Gigabyte GA-J1900N-D3V (rev. 1.0)
Contents
1. USB 3 0 2 0 Port The USB 3 0 port supports the USB 3 0 specification and is compatible to the USB 2 0 1 1 specification Use this port for USB devices such as a USB keyboard mouse USB printer USB flash drive and etc Line In Jack Blue The line out jack Use this audio jack for line in devices such as an optical drive walkman etc Line Out Jack Green The line out jack Use this audio jack for a headphone or 2 channel speaker This jack can be used to connect front speakers in a 4 5 1 7 1 channel audio configuration Mic In Jack Pink The default Mic in jack Microphones must be connected to this jack To configure 7 1 channel audio you have to use an HD front panel audio module and enable the multi channel audio feature through the audio driver device and then remove it from the motherboard e When removing the cable pull it straight out from the connector Do not rock it side to side to prevent an electrical short inside the cable connector When removing the cable connected to a back panel connector first remove the cable from your Note The DVI D port does not support D Sub connection by adapter 10 1 6 Internal Connectors 10 14 146 2 CREEL CD d CELT EIELI CELL 1 ATX_12V 8 SPDIF_O 2 ATX 9 F_USB 3 CPU_FAN 10 LPT 4 SYS_FAN 11 BAT 5 SATA2 0 1 12 CLR_CMOS 6 F_PANEL 13 Cl 7 F AUDIO 14 DEBUG PORT A Read the following gu2. gt Enabled All PS 2 devices are functional in the operating system and during the POST Default This item is configurable only when Fast Boot is set to Enabled NetWork Stack Driver Support gt Disabled Disables booting from the network Default gt Enabled Enables booting from the network This item is configurable only when Fast Boot is set to Enabled Boot Option 1 2 3 Specifies the overall boot order from the available devices For example you can set hard drive as the first priority Boot Option 1 and DVD ROM drive as the second priority Boot Option 2 The list only displays the device with the highest priority for a specific type For example only hard drive defined as the first priority on the Hard Drive BBS Priorities submenu will be presented here Removable storage devices that support GPT format will be prefixed with UEFI string on the boot device list To boot from an operating system that supports GPT partitioning select the device prefixed with UEFI string Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64 bit select the optical drive that contains the Windows 7 64 bit installation disk and is prefixed with UEFI string Hard Drive CD DVD ROM Drive Floppy Drive Network Device BBS Priorities Specifies the boot order for a specific device type such as hard drives optical drives floppy disk drives and devices that support Boot from LAN function e
3. Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN storage device and graphics controllers gt gt UEFI First Enables UEFI option ROM first Default gt gt Legacy only Enables legacy option ROM only This item is configurable only when CSM Support is set to Enabled USB Configuration Legacy USB Support Allows USB keyboard mouse to be used in MS DOS Default Enabled USB3 0 Support Enables or disables the USB 3 0 controller Default Enabled XHCI Hand off Determines whether to enable XHCI Hand off feature for an operating system without XHCI Hand off support Default Enabled EHCI Hand off Determines whether to enable EHCI Hand off feature for an operating system without EHCI Hand off support Default Disabled USB Mass Storage Driver Support Enables or disables support for USB storage devices Default Enabled Mass Storage Devices Displays a list of connected USB mass storage devices This item appears only when a USB storage device is installed Realtek PCle GBE Family Controller This sub menu provides information on LAN configuration and related configuration options Realtek PCle GBE Family Controller This sub menu provides information on LAN configuration and related configuration options oe 2 4 Chipset Aptio Setup Utility Copyright C 2013 American Megatrends Inc Main Advanced Security Boot Save amp Exit Realtek LAN Contr
4. The front panel audio header supports Intel High Definition audio HD and AC 97 audio You may connect your chassis front panel audio module to this header Make sure the wire assignments of the module connector match the pin assignments of the motherboard header Incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it For HD Front Panel Audio For AC 97 Front Panel Audio i i Pin No Definition Pin No Definition 1 MIC2_L 1 MIC PARAR 2 GND 2 GND 10 2 3 MIC2_R 3 MIC Power 4 ACZ_DET 4 NC 5 LINE2_R 5 Line Out R 6 GND 6 NC 7 FAUDIO_JD 7 NC 8 No Pin 8 No Pin 9 LINE2_L 9 Line Out L 10 GND 10 NC e Audio signals will be present on both of the front and back panel audio connections simultaneously e Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug For information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer SPDIF_O S PDIF Out Header This header supports digital S PDIF Out and connects a S PDIF digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards For example some graphics cards may require you to use a S PDIF digita
5. 4 ERR 17 PD7 i 2 C5 pot 18 GND 6 INIT 19 ACK 7 PD2 20 GND 8 SLIN 21 BUSY 9 PD3 22 GND 10 GND 23 PE 11 PD4 24 No Pin 12 GND 25 SLCT 13 PD5 26 GND 11 BAT Battery The battery provides power to keep the values such as BIOS configurations date and time information in the CMOS when the computer is turned off Replace the battery when the battery voltage drops to a low level or the CMOS values may not be accurate or may be lost You may clear the CMOS values by removing the battery 1 Turn off your computer and unplug the power cord 2 Gently remove the battery from the battery holder and wait for one minute Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 3 Replace the battery 4 Plug in the power cord and restart your computer e Replace the battery with an equivalent one Danger of explosion if the battery is replaced with i e Always turn off your computer and unplug the power cord before replacing the battery an incorrect model e Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model e When installing the battery note the orientation of the positive side and the negative side of the battery the positive side should face up e Used batteries must be handled in accordance with local environmental regula
