Philips HTL2111A
Contents
1. e OPT Switch your audio source to the optical connection USB Switch your audio source to the USB connection Volume e Increase or decrease volume SURR e Toggle between stereo and virtual surround sound BASS RESET Increase or decrease bass e Set the bass to the default settings TREBLE RESET Increase or decrease treble e Set the treble to the default settings 0 E 1 amp Mute or restore volume Connectors This section includes an overview of the connectors available on your SoundBar Side right 4 lt USB Audio input from a USB storage device AUDIO IN Audio input from an MP3 player 3 5mm jack Rear connectors AC MAINS Ss AUDIO IN AUX Connect to an analog audio output on the TV or an analog device DIGITAL IN OPTICAL Connect to an optical audio output on the TV or a digital device DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device AC MAINS Connect to the power supply 3 Connect This section helps you connect your SoundBar to a TV and other devices For information about the basic connections of your SoundBar and accessories see the quick start guide Note For identification and supply ratings refer to the type plate at the back or bottom of the product e Before you make or change any connectio2. 10 e The SoundBar is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar The connected Bluetooth device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar e Turn off Wi Fi function on the Bluetooth device to avoid interference e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the SoundBar EN 13 8 Notice This section contains the legal and trademark notices Notice of complian ce The device complies with the FCC rules Part 15 Operation is subject to the conditions following two O This device may not cause harmful interference and O This device must accept any interference received including interference that may cause undesired operatio FCC rules This equipment has been teste to comply with the limits for a device pursuant to part 15 of protection against harmful inte residential installation This equi uses and can radiate radio freq and if not installed and used in n d and found Class B digital he FCC Rules These li
3. 30023 2248 1 866 310 0744 Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following Two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canadian ICES 003 Trademarks DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories E Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by WOOX Innovations is under license Other trademarks and trade names are those of their respective owners ONE 1 YEAR LIMITED WARRANTY WARRANTY COVERAGE This warranty obligation is limited to the terms set forth below WHO IS COVERED This product is warranted to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warr
4. local regulations For perchlorate material special handling may apply Visit www dtsc ca gov hazardouswaste perchlorate 2 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Main unit This section includes an overview of the main unit O SURR indicator Lights up when you select Virtual Surround sound O Source indicators e OPTICAL Lights up when you switch to optical input source e AUX Lights up when you switch to analog input source e COAXIAL AUDIO IN Lights up when you switch to coaxial input source Lights up when you switch to audio input source 3 5mm jack e Bluetooth ghts up when you switch to uetooth mode and Bluetooth devices re paired inks when you switch to Bluetooth mode and Bluetooth devices are not paired 2 Wwe Ww Remote control This section includes an overview of the remote control Bluetooth 7 AUX Coax i AUDIO IN PHILIPS SOUNDBAR SPEAKER 4 Standby On Switch the SoundBar on or to standby O Source buttons Bluetooth Switch to Bluetooth mode e COAX Switch your audio source to the coaxial connection AUX AUDIO IN EN 5 Switch your audio source to the AUX connection Switch your audio source to audio in connection
5. within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed iterature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert EN 3 Care for your product Use only microfiber cloth to clean the product Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused Please visit www recycle philips com for additional information on a recycling center in your area ever dispose of your product with other household waste Please inform yourself about he local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to
6. For product support visit Para obtener asistencia t cnica visite Pour en savoir plus sur l assistance sur les produits visitez le site www hd philips com HTL2111A User manual EN For further assistance call the customer support service in your country To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 310 0744 To obtain assistance in Mexico contact Philips Customer Care Center at 01 800 839 1989 exico city 5887 9736 ES Para obtener mas informacion llame al servicio de soporte al cliente de su pais e Para obtener asistencia en los Estados Unidos en Canada Puerto Rico o en las Islas Virgenes de los Estados Unidos comuniquese con Centro de atencion al cliente de Philips al 1 866 310 0744 Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA 01 800 839 1989 Solo Para Mexico exico city 5887 9736 FR Pour obtenir de l aide supplementaire communiquez avec le centre de service a la clientele de votre pays e Pour obtenir de l aide aux Etats Unis au Canada a Puerto Rico ou aux lles Vierges americaines communiquez avec le centre de service a la clientele Philips au 1 866 310 0744 e Pour obtenir l aide au Mexique entrez en contact avec le centre de soin de client de Philips a 01 800 839 1989 Mexico city 5887 9736 For Product recycling information please visit www recycle philips com Para obtener informaci n de productos d
