Home
        Xit XTCG60D
         Contents
1.                                    ltem   XTCG60D    Multi power Battery Pack  User   s Manual    designed for          PHOTO    capture the spot     PART NAMES    1  Protective cover   2  Electrical contacts   3  Attachment screw   4  Guide pin   5  Attach detach knob   6  Battery magazine release handle   7  DC cord mount   8  AF point selection Magnify button   9  AE lock FE lock Index Reduce button   10  AF start button   11  Vertical grip operation switch   12  Shutter button   13  Camera battery compartment cover slot  14  Main dial   15  Hand strap mount   16  Tripod socket   17  Battery chamber latch   18  Battery pack compartment   19  Battery magazine  for size AA batteries           The XTCG60D is a battery grip that can hold two battery pack  LP E6 or six AA batteries  it is also equipped with a vertical grip  shutter button  main dial  etc to enable shooting in the same way  as with horizontal grip     USING THE BATTERY GRIP   1  Turning the vertical grip operation switch to  lt ON gt   Fig 12   makes the battery grip buttons and dial function in the  same way as those on the camera     2  When shooting in the horizontal grip position  turn the    ATTACHING TO THE CAMERA    1  Remove the battery from the camera   Fig  1    2  Pull out the camera   s battery compartment cover a slanted  angle to detach   Fig  2   Perform the operation on a table so as not to drop the  camera    3  Insert the detached cover into its storage slot to ensure that  it will not be lost 
2.   Fig 3   When taking out the cover  press lightly on the cover hinge  and pull it out upward at a slanted angle   Fig 3 2    4  Remove the protective cover  and then insert the electrical  contacts into the camera battery compartment   Fig 4 1    5  Align the attachment screw with the camera   s tripod socket   And then turn the attach detach knob to tighten securely    Fig  4 1     SPECIFICATIONS    Battery    Power switch  Possible shots    Working temperature  range    Working humidity    e Do not further push open the battery compartment cover when  it is already open  doing so may damage its hinge    e Be sure to attach the battery grip to the camera before inserting  the batteries  The results of the battery check may not be  displayed properly if you attach the battery grip to the camera    Dimensions    with the batteries already inside    e Before removing the battery grip from the camera  make sure to  turn the camera   s power switch to  lt OFF gt   and take out the  batteries  After removing the batteries  attach the protective  cover to the electrical contacts        INSTALLING THE BATTERY PACKS    1  After flipping out the release handle  turn it as shown by the  arrow  Then pull out the battery magazine  for size AA LR6  batteries    Fig  5    2  Insert one or two battery pack LP E6 into the battery  magazine  for LP E6   Fig  6    3  Attach the battery magazine into the battery grip   Fig  7 1   After attaching  check that the battery magazine is securely  at
3. el can be checked on the camera     1  One or two battery packs LP E6  2  Six size AA alkaline batteries    Camera   s power switch    Refer to your camera   s instruction manual    0  C     40  C   32  F   104  F    85  or less    Approx  145 6  W  x 111 3  H  x 85 3  D  mm  Approx  5 7  W  x 4 4  H  x 3 4  D  in    Approx  295g   10 402  without batteries and battery  magazine        
4. tached to the battery grip    4  Close the release handle   Fig  7 2     e If only one battery pack is used  it can be inserted in either the  right or left side    e If two battery packs are inserted  power is supplied  simultaneously by both battery packs  Two battery packs with    different charging levels can be inserted and used without any  problems    e Remove the battery packs or size AA batteries from the battery  grip when the camera will not be used for an extended period        INSTALLING SIZE AA BATTERIES    1  Insert the batteries onto the battery magazine  for size AA  batteries    Fig  8    Make sure the   and   battery contacts are properly  oriented as shown in the illustration    2  Attach the battery magazine into the battery grip   Fig  9 1   After attaching  check that the battery magazine is  securely attached to the battery grip    3  Close the release handle   Fig  9 2     e Fewer images can be shot when using size AA batteries  Also  the  number of possible shots may vary depending on the batteries  brand and storage conditions  So age of size AA batteries is  recommended only for emergencies    e With size AA batteries  use six new batteries of the same brand at    temperature above 20  C   68  F  the camera may not function when  used in lower temperature or when old and new batteries are used  together     vertical grip operation switch to  lt OFF gt  so that you do not  accidentally use the buttons or dial on the battery grip   3  The battery lev
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Production Engineering  Manuale Installazione e Programmazione    34600_Fiche Ombralgo  Forbes Nectar User manual for pdf  Dimplex FX 20V User's Manual  4. 魅力あふれるユーザーインタフェース  Reproductor de Disco Blu-ray™/DVD  Typhoon 24 in 1 Card reader USB 2.0    Copyright © All rights reserved. 
   Failed to retrieve file