6. lt Select Screen T4 Select Item wv Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Aptio Setup Utility Copyright C 2013 American Megatrends Inc Intel R Smart Connect Technology ISCT Support Enables or disables Intel Smart Connect Technology Default Disabled Super IO Configuration This section provides information on the super I O chip and allows you to configure the serial port and parallel port Serial Port 0 Configuration Serial Port 1 Configuration Serial Port Enables or disables the onboard serial ports Default Enabled Change Settings Allows you to configuration the IRQ settings for the serial ports This item is configurable only when Serial Port is set to Enabled Default Auto Parallel Port Configuration Parallel Port Enables or disables the onboard parallel port Default Enabled Change Settings Allows you to configuration the IRQ settings for the parallel port This item is configurable only when Parallel Port is set to Enabled Default Auto Device Mode Selects an operating mode for the onboard parallel LPT port This item is configurable only when Parallel Port is set to Enabled Options are Standard Parallel Port Mode Default EPP Mode Enhanced Parallel Port ECP Mode Extended Capabilities Port EPP Mode amp ECP Mode v ErP Determines whether to let the system consume least power
7. 12V 22 5V 11 12V Only for 2x12 pin 23 5V Only for 2x12 pin ATX ATX 12 3 3V Only for 2x12 pin 24 GND Only for 2x12 pin ATX ATX 3 4 CPU_FAN SYS_FAN Fan Headers The motherboard has a 3 pin CPU fan header CPU_FAN and a 4 pin system fan header SYS_FAN Most fan headers possess a foolproof insertion design When connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire The speed control function requires the use of a fan with fan speed control design For optimum heat dissipation it is recommended that a system fan be installed inside the chassis CPU_FAN SYS_FAN Pin No Definition Pin No Definition H 1 GND 1 GND i 2 Speed Control i 2 Speed Control eri 3 Sense Ton 3 Sense 4 VCC e Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating Overheating may result in damage to the CPU or the system may hang e These fan headers are not configuration jumper blocks Do not place a jumper cap on the headers 5 SATA2 0 1 SATA 3Gb s Connectors The SATA connectors conform to SATA 3Gb s standard and are compatible with SATA 1 5Gb s standard Each SATA connector supports a single SATA device SATA2 aja 1 1 Pin No Definition GND TXP TXN GND RXN RXP GND NN OD om BY wy NI gt 6 F_PANEL Front Panel Header Connect the power
8. Tien Dist New Taipei City 231 Taiwan TEL 886 2 8912 4000 FAX 886 2 8912 4005 Tech and Non Tech Support Sales Marketing http ggts gigabyte com tw WEB address English http www gigabyte com WEB address Chinese http Awww gigabyte tw You may go to the GIGABYTE website select your language in the language list on the top right corner of the website e GIGABYTE Global Service System GIGABYTE gons Global Technical Service To submit a technical or non technical Sales Marketing question please link to Welcome to GIGABYTE Service system If you area 3 P E plonso looin win your http ggts gigabyte com tw Then select your language to enter the system can simply enter E Mail address to login E FOr Fran ais Polski f Espa ol Ey
9. casing Do not place the computer system on an uneven surface Do not place the computer system in a high temperature environment Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user If you are uncertain about any installation steps or have a problem related to the use of the product please consult a certified computer technician 1 2 Product Specifications y CPU e Built in with an Intel Celeron Quad Core J1900 SoC 2 0 GHz d Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components 2 MB Cache amp Memory 2x 1 35V DDR3L DIMM sockets supporting up to 8 GB of system memory If only one DDR3L memory module is to be installed be sure to install it in the SODIMM_1 socket Dual channel memory architecture Support for DDR3L 1333 MHz memory modules Support for non ECC memory modules Go to GIGABYTE s website for the latest supported memory speeds and memory modules A Onboard Graphics Integrated in the SoC 1x D Sub port supporting a maximum resolution of 2560x1600 1x DVI D port supporting a maximum resolution of 1920x1080 The DVI D port does not support D Sub connection by adapter Audio Realtek ALC887 codec High Definition Audio 2 4 5 1 7 1 channel To configure 7 1 channel audio you have to use an HD front panel audio module and enable
10. switch reset switch and system status indicator on the chassis to this header according to the pin assignments below Note the positive and negative pins before connecting the cables Power Switch Power LED PLED Power LED Yellow System Status LED Connects to the power status indicator on the SO On chassis front panel The LED is on when the S3 S4 S5 Off system is operating The LED is off when the system is in 3 S4 sleep state or powered off S5 PW Power Switch Red Connects to the power switch on the chassis front panel You may configure the way to turn off your system using the power switch refer to Chapter 2 BIOS Setup Chipset for more information HD Hard Drive Activity LED Blue Connects to the hard drive activity LED on the chassis front panel The LED is on when the hard drive is reading or writing data RES Reset Switch Green Connects to the reset switch on the chassis front panel Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart NC Purple No connection The front panel design may differ by chassis A front panel module mainly consists of power switch reset switch power LED hard drive activity LED and etc When connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 7 8 9 F_AUDIO Front Panel Audio Header
11. E function a CPU power saving function in system halt state When enabled the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption This item is configurable only when CPU C state Report is enabled Default Enabled Max CPU C state Allows you to determine the maximum C state that the CPU will support Options include C7 C6 C1 default This item is configurable only when CPU C state Report is enabled Thermal Configuration DTS Enables or disables the CPU overheating protection function Default Disabled Critical Trip Point Allows you to set the CPU temperature threshold If the CPU temperature reaches this value the operating system will shut down the system This item is configurable only when DTS is enabled Default 100 C Passive Trip Point Allows you to set the CPU temperature threshold If the CPU temperature reaches this value the CPU frequency will be automatically reduced This item is configurable only when DTS is enabled Default 85 C IDE Configuration Serial ATA SATA Enables or disables the integrated SATA controllers Default Enabled SATA Mode Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode This item is configurable only when Serial ATA SATA is set to Enabled gt IDE Mode Configures the SATA controllers to IDE mode gt AHCI Mode Configures the SATA controllers to AHCI mode Advanced Host Cont
