Sena SMH10R
Contents
1. VOX phone If this feature is enabled you can answer incoming calls by simply saying a word loudly enough unless you are connected to intercom For example when you hear a series of beeps for an incoming call you can answer the phone by saying Hello or any other word loudly However the phone VOX feature does not work if you are connected to intercom This is enabled from the factory but you can disable it If this mode is disabled you have to tap the Center Button to answer an incoming call 6 7 Enabling Disabling Voice Activated Intercom Voice Prompt VOX intercom Enable Disable Tap the Center Button Tap the Button or the Button until you hear the voice prompt VOX intercom If this feature is enabled you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly enough If you start an intercom conversation by VOX the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds However even when this feature is enabled if you want to terminate intercom conversation manually press and hold the Button for 3 seconds Then you are not able to start intercom by voice temporarily In this case you have to tap the Center Button to restart the intercom This is to prevent repeated unintentional intercom connections by strong wind noise If you tap the Center Button to start an intercom conversation it is not terminate2. Bluetooth SMAIOR Low Profile Motorcycle Bluetooth Headset amp Intercom we a Se PP T Bluetooth Cp 2 E Ge Ge 4 A ch f m C p D e WR N SR K LI 00M Intercom Conference Universal Bluetooth anced Ultra Slim amp Use While mm Firmware ed Intercom Inter Music Sharing si Voice Prompt Stereo Music A2DP oleo Control Feather Light Audio Booster Speed Dial Charging Volume Control Upgradeable SENA www sena com User s Guide SENA SMH10R 1998 2014 Sena Technologies Inc All rights reserved Sena Technologies Inc reserves the right to make any changes and improvements to its product without providing prior notice Sena is a trademark of Sena Technologies Inc or its subsidiaries in the USA and other countries SMH10 SMH10R SMH5 SMH5 FM SPH10 EXPAND SPH10H SPH10H FM SPH10S SR10 SM10 are trademarks of Sena Technologies Inc or its subsidiaries These trademarks may not be used without the express permission of Sena The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sena is under license iPhone iPod touch are the registered trademark of Apple Inc Zumo is a trademark of Garmin Ltd or its subsidiaries TomTom is the trademark or registered trademark owned by TomTom International B V Other trademarks and trade names are those of their respective owners CONTENTS 1 INTRODUC T
3. Mobile Phone phone call e SR10 two way radio GPS guidance Radar detecting signal e Intercom oMH10R SENA Bluetooth Pairing Procedure Case 8 GPS Mobile Phone Pairing P Mobile Phone Pairing b EK Mobile Phone Pairing GPS sch Mobile Phone Mobile Phone J a Mobile so omoi Pairing Pairing Mp3 Player 4 Intercom Pairing Phone Pairing Bluetooth GPS Heron zumo 220 350 550 660 665 TomTom Rider o Pairing Usage e GPS phone call GPS instruction e MP3 Player listening to music e Intercom 47 SENA SMH10R Case 9 Mobile Phone Mobile Phone Pairing e gt at K so a TEE Pairing Pairing Multipoint en 6 Pairing amp Mobile Phone vie i Radar Detector 48 Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Usage Mobile Phone phone call e SR10 two way radio GPS instruction Radar detecting signal e SM10 listening to music sharing e Intercom Case 10 Mobile Phone Mobile Phone O Pairing A ei Intercom Multipoint CET Pairing Pairing Bluetooth GPS e Mobile Phone Mobile Phone Pairing Pairing SM10 Motorcycle MP3 Player Audio System Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Bluetooth
4. Pairing for more details If you want to pair the Sena SR10 Bluetooth adapter please refer to the section 7 5 Pairing with the Sena SR10 Bluetooth Two way Radio Adapter oMH10R SENA 7 3 Bluetooth Stereo Device Pairing 7 4 Bluetooth GPS Navigation Pairing If the Bluetooth stereo device is integrated with a mobile phone You can listen to voice instruction from Bluetooth GPS navigation such as a smartphone you don t need to pair the SMH10R with it Some GPS systems use a mobile phone profile HFP Hands Free separately When the SMH10R is paired with the mobile phone it Profile and others use a stereo music profile A2DP Advanced is also paired as a stereo music device Audio Distribution Profile Most motorcycle specific GPS systems use a mobile phone profile for turn by turn voice instruction You can simultaneously use a mobile phone and a GPS which uses a mobile phone profile by one of the following procedures If you have a stand alone Bluetooth stereo device follow the pairing procedure separately The procedure is the same as the procedure given in 7 1 Mobile Phone Pairing 7 4 1 Multipoint GPS Pairing If you use GPS only for turn by turn voice instructions not for Bluetooth stereo music streaming multipoint pairing is Note 1 If a Bluetooth connection between the headset and a mobile phone is disconnected press the Center Button for 3 seconds until you hear a high tone single beep to recover the
5. GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile Phone phone call e GPS GPS instruction e SM10 listening to music sharing e Intercom SMH10R SENA 49 SENA SMH10R 24 OPERATION QUICK REFERENCE Type Description Button Duration LED Beep Type Description Button Duration LED Beep Center Button amp 1 sec Solid blue Ascending Center Button 5 sec Red Mid tone Power on Button beeps flashing single beep Intercom pairing Basic Center Button amp Tapping Solid red Descending Center Button of any one of the two headsets Power off Function Button beeps Universal intercom Center Button 8 sec Blue Volume adjustment Button or Tapping Intercom pairing flashing Button Start end intercom Center Button Tapping Answer phone call Center Button Tapping conversation Mobile Speed dial Button 3 sec o abe conference Center Button 1 sec EE e Phone g p intercom g g p Reject incoming Center Button 2 sec Play pause Center Button 1 sec Mid tone call Bluetooth music double beep Music Button or 1 sec Track forward back Button 50 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This
6. Sy Terminate End Two way Intercom Conversation 1St intercom friend and intercom friend grd intercom friend Start ipia m single tap Double tap Triple tap End intercom single tap Start amp End Two way Intercom 13 2 Voice Activated Intercom VOX Intercom If VOX Intercom is enabled by the configuration setting as described in section 6 6 you can initiate an intercom conversation with the last connected intercom friend by speaking any word loudly The easiest way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone If you start an intercom conversation by VOX the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds However if you manually start an intercom oMH10R SENA conversation by tapping the Center Button you have to terminate the intercom conversation manually 13 3 Intercom and Mobile Phone Call 1 When you have an incoming mobile phone call during an intercom conversation you will hear a ring tone You can choose whether to 1 answer the mobile phone call and stop the intercom conversation or 2 reject the phone call and stay on the intercom conversation or 3 ignore the incoming phone call and allow the caller to go to voice mail a To answer the phone call and stop the intercom conversation tap the Center Button The phone VOX feature does not work if you are connected to intercom When you hang up the phone cal
7. and previous track 1 To adjust the volume tap the Button or the Button 29 SENA SMH10R 2 To play or pause music press the Center Button for 1 second until you hear a mid tone double beep 3 To track forward or track back press the Button or the Button for 1 second until you hear a mid tone single beep You can stop music streaming while you are listening to the music by pressing the Button for 4 seconds until you hear high tone double beeps 26 12 MOBILE PHONE CALL MAKING AND ANSWERING 12 1 Mobile Phone Call Making and Answering 1 When you have an incoming call tap the Center Button to answer the call 2 You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering is enabled unless you are connected to intercom 3 To end a call press the Center Button for 2 seconds until you hear a mid tone single beep or wait for the called person to end the call 4 To reject a call press the Center Button for 2 seconds until you hear a beep while the phone is ringing 5 There are several ways to make a phone call Enter numbers on your mobile phone keypad and make a call Then the call is automatically transferred to the headset In stand by mode press the Center Button for 3 seconds to activate the voice dialing of your mobile phone You will hear a high tone single beep Your mobile phone has to support voice dialing Ref