7. Start Guide or download the User Manual from www philips com support e Switch the SoundBar to the correct source for other devices Adjust the volume 1 Press Volume to increase or decrease a volume level To mute sound press amp MUTE e To restore the sound press 6 MUTE again or press Volume L gt All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value Choose your sound This section helps you choose the ideal sound for your video or music Surround sound mode Experience an immersive audio experience with surround sound modes 1 Press SURR to turn surround mode on or off e On Create a surround listening experience e Off Two channel stereo sound Ideal for listening to music Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar 1 Press TREBLE or BASS to change the frequency L gt All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value 2 To reset the bass and treble to the default setting press RESET MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on your SoundBar Press AUDIO IN Press the buttons on the MP3 player to select a
8. anty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes the company property When a refund is given your product becomes the company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to the new products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the pr
9. apparatus during lightning storm or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time e The batteries shall not be exposed to excessive heat such as sunshine fire or the like e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate The product remote contro may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention When you change the batteries always keep all new and used batteries out of reach of children Ensure that the
10. are registered trademarks of Koninklijke Philips N V 5 HTL2111A_F7_UM_V1 0
11. battery compartment is completely secure after you replace the battery f the battery compartment cannot be completely secured d product Keep out of iscontinue use of the reach of children and contact the manufactu rer Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus for example liquid filled objects lighted candles This apparatus may contain lead and mercury Dispose according to local State or Federal laws For disposal or recycling information please contact your local authorities For additional assistance on recycling options please contact www mygreenelectronics com or www eiae org or www recycle philips com Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling apparatus can cause serious injury or even death e This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 7 8 inches 20cm or more around this apparatus Class Il equipment symbol This symbol indicates that the unit has a double insulation system This bolt of lightning indicates uninsulated material
12. e Bluetooth indicator blinks at a fast rate 2 On the Bluetooth device switch on Bluetooth search for and select PHILIPS HTL2111A to start connection see the user manual of the Bluetooth device on how to enable Bluetooth e When prompted for a password enter 0000 L gt During connection the Bluetooth indicator blinks at a lower rate 3 Wait until the Bluetooth lights up Ly f the connection fails the Bluetooth indicator blinks continually at a lower rate 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active Note The music streaming may be interrupted by obstacles between the device and SoundBar such as wall metallic casing that covers the device or other devices nearby that operate in the same frequency e Ifyou want to connect your SoundBar with another Bluetooth device disable the currently connected Bluetooth device Apply factory settings You can reset your SoundBar to the default setting mode 1 In mute mode quickly press AUX twice L gt The factory settings is restored 5 Wall mount BH Improper wall mounting may result in accident injury or damage If you have any query contact Consumer Care in your country e Before wall
13. e reciclaje por favor visite www recycle philips com Pour tout renseignement sur le recyclage des produits veuillez visiter www recycle philips com ar USA e PHILIPS Contents 1 Important Help and support Important safety instructions Care for your product 4 Care of the environment 4 NNN 2 Your SoundBar Main unit Remote control Connectors os 1 Un Un N 3 Connect Placement 7 Connect audio from TV and other devices 7 4 Use your SoundBar Adjust the volume Choose your sound MP3 player USB storage devices Play audio through Bluetooth Apply factory settings OoOoOw Om oO NO XO 5 Wall mount 1 6 Product specifications 2 7 Troubleshooting 3 8 Notice 4 Notice of compliance 4 Trademarks 4 EN 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Help and support For extensive online support visit www philips com support to e download the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAQs e email us a question e chat with our support representative Follow the instructions on the website to select your language and then enter your product model number Alternatively you can contact Consumer Care in your country Before you c
14. mits are designed to provide reasonable rference ina pment generates uency energy accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 14 EN FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Warning Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Model number PHILIPS HTL2111A F7 Trade Name Philips Responsible Party P amp F USA Inc PO Box 2248 Alpharetta GA
