button If you select the No button you are taken to the Internet Setup screen For more information see nternet Setup on page 34 genie ADVANCED Home 48 Trek N300 Travel Router and Range Extender PR2000 7 If you selected the Yes button click the Next button Checking your network setup please wait The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration Congratulations You are successfully connected to the Internet This router is preset with the following unique wireless network name SSID and network key password Wireless Network Name SSID NETGEAR Wireless LAN network key password 1234567890 Print this Take me to the Internet 8 Click the Take me to the Internet button NETGEAR Congratulations You have a live Internet connection A NETGEAR genie Manage monitor and repair home networks
16. BASIC gt Attached Devices BASIC Home Internet gt Wired Devices Wireless Wireless Devices Wireless intruders also show up here Profile Settings gt 1 192 168 1 2 00 13 02 12 13 3F MPAWLAN SPARE ReadySHARE Help Center Wired devices are connected to the Trek with Ethernet cables Wireless devices have joined the wireless network The following information displays e number The order in which the device joined the network genie BASIC Settings 44 Trek N300 Travel Router and Range Extender PR2000 e IP Address The IP address that the Trek assigned to this device when it joined the network This number can change if a device is disconnected and rejoins the network e MAC Address The unique MAC address for each device does not change The MAC address is typically shown on the product label e Device Name If the device name is known it is shown here 6 To update this screen click the Refresh button To secure your Trek against WiFi intruders restrict wireless access For more information see Set Up a Wireless Access List by MAC Address on page 113 Profile Settings If you want to use your Trek in more than one type of Internet connection a saved profile lets you make your connections more quickly Save the profiles when you configure an Internet connection Up to 10 profiles can be saved For more information see nternet Setup on page 34 You can view or delete your profiles after you sav
17. Low In the Connection Type field select either TCP UDP or TCP UDP In the Starting Port and Ending Port fields specify the port number or range of port numbers that the application or game uses Click the Apply button The rule is saved in the QoS policy table on the QoS Setup screen genie ADVANCED Home 63 23 24 25 26 27 28 29 30 Trek N300 Travel Router and Range Extender PR2000 To create a QoS priority rule for traffic from a specific MAC address in the Priority Category list select MAC Address QoS Priority Rules Priority QoS Policy for Priority Category MAC Address MAC Device List QoS Policy Priority Device Name MAC Address oO Pri_MAC_12133F Normal MPAVWLAN SPARE 00 1 3 02 12 13 3F MAC Address T E T l Device Name Priority Normal In the QoS Policy for field type a descriptive name for the MAC address If the device for which you want to create a QoS policy is displayed in the MAC Device List select its radio button The information from the MAC Device List populates the QoS Policy for MAC Address and Device Name fields Optional If the device does not display in the MAC Device List click the Refresh button If it still does not display you must complete these fields manually From the Priority list select the priority that this traffic should receive relative to other applications and traffic when accessing t
18. Network PA PSKANPA2 PSK HOME CA98 PA PSKANWPA2 PSK Santos IPA PSKAWPA2 PSK sugar PA2 PSK 0 0 0 090 0 0 0 o HOME670 n n n n n wPa PSK Manually input my wireless SSID 2 Help Center Security Passphrase To save a name for profile Wireless_as_WAN Show Hide Help Center 7 Make sure that the Extend my current wireless router s range check box is selected 8 Select the wireless network that you want to connect to and enter the related security information for that wireless network 9 Optional To be able to use these settings again without having to reenter them select the To save a name for profile check box 10 In the field provided enter a name for the profile 11 Click the Apply button The Trek is configured as a WiFi bridge after a two minute setup process 12 Optional Connect your wireless devices to the Trek For more information see Add Wireless Devices or Computers to Your Trek on page 29 13 Optional To use a USB device connect it to the USB port of the Trek A USB device can be a USB storage drive or a USB printer When the Trek is plugged into the wall the USB port can also be used as a cell phone charger For more information see Enhance Your Local Network on page 67 Hardware Setup 21 Get Started with NETGEAR genie Connect to the Trek This chapter explains how to use NETGEAR genie to set up your Trek a
19. Setup NETGEAR genie runs on any computer or device with a web browser It is the easiest way to set up the Trek because it automates many of the steps and verifies that those steps have been successfully completed It takes about 15 minutes to complete gt To use NETGEAR genie to set up your Trek 5 Turn on the Trek by moving the Internet via switch to one of the following positions e Wired For an Internet connection with an Ethernet cable e Wireless For a wireless Internet connection For information about the Internet via switch see Internet Mode Switch on page 9 Make sure that your Trek is cabled correctly If you want to connect to the Internet with an Ethernet cable make sure that you have connected an Ethernet cable between the Internet LAN port of the Trek and the Ethernet port of your DSL or cable modem For more information see Internet Connection at Home Setup on page 18 Make sure that your device is connected with an Ethernet cable to your Trek You can also connect your device wirelessly to your Trek For more information see Add Wireless Devices or Computers to Your Trek on page 29 Launch your Internet browser in one of the following ways e The first time you set up the Internet connection for your Trek the browser automatically goes to www routerlogin net and the NETGEAR genie screen displays e If you already used the NETGEAR genie type www routerlogin net in the address field for your browser to displa
20. TIME cicidccsbasesa sudadsdeeees wee sedeeteadasey ase 133 Wireless ConnmectiVitWindisccteasoos5 0eneanareeeei gree en awaowd E 134 Restore the Factory Settings and Password 0 00 00 135 Troubleshoot Your Network Using the Ping Utility 0 135 Test the LAN Path to Your Tek 2322s jiyeepieee eee eeseeeeasasasacs 136 Test the Path from Your Computer to a Remote Device 136 Appendix A Supplemental Information Factory SCUUNGSi vcidoacddoadude adieane tame mane ee EA ue ew EAEAN 139 Technical SpecificatiOMs s i s cdcqe see coe cae edease ae eb94 ardaeg dginaecees 140 Index Hardware Setup Get to know your Trek The Trek N300 Travel Router and Range Extender PR2000 provides you with an easy and secure way to set up a wireless local network with fast access to the Internet through a DSL or cable modem You can connect to the Internet wirelessly through an existing router or a public WiFi hotspot The Trek lets you block unsafe Internet content and applications and protects the devices computers gaming consoles and so on that you connect to your local network Note For more information about the topics covered in this manual visit the support website at support netgear com If you have not already set up your new Trek using the installation guide that comes in the box this chapter walks you through the hardware setup Chapter 2 Get Started with NETGEAR genie explains how to
21. The IP address that is assigned to the Trek Subnet Mask The subnet mask that is assigned to the Trek Default Gateway The IP address for the default gateway that the Trek communicates with DHCP Server The IP address for the Dynamic Host Configuration Protocol server that configures the TCP IP for all the computers that are connected to the Trek DNS Server The IP address of the Domain Name Service server that translates network names to IP addresses Lease Obtained The date and time when the lease was obtained Lease Expires The date and time that the lease expires Administration 99 Trek N300 Travel Router and Range Extender PR2000 Choose any of the following actions a To release the Trek s IP address and terminate the Internet connection click the Release button b To let the Trek acquire an IP address from the DHCP server and start the Internet connection click the Renew button c To close the Connection Status screen click the Close Window button PPPoE connection The following information displays for a PPPoE connection e Connection Time The time that elapsed since the connection was established e Connection Status The status of the connection Connected Disconnected Negotiation Success or Authentication Success indicates failure e IP Address The IP address that is assigned to the Trek e Subnet Mask The subnet mask that is assigned to the Trek The Connect and Discon
22. The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Administration gt Logs Current Time Thursday 19 Sep 2013 18 47 24 admin login from source 192 168 1 2 Thursday September 19 Time synchronized with NTP server time g netgear com Thursda Internet connected IP address 192 168 0 8 Internet disconnected Internet disconnected Internet disconnected Internet disconnected Internet disconnected DHCP IP 192 168 1 2 to MAC address 00 13 02 12 13 3F Internet disconnected Initialized firmware version V1 0 0 03_1 0 1 trial Include in Log Attempted access to allowed sites Y Attempted access to blocked sites and services Help Center Show Hide Help Center a The Logs screen shows the following information e Source IP The IP address of the initiating device for this log entry e Target address The name or IP address of the website or news group visited or to which access was attempted e Action The action that occurred e Date and time The date and time the log entry was recorded 6 Do any of the following Administration 102 Trek N300 Travel Router and Range Extender PR2000 e To refresh the log screen click the Refresh button e To clear the log entries click the Clear Log button e To email the log click the Send Log button gt To specify log settings
23. Trek N300 Travel Router and Range Extender PR2000 Manage the Configuration File The configuration settings of the Trek are stored within the Trek in a configuration file You can back up save this file to your computer restore it or reset it to the factory default settings Back Up Settings gt To back up the Trek s configuration settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Administration gt Backup Settings e o factory default settings 6 Click the Back Up button A screen displays asking you where you want to store your settings 7 Choose a location to store the cfg file that is on a computer on your network 8 Click the OK button A copy of the current settings is saved Restore Configuration Settings gt Torestore configuration settings that you backed up 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar Administration 104 Trek N300 Travel Router and Range Extender PR2000 The login scree
24. Wireless_as_WAN HOME CA98 11 PA PSKAWPA2 PSK Santos 1 IPA PSKIWPA2 PSK sugar 1 IPA2 PSK IHOME670 2 PA PSK 0 0 0 0 0 090 0j o Manually input my wireless SSID 2 Help Center Show Hide Help Center Make sure that the Extend my current wireless router s range check box is not selected Select the wireless network that you want to connect to and enter the related security information for that wireless network To be able to use these settings again without having to reenter them select the To save a name for profile check box In the field provided enter a name for the profile Click the Apply button The Trek is connected to the WiFi hotspot after a two minute setup process Optional Connect your wireless devices to the Trek For more information see Add Wireless Devices or Computers to Your Trek on page 29 Optional To use a USB device connect it to the USB port of the Trek A USB device can be a USB storage drive or a USB printer When the Trek is plugged into the wall the USB port can also be used as a cell phone charger For more information see Enhance Your Local Network on page 67 WiFi Range Extender Setup Use the Trek as a WiFi extender to connect your wireless devices that are outside the range of your existing WiFi router NETGEAR recommends that you connect to the WiFi network of the Trek when a wireless device is in a dead zone where the connection to your
25. Your saved profiles display on the Profile Settings screen after you click the Apply button For more information see Profile Settings on page 45 9 Under Does your Internet connection require a login select one of the following radio buttons e Yes Select the encapsulation method and enter the login name If you want to change the login time out enter a new value in minutes e No Enter the account and domain names only if needed These fields display when no login is required e Account Name If required Enter the account name provided by your ISP This might also be called the host name e Domain Name If required Enter the domain name provided by your ISP These fields display when your ISP requires a login e Internet Service Provider Select PPPoE L2TP or PPTP e Login The login name provided by your ISP This login name is often an email address e Password The password that you use to log in to your ISP e Service Name if Required If your ISP provided a service name enter it here genie BASIC Settings 35 Trek N300 Travel Router and Range Extender PR2000 Connection Mode Select Always On Dial on Demand or Manually Connect Idle Timeout In minutes If you want to change the login time out enter a new value in minutes This setting determines how long the Trek keeps the Internet connection active when there is no Internet activity from the LAN A value of 0 zero means never log out 10 Ente
26. access the Internet first determine whether the Trek can obtain an IP address from your Internet service provider ISP Unless your ISP provides a fixed IP address your Trek requests an IP address from the ISP You can determine whether the request was successful gt To check the WAN IP address 1 2 6 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select Administration gt Router Status ADVANCED Hardware Version PR2000 MAC Address 00 C0 02 1 2 35 89 Firmware Version V1 0 0 03_1 0 1_trial IP Address 192 168 0 7 wPs wizard GUI Language Version 1 0 0 3 Connection DHCPClient gt Setup LAN Port IP Subnet Mask 255 255 255 0 gt USB Storage MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 bSecurity DHCP Server on y Administration Show Statistes Connection Status Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Firmware Update Name SSID NETGEAR Region Asia gt Advanced Setup Channel 8 P 4 8 Mode Up to 300 Mbps Wireless AP On Broadcast Name Wireless isolation Help amp Support documen
27. address Use Computer MAC Address The Trek captures and uses the MAC address of the computer that you are now using You must use the one computer that the ISP allows Use This MAC Address Enter the MAC address that you want to use 11 Click the Apply button Your settings are saved 12 Click the Test button to test your Internet connection If the NETGEAR website does not display within one minute see Chapter 9 Troubleshooting Wired WAN Connection Wireless AP Mode The wireless AP mode allows this device to work as a standalone wireless access point on your existing network You can view or change basic ISP information genie BASIC Settings 36 Trek N300 Travel Router and Range Extender PR2000 Use the Setup Wizard to detect the Internet connection and automatically set up the Trek See Setup Wizard on page 48 To view or change the Internet setup 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select BASIC gt Internet Internet Setup C Enable AP Mode Save as profile Does your Internet connection require a login Oves Ono Account N
28. administrative password 27 releasing and renewing connection status 100 remote management 119 reserved IP addresses 56 58 restarting network 127 restoring default factory settings 105 135 RIP Router Information Protocol setting up 56 static routes 118 router status viewing 94 S scheduling service blocking 90 secondary DNS addresses 36 38 secured NAT 51 security 40 42 87 security options 42 security PIN 31 sending logs by email 91 services blocking 88 Session Initiation Protocol Application Layer Gateway SIP ALG 51 setting up Trek 24 48 Setup Wizard 48 49 sharing files 77 SIP ALG Session Initiation Protocol Application Layer Gateway 51 SMTP server 91 software version 95 SSID described 41 static routes 116 statistics traffic 97 system up time 97 T technical support 2 Temporal Key Integrity Protocol TKIP 42 time of day 134 trademarks 2 traffic prioritizing 61 statistics viewing 97 traffic metering 122 transmitted packets 98 troubleshooting 126 129 133 134 U Universal Plug and Play UPnP 121 up time system 97 upgrading firmware 26 106 uplink bandwidth 62 USB advanced configuration 70 drive requirements 68 file sharing 77 ReadySHARE access 68 81 remote computer connection 80 specifying approved devices 76 unmounting USB drive 68 USB devices approved 69 76 USB LED description 11 user defined services 88 V versions firmware hardware and language 95 VolP
29. and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Click the ADVANCED tab ADVANCED ADVANCED Home Y Router Information Y Internet Port Setup Wizard Hardware Version PR2000 MAC Address 00 C0 02 1 2 35 89 Firmware Version 1 0 0 03_1 0 1_trial IP Address 192 168 0 7 WPS Wizard GUI Language Version 1 0 0 3 Connection DHCPClient Setup LAN Port IP Subnet Mask 255 255 255 0 gt USB Storage MAC Address 00 C0 02 1 2 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 a gt ecurit DHCP Server on v Administration Router Status Show Statistics Connection Status Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Name SSID NETGEAR Firmware Update Region Asia gt Advanced Setup Channel 8 P 4 S Mode Up to 300 Mbps Wireless AP Broadcast Name Wireless isolation Fiato ial HBa Enter Search ltem ee 6 Collisions Up Time 100M Full 23 31 56 Link down on 300M 23 36 12 eva ers TD GTS Interval 5 secs The following information displays e System Up Time The time elapsed since the Trek was last restarted Administration 97 Trek N300 Travel Router and Range Extender PR2000 Port The statistics for the WAN Internet port the LAN Ethernet port and the wireless LAN WLAN port Status The link status of th
30. as Word documents PowerPoint presentations and text files with remote users Share Photos and Multimedia You can create your own central storage location for photos and multimedia This method eliminates the need to log in to and pay for an external photo sharing site To share photos and multimedia with your friends and family 1 Insert your USB drive into the USB port on the Trek either directly or with a USB cable Computers on your local area network LAN can automatically access this USB drive using a web browser or Microsoft Networking 2 If you want to specify read only access or to allow access from the Internet see Configure the USB Storage Device and Access Settings on page 70 Print High Quality Photos from a Nonshared Printer You can print high quality photos from a nonshared printer This scenario is for a family that does not have a print server e A family member has photos on a Macintosh computer and wants to print them e The photo capable color printer is directly attached to a Windows computer but not shared on the network e The Mac and the Windows computer are not visible to each other on the network To print high quality photos from a nonshared printer do one of the following e On the Mac access the USB drive by typing readyshare in the address field of a web browser Then copy the photos to the USB drive e Ona Window computer use a web browser or Microsoft Networking to copy the files from the
31. erste Eo Sie hice a we D EESE 53 LANS Up See ee ee nee See Se A a 54 Userthe Trek asa DHCP SerVer ca ctcsntncacedaeoesebenes eines EEE 56 Set Up Address Reservation 0 cece cece eee eee 58 Qualityof SERVICE StU sats suiectiscn varcaiideaceasnaaaress Weed Maw EEE et 60 Wi Fi Multimedia Quality of Service for Wireless Traffic 60 Quality of Service Priority Rules and Internet Access 000 61 Chapter 5 USB Port Enhance Your Local Network 23 cictnrstadeussonsarenaietetecaem sacle 67 Set Up NetWork StOrage 35 5424232c2sdeuoestduibesebasietoioksiengian 68 Connect or Safely Remove a USB Drive eee e eee eee 68 View or Contigurea USB DiiVGs ic scene ssa dade taale Hele ace ae renaiens 69 Configure the USB Storage Device and Access Settings 70 Configure the Available Network Folders 0 e eee cece eens 72 Specify Approved USB Devices 00 cece cece cent eee nes 76 Access and Share Your Network Storage eee c eee eee eee eee 77 Common Uses of Network Sharing 0 cece eee 77 Access Your USB Storage Device Locally 000 0008 79 Access Your USB Storage Device Remotely 00 00008 80 Set Upa Network Printer iso so e0 sed ncdde cee cs ga tise tp Erkas 81 Power or Rechargea USB Device seser ronnen iet nE rar aaees 86 Chapter 6 Security Port Filtering to BlOcK Ser Vices cc44cccck nern Cees dnes peeereas
32. from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Advanced Settings 111 Trek N300 Travel Router and Range Extender PR2000 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Wireless Settings ADVANCED ADVANCED Home Advanced Wireless Settings Setup Wizard Wireless Settings 2 4GHz 2 4GHz bign Y Enable Wireless Router Radio Fragmentation Length 256 2346 2346 gt Setup CTSIRTS Threshold 1 2347 2347 Preamble Mode Long Preamble x gt USB Storage gt Security Turn off wireless signal by schedule The wireless signal is scheduled to turn off during the following time period gt Administration Period Start End Recurrence Pattern 7 Advanced Setup a Add a new period Wi WPS Settings Saas gt tings 2 4GHz Router s PIN 94229882 Dynamic DNS Disable Router s PIN Static Routes VI Keep Existing Wireless Settings 2 4GHz bigin Remote Management UPnP Traffic Meter Help Center Show Hide Help Center 6 Scroll down to display the WPS settings WPS Settings Router s PIN 94229882 Disable Router s PIN Y Keep Existing Wireless S
33. it generates WPA2 PSK gets higher speed because it is implemented through hardware WPA PSK is implemented genie BASIC Settings 42 Trek N300 Travel Router and Range Extender PR2000 through software WPA2 PSK uses a passphrase to authenticate and generate the initial data encryption keys Then it dynamically varies the encryption key WPS PSK WPA2 PSK mixed mode can provide broader support for all wireless clients WPA2 PSK clients get higher speed and security and WPA PSK clients get decent speed and security For help with WPA settings on your wireless computer or device see the instructions that came with your product To change the WPA settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select BASIC gt Wireless BASIC Home Wireless Network iotemat ci Select Region cD ce Attached Devices Wireless Network 2 4GHz bigin Name SSID NETGEAR Profile Settings gt Channel 08 M Mode Up to 300 Mbps ReadySHARE J Enable SSID Broadcast Enable Wireless Isolation Security Options O None WPA2 PSK AES O
