SYBA SD-PEX-NEC4F
Contents
1. controller card automatically 4 Wait for Windows starts completely and the FireWire ports are ready to use Notice Most OS have their own driver for the 1394a controller card but they might not have the driver for the external devices connecting to the 1394a controller card Therefore be sure the driver for the external devices is available before installing Checking the status of the installed driver 1 Right click on the icon of My Computer and choose Properties 2 Choose Device Manager 3 Left click on the sign of the IEEE 1394 Bus host controllers 4 The device identifier of the corresponding controller card should be shown 5 Right click on the device above and choose Properties 6 Check the Device status in the General window The following should be shown This device is working properly Notice When the device driver is properly installed there will not be any question and exclamation mark shown against this device If yes check the following 1 The driver for the controller card is installed straightly according to the procedure listed above 2 If an older version driver is installed previously 3 The driver for a similar product is installed 4 In the worst case the controller card is defective Please contact your local dealer or distributor immediately All specifications and information are subjected to change without prior notice All logos and trademarks referenced are the registered trademark of th2. MANL EN874 EN 1 20060704 User Manual Introduction The PCI Express FireWire Host Controller Card is designed base on the IEEE standard 1394 1995 and compliant with IEEE standard 1394a 2000 It provides a data transfer rate up to 400M bits s therefore it is an ideal platform for connecting external high performance devices i e external memory storages With this speed it is also perfect for video capturing and audio data transfer Furthermore the controller card allows 2 or more computers connected together as a local area network via the 1394a connection Features Compliant with PCI Express Revision 1 0a 1 Lane x1 PCI Express with transfer rate 2 5Gb s full duplex channel Compliant with IEEE 1394 OpenHCl Specification V1 0 and 1 1 Compliant with IEEE 1394 1995 and 1394a 2000 standard Support transfer rate of 400 200 100Mb s Fully interoperable with FireWire and i LINK implementation of IEEE 1394 Standard Fully Plug amp Play and Hot Plug Ideal for home and office use Windows 2000 XP XP 64 bit Server 2003 supported WARNING Before installing and activating the controller card please make sure you have a complete backup of your existing data from hard drives Manufacturer is not responsible for data loss due to abuse misuse or neglect Should you have any installation problem please contact your dealer for assistance Installing Windows drivers for the Controller Card Before the installa
3. eir respective owners
4. tion of the controller card let us make the following assumptions 1 The end users must have the basic knowledge of installing an internal device and its driver to a PC If they are not sure about their abilities or have any queries please call their local dealers immediately or find somebody who are experienced and qualified for assistance 2 The computer has been properly installed with our supported Windows operating system Installing the controller card into the computer 1 Turn off your computer and all external devices connect to it 2 Disconnect your computer from the power sources 3 Open the computer case Refer to your computer user manual for more details 4 Find an available x1 PCI Express slot and remove the slot bracket Save the bracket screw for later use 5 Align the controller card horizontally with respect to the slot and insert it into the slot firmly and evenly Take care not to force it into the slot Once you have properly positioned the controller card into the slot fasten it to the computer case with the screw you have just saved 6 Connect the system to the devices by inserting the 1394a cable not included in the package into the 1394a connectors on the controller card 7 Secure the computer case and switch on your computer Installing Windows driver for the controller card 1 Turn on the computer 2 Once Windows is running a new controller card is detected 3 Windows will load its own driver for the 1394a
Download Pdf Manuals
Related Search