8. device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antennae Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help oMH10R SENA FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satistying RF exposure compliance The antenna used for this transmitter must not
9. following the simple procedures in 7 1 Mobile Phone Pairing When you do this the SMH10R thinks the GPS is a mobile phone But the SMH10R can directly pair an additional mobile phone HFP A2DP Mobile Phone Pairing a vy HFP Multipoint SMH10R Pairing Mobile Phone GPS Pairing as Mobile Phone SMH10R SENA The incoming audio from the two way radio via SR10 is heard Note You have to use a motorcycle specific GPS which transmits turn by in the background while having an intercom conversation or a turn voice instruction to the headset by Bluetooth Most automotive GPS mobile phone call You can listen to music answer a mobile call systems don t have this feature have an intercom conversation and use a two way radio via the SR10 for group communication as shown in the figure below A GPS navigation or a radar detector that has a headphone jack or audio line out could be connected to the SR10 by wire GPS voice instruction or the radar detector alarm can also be heard in the background via SR10 while having an intercom conversation or phone call Please refer to the SR10 user s guide for details 7 5 Pairing with the Sena SR10 Bluetooth Two way Radio Adapter The Sena SR10 is a Bluetooth two way radio adapter for group communication and uses HFP as do most motorcycle specific GPS navigation systems If you pair the SMH10R with an SR10 by multipoint pairing the SMH10R is able to have two HFP devices a
10. place where wireless communication is prohibited such as hospitals or airplanes turn off the power and refrain from using the product In a place where wireless communication is prohibited electromagnetic waves may cause hazards or accidents 53 SENA SMH10R Do not use the product near hazardous explosives When there are near any explosion hazards turn off the power and heed any regulations instructions and signs in the area e When using the product drive at a low speed slower than 35km h for safety In addition be certain to conform to laws regarding the use of communications devices while driving Do not put the product where it may hamper the driver s vision or manipulate it while driving This may cause traffic accidents e Before driving fasten the product to the helmet and double check that it is fastened Separation of the product while driving may cause damage to the product or accidents e f the product is damaged stop using it immediately It may cause damage explosion or fire Battery This product has an irreplaceable rechargeable battery inside Therefore when using the product make sure to adhere to the following Never separate the battery from the product as this may damage the product he battery performance may be reduced over time with usage 54 e In recharging the battery make sure to use an approved charger provided by the manufacturer Use of a non approved charger may cau
11. transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi transmitter product procedures FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment CE Declaration of Conformity This product is CE marked according to the provisions of the R amp TTE Directive 99 5 EC Hereby Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For further information please consult www sena com Please note that this product uses radio frequency bands not harmonized within EU Within the EU this product is intended to be used in Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Portugal Spain Sweden United Kingdom and within EFTA in Iceland Norway and Switzerland 51 Industry Canada Statement This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference 2 This device must accept any interference including interference that may cause undesired operation of the device Bluetooth License The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sena is under license Other trademarks and trade name
12. 2 You must completely understand and accept all risks including those occurring due to any careless behavior of yours or others which may occur during the use of this product 3 You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it In addition you must ensure that the product does not limit your abilities and that you are able to use it safely 95 SENA SMH10R 4 You must be an adult who can take responsibilities for using the product 5 You must read and understand the following warnings and alerts e Sena together with employees managers partners subsidiaries representatives agents supporting firms and suppliers sole sellers of Sena collectively referred to as the company recommend that before using the product and similar devices of any brands including its derivative models you collect any relevant information in advance and be entirely prepared in terms of weather traffic situation and road conditions When you use the product while you operating any vehicle or equipment such as motorcycles scooters mopeds ATVs or quad bikes hereinafter called as transportation means you must take complete caution regardless of the location of such operation Use of the product on the road may cause such risks as fracture serious disability or death Hisk factors which may occur when y
13. 23 SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Mobile Phone Mobile Phone 9 Pairing 42 y T y y Intercom Multipoint Des Pairing Pairing Bluetooth GPS Bluetooth Pairing Procedure Mobile Phone Pairing Multipoint Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile phone phone call listening to music e GPS GPS instruction e Intercom Case 2 GPS Mobile Phone Pairing Bluetooth GPS Mobile Phone Mobile Phone Pairing Intercom Pairing Bluetooth Pairing Procedure GPS Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth GPS zumo 550 660 665 TomTom Rider Usage e GPS zumo 660 665 GPS instruction phone call listening to music zumo 550 TomTom Rider GPS instruction phone call e Intercom oMH10R SENA Case 3 Ki GPS Bluetooth GPS Mobile Phone Pairing e e Intercom Multipoint Pairing Pairing Mobile Phone Bluetooth Pairing Procedure Mobile Phone Pairing Multipoint Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile Phone phone call e GPS zumo 660 665 GPS instruction listening to music zumo 220 350 550 TomTom Rider GPS instruction e Intercom 43 SENA SMH10R Case 4 Mobile Phone Mobile Phone Pairing interesom Mobile Phone a Pairing Pairing Bluetooth GPS Bluetooth Pairing Procedure Mobile Phone Pairi
14. Bluetooth connection immediately recommended for the GPS connection Multipoint Bluetooth pairing 2 If a Bluetooth connection between the headset and a media player allows the SMH10R to connect two HFP devices at the same time is disconnected press the Center Button for 1 second to recover the mobile phone and GPS navigation Follow the steps below to pair Bluetooth connection and play the GPS using multipoint pairing 1 To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu 2 Tap the Button and you will hear the voice prompt Phone pairing 3 Search for Bluetooth devices on the GPS navigation screen oelect Sena SMH10R in the list of devices detected on the GPS 4 Enter 0000 for the PIN SENA SMH10R 5 The GPS confirms that pairing has completed and the SMH10R is ready to use You will hear the voice prompt Your headset is paired 6 If the pairing process is not completed within three minutes the SMH 10R will return to stand by mode The pairing diagram for multipoint GPS pairing is shown in the figure below Smart Phone HEP Mobile Phone A2DP Pairing gy HFP Multipoint SMH10R Pairing Multipoint GPS Pairing 20 7 4 2 GPS Pairing as Mobile Phone If GPS is not only used for turn by turn voice instructions but is also your preferred Bluetooth stereo music source you can pair the GPS to the SMH10R by
15. D 1 You A may start an intercom conversation with the non Sena Bluetooth headset B V we A C PS B D 37 SENA SMH10R 2 The other SMH10R C may join the intercom by making an 4 Now two SMH10R headsets A amp C and two non Sena Bluetooth intercom call to you A headsets B amp D are connected with the four way Universal p Intercom amp A e e kk A F a A B D B D 3 The non Sena Bluetooth headset D may join the conference intercom by making an intercom call to the SMH10R C You may disconnect a four way Universal Intercom using the p p same way as you do in a normal four way intercom Please refer vy EI v to section 15 2 End Four way Intercom J A C vi PS Qd B D 38 17 4 2 Four way Universal Intercom Case 2 Three SMH10R headsets A C and D and one non Sena Bluetooth headset B The procedure is the same as the case 1 described in section 17 4 1 D D oSMH10R SENA Note The Universal Intercom affects both the phone call connection on a non Sena and the multipoint connection on a Sena headset If the non Sena headset does not support a multipoint connection then a phone call connection will be unavailable while using the Universal Intercom If the non Sena headset that has been paired to the Sena headset is powered on and is automatically connected then the multipoint connection of the Sena headset will be deacti