12. GA J1900N D3V User s Manual Rev 1001 12ME J190D3V 1001R Declaration of Conformity DECLARATION OF CONFORMITY eee Importer Per FCC Part 2 Section 2 1077 a G B T Technology Trading GMbH Address Bullenkoppel 16 22047 Hamburg Germany C Declare that the product Product Type Motherboard Product Name GA J1900N D3V Responsible Party Name G B T INC U S A conforms with the essential requirements of the following directives Address 17358 Railroad Street City of Industry CA 91748 I 2004 108 EC EMC Directive X Conduction amp Radiated Emissions EN 55022 2010 Phone Fax No 626 854 9338 626 854 9326 XX Immunity EN 55024 2010 hereby declares that the product KX Power line harmonics EN 61000 3 2 2006 A2 2009 Product Name Motherboard IX Power line flicker EN 61000 3 3 2008 Model Number GA J1900N D3V I 2006 95 EC LVD Directive Conforms to the following specifications X Safety EN60950 1 2006 A12 2011 FCC Part 15 Subpart B Section 15 107 a and Section 15 109 X 2011 65 EU RoHS Directive a Class B Digital Device XX Restriction of use of certain This product does not contain any of the restricted Supplementary Information substances in electronic equipment substances listed in Annex Il in concentrations r r i ia D This device complies with part 15 ofthe FCC Rules Operation is and applications banned by the directive E S subject to the following two conditions 1 This device
13. O ODODDDNDNDNDDODNDDN DONO DNDNDNDOODOONONOOD OONNnnonnon D gq gt 69 a So q P lt Box Contents MI GA J1900N D3V motherboard MI Motherboard driver disk Yl Two SATA cables vI User s Manual MI 1 0 Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain The box contents are subject to change without notice GA J1900N D3V Motherboard Block Diagram DDR3L 1333 MHz Dual Channel Memory Z A LAN Realteke Realteke Dual BIOS PCleCLK GbELAN GbE LAN ney SS J1900 SoC 100 MHz gt t _ 2 SATA 3Gb s Renesas a iG 4 USB 3 0 2 0 2 USB 2 0 1 1 LPC Bus iO 1 PCI Express Bus x1 n x1 PCle to PCI Bridge Mini PCI Express x1 PS 2 KB Mouse CODEC 1 PCI 4 ogogo s oO One PCI CLK ZSSS A 33 MHz DELFA Dnon Zc _ Same D S amp S Fe e X c 60 o FB For detailed product information limitation s refer to 1 2 Product Specifications _5 Chapter1 Hardware Installation 1 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge ESD Prior to installation carefully read the user s manual and follow these procedures Prior to installation make sure the chassis is suitable for the motherboard Prior to installation do not remove or break mot
14. a BIOS Setup program that allows the user to modify basic system configuration settings or to activate certain system features When the power is turned off the battery on the motherboard supplies the necessary power to the CMOS to keep the configuration values in the CMOS To access the BIOS Setup program press the lt Delete gt key during the POST when the power is turned on To upgrade the BIOS use the GIGABYTE BIOS utility which is a Windows based utility that searches and downloads the latest version of BIOS from the Internet and updates the BIOS e Because BIOS flashing is potentially risky if you do not encounter problems using the current version of BIOS it is recommended that you not flash the BIOS To flash the BIOS do it with caution Inadequate BIOS flashing may result in system malfunction e Itis recommended that you not alter the default settings unless you need to to prevent system instability or other unexpected results Inadequately altering the settings may result in system s failure to boot If this occurs try to clear the CMOS values and reset the board to default values Refer to the Restore Defaults section in this chapter or introductions of the battery clear CMOS jumper in Chapter 1 for how to clear the CMOS values 2 1 Startup Screen The following startup Logo screen will appear when the computer boots GIGABYTE 2 2 Main Once you enter the BIOS Setup program the Main Menu as shown below appe
15. agram cccccssseeesstessscrseerseeseeeeeen 5 Chapter 1 Hardware Installation ccccccccsscscsscsscsssecsscsssecsecessessssessessssessesesesssseseeees 6 11 TW STAN AVON Re CARON S sinnsir 6 12 POC i Ae ONS sinice a 7 13 Installing the Memory 5 aissascinscaceacticdssancaccuretsacxpnesesscadsasasuacedcaeecsgnsenceed aacsaasanee 9 1 4 Installing an Expansion Card s s snenenesnsisnsreinnennnesnsininnninnrsninininnnnrnrsrnrnenn 9 t9 Back Panel COMME CON Seciu aaa T a 9 tO Merna Connectors rvs secnaccecaseerearetecetznacsceeuacevasceeeseaseseseanesaseuiecacsenteacserlad 11 Chanter 2 BIOS SPUD sneren E a a a aE 17 21 Stanup Scree ee eee ne nee eee eee EEEE NK EE ER 17 e e E E E NE 18 ZO e E E al perehomneseah veutchaatbateapipeanhaaneMeraelsutdetesit 19 2 OID SC en o E EE EE O E 24 o O a E O verses eadesgs tare eenee ses 25 LO OD oiran E E T E 26 A 22 eee ee e EE 28 Chapter POS IN eisein aE EEE i 29 Drivers MS AN AMON eisiaa a aeaa a aaa 29 Regulatory StalemieNiS sssaaa 30 Salele AU EE E AAAA EA en Sena E EET E OE 32 Table of Contents GA J1900N D3V Motherboard Layout DEBUG _PORT CECE TIE LPT on T anc 12v SYS_FAN Bci B CLR_CMOS iTE Super I O CPU_FAN Intele J1900 SoC Realtek GbE LAN USB30_LAN2 Realtek GbE LAN Renesas uPD720210 USB30_LAN1 C SATA2 F_AUDIO SPDIF_O lola M_BIOS MINI PCIE 0 4 ID 8 C feiet pdt B_Bios Bridge BUZZER CODEC PCI E TORO H OO
