SYBA SD-LP-NEC4U
Contents
1. MANL NEC102 2 EN 20060906 User Manual Introduction This NEC PEI to USB 2 0 Host Controller card is compliant with the Universal Serial Bus Specification Revision 2 0 and Open Host Controller Interface Specification for low speed 1 5Mbps full speed 12Mbps speed signaling and Enhanced Host Controller Interface Specification for high speed signaling 480Mbps Itis an ideal platform for connecting to thousand or million of existing USB devices such as mice printers memory card readers scanners and anything you can think of Features Using NEC uPD720102 PCI to USB 2 0 Host Controller chip x Compliant with Universal Serial Bus Specification Revision 2 0 Compliant with Open Host Controller Interface Specification for USB Rev 1 0a Compliant with Enhanced Host Controller Interface Specification for USB 32 bit 33MHz Host Interface compliant to PCI Specification release 2 2 Supports PClI Bus Power Management Interface Specification release 1 1 PCI bus master access All downstream forcing ports can handle high speed 480Mbps full speed 12Mbps and low speed 1 5Mbps transaction Fully Plug amp Play compliant Full support of real time dynamic insertion and removal of devices Supports all USB compliant peripherals e g keyboard mouse monitor telephone joystick etc Driver support for Windows 2000 XP Server 2003 XP 64 bit MAC operating system WARNING Before installing and activating the controller card pl2. ease make sure you have a complete backup of your existing data from hard drives Manufacturer is not responsible for data loss due to abuse misuse or neglect Should you have any installation problem please contact your dealer for assistance Installing Windows drivers for the Controller Card Before the installation of the controller card let us make the following assumptions 1 The end users must have the basic knowledge of installing an internal device and its driver to a PC If they are not sure about their abilities or have any queries please call their local dealers immediately or find somebody who are experienced and qualified for assistance 2 The computer has been properly installed with our supported Windows operating system Installing the controller card into the computer Turn off your computer and all external devices connect to it Disconnect your computer from the power sources Open the computer case Refer to your computer user manual for more details Find an available PCI slot and remove the slot bracket Save the bracket screw for later use Align the controller card horizontally with respect to the slot and insert it into the slot firmly and evenly Take care not to force it into the slot Once you have properly positioned the controller card into the slot fasten it to the computer case with the screw you have just saved 6 Connect the system to the devices by inserting the USB cable not inc
3. luded in the package into the USB connectors on the controller card 7 Secure the computer case and switch on your computer oar wh Installing Windows driver for the controller card 1 Turn on the computer 2 Once Windows is running anew controller card is detected 3 Windows will load its own driver for the USB controller card automatically 4 Wait for Windows starts completely and the USB ports are ready to use Notice Most OS have their own driver for the USB controller card but they might not have the driver for the external devices connecting to the USB controller card Therefore be sure the driver for the external devices is available before installing Checking the status of the installed driver 1 Right click on the icon of My Computer and choose Properties 2 Choose Device Manager 3 Left click on the sign of the Universal Serial Bus controllers 4 The following device should be shown NEC PCI to USB Open Host Controller Standard Enhanced PCI to USB Host Controller 5 Right click on the device above and choose Properties 6 Check the Device status in the General window The following should be shown This device is working properly Notice When the device driver is properly installed there will not be any question and exclamation mark shown against this device If yes check the following 1 The driver for the controller card is installed straightly according to the procedure listed above 2 If a
4. n older version driver is installed previously 3 The driver for a similar product is installed 4 In the worst case the controller card is defective Please contact your local dealer or distributor immediately R Updating the operating systems software drivers The updated software drivers are always available for download on the following website http www drivers download com Search for DL code 180401 from Drivers Search All specifications and information are subjected to change without prior notice All logos and trademarks referenced are the registered trademark of their respective owners
Download Pdf Manuals
Related Search