Nokia BH-112U
Contents
1. Start using your headset When you switch on your headset for the first time a voice prompt helps you set up your headset Voice prompts are not available in all languages The headset comes with different sized earpads Select the earpad that fits the best and is the most comfortable for your ear To change the earpad pull the current earpad from the earpiece and push the new earpad into place 1 To switch the headset on press and hold for 2 seconds If the headset doesn t switch on charge the battery 2 Gently push the earpiece into your ear 3 To pair the headset with a compatible phone follow the voice prompt Charge the battery Before using the headset you must charge the battery n Warning Use only chargers approved by Nokia for use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous Use of unapproved chargers may present a risk of fire explosion or other hazard 1 Connect the USB cable to the USB connector of the charger Connect the charger to a wall outlet 2 Connectthe charger cable to the charger connector onthe headset The redindicator light turns green when the battery is fully charged 3 Disconnect the charger from the headset then from the wall outlet When you unplug a charger hold and pull the plug not the cord The fully charged battery has power for up to 5 hours of talk time or up to 150 hours of standby time When the b2. Nokia Bluetooth Headset BH 112U User Guide Issue 1 2 Introduction About your headset With the Nokia Bluetooth BH 112U headset you can handle calls hands free even when you are using two mobile devices at the same time The surface of this product is nickel free Warning This product may contain small parts Keep them out of the reach of small children Parts of the product are magnetic Metallic materials may be attracted to the product Do not place credit cards or other magnetic storage media near the product because information stored on them may be erased Read this user guide carefully before using the product Also read the user guide for the device that you connect to the product About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible devices such as mobile devices Devices do not need to be in direct line of sight but they must be within 10 metres 33 feet of each other The connection may be affected by obstructions such as walls or other electronic devices This device is compliant with Bluetooth Specification 2 1 EDR supporting the following profiles Headset Profile HSP 1 1 Handsfree Profile HFP 1 5 Check with the manufacturers of other devices to determine their compatibility with this device Get started Keys and parts ARM 7 Charger connector Indicator light Power key Microphone Call key Earpiece Earloop
3. attery charge is low you hear a voice prompt the headset beeps every 5 minutes and the red indicator light flashes When the battery is charging the red indicator light is on Check the battery charge Make sure the headset is switched on and press A green light indicates a sufficient charge level If the light is yellow you may need to recharge the battery soon If the light is red recharge the battery Switch the headset on or off Switch on Press and hold for 2 seconds The headset beeps and a green indicator light flashes once The headset connects to the last connected device If you have never paired the headset with a device or you have cleared the device pairings pairing mode is activated Switch off Press and hold for 2 seconds The headset beeps and a red indicator light flashes once All active calls are ended If not connected to a device within 30 minutes the headset switches off Pair and connect the headset to your phone Before using the headset you must pair and connect it to a compatible phone 4 5 6 To switch the headset off press and hold 9 for 2 seconds Switch on the phone to pair with If you have never paired the headset with a phone or you have cleared the phone pairings switch the headset on If you have previously paired your headset with another phone press and hold for 5 seconds Pairing mode is activated and a green indicator light starts to flash quickly F
4. eve the charger is damaged take it to a service centre for inspection before continuing to use it Never use a damaged charger Only use the charger indoors Take care of your device Handle your device charger and accessories with care The following suggestions help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that corrode electronic circuits If your device gets wet allow the device to dry Do not store the device in cold temperatures Do not attempt to open the device Unauthorised modifications may damage the device and violate regulations governing radio devices Do not drop knock or shake the device Only use a soft clean dry cloth to clean the surface of the device Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling of materials Copyright and other notices DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this BH 112U product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com global declaration declaration of conformity Nokia Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered tradema
5. ne Change the volume Set the desired volume level on your connected mobile device The selected volume level is saved as the minimum volume level for the device that is currently connected to the headset Pair and connect the headset to two phones When you use the headset for the first time it automatically connects to your phone You can also connect your headset to another phone and manage calls from for example both your personal and your work phone at the same time 1 Make sure Bluetooth is activated on both phones 2 To switch the headset off press and hold for 2 seconds 3 To activate pairing mode press and hold for 5 seconds and pair the headset with the second phone 4 Switch the headset off and back on The headset connects to both phones To use your headset with just one phone again activate pairing mode and press and hold and for 5 seconds Handle calls from two phones If your headset is connected to two phones you can handle calls from both at the same time End an ongoing call and answer a call on another phone Press Put an ongoing call on hold and answer a call on another phone Press and hold for 2 seconds Switch between active and held calls Press and hold for 2 seconds End an ongoing call and activate a held call Press If you redial or use voice dialling the call is made on the phone you last had an active call on with the headset Clear device pairings 1 T
6. o switch the headset off press and hold for 2 seconds 2 Press and hold and for 9 seconds The headset beeps twice and the red and green indicator lights alternate 3 When the headset switches on follow the voice prompt Pairing mode is activated Deactivate voice prompts 1 To switch the headset off press and hold for 2 seconds 2 Press and hold for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly 3 Press and hold for 5 seconds You hear a voice prompt and a yellow indicator light flashes once Activate voice prompts 1 To switch the headset off press and hold for 5 seconds 2 Press and hold for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly 3 Press and hold for 2 seconds You hear a voice prompt and a green indicator light flashes once Troubleshooting Cannot connect the headset to a compatible device Make sure the headset is charged switched on and paired with the device Did the headset stop functioning even though it is charged Plug the charger into a wall outlet and while you press and hold the power key connect the headset to the charger Product and safety i mation Battery and charger information This device has an internal nonremovable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device Charge your device with any Nokia micro USB cha
7. ollow the voice prompt Within 3 minutes activate Bluetooth on the phone and set it to search for Bluetooth devices For details see the user guide of the phone Select the headset from the list of found devices If required enter the passcode 0000 You can pair your headset with 8 compatible phones but you can only connect it to a maximum of 2 phones at the same time With some phones you may need to make the connection separately after pairing Wear the headset If you want to use the headset with the earloop attach the earloop to the headset To detach the earloop gently pull it from the headset Slide the earloop behind your ear and gently push the earpiece against your ear Carefully bend the earloop around your ear for the best fit Point the headset towards your mouth Make and receive calls To make and receive calls using your headset you need to connect it to your phone Make a call Make a call in the normal way Answer a call Press End a call Press Reject a call Press twice Switch a call between your headset and phone Press and hold for 2 seconds You can redial the last called number or use voice dialling if your phone supports these features with the headset Redial the last called number When no call is in progress press twice Use voice dialling When no call is in progress press and hold for 2 seconds and follow the instructions in the user guide of your pho
8. rger Charger plug type may vary The plug variant is identified by one of the following E X AR U A C K or B The battery can be charged and discharged hundreds of times but it will eventually wear out Talk and standby times are estimates only Actual times are affected by for example device settings features being used battery condition and temperature If the battery has not been used for a long time to begin charging you may need to connect the charger then disconnect and reconnect it If the battery is completely discharged it may take several minutes before the charging indicator is displayed When your charger is not in use unplug it from the electrical plug and the device Do not leave a fully charged battery connected to a charger as overcharging may shorten the battery s lifetime If left unused a fully charged battery will lose its charge over time Always keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Recycle when possible Do not dispose as household waste Use the charger for its intended purpose only Improper use or use of unapproved chargers may present a risk of fire explosion or other hazard and may invalidate any approval or warranty If you beli
9. rks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners 2011 2013 Nokia All rights reserved The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Nokia is under license The availability of products may vary by region For more information contact your Nokia dealer This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited Issue 1 2 EN
Download Pdf Manuals
Related Search