34. like this one Pinging lt IP address gt with 32 bytes of data If the path is working you see this message Reply from lt IP address gt bytes 32 time NN ms TTL xxx If the path is not working you see this message Request timed out If the path is not functioning correctly you might have one of the following problems Wrong physical connections For a wired connection make sure that your computer is connected to the correct Ethernet port on the Trek Wrong network configuration Verify that the Ethernet card driver software and TCP IP software are both installed and configured on your computer Verify that the IP address for your Trek and your computer are correct and that the addresses are on the same subnet Test the Path from Your Computer to a Remote Device After verifying that the LAN path works correctly test the path from your computer to a remote device ae 2 From the Windows toolbar select Start gt Run In the field provided type ping n 10 lt P address gt where lt IP address gt is the IP address of a remote device such as your ISP DNS server If the path is functioning correctly replies like the examples shown in Test the LAN Path to Your Trek on page 136 are displayed If you do not receive replies check the following Troubleshooting 136 Trek N300 Travel Router and Range Extender PR2000 e Check that your computer has the IP address of your Trek listed as the defa
35. of the Trek and enjoy wireless connectivity To use the Trek as a WiFi bridge 1 Connect the Trek to a power source For more information see Power nputs on page 12 Turn on power to the Trek by moving the Internet via switch from the Power Off position to the Wireless position Rotate the Trek s cover clockwise to orient the antenna For more information see Antenna Orientation on page 13 Connect your computer or wireless device to the Trek s SSID or connect your computer or wireless device to the Trek s LAN port with an Ethernet cable Optional Connect an Ethernet cable between the LAN port of the Trek and the Ethernet port of another device Open a web browser on your computer type www routerlogin net in the address field and press the Enter key If a login screen displays enter admin for your user name and password for your password The user name and password are case sensitive Then click the OK button Hardware Setup 20 Trek N300 Travel Router and Range Extender PR2000 The Wireless as WAN screen displays which shows the available wireless networks Wireless Attached Devices Profile Settings ReadySHARE Wireless as WAN Extend my current wireless router s range Available Wireless AP number 8 Status SSID Channel Signal Security Type 2NTGR125 tll PA2 PSK isquinch tll wPA2 P SK 2WIRE340 In PA PSKAWPA2 PSK amp M
36. routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt LAN Setup ADVANCED ADVANCED Home LAN Setup Setup Wizard a LAN TCPAP Setup IP Address 192 168 PR2000 y Setup 255 255 Internet Setup IP Subnet Mask Wireless Setuy RIP Direction CREE RIP Version Use Router as DHCP Server Starting IP Address 192 168 USB Storage Ending IP Address 192 168 QoS Setup Security Address Reservation IP Address Device Name MAC Address gt Administration gt Advanced Setup 7 Help Center Show ide Help Center 6 Enter the following settings e IP Address The LAN IP address of the Trek by default 192 168 168 1 genie ADVANCED Home 55 Trek N300 Travel Router and Range Extender PR2000 e IP Subnet Mask The LAN subnet mask of the Trek by default 255 255 255 0 Combined with the IP address the IP subnet mask allows a device to know which other addresses are local to it and which must be reached through a gateway or router e RIP Direction Router Information Protocol RIP enables a router to exchange routing information with other routers Th
37. secured Open QoS Setup Disable SIP ALG gt USB Storage Disable IGMP Proxying gt Security VPN Passthrough Administration IPSec Passthrough Enable O Disabled gt Advanced Setup PPTP Passthrough Enable O Disabled L2TP Passthrough Enable O Disabled Help Center ShowHide Help Center 6 Inthe MTU Size field enter a new size from 64 through 1500 7 Click the Apply button LAN Setup You can configure LAN IP services such as Dynamic Host Configuration Protocol DHCP and Routing Information Protocol RIP genie ADVANCED Home 54 Trek N300 Travel Router and Range Extender PR2000 The Trek is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server The Trek s default LAN IP configuration includes the following settings e LAN IP address 192 168 168 1 e Subnet mask 255 255 255 0 These addresses are part of the designated private address range for use in private networks and should be suitable for most applications If your network requires the use of a different IP addressing scheme make the changes in the LAN Setup screen Note If you change the LAN IP address of the Trek while connected through the browser you are disconnected You must open a new connection to the new IP address and log in again To change the LAN settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www
38. set up your Internet connection This chapter contains the following sections e Unpack Your Trek e Position Your Trek e Prepare Your Trek e Get to Know Your NETGEAR Trek e Different Ways You Can Connect to the Internet Trek N300 Travel Router and Range Extender PR2000 Unpack Your Trek Open the box and remove the Trek and installation guide Trek N3000 Travel Router and Range Extender PR2000 Figure 1 Package contents Your box contains the following items e Trek N300 Travel Router and Range Extender PR2000 e Installation guide with cabling and Trek setup instructions If any parts are incorrect missing or damaged contact your NETGEAR dealer Position Your Trek The Trek lets you access your network from virtually anywhere within the operating range of your wireless network However the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your Trek For example the thickness and number of walls the wireless signal passes through can limit the range Position your Trek according to the following guidelines e Place your Trek near the center of the area where your computers and other devices operate and within line of sight to your wireless devices e Make sure that the Trek is within reach of an AC power outlet and near Ethernet cables for wired computers e Place the Trek in an elevated location minimizing the number walls and ceilings between th
39. specify access to the USB storage device provide the following information Network Device Name The default is readyshare This name is the name used to access the USB device connected to the Trek Workgroup If you are using a Windows workgroup rather than a domain the workgroup name displays here The name works only in an operating system that supports NetBIOS such as Microsoft Windows Access Method Select the check boxes for the access methods that you want Network Neighborhood MacShare Enabled by default HTTP Enabled by default You can type readyshare routerlogin net shares to access the USB drive USB Port 71 8 Trek N300 Travel Router and Range Extender PR2000 HTTP via Internet Disabled by default If you enable this feature remote users can type http lt public IP address shares gt for example http 1 1 10 102 shares or a URL domain name to access the USB drive over the Internet This feature supports file uploading only FTP Disabled by default FTP via Internet Disabled by default If you select this check box remote users can access the USB drive through FTP over the Internet This feature supports both downloading and uploading of files If you changed the settings click the Apply button Your changes are saved Configure the Available Network Folders You can view or change the network folders on the USB storage device To view network folders 1 2 Launch you
40. the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays USB Port 68 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt ReadySHARE BASIC Home USB Storage Basic Settings Internet Basic Wireless O ReadySHARE Printer Attached Devices gt Network Device Name z z Weadyshare Profile Settings Available Network Folders ReadySHARE Sar Name Read Access Write Access Folder Name Volume Name Total Space Free Space Safely Remove USB Device 7 Help Center K 6 Click the Safely Remove USB Device button This takes the drive offline 7 Physically disconnect the USB drive View or Configure a USB Drive You can view or configure your USB storage device e View the basic information about the drive e Setup the device name workgroups and network folders e View or change the network folders e For more security share only approved USB devices gt To view basic information about the USB storage device 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter
41. the Trek memory If the Trek cannot email the log file the log buffer might fill up In this case the Trek overwrites the log and discards its contents Click the Apply button Your settings are saved Security 92 Administration Manage your network This chapter describes the Trek settings for administering and maintaining your Trek and local network The chapter includes the following sections e View Trek Status e Specify Log Settings e Manage the Configuration File e Update the Trek Firmware Some information for administering and maintaining your Trek and local network are described in separate chapters e For information about setting and recovering your password see Change the Password on page 26 and Password Recovery on page 27 e For information about the devices that are connected to your network see Attached Devices on page 44 e For information about upgrading or checking the status of your Trek over the Internet see also Remote Management on page 119 e For information about monitoring the volume of Internet traffic passing through your Trek s Internet port see Traffic Meter on page 122 93 Trek N300 Travel Router and Range Extender PR2000 View Trek Status gt To view Trek status and usage information q 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar T
42. the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays USB Port 69 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt ReadySHARE BASIC Home USB Storage Basic Settings Internet pasic Wireless gt OReadySHARE Printer Attached Devices gt Network Device Name Wreadyshare Profile Settings Available Network Folders gt ReadySHARE saan Name Read Access Write Access Folder Name Volume Name Total Space Free Space Edit Safely Remove USB Device Help Center Show Hide Help Center The screen displays a USB storage device if it is attached to the Trek USB port If you logged in to the Trek before you connected your USB device you might not see your USB device in this screen If this happens log out and then log back in To view the files and folders on the USB device click the network device name or the share name To view more detail or to change the USB device settings click the Edit button The USB Storage Advanced Settings screen displays For more information see Configure the USB Storage Device and Access Settings on page 70 Configure the USB Storage Device and Access Settings You can set up the device name workgroups and network folders for your USB device gt To view or change the USB storage advanced set
43. v100w This screen shows the approved USB devices and the available USB devices 7 In the Available USB Devices list select the drive that you want to approve 8 Click the Add button 9 Select the Allow only approved devices check box 10 Click the Apply button Your change takes effect If you want to work with another USB device first click the Safely Remove USB Device button for the currently connected USB device and physically remove the device Connect the other USB device and repeat this process For more information see Connect or Safely Remove a USB Drive on page 68 Access and Share Your Network Storage You can share files on the USB drive for a wide variety of business and recreational purposes The files can be Windows Mac or Linux file types NTFS FAT32 HFS Ext 3 Ext 4 including text Word PowerPoint Excel MP3 picture and multimedia files Common Uses of Network Sharing USB drive applications include the following e Sharing multimedia such as MP3 files pictures and other multimedia with local and remote users e Sharing resources on your network You can store files in a central location so that you do not have to power up a computer to perform local sharing In addition you can share USB Port 77 Trek N300 Travel Router and Range Extender PR2000 files between Macintosh Linux and Windows computers by using the USB drive as a go between across the systems e Sharing large files such
44. your home network For information about the genie apps see the NETGEAR genie App User Manual Retrieve wireless password Network Support About genie Retrieve wireless password About x NETGEAR Select language Wireless Network Ne Language CD enu a lt 9 uill ac atti an aa lt Dashboard Network Map Internet WiFi Connection Router Settings C l ick to Parental Controls STATUS GOOD STATUS Connected Click here view Ready SHARE AicPrin details Network Map Parental Controls ReadySHARE Number of devices 62 Click here Click here NETGEAR Experience your laptop Search NETGEAR Support screen on your TV wirelessly PTV2000 ED Support Figure 12 genie app dashboard The genie app can help you with the following e Automatically repair common wireless network problems e Have easy access to router features like Live Parental Controls guest access Internet traffic meter speed test and more The genie mobile app works on your iPhone iPad or Android phone Phone status gt roa gt 7 32 PM Log in to the router gt BE A i lt gj Information about genie mobile app Search NETGEAR _ gt and the connected support router Figure 13 genie mobile app home screen Get Started with NETGEAR genie 32 genie BASIC Settings Your Internet connection and network This chapter explains the basic features of the Trek The chapter contains t
45. 11 Select the Turn Access Control On check box 12 Click the Apply button gt To edit a wireless device or delete it from the access list 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Advanced Settings 114 Trek N300 Travel Router and Range Extender PR2000 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Wireless Settings The Advanced Wireless Settings screen displays 6 h a table select the radio button next to the wireless device that you want to edit or elete 7 Do one of the following e Click the Edit button The Edit Wireless Card screen displays a Edit the address information b Click the Accept button e Click the Delete button The address is removed from the table Dynamic DNS If your Internet service provider ISP gave you a permanently assigned IP address you can register a domain name and have that name linked with your IP address by public Domain Name Servers DNS However if your Internet account uses a dynamically assigned IP address you do not know in advance what your IP address is and the address can change frequently In this case you can
46. 3 characters or 64 hex digits Gd Help Center Appling Internet Connection Settings Optional Change the following wireless settings as needed Region The location where the Trek is used Select from the countries in the list In Asia the region is fixed to Asia and is not changeable Name SSID The SSID is also known as the wireless network name Enter a 32 character maximum name in this field This field is case sensitive The default SSID is randomly generated and NETGEAR recommends that you do not change this setting Channel The wireless channel the gateway uses Enter a value from 1 through 13 For products in the North America market only Channels 1 through 11 can be operated Do not change the channel unless you experience interference shown by lost connections or slow data transfers If this happens experiment with different channels to see which is the best When you use multiple access points it is better if adjacent access points use different radio frequency channels to reduce interference The recommended channel spacing between adjacent access points is five channels for example use Channels 1 and 6 or 6 and 11 The channel can be changed only when the Trek is operating in wired WAN mode For more information about connection modes see Internet Setup on page 34 Mode Up to 300 Mbps is the default setting which allows 802 11n and 802 11g wireless devices to join the network The other settings are Up to 5
47. 300 Travel Router and Range Extender PR2000 e Push Button recommended Click the button d WPS Clie Select a setup method Push Button recommended You can either press the physical push button on the router or click the button soft push button in this screen OPIN Number Within two minutes go to the wireless device and press its WPS button to join the network without entering a password e PIN Number Select the PIN Number radio button and enter the wireless device s security PIN in the field that displays Select a setup method Push Button recommended PIN Number This is the security PIN of the WPS client While connecting WPS enabled adapters provide a randomly generated security PIN Enter Client s PIN Within two minutes go to the wireless device and use its WPS software to join the network without entering a password For more information see the manual that came with your device The Trek attempts to add the WPS capable wireless device The WiFi LED on the Trek blinks green When the Trek establishes a WPS connection the LED is solid green and the Trek WPS screen displays a confirmation message 8 Repeat Step 7 for each wireless device that you want to connect to the Trek Get Started with NETGEAR genie 31 Trek N300 Travel Router and Range Extender PR2000 NETGEAR genie App and Mobile genie App The genie app is the easy dashboard for managing monitoring and repairing
48. 4 Mbps and Up to 145 Mbps Enable SSID Broadcast This feature allows the Trek to broadcast its SSID so wireless stations can see this wireless name SSID in their scanned network lists This check box is selected by default To turn off the SSID broadcast clear this check box Enable Wireless Isolation If this check box is selected wireless clients computers or wireless devices that join the network can use the Internet but cannot access each other or access Ethernet devices on the network genie BASIC Settings 41 Trek N300 Travel Router and Range Extender PR2000 7 Optional Change the security settings as needed For more information see Change the Wireless Security Option on page 42 8 Click the Apply button Your settings are saved If you were connected wirelessly to the router and you changed the SSID or wireless security you are disconnected from the network 9 If you changed the settings make sure that you can connect wirelessly to the network with its new settings If you cannot connect wirelessly check the following e ls your computer or wireless device connected to another wireless network in your area Some wireless devices automatically connect to the first open network without wireless security that they discover e Is your computer or wireless device trying to connect to your network with its old settings before you changed the settings If so update the wireless network selection in your c
49. 5 Wireless Setup RIP Direction WAN Setul RIP Version Use Router as DHCP Server Starting IP Address 192 168 gt USB Storage Ending IP Address 192 168 gt Security QoS Setup Address Reservation gt Administration IP Address Device Name MAC Address gt Advanced Setup Help Center Show hide Help Center 6 In the Address Reservation table select the radio button next to the address that you want to edit or delete and do one of the following e To delete a reserved address entry click the Delete button The address is removed from the table e To edit a reserved address entry click the Edit button The Address Reservation screen displays a Edit the address information b Click the Apply button Quality of Service Setup You can use Quality of Service QoS to prioritize some types of traffic ahead of others The Trek can provide QoS prioritization over the wireless link and on the Internet connection Wi Fi Multimedia Quality of Service for Wireless Traffic The Trek supports Wi Fi Multimedia Quality of Service WMM QoS to prioritize wireless voice and video traffic over the wireless link WMM QoS prioritizes wireless data packets from different applications based on four access categories voice video best effort and background For an application to receive the benefits of WMM QoS both it and the client running that application must have WMM enabled
50. 9 WiFi hotspot connection To connect to a public WiFi hotspot 1 Connect the Trek to a power source For more information see Power nputs on page 12 Turn on power to the Trek by moving the Internet via switch from the Power Off position to the Wireless position Rotate the Trek s cover clockwise to orient the antenna For more information see Antenna Orientation on page 13 Connect your computer or wireless device to the Trek s SSID or connect your computer or wireless device to the Trek s LAN port with an Ethernet cable Open a web browser on your computer type www routerlogin net in the address field and press the Enter key If a login screen displays enter admin for your user name and password for your password The user name and password are case sensitive Then click the OK button Hardware Setup 15 10 11 12 Trek N300 Travel Router and Range Extender PR2000 The Wireless as WAN screen displays which shows the available wireless networks Wireless as WAN internet x Cancel Apply gt Extend my current wireless router s range Wireless gt Available Wireless AP number 8 Security Po Status SSID Channel Security Type x Signal Attached Devices gt bwtor125 f Mill PA2 PSK Fi PA2 PSK Passphrase Profile Settings squinch ReadySHARE To save a name for profile 8 1 2WIRE340 6 PA PSKAWPA2 PSK 9 amp M Network WPA PSKIWPA2 PSK
51. Application 1500 The largest Ethernet packet size This value is the typical setting for non PPPoE non VPN connections and is the default value for NETGEAR Treks adapters and switches 1492 Used in PPPoE environments 1472 Maximum size to use for pinging Larger packets are fragmented 1468 Used in some DHCP environments 1460 Usable by AOL if you do not have large email attachments for example genie ADVANCED Home 53 Trek N300 Travel Router and Range Extender PR2000 Table 2 Common MTU sizes continued MTU Application 1436 Used in PPTP environments or with VPN 1400 Maximum size for AOL DSL 576 Typical value to connect to dial up ISPs gt To change the MTU size 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt WAN Setup ADVANCED ADVANCED Home WAN Setup D Setup Wizard Cc Disable Port Scan and DoS Protection Default DMZ Server y Setup Respond to Ping on Internet Port Internet Setup Wireless Setup MTU Size in bytes 1500 LAN Setup NAT Filtering