16. ION croisirii a toet eme dv int Eus tUa TU eben itat Eur E cats 5 2 PACKAGE CONTENT SS 45er nth bete ea emo senten koci 6 3 INSTALLING THE SMH10R ON YOUR HELMET 7 4 POWERING ON OFF AND CHARGING 0 10 ATOM ON Tr 10 4 2 Powering Off 1oapensezizintdzqueseceddzttktes cessent cessent 10 EE e de A E e at DE 10 4 4 Low Battery Warning A 11 4 5 Checking the Battery Level ssseseseen 11 9 VOLUME ADUJUS MENT 11 6 SMH10R CONFIGURATION SETTING eese 12 6 1 Mobile Eenegkeet 13 6 2 Multipoint Pairing EE 13 6 3 Phone Selective Pairing 13 6 4 Media Selective Hang 13 6 5 Assigning Speed Dial 2 is 14 6 6 Enabling Disabling Voice Activated Phone Answering 14 6 7 Enabling Disabling Voice Activated Intercom 15 6 8 Setting Intercom VOX Sensitivity eese 15 6 9 Enabling Disabling Voice Prompts 2 15 oMH10R SENA 6 10 Enabling Disabling Sidetone ssesseeeeee 16 6 11 Delete All Bluetooth Pairing Information 16 6 12 Reset to Factory Default Setting 16 6 13 Exit Voice Configuration Menu sss 16 7 PAIRING THE SMH10R WITH BLUETOOTH DEVICES 17 7 1 Mobile Phone EEN sae eode ba xit herd eat ea db abbate de 18 7 2 Multipoint Pairing MCN T o 18 7 3 Bluetooth Stereo Device Pairing ssseeeeeee 19 7 4 Bluetooth GPS Navigation Pairing 19 7 5 Pairing with the Sen
17. R can be paired with up to three other headsets for Bluetooth intercom conversation 1 Turn on the two SMH10R headsets A and B that you would like to pair with each other 2 Press and hold the Center Button for 5 seconds then you will hear a mid tone single beep and the voice prompt Intercom pairing 3 Simply tap the Center Button of any one of the two headsets A or B it doesn t matter which you choose and wait until the LEDs of both headsets turn to blue and intercom connection is automatically established The two SMH10R headsets A and B are paired with each other for intercom conversation If the pairing process is not completed within one minute the SMH10R will return to stand by mode 23 SENA SMH10R 5 The intercom pairing queue is Last Come First Served If a headset has multiple paired headsets for intercom a vy conversations the last paired headset is set as the first B PA A D intercom friend The previous intercom friend becomes the second Intercom friend and third intercom friend p For example after the pairing procedures listed above headset D is the first 7 intercom friend of headset A Headset C is the second intercom friend of 7 headset A and headset B is the third intercom friend of headset A Pairing A amp B 9 2 Pairing with Other Sena Headset Models for 4 You can make other pairings between headsets A and C and Intercom Conversation between headset
18. X phone VOX sensitivity 6 1 Mobile Phone Pairing Factory Default N A To go into mobile phone pairing mode tap the Button or the Button until you hear the voice prompt Phone pairing Please refer to section 7 1 for details on mobile phone pairing If you tap the or the Button you can exit from the phone pairing mode 6 2 Multipoint Pairing Voice Prompt Multipoint pairing Factory Default N A To go into multipoint pairing mode tap the Button or the Button until you hear the voice prompt Multipoint pairing Please refer to section 7 2 for details on multipoint pairing If you tap the or the Button you can exit from the multipoint pairing mode oSMH10R SENA 6 3 Phone Selective Pairing Voice Prompt Phone selective pairing Factory Default N A To go into phone selective pairing mode tap the Button or the Button until you hear the voice prompt Phone selective pairing Please refer to section 8 for more details on phone selective pairing If you tap the Button or the Button you can exit from the phone selective pairing mode 6 4 Media Selective Pairing Factory Default N A To go into media selective pairing mode tap the Button or the Button until you hear the voice prompt Media selective pairing Please refer to section 8 for more details on media selective pairing If you tap the Button or the Button you can exit from the medi
19. a SR10 Bluetooth Two way Radio Adapter 21 8 PAIRING WITH SELECTIVE PROFILE HFP OR A2DP STEREO 22 8 1 Phone Selective Pairing HFP for Phone Call Only 23 8 2 Media Selective Pairing A2DP Stereo Music Only 23 9 INTERCOM PAIRING E 23 9 1 Pairing with Other SMH10R Headsets for Intercom Conversation 23 9 2 Pairing with Other Sena Headset Models for Intercom COVE SSCL TTE 24 TO FUNG TION PRIORITY EE 25 1 STEREU OT 25 12 MOBILE PHONE CALL MAKING AND ANSWERING 26 12 1 Mobile Phone Call Making and Answering ssssse 26 12 2 Speed Dialing E 27 SENA SMH10R 13 TWO WAY INTERCOM 13 1 Start and End Two way Intercom 13 2 Voice Activated Intercom VOX Intercom 13 3 Intercom and Mobile Phone Call 13 4 Intercom and GPS 13 5 Intercom and Two way Hado sss 14 THREE WAY CONFERENCE INTERCOM 14 1 Start Three way Intercom 14 2 End Three way Intercom 15 FOUR WAY CONFERENCEINTERGOM 15 1 Start Four way INterCOM EE 15 2 End Four way Intercom 10 MUSIC SHARING E 17 UNIVERSAL INTERGOONL es en 17 1 Universal Intercom Pairing eee 17 2 Two way Universal Intercom 17 3 Three way Universal Intercom 17 4 Four way Universal Intercom 18 THREE WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANTS un 19 INTERCOM FAILURE 20 INTERCOM HECONNEGTION 552 5 nnt ROREM tiep udis ee n 40 ZI ET chs KEE 41 22 FIRMWARE UPGRADE there EE de
20. a selective pairing mode Co SENA SMH10R 6 5 Assigning Speed Dial Factory Default N A 1 To assign a phone number as a speed dial tap the Button or the Button until you hear a voice prompt saying Speed dial 2 Tap the Center Button and you will hear a voice prompt saying Speed dial one and Phone connected 3 Tap the Button or the Button to select one of three speed dial numbers and you hear a voice prompt saying Speed dial 4 Call a phone number you want to assign and you will hear a voice prompt saying Save speed dial The phone number is automatically assigned to the selected speed dial number Then the phone call will hang up before being connected 5 To exit the menu tap the Button or the Button until you hear a voice prompt saying Cancel and tap the Center Button to confirm You will then hear a voice prompt saying Cancel f any button is not pressed within 1 minute the SMH10R will exit the configuration menu and go back to stand by mode Note 1 You can assign up to 3 phone numbers for speed dial 2 You can assign phone numbers for speed dialing by using the Sena Device Manager software For more information visit the Sena Bluetooth web site at www sena com 6 6 Enabling Disabling Voice Activated Phone Answering Enable Disable Tap the Center Button Tap the Button or the Button until you hear the voice prompt
21. ack from the battery pack holder push the battery pack upward SMH10R SENA 9 You can attach the battery pack on the inside of your helmet Attach the adhesive tape of the velcro pad on the back plate of the battery pack Place the battery pack inside of your helmet as seen in the picture below SENA SMH10R 4 POWERING ON OFF AND CHARGING 4 1 Powering On Press the Center Button and the Button at the same time for 1 second to power on The blue LED turns on and you will hear ascending beeps and Hello 4 2 Powering Off Tap the Center Button and the Button simultaneously you don t need to press and hold in order for the system to power off The red LED turns on for about 2 seconds until it turns off completely and you will hear Goodbye and descending beeps 4 3 Charging The charging LED beside the charging port turns red while charging and turns to blue when the headset is fully charged It takes about 2 5 hours to be completely charged You can use the SMH10R while it is charging This is especially helpful when you use a cigarette charger for a long road trip You can charge the SMH10R on a helmet by connecting the supplied USB power amp data cable or cigarette charger You can use any standard micro USB cable to charge the SMH10R You can use the 2 Pin Connector to Micro USB Adaptor for charging the SMH10R with the battery pack You should connect the USB power amp data cable first t