16. are damage 1 5 Back Panel Connectors PS 2 Keyboard Mouse Port Use the upper port green to connect a PS 2 mouse and the lower port purple to connect a PS 2 keyboard Serial Port Use the serial port to connect devices such as a mouse modem or other peripherals D Sub Port The D Sub port supports a 15 pin D Sub connector and supports a maximum resolution of 2560x1600 the actual resolutions supported depend on the monitor being used Connect a monitor that supports D Sub connection to this port ie DVI D Port te The DVI D port conforms to the DVI D specification and supports a maximum resolution of 1920x1080 the actual resolutions supported depend on the monitor being used Connect a monitor that supports DVI D connection to this port Dual Display Configurations for the Onboard Graphics Dual display configurations are supported after you install motherboard drivers in OS but not during the BIOS Setup or POST process RJ 45 LAN Port The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate The following describes the states of the LAN port LEDs Connection Speed LED Activity LED Connection Speed LED Activity LED State Description State Description am mm Orange 1 Gbps data rate Blinking Data transmission or receiving is occurring umu Green 100 Mbps data rate Off No data transmission or receiving is occurring off 10 Mbps data rate LAN Port
17. ars on the screen Use arrow keys to move among the items and press lt Enter gt to accept or enter a sub menu Main Menu Help The on screen description of a highlighted setup option is displayed on the bottom line of the Main Menu Submenu Help While in a submenu press lt F1 gt to display a help screen General Help of function keys available for the menu Press lt Esc gt to exit the help screen Help for each item is in the Item Help block on the right side of the submenu Sample BIOS Version F1a e When the system is not stable as usual select the Restore Defaults item to set your system to its EB defaults e The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version Aptio Setup Utility Copyright C 2013 American Megatrends Inc Advanced Chipset Security Boot Save amp Exit BIOS Information BIOS ID 8A05AG06 Project Nate J1900N D3V BIOS Version Fia Build Date and Time 01 07 2014 21 17 27 Memory Information Total Memory 4096 MB LPDDR3 System Language English System Date Sun 01 07 2014 System Time 4 46 46 PM gt Select Screen T4 Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Access Level Aptio Setup Utility Copyright C 2013 American Megatrends Inc This section provides information on your motherboard model and BIOS version You can also select t
18. d If you wish to install a 3rd party add in audio card instead of using the onboard audio set this item to Disabled 24 High Precision Timer Enables or disables High Precision Event Timer HPET in the operating system Default Enabled Restore AC Power Loss Determines the state of the system after the return of power from an AC power loss gt gt Power Off The system stays off upon the return of the AC power Default gt Power On The system is turned on upon the return of the AC power gt gt Last State The system returns to its last known awake state upon the return of the AC power gt Soft Off by PWR BTTN Configures the way to turn off the computer in MS DOS mode using the power button gt gt Instant Off Press the power button and then the system will be turned off instantly Default gt gt Delay 4 Sec Press and hold the power button for 4 seconds to turn off the system If the power button is pressed for less than 4 seconds the system will enter suspend mode BIOS Read Write Protection Enables or disables BIOS read write protection Default Enabled 2 5 Security Aptio Setup Utility Copyright C 2013 American Megatrends Inc Main Advanced Chipset Security Boot Save amp Exit Password Description If ONLY the Administrator s password is set then this only limits access to Setup and is only asked for when entering Setup If ONLY the Administrator s password is set is a power
19. ed defaults after updating the BIOS or after clearing the CMOS values Save as User Defaults Save to current BIOS settings as user defined default settings Restore User Defaults Load the user define default settings for all BIOS options Boot Override Allows you to select a device to boot immediately Press lt Enter gt on the device you select and select Yes to confirm Your system will restart automatically and boot from that device Launch EFI Shell from filesystem device Allows you to launch the EFI Shell application shell efi from one of the available filesystem devices Press lt Enter gt on this option and the system will restart to the EFI Shell screen automatically 28 Chapter 3 Appendix Drivers Installation Windows 8 as the example operating system e After installing the operating system insert the motherboard driver disk into your optical drive Click on the message Tap to choose what happens with this disc on the top right corner of the screen and select Run Run exe Or go to My Computer double click the optical drive and execute the Run exe program CA Before installing the drivers first install the operating system The following instructions use After inserting the driver disk Xpress Install will automatically scan your system and then list all the drivers that are recommended to install You can click the Install All button and Xpress Install will install all the recommended drivers Or clic
20. he default language used by the BIOS and manually set the system time e System Language Selects the default language used by the BIOS e System Date Sets the system date The date format is week read only month date and year Use lt Tab gt to switch between the Month Date and Year fields and use the lt gt or lt gt key to set the desired value e System Time Sets the system time The time format is hour minute and second For example 1 p m is 13 0 0 Use lt Tab gt to switch between the Hour Minute and Second fields and use the lt gt or lt gt key to set the desired value e Access Level Displays the current access level depending on the type of password protection used If no password is set the default will display as Administrator The Administrator level allows you to make changes to all BIOS settings the User level only allows you to make changes to certain BIOS settings but not all 18 2 3 Advanced v v Aptio Setup Utility Copyright C 2013 American Megatrends Inc Advanced Chipset Security Boot Save amp Exit Intel R Smart Connect Technology Super IO Configuration H W Monitor CPU Configuration PPM Configuration Thermal Configuration IDE Configuration Network Stack Configuration CSM Configuration USB Configuration haa a a a a a a a a wv v Realtek PCle GBE Family Controller MAC 00 00 00 00 00 03 Realtek PCle GBE Family Controller MAC 00 00 00 00 00 03 gt