52. B port see Enhance Your Local Network on page 67 When the Trek is powered from a micro USB cable you cannot use the Trek s USB port as an auxiliary power source For more information about your choices of providing power to the Trek see Power Inputs on page 12 The maximum power that is supplied by the Trek s USB port is a current of 900 mA at 5 volts To find out how much current your USB device draws see the manual that came with your device USB Port 86 Security Keep unwanted content out of your network This chapter explains how to use the basic firewall features of the Trek to prevent objectionable content from reaching the computers and other devices connected to your network The chapter includes the following sections e Port Filtering to Block Services e Schedule Blocking e Security Event Email Notifications 87 Trek N300 Travel Router and Range Extender PR2000 Port Filtering to Block Services Services are functions performed by server computers at the request of client computers For example web servers serve web pages time servers serve time and date information and game hosts serve data about players moves When a computer on the Internet sends a request for service to a server computer the requested service gets identified by a service or port number This number appears as the destination port number in the transmitted IP packets For example a packet that is sent with the destination por
53. DVANCED Home 62 16 17 18 19 20 21 22 Trek N300 Travel Router and Range Extender PR2000 Your changes are saved in the table on the QoS Setup screen To add a priority rule click the Add Priority Rule button QoS Priority Rules TED Priority QoS Policy for MSN Messenger Priority Category Applications MSN Messenger Sdi iori Normal To create a QoS rule for an application or online game in the Priority Category list select either Applications or Online Gaming e Applications The Applications list lets you select existing applications but scroll down to the bottom to select Add a new application 10S Priority Rules Applications Add a new application Y Normal Specified Port Range Connection Type TCP UDP w Starting Port 1 65535 Ending Port 1 65535 e Online Gaming The Online Gaming list lets you select existing games but scroll down to the bottom to select Add a new game QoS Priority Rules Priority QoS Policy for Priority Category Online Gaming Add anew game ee ee a Normal Specified Port Range Connection Type TCP UDP Starting Port 1 65535 Ending Port 1 65535 In the QoS Policy for field type a descriptive name for the new application or game From the Priority list select the priority that this traffic should receive relative to other applications and traffic when accessing the Internet Select Highest High Normal or
54. Legacy applications that do not support WMM and applications that do not require QoS are assigned to the best effort category which receives a lower priority than voice and video WMM QoS is enabled by default genie ADVANCED Home 60 Trek N300 Travel Router and Range Extender PR2000 Quality of Service Priority Rules and Internet Access You can give prioritized Internet access to the following types of traffic e Specific applications e Specific online games e Individual Ethernet LAN ports of the Trek e A specific device by MAC address To specify prioritization of traffic you need to create a policy for the type of traffic and add the policy to the QoS Policy table in the QoS Setup screen For convenience the QoS Policy table lists many common applications and online games that can benefit from QoS handling By default QoS is disabled for Internet traffic The default QoS rules and any custom QoS rules that you created are not activated and no traffic is prioritized To set up QoS 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt QoS Setu
55. N Messenger High MSN Messenger Applications Ed Yahoo Messenger High Yahoo Messenger Applications IP Phone Highest IP Phone Applications Vonage IP Phone Highest Vonage IP Phone Applications NetMeeting High NetMeeting Applications AIM High AIM Applications Google Talk Highest Google Talk Applications CON DA ek WN Netgear EVA Highest Netgear EVA Applications SSH High SSH Applications Telnet High Telnet Applications High VPN Applications Normal FTP Applications Normal SMTP Applications Normal WWW Applications 9 9 9 0 0 0 9 0 0 0 0 0 9 9 Normal DNS Applications eMule eDonkey eMule eDonkey Applications Scroll down Kazaa Kazaa Applications Gnutella Gnutella Applications SC 2 Help Center Show Hide Help Center Add Priority Rule Help Center Show Hide Help Center All preconfigured QoS rules are displayed in a table along with their priority Highest High Normal or Low and a description 13 Select the radio button next to the QoS policy that you want to and click the Delete button WARNING If you click the Delete All button a preconfigured and custom QoS rules are deleted 14 Select the radio button next to the QoS policy that you want to edit and click the Edit button The QoS Priority Rules screen displays Edit the information you want to change 15 When you are done on the QoS Priority Rules screen click the Apply button genie A
56. NETGEAR NETGEAR Trek N300 Travel Router and Range Extender Model PR2000 User Manual h G A 4 April 2014 202 11296 02 350 East Plumeria Drive San Jose CA 95134 USA Trek N300 Travel Router and Range Extender PR2000 Support Thank you for selecting NETGEAR products After installing your device locate the serial number on the label of your product and use it to register your product at https my netgear com You must register your product before you can use NETGEAR telephone support NETGEAR recommends registering your product through the NETGEAR website For product updates and web support visit http support netgear com Phone US amp Canada only 1 888 NETGEAR Phone Other Countries Check the list of phone numbers at http support netgear com general contact default aspx Compliance For regulatory compliance information visit http www netgear com about regulatory See the regulatory compliance document before connecting the power supply Trademarks NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice NETGEAR Inc All rights reserved Contents Chapter 1 Hardware Setup Unpack Your MeKica stot ct otot atic iahaddaataetebe bari dedadedeteietad 7 Position Your TEK acscrcsrcscscnccreiaraatid ndt kE ONECART RAEE
57. PS Wi Fi Protected Setup method For best wireless connection performance rotate the Trek s cover clockwise to position its antenna properly For more information see Antenna Orientation on page 13 Manual Method gt To connect WiFi devices manually to your Trek 1 From your wireless device view the available wireless networks For more information see the manual that came with your device From the list of available wireless networks select the wireless network name SSID of the Trek The SSID is printed on the product label From your wireless device initiate a wireless connection For more information see the manual that came with your device When prompted by your wireless device enter the wireless network key password of the Trek The password is printed on the product label From the screen of your wireless device click the appropriate button to continue the connection procedure You are connected wirelessly to the Trek Repeat Step 7 through Step 5 for each wireless device that you want to connect to the Trek Get Started with NETGEAR genie 29 Trek N300 Travel Router and Range Extender PR2000 Wi Fi Protected Setup Method Wi Fi Protected Setup WPS is a standard for easily adding computers and other devices to a home network while maintaining security To use WPS make sure that all wireless devices to be connected to the network are Wi Fi certified and support WPS During the connection p
58. Per Schedule Setup Oatways USB Storage Service Table v Security Service Type Port IP Address Schedule E mail gt Administration gt Advanced Setup Help Center Show Hide Help Center 6 Select either the Per Schedule radio button or the Always radio button 7 If you selected Per Schedule specify a time period in the Schedule screen For more information see Schedule Blocking on page 90 8 Click the Add button Service Type User Defined Protocol TCP A Starting Port L 1 65535 Ending Port 1 65535 Service Type User Defined Filter Services For O Only This IP Address O IP Address Range AIl IP Addresses 9 From the Service Type list select the application or service to block The list displays several common services but you are not limited to these choices To add any additional services or applications that do not already appear select User Defined 10 If you know that the application uses either TCP or UDP select the appropriate protocol If you are not sure select TCP UDB both 11 Enter the starting and ending port numbers If the application uses a single port number enter that number in both fields 12 Select the radio button for the IP address configuration you want to block and enter the IP addresses Security 89 Trek N300 Travel Router and Range Extender PR2000 You can block the specified service for a single computer a range of computers
59. S 7 Prepare Your Tek oeririsrrereriri irik neitt bE EEEE aaa 8 Get to Know Your NETGEAR Trek sscsssscssriresecsesscssesrsssessss 9 Internet Mode Switch 0 cece cece eee ee eee eens 9 mico WEDS o4 ccneeees ese retori nsure erat ueteres hvr 10 Connection Ports and Reset Button eee eee eee eee 11 Power UM PUES setts a osc ina boii Re enthde EE E E E rE ecb 12 Antenna OnentatOncs cesera o ai enee EA E EE aM eases EA 13 Product LaDel s n05 6564 256523333 dander euadeereoeeeeeeeeeeenasasas 13 Different Ways You Can Connect to the Internet 0 0 eee 14 WiFi Connection at a Public Hotspot Setup 2c cece ee eee eee 14 WiFi Range Extender SCtups lt c cacusscconeiolieniaksaneaetesadeact ares 16 Internet Connection at Home Setup ce cece eee eee eee 18 WIFI BhidGe SUD c c c 0500 206555555 500s00Hnrpaeaeherees caeees vances 20 Chapter 2 Get Started with NETGEAR genie Trek Setup Preparation 202 2 sccs0s detec sardaciadasasanasaesesesccasse 23 Use Standard TCP IP Properties for DHCP 0c cece eee eee ee 23 Gather ISP MPOMVEIOM sons aes Scardadosaretrs exaiavevenseeh als ce iia bcs Beto aea 23 Wireless Devices and Security Settings 0c eee 23 Types of Loginsand Access cc05 c23 5 sacqcouenepeemieeseeseeone asses 23 NETGEAR genie Setup sssrrr ias snenie PARERE EREEREER EREN EE AR RS 24 Use NETGEAR genie After Installation 00 cee eee eee e
60. S Disable Router s PIN Static Routes Y Keep Existing Wireless Settings 2 4GHz bigin Remote Management USB Settings Wireless Card Access List Set Up Access List UPnP Traffic Meter a Help Center Show Hide Help Center Advanced Settings 113 Trek N300 Travel Router and Range Extender PR2000 6 Scroll down and click the Set Up Access List button 7 On the Wireless Card Access List screen click the Add button The Wireless Card Access Setup screen opens and displays a list of currently active wireless cards and their Ethernet MAC addresses Wireless Card Access Setup Available Wireless Cards Device Name MAC Address O MPAWLAN SPARE 00 13 02 12 13 3F Wireless Card Entry Device Name MAC Address 8 If the computer or device you want is in the Available Wireless Cards list select that radio button otherwise type a name and the MAC address You can usually find the MAC address on the label of the wireless device Tip You can copy and paste the MAC addresses from the Attached Devices screen into the MAC Address field of this screen To do this use each wireless computer to join the wireless network The computer then appears in the Attached Devices screen For more information about the attached devices see Attached Devices on page 44 9 Click the Add button The screen changes back to the list screen 10 Add each computer or device that you want to allow to connect wirelessly
61. Trek label Broadcast SSID Enabled Transmission speed Auto Note Maximum wireless signal rate derived from IEEE Standard 802 11 specifications Actual throughput varies Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead lower actual data throughput rate Country region United States in the US otherwise varies by region RF channel 2 4 GHz Auto Operating mode Up to 300 Mbps Data rate Best Output power Full Technical Specifications Table 4 PR2000 Trek specifications Feature Description Data and routing protocols TCP IP RIP 1 RIP 2 DHCP PPPoE PPTP Bigpond Dynamic DNS UPnP and SMB Power adapter No power adapter Input alternating current 100 240V 50 60 Hz 0 3A Dimensions 3 39 in x 3 31 in x 1 30 in 86 5 mm x 86 2 mm x 32 mm Weight 0 355 Ib 161 g excluding plug Operating temperature 0 to 40 C 32 to 104 F Operating humidity 90 maximum relative humidity noncondensing Electromagnetic emissions FCC Part 15 Class B VCCI Class B EN 55 022 CISPR 22 Class B LAN 10BASE T or 100BASE Tx RJ 45 WAN 10BASE T or 100BASE Tx RJ 45 Supplemental Information 140 Trek N300 Travel Router and Range Extender PR2000 Table 4 PR2000 Trek specifications continued Feature Description Wire
62. USB drive to the computer Then print the files You can also set up a network printer For more information see Set Up a Network Printer on page 81 Send Large Files over the Internet Sending files that are larger than 5 MB can pose a problem for many email systems The Trek allows you to share large files such as PowerPoint presentations or zip files over the Internet You can use FTP to download shared files from the Trek Sharing files with a remote colleague involves the following considerations e The two user accounts are admin and guest The password for admin is the same one that you use to access the Trek By default it is password The guest user account has no password USB Port 78 Trek N300 Travel Router and Range Extender PR2000 e On the FTP site the person receiving the files uses the guest user account and enters the password FTP requires that you type something in the password field e Be sure to select the FTP via Internet check box in the USB Storage Advanced Settings screen This option supports both downloading and uploading of files Note You can select the HTTP via Internet check box on the USB Storage Advanced Settings screen to share large files This option supports downloading files only For more information see Access Your USB Storage Device Remotely on page 80 Access Your USB Storage Device Locally When you connect the USB device to the Trek USB port it might take up to two min
63. WPA PSK TKIP WPA2 PSK AES O WPAWPA2 Enterprise Security Options WPA2 PSK Passphrase 1234567890 8 63 characters or 64 hex digits 2 Help Center Appiving Internet Connection Settings 6 Under Security Options select the WPA option that you want Security Options O None WPA2 PSK AES WPA PSK TKIP WPA2 PSK AES WPAWPA2 Enterprise Security Options WPA2 PSK Passphrase 1234567890 8 63 characters or 64 hex digits NETGEAR recommends that you do not disable security genie BASIC Settings 43 Trek N300 Travel Router and Range Extender PR2000 In the Passphrase field that displays when you select a WPA security option enter the network key password that you want to use It is a text string from 8 to 63 characters Write down the new password and keep it in a secure place for future reference Click the Apply button Your changes are saved Attached Devices You can view all computers or devices that are currently connected to your network gt To view the attached devices 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select
64. addresses are in the range of 169 254 x x If your IP address is in this range check the connection from the computer to the Trek and reboot your computer If your Trek s IP address was changed and you do not know the current IP address clear the Trek s configuration to factory defaults This sets the Trek s IP address to 192 168 168 1 For more information see Factory Settings on page 139 Make sure that your browser has Java JavaScript or ActiveX enabled If you are using Internet Explorer click the Refresh button to be sure that the Java applet is loaded Try quitting the browser and launching it again Make sure that you are using the correct login information The factory default login name is admin and the password is password Make sure that Caps Lock is off when you enter this information If you are attempting to set up your NETGEAR Trek as an additional router behind an existing router in your network consider replacing the existing router instead NETGEAR does not support such a configuration If you are attempting to set up your NETGEAR Trek as a replacement for an ADSL gateway in your network the Trek cannot perform many gateway services for example converting ADSL or cable data into Ethernet networking information NETGEAR does not support such a configuration Troubleshooting 129 Trek N300 Travel Router and Range Extender PR2000 Cannot Access the Internet If you can access your Trek but you cannot
65. ameiif Required PR2000 a Domain Name if Required Scroll to view Internet IP Address more settin gs Get Dynamically from ISP Ose Static IP Address IP Address IP Subnet Mask Gateway IP Address Domain Name Server DNS Address Get Automatically from ISP Ose These DNS Servers Help Center Show Hide Help Center genie BASIC Settings 37 6 10 11 12 13 Trek N300 Travel Router and Range Extender PR2000 Select the Enable AP Mode check box Wireless AF Wireless AP mode allows this device to work as a stand alone wireless access point on your existing network Y Enable AP Mode Save as profile Enable fixed IP settings on this device not recommended IP Address IP Subnet Mask Gateway IP Address Primary DNS Secondary DNS Please follow these instructions to have the optimal setup and performance Step1 Make sure this device s Internet port is connected with an cable to one of the LAN ports on the existing router Step2 if your existing router has wireless capability turn it off or disable it to avoid interference with this new AP device Or at least run it at a defferent wireless channel Once you are done click Apply to continue Note After you click Applythis device will change to a new IP assigned by your existing routertherefore this web page might not be available Please close and restart web browse
66. ara O Firmware Version 1 0 0 03_1 0 1_trial IP Address 192 168 0 7 GUI Language Version 1 0 0 3 Connection DHCPClient gt Setup gt USB Storage gt Security LAN Port IP Subnet Mask 255 255 255 0 MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 DHCP Server On v Administration Rater status Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Name SSID NETGEAR Firmware Update Region Asia gt Advanced Setup Channel 8 P 4 S Mode Up to 300 Mbps Wireless AP On Broadcast Name On Wireless isolation Off Help amp Support Documentation Online Support Router FAQ Nola Wed Enter Search Item Go 6 In the Internet Port pane click the Connection Status button Connection Status Cir ED IP Address Subnet Mask 192 168 0 7 255 255 255 0 Default Gateway 192 168 0 1 DHCP Server DNS Server 192 168 0 1 192 168 0 1 Lease Obtained 1 days 0 hrs 0 minutes Lease Expires 0 days 0 hrs 26 minutes Close Window The content of the Connection Status pop up screen depends on the type of connection You can start new connections and end existing connections from this screen The foll that dis owing list describes the different types of connections and the associated settings play on the Connection Status pop up screen e DHCP connection The following information displays for a DHCP connection IP Address
67. ate clockwise to open gt Indicator LEDs Figure 3 Indicator LEDs Monitor the status of your Trek using the following LEDs Table 1 Status LEDs Power LED e Green The Trek is powered on e Off The Trek is powered off Internet LED Green Either the Internet LAN port is connected physically or a wireless channel is associated successfully e Blinking green One of the following occurred The Reset button was pressed longer than five seconds A firmware upgrade is in progress The bandwidth limit was exceeded e Off The Trek is not connected in either wired or wireless mode Hardware Setup 10 Trek N300 Travel Router and Range Extender PR2000 Table 1 Status LEDs continued WiFi LED e Green Either the LAN port or a wireless device is connected to the Trek e Off No device is connected USB LED e Green The USB drive is properly mounted O USB e Off No USB drive is detected Connection Ports and Reset Button Connect or reset your Trek WWAW O button Connection ports Figure 4 Connection ports and Reset button Connect or reset your Trek using the following items Reset button To reset the Trek to its factory settings insert a paper clip into the Reset hole and hold it until the Internet LED blinks See Factory Settings on page 139 for information about restoring factory settings Internet LAN port When the Internet via switch i
68. bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Advanced Settings 122 10 Trek N300 Travel Router and Range Extender PR2000 Click ADVANCED gt Advanced Setup gt Traffic Meter Internet Traffic Meter C Enable Trafic Meter Traffic volume control by Monthly limit Mbytes Round up data volume for each connection by Mbytes Connection time control Monthly limit Hours Traffic Counter Scroll to view Restarttrafic counter at oo day of each month more settings Restart Counter Now Traffic Control Pop up a warming message Mbytes Minutes before the monthly limit is reached When the monthly limit is reached Turn the Internet LED to flashing green amber Disconnect and disable the Internet connection Internet Traffic Statistics Start Date Time Wednesday 31 Dec 1969 03 59 PM Current Date Time Wednesday 31 Dec 1969 04 01 PM Traffic Volume Left 0 Bytes Connection Time Traffic Volume Mbytes hier Upload Avg Download Avg TotaliAvg Tod 2 Help Center Select the Enable Traffic Meter check box Optional Control the volume of Internet traffic You can use either the traffic volume control feature or the connection time control feature to accomplish this goal e Select the Traffic volume control by radio button a
69. ble If it is a message is displayed on the top of the screen For more information about upgrading firmware see Update the Trek Firmware on page 106 Click the message when it displays and click the Yes button to upgrade the Trek with the latest firmware After the upgrade the Trek restarts A CAUTION Do not try to go online turn off the Trek shut down the computer or do anything else to the Trek until the Trek finishes restarting and the Power LED has stopped blinking for several seconds Change the Password The default password that you use to log in to the Trek is password NETGEAR recommends that you change this default password to a secure password Changing the default password is not the same as changing the password for wireless access The label on your Trek shows your unique wireless network name SSID and the Get Started with NETGEAR genie 26 Trek N300 Travel Router and Range Extender PR2000 passphrase also referred to as the wireless network password or network key for wireless access see Product Label on page 13 gt To change the default password that you use to log in to the Trek 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and pass