22. ap the Center Button If you want to exit the speed dial immediately tap the Button or the Button until you hear a voice prompt saying Cancel and tap the Center Button If any button is not pressed within 15 seconds the SMH10R will exit the voice speed dial menu and goes back to stand by mode tap the Center Button while it is in progress Note To cancel the voice dialing or redialing last number command Make sure that you should connect the mobile phone and the headset in order to use the speed dial function 2r SENA SMH10R Answer Tap the Center Button or Say Hello End Press the Center Button for 2 Reject Press the Center Button for 2 Call Use phone keypad Speed Dial Press the Button for 3 Voice Command Press the Center Button for 3 Mobile Phone Call Button Operations 28 13 TWO WAY INTERCOM 13 1 Start and End Two way Intercom 1 You can start a one on one intercom conversation with any intercom friend by tapping the Center Button Single tapping to intercom with the first intercom friend double tapping for the second intercom friend or triple tapping for the third intercom friend ee 2 d Intercom Friend Ae 15 Intercom Friend ef 3 d Intercom Friend Start Two way Intercom Conversation 2 To terminate a one on one intercom conversation single tap the Center Button This will end the intercom conversation D
23. ction with non Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets You may single tap the Center Button to begin an intercom conversation with the first intercom friend double tap with the second intercom friend and triple tap with the third intercom friend Non Sena Bluetooth headsets may initiate the Universal Intercom connection activating the voice dialing or using the redialing operation You may also disconnect the existing connection by ending a call operation function refer to the users manual of the headsets for voice dialing redialing and ending a call 35 17 3 Three way Universal Intercom You may make a three way Universal Intercom connection with two SMH10Rs and one non Sena Bluetooth headset If the intercom connection is made all headsets connected cannot use the mobile phone call function since the connection between the headset and the phone is disconnected temporarily If you disconnect the intercom call the mobile phone connection is made again automatically so that you can use a mobile phone call function During the intercom call you cannot pick up the incoming phone call since it is disconnected however you can pick it up if you disconnect the intercom call 1 You A need to be paired with non Sena Bluetooth headset B and another SMH10R headset C for the three way conference intercom 36 SENA SMH10R 2 Start an intercom conversatio
24. d by 20 seconds of silence After turning the SMH10R off and on you can Start intercom by voice again SMH10R SENA 6 8 Setting Intercom VOX Sensitivity Voice Prompt VOX sensitivity Factory Default 3 Tap the Button or the Button 1 5 Tap the Center Button Level Adjustment Apply Tap the Button or the Button until you hear the voice prompt VOX sensitivity By tapping the Center Button it will lead you to the level adjustment mode If you enter the mode you will hear a prompt stating the current VOX sensitivity level You may adjust the VOX sensitivity level by tapping the Button or the Button Level 5 is the highest sensitivity setting and 1 the lowest After you have completed the setting tap the Center Button to apply the changes 6 9 Enabling Disabling Voice Prompts Voice Prompt Voice prompt Enable Disable Tap the Center Button You can disable voice prompts by configuration setting but the following voice prompts are always on Voice prompts for configuration setting menu Voice prompts for battery level Indicator Voice prompts for factory reset 6 10 Enabling Disabling Sidetone Enable Disable Tap the Center Button Sidetone is the sound of your own voice as picked up by your headsets microphone and reproduced in your own ear by your own speaker It helps you to naturally speak at the correct level according to varying helmet noise cond
25. d temperatures Abrupt changes in temperatures may cause condensation and damage electronic circuits Do not clean the product with cleaning solvents toxic chemicals or strong detergents as this may damage the product Do not paint the product Paint may obstruct moving parts or interfere with the normal operation of the product Do not drop or otherwise shock the product It may damage the product or its internal electronic circuits Do not disassemble repair or modify the product as this may damage the product and invalidate the product warranty oMH10R SENA Product Use n some regions it is prohibited by law to ride motorcycles or bicycles while wearing headsets Therefore be certain to comply with all relevant laws in the region before using the product Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability Keep the volume at a modest level Do not cause impact to the product or touch it with sharp tools as this may damage the product Do not use the product in high temperatures or apply heat to the product as this may cause damage explosion or fire Keep the product dry and away from water It may damage the product Keep product away from pets or small children It may damage the product or cause accidents Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference with the product n any
26. e Center Button you can terminate the intercom connection with the first intercom friend B However you still have the intercom connection with your second intercom friend C To disconnect from intercom friend C double tap the Center Button Now both intercom friends are disconnected Center Button Resut Disconnect B amp C B Single tap Disconnect B Double tap Disconnect C End Three way Intercom oMH10R SENA 15 FOUR WAY CONFERENCE INTERCOM 15 1 Start Four way Intercom You can have four way conference intercom with three other SMH10R users by adding one more intercom participant to the three way intercom While you are having three way intercom as above in section 14 1 a new participant D who is an intercom friend of your intercom friend C may join the conference intercom by making an intercom call to your intercom friend C Please note that in this case the new participant D is an intercom friend of C not of you A kk P A4 P K New p First Friend Second Friend B C Intercom Friend of C 33 SENA SMH10R 15 2 End Four way Intercom As in the case of three way intercom you can completely exit from the four way conference intercom or just disconnect a single intercom connection 1 Press the Center Button for 1 second until you hear a beep to terminate four way conference intercom It terminates the intercom connections between you A and your int
27. econnect the mobile phone and receive the call 31 SENA SMH10R 1 You A need to be paired with two other friends B amp C for three way conference intercom P LA RS ad A s A x x 9 g F First Friend Second Friend B 2 Start an intercom conversation with one of the two friends in your intercom group For example you A may start an intercom conversation with intercom friend B Or intercom friend B may start an intercom call with you A P D fi A amp First Friend Second Friend B 32 3 The second intercom friend C may join the intercom by making an intercom call to you A amp JS b Second Friend b First Friend B 4 Now you A and two SMH10R intercom friends B amp C are having a three way conference intercom P amp Ts _ amp Second Friend b First Friend B 14 2 End Three way Intercom When you are a member of an active three way conference intercom you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends 1 Press the Center Button for 1 second until you hear a beep to terminate three way conference intercom completely It terminates both intercom connections with B and C 2 Tap or double tap the Center Button to disconnect intercom connection with one of the two intercom friends accordingly For example by single tapping th
28. eeh 41 23 SENA BLUETOOTH CONNECTION CASE STUDIES 42 24 OPERATION QUICK REFERENCE 1426 50 CERTIFICATION AND SAFETY APPROVALS 51 FCC Compliance Statement 51 FCC RF Exposure Statement 25r ett nonet tetur 51 FCC CORRE ae ia 51 CE Declaration of Conformity ass iuter ed 3 e obire ian 51 Industry Canada Statement 52 Bluetooth ler 52 WEEE Waste Electrical and Electronic Equipment 52 SAFETY INFORMATION ES E geg 53 Product Storage and Management 53 POUR as a 53 A eer eee tye rere nee 54 PRODUCT WARRANTY AND DISCLAIMER 55 Limited Eu 05 Warranty e 56 Warranty Service a a dd 58 Return for Full RUE insistent ant 58 1 INTRODUCTION Thank you for choosing the Sena SMH10R Low Profile Bluetooth Stereo Headset and Intercom With the SMH10R you can call handsfree on your Bluetooth mobile phone listen to stereo music or voice instructions from your GPS navigation system by wireless Bluetooth and have intercom conversations in full duplex with a passenger or other motorcycle riders The SMH10R is compliant with Bluetooth 3 0 supporting the following profiles Headset Profile Hands Free Profile HFP Advanced Audio Distribution Profile A2DP and Audio Video Remote Control Profile AVRCP Please check with the manufacturers of other devices to determine their compatibility with this headset Please read this user s guide carefully before using
