Home

Philips 24PFL1335 24" HD-ready Black

1. Sound without Image e Check if the image setting is correct Poor signal receiving may be caused byimproper antenna connection e Check if the antenna has been connected with the TV properly e The receiving quality may be affected by loudspeakers audio device without grounding neon light high rise buildings and other massive objects If possible please try to change the antenna direction or keep the said devices away from the TV to improve the receiving quality e In case of poor receiving quality in only one channel please make a fine tuning for this channel Poor image qualityfor devices connected e Check if the device is properly connected e Check if the image setting is correct Image setting not saved e Check if the TV setting has been set to Home Mode You can change and save settings flexibly in this mode Image Size does not fit the Screen e Try to use another aspect ratio for image Improper image position e The image signal from certain devices may not fit the screen Please check the signal output of the device Audio Troubles Image without sound EN 24 Notice f no audio signal can be detected the TV will disable the audio output automatically which doesn t mean trouble e Check if all cables are connected properly Check if the volume is set to 0 Check if the sound is muted Image with poor sound quality Chec
2. interface with the component audio HDMI Digital audio and video input of HD digit al devices like a Blu ray player AV Input Composite video input of analog devices like a VCR AV Out Composite video output of analog devices like a VCR 3 Antenna cable TV Signal input from antenna cable or satellite AV Out Antenna cable TV HH Connect toa device with audio input interface such as a monitor 4 HDMI D Digital audio and video input of HD digital devices like a Blu ray player Homi Interface on the side USB Connect to USB storage device me g i Headset Stereo audio output to headset Note When you insert the headset the TV speakers will be muted automatically EN 19 e HDMI Cable and HDMI DVI Adaptor Connect to PC Connect the TV to a PC e Set the refresh rate to 60Hz on the PC e Select a supported resolution Connect to the PC via one of the following interfaces Note e An extra audio cable is needed when connecting via DVI or VGA e VGA Cable e HDMI Cable EN 20 Use of Philips EasyLink To obtain the best performance it is suggested to use the Philips EasyLink HDMI CEC compatible devices which can enhance the con
3. or remove the back housing of the TV to expose the inside Repairs should be referred to Philips customer service center and official repair store or both the expressed and implied warranty will be void All operations that are prohibited expressly and al adjustment or assembly steps that are not recommended or authorized in this Manual shall fall out of the scope of the warranty Copyright All other registered and unregistered trademarks shall remain the property of their owner Kensington and Micro Saver are the trademarks registered in America and registered or being registered in other countries and regions by ACCO World Corporation Copyright of the software of this product The Free Type Project www freetyp org HUM HIGH DEFINITION MULTIMEDIA INTERFACE HDMI HIGH DEFINITION MULTIMEDIA INTERFACE The name HDMI HDMI logo and high definition multimedia interface are the trademarks or registered trademarks of HDMI Licensing LLC The name Philips and the Philips shield mark are the registered trademarks of Koninklijke Philips Electronics N V and should not be used by any person without the authorization of Koninklijke Philips Electronics N V 2 Important Information Please read and understand this Manual carefully before using this TV Damages caused by failure to follow this Manual shall fall out of the scope of the warranty e EN 2 Safety Danger Electri
4. the J key during the video playing select one of the following options and then press the OK key e Start Stop start or stop playing EN e Play Once Repeat select to play the videos once or repeat playing them e Random Play select to play the videos in sequence or at random e Aspect Ratio select the image format for video playing e Details display the detailed information Remove the USB Storage Device E Note e Please follow the steps below to remove the USB storage device or it could be damaged 1 Press the 5 key to exit the USB browser 2 Remove the USB storage device about 5s later 6 Set up the Channels When you make TV settings for the first time you need to select a menu language and search for TV channels This Chapter will explain how to search and fine tune the channels Auto Scan Step 1 Select a menu language 1 Press the Menu key 2 Select Setup gt Options gt Menu Language and then press gt to enter 3 Select your desired language Step 2 Channel auto scan 1 Press the Menu key 2 Select Setup gt Channel gt Auto Scan and then press to enter 3 Press the OK key to start the auto scan Manual Scan Step 1 Select your TV system Es Note e f your system has been set correctly you can skip this step 1 Press the Menu key 2 Select Setup gt Channel 3 Select your Col