70. ce name user name or password Or your ISP might have a provisioning problem Note Unless you connect manually the Trek does not authenticate using PPPoE until data is transmitted to the network Troubleshoot Internet Browsing If your Trek can obtain an IP address but your computer cannot load any web pages from the Internet check the following e Your computer might not recognize any DNS server addresses A DNS server is a host on the Internet that translates Internet names such as www addresses to numeric IP addresses Troubleshooting 132 Trek N300 Travel Router and Range Extender PR2000 Typically your ISP provides the addresses of one or two DNS servers for your use If you entered a DNS address during the Trek s configuration restart your computer Alternatively you can configure your computer manually with a DNS address as explained in the documentation for your computer Your computer might not have the Trek configured as its default gateway Reboot the computer and verify that the Trek address www routerlogin net is listed by your computer as the default gateway address You might be running login software that is no longer needed If your ISP provided a program to log you in to the Internet such as WinPoET you no longer need to run that software after installing your Trek You might need to go to Internet Explorer and select Tools gt Internet Options click the Connections tab and select the Never d
71. ce the MTU This change is rarely required Do not make this change unless you are sure that it is necessary for your ISP connection For more information see Change the MTU Size on page 53 NAT Filtering Network Address Translation NAT determines how the Trek processes inbound traffic Secured NAT provides a secured firewall to protect the computers on the LAN from attacks from the Internet but might prevent some Internet games point to point applications or multimedia applications from functioning By default the Secured radio button is selected Open NAT provides a much less secured firewall but allows almost all Internet applications to function Disable SIP ALG Some Voice over IP VoIP applications do not function well with the Session Initiation Protocol SIP Application Layer Gateway ALG Selecting the check box to turn off the SIP ALG might enable connected VoIP devices to create and accept a VoIP call through the Trek By default this check box is cleared Disable IGMP Proxying IGMP proxying allows computers on the LAN to receive the multicast traffic they are subscribed to from the Internet By default this check box is selected and the IGMP proxy is disabled preventing multicast traffic from the Internet to the LAN Clear the Disable IGMP Proxying check box to allow multicast traffic from the Internet to the LAN VPN Passthrough The Trek supports VPN passthrough for IPSec PPTP and L2TP IPSec Passthroug
72. ce your local network This chapter describes how to use the USB port on your Trek to enhance your local network This chapter contains the following sections Enhance Your Local Network Set Up Network Storage Access and Share Your Network Storage Set Up a Network Printer Power or Recharge a USB Device 66 Trek N300 Travel Router and Range Extender PR2000 Enhance Your Local Network Find the USB port on your Trek 4 0 p auan ana OD DEAL Figure 14 USB port You can use the USB port for any of the following applications in the following ways e Network storage Back up the files on your computers and digital devices to a network drive For more information see Set Up Network Storage on page 68 e ReadySHARE Access Share the files on your network drive with local and remote computers and digital devices For more information see Access and Share Your Network Storage on page 77 e ReadySHARE Printer Send the files on your computers and digital devices to a network printer For more information see Set Up a Network Printer on page 81 e Auxiliary power outlet Power or recharge a USB device For more information see Power or Recharge a USB Device on page 86 The USB port on the Trek can connect only USB devices such as flash drives or USB hard drives USB printers and USB power compatible devices Do not connect computers USB modems USB hubs CD drives or DVD drives to the Trek s USB port
73. ct connection set it to 1 Click the Apply button The route is added to the table on the Static Routes screen To edit or delete a static route 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Advanced Settings 118 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Advanced Setup gt Static Routes Static Routes Destination Gateway CD CHD 6 In the table select the radio button next to the route that you want to edit or delete and do one of the following e To edit the route click the Edit button Static Routes CID ENED Route Name C Private Mactive Destination IP Address IP Subnet Mask Gateway IP Address Metric a Edit the route information b Click the Apply button e To delete the route click the Delete button The route is removed from the table Remote Management The remote management feature lets you access your Trek over the Internet to view or change its settings Note Before you enable remote management be sure to change the Trek s
74. cts between the Trek and your computer Restore the Factory Settings and Password To restore the factory settings erasing the current configuration and changing the Trek s administration password back to password you can do either of the following e Use the Erase function of the Trek see Erase the Current Configuration Settings on page 105 e Use the Reset button See Factory Settings on page 139 If you restore the factory settings and the Trek fails to restart or the green Power LED continues to blink the unit might be defective If the error persists you might have a hardware problem Contact technical support at www netgear com support Troubleshoot Your Network Using the Ping Utility Most network devices and routers contain a ping utility that sends an echo request packet to the designated device The device then responds with an echo reply You can easily troubleshoot a network by using the ping utility in your computer or workstation Troubleshooting 135 Trek N300 Travel Router and Range Extender PR2000 Test the LAN Path to Your Trek You can ping the Trek from your computer to verify that the LAN path to your Trek is set up correctly To ping the Trek from a running Windows computer 1 2 From the Windows toolbar select Start gt Run In the field provided type ping followed by the IP address of the Trek as in this example ping www routerlogin net Click the OK button You should see a message
75. d is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Click the ADVANCED tab gt USB Storage gt Security ADVANCED ADVANCED Home F Router Information Y Internet Port amp Setup Wizard Hardware Version PR2000 MAC Address 00 C0 02 1 2 35 89 wPs wizara o Firmware Version 1 0 0 03_1 0 1_trial IP Address 192 168 0 7 GUI Language Version 1 0 0 3 Connection DHCPClient gt Setup LAN Port IP Subnet Mask 255 255 255 0 MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 DHCP Server On v Administration Bouter St Show Statistics Connection Status Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Firmware Update Name SSID NETGEAR Region Asia gt Advanced Setup Channel 8 P 4 S Mode Up to 300 Mbps Wireless AP On Broadcast Name On Wireless isolation Off Help amp Support Documentation Online Support Router FAQ SFO Meg Enter Search Item ee The following information displays Name SSID The wireless network name SSID that the Trek uses Region The geographic region where the Trek is used It might be illegal to use the wireless features of the Trek in some parts of the world Channel The operating channel of the wireless port The default channel is Auto When Auto is selected the Trek finds the best operating channel available Mode The wireless communicat
76. default login password to a secure password The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters numbers and symbols It can be up to 30 characters For more information see Change the Password on page 26 and Password Recovery on page 27 gt To set up remote management 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Advanced Settings 119 Trek N300 Travel Router and Range Extender PR2000 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Advanced Setup gt Remote Management Remote Management C Turn Remote Management On Remote Management Address httosv 0 0 0 0 8443 Allow Remote Access By only This Computer OIP Address Range Everyone Port Number Select the Turn Remote Management On check box Under Allow Remote Access By specify the external IP addresses to be allowed to access the Trek s remote management Note For enhanced security restrict access to as few external IP addresses as practical Select one of the following radio buttons e To allow access from a single IP address on the Internet sel
77. e LAN Port MAC Address The Media Access Control address for the LAN port This address is the unique physical address that the Ethernet LAN port of the Trek uses IP Address The IP address that the Ethernet LAN port of the Trek uses The default is 192 168 168 1 DHCP Server Identifies whether the Trek s built in DHCP server is active for the LAN attached devices Internet Port Pane gt To display the Internet Port pane 1 Launch your browser from a computer or wireless device that is connected to the Trek Administration 95 Trek N300 Travel Router and Range Extender PR2000 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Click the ADVANCED tab ADVANCED Hardware Version PR2000 MAC Address 00 C0 02 1 2 35 89 Firmware Version 1 0 0 03_1 0 1_trial IP Address 192 168 0 7 Ci GUI Language Version 1 0 0 3 Connection DHCPClient gt Setup LAN Port IP Subnet Mask 255 255 255 0 gt USB Storage MAC Address 00 C0 02 1 2 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 Security DHCP Server on y Administration Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Firmware Update Name SSID
78. e E Attached Devices _pntori2s aati peres Passphrase lsquinch ffl Wwea2 psK Profile Settings To save a name for profile ReadySHARE 2WIRE340 PA PSKAWPA2 PSK f amp M Network WPA PSKIWPA2 PSK Wireless_as_WWAN IHOME CA98 PA PSKIWPA2 PSK Santos PA PSKIWPA2 PSK sugar IPA2 PSK IHOME670 PA PSK 0 0 0 0 0 0 0 o Manually input my wireless SSID Help Center u ShowHicde Help Center Make sure that the Extend my current wireless router s range check box is selected Hardware Setup 17 10 11 12 13 Trek N300 Travel Router and Range Extender PR2000 Select the wireless network that you want to connect to and enter the related security information for that wireless network To be able to use these settings again without having to reenter them select the To save a name for profile check box In the field provided enter a name for the profile Click the Apply button The Trek is configured as a WiFi extender after a two minute setup process Optional Connect your wireless devices to the Trek For more information see Add Wireless Devices or Computers to Your Trek on page 29 Optional To use a USB device connect it to the USB port of the Trek A USB device can be a USB storage drive or a USB printer When the Trek is plugged into the wall the USB port can also be used as a cell phone charger For more information s
79. e port TxPkts The number of packets transmitted on this port since reset or manual clear RxPkts The number of packets received on this port since reset or manual clear Collisions The number of collisions on this port since reset or manual clear Up Time The time elapsed since this port acquired the link Poll Interval The interval at which the statistics are updated on this screen 7 To change the polling frequency enter a time in seconds in the Poll Interval field and click the Set Interval button 8 To stop the polling entirely click the Stop button Connection Status The content of this screen depends on the type of connection For example different information is shown for a PPPoE connection than for a DHCP connection gt To view and manage the connection status 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays Administration 98 Trek N300 Travel Router and Range Extender PR2000 5 Click the ADVANCED tab ADVANCED ADVANCED Home F Router Information Y Internet Port a Setup Wizard Hardware Version PR2000 MAC Address 00 C0 02 1 2 35 89 wPs wiz
80. e router and your other devices Hardware Setup 7 Trek N300 Travel Router and Range Extender PR2000 e Place the Trek away from electrical devices such as these Ceiling fans Home security systems Microwaves Computers Base of a cordless phone 2 4 GHz cordless phone e Place the Trek away from large metal surfaces large glass surfaces insulated walls and other surfaces such as these Solid metal door Aluminum studs Fish tanks Mirrors Brick Concrete Prepare Your Trek gt To prepare your Trek for installation 1 Carefully peel off the protective film covering the end of your Trek 2 Place your Trek in an area suitable for installation near a power outlet and accessible to the Ethernet cables for your wired computers For more information about your choices of providing power to the Trek see Power Inputs on page 12 Hardware Setup 8 Trek N300 Travel Router and Range Extender PR2000 Get to Know Your NETGEAR Trek Locate the hardware features on your Trek Internet Mode Switch Select your Internet mode Figure 2 Internet via switch Put the switch in one of the following positions e Wired Connect to the Internet with an Ethernet cable e Power Off Turn off the Trek e Wireless Connect to the Internet with a wireless link Hardware Setup 9 Trek N300 Travel Router and Range Extender PR2000 Indicator LEDs Monitor the status of your Trek ra Cover rot
81. ect the Only This Computer radio button Enter the IP address that will be allowed access e To allow access from a range of IP addresses on the Internet select the IP Address Range radio button Enter a beginning and ending IP address to define the allowed range e To allow access from any IP address on the Internet select the Everyone radio button Specify the port number for accessing the web management interface Normal web browser access uses the standard HTTP service port 80 For greater security enter a custom port number for the remote web management interface Choose a number from 1024 to 65535 but do not use the number of any common service port The default is 8080 which is a common alternate for HTTP Click the Apply button Your changes take effect When you access your Trek from the Internet type your Trek s WAN IP address into your browser s address or location field followed by a colon and the custom port number Advanced Settings 120 Trek N300 Travel Router and Range Extender PR2000 For example if your external address is 134 177 0 123 and you use port number 8080 enter 134 177 0 123 8080 in your browser Universal Plug and Play Universal Plug and Play UPnP helps devices such as Internet appliances and computers access the network and connect to other devices as needed UPnP devices can automatically discover the services from other registered UPnP devices on the network If you use app
82. ected to the Trek You can use NETGEAR genie again to view or change settings for the Trek gt To view or change the settings for the Trek 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays User name Password SEK C Remember my password 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Note The Trek user name and password are different from the user name and password for logging in to your Internet connection For more information see Types of Logins and Access on page 23 4 Click the OK button Get Started with NETGEAR genie 25 Trek N300 Travel Router and Range Extender PR2000 5 The BASIC Home screen displays Logout Router Firmware Version 1 0 0 03_1 0 1_trial Auto I v Internet Wireless Attached Devices 2 Internet Wireless Profile Settings Name SSID ReadySHARE gt Eirenis Password os Attached Devices ReadySHARE Number of devices 1 Status NO USB DRIVE Help amp Support Documentation Online Support Router FAQ Filio aial Ma Enter Search Item co Upgrade the Trek Firmware When you set up your Trek and are connected to the Internet the Trek automatically checks for you to see if newer firmware is availa
83. ed them gt To view or delete the saved profile settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays genie BASIC Settings 45 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt Profile Settings BASIC Home Profile Settings Internet Currently Applied profile Name Wired_as_WAN Attached Devices gt Mode Router Profile Settings i Profile List ReadySHARE gt Profile Name pa N 1 Wireless Wired_as_WAN Router 2 Wireless_as_WAN Wireless WAN x Delete Profile Help Center Show Hide Help Center Your saved Internet connection profiles are displayed 6 To delete a profile select the radio button that is next to the profile that you want to delete and click the Delete Profile button The profile is deleted 7 Repeat Step 6 for each profile that you want to delete genie BASIC Settings 46 genie ADVANCED Home Specify custom settings This chapter explains the advanced features of the Trek The chapter contains the following sections e Setup Wizard e WAN Setup e LAN Setup e Quality of Serv
84. edentials check box a Type the user name and password that you want to use b Click the OK button 6 Click the Finish button The USB drive is mapped to the drive letter that you specified Access Your USB Storage Device Remotely When you connect the USB device to the Trek USB port it might take up to two minutes before it is ready for sharing You can access your USB storage device remotely gt To access the USB drive from a remote computer 1 Launch a web browser 2 Connect using the Trek s Internet port IP address If you are using Dynamic DNS you can type the DNS name rather than the IP address You can view the Trek s Internet IP address on the BASIC Home screen see nternet Setup on page 34 To use remote FTP access make sure that the FTP check box is selected in the Access Method section of the USB Storage Advanced Settings screen For more information see Configure the USB Storage Device and Access Settings on page 70 gt To access the USB drive with FTP from a remote computer 1 Launch a web browser 2 Type ftp and the Internet port IP address in the address field of the browser For example type ftp 10 1 65 4 USB Port 80 Trek N300 Travel Router and Range Extender PR2000 If you are using Dynamic DNS you can type the DNS name rather than the IP address 3 Type the account name and password for the account that has access rights to the USB drive The user name account name for All
85. ee 25 Upgrade the Trek FIKMWaresccocc nvarardntaridrmeded owed et auewew anaes 26 Change the Passworde seeriat ciciutasbiadeueeweanseoibetetetatetasnts 26 Password RECOVErY c ccs056s oos555 855 riad E kai EER roee oes cases 27 Add Wireless Devices or Computers to Your Trek 0 e cere eee 29 Manual MEthOd cigccsta nas daa acon tioun tahane PONE RES RPA oDS ERASE 29 Wi Fi Protected Setup Method 0 cece cece eee eee 30 NETGEAR genie App and Mobile genie App 0c cece eee eee eee 32 Chapter 3 genie BASIC Settings ternet SEUD s 2 00 55 0 6 555 oc5u ntndeicngenrianidedoutuess asiegewegse es 34 Wired WAN Connection Router Mode 00sec cece eens 34 Wired WAN Connection Wireless AP Mode 0c cece cease 36 Wireless WAN Connection WiFi Mode 0 0 cee cece een ees 39 Basic Wireless Settings essere trots ies casadasetubenseesbededusee uted 40 Trek N300 Travel Router and Range Extender PR2000 Change the Wireless Security Option 0 e eee eee eee 42 Attached DOVES erpe esere V nsere eSEE E S dbs dam Sane ane 44 Profile Settings sccccecscasederovrbonwedtareviveriwerasstedeess ages 45 Chapter 4 genie ADVANCED Home Setup Wizard oa wears 44454454 aa RN AEOETPEE ES YOON PENSE SS E RSE 48 WAN SEND e ne optsccaceesateanctaiesqeoueiedee neh ccheseeeuunoeens 50 Default DMZ Semel ic wiaccuc sce cs anent nna E nes Gawe aug aeawe EE 51 Change the MTU SIZ ois oo sia da dana
86. ee Enhance Your Local Network on page 67 Internet Connection at Home Setup Connect to the Internet with an Ethernet cable DSL or cable modem Optional Connect a USB device to the USB port Figure 10 Wired WAN connection gt To connect to the Internet with an Ethernet cable di 2 Connect an Ethernet cable between the Internet LAN port of the Trek and the Ethernet port of your DSL or cable modem Connect the Trek to a power source For more information see Power nputs on page 12 Turn on power to the Trek by moving the Internet via switch from the Power Off position to the Wired position Hardware Setup 18 Trek N300 Travel Router and Range Extender PR2000 4 Connect your computer or wireless device to the Trek s SSID or connect your computer or wireless device to the Trek s LAN port with an Ethernet cable 5 Open a web browser on your computer type www routerlogin net in the address field and press the Enter key If a login screen displays enter admin for your user name and password for your password The user name and password are case sensitive Then click the OK button The Setup Wizard screen displays Setup Wizard The Smart Setup Wizard can detect the type of Internet connection that you have Do you want the Smart Setup Wizard to try and detect the connection type now Yes wo I want to configure the router myself 6 Click the Next button and follow the prompts of t
87. ee Setup Wizard on page 48 gt To view or change the Internet setup 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays genie BASIC Settings 34 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt Internet Internet Setup Enable AP Mode Save as profile Does your Internet connection require a login Oves Ono Account Name if Required Domain Name if Required i Scroll to view Internet IP Address more settings Get Dynamically from ISP Ouse Static IP Address IP Address IP Subnet Mask Gateway IP Address Domain Name Server DNS Address Get Automatically from ISP O Use These DNS Servers Help Center 6 Clear the Enable AP Mode check box The fields that display in the Internet Setup screen depend on whether your Internet connection requires a login 7 Select the Save as profile check box If you want to use your Trek in more than one type of Internet connection a saved profile lets you make connections more quickly 8 In the field provided enter a name for the profile