29. een expired or when the product damage is beyond the scope of the product warranty For further information on charged service you may contact the service center of Sena 58 Return for Full Refund Should you not agree to the terms and conditions explained above you may return the product for a full refund To get a refund within 14 days from the purchase date you must return the product to the seller in such a condition as it was purchased Unless you return the product within 14 days from the purchase date you will have read and agreed to all the terms and conditions explained above and Sena will not be liable for any claim for damages related with the product 1 3 0 ce re IC gs ee SENS A www sena com User s Guide for Firmware v5 0
30. er to your mobile phone manual for further instructions Note 1 If you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone then you may still receive the call from second phone In this case the call from the first phone is on waiting mode If you end a call then it will automatically guide you to the first phone call 2 If you are using multipoint connection of mobile phone and GPS you may not be able to listen to the GPS voice instruction during the phone call 12 2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu 1 To enter into the voice speed dial menu press and hold the Button for 3 seconds and you will hear a mid tone single beep and a voice prompt saying Speed dial 2 Tap the Button or the Button to navigate between the menus You will hear voice prompts for each menu item 3 Tap the Center Button to select a voice menu among the followings 1 Last number redial 4 Speed dial 3 2 Speed dial 1 5 Cancel 3 Speed dial 2 SMH10R SENA After selecting the last number redial menu you will hear a voice prompt saying Last number redial Then to redial the last phone call number tap the Center Button To call one of the speed dials tap the Button or the Button to navigate between the menus until you hear a voice prompt saying Speed dial Then t
31. ercom friends B and C 2 Tap or double tap the Center Button to disconnect the intercom connection with one of the two intercom friends accordingly However when you disconnect the second friend C by double tapping the Center Button you will be disconnected with the third participant D as well This is because the third participant D is connected with you via the second friend C Genter Button 1 Resut ee Single tap Disconnect B Double tap Disconnect C amp D End Four way Intercom 34 16 MUSIC SHARING You can start sharing music with an intercom friend using Bluetooth stereo music during a two way intercom conversation When you terminate music sharing you can go back to the intercom conversation To start or terminate sharing music press and hold the Center Button for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music To track forward or track back press the Button or the Button for 1 second until you hear a mid tone single beep Note 1 Both you and your intercom friend can remotely control music playback during music sharing such as track forward and track back 2 When you have an incoming call make a phone call or hear the turn by turn voice instruction of GPS during music sharing the function will be paused 3 In order to share music make sure that you update both headsets with the f
32. es the mobile phone and the SMH10R To clear the pairing list on the SMH10R please do a factory reset or follow the pairing list clearing procedure described in this manual To clear the pairing list on the mobile phone please refer to the mobile phone manual For most smartphones delete Sena SMH10R from the list of Bluetooth devices in setting menu 8 1 Phone Selective Pairing HFP for Phone Call Only 1 To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu Triple tap the Button and you will hear the voice prompt Phone selective pairing Search for Bluetooth devices on your smartphone Select Sena SMH10R in the list of devices detected on your phone Enter 0000 for the PIN Some smart phones may not ask for a PIN 8 2 Media Selective Pairing A2DP Stereo Music Only 1 To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu Tap the Button four times and you will hear the voice prompt Media selective pairing Search for Bluetooth devices on your smartphone Select Sena SMH10R in the list of devices detected on your phone Enter 0000 for the PIN Some smartphones may not ask for a PIN SMH10R SENA 9 INTERCOM PAIRING 9 1 Pairing with Other SMH10R Headsets for Intercom Conversation The SMH10
33. irmware that has the music sharing feature and enable the EDR setting in the Sena Device Manager 17 UNIVERSAL INTERCOM You can have an intercom conversation with non Sena Bluetooth headsets using the Universal Intercom function Non Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands Free Profile HFP The working distance may differ depending on the performance of Bluetooth headset that it is connected to In general it is shorter than normal intercom distance since it uses the Bluetooth Hands Free Profile 17 1 Universal Intercom Pairing The SMH10R can be paired with non Sena Bluetooth headsets for Bluetooth intercom conversation You can pair the SMH10R with only one non Sena Bluetooth headset if you pair with a different non Sena Bluetooth headset the previous pairing list will be removed 1 Turn on the SMH10R and the non Sena Bluetooth headset you want to pair with 2 Press and hold the Center Button on the SMH10R for 8 seconds until the blue LED flashes rapidly You will hear a voice prompt Universal Intercom pairing oMH10R SENA 3 Perform the operation required for handsfree pairing on the non Sena Bluetooth headset refer to the users manual for the headsets you want to use The SMH10R will automatically pair with a non Sena Bluetooth headset when each are in pairing mode 17 2 Two way Universal Intercom You can initiate the Universal Intercom conne
34. itions If this feature is enabled you can hear what you are saying during an intercom conversation or a phone call 6 11 Delete All Bluetooth Pairing Information Voice Prompt Delete all pairings Factory Default N A Enable Disable Tap the Center Button To delete all Bluetooth pairing information on the SMH10R tap the Button or the Button until you hear the voice prompt Delete all pairings Tap the Center Button to confirm 16 SENA SMH10R 6 12 Reset to Factory Default Setting Voice Prompt Factory reset Factory Default N A To restore factory default settings on the SMH10R tap the Button or the Button until you hear the voice prompt Factory reset Tap the Center Button to confirm The SMH10R powers off with a voice prompt Headset reset goodbye Tap the Center Button 6 13 Exit Voice Configuration Menu Voice Prompt Exit configuration Factory Default N A Execute Tap the Center Button To exit voice configuration menu and get back to stand by mode tap the Button or the Button until you hear the voice prompt Exit configuration Tap the Center Button to confirm Tap Button or Button Tap Center Button Phone Pairing None Multipoint Pairing None Phone Selective Pairing None Media Selective Pairing None Speed Dial Execute VOX Phone Enable disable VOX Intercom Enable disable VOX Sensitivity Enter adjustment
35. l Start amp End Three way Conference Phone Call 40 19 INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or is on a mobile phone call you will hear a low tone double beep signifying that the intercom is busy In this case you have to try again later 20 INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation you may hear static and eventually the intercom will be disconnected In this case the SMH10R automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished If you don t want to make a reconnection tap the Center Button to stop the attempt 21 FAULT RESET When the SMH10R is not working properly or is faulty for any reason you may reset it by pushing the pin hole reset button at the front of the headset main unit Insert a paper clip into the reset pin hole and press the reset button for a second using light pressure The SMH10R will be switched off and you have to turn the system back on and try again However this will not restore the headset to the factory default settings 22 FIRMWARE UPGRADE oMH10R SENA The SMH10R supports a firmware upgrade function Please visit the Sena Bluetooth web site at www sena com to check the latest software downloads 41 SENA SMH10R