5. Register your products and get support at 1335 Series www philips com welcome 24PFL1335 User Manual PHILIPS Contents 1 Announcement 2 Important Information N 3 Product Introduction Control Panel Remote Control Use the Remote Control 4 Use the TV Switch to Standby Mode Switch the Channel View Connected Devices Adjust the Volume Oo 0 ONNIN DWM 5 Other Functions Access the TV Menu Change the Language Change the Image and Sound Settings Use the Smart P Mode Adjust the Picture Settings Manually Aspect Ratio Use the Smart Sound Use the Sleep Timer Use the Lock Function Set or Change the Password Lock Unlock Channels Play USB Media 6 Set up the Channels Auto Scan Manual Scan Channel Edit Change the Other Settings Oo S So d Sa NNN O BR BRwWW WN MN A gt Oo OO OO 7 Connect Devices nterfaces on the back nterface on the side Connect to PC Use of Philips EasyLink 8 Product Information Display Resolution Supported Multimedia Tuner Receiver Transmitter Remote Control Power Supply TV Mounting Bracket Specification 9 Trouble Shooting Common Troubles Channel Troubles Image Troubles Audio Troubles HDMI Connection Computer Connection Contact Us 17 18 19 20 21 22 22 22 22 22 22 22 23 23 23 24 24 24 25 25 25 1 Announcement 2013 Koninklijke Philips Electronics N V A
6. URCE 2 amp KOs 2 e PHILIPS TELEVISION Power Standby button e After power up press it to turn on the TV e Press it again to switch to standby mode Menu Turn on off the menu NICAM Switch between sound effects only available for TV signal sources that support NICAM function Source Select an input source for the TV lt 44 gt i E gt gt Shortcut keys in USB mode previous start pause stop next Options Access the options related to the current activity OK e In menu mode confirm the input or selection e In USB mode play pause AV lt P Navigation keys e In menu mode navigate the menu e In USB mode press lt P to search forward or backward while playing music or video files Info Display the program information when available K Mute Mute or unmute the sound CH Switch to the previous next channel in TV mode B Numeric keys 0 9 Select a channel or value Smart P Switch to the preset image mode Smart S Switch to the preset audio mode Volume Increase reduce the volume D Return CH Switch Return to the previous channel Sleep Switch the TV to the standby mode when the preset time is out E FORMAT Select the aspect ratio of image lt 3 Incredible Surround Enable or disable the virtual surround audio effect Use the Remote Control When using the re
7. Video formats supported by USB e Storage device USB storage support FAT or FAT32 USB storage devices only e Multimedia files e Photo file e Audio file e Video file A Note e Philips gives no guarantee to the compatibility with USB storage devices and shall not be liable for any data corruption or loss caused by connecting such device to the TV View Photos or Play Music and Video Files from USB Storage Device 1 Turn onthe TV 2 Insert the USB storage device to the USB port on the side of the TV Press the Menu key 4 Select Browse USB and then press the OK key Select the USB device you ve inserted and then press the OK key amp Enter the USB browser 14 View Photos 1 Select Photo on the USB browser and then press the OK key 2 Selecta photo or folder and then press the OK key The photo will be auto played in full screen View Photos as Slide Show 1 When a photo is played in full screen you can press the OK key To view photos as slide show starting from the current photo 2 Use the follow keys to control the slide show OK play pause M4 gt gt view the previous or next photo E D exit the slide show Change the Slide Show Settings 1 Press the key during the slide show 2 Select one of the following options and then press the OK key e Start Stop start or stop the slide show EN Transition Effect set the photo
8. a SLEEP OPTIONS Ht p u A 1 Press the key The list of signal sources appears 2 Press AW to choose a device 3 Press the OK key to select it t The TV is switched to the selected signal source Adjust the Volume 6 jA e o z 2O O OOOO O F Increase or reduce the volume e Press the Volume key on the side panel of the TV or on the remote control Mute or unmute the sound e Press the X key to disable audio output e Press the NK key again to unmute the sound output 5 Other Functions Access the TV Menu You can enter the menu to set up the channel change settings on image and sound and access other functions 1 Press the Menu key Ly The menu is displayed Device a p Watch TV Browse USB Setup 2 Select the following options and press the OK key e Watch TV when other signal sources are selected you can select this option to switch to the TV program e Browse USB view the photos and play the music and video files from the USB storage device e Device display the devices connected to the TV e Setup sound and other settings change the image EN Change the Language You can change the menu language Change the menu language 1 Press the Menu key 2 Select Setup gt LOptions gt Menu Language and then press gt to enter 3 Sel