21. herboard S N Serial Number sticker or warranty sticker provided by your dealer These stickers are required for warranty validation Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components When connecting hardware components to the internal connectors on the motherboard make sure they are connected tightly and securely When handling the motherboard avoid touching any metal leads or connectors It is best to wear an electrostatic discharge ESD wrist strap when handling electronic components such as a motherboard CPU or memory If you do not have an ESD wrist strap keep your hands dry and first touch a metal object to eliminate static electricity Prior to installing the motherboard please have it on top of an antistatic pad or within an electrostatic shielding container Before unplugging the power supply cable from the motherboard make sure the power supply has been turned off Before turning on the power make sure the power supply voltage has been set according to the local voltage standard Before using the product please verify that all cables and power connectors of your hardware components are connected To prevent damage to the motherboard do not allow screws to come in contact with the motherboard circuit or its components Make sure there are no leftover screws or metal components placed on the motherboard or within the computer
22. idelines before connecting external devices e First make sure your devices are compliant with the connectors you wish to connect e Before installing the devices be sure to turn off the devices and your computer Unplug the power cord from the power outlet to prevent damage to the devices e After installing the device and before turning on the computer make sure the device cable has been securely attached to the connector on the motherboard 11 1 2 ATX_12V ATX 2x2 12V Power Connector and 2x12 Main Power Connector With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard Before connecting the power connector first make sure the power supply is turned off and all devices are properly installed The power connector possesses a foolproof design Connect the power supply cable to the power connector in the correct orientation The 12V power connector mainly supplies power to the CPU If the 12V power connector is not connected the computer will not start loVeyvetetefeyelefefeyelel 2 0O0OCOOOCOOOONJE eA ig ATX_12V ATX ATX_12V ATX Pin No Definition Pin No Definition Pin No Definition 1 GND 1 3 3V 13 3 3V 2 GND 2 3 3V 14 12V 3 12V 3 GND 15 GND 4 12V 4 5V 16 PS_ON soft On Off 5 GND 17 GND 6 5V 18 GND 7 GND 19 GND 8 Power Good 20 5V 9 5VSB stand by 5V 21 5V 10
23. in S5 shutdown state Default Disabled Note When this item is set to Enabled the following functions will become unavailable PME event wake up power on by mouse power on by keyboard and wake on LAN Case Open Displays the detection status of the chassis intrusion detection device attached to the motherboard Cl header If the system chassis cover is removed this field will show Open otherwise it will show Close To clear the chassis intrusion status record set Reset Case Open Status to Enabled save the settings to the CMOS and then restart your system Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status Default gt gt Enabled Clears the record of previous chassis intrusion status and the Case Open field will show Close at next boot H W Monitor CPU Temperature DTS System Temperature Displays current CPU system temperature CPU System Fan Speed Displays current CPU system fan speed Vcore VCC3 12V VCC CPU_VAXG 3VDUAL DDR1_35VIO Displays the current system voltages CPU Configuration Socket 0 CPU Information This section provides information on your CPU frequency and cache memory Active Processor Cores Allows you to determine whether to enable all CPU cores Default All Limit CPUID Maximum Allows you to determine whether to limit CPUID maximum value Set this item to Disabled for Windows XP operating system set this item to Enabled for legacy
24. interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult a dealer or experienced TV radio technician for help Canada Industry Canada IC Notices Canada avis d Industry Canada IC This Class B digital apparatus complies with Canadian ICES 003 and RSS 210 Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Cet appareil num rique de classe B est conforme aux normes canadiennes ICES 003 et RSS 210 Son fonctionnement est soumis aux deux conditions suivantes 1 cet appareil ne doit pas causer d interf rence et 2 cet appareil doit accepter toute interference notamment les interf rences qui peuvent affecter son fonctionnement aTa Contact Us GIGA BYTE TECHNOLOGY CO LTD Address No 6 Bao Chiang Road Hsin
25. k Install Single Items to manually select the drivers you wish to install 29 Regulatory Statements Regulatory Notices This document must not be copied without our written permission and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose Contravention will be prosecuted We believe that the information contained herein was accurate in all respects at the time of printing GIGABYTE cannot however assume any responsibility for errors or omissions in this text Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE Our Commitment to Preserving the Environment In addition to high efficiency performance all GIGABYTE motherboards fulfill European Union regulations for RoHS Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment and WEEE Waste Electrical and Electronic Equipment environmental directives as well as most major worldwide safety requirements To prevent releases of harmful substances into the environment and to maximize the use of our natural resources GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your end of life product Restriction of Hazardous Substances RoHS Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances Cd Pb Hg Cr 6 PBDE a
26. l audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an HDMI display to the graphics card and have digital audio output from the HDMI display at the same time For information about connecting the S PDIF digital audio cable carefully read the manual for your expansion card ER e The front panel audio header supports HD audio by default Pin No Definition o 1 SPDIFO 1 3 GND F_USB USB 2 0 1 1 Header The header conforms to USB 2 0 1 1 specification Each USB header can provide two USB ports via an optional USB bracket For purchasing the optional USB bracket please contact the local dealer Pin No Definition Pin No Definition 1 32 1 Power 5V 6 USBDY 2 Power 5V 7 GND 9 10 3 USBDX 8 GND 4 USBDY 9 No Pin 5 USBDX 10 NC e Do not plug the IEEE 1394 bracket 2x5 pin cable into the USB 2 0 1 1 header e Prior to installing the USB bracket be sure to turn off your computer and unplug the power cord from the power outlet to prevent damage to the USB bracket 14 10 LPT Parallel Port Header The LPT header can provide one parallel port via an optional LPT port cable For purchasing the optional LPT port cable please contact the local dealer Pin No Definition Pin No Definition 1 STB 14 GND 25 1 2 AFD 15 PD6 ERRREERRROCERI E mi D