15. mounting make sure the wall can support the weight of your SoundBar Screw length diameter Depending on the type of wall mounting your SoundBar make sure that you use screws of a suitable length and diameter 3 3 5mm gt gt 25mm For information about how to wall mount your SoundBar see the quick start guide EN 11 6 Product specifications Note e Specifications and design are subject to change without notice e Class support USB Mass Storage Class MSC e File system FAT16 and FAT32 Supports MP3 and WMA file formats Bluetooth e Bluetooth profiles A2DP e Bluetooth version 2 1 EDR Amplifier FTC total output power 34W 90Hz 20kHz e RMS total output power 40W RMS 0 5 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity AUX 2Vrms AUDIO IN 1Vrms e Left Right 34W 1 THD 80hm Main unit e Power supply 120 V 60 Hz Power consumption 40 WV Standby power consumption lt 0 5 W e Speaker impedance 8 ohm full range e Speaker drivers 4 x 54 5 mm 2 Dimensions WxHxD 845 x 74 5 x 94 mm e Weight 2 0 kg Audio e S PDIF Digital audio input e Coaxial IEC 60958 3 Optical TOSLINK Sampling f
16. n markings resulting from viewing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Customer Care Center at 1 866 310 0744 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not all
17. nd play audio files or music UI N USB storage devices Enjoy audio on a USB storage device such as an MP3 player and USB flash memory etc What you need e A USB storage device that is formatted for FAT file systems and complies with the Mass Storage Class e An MP3 or WMA file on a USB storage device 1 Connect a USB storage device to the SoundBar 2 Press USB on the remote control L gt The play starts after a few seconds EN 9 This product may not be compatible with certain types of USB storage device e Ifyou use a USB extension cable USB HUB or USB multi reader the USB storage device may not be recognized e Digital camera PTP protocols are not supported Do not remove the USB storage device while it is being read DRM protected music files MP3 W MA are not supported e Support a USB port 5V 500mA Play audio through Bluetooth Through Bluetooth connect the SoundBar with your Bluetooth device such as an iPad iPhone Pod touch Android phone or laptop and then you can listen to the audio files stored on the device through your SoundBar speakers What you need e A Bluetooth device which supports Bluetooth profile A2DP and with Bluetooth version as 2 1 EDR e The operational range between the SoundBar and a Bluetooth device is approximately 10 meters 30 feet 1 Press Q Bluetooth on the remote control to switch the SoundBar to Bluetooth mode L gt Th
18. ns make sure that all devices are disconnected from the power outlet Placement Place your Soundbar as shown below Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar Use the best quality connection available on your TV and other devices Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL 1 Using an optical cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device e The digital optical connector might be labeled SPDIF or SPDIF OUT Option 2 Connect audio through a digital coaxial cable Good quality audio DIGITAL IN COAXIAL IN 1 Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the TV or other device EN 7 e The digital coaxial connector might be labeled DIGITAL AUDIO OUT Option 3 Connect audio through analog audio cables Basic quality audio 1 Using an analog cable connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device AUX IN AUDIO IN EN 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the Quick
19. oduct Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products packaged with the bundled product The company is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than an Authorized Service Location c to a product or a part that has been modified without written permission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or scree
20. ontact note down the model number and serial number of your product You can find this information on the back or bottom of your product Important safety instructions e Read these instructions e Keep these instructions e Heed all warnings e Follow all instructions Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions e Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of he polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this
21. ow the exclusions or limitation of inciden tal or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 lo P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 PHILIPS Reproductor de Barra de Sonido HTL21 1 A F7 120V 60Hz 40W Consumo de Energia El ctrica 8 017Wh Consumo de Energ a El ctrica de el aparato en Modo de Espera 0 324Wh Comercializado por P amp F MEXICANA S A DE C V IMPORTADOR P amp F MEXICANA S A DE C V Av La Palma 6 Col San Fernando La Herradura Huixquilucan Edo M xico MEXICO C P52787 n Tel 52 55 5269 9000 p EXPORTADOR P amp F USA Inc N 0 M gt HECHO EN CHINA NYGE GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO Specifications are subject to change without notice 2013 WOOxX Innovations Limited All rights reserved This product was brought to the market by WOOX Innovations Limited or one of its affiliates further referred to in this document as WOOX Innovations and is the manufacturer of the product P amp F is the warrantor in relation to the product with which this booklet was packaged Philips and the Philips Shield Emblem
22. requency P3 8 kHz 11 kHz 12 kHz 16 kHz 22 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz e WMA 44 1 kHz 48 kHz e Constant bit rate P3 8 kbps 320 kbps e WMA 64 kbps 192 kbps e Version WMA V7 V8 V9 USB e Compatibility Hi Speed USB 2 0 12 EN Remote control batteries e 1 xAAA RO3 1 5V 7 Troubleshooting Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Sound No sound from SoundBar speakers Connect the audio cable from your SoundBar to your TV or other devices Reset your SoundBar to its factory settings e On the remote control select the correct audio input e Make sure that the SoundBar is not muted Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Bluetooth A device cannot connect with the SoundBar e The device does not support the compatible profiles required for the SoundBar You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly see Play audio through Bluetooth on page
Download Pdf Manuals
Related Search