9. als and components R I If the TV carries a wheeled bin mark with a cross it complies with the EU Directive 2002 96 EC Please learn your local separate collection system for electronic and electrical products Obey your local regulations not to throw the used TV into the general household waste Disposing of the used TV properly can avoid causing negative impacts to the environment and human health R As stipulated in EU Directive 2006 66 EC battery should not be disposed of as general household waste in Europe Always abide by your local regulations on disposal of batteries Recycling of used batteries can prevent negative impacts on the environment and human health caused by hazardous materials contained in the batteries 3 Product Introduction Thanks for purchasing a Philips TV To get the best technical support from Philips please register your TV on the following website www philips com welcome Control Panel SOURCE lt 6 O20210 ail O amp O TI 0 O Indicator Remote Control Sensor Source display the list of signal sources CH switch to the previous next channel VoL increase reduce the volume Menu turn on off the main menu turn on off the TV to cut off power supply please unplug the power cable Remote Control MENU J e FORMAT INCR SURR NICAM SO
10. c shock or fire This TV is not allowed to contact water or rain Do not put any liquid container like vase beside the TV If any liquid is splashed into the TV or onto the TV surface please disconnect the power immediately and contact Philips customer service center for an inspection Do not put the TV remote control or battery beside any open fire or other heat sources including direct sunlight Please always keep the lit candles and other open fires away from the TV battery to prevent the flame remote control and spreading Do not insert any object into the ventilation hole or any other opening of the TV Make sure the power cord is not strained when turning the TV or the power connection could get loose to produce sparks Danger Short circuit or fire Do not expose the remote control or battery to water rain or an overheated environment Do not tension the inserted power plug or it could get loose to product sparks or cause a fire Danger Personal injury or product damage The TV is more than 25kg in weight and needs two persons to carry To install the TV onto the base please use the attached base only The base should be fixed to the TV reliably The TV should be put on a flat horizontal surface that can bear the total weight of the TV and base To install the TV into the wall please use a hanging bracket that can bear the weight of the TV Fix the hanging bracket to a wal
11. ect a language Change the Image and Sound Settings You can use the predefined image and sound settings or change the settings manually Ea Note e When watching the TV or a connected device you can press the O key or key to enter the image and sound settings directly Use the Smart P Mode You can use the predefined image settings 1 Press the O key 2 Select one of the following options and then press the OK key e Bright increase the image contrast and definition e Standard adjust the image settings to fit most video sources and types e Soft adjust the image softness e User use the user defined image settings Adjust the Picture Settings Manually 1 Press the Menu key 2 Select Setup gt Picture and then press p to enter 3 Select one of the following options and then press to enter e Smart Picture select the predefined image settings e Contrast adjust the backlight and increase the difference in backlight intensity between the bright area and dark area 0 100 e Brightness adjust the light intensity and fineness of the dark area 0 100 e Saturation adjust the color saturation 0 100 e Aspect Ratio adjust the aspect ratio of the image EN e Color Temperature adjust the overall color temperature of the image e Definition adjust the image definition 0 100 e Reduce Noise filter and reduce the
12. k if the sound setting is correct Only one speaker works e Check if the Sound Balance is set to Middle HDMI Connection Trouble in HDMI Devices e Please notice that HDCP support may cause delay to display the content of HDMI devices e f the TV doesn t identify the HDMI device and display no image please try to switch the signal source to another device and then switch back e In case of intermittent sound please check if the output setting of the HDMI device is correct EN f you use a HDMI DVI adaptor or a HDMI DVI cable please check if the additional audio cable has been connected to AUDIO port only for the mini jack Computer Connection Unstable Display on TV e Check the resolution and refresh rate is supported by your PC e Set the TV image format to Uncompressed Contact Us 25 If you cannot solve the troubles please refer to www philips com support for the FAQs If tt doesn t help either please contact with your local Philips customer service center WN Warning e DO NOT try to maintain the TV by yourself It may result in serious personal injury irretrievable damage to the TV and void the warranty Notice e Before you contact the Philips service center please take notes of yourTV model and serial number printed on the back housing of the TV and on the package PHILIPS All registered and unregistered trademarks a
