Havis C-TM-SEATMT car kit
Contents
1. Havis Inc 75 Jacksonville Road PO Box 2099 Warminster PA 18974 T800 524 9900 F 215 957 0729 Productivity in motion wwwhavis com INSTALLATION INSTRUCTIONS C TM SEATMT Universal Seat Mount Platform for Laptop Computers TOOLS REQUIRED Ratchet Wrench and Socket Set Phillips Screw driver 7 16 Open End Wrench PARTS and MOUNTING HARDWARE QTY DESCRIPTION PART 1 Seat Mount Backing Plate CMO002510 1 Ratchet Strap with Hooks GSM20085 All other hardware comes already attached to seat mount assembly or with other optional parts C TM SEATMT ASSEMBLY DRAWING Always Read all instructions before installing any Havis Inc products Use only hardware provided with install kit For product support visit the Install Instructions Section of our website at http havis com Installation Installation html email technicalsupport havis com or call 1 800 VV V 524 9900 and ask for technical support C TM SEATMT_INST_7 10 HAVIS Productivity in motion Assemble Strap with Hooks and Backing plate as shown in photo and or drawing Ratchet on passenger side works best Bolt LPS XXX power supply to the bottom of Docking Station and attach Dock to seat mount assembly with C MD 202 Tilt Swivel Parts sold separately Before attaching additional parts place the main assembly on the seat top Adjust the rear plate so it is against the seat back Adjust the forward plate so it wrap2. s closely over the front of seat pad Havis Inc 75 Jacksonville Road PO Box 2099 Warminster PA 18974 800 524 9900 F 215 957 0729 www havis com wE a Note An optional offset adaptor can be used to position computer closer to center of vehicle C HDM 303 shown Docking Station with optional C HDM 303 and C MD 202 shown Place Seat Mount assembly on seat and slip the backing plate through the gap between the seat back and seat pad C TM SEATMT_INST_7 10 HAVIS Productivity in motion Havis Inc 75 Jacksonville Road PO Box 2099 Warminster PA 18974 800 524 9900 F 215 957 0729 www havis com Position backing plate so it will not pull back through the front of seat Attach both hooks underneath the seat to a sturdy location Do NOT attach to moving parts or wires Pull strap slack through ratchet mechanism and tighten the ratchet so the platform is firmly attached to seat Plug power cable into the 12 volt power source NOTE A towel between the seat and seat mount platform will protect the seat Adjust brackets to position the computer in the desired location F a This platform can accommodate an optional printer mount C TM SEATMT_INST_7 10
Download Pdf Manuals
Related Search