88. ek The Trek assigns IP addresses to the attached computers from a pool of addresses specified in this screen Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN For most applications the default DHCP and TCP IP settings of the Trek are satisfactory You can specify the pool of IP addresses for assignment by setting the starting IP address and ending IP address These addresses must be part of the same IP address subnet as the Trek s LAN IP address Using the default addressing scheme define a range between 192 168 168 2 and 192 168 168 200 although you might want to save part of the range for devices with fixed addresses The Trek delivers the following parameters to any LAN device that requests DHCP e An IP address from the range that you defined genie ADVANCED Home 56 Trek N300 Travel Router and Range Extender PR2000 Subnet mask Gateway IP address the Trek s LAN IP address DNS server address You can use another device on your network as the DHCP server or you can manually configure the network settings of all of your computers and devices To disable the DHCP server feature 1 2 6 T Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is passwo
89. eless Settings on page 109 If you disabled the Trek s SSID broadcast your wireless network is hidden and does not show up in your wireless client s scanning list By default SSID broadcast is enabled Does your wireless device support the security that you are using for your wireless network For example does your wireless device support WPA2 security Troubleshooting 134 Trek N300 Travel Router and Range Extender PR2000 If not then you must change the security of the Trek to match the security that is supported by your wireless device For more information see Basic Wireless Settings on page 40 WARNING NETGEAR recommends that you use the WPA2 wireless security option Do not disable wireless security If your wireless device does not support WPA2 security you might want to consider upgrading your wireless device to a newer model e Ifyou want to view the wireless settings for the Trek use an Ethernet cable to connect a computer to a LAN port on the Trek Then log in to the Trek and select BASIC gt Wireless See Basic Wireless Settings on page 40 Note Be sure to click the Apply button if you make changes If your wireless device finds your network but the signal strength is weak check these conditions e Is your Trek too far from your computer or too close Place your computer near the Trek but at least 6 feet away and see whether the signal strength improves e ls your wireless signal blocked by obje
90. elp Center an Showlide Help Center 7 In the IP Address field type the IP address to assign to the computer or server Choose an IP address from the Trek s LAN subnet such as 192 168 168 x where x is between 2 and 200 8 Type the MAC address of the computer or server Tip If the computer is already on your network you can copy its MAC address from the Attached Devices screen and paste it here 9 Click the Apply button The reserved address is entered in the table The reserved address is not assigned until the next time the computer contacts the Trek s DHCP server Reboot the computer or access its IP configuration and force a DHCP release and renew gt To edit or delete a reserved address entry 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays genie ADVANCED Home 59 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Setup gt LAN Setup ADVANCED ADVANCED Home LAN Setup Setup Wizard ss SN wes wizara Device Name PR2o00 OOOO LAN TCPAP Setup zAetuR IP Address 192 168 Internet Setup IP Subnet Mask 255 25
91. ernet gt Setup gt USB Storage 7 Locate and select the upgrade file on your hard disk Security Browse No file selected v Administration Cancel Router Status Logs Attached Devices Backup Settings Set Password Firmware te gt Advanced Setup Help Center gt ShowHide Help Center 6 Click the Check button If new firmware is available the Trek detects it and displays the Firmware Update Assistant screen 7 To update the Trek to the new firmware click the Yes button 8 If you have manually downloaded new firmware from the NETGEAR support website do the following a Click Browse navigate to the firmware file the file ends in img and select the firmware file b Click the Upload button A progress bar shows the progress of the firmware upload process Note It will take about 3 minutes for firmware upgrade Please dont turn off the power or press reset button III A WARNING When uploading firmware to the Trek do not interrupt the web browser by closing the window clicking a link or loading a new page If the browser is interrupted the firmware might be corrupted When the upload is complete your Trek restarts The upload process can take up to three minutes and the upgrade process typically takes about one minute To determine whether you need to reconfigure the Trek after upgrading read the new firmware release notes Administration 107 Advanced Settings
92. ettings 2 4GHz bigin The Router s PIN field displays the PIN that you use on a registrar for example from Network Explorer on a Vista Windows computer to configure the Trek s wireless settings through WPS 7 Optional Select or clear the Disable Router s PIN check box The PIN function might temporarily be disabled when the Trek detects suspicious attempts to break into the Trek s wireless settings by using the Trek s PIN through WPS You can manually enable the PIN function by clearing the Disable Router s PIN check box 8 Optional Select or clear the Keep Existing Wireless Settings check box By default the Keep Existing Wireless Settings check box is selected NETGEAR recommends that you leave this check box selected If you clear this check box the next time a new wireless client uses WPS to connect to the Trek the Trek wireless settings change to an automatically generated random SSID and security key 9 Click the Apply button Advanced Settings 112 Trek N300 Travel Router and Range Extender PR2000 Your changes are saved Set Up a Wireless Access List by MAC Address You can set up a list of computers and wireless devices that are allowed to join the wireless network This list is based on the unique MAC address of each computer and device Each network device has a MAC address which is a unique 12 character physical address containing the hexadecimal characters 0 9 a
93. existing WiFi router is poor or nonexistent Hardware Setup 16 Trek N300 Travel Router and Range Extender PR2000 gt To use the Trek as a WiFi range extender 1 7 Place the Trek at an equal distance between your existing WiFi router and the wireless device that is located in the dead zone of your router When possible have your Trek in the same room with your existing router when you specify the settings of the Trek Connect the Trek to a power source For more information see Power Inputs on page 12 Turn on power to the Trek by moving the Internet via switch from the Power Off position to the Wireless position Rotate the Trek s cover clockwise to orient the antenna For more information see Antenna Orientation on page 13 Connect your computer or wireless device to the Trek s SSID or connect your computer or wireless device to the Trek s LAN port with an Ethernet cable Open a web browser on your computer type www routerlogin net in the address field and press the Enter key If a login screen displays enter admin for your user name and password for your password The user name and password are case sensitive Then click the OK button The Wireless as WAN screen displays which shows the available wireless networks Wireless as WAN Y Extend my current wireless router s range Wireless gt ii p Available Wireless AP number 8 Security WPAZPSK y Status SSID Channel Signal Security Typ
94. f or A F only and separated by colons for example 00 09 AB CD EF 01 Typically the MAC address is on the label of the wireless card or network interface device If you do not have access to the label you can display the MAC address using the network configuration utilities of the computer You might also find the MAC addresses in the Attached Devices screen To restrict access based on MAC addresses 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Wireless Settings ADVANCED ADVANCED Home Advanced Wireless Settings Wireless Settings 2 4GHz 2 4GHz b g n Y Enable Wireless Router Radio ragmentation Length 256 2346 2346 TSIRTS Threshold 1 2347 2347 Preamble Mode Long Preamble gt Security Turn off wireless signal by schedule The wireless signal is scheduled to turn off during the following time period gt Administration Period Start End Recurrence Pattern Setup Wizard gt Setup gt USB Storage Advanced Setup i Add a new period WPS Settings Router s PIN 94229882 Dynamic DN
95. fter you complete cabling as described in the installation guide The chapter contains the following sections Trek Setup Preparation Types of Logins and Access NETGEAR genie Setup Use NETGEAR genie After Installation Upgrade the Trek Firmware Change the Password Password Recovery Add Wireless Devices or Computers to Your Trek NETGEAR genie App and Mobile genie App 22 Trek N300 Travel Router and Range Extender PR2000 Trek Setup Preparation You can set up your Trek with the NETGEAR genie automatically or you can use the genie menus and screens to set up your Trek manually However before you start the setup process you need to have your ISP information on hand and make sure the laptops computers and other devices in the network have the required settings Use Standard TCP IP Properties for DHCP If you set up your computer to use a static IP address you must change the settings so that it uses Dynamic Host Configuration Protocol DHCP Gather ISP Information For DSL broadband service when your Internet service starts your Internet service provider ISP typically gives you all of the information needed to connect to the Internet You might need this information to set up the Trek to use your Internet service If you cannot locate this information ask your ISP to provide it When your Internet connection is working you no longer need to launch the ISP login program on your computer to access the Internet When
96. ftware for the USB printer must be installed on each computer from which you want to control this USB printer The ReadySHARE Printer utility has both a Mac version and a Windows version The ReadySHARE Printer utility setup file and instructions are available at www netgear com readyshare After you install the ReadySHARE Printer utility it displays on your computer as the NETGEAR USB Control Center gt To set up ReadySHARE Printer 1 Using a USB printer cable connect a USB printer to the Trek s USB port For information about how to locate the USB port see Enhance Your Local Network on page 67 USB Port 81 2 Trek N300 Travel Router and Range Extender PR2000 Install the USB printer driver software on each computer that shares the printer If you do not have the printer driver contact the printer manufacturer On each computer that shares the printer download the NETGEAR USB Control Center utility The NETGEAR USB utility has a Mac version and a Windows version which you can access in two different ways e From the ReadySHARE Printer area of the page you access from www netgear com readyshare Ready SHARE Printer f Wirelessly print from your home network to a connected USB printer Easy to Set up Instructions PC Utility MAC Utility Supported Routers e From the ReadySHARE section of the desktop NETGEAR genie For more information see NETGEAR genie App and Mobile genie App on page 32 No
97. gn Mi Enable Wireless Router Radio ragmentation Length 256 2346 2346 CTSIRTS Threshold 1 2347 2347 Preamble Mode Long Preamble gt Setup gt USB Storage gt Security Turn off wireless signal by schedule The wireless signal is scheduled to turn off during the following time period gt Administration Period Start End Recurrence Pattern v Advanced Setup i Add a new period Wireless WPS Settings Setti 2 4GH Router s PIN 94229882 Dynamic DNS Disable Router s PIN Static Routes YI Keep Existing Wireless Settings 2 4GHz bigin Remote Management UPnP Traffic Meter Help Center ShowHide Help Center 6 Select the Turn off wireless signal by schedule check box The Turn off wireless signal by schedule check box can be selected only when the Trek is operating in wired WAN mode 7 Click the Add a new period button When to turn off wireless signal Apply gt When to turn off wireless signal Start 00 00 J End 00 00 Recurrence Pattern Daily O Select Days Sunday Monday Tuesday Wednesday Thursday Friday Saturday 8 Use the lists radio buttons and check boxes to set up a period during which you want to turn off the wireless signal 9 Click the Apply button The Advanced Wireless Settings screen displays 10 Click the Apply button Your changes are saved View or Change WPS Settings gt To specify WPS settings 1 Launch your browser
98. h To enable or disable IPSec passthrough select the Enable or Disabled radio button PPTP Passthrough To enable or disable PPTP passthrough select the Enable or Disabled radio button L2TP Passthrough To enable or disable L2TP passthrough select the Enable or Disabled radio button 7 Click the Apply button Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation NAT The Trek is programmed to recognize some of these applications and to work correctly with them but other applications might not function well In some cases one local computer can run the application correctly if that computer s IP address is entered as the default DMZ server genie ADVANCED Home 51 Trek N300 Travel Router and Range Extender PR2000 A WARNING DMZ servers pose a security risk A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet If compromised the DMZ server computer can be used to attack other computers on your network The Trek discards incoming traffic from the Internet unless the traffic is a response to one of your local computers Instead of discarding this traffic you can forward it to one computer on your network This computer is called the default DMZ server To set up a default DMZ server 1 Launch yo
99. hat is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt LAN Setup ADVANCED ADVANCED Home LAN Setup Setup Wizard Cc Device Name LAN TCPAP Setup y Setup IP Address 192 fi6e 2 __ 2 2ss zss 2ss o PR2000 Internet Setup IP Subnet Mask Wireless Setup RIP Direction Both w WAN Setup RIP version Disabled v LAN Setup QoS Setup Use Router as DHCP Server Starting IP Address gt USB Storage Ending IP Address mecurity Address Reservation IP Address Device Name MAC Address gt Administration gt Advanced Setup Help Center Show Hide Help Center genie ADVANCED Home 58 Trek N300 Travel Router and Range Extender PR2000 6 In the Address Reservation section click the Add button ADVANCED ADVANCED Home Address Reservation D GIES Setup Wizard Address Reservation Table oO 0 192 168 1 2 MPAWLAN SPARE 00 13 02 12 13 3F IP Address 192 168 1 MAC Address y Setup Internet Setup Wireless Setup WAN Setup Device Name LAN Setup QoS Setup gt USB Storage gt Security gt Administration gt Advanced Setup H
100. he Internet Select Highest High Normal or Low Click the Apply button The rule is saved in the QoS policy table on the QoS Setup screen To edit or delete a MAC address on the MAC Device List in the Priority Category list select MAC Address QoS Priority Rules Priority QoS Policy for c Priority Category MAC Address MAC Device List QoS Policy Priority Device Name MAC Address oO Pri_MAC_12133F Normal MPAWLAN SPARE 00 13 02 12 13 3F MAC Address f A e Device Name Priority Normal MD CA Select the radio button next to the device that you want to edit or delete and do one of the following e To remove the device from the table click the Delete button e To edit the MAC address device name or priority click the Edit button Edit the information you want to change Note You cannot delete or edit a device that is detected and automatically added to the MAC Device List genie ADVANCED Home 64 Trek N300 Travel Router and Range Extender PR2000 31 Click the Apply button The device information is saved or removed from the MAC Device List 32 To allocate half of the WAN bandwidth to a special host in heavy traffic situations select the Enable Trusted IP address check box In the field that is provided enter the IP address of the trusted host 33 Click the Apply button You settings are saved genie ADVANCED Home 65 USB Port Enhan
101. he Setup Wizard When you are done the Congratulations screen displays Congratulations You are successfully connected to the Internet This router is preset with the following unique wireless network name SSID and network key password Wireless Network Name SSID NETGEAR Wireless network key password 1234567890 Prints Take me to the Internet The Trek is connected to the Internet 7 Optional Connect your wireless devices to the Trek For more information see Add Wireless Devices or Computers to Your Trek on page 29 8 Optional To use a USB device connect it to the USB port of the Trek A USB device can be a USB storage drive or a USB printer When the Trek is plugged into the wall the USB port can also be used as a cell phone charger For more information see Enhance Your Local Network on page 67 Hardware Setup 19 Trek N300 Travel Router and Range Extender PR2000 WiFi Bridge Setup Use the Ethernet ports on your Trek to connect up to two Ethernet enabled devices wirelessly to your existing WiFi network Examples of Ethernet enabled devices include an Internet ready TV Blu ray player gaming console and desktop or laptop computer Existing WiFi router Optional Connect a USB device to the USB port Figure 11 Two port WiFi adapter Plug the Ethernet cable from your Ethernet enabled device such as a connected TV Blu ray player or a gaming console to one of the two Ethernet ports
102. he following reasons e Your computer might not recognize any DNS server addresses A DNS server is a host on the Internet that translates Internet names Such as www addresses to numeric IP addresses Typically your ISP provides the addresses of one or two DNS servers for your use If you entered a DNS address during the Trek s configuration reboot your computer and verify the DNS address You can configure your computer manually with DNS addresses as explained in your operating system documentation e Your computer might not have the Trek configured as its TCP IP gateway If your computer obtains its information from the Trek by DHCP reboot the computer and verify the gateway address e You might be running login software that is no longer needed If your ISP provided a program to log you in to the Internet such as WinPoET you no longer need to run that software after installing your Trek You might need to go to Internet Explorer and select Tools gt Internet Options click the Connections tab and select the Never dial a connection radio button Troubleshoot PPPoE If you are using PPPoE try troubleshooting your Internet connection gt To troubleshoot a PPPoE connection 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Troubleshooting 131 Trek N300 Travel Rou
103. he following sections Internet Setup Basic Wireless Settings Change the Wireless Security Option Attached Devices Profile Settings ReadySHARE allows you to enhance your local network with the Trek s USB port For more information see Chapter 5 USB Port 33 Trek N300 Travel Router and Range Extender PR2000 Internet Setup The Internet setup procedure you must use depends on how you want to connect to the Internet Wired WAN connection For an Internet connection with an Ethernet cable use a wired WAN connection The router mode allows your Trek to work as a router between your DSL or cable modem and your local network For more information see Wired WAN Connection Router Mode on page 34 The wireless AP mode allows your Trek to work as a standalone wireless access point on your existing router For more information see Wired WAN Connection Wireless AP Mode on page 36 Wireless WAN connection For an Internet connection with a wireless link use a wireless WAN connection The WiFi mode allows your Trek to connect to the Internet with a WiFi connection For more information see Wireless WAN Connection WiFi Mode on page 39 For information about setting up the hardware see Different Ways You Can Connect to the Internet on page 14 Wired WAN Connection Router Mode You can view or change basic ISP information You can use the Setup Wizard to detect the Internet connection and automatically set up the Trek S
104. he login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Click the ADVANCED tab ADVANCED ADVANCED Home Setup Wizard gt Setup gt USB Storage gt Security y Administration Router Status Logs Attached Devices Backup Settings Set Password Firmware Update gt Advanced Setup F Router Information J Internet Port Hardware Version PR2000 MAC Address 00 C0 02 12 35 89 Firmware Version Y1 0 0 03_1 0 1_trial IP Address 192 168 0 7 GUI Language Version 1 0 0 3 Connection DHCPClient LAN Port IP Subnet Mask 255 255 255 0 MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 DHCP Server On Show Statistics Connection Status v Wireless Settings 2 4GHz Name SSID NETGEAR Region Asia Channel B P 4 8 Mode Up to 300 Mbps Wireless AP Broadcast Name Wireless isolation Help amp Support Documentation Online Support Router FAQ Ea a Mew Enter Search Item Note The Router Status screen also displays when you select ADVANCED gt Advanced Home or ADVANCED gt Administration gt Router Status Router Information Pane gt To display the Router Information pane f eze Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or w
105. i feature of the wireless Trek To specify the times when you do not need a wireless connection select the Turn off wireless signal by schedule check box and enter the information in the fields provided For example you could turn off the wireless signal for the weekend if you leave town You can select the Turn off wireless signal by schedule check box only when the Trek is operating in wired WAN mode Click the Apply button Your changes take effect Set Up a Wireless Schedule You can turn off the wireless signal from your Trek at times when you do not need a wireless connection For example you could turn it off for the weekend if you leave town You can turn the wireless radio off only when the Trek is operating in wired WAN mode gt To configure and enable the wireless schedule hs 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Advanced Settings 110 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Advanced Setup gt Wireless Settings ADVANCED ADVANCED Home Advanced Wireless Settings Setup Wizard Wireless Settings 2 4GHz 2 4GHz bi
106. ial a connection radio button Changes Not Saved If the Trek does not save the changes you make in the Trek interface do the following When entering configuration settings always click the Apply button before moving to another screen or tab or your changes are lost Click the Refresh or Reload button in the web browser The changes might have occurred but the old settings might be in the web browser s cache Incorrect Date or Time gt To display the current date and time 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Troubleshooting 133 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Security gt Schedule ADVANCED ADVANCED Home Schedule Setup Wizard Days to Block Sund gt Setup naa Monday gt USB Storage Tuesday Security Wednesday Thursday Block Services Friday E mail Time of day to block use 24 hour clock IAI Day Start Blocking o Hour o Minute Advanced Setup End Blocking 24 Hour o Minute gt Administration Time Zone GMT Greenwich Mean Time Dublin Edinburgh Lisbon