13. l that can bear the total weight of the TV and hanging bracket TP VISION NETHERLANDS B V shall not be held liable for any accident personal injury or loss caused by improper installation Danger Child hurt Please follow the instructions below to avoid the TV falling down to hurt your child e Do not put the TV on a surface covered with an unsecured cloth or any other material Make sure the TV is put within the surface edges e Ifyou putthe TV ona high furniture like bookcase please fix both the TV and furniture to a wall or any other appropriate support e Let your child know the possible dangers caused by climbing the furniture to touch the TV Danger Do not eat the battery e The TV and remote control contain the batteries in a coin size which could be accidentally eaten Please make sure the batteries are kept beyond the reach of your child Danger Overheating e Do not install the TV in a confined space Leave at least 4 inches or 10cm around the TV for the purpose of ventilation Make sure the curtain or other objects can not shield the ventilation hole of the TV Danger Do not damage the TV Before connecting the TV to the power socket please make sure the power voltage conforms to the voltage values printed on the back of the TV In case of any difference do not connect the TV such power socket Danger Personal injury fire or power cord damage e Do not allow theTV or a
14. ll rights reserved The product specifications are subject to change without further notice All trademarks shall remain the property of Koninklijke Philips Electronics N V or their respective owners TP VISION NETHERLANDS B V reserves the right to change the specifications of the product at any time with no obligation to apply such changes to products already shipped The information provided in this Manual is sufficient to explain the designed purpose of this product If you want to use this product or its any module or program for any purpose other than the designed one please confirm the effectiveness and appropriateness first TP VISION NETHERLANDS B V warrants that the information provided in this Manual does not infringe any American patent without making any other expressed or implied warranty TP VISION NETHERLANDS B V shall not be held reliable for any mistake in this Manual or any problem arising from this Manual TP VISION NETHERLANDS B V will correct the mistakes reported by users within the EN shortest time and post them on its support website Pixel This LED TV provides a high pixel Its effective pixel reaches 99 999 or higher but dark or bright spots red green or blue may still appear on the screen This is a structural property of LED screen within the limit of general industry standards not a fault Warranty No user is allowed to replace any component Do not open
15. mer will be displayed 3 Select a preset time from 0 180 min The preset time is available in multiple of 10 minutes If you set it to 0 min the sleep timer will be disabled 4 You can also press the Sleep key on the remote control to set the sleep time Press the OK key to start the sleep timer The TV will enter standby mode when the preset time is out Use the Lock Function This function can prevent your child watching certain programs or channels Set or Change the Password 1 Press the Menu key 2 Select Setup gt Child Lock 3 Press the numeric keys on the remote control to input your password 13 ty Follow the instructions on the screen to set or change your password EJ e If you ve forgotten your password please input 3448 to overwrite it e After setting a new password you may need it when making some settings Lock Unlock Channels 1 Press the Menu key 2 Select Setup gt Child Lock gt Lock Channel and then nput your password ty The channel list will be displayed 3 Select the channel to be locked or unlocked and then press the OK key ty You are required to input the password when you watch the locked channel for the first time and the lock settings will come into effect 4 Exit the main menu immediately Note e The child lock function works in TV mode only EN Play USB Media
16. mote control please aim the remote control transmitter at the remote sensor on the TV Make sure no obstacles stay between the remote control and TV EN 4 Use the TV The basic operations are described in this section Switch to Standby Mode 6 le z a 0 00 O lt 5 O 3 2 i O O T i FORMAT INCR SURR NICAM SOURCE Lt l Switch the TV on e Ifthe indicator is not lit please plug the power cord into the power socket e press the 4 Power Standby ey on the remote control or the power key on the side panel of the TV Switch TV to standby e Press the Power Standby key on the remote control Ea Tips e The TV still consumes a little power in standby mode If you will not use the TV for long please unplug the Tv s power cord EN Switch the Channel O Q E O Q MUTE VOL CH e Press the CH key on the remote control or CH key onthe side panel of the TV Choose a channel using the numeric keys on the remote control View Connected Devices Note e Please turn on the external device connected to the TV before selecting the signal source Use the Source Key 7 FORMAT INCR SURR NICAM SOURCE D nal Pil a eal qs m