27. m fan speed control Whether the fan speed control function is supported will depend on the cooler you install BIOS 2x64 Mbit flash ma Use of licensed AMI UEFI BIOS Support for DualBIOS PnP 1 0a DMI 2 0 SM BIOS 2 6 ACPI 2 0a Unique Features Support for BIOS Support for Xpress Install Support for APP Center Available applications in APP Center may differ by motherboard model Supported functions of each application may also differ depending on motherboard specifications Support for ON OFF Charge H Bundled Norton Internet Security OEM version Software Intel Smart Connect Technology SFO TE Support for Windows 8 1 8 64 bit ystem e Mini ITX Form Factor 17 0cm x 17 0cm fim Form Factor GIGABYTE reserves the right to make any changes to the product specifications and product related information without prior notice Please visit the Support amp Downloads Utility page on GIGABYTE s website to check the supported operating system s for the software listed in the Unique Features and Bundled Software columns 1 3 Installing the Memory Read the following guidelines before you begin to install the memory A e Make sure that the motherboard supports the memory It is recommended that memory of the same capacity brand speed and chips be used Go to GIGABYTE s website for the latest supported memory speeds and memory modules e Always turn off the computer and unplug the power co
28. may not X CE marking cause harmful and 2 this device must accept any inference received including that may cause undesired operation Representative Person s Name ERIC LU Signature Eric Lu Signature Timmy Huang Date Jan 3 2014 Stamp Date Jan 3 2014 Name Timmy Huang Copyright 2014 GIGA BYTE TECHNOLOGY CO LTD All rights reserved The trademarks mentioned in this manual are legally registered to their respective owners Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice No part of this manual may be reproduced copied translated transmitted or published in any form or by any means without GIGABYTE s prior written permission m In order to assist in the use of this product carefully read the User s Manual m For product related information check on our website at http www gigabyte com Identifying Your Motherboard Revision The revision number on your motherboard looks like this REV X X For example REV 1 0 means the revision of the motherboard is 1 0 Check your motherboard revision before updating motherboard BIOS drivers or when looking for technical information Example GA J1900N D3V Motherboard Layout cccessssesssscssesssessseecsssecesseessersaseesesen 4 GA J1900N D3V Motherboard Block Di
29. nd PBB The parts and components have been carefully selected to meet RoHS requirement Moreover we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals Waste Electrical amp Electronic Equipment WEEE Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2002 96 EC WEEE Waste Electrical and Electronic Equipment directive The WEEE Directive specifies the treatment collection recycling and disposal of electric and electronic devices and their components Under the Directive used equipment must be marked collected separately and disposed of properly WEEE Symbol Statement The symbol shown below is on the product or on its packaging which indicates that this product psa must not be disposed of with other waste Instead the device should be taken to the waste collection centers for activation of the treatment collection recycling and disposal procedure The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste equipment for recycling please contact your local government office your household waste disposal service or where you purchased the product for details of environmentally safe recycling When your electrical or electro
30. nic equipment is no longer useful to you take it back to your local or regional waste collection administration for recycling f you need further assistance in recycling reusing in your end of life product you may contact us at the Customer Care number listed in your product s user s manual and we will be glad to help you with your effort Finally we suggest that you practice other environmentally friendly actions by understanding and using the energy saving features of this product where applicable recycling the inner and outer packaging including shipping containers this product was delivered in and by disposing of or recycling used batteries properly With your help we can reduce the amount of natural resources needed to produce electrical and electronic equipment minimize the use of landfills for the disposal of end of life products and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly 30 FCC Notice U S A Only This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful
31. oller Enabled Realtek LAN 2 Controller Enabled gt North Bridge gt South Bridge gt lt Select Screen T4 Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Aptio Setup Utility Copyright C 2013 American Megatrends Inc lt Realtek LAN Controller Realtek LAN 2 Controller Enables or disables the onboard LAN function Default Enabled If you wish to install a 3rd party add in network card instead of using the onboard LAN set this item to Disabled North Bridge This section provides information on the installed memory size and memory onboard graphics related configuration options Intel IGD Configuration This section provides onboard graphics related configuration options Graphics Power Management Control This section provides power saving configuration options for the onboard graphics MAX TOLUD Allows you to configure the maximum TOLUD value Default Dynamic South Bridge USB Configuration This section provides you with configuration options for the USB controller such as enabling disabling a specific USB port and support for certain features PCI Express Configuration This section provides you with configuration options for the PCI Express bus such as enabling disabling a specific PCI Express channel and speed configuration Audio Controller Enables or disables the onboard audio function Default Enable
