SwissVoice L7
Contents
1. If you face any issue with your cordless phone please first visit our website www swissvoice net or send an email to helpline swissvoice net Approval and conformity This analog telephone DECT complies with the basic requirements contained in the R amp TTE Directive 1999 5 EC on radio equipment and telecommunications terminal equipment and is suitable for connection and operation in the member state indicated on the base station and or packaging The declaration of conformity may be viewed at www swissvoice net The CE symbol confirms the conformity of the telephone