17. noise in the image e Tone adjust the color balance of the image settings 0 100 Change the Aspect Ratio 1 Press the 9 key 2 Press AW to select an image format and then press the OK key Aspect Ratio You can select from the following image formats Note e Some ofthe image formats may not be available for some signal sources Wide Screen adjust the aspect ratio from standard to wide screen 4 3 switch to the standard aspect ratio of 4 3 14 Zee in Subtiti l 3 Select one of the following display the image in options and then press P Se eee eee e Smart Sound select the r the SOMES toht the predefined sound settings width of the screen ee adjust the bass but part of the image 0 00 will be cut off on the 2 is e adjust the treble 0 100 top e Auto Adjust suppress 16 9 adjust the sudden change in volume aspect ratio from 4 3 when switching the to 16 9 channel e Balance adjust the Use the Smart Sound balance between the left You can use the predefined sound speaker and right speaker settings e Virtual Surround enable 1 Press the d key or disable the virtual 2 Select one of the following options surround effect and then press the OK key Standard suitable for most Change the Other Settings environments and signal 1 Press the Menu key sources 2 Select Setup g
18. ny other object to lie on the power cord Make sure you can always touch the power cord so that you can easily disconnect it from the TV when necessary When disconnecting the power cord please hold the power plug rather than pull the power cord Disconnect the TV from the power socket and antenna before the thunderstorm occurs In case of thunderstorm please do not touch any part of the TV power cord or antenna Danger Hearing impairment e Do not use the earphone or headphone at a high volume or for along time Low temperature e Ifthe TV has been transported under a temperature lower than 5 C please open its package and then do not connect the TV to the power socket until it gets used to the room temperature Screen Maintenance e Avoid using static images A static image will stay on the EN screen for long like screen menu black bar and time display If you have to use any static image please reduce the contrast and brightness of the screen to prevent damage Remove the power plug before cleaning the TV e Wipe the TV and frame with a wet soft cloth rather than alcohol chemicals or household detergent Be careful not to damage the screen Do not use any object to touch push rub or tap the screen Wipe the water drops if any away Immediately to avoid deformation and color fading Disposal of Used TV and Battery This TV is made of recyclable high performance materi
19. or System and Sound System Step 2 Search and save new channels 1 Press the Menu key 2 Select Setup gt Channel gt Manual Scan EN Select Channel and then press AY to select a channel number e Select Search and then press AY to start channel scanning 3 When searching is finished Select Done to save the searched channel as the current channel Step 3 Fine tune the analog channels 1 Press the Menu key 2 Select Setup gt Channel gt Fine Tune 3 Press AW to adjust the channel frequency 4 Select Done to exit the fine tuning Channel Edit 1 Press the Menu key 2 Select Setup gt Channel Edit Channel 3 Press AW to select a channel and press lt q P gt to select Watch Delete or Skip 7 Connect Devices You can connect devices with different interfaces to this TV Note You can connect the device to TV via interfaces of different type 17 Interfaces on the back Audio amp Video Input of PC Component Input AV2 Input Video 2 Y Pb Pr Audio L Audio R You can connect to analog audio amp video input from analog digital devices like DVD players or game station V V Y Pb Pr AUDIO L AUDIO R COMPONENT IN Note Video 2 shares the same input interface with the component Y signal and the audio of the video 2 shares the same input
20. please refer to Multimedia Files Supported www philips com support Image JPEG Audio MP3 Display Resolution Supported Video MPEG 2 MPEG 4 H 264 PC Format e Resolution Refresh Rate Tuner Receiver Transmitter e 720X400 70Hz Antenna Input 75ohm coaxial IEC75 640 X 480 60Hz e TV System PAL NTSC e 800 X 600 60Hz e Video Play PALNTSC SECAM 1024 X 768 60Hz eee poo ENRE Remote Control Video Format e Battery 2XAAA Resolution Refresh Rate e 480i 60Hz Power Supply e 480p 60Hz Main Power Supply e 576i 50Hz 100 240V 50 60Hz e 5 6p 50Hz Standby Energy Consumption e 720p 50Hz 60Hz SO SW e 1080 50Hz 60Hz Environment Temperature 5 40 C 1080p 50Hz 60Hz Power Consumption 30W TV Mounting Bracket Please purchase the Phillips TV mounting bracket or equivalents compatible with VESA standard to install your TV EN 22 Keep a minimum clearance behind the TV of 2 2 inch 5 5cm to prevent damage to the cables and sockets UN Warning Please install the TV mounting bracket according to the user instructions supplied with it Koninklijke Philips Electronics N Vshall not be liable for any accident personal injury or loss caused by improper installation Screen Dot pitch Mounting Size mm Screw Inch 24 100X100 4xM4 Specification The design and specification is subject to change without prior notice as the product will be
21. re the property of their respective owners Specifications are subject to change without notice Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V 2013 TP Vision Netherlands B V All rights reserved