107. ice Setup Some selections on the ADVANCED Home screen are described in separate chapters e Internet Setup This is a shortcut to the same Internet Setup screen that you can access from the dashboard on the BASIC Home screen See nternet Setup on page 34 e Wireless Setup This is a shortcut to the same Wireless Setup screen that you can access from the dashboard on the BASIC Home screen See Basic Wireless Settings on page 40 e WPS Wizard See Wi Fi Protected Setup Method on page 30 e USB Storage See Chapter 5 USB Port e Security See Chapter 6 Security e Administration See Chapter 7 Administration e Advanced Setup See Chapter 8 Advanced Settings 47 Trek N300 Travel Router and Range Extender PR2000 Setup Wizard The NETGEAR genie installation process is launched the first time you set up the Trek After setting up the Trek the first time if you want to perform this task again you can run Setup Wizard from the ADVANCED tab of the genie gt To launch the Setup Wizard 1 2 6 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Setup Wizard
108. iew or change basic ISP information Use the Setup Wizard to detect the Internet connection and automatically set up the Trek See Setup Wizard on page 48 To view or change the Internet setup 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select BASIC gt Internet Wireless as WAN interne s VI Extend my current wireless router s range Wireless p Available Wireless AP number 8 Security WPAP 7 Status SSID Channel Signal Security Type 1 Attached Devices bnrTer125 aff Wea psK Passphrase Profile Settings Isquinch ofl PA2 PSK 2WIRE340 n PA PSKIWPA2 PSK ReadySHARE To save a name for profile amp M Network PA PSKIWPA2 PSK Wireless_as_WAN HOME CA98 PA PSKIWPA2 PSK Santos PA PSKIWPA2 PSK sugar IPA2 PSK IHOME670 PA PSK 0 0 0 0 0 90 0jo Manually input my wireless SSID Help Center ShowHide Help Center The Wireless as WAN screen displays the WiFi networks that are available in your area 6 If you want to connect to a public WiFi network select the Extend my curren
109. ings shown in the following table Table 3 Factory default settings in from the Internet Feature Default Behavior Router login User login URL www routerlogin com or www routerlogin net User name case sensitive admin printed on product label Login password case sensitive password printed on product label Internet WAN MAC address Use default hardware address connection WAN MTU size 1500 Port speed 10 100 Mbps Autosensing Local network LAN IP 192 168 168 1 printed on product label LAN Subnet mask 255 255 255 0 DHCP server Enabled DHCP range 192 168 168 2 to 192 168 168 200 Allow a registrar to configure this Enabled router DHCP starting IP address 192 168 168 2 DHCP ending IP address 192 168 168 200 DMZ Disabled Time zone GMT 8 for NA GMT 1 for GR PE UK GMT 4 for RU GMT 7 for PR GMT 10 for AU Time zone adjusted for daylight Disabled saving time SNMP Disabled Firewall Inbound communications coming Disabled except traffic on port 80 the HTTP port Outbound communications going Enabled all out to the Internet Source MAC filtering Disabled Supplemental Information 139 Trek N300 Travel Router and Range Extender PR2000 Table 3 Factory default settings continued Feature Default Behavior Wireless Wireless communication Enabled Preset SSID name See Trek label Security option password Preset password see
110. ion mode Up to 54 Mbps Up to 150 Mbps the default or Up to 300 Mbps Wireless AP Indicates whether the radio of the Trek is enabled If the radio is not enabled the WiFi LED is off Broadcast Name Indicates whether the Trek is broadcasting its SSID Wireless Isolation Indicates whether wireless isolation is on or off When it is off wireless clients computers or wireless devices that join the network can use the Internet but cannot access each other or access Ethernet devices on the network Wi Fi Protected Setup Indicates whether Wi Fi Protected Setup is configured for this network Administration 101 Trek N300 Travel Router and Range Extender PR2000 Specify Log Settings A log is a detailed record of the websites that users on your network have accessed or attempted to access If you have set up services blocking on the Block Services screen the Logs screen shows you when someone on your network tried to access a blocked service If you have email notification on you receive these logs in an email message If you do not have email notification set up you can view the logs here gt To view and manage the logs 4 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password
111. is setting controls how the Trek sends and receives RIP packets Both is the default setting With the Both or Out Only setting the Trek broadcasts its routing table periodically With the Both or In Only setting the Trek incorporates the RIP information that it receives e RIP Version This setting controls the format and the broadcasting method of the RIP packets that the Trek sends It recognizes both formats when receiving By default the RIP function is disabled Four RIP versions exist RIP 1 is universally supported It is adequate for most networks unless you have an unusual network setup RIP 2 carries more information Both RIP 2B and RIP 2M send the routing data in RIP 2 format RIP 2B uses subnet broadcasting RIP 2M uses multicasting 7 To set your computers IP addresses manually clear the Use Router as DHCP Server check box NETGEAR recommends that you do not do this For more information see Use the Trek as a DHCP Server on page 56 8 To reserve an IP address for a computer or device on the LAN in the Address Reservation section click the Add button For more information see Set Up Address Reservation on page 58 9 Click the Apply button Use the Trek as a DHCP Server By default the Trek functions as a DHCP server allowing it to assign IP DNS server and default gateway addresses to all computers connected to the Trek s LAN The assigned default gateway address is the LAN IP address of the Tr
112. lable you can use the USB printer e When the status is Manually connected by xxx only the xxx computer can use the printer Other network devices must wait until the xxx computer has released the connection or until the connection times out the default time out value is 30 seconds USB Port 84 Trek N300 Travel Router and Range Extender PR2000 e You can set the value for the default time out time from the Control Center Configuration screen e The USB Control Center utility must be running for the computer to print to the USB printer attached to the Trek If you exit the utility printing does not work e Some firewall software such as Comodo blocks the ReadySHARE Print utility from accessing the USB printer If you do not see the printer in the utility you can disable the firewall temporarily to allow the utility to work 8 If your printer supports scanning make sure that the printer is in the Available state and click the Network Scanner button This step activates the scanner window so that you can use the printer for scanning NETGEAR USB Control Cente USB Port 85 Trek N300 Travel Router and Range Extender PR2000 Power or Recharge a USB Device When your Trek is powered by an AC wall outlet you can power or recharge a USB device from the Trek s USB port For example you can use the USB port to recharge your cell phone For information about how to locate the US
113. less Maximum wireless signal rate complies with the IEEE 802 11 standard See the entry for Transmission speed in Table 3 on page 139 Radio data rates Auto Rate Sensing Data encoding standards Maximum computers per wireless network IEEE 802 11n version 2 0 IEEE 802 11n IEEE 802 119 IEEE 802 11b 2 4 GHz Limited by the amount of wireless network traffic generated by each node typically 50 70 nodes Operating frequency range 2 4 GHz 2 412 2 462 GHz US 2 412 2 472 GHz Japan 2 412 2 472 GHz Europe ETSI 802 11 security WPA PSK WPA2 PSK WEP and WPA WPA2 PSK Supplemental Information 141 Index A access control turning on 114 access remote 119 active static route 118 address reservation 58 alerts emailing 91 ALG Application Layer Gateway 51 applications QoS for 63 approved USB devices 69 76 attached devices 44 authentication required by mail server 92 automatic firmware checking 106 automatic Internet connection 49 backing up configuration 104 105 106 bandwidth control QoS 62 blocking services 88 box contents 7 bridge WiFi setting up 20 C cables checking 127 changes not saved router 133 configuration file 104 connecting wirelessly operating range 7 to hotspot 14 connection status 98 country setting 48 crossover cable 128 CTS RTS Threshold 109 D data packets fragmented 53 date and time 134 daylight saving time 134 default DMZ ser
114. lications such as multiplayer gaming peer to peer connections or real time communications such as instant messaging or remote assistance a feature in Windows XP enable UPnP gt To turn on Universal Plug and Play 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Advanced Setup gt UPnP E Turn UPnP On Advertisement Period in minutes Advertisement Time to Live in haps UPnP Portmap Table Active Protocol A 3 IP Address Select the Turn UPnP On check box By default this check box is selected If the Turn UPnP On check box is cleared the router does not allow any device to automatically control the resources of the Trek Type the advertisement period in minutes The advertisement period specifies how often the Trek broadcasts its UPnP information This value can range from 1 to 1440 minutes The default period is 30 minutes Shorter durations ensure that control points have current device status at the expense of more network traffic Longer durations can compromise the freshness of the device status but can significantly reduce network traffic
115. n displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Administration gt Backup Settings Backup Settings Save a copy of current settings Restore saved settings from a file No file selected Revert to factory default settings Click the Browse button to find and select the cfg file Click the Restore button The file is uploaded to the Trek The Trek reboots WARNING Do not interrupt the reboot process Erase the Current Configuration Settings You can use the Erase button to erase the configuration and restore the factory default settings You might want to erase the settings if you move the Trek to a different network You can also use the Reset button of the Trek to erase the configuration and restore the factory settings For more information see Factory Settings on page 139 gt To erase the configuration settings 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Administration 105 Trek N300 Travel Router and Range Exte
116. n the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Advanced Setup gt Static Routes Static Routes Destination Advanced Settings 117 gt 6 10 11 12 13 14 Trek N300 Travel Router and Range Extender PR2000 Click the Add button Static Routes CCZ Gam Route Name C Private M active Destination IP Address IP Subnet Mask Gateway IP Address Metric In the Route Name field type a name for this static route for identification purposes only If you want to limit access to the LAN only select the Private check box If you select Private the static route is not reported in RIP To make this route effective select the Active check box By default the Active check box is selected Type the IP address of the final destination Type the IP subnet mask for this destination If the destination is a single host type 255 255 255 255 Type the gateway IP address which must be a Trek on the same LAN segment as the Trek Type a number from 1 through 15 as the metric value This value represents the number of Treks between your network and the destination Usually a setting of 2 or 3 works but if this link is a dire
117. nd password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Dynamic DNS C Use a Dynamic DNS Service Service Provider wew DynDNS org Host Name User Name Password 6 Register for an account with one of the Dynamic DNS service providers whose URLs are in the Service Provider list Select the Use a Dynamic DNS Service check box 8 Select the URL of your Dynamic DNS service provider For example for DynDNS org select www DynDNS org 9 Type the host name or domain name that your Dynamic DNS service provider gave you 10 Type the user name for your Dynamic DNS account Enter the name that you use to log in to your account not your host name 11 Type the password or key for your Dynamic DNS account 12 Click the Apply button Your changes are saved Static Routes Static routes provide more routing information to your Trek Under usual circumstances the Trek has adequate routing information after it has been configured for Internet access and you do not need to configure more static routes You must configure static routes only for unusual cases such as multiple Treks or multiple IP subnets on your network As an example of when a static route is needed consider a situation with the following elements e Your primary Internet access is through a cable modem to an ISP Advanced Settings 116 Trek N300 Travel Router and Range E
118. nd then select one of the following options No Limit No restriction is applied when the traffic limit is reached Download only The restriction is applied to incoming traffic only Both Directions The restriction is applied to both incoming and outgoing traffic e Select the Connection time control radio button and enter the allowed hours in the Monthly limit field Optional If your ISP charges for extra data volume when you make a new connection enter the extra data volume in MB in the Round up data volume for each connection by field In the Traffic Counter section set up the traffic counter to begin at a specific time and date of each month If you want the traffic counter to start immediately click the Restart Counter Now button In the Traffic Control section specify whether a warning message is issued before the monthly traffic limit of MB or hours is reached By default the value is 0 and no warning message is issued You can select one of the following to occur when the traffic limit is reached e The Internet LED blinks green or amber Advanced Settings 123 Trek N300 Travel Router and Range Extender PR2000 e The Internet connection is disconnected and disabled 11 Click the Apply button Your changes are saved To continue monitoring Internet traffic after the initial setup 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or w
119. nder PR2000 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Administration gt Backup Settings Settings Save a copy of current settings Restore saved settings from a file Browse No file selected Revert to factory default settings 6 Click the Erase button The factory default settings are restored The password for the user name admin is password and the LAN IP address is 192 168 168 1 DHCP is enabled Update the Trek Firmware The Trek firmware routing software is stored in flash memory You might see a message at the top of the genie screens when new firmware is available for your product You can check and update to the latest firmware for your product when new firmware is available gt To check for new firmware and update your Trek 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays Administration 106 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Administration gt Firmware Update ADVANCED ADVANCED Home Firmware Update Setup Wizard Check for new version from the Int
120. nect buttons in the Connection Status screen display only when the connection mode is Manually Connect Choose any of the following actions a To establish the PPPoE connection manually click the Connect button b To terminate the PPPoE connection manually click the Disconnect button c To close the Connection Status screen click the Close Window button PPTP connection The following information displays fora PPTP connection e Connection Status The status of the connection Connected or Disconnected e IP Address The IP address that is assigned to the Trek e Subnet Mask The subnet mask that is assigned to the Trek The Connect and Disconnect buttons in the Connection Status screen display only when the connection mode is Manually Connect Choose any of the following actions a To establish the PPTP connection manually click the Connect button b To terminate the PPTP connection manually click the Disconnect button c To close the Connection Status screen click the Close Window button Wireless Settings Pane gt To display the Wireless Settings pane 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password Administration 100 Trek N300 Travel Router and Range Extender PR2000 The user name is admin The default passwor
121. ng the appropriate check boxes or select the Every Day check box to select the check boxes for all days e Time of Day to Block Select a start and end time in 24 hour format or select the All Day check box for 24 hour blocking Security 90 Trek N300 Travel Router and Range Extender PR2000 Select your time zone from the list If you use daylight saving time select the Automatically adjust for daylight savings time check box Click the Apply button Your settings are saved Security Event Email Notifications You can receive logs and alerts by email and specify which alerts you want to receive and how often gt To set up email notifications 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Security gt E mail ADVANCED ADVANCED Home E mail Setup Wizard CI Turn E mail Notification On Send alerts and logs through e mail gt Setup Your Outgoing Mail Server gt USB Storage Send to This E mail Address v Security Secure connection use SSL My mail server requires authentication Block Services User Name Schedule Password Send log
122. oas es 88 Schedule BIOGKING newews oumiemosdsrrapecgodtddemrteteemtedades hye ve 90 Security Event Email Notifications 0 0 r cece eee eee eee 91 Chapter 7 Administration View TEKS LACUS Giicncds 86858640 bohe bauiasadGate eeeaekedesGheae none 94 Roviter Information Pane sssr ceded ccogenea eaeeeoek OCA eaugasedadas 94 intermet Port PaE vsiesc ccee 2 ress saorad Son nEn bundle Wee baie EN 95 EN A A NA AIN IE S T EE AEE EE A A AE N EAE 96 COnneCHOM Status nicccdgs musician aesae ea oE enoa 98 Wireless Settings Paeses eos 536050 cecnnecdeaeearwes es coos eensees 100 Specify COGS SEHMGS lt 5 x14 css sacs niere tended gto nb doe wk Shee dnata last ateead nbs 102 Manage the Configuration File 2 c lt sssshesiavouicaatmianevdssoaceues 104 Trek N300 Travel Router and Range Extender PR2000 Back Up Settings corsicictesai near Nhisasedesssetpateaebedeiadasas 104 Restore Configuration Settings 00 cee cece eee eee eee 104 Erase the Current Configuration Settings cece eee eee 105 Update the Trek Firmware sscsccseccccsosdrstorrecteer traia sadiiedet 106 Chapter 8 Advanced Settings Advanced Wireless Settings 0 cc cece cece iriad eee ee eee 109 Control the Wireless Radio casatasas sacdearetvert vows eetadodee neds 109 Set Up a Wireless Schedule sss ssc2s3ce cere eeheogeeer Ses ekuseas eee 110 Viewcor Change WPS Settings 260 c0csacnnniereone totes adanoweawaes 111 Set Up a Wireless Acces
123. oblems first Sequence to Restart Your Network Restart your network in the following sequence 1 Turn off and unplug the modem Turn off the Trek and computers Plug in the modem and turn it on Wait two minutes Turn on the Trek and wait two minutes o gt a Turn on the computers Check Ethernet Cable Connections Make sure that the Ethernet cables are securely plugged in The Internet status LED on the Trek is lit if the Ethernet cable connecting the Trek and the modem is plugged in securely and the modem and Trek are turned on Wireless Settings Make sure that the wireless settings in the computer and Trek match exactly For a wirelessly connected computer the wireless network name SSID and wireless security settings of the Trek and wireless computer must match exactly If you set up an access list in the Advanced Wireless Settings screen you must add each wireless computer s MAC address to the Trek s access list Network Settings Make sure that the network settings of the computer are correct Wired and wirelessly connected computers must have network IP addresses on the same network as the Trek The simplest way to set this up is to configure each computer to obtain an IP address automatically using DHCP Some cable modem service providers require you to use the MAC address of the computer initially registered on the account You can view the MAC address in the Attached Devices screen Troublesho
124. omputer or wireless device to match the current settings for your network Change the Wireless Security Option A security option is the type of security protocol applied to your wireless network The security protocol in force encrypts data transmissions and ensures that only trusted devices receive authorization to connect to your network Wi Fi Protected Access WPA has several options including pre shared key PSK encryption Note The Trek comes with unique preset wireless security These settings are on the product label NETGEAR recommends that you use preset security so that you can refer to the label if you forget the WiFi password However you can change the security option and passphrase WPA encryption is built into all hardware that has the Wi Fi certified seal This seal means that the product is authorized by the Wi Fi Alliance www wi fi org because it complies with the worldwide single standard for high speed wireless local area networking WPA uses a passphrase for authentication and to generate the initial data encryption keys Then it dynamically varies the encryption key WPA PSK uses Temporal Key Integrity Protocol TKIP data encryption implements most of the IEEE 802 11i standard and works with all wireless network interface cards but not all wireless access points WPA2 PSK is stronger than WPA PSK It is advertised to be theoretically indecipherable due to the greater degree of randomness in encryption keys that
125. ot with the LEDs After you turn on power to the Trek the following sequence of events occurs Troubleshooting 127 Trek N300 Travel Router and Range Extender PR2000 1 When power is first applied verify that the Power LED is lit 2 After approximately 30 seconds verify the following e The Power LED is solid green e The Internet LED is lit e If using WiFi the WiFi LED is lit You can use the Trek s LEDs for troubleshooting Power LED Is Off Make sure that the power cord is securely connected to your Trek and that the power adapter is securely connected to a functioning power outlet Make sure that you are using the 12 VDC 2 5A power adapter that NETGEAR supplied for this product LEDs Never Turn Off When the Trek is turned on the LEDs light for about 10 seconds and then turn off If all the LEDs stay lit the fault is within the Trek If all LEDs are still lit one minute after power up do the following e Cycle the power to see if the Trek recovers e Press and hold the Reset button to return the Trek to its factory settings See Factory Settings on page 139 If the error persists you might have a hardware problem Contact technical support at www netgear com support Internet Port LED is Off If the Internet LED does not light when the Ethernet connection is made check the following e Make sure that the Ethernet cable connections are secure at the Trek and at the modem or computer e Make sure tha