32. on password and must be entered to boot or enter Setup In Setup the User will have Administrator rights The password length must be in the following range Minimum length gt Maximum length Select Screen T4 Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Administrator Password User Password gt Secure Boot menu Aptio Setup Utility Copyright C 2013 American Megatrends Inc Administrator Password Allows you to configure an administrator password Press lt Enter gt on this item type the password and then press lt Enter gt You will be requested to confirm the password Type the password again and press lt Enter gt You must enter the administrator password or user password at system startup and when entering BIOS Setup Differing from the user password the administrator password allows you to make changes to all BIOS settings User Password Allows you to configure a user password Press lt Enter gt on this item type the password and then press lt Enter gt You will be requested to confirm the password Type the password again and press lt Enter gt You must enter the administrator password or user password at system startup and when entering BIOS Setup However the user password only allows you to make changes to certain BIOS settings but not all 25 To cancel the password press lt Ente
33. operating system such as Windows NT4 0 Default Disabled Execute Disable Bit Enables or disables Intel Execute Disable Bit function This function may enhance protection for the computer reducing exposure to viruses and malicious buffer overflow attacks when working with its supporting software and system Default Enabled Hardware Prefetcher Enables or disables L2 Cache Hardware Prefetcher Default Enabled Adjacent Cache Line Prefetch Enables or disables L2 prefetching of adjacent cache lines Default Enabled Intel Virtualization Enables or disables Intel Virtualization Technology Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions With virtualization one computer system can function as multiple virtual systems Default Enabled Power Technology Allows you to configure Intel power management features Default Energy Efficient 20 v v v PPM Configuration EIST Enables or disables Enhanced Intel Speed Step Technology EIST Depending on CPU loading Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production Default Enabled CPU C state Report Enables or disables support for CPU s power saving functions Default Enabled Enhanced C state Enables or disables Intel CPU Enhanced Halt C1
34. r gt on the password item and when requested for the password enter the correct one first When prompted for a new password press lt Enter gt without entering any password Press lt Enter gt again when prompted to confirm HDD Security Configuration Displays a list of connected hard drives and allows you to set a password for a specific hard drive This item appears only when a hard drive is installed Secure Boot menu System Mode Displays the current system mode Secure Boot Displays the current secure boot state Secure Boot Enables or disables the secure boot function Secure Boot requires all the applications that are running during the booting process to be pre signed with valid digital certificates This way the system knows all the files being loaded before Windows 8 loads and gets to the login screen have not been tampered with Default Disabled Secure Boot Mode Allows you to configure the secure boot mode Default Custom Key Management This section provides you with configuration options for secure boot key management 2 6 Boot Aptio Setup Utility Copyright C 2013 American Megatrends Inc Main Advanced Chipset Security Save amp Exit Boot Configuration Setup Prompt Timeout 6 Bootup NumLock State On Full Screen LOGO Show Enabled Quick Boot Disabled Boot Option Priorities Boot Option 1 VERMUSB2 0ER Boot Option 1 UERBUSB 20 Eee gt lt Select Screen T4 Select Item Enter Selec
35. rd from the power outlet before installing the memory to prevent hardware damage e Memory modules have a foolproof design A memory module can be installed in only one direction If you are unable to insert the memory switch the direction Dual Channel Memory Configuration This motherboard provides two DDR3L memory sockets and supports Dual Channel Technology After the memory is installed the BIOS will automatically detect the specifications and capacity of the memory The two DDR3L memory sockets are divided into two channels and each channel has one memory socket as following gt Channel A SODIMM_1 gt Channel B SODIMM_2 Due to SoC limitations read the following guidelines before installing the memory in Dual Channel mode 1 If only one DDR3L memory module is to be installed be sure to install it in the SODIMM_1 socket and Dual Channel mode cannot be enabled if only one memory module is installed 2 When enabling Dual Channel mode with two memory modules it is recommended that memory of the same capacity brand speed and chips be used for optimum performance 1 4 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card A e Make sure the motherboard supports the expansion card Carefully read the manual that came with your expansion card e Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardw
36. roller Interface AHCI is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug Default Serial ATA Port 0 Serial ATA Port 1 Enables or disables each SATA port This item is configurable only when Serial ATA SATA is set to Enabled The area below displays the current status of each SATA port Default Enabled 21 v v Network Stack Configuration Network Stack Disables or enables booting from the network to install a GPT format OS such as installing the OS from the Windows Deployment Services server Default Disabled lpv4 PXE Support Enables or disables IPv4 PXE Support This item is configurable only when Network Stack is enabled Ipv6 PXE Support Enables or disables IPv6 PXE Support This item is configurable only when Network Stack is enabled CSM Configuration CSM Support Enables or disables UEFI CSM Compatibility Support Module to support a legacy PC boot process gt Enabled Enables UEFI CSM Disabled Disables UEFI CSM and supports UEFI BIOS boot process only Default Boot option filter Allows you to select which type of operating system to boot gt gt UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI option ROM Default gt gt Legacy only Allows booting from operating systems that only support legacy option ROM gt gt UEFI only Allows booting from opera