22. switch effects e Frequency set the display time of each photo e Random Play select to play the photos in sequence or at random e Play Once Repeat J select to play the photos once or repeat playing them e Rotate rotate the photo e Capture set the photo as the TV s startup image or reset the startup image e Details display the detailed information Listen to Music 1 Select Music on the USB browser and then press the OK key 2 Select a song or album and then press the OK key to play it Change the Music Settings Press the key during the music playing select one of the following options and then press the OK key e Start Stop start or stop playing e Play Once Repeat select to play the songs once or repeat playing them 15 e Random Play select to play the songs in sequence or at random e Details display the detailed information Play Music for Slide Show You can play background music for slide show 1 Select a music album 2 Press theOKkey 3 Press the D key to return to the USB browser Select a photo album Press the OK key to start the slide show Watch Videos 1 Select Video on the USB browser and then press the OK key 2 Select a video and then press the OK key to play it 3 Use the following keys to control the video playing OK play pause lt gt search forward or backward Change the Video Settings Press
23. t Options and e Music suitablefor music fernen eto cule files 3 Select one of the following e Fim suitable for video options and then press to enter files e Menu Language change e User use the user defined the menu language Sound seinge e Menu Timeout set the time for displaying menu to Adjust the Sound Settings Manually 5s 30s 45s 60s i 2 Press the Menu key Select Setup Sound and change the menu transparency then press gt to enter 0 100 e Menu Transparency EN 12 e Blue Screen enable or disable the blue screen display function e SleepTimer set the time period before the TV is switched to standby mode 0 180 min e Dynamic Backlight turn on off the dynamic backlight this optional function may vary depending on the actual products e System Reset restore the image and sound settings to the factory default settings the channel settings wil notl be reset Use the Sleep Timer You can switch the TV to the standby mode after a preset amount of time Auto Switch to Standby Mode Sleep Timer You can use the sleep timer to switch the TV to the standby mode when the preset time is out Ed e You can turn off the TV before EN the preset time or reset the sleep timer in the countdown process 1 Press the Menu key 2 Select Setup gt Options gt Sleep Timer t The sleep ti
24. trol functions The HDMI CEC compatible device connected via HDMI interface can be controlled by the TV remote control To enable Philips EasyLink you need to e Connect two or more HDMI CEC compatible devices via HDMI interfaces e Make sure that each HDMI CEC compatible device is working normally e Switch to EasyLink Ei Nate e The EasyLink compatible device must be enabled and selected as signal source e Philips gives no guarantee that the interoperability can be realized with all HDMI CEC devices Enable or Disable EasyLink When the HDMI CEC compatible device is enabled the TV will be started automatically and switch to the correct signal source EN Note e f you don t want to use Philips EasyLink please disable it 21 1 Press the Menu key 2 Select Setting gt EasyLink gt EasyLink 3 Select ON or OFF and press they OK key Use of Fast Play When EasyLink is enabled press Play on the device The TV will switch to the correct signal source automatically Use of Fast Standby Press Power Standby on the remote control The TV and HDMI devices connected will be switched to standby mode 8 Product Information Multimedia The product information is Storage Devices Supported USB subject to change without prior storage only support FAT or FAT 32 notice For detailed product USB storage devices information
25. updated constantly e Excluding TV base e Siz WXH X D 561 X345 X 42 mm e Weight 3 6kg e Including TV base e Siz W XH X D 561 X373X 156 mm e Weight 3 8kg EN 9 Trouble Shooting In case of trouble before you ask for services please conduct simple troubleshooting as below Common Troubles 23 Power on failure e Unplug the power cord from the socket Reconnect it after one minute e Check if the mains lead is connected firmly Abnormal operation of remote control e Check if the battery electrodes in the remote control are proper e f the battery gets exhausted or leaks replace it e Clean the remote control and the TV sensor Standby indicator light flashes e Unplug the power cord from the socket and reconnect it when the TV cools down If this trouble still exists please contact with the Philips customer service Forget the unlock password e Select Child Lock gt Change Password and input 3448 to overwrite the current password Menu displayed in foreign language e Set the menu to your desired language When theTV is starting or switched tostandby mode it makes squeak sound e No operation is needed This is normal when the TV cools down or gets preheating Channel Troubles Image Troubles No image after powering on the TV Check if the antenna has been connected properly e Check if a proper device is selected as the signal source

Philips 24PFL1335 24" HD-ready Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 24PFL1335 24&quot; HD-ready Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 24PFL1335 24" HD-ready Black