126. outerlogin netishares HTTPS via internet https 192 168 0 7 443 shares FTP fip readyshare routerlogin net shares FTP via internet ftpvi192 168 0 7 21 shares E E F Available Network Folders Fak Read Access Write Access Folder Name Volume Name Total Space Free Space Safely Remove USB Device 7 Click the Edit button The Edit Network Folder screen displays the same settings shown in the Create Network Folder screen 8 Change the settings in the fields as needed 9 Click the Apply button Your changes are saved Specify Approved USB Devices For more security you can set up the Trek to share only approved USB devices gt To set up approved USB devices 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays USB Port 76 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Advanced Setup gt USB Settings USB Settings Enable any USB Device connectedto the USBpot yYes Ono OCT G 6 Click the Approved Devices button Jevices aE C Aow only approved devices Approved USB Devices Available USB Devices Device Name O HP
127. p ADVANCED ADVANCED Home QoS Setup Setup Wizard Coc Y Enable WMM Wi Fi multimedia settings Turn Internet Access QoS On Setup Turn Bandwidth Control On Internet Set eee Uplink bandwidthMaximum 256 Kbps Wireless Setup WAN Setup Automatically check Internet Uplink bandwidth LAN Setup QoS Priority Rule list Set Up QoS Rule Enable Trusted IP address Trusted IP Address l gt USB Storage gt Security gt Administration gt Advanced Setup 2 Help Center ShowHide Heip Center 6 Select the Turn Internet Access QoS On check box genie ADVANCED Home 61 Trek N300 Travel Router and Range Extender PR2000 7 To limit the bandwidth that is available for traffic from the Trek to the Internet select the Turn Bandwidth Control On check box 8 Select the Automatically check Internet Uplink bandwidth radio button 9 Click the Check button The Trek detects the available uplink bandwidth After about one minute the available bandwidth displays on the screen This information can help you to determine the maximum bandwidth setting that you want to allow 10 Select the Uplink bandwidth radio button 11 Enter the maximum bandwidth that you want to allow and select either Kbps or Mbps 12 To manage the preconfigured and custom QoS rules click the Set Up QoS rule button QoS Priority Rule list QoS Policy Priority Description S MS
128. r browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select BASIC gt ReadySHARE BASIC Home USB Storage Basic Settings Internet pasic Wireless OReadySHARE Printer Attached Devices gt NetworkiDevice Name g weadyshare Profile Settings gt ReadySHARE z Available Network Folders Share Name Read Access Write Access Folder Name Volume Name Total Space Edit Safely Remove USB Device 2 Help Center Free Space USB Port 72 gt 6 7 Trek N300 Travel Router and Range Extender PR2000 Click the Edit button USB Storage Advanced Settings Network Device Name readyshare Workgroup Workgroup Toa Enable Access Method Link Port Network Neighborhood MacShare weadyshare HTTP http readyshare routerlogin netishares HTTPS via internet https 92 168 0 7 443 shares FTP fipvireadyshare routerlogin netshares FTP via internet fip 192 168 0 7 21 shares Available Network Folders Share Name Safely Remove USB Device Read Access Write Access Folder Name Volume Name Total Space Free Space Scroll down to the Available Ne
129. r the settings for the IP address and DNS server The default settings usually work fine If you have problems with your connection check the following ISP settings Internet IP Address Select one of the following radio buttons Get Dynamically from ISP Your ISP uses DHCP to assign your IP address Your ISP automatically assigns these addresses Use Static IP Address Enter the IP address IP subnet mask and the gateway IP address that your ISP assigned The gateway is the ISP s gateway to which your Trek will connect Domain Name Server DNS Address The DNS server is used to look up site addresses based on their names Select one of the following radio buttons Get Automatically from ISP Your ISP uses DHCP to assign your DNS servers Your ISP automatically assigns this address Use These DNS Servers If you know that your ISP requires specific servers select this radio button Enter the IP address of your ISP s primary DNS server If a secondary DNS server address is available enter it also Router MAC Address The Ethernet MAC address that the Trek uses on the Internet port Some ISPs register the MAC address of the network interface card in your computer when your account is first opened They accept traffic only from the MAC address of that computer This feature allows your Trek to use your computer s MAC address also called cloning Select one of the following radio buttons Use Default Address Use the default MAC
130. r to http www routerlogin net again 2 Help Center EEA Select the Save as profile check box If you want to use your Trek in more than one type of Internet connection a saved profile lets you make connections more quickly In the field provided enter a name for the profile Your saved profiles display on the Profile Settings screen after you click the Apply button For more information see Profile Settings on page 45 Optional Select the Enable fixed IP settings on this device check box NETGEAR recommends that you do not use this feature In the fields provided enter the following information about your Internet connection e IP Address The IP address that your ISP assigned e IP Subnet Mask The IP subnet mask that your ISP assigned e Gateway IP Address The gateway IP address that your ISP assigned The gateway IP address is the ISP s gateway to which your Trek will connect e Primary DNS The IP address of your ISP s primary DNS server e Secondary DNS The IP address of your ISP s secondary DNS server Click the Apply button Your settings are saved If you lose the Wireless AP screen close and restart your web browser The Trek changes to a new IP address that is assigned by your existing router and this screen might not display Enter www routerlogin net and log in again genie BASIC Settings 38 Trek N300 Travel Router and Range Extender PR2000 Wireless WAN Connection WiFi Mode You can v
131. rd The user name and password are case sensitive Click the OK button The BASIC Home screen displays Select ADVANCED gt Setup gt LAN Setup ADVANCED ADVANCED Home LAN Setup Setup Wizard LAN TCPAP Setup zSotup IP Address 192 168 JE Internet Setu IP Subnet Mask 2ss zss 255 o Wireless Setup RIP Direction Both x WAN Setup RIP version Disabled LAN Setup QoS Setup Use Router as DHCP Server Starting IP Address 192 168 1__ 2 gt USB Storage Ending IP Address ig2 168 1 254 RSecurity Address Reservation IP Address Device Name MAC Address gt Administration gt Advanced Setup Help Center ShowHide Help Center Clear the Use Router as DHCP Server check box Click the Apply button If the DHCP service is not enabled on the Trek and no other DHCP server is available on your network you must set your computers IP addresses manually or your computers cannot access the Trek genie ADVANCED Home 57 Trek N300 Travel Router and Range Extender PR2000 Set Up Address Reservation When you specify a reserved IP address for a computer or device on the LAN that computer or device always receives the same IP address each time it accesses the Trek s DHCP server Assign reserved IP addresses to computers or servers that require permanent IP settings To reserve an IP address 1 Launch your browser from a computer or wireless device t
132. rocess the client gets the security settings from the Trek so that every device in the network has the same security settings To connect WiFi devices to your Trek with WPS 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays Click ADVANCED gt WPS Wizard ADVANCED ADVANCED Home Add WPS Client Setup Wizard a New and easy way to connect to the wireless router using Wi Fi Protected Setup WPS WPS Wizard E neS inh j 4 Awireless client has to support the WPS function if you want to use this wizard to add the client to your WPS enabled wireless router gt Setup Please check the user manual and gift box of your wireless client to see whether it supports the WPS function Ifyour wireless client does not support the WPS function you have to configure your wireless client manually so that it has the same SSID and gt USB Storage wireless security settings as this router gt Security gt Administration gt Advanced Setup Help Center ShowHide Help Center 6 Click the Next button 7 Select one of the following radio buttons Get Started with NETGEAR genie 30 Trek N
133. s List by MAC Address 020008 113 DYNAMIGDINS ererirere aarne ennan DEPAETE OASE EEP EE edad ce RA 115 Static ROUTES sc454544 dss bodes eases reddadddaradedarededssodagasas 116 Remote Management score sagccess a E E ES 119 Universal Plugiand Plays seus acnaccnae mocaeawaannin eats sahiadadognh aden 121 Mane MGter x Gachaadtrrceasaaarademiauagabcounieaaweerees EDA 122 Chapter 9 Troubleshooting QUICK TIPS 2 aiumincinwssgas Sex eos E E LETT 127 Sequence to Restart Your Network 0 cece cece e eens 127 Check Ethernet Cable Connections 0 eee eee eee eee 127 Wireless Settings ccossocwnrcagee rer nennmmiGk ete EEEE EET Eaa 127 Network Settings oester OTE ene EE E E e 127 Troubleshoot with the LEDS cece cece eee ete e eee 127 Power LED BOM c cc2cseesd adtSisasadniaadentgebeseteededen Gass 128 LEDS Nev r TUM Offincitaciee casas aceganananaaenmnengeeeGacase aed 128 intemmet Port LED is Offiiis sss ccciiacsadedadadaattesedesa cease acs EESE 128 WiFILEDS Off nsissrcecsccssaciaesoos sbancmiabenotietesesesceses 129 Cannot Leg Inte the Tek lt 6 ctctioveiaisaeaeeadehenebegindiarwsadciesing 129 Cannot Access the Internet 00 cece eee eens 130 TMOWUDIESNOOE PPPOE 1s o cts 0 2 c scnesecotet wale g teandg ase heiir aas 131 Troubleshoot Internet Browsing 00 cece cece eee e eee ees 132 Changes NOt Savediccrcicieic tas Sp atrdiddsadeesagedetedavededdasan 133 Incorrect Date or
134. s according to this schedule gt Administration gt Advanced Setup Help Center Show Hide Help Center Select the Turn E mail Notification On check box In the Your Outgoing Mail Server field enter the name of your ISP s outgoing SMTP mail server such as mail mylSP com You might be able to find this information in the configuration screen of your email program If you leave this field blank log and alert messages are not sent Security 91 10 11 12 13 Trek N300 Travel Router and Range Extender PR2000 Enter the email address to which logs and alerts are sent in the Send to This E mail Address field This email address is also used for the From address If you leave this field blank log and alert messages are not sent To use a secure connection select the Secure connection use SSL check box If your outgoing email server requires authentication select the My Mail Server requires authentication check box Complete the User Name and Password fields for the outgoing email server To have alerts sent immediately select the Send Alerts Immediately check box Email alerts are sent immediately when someone attempts to visit a blocked site Enter the information in the fields in the Send logs according to this schedule section of the screen Logs are sent automatically If the log fills up before the specified time the log is emailed After the log is sent the log is cleared from
135. s set to Wired this port becomes an Internet port When the switch is set to Wireless this port becomes a LAN port for any Ethernet enabled device LAN port A LAN port for any Ethernet enabled device USB port A USB port for USB storage or a USB printer When the Trek is plugged into the wall the USB port can also be used as a cell phone charger Hardware Setup 11 Trek N300 Travel Router and Range Extender PR2000 Power Inputs You can power the Trek with either AC current from a wall socket or a micro USB connection Move the slide switch to the Power Off position before plugging the Trek in to the wall socket Use either of the following methods to power your Trek e AC power connection Fold out the power prongs and plug the unit into an AC wall outlet AR NETO iek r powe oO met a Inter oO Power plug o varies by county o Figure 5 AC power connection e Micro USB connection Connect a micro USB cable to the unit and to a USB port on another device Figure 6 Micro USB connection Hardware Setup 12 Trek N300 Travel Router and Range Extender PR2000 Antenna Orientation The WiFi antenna is inside the cover Rotate the cover to position the antenna AR ete Late ow e ert WA ESSN ifi o B o Figure 7 Antenna orientation For best performance keep the cover vertical when you use your Trek Product Label The device login information URL
136. sable SIP ALG gt USB Storage Disable IGMP Proxying gt Security VPN Passthrough gt Administration IPSec Passthrough Enable O Disabled PPTP Passthrough Enable O Disabled gt Advanced Setup L2TP Passthrough Enable O Disabled Help Center ShowHide Help Center 6 Enter the following settings Disable Port Scan and DoS Protection DoS protection protects your LAN against denial of service attacks such as Syn flood Smurf Attack Ping of Death Teardrop Attack UDP Flood ARP Attack Spoofing ICMP Null Scan and many others By default this check box is cleared Default DMZ Server A demilitarized zone DMZ server can be helpful when you play online games and use videoconferencing Be careful when you use this feature because it makes the firewall security less effective For more information see Default DMZ Server on page 51 genie ADVANCED Home 50 Trek N300 Travel Router and Range Extender PR2000 Respond to Ping on Internet Port If you want the Trek to respond to a ping from the Internet select this check box By default this check box is cleared Use this feature only as a diagnostic tool because it allows your Trek to be discovered Do not select this check box unless you have a specific reason MTU Size in bytes The normal MTU maximum transmit unit value for most Ethernet networks is 1500 bytes or 1492 bytes for PPPoE connections For some ISPs you might need to redu
137. t number 80 is an HTTP web server request The service numbers for many common protocols are defined by the Internet Engineering Task Force IETF at www ietf org and published in RFC1700 Assigned Numbers The authors of other applications typically choose service numbers for those applications from the range 1024 65535 Although the Trek already holds a list of many service port numbers you are not limited to these choices You can often find port number information by contacting the publisher of the application by asking user groups or newsgroups or by searching You can add and block specific Internet services by computers on your network This process is called service blocking or port filtering To add a service for blocking first determine which port number or range of numbers the application uses gt To block services 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays Security 88 Trek N300 Travel Router and Range Extender PR2000 5 Select ADVANCED gt Security gt Block Services ADVANCED ADVANCED Home Block Services Setup Wizard Services Blocking O
138. t power is turned on to the connected modem or computer e Be sure that you are using the correct cable When connecting the Trek s Internet port to a cable or DSL modem use the cable that was supplied with the cable or DSL modem This cable could be a standard straight through Ethernet cable or an Ethernet crossover cable Troubleshooting 128 Trek N300 Travel Router and Range Extender PR2000 WiFi LED is Off If the WiFi LED stays off check to see if the Enable Wireless Router Radio check box on the Advanced Wireless Setting screen is selected The WiFi LED is lit when the wireless radio is turned on Log in to the Trek with an Ethernet cable to check this setting For more information see Advanced Wireless Settings on page 109 Cannot Log In to the Trek If you cannot log in to the Trek from a computer on your local network check the following If you are using an Ethernet connected computer check the Ethernet connection between the computer and the Trek For more information see Check Ethernet Cable Connections on page 127 Make sure that your computer s IP address is on the same subnet as the Trek If you are using the recommended addressing scheme your computer s address is in the range of 192 168 168 2 to 192 168 168 200 If your computer s IP address is shown as 169 254 x x recent versions of Windows and Mac OS generate and assign an IP address if the computer cannot reach a DHCP server These autogenerated
139. t wireless router s range check box If you want to connect to your home WiFi network clear the Extend my current wireless router s range check box 7 Select the radio button that is next to the name SSID of the WiFi network that you want to connect to The security type and passphrase fields for the WiFi network display on the right side of the screen genie BASIC Settings 39 Trek N300 Travel Router and Range Extender PR2000 8 In the field provided enter the passphrase 9 Select the To save a name for profile check box If you want to use your Trek in more than one type of Internet connection a saved profile lets you make connections more quickly 10 In the field provided enter a name for the profile Your saved profiles display on the Profile Settings screen after you click the Apply button For more information see Profile Settings on page 45 11 Click the Apply button Your settings are saved 12 To update the list of available WiFi networks click the Refresh button Basic Wireless Settings You can view or configure the wireless network setup The Trek comes with preset security This means that the WiFi network name SSID network key password and security option encryption protocol are preset in the factory You can find the preset SSID and password on the label of the unit Note The preset SSID and password are uniquely generated for every device to protect and maximize your wireless securit
140. tation Online Support Router FAQ BSNS 104 Ba Mew Enter Search ltem ee Check that an IP address is shown for the Internet port If 0 0 0 0 is shown your Trek has not obtained an IP address from your ISP If your Trek cannot obtain an IP address from the ISP force your cable or DSL modem to recognize your new Trek by restarting your network For more information see Sequence to Restart Your Network on page 127 Troubleshooting 130 Trek N300 Travel Router and Range Extender PR2000 If your Trek is still unable to obtain an IP address from the ISP the problem might be one of the following e Your Internet service provider ISP might require a login program Ask your ISP whether they require PPP over Ethernet PPPoE or some other type of login e If your ISP requires a login the login name and password might be set incorrectly e Your ISP might check for your computer s host name Assign the computer host name of your ISP account as the account name in the Internet Settings screen 8 If your ISP allows only one Ethernet MAC address to connect to Internet and checks for your computer s MAC address do one of the following Inform your ISP that you have bought a new network device and ask them to use the Trek s MAC address Configure your Trek to clone your computer s MAC address If your Trek can obtain an IP address but your computer cannot load any web pages from the Internet it might be for one of t
141. te You must install this utility before you can use the ReadySHARE Printer feature For the ReadySHARE Printer feature to work this utility must be running in the background 4 Follow the instructions to install the NETGEAR USB Control Center utility Welcome to the InstallShield Wizard for NETGEAR USB Control Center The InstallShield R Wizard will install NETGEAR USB Control Center on your computer To continue click Next WARNING This program is protected by copyright law and international treaties USB Port 82 Trek N300 Travel Router and Range Extender PR2000 5 After you install the utility select a language NETGEAR USB Control Center If this setup is the first time you are accessing the utility you are asked to select the printer 6 Click the Connect button te NETGEAR USB Cor Network Scanner USB Port 83 Trek N300 Travel Router and Range Extender PR2000 Once the connection is established the status changes to Manually connected by xxx 7 Click the Disconnect button at any time to release the connection The status then changes to Available ER NETGEAR USB Control Center USB Control Cent For each computer after you click the Connect and Disconnect buttons once the utility automatically handles the printing queue The status of the printer displays as Available on all the computers Here are the rules of operation e When the status is Avai
142. ter and Range Extender PR2000 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select Administration gt Router Status ADVANCED Hardware Version PR2000 MAC Address 00 C0 02 1 2 36 89 Firmware Version 1 0 0 03_1 0 1_trial IP Address 192 168 0 7 WPs wizara GUI Language Version 1 0 0 3 Connection DHCPClient gt Setup LAN Port IP Subnet Mask 255 255 255 0 MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 DHCP Server On gt USB Storage gt Security v Administration Router Status Show Statistics Connection Status Logs Attached Devices Backup Settings v Wireless Settings 2 4GHz Set Password Firmware Update Name SSID NETGEAR Region Asia gt Advanced Setup Channel 8 P 4 S Mode Up to 300 Mbps Wireless AP On Broadcast Name On Wireless isolation Off Help amp Support documentation Online Support Router FAQ SFO Meg Enter Search Item ee 6 Click the Connection Status button If the fields display the correct IP address and time information your PPPoE connection is working If any of the fields indicate failure you can attempt to reconnect by clicking the Renew button The Trek continues to attempt to connect indefinitely If you cannot connect after several minutes you might be using an incorrect servi
143. tings 4 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays USB Port 70 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt ReadySHARE BASIC Home USB Storage Basic Settings Internet pasic Wireless O ReadySHARE Printer Attached Devices NetworkiDevice Name weadyshare Profile Settings Available Network Folders ReadySHARE gt Share Name Read Access Write Access Folder Name Volume Name Total Space Free Space Safely Remove USB Device Help Center Show Hide Help Center 6 Click the Edit button USB Storage Advanced Settings CZE NetworkiDevice Name reaclyshare Workgroup Workgroup s my Access Method Link Network Neighborhood MacShare weadyshare HTTP http readyshare routerlogin netishares HTTPS via internet https 192 168 0 7 443 shares FTP fipireadyshare routerlogin netishares nDoorss FTP via internet ftp 192 168 0 7 21 shares Available Network Folders falas Read Access Write Access Folder Name Volume Name Total Space Free Space Safely Remove USB Device 7 To