36. l the intercom will automatically be recovered b To reject the phone call and stay on the intercom conversation press the Center Button for 2 seconds until you hear a beep c To ignore an incoming phone call just wait until the caller goes to voice mail You will maintain the intercom call while the caller is leaving a voice message Unlike other motorcycle Bluetooth headsets this prevents a user from being dropped out of an intercom conversation by an incoming mobile call 2 When you have an incoming intercom call during a mobile phone call you will hear 4 high tone beeps alerting you that there is an incoming intercom call You will also hear the voice 29 SENA SMH10R prompt Intercom requested In this case the intercom call does not override the mobile phone call because intercom has a lower priority than a mobile call You have to hang up the mobile phone call to make or receive an intercom call 13 4 Intercom and GPS If you pair a Bluetooth GPS to the SMH10R as described in 7 4 of this user s guide you can hear the turn by turn voice instructions of the GPS while having an intercom conversation GPS voice instruction interrupts intercom conversation but it is automatically reestablished after the GPS voice instruction ends Voice Multipoint Instruction Pairing HFP y Intercom 7 Mobile Phone E Intercom L Smart Phone Pairing SMHIOR Pairing Intercom Friend Intercom and GPS voice instructio
37. mode Set up 1 2 3 4 5 or cancel Save and exit Exit Configuration Execute Voice Configuration Menu amp Button Operations oMH10R SENA 7 PAIRING THE SMH10R WITH BLUETOOTH DEVICES Before using the SMH10R Bluetooth headset with any Bluetooth device for the first time you need to do the pairing operation It can be paired with Bluetooth mobile phones Bluetooth stereo devices such as MP3 or motorcycle specific Bluetooth GPS and with a Bluetooth adapter or transmitter such as Sena SR10 or SM10 This pairing operation is only required once for each Bluetooth device The headset will remain paired with the devices and automatically connects to the paired devices again when they are within range You will hear a high tone single beep and a voice prompt when the headset connects to a paired device automatically Phone connected for a mobile phone or Media connected for a Bluetooth stereo device 7 1 Mobile Phone Pairing 1 DO OD To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu By tapping the Button you will hear the voice prompt Phone pairing Search for a Bluetooth device on your mobile phone Select Sena SMH10R in the list of devices detected on the mobile phone Enter 0000 for the PIN Some mobile phones may not ask for a PIN The mobile phone confirms that pairing has comple
38. n 30 13 5 Intercom and Two way Radio As described in 7 5 of this user s guide you can use a two way radio and SMH10R Bluetooth intercom simultaneously by using the Sena SR10 a Bluetooth Two way Radio Adapter along with the SMH10R Incoming audio from the two way radio does not interrupt an intercom conversation but is heard in background This is useful when you have an intercom conversation with a passenger on the back seat and use a two way radio for group communication with other motorcycle riders Smart Phone Two way Radio EIE Mobile Phone A2pP Pairing Wired Connection Audio from Two way Radio Sena SR10 Wired Connection Multipoint Pairi SMH10R airing Wired Connection Intercom sd com airing Intercom Friend Radar Detector Intercom and Two way Radio SMH10R SENA 14 THREE WAY CONFERENCE INTERCOM 14 1 Start Three way Intercom You A can have a three way conference intercom with two other SMH10R friends B amp C by establishing two intercom connections at the same time While a three way conference intercom is in progress the mobile phone connection of all three participants would be temporarily disconnected but as soon as the conference intercom terminates or one of the participants leaves the intercom all mobile phones would be automatically reconnected During the conference intercom if you have an incoming mobile phone call terminate the conference intercom to automatically r
39. n with non Sena Bluetooth headset B in your intercom group For example you A may start an intercom conversation with non Sena Bluetooth headset B The non Sena Bluetooth headset B may also start an intercom call with you A 7 K B C 3 The other SMH10R C may join the intercom conversation by making an intercom call to you A p LS T B C 4 Now you A non Sena Bluetooth headset B and the other SMH10R C are having a three way conference intercom 4 A 78 B C 5 You may disconnect the three way Universal Intercom using the same way as you do in normal three way intercom Please refer to section 14 2 End Three way Intercom oMH10R SENA 17 4 Four way Universal Intercom You may make a four way Universal Intercom connection with a couple of different configurations 1 three SMH10Rs and one non sena Bluetooth headset or 2 two SMH10Rs and two non Sena Bluetooth headsets You may have a couple of other four way Universal Intercom configurations 1 your headset A a non Sena Bluetooth headset B another SMH10R C and a non Sena Bluetooth headset D 2 your headset A a non Sena Bluetooth headset B and two other SMH10R headsets C and D You may make the four way Universal Intercom call the same way as a normal four way intercom call 17 4 1 Four way Universal Intercom Case 1 Two SMH10R headsets A and C and two non Sena Bluetooth headsets B and
40. national laws In addition be aware once again that correct and safe use of the product is entirely your responsibility Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF ITS PRODUCTS EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT SENA S OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE IN ANY CASE THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER oMH10R SENA Liabilities Disclaimer In addition to damages which may occur due to the use of the product Sena will not be liable for damages of the product which occur due to the following events e In the event the product is misused or used for purposes other than its intended purposes e n the event the product is damaged because the user does not follow the co
41. ng Mobile Phone Pairing Intercom Pairing Bluetooth GPS Yupiteru smartohone apps Usage e Mobile Phone phone call e GPS GPS instruction e Intercom 44 Case 5 Mobile Phone Mobile Phone o Pairing eu Intercom Mobile Phone Pairing Pairing Motorcycle Bluetooth Audio System Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Motorcycle Bluetooth Audio System BMW R1200RT K1600GT K1600GTL Usage Mobile Phone phone call Motorcycle Bluetooth Audio System listening to music GPS instruction e Intercom SMH10R SENA Case 6 Bluetooth Pairing Procedure Mobile Phone Pairing Mobile Phone Pairing Multipoint Pairing Intercom Pairing Mobile Phone o Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider d PE Phone O Pairing Motorcycle Bluetooth Motorcycle Bluetooth Audio System Audio System Mobile Phone 7 BMW R1200RT K1600GT K1600GTL Usage e Mobile Phone phone call M e Motorcycle Bluetooth Audio System listening to music e Pairing e GPS GPS instruction e Intercom Intercom Pairing SSS Bluetooth GPS 45 SENA SMH10R Case 7 Mobile Phone Mobile Phone 2 Pairing oi pg Multipoint Pairing Intercom Pairing d dl ec Radar Detector 46 Bluetooth Pairing Procedure Mobile Phone Pairing Multipoint Pairing Intercom Pairing Usage
42. ntent of the product manual e In the event the product is damaged because it has been left unattended or has undergone any other accident n the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer e Ip the event the product is damaged because the user has disassembled repaired or modified it in such way as is not explained in the product manual e In the event the product is damaged by a third party e n the event the product is damaged due to Acts of God including fire flood earthquake storm hurricane or other natural disaster e In the event the surface of the product is damaged by use 57 SENA SMH10R Warranty Service To obtain product warranty service send the defective product at your expense to the manufacturer or the seller along with proof of purchase a receipt that shows the purchase date a product registration certificate of the Website and other relevant information Take necessary measures to protect the product In order to get a refund or replacement you must include the whole package as it was purchased Free of charge Service Sena will provide free of charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period Charged Service Sena will provide charged repair or replacement service for the product when the product warranty period has b