37. t Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Hard Drive BBS Priorities Aptio Setup Utility Copyright C 2013 American Megatrends Inc 26 Setup Prompt Timeout Allows you to configure the number of seconds to stay in BIOS setup prompt screen Default 6 Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST Default On Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup Disabled skips the GIGABYTE Logo when the system starts up Default Enabled Fast Boot Enables or disables Fast Boot to shorten the OS boot process Default Disabled VGA Support Allows you to select which type of operating system to boot gt gt Auto Enables legacy option ROM only gt gt EFI Driver Enables EFI option ROM Default This item is configurable only when Fast Boot is set to Enabled USB Support gt gt Disabled All USB devices are disabled before the OS boot process completes gt gt Full Initial All USB devices are functional in the operating system and during the POST gt gt Partial Initial Part of the USB devices are disabled before the OS boot process completes Default This item is configurable only when Fast Boot is set to Enabled PS2 Devices Support gt gt Disabled All PS 2 devices are disabled before the OS boot process completes
38. tc Press lt Enter gt on this item to enter the submenu that presents the devices of the same type that are connected This item is present only if at least one device for this type is installed IT 2 7 Save amp Exit Aptio Setup Utility Copyright C 2013 American Megatrends Inc Main Advanced Chipset Security Boot Save amp Exit Save Changes and Reset Save Changes and Reset Restore Defaults Save as User Defaults Restore User Defaults Boot Override UEFI USB 2 0 USB Flash Drive 0 00 UEFI Built in EFI Shell Launch EFI Shell from filesystem device gt lt Select Screen T4 Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Aptio Setup Utility Copyright C 2013 American Megatrends Inc Save Changes and Reset Press lt Enter gt on this item and select Yes This saves the changes to the CMOS and exits the BIOS Setup program Select No or press lt Esc gt to return to the BIOS Setup Main Menu Discard Changes and Reset Press lt Enter gt on this item and select Yes This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS Select No or press lt Esc gt to return to the BIOS Setup Main Menu Restore Defaults Press lt Enter gt on this item and select Yes to load the BIOS factory default settings The BIOS defaults settings help the system to operate in optimum state Always load the Optimiz
39. the multi channel audio feature through the audio driver Support for S PDIF Out LAN Expansion Slots 2 x Realtek GbE LAN chips 10 100 1000 Mbit 1 x PCI slot 1 x Mini PCI Express x1 slot This socket does not support USB Bluetooth signals The Mini PCI Express slot conforms to PCI Express 2 0 standard Storage Interface Integrated in the SoC 2 x SATA 3Gb s connectors K USB Integrated in the SoC 2 x USB 2 0 1 1 ports available through the internal USB header SoC Renesas uPD720210 USB 3 0 Hub 4x USB 3 0 2 0 ports on the back panel gE Internal goe Connectors 1 x 24 pin ATX main power connector 1 x 4 pin ATX 12V power connector 2 x SATA 3Gb s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x S PDIF Out header 1 x USB 2 0 1 1 header Internal e 1x parallel port header Connectors 1 x Clear CMOS jumper e 1x chassis intrusion header 1x debug card header os Back Panel e 1x PS 2 keyboard port Connectors 1xPS 2 mouse port e 1x D Sub port 1x DVI D port e 2x serial ports 4 x USB 3 0 2 0 ports 2xRJ 45 ports e 3x audio jacks Line In Line Out Mic In P 1 0 Controller iTE I O Controller Chip Hardware System voltage detection Monitor e CPU System temperature detection CPU System fan speed detection e CPU Syste
40. ting systems that only support UEFI option ROM This item is configurable only when CSM Support is set to Enabled Network Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller gt gt Do not launch Disables option ROM gt UEFI only Enables UEFI option ROM only Default gt gt Legacy only Enables legacy option ROM only gt gt Legacy first Enables legacy option ROM first gt gt UEFI first Enables UEFI option ROM first This item is configurable only when CSM Support is set to Enabled Storage Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller gt gt Do not launch Disables option ROM gt UEFI only Enables UEFI option ROM only Default gt Legacy only Enables legacy option ROM only gt gt Legacy first Enables legacy option ROM first gt gt UEFI first Enables UEFI option ROM first This item is configurable only when CSM Support is set to Enabled Video Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller gt gt Do not launch Disables option ROM gt gt UEFI only Enables UEFI option ROM only gt Legacy only Enables legacy option ROM only gt Legacy first Enables legacy option ROM first Default gt gt UEFI first Enables UEFI option ROM first This item is configurable only when CSM Support is set to Enabled 22 CP v Other PCI devices
41. tions 12 CLR_CMOS Clear CMOS Jumper Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults To clear the CMOS values use a metal object like a screwdriver to touch the two pins for a few seconds a Open Normal a Short Clear CMOS Values e After system restart go to BIOS Setup to load factory defaults select Load Optimized Defaults or manually configure the BIOS settings refer to Chapter 2 BIOS Setup for BIOS configurations fi e Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values 13 Cl Chassis Intrusion Header This motherboard provides a chassis detection feature that detects if the chassis cover has been removed This function requires a chassis with chassis intrusion detection design Pin No Definition Signal 1 3 2 GND 14 DEBUG PORT Debug Card Header This header can connect a debug card Pin No Definition Pin No Definition 1 No Pin 7 LAD3 2 12 2 GND 8 LFRAME 1 GRABER 11 3 VCC3 9 PFMRST 4 LADO 10 DB CLK 5 LAD 11 DB_P_SENSOR 6 LAD2 12 NC 16 Chapter 2 BIOS Setup BIOS Basic Input and Output System records hardware parameters of the system in the CMOS on the motherboard Its major functions include conducting the Power On Self Test POST during system startup saving system parameters and loading operating system etc BIOS includes
Download Pdf Manuals
Related Search