144. tworks Folder section of the screen The following information displays e Share Name If only one device is connected the default share name is USB_Storage You can click the name or you can type it in the address field of your web browser If Not Shared is shown the default share has been deleted and no other share for the root folder exists Click the link to change this setting e Read Access and Write Access Show the permissions and access controls on the network folder All no password the default allows all users to access the network folder The password for admin is the same one that you use to log in to the Trek e Folder Name Full path of the network folder e Volume Name Volume name from the storage device either USB drive or HDD e Total Space and Free Space Show the current utilization of the storage device To add a network folder 1 2 Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive Click the OK button The BASIC Home screen displays USB Port 73 5 Select BASIC BASIC Home Internet Wireless Attached Devices Profile Settings Trek N300 Travel Router and Range Extender PR2000 gt ReadySHARE
145. ult gateway If the IP configuration of your computer is assigned by DHCP this information is not visible in your computer s Network Control Panel Verify that the IP address of the Trek is listed as the default gateway e Check to see that the network address of your computer the portion of the IP address specified by the subnet mask is different from the network address of the remote device e Check that your cable or DSL modem is connected and functioning e If your ISP assigned a host name to your computer enter that host name as the account name in the Internet Setup screen e Your ISP might be rejecting the Ethernet MAC addresses of all but one of your computers Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem If your ISP additionally restricts access to the MAC address of a single computer connected to that modem configure your Trek to clone or spoof the MAC address from the authorized computer Troubleshooting 137 Supplemental Information View the Trek specs This appendix covers the following topics e Factory Settings e Technical Specifications Trek N300 Travel Router and Range Extender PR2000 Factory Settings You can return the Trek to its factory settings Use the end of a paper clip or a similar object to press and hold the Reset button for at least seven seconds The Trek resets and returns to the factory configuration sett
146. ur browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Setup gt WAN Setup ADVANCED ADVANCED Home WAN Setup D Setup Wizard Cc Disable Port Scan and DoS Protection Default DMZ Server v Setup Respond to Ping on Internet Port Internet Setuy Wireless Setup MTU Size in bytes 1500 LAN Setup NAT Filtering secured Open QoS Setup Disable SIP ALG gt USB Storage Disable IGMP Proxying gt Security VPN Passthrough EAaminiseation JpSec Rassthraugh Enable O Disabled gt Advanced Setup PPTP Pasathrough Enable O Disabled L2TP Passthrough Enable O Disabled Help Center A ShowHide Help Center 6 Select the Default DMZ Server check box 7 Type the IP address 8 Click the Apply button genie ADVANCED Home 52 Trek N300 Travel Router and Range Extender PR2000 Change the MTU Size The maximum transmission unit MTU is the largest data packet a network device transmits When one network device communicates across the Internet with another the data packets tra
147. use a commercial Dynamic DNS service This type of service lets you register your domain to their IP address and forwards traffic directed at your domain to your frequently changing IP address If your ISP assigns a private WAN IP address such as 192 168 x x or 10 x x x the Dynamic DNS service does not work because private addresses are not routed on the Internet Your Trek contains a client that can connect to the Dynamic DNS service provided by DynDNS org First visit their website at www dyndns org and obtain an account and host name that you configure in the Trek Then whenever your ISP assigned IP address changes your Trek automatically contacts the Dynamic DNS service provider logs in to your account and registers your new IP address If your host name is hostname for example you can reach your Trek at hostname dyndns org Note Before you set up Dynamic DNS on Trek first register an account with one of the Dynamic DNS service providers whose URLs display in the Service Provider list on the Dynamic DNS screen gt To set up Dynamic DNS 1 Launch your browser from a computer or wireless device that is connected to the Trek Advanced Settings 115 Trek N300 Travel Router and Range Extender PR2000 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name a
148. user name and password SSID and wireless password are printed on the product label NETGEAR Trek N300 Travel Router Model PR2000 D l in inf ti evice login Information hitp www routerlogin net URL user name and password user name admin password password Preset wireless network name SSID and wireless network key password 100 240V 50 60Hz 0 3A US LISTED ITE E212778 SER INDOOR USE ONLY Made in China p ZO 9VOZL ZLZ e FCC ID PY313200234 IC 4054A 13200234 Figure 8 Product label Hardware Setup 13 Trek N300 Travel Router and Range Extender PR2000 Different Ways You Can Connect to the Internet Whether you use the Internet in the home or on the go or both the Trek is your solution to a better Internet experience The Trek gives you a way to connect to the Internet while away from home Do you want to connect your devices to the Internet at a WiFi hotspot Connect your Trek to the WiFi hotspot and then connect your devices to your Trek The Trek s firewall protects your personal devices from known DoS attacks and port scans from the Internet For more information see WiFi Connection at a Public Hotspot Setup on page 14 The Trek gives you a way to extend and expand the home network that you already have with your existing Internet connection Use the Trek for any of the following situations e Add a WiFi router to your home network Do you want to connect your wireless devices to
149. utes before it is ready for sharing By default the USB storage device is available to all computers on your local area network LAN gt To access the USB device from a local Mac computer 1 Select Go gt Connect to Server 2 Enter smb readyshare as the server address 3 Click the Connect button gt To access the USB device from a local Windows computer Use any of these methods e Select Start gt Run Enter readyshare in the dialog box and click the OK button e Open a browser and enter readyshare in the address bar e Open My Network Places and enter readyshare in the address bar gt To map the USB device to a local Windows network drive 1 Visit www netgear com readyshare 2 In the ReadySHARE USB Storage Access pane click the PC Utility link The readyshareconnect exe file is downloaded to your computer USB Port 79 Trek N300 Travel Router and Range Extender PR2000 3 Launch readyshareconnect exe What network folder would you like to map Specify the drive letter for the connection and the folder that you want to connect to Drive Folder Example server share V Reconnect at logon Connect using different credentials Connect to a Web site that you can use to store your documents and pictures 4 Select the drive letter that you want to map to the network folder 5 If you want to connect to the USB drive as a different user select the Connect using different cr
150. vel through many devices along the way If any device in the data path has a lower MTU setting than the other devices the data packets must be split or fragmented to accommodate the device with the smallest MTU The best MTU setting for NETGEAR equipment is often just the default value and changing the value might fix one problem but cause another A N WARNING An incorrect MTU setting can cause Internet communication problems such as the inability to access certain websites frames within websites secure login pages or FTP or POP servers Leave the MTU unchanged unless one of these situations occurs e You have problems connecting to your ISP or other Internet service and technical support of either the ISP or NETGEAR recommends changing the MTU setting These web based applications might require an MTU change A secure website that does not open or displays only part of a web page Yahoo email MSN portal America Online s DSL service e You use VPN and have severe performance problems e You used a program to optimize MTU for performance reasons and now you have connectivity or performance problems If you suspect an MTU problem a common solution is to change the MTU to 1400 If you are willing to experiment you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away The following table describes common MTU sizes and applications Table 2 Common MTU sizes MTU
151. ver 51 default factory settings list of 139 restoring 105 default gateway 99 denial of service DoS attacks 50 denial of service DoS protection 87 devices attached 44 DHCP server 56 99 DMZ server 51 DNS addresses primary 36 38 secondary 36 38 troubleshooting 131 viewing 96 99 DoS denial of service attacks 50 Dynamic DNS 115 Dynamic Host Configuration Protocol DHCP 56 DynDNS org 115 E electromagnetic emissions 140 email notices 91 encryption keys 42 erasing configuration 105 Ethernet cables checking 127 F factory default settings list of 139 restoring 105 file sharing 77 firmware version 95 firmware upgrading 26 106 fragmentation length 109 fragmented data packets 53 G gateway IP address 36 38 gateway default 99 genie NETGEAR Trek N300 Travel Router and Range Extender PR2000 setup initial 24 using after installation 25 H hardware version 95 host name 35 IGMP proxy 51 Internet connection setting up 34 36 39 status 98 troubleshooting 25 130 Internet LED description 10 troubleshooting 128 Internet port Setup Wizard 49 viewing settings 95 Internet service provider ISP 23 Internet services blocking access 88 IP addresses DHCP 23 gateway 36 38 reserved 56 58 viewing 95 L LAN port viewing settings 95 LAN setup 54 language setting 48 large files sharing 78 lease DHCP 99 LEDs described 10 troubleshooting 127 logging in 23 25 logs 91 M
152. w routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Wireless Settings ADVANCED ADVANCED Home Advanced Wireless Settings Setup Wizard Wireless Settings 2 4GHz 2 4GHz bigin YI Enable Wireless Router Radio ragmentation Length 256 2346 2346 TS RTS Threshold 1 2347 2347 Preamble Mode Long Preamble gt Security Turn off wireless signal by schedule The wireless signal is scheduled to turn off during the following time period gt Administration Period Start End Recurrence Pattern gt Setup gt USB Storage Advanced Setup i Add a new period WPS Settings Router s PIN 94229882 Dynamic DNS Disable Router s PIN Static Routes Y Keep Existing Wireless Settings 2 4GHz bigin Remote Management j Wireless Card Access List Set Up Access List USB Settings UPnP Traffic Meter Help gt Center Show Hide Help Center By default the Enable Wireless Router Radio check box is selected Advanced Settings 109 6 Trek N300 Travel Router and Range Extender PR2000 Select or clear the Enable Wireless Router Radio check box Clearing this check box turns off the WiF
153. with consecutive IP addresses or all computers on your network 13 Click the Add button Your changes are saved Schedule Blocking You can specify the days and time that you want to block Internet access gt To schedule blocking 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Security gt Schedule ADVANCED ADVANCED Home Schedule Setup Wizard Days to Block Sunday Monday gt USB Storage Tuesday gt Setup F Wednesda zeanuri Thursday Block Services Friday E mail Time of day to block use 24 hour clock IAI Day Start Blocking lo Hour Minute Advanced Setup End Blocking 24 Hour Minute gt Administration Time Zone GMT Greenwich Mean Time Dublin Edinburgh Lisbon London Automatically adjust for daylight savings time Current Time Friday 34 lan 2014 19 44 06 Help Center on Show Hide Help Center 6 Set up the schedule for blocking keywords and services Here is what you can choose e Days to Block Select days on which you want to apply blocking by selecti
154. word are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Administration gt Set Password ADVANCED ADVANCED Home Set Password Set Password gt Setup Repeat New Password gt Security C Enable Password Recovery y Administration Router Status Logs Attached Device Backup Settings Firmware Upgrade gt Advanced Setup 6 Type the old password and type the new password twice in the fields on this screen 7 If you want to be able to recover the password select the Enable Password Recovery check box For more information see Password Recovery on page 27 8 Click the Apply button Password Recovery NETGEAR recommends that you enable password recovery if you change the password for the Trek s user name of admin Then you have an easy way to recover the password if it is Get Started with NETGEAR genie 27 Trek N300 Travel Router and Range Extender PR2000 forgotten This recovery process is supported in Internet Explorer Firefox and Chrome browsers but not in the Safari browser gt To set up password recovery 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive
155. ww routerlogin com in the web browser address bar Administration 94 Trek N300 Travel Router and Range Extender PR2000 The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Click the ADVANCED tab ADVANCED ADVANCED Home Setup Wizard gt Setup gt USB Storage gt Security y Administration Router Status Logs Attached Devices Backup Settings Set Password Firmware Update gt Advanced Setup F Router Information J Internet Port Hardware Version PR2000 MAC Address 00 C0 02 12 35 89 Firmware Version V1 0 0 03_1 0 1_trial IP Address 192 168 0 7 GUI Language Version 1 0 0 3 Connection DHCPClient LAN Port IP Subnet Mask 255 255 255 0 MAC Address 00 C0 02 12 35 88 Domain Name Server 192 168 0 1 IP Address 192 168 1 1 DHCP Server On v Wireless Settings 2 4GHz Name SSID NETGEAR Region Asia Channel 8 P 4 S Mode Up to 300 Mbps Wireless AP Broadcast Name Wireless isolation Help amp Support documentation Online Support Router FAQ Pa Mew Enter Search Item ee The following information displays Hardware Version The Trek model Firmware Version The version of the Trek firmware It changes if you upgrade the Trek firmware GUI Language Version The localized language of the Trek user interfac
156. ww routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays 5 Select ADVANCED gt Advanced Setup gt Traffic Meter Traffic Meter Internet Traffic Meter C Enable Trafic Meter Traffic volume control by Monthly limit l moytes Round up data volume for each connection by lnbytes Connection time control Monthly limit Hours 4 Scroll to view Restart trafic counter at H00 day of each month i more settings Restart Counter Now Traffic Control Pop up a warming message o Mbytes Minutes before the monthly limit is reached When the monthly limit is reached Tum the Internet LED to flashing green amber Disconnect and disable the Internet connection Internet Traffic Statistics Start Date Time Wednesday 31 Dec 1969 03 59 PM Current Date Time Wednesday 31 Dec 1969 04 01 PM Traffic Volume Left 0 Bytes Paoa Connection Time Traffic Volume Mbytes hh mm Upload Avg Download Avg Total Avg Heip Center a ShowHide Helo Center Advanced Settings 124 Trek N300 Travel Router and Range Extender PR2000 6 In the Internet Traffic Statistics section monitor the data traffic Internet Traffic Statistics Start Date Time Thursday 1 Jan 1970 00 00 AM
157. xtender PR2000 You have an ISDN Trek on your home network for connecting to the company where you are employed This Trek s address on your LAN is 192 168 168 100 Your company s network address is 134 177 0 0 When you first configured your Trek two implicit static routes were created A default route was created with your ISP as the gateway and a second static route was created to your local network for all 192 168 1 x addresses With this configuration if you attempt to access a device on the 134 177 0 0 network your Trek forwards your request to the ISP The ISP forwards your request to the company where you are employed and the company s firewall denies the request In this case you must define a static route telling your Trek that 134 177 0 0 should be accessed through the ISDN Trek at 192 168 168 100 This example assumes the following settings The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all 134 177 x x addresses The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN Trek at 192 168 168 100 A metric value of 1 works because the ISDN Trek is on the LAN The Private check box is selected only as a precautionary security measure in case RIP is activated To set up a static route Launch your browser from a computer or wireless device that is connected to the Trek Enter www routerlogin net or www routerlogin com i
158. y NETGEAR recommends that you do not change your preset security settings If you do decide to change your preset security settings make a note of the new settings and store it in a safe place where you can easily find it If you use a wireless computer to change the SSID or other wireless security settings you are disconnected when you click the Apply button To avoid this problem use a computer with a wired connection to access the Trek gt To view or change basic wireless settings 1 Launch your browser from a computer or wireless device that is connected to the Trek 2 Enter www routerlogin net or www routerlogin com in the web browser address bar The login screen displays 3 Enter the Trek user name and password The user name is admin The default password is password The user name and password are case sensitive 4 Click the OK button The BASIC Home screen displays genie BASIC Settings 40 Trek N300 Travel Router and Range Extender PR2000 5 Select BASIC gt Wireless 6 BASIC Home Internet d Select Region Attached Devices Wireless Network 2 4GHz bigin Name SSID NETGEAR Profile Settings gt Channel os os Mode Upto 300 Mbps x ReadySHARE M Enable SSID Broadcast Enable Wireless Isolation Security Options O None WPA2 PSK AES WPA PSK TKIP WPA2 PSK AES O wRAWPA2 Enterprise Security Options WPA2 PSK Passphrase 1234567890 8 6
159. y the NETGEAR genie screen See Use NETGEAR genie After Installation on page 25 Follow the instructions on the screen to complete the NETGEAR genie setup NETGEAR genie guides you through connecting the Trek to the Internet For more information about your Internet connection choices see Different Ways You Can Connect to the Internet on page 14 If the browser cannot display the web page do the following e Make sure that the computer is connected to the LAN Ethernet port or wirelessly to the Trek e Make sure that the Trek is running If it is its WiFi LED is lit e Close and reopen the browser to make sure that the browser does not cache the previous page Get Started with NETGEAR genie 24 Trek N300 Travel Router and Range Extender PR2000 e Browse to www routerlogin net e Ifthe computer is set to a static or fixed IP address this situation is uncommon change it to obtain an IP address automatically from the Trek 7 If the Trek does not connect to the Internet do the following e To be sure that you have selected the correct options and typed everything correctly review the Trek s settings e Contact your ISP to verify that you have the correct configuration information for your main Internet connection e Read Chapter 9 Troubleshooting Use NETGEAR genie After Installation When you first set up your Trek NETGEAR genie automatically starts when you launch an Internet browser on a computer that is conn
160. you start an Internet application your Trek automatically logs you in You might need the following information to set up your Trek e The ISP configuration information for your DSL account e ISP login name and password e Fixed or static IP address settings special deployment by ISP Wireless Devices and Security Settings Make sure that the wireless device or computer that you are using supports WPA or WPA2 wireless security which is the wireless security supported by the Trek For information about the Trek s preconfigured security settings see Basic Wireless Settings on page 40 Types of Logins and Access Different types of logins have different purposes It is important that you understand the difference so that you know which login to use when Types of logins e Trek login The login that your ISP provided logs you in to the Trek interface from NETGEAR genie See Use NETGEAR genie After Installation on page 25 for details about this login e ISP login This logs you in to your Internet service Your service provider gave you this login information in a letter or some other way If you cannot find this login information contact your service provider Get Started with NETGEAR genie 23 Trek N300 Travel Router and Range Extender PR2000 Wireless network key or password Your Trek is preset with a unique wireless network name SSID and password for wireless access This information is on the product label NETGEAR genie
161. your network Convert your home network into a home WiFi network For more information see nternet Connection at Home Setup on page 18 e Extend the range of your home WiFi network Do you want to use your wireless devices at a greater distance from your WiFi router Extend the range of your WiFi router with a WiFi range extender For more information see WiFi Range Extender Setup on page 16 e Bridge the distance to your Internet ready TV Is your Internet ready TV or other Ethernet enabled device too far from your router for an Ethernet cable connection Bridge the distance with a WiFi bridge Examples of Ethernet enabled devices include an Internet ready TV Blu ray player gaming console and desktop or laptop computer For more information see WiFi Bridge Setup on page 20 For information about reconfiguring your Internet connection after initial setup see nternet Setup on page 34 WiFi Connection at a Public Hotspot Setup Use the Trek as a WiFi connection to a wireless network in a WiFi hotspot zone The Trek s firewall protects your devices from known DoS attacks and port scans from the Internet Hardware Setup 14 gt Trek N300 Travel Router and Range Extender PR2000 CAUTION Most public WiFI hotspots offer no security NETGEAR recommends that you do not send personal information over the Internet from your personal devices PUBLIC HOTSPOT A Optional Connect a USB device to the USB port Figure

Download Pdf Manuals

Related Search

Related Contents

D GB NL E F I S  PDFを開く - エムシーアクセス・サポート  Microlithography Chapter 2 E Beam Lithography b  Trust 17014/KIT  Samsung 모션싱크  VL FOREVER 1800 ECO PROGRAM - M0S10337 - 1T02:FEV  Braun RA200 User's Manual  Mikrotik S-RJ01 network switch module  

Copyright © All rights reserved. Failed to retrieve file