43. o Pads for Speakers Reject an incoming mobile phone call Start and end intercom conversation Play and pause Bluetooth stereo device Enter intercom pairing mode Enter voice configuration menu Velcro Pad for Wired Microphone CM oMH10R SENA Velcro Pad for Battery Pack IEEE 3 INSTALLING THE SMH10R ON YOUR HELMET Double Sided Adhesive Tapes for Battery Pack Holder bl To securely install the main unit of the SMH10R you can use the velcro pad or double sided adhesive tape Please follow the procedure below Verro Pues tor Main Unit ge 1 Peel off the cover of the adhesive tape of the velcro pad and attach it on the back plate of the main unit Double Sided Adhesive Tapes for Main Unit Microphone Sponges i E USB Power amp Data Cable CS 2 Locate a suitable surface on your helmet to attach the unit clean Cigarette Charger N 7 the location with a moistened towel and allow to dry thoroughly 3 Peel off the cover of the adhesive tape on the velcro pad and SE Ee attach the pad on the left side of your helmet Optional Accessory Battery pack SC A0301 1 You can purchase an additional battery pack for replacement o NEM SENA SMH10R 4 Attach the main unit to the velcro pad of your helmet pp 5 You can also use double sided adhesive tape Peel off the cover of the double sided adhesive tape and attach it to the back plate of the main unit Then do
44. o the 2 Pin Connector to Micro USB Adaptor and then to the SC A0301 battery pack in series The battery pack is sold separately as an optional accessory 4 4 Low Battery Warning When the battery is low the blinking blue LED in stand by mode turns to red and you will hear mid tone triple beeps and a voice prompt Low battery 4 5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on 4 5 1 LED Indicator When the headset is powering on the red LED flashes rapidly indicating the battery level 4 flashes High 70 100 3 flashes Medium 30 70 2 flashes Low 0 30 4 5 2 Voice Prompt Indicator When you power on the headset keep pressing the Center Button and the Button simultaneously for several seconds until you hear high tone triple beeps Then you will hear a voice prompt indicating the battery level However if you release the buttons as soon as the headset turns on you will not hear the voice prompt giving the battery level indication SMH10R SENA 5 VOLUME ADJUSTMENT You can easily adjust the volume by tapping the Button or the Button You will hear a beep when the volume reaches maximum or minimum level The volume is set and maintained independently at different levels for each audio source even when you turn the headset off and on For example once you set the volume for mobile phone handsfree it will not change even if you adj
45. ou use the product may be due to errors of the manufacturer its agents or third parties which are involved in the manufacturing Hisk factors which may occur when you use the product may be unforeseeable Therefore you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product 56 e When you use the product use good judgment never use it under the influence of alcohol 6 You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product In addition usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it you relinquish all rights to liabilities loss claims and claims for reimbursement of expenses including attorney s fees Therefore Sena will not be liable for physical injury death or any loss or damage of transportation means possessions or assets which belong to you or third parties that may have occurred while you use the product Further Sena will not be liable for any substantial damage not related to the condition environment or malfunction of the product All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party Use of this product may violate local or
46. s A and D by following the same procedure The SMH10R can be paired with all other Sena headset models as above such as the SPH10 and the SMH5 for intercom conversation s d Please follow the same procedure as above to pair with these headset models e Note The SMH5 cannot participate in three way or four way conference intercom with the SMH10R The SMH5 has a limited capability and can only manage two way intercom or with other Sena headset models e D amp D Pairing amp C Pairing amp D 24 10 FUNCTION PRIORITY The SMH10R operates in the following order of priority highest Mobile phone Intercom Music sharing by Bluetooth stereo music lowest Bluetooth stereo music A lower priority function is always interrupted by a higher priority function For example stereo music is interrupted by an intercom call and intercom conversation is interrupted by an incoming mobile phone call oSMH10R SENA 11 STEREO MUSIC You can listen to stereo music from your Bluetooth wireless audio device The Bluetooth audio device must be paired with the SMH10R by following the Bluetooth Stereo Device Pairing procedures described in chapter 7 3 The SMH10R supports the Audio Video Remote Control Profile AVRCP so if your Bluetooth audio device also supports AVRCP you can use the SMH10R to remotely control music playback You can not only adjust the volume but also use functions such as play pause next track
47. s are those of their respective owners The product is compliant with and adopts the Bluetooth Specification 3 0 and has successfully passed all interoperability tests that are specified in the Bluetooth specification However interoperability between the device and other Bluetooth enabled products is not guaranteed 52 SENA SMH10R WEEE Waste Electrical and Electronic Equipment The crossed out wheel bin symbol on the product literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life This requirement applies to the European Union and other locations where separate collection systems are available To prevent possible harm to the environment or human health from uncon trolled waste disposal please do not dispose of these products as unsorted municipal waste but hand it in at an official collec tion point for recycling SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and or damage to property Product Storage and Management Keep the product free of dust It may damage mechanical and electronic parts of the product Do not store the product in high temperatures as this may reduce the life span of electronic devices damage the battery and or melt plastic parts of the product Do not store the product in col
48. se fire explosion leakage and other hazards may also reduce the life time or performance of the battery e Store the battery at temperatures of 15 C 25 C 59 F 77 F Higher or lower temperatures may reduce the capacity and life of the battery or may cause temporary non operation Do not use the product in sub zero temperature because it may cause serious reduction of the battery performance e f you apply heat to the battery or throw it into fire it may explode Do not use the product with a damaged battery It may explode and or cause accidents Never use a damaged charger It may explode and or cause accidents e Battery life may vary depending on conditions environmental factors functions of the product in use and devices used with it PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies Inc Sena guarantees the product quality based on the technical specification stated in the product manual and data regarding product warranty Here product warranty extends to the product only Sena will not be liable for any loss damage of human life or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture Warranty Period Sena guarantees free of charge replacements of defective parts of the product or flaws that may have occurred due to problems in manufacture for a period of 2 years from the date of initial p
49. t the same time a mobile phone and the Sena SR10 1 To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu 2 Press the Button twice and you will hear the voice prompt Multipoint pairing 3 Turn on the SR10 and follow the SR10 s Bluetooth Headset Pairing procedure to complete the process Please refer to the SR10 user s guide for details 4 When the pairing is completed you will hear the voice prompt Your headset is paired 5 If the pairing process is not completed within three minutes the SMH10R will return to stand by mode 21 SENA SMH10R Smart Phone Two way Radio AFF Mobile Phone A2DP Pairing Wired Connection 7 wy Multipoint SMH10R Pairing Wired Connection HFP Sena SR10 Wired Connection Radar Detector Parallel Connection of SR10 and Mobile Phone by Bluetooth Multipoint Pairing 22 8 PAIRING WITH SELECTIVE PROFILE HFP OR A2DP STEREO If you have a MP3 stereo music phone such as a smartphone sometimes you may need to selectively use the SMH10R for A2DP stereo music only or for mobile phone handsfree only This instruction is for advanced users who want to pair the SMH10R to their smartphones with only one selective profile A2DP stereo for music or HFP for phone call If you have previously paired a mobile phone to the SMH10R you must clear the previous pairing list on both devic
50. ted and the SMH10R is ready to use You will hear the voice prompt Your headset is paired If the pairing process is not completed within three minutes the SMH10R will return to stand by mode 7 2 Multipoint Pairing Typical Bluetooth headsets can connect with only one HFP Hands Free Profile device but multipoint pairing allows the headset to connect with two HFP devices at the same time So when you already have a mobile phone connected with the SMH10R you can also pair and connect a second mobile phone or other HFP device such as GPS or the Sena SR10 Bluetooth adapter 18 SENA SMH10R To enter the voice configuration menu press and hold the Center Button for 12 seconds until you hear the voice prompt Configuration menu Double tap the Button then you will hear the voice prompt Multipoint pairing If you want to pair a second mobile phone search for the Bluetooth device on your mobile phone and select Sena SMH10R in the list of devices detected on the mobile phone Enter 0000 for the PIN Some mobile phones may not ask for the PIN The mobile phone confirms that pairing has completed and the SMH10R is ready to use You will hear the voice prompt Your headset is paired If you want to pair a GPS by multipoint pairing search for the Bluetooth device on the GPS screen and select Sena SMH10R at step 3 Please refer to the section 7 4 1 Multipoint GPS
51. the headset Also check www sena com for the latest version of the user s guide and additional information related to Sena Bluetooth products oMH10R SENA The SMH10R features e Bluetooth handsfree for Bluetooth mobile phones Bluetooth stereo headset for Bluetooth audio devices such as MP3 players e Bluetooth stereo headset for Bluetooth GPS navigation Bluetooth intercom up to 900 meters 980 yards Four way conference intercom Three way conference phone call with intercom participant Universal Intercom Multipoint Bluetooth for dual mobile phone e Speed Dialing e Sidetone e Advanced Noise Control e Light weight and ultra slim profile Firmware upgradeable Key Specifications Bluetooth 3 0 e Supporting profiles Headset Profile Hands Free Profile HFP Advanced Audio Distribution Profile A2DP Audio Video Remote Control Profile AVRCP in open terrain SENA SMH10R 2 PACKAGE CONTENTS Speakers Headset Main Unit e Attachable Boom Microphone Button Button e Volume adjustment Speaker Connector e Navigate through voice W r Microphone Connector configuration menu iraa EST MP3 Track forward and track back Charging LED e dd Battery Pack Battery Pack Holder e Battery Pack Connector Speaker Pads Q Velcro Pad for Boom Microphone ce Center Button e DC Power Charging amp Answer and end a mobile phone call Firmware Upgrade Port Velcr
52. the step 2 and peel off the other side cover of the adhesive tape and attach the main unit on the left side of your helmet 6 Place the speakers in the helmet along with the velcro pads centered to your ear in the ear pockets of the helmet If the helmet has deep ear pockets you can use the speaker pads to place the speakers closer to your ears Attach the speaker connector to the 4 pin connector of the main unit cable There are two types of microphone that can be installed in your helmet In the case of the attachable boom microphone place the velcro end of the boom microphone between the internal helmet cheek pad and the internal wall of the helmet shell and attach the microphone connector to the 2 pin connector of the main unit cable The boom microphone should be mounted so it is positioned close to your mouth when you are wearing the helmet CO In the case of the wired microphone attach the velcro pad for the wired microphone to the inside of the chin guard for full face helmets Place the wired microphone on the velcro pad and attach the microphone connector to the 2 pin connector of the main unit cable Attach the double sided tape to the battery pack holder in the same manner as the main unit Insert the battery pack down in the battery pack holder until you feel the click that signals a secure attachment Attach the battery connector to the 2 pin connector of the main unit cable To get rid of the battery p
53. urchase Termination Quality warranty of the product becomes effective on the date of initial purchase In addition the quality warranty of the product expires when the warranty period expires However in the following cases the warranty will be terminated prematurely e In the event the product has been sold or transferred to a third party e In the event the manufacturer s name serial number product label or other markings have been modified or removed oMH10R SENA e n the event any unauthorized person has tried to disassemble repair or modify the product Notice and Waiver By buying and using this product you relinquish considerable legal rights including any claim for compensation for damages Therefore be certain to read and understand the following terms and conditions before using the product Use of this product will constitute consent to this agreement and forfeiture of rights to all claims If you do not consent to all the terms and conditions of this agreement return the product for a refund Refer to the section Return for Full Refund 1 You agree that you your descendants legal proxies successors or transferees will not raise permanent volitional request for any suit claim implementation redemption or similar action from Sena with regard to any occasion such as difficulty pain suffering inconvenience loss injury or death which may occur to you or a third party during the use of this product
54. ust the volume when you hear Bluetooth MP3 music So you can always maintain the preferred optimum volume level for each audio source SENA SMH10R 6 SMH10R CONFIGURATION SETTING You can set the configuration of the SMH10R by the voice menu instructions as below 1 To enter the voice configuration menu press and hold the Center Button for 12 seconds until the LED shows solid blue and you hear high tone double beeps You will also hear the voice prompt saying Configuration menu Tap the Button or the Button to navigate between the menus You will hear voice prompts for each menu item as below 3 You can enable disable a feature or execute a command by tapping the Center Button 4 f you want to exit configuration immediately tap the Button or the Button until you hear the voice prompt saying Exit configuration then tap the Center Button DO The voice prompt for each menu item is as follows 1 Phone pairing 8 VOX sensitivity 2 Multipoint pairing 9 Voice prompt 3 Phone selective pairing 10 Sidetone 4 Media selective pairing 11 Delete all pairings 5 Speed dial 12 Factory reset 6 VOX phone 7 VOX intercom 13 Exit configuration Phone pairing Exit configuration Multipoint pairing Factory reset Phone selective pairing Delete all pairings Media Selective pairing Sidetone Speed Dial Voice prompt VO
55. vated Therefore the multipoint paired device such as a GPS will not be available for use with the Sena headset while the non Sena headset is powered on and turning it off will not automatically restore the multipoint connection To restore the multipoint connection on a Sena headset you should turn off the non Sena headset first then try to connect the multipoint paired device manually from the device screen or simply reboot the multipoint paired device so that it automatically connects to the Sena headset 39 SENA SMH10R 18 THREE WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT You can have a three way conference phone call by adding an intercom friend to the mobile phone conversation While having a mobile phone call make an intercom call to one of your intercom friends B C or D by tapping the Center Button once twice or three times to form a three way conference call with the person on the mobile phone line To disconnect the intercom first and go back to your private mobile phone call terminate the intercom by tapping the Center Button once To end the mobile phone call first and maintain the intercom conversation press the Center Button for 2 seconds or wait for the person on the mobile phone line to end the call Start Tap the Center Button while having a mobile phone call End intercom first Tap the Center Button Press the Center Button for 2 End phone call first or Wait for the called person to end the cal
Download Pdf Manuals
Related Search