CAD Audio U37 microphone
Contents
1. Locate the Preferences in your audio program and select the C Media USB Audio Device Adjust the input level in this program so that the audio signal is strong but not distorted 15 Enjoy your CAD U37 USB Studio Recording Microphone CAD Professional Microphones 6573 Cochran Rd Bldg I Solon OH 44139 800 762 9266 www cadmics com NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio commu nications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Two Year Limited Warranty CAD Professional Microphones hereby warrants that this product will be free of defects in material and workman ship for a period of two years from the date of purchase In the unlikely event that a defect occurs CAD will at its option either repair or replace with a new unit of equal or greater value Retain proof of purchase to validate the purchase date and return it with any warranty claim Return warranty claims carefull2. U37 USB Studio Recording Microphone The U37 is a side address microphone When recording speak or play into the side of the mic that has the CAD logo The U37 has two switches on the front The rst switch allows you to decrease the sensitivity of the microphone so the sound quality is clear for extremely loud sounds For example the switch should be in the 10 position for loud voices percussion and other high sound pressure level devices The 0 position should be used for normal voices and string instruments If the recording is unclear or distorted set the switch to 10 and re record The second switch on the U37 is designed to reduce pickup of deep bass sounds The switch should be in the Normal Bass mode in most cases However if you want to remove wind noise ventilation noise or decrease the low frequencies in a recording the switch should be in the Bass Reduction position Normal Bass Bass Reduction Bass settings Before using the U37 in your favorite audio or communications application you must con rm that the computer s operating system recognizes the U37 Windows XP recognition instructions 1 Plug the U37 into the USB port on the computer When using a USB hub check with the hub manufacturer to be sure the hub supports a device such as a microphone Plug the U37 directly into the computer s powered USB port for optimal performance 2 Allow 30 to 60 seconds for the sy
3. into the USB port on the computer When using a USB hub check with the hub manufacturer to be sure the hub supports a device such as a microphone Plug the U37 directly into the computer s powered USB port for optimal performance 2 Allow 30 to 60 seconds for the system software to recognize the U37 3 Go to the Apple Menu and locate System Preferences 4 Under Hardware click on the Sound icon 5 Click on the Input button and choose the C Media USB Audio Device 6 Click on the Output button and choose the internal speakers or the output speakers of your choice The Sound playback should remain your usual sound output device 7 Position the U37 4 to 6 inches away from your source your mouth or music instrument 8 Test the U37 by speaking or playing into the microphone 2007 CAD Professional Microphones Part No 64512 25 00 Oct2007 9 You will see activity in the Input Level meter 10 As you are speaking or playing adjust the Input Volume slider Take care not to allow the signal to go beyond the meter if the meter is fully illuminated the sound can become distorted The meter should be illuminated 3 4ths of the way to obtain the best sound quality 11 Close the System Preferences window to complete the settings 12 Launch your audio recording software 13 Position the U37 approximately 4 to 6 inches from the sound source for best results 14
4. stem software to recognize the U37 A series of bubbles will appear by the Windows toolbar to notify you of a new device 3 In the Start Menu select Control Panel 4 Select Sounds Speech and Audio Devices 5 Select Sounds and Audio Devices 6 Select the Audio tab Con rm that under the Sound recording section the C Media USB Audio Device is selected The Sound playback should remain your usual sound output device 7 Select the Volume tab under the Sound recording heading and select Advanced Controls in the Options menu of this window 8 Click the Advanced button to open the Advanced Controls for Wave In window Depending upon your system you might have the option of selecting 1 AGC or Mic boost Checking this option will signi cantly increase the sensitivity of the microphone Use this for recording softer sounds If you experience distortion when recording louder sounds try unchecking this option 9 Launch your audio recording software 10 Position the U37 approximately 4 to 6 inches from the sound source for best results 11 Locate the preferences in your audio program and select the C Media USB Audio Device Adjust the input level in this program so that the audio signal is not distorted 12 Enjoy your CAD U37 USB Studio Recording Microphone Default playback device Mac OSX recognition instructions 1 Plug the U37
5. y packed insured and prepaid to the Service Department at the address listed below This warranty excludes exterior nish or appearance damage from abuse misuse of the product use contrary to CAD s instructions or unauthorized repair All implied warranties merchantability or tness for a particular purpose is hereby disclaimed and CAD hereby disclaims liability for incidental special or consequential damages resulting from the use or unavailability of this product This warranty gives you speci c legal rights and you may have other rights that vary from state to state Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions and limitations may not apply to you Note No other warranty written or oral is authorized by CAD Professional Microphones Shipping Instructions Please call our customer service department at 440 349 4900 for a pre approved return authorization number Carefully repack the unit and return it to CAD Professional Microphones 6573 Cochran Road Building I Solon Ohio 44139 RETURNS WITHOUT A PRE APPROVED RETURN AUTHORIZATION NUMBER WILL BE REFUSED If outside the United States contact your local dealer or distributor for warranty details
Download Pdf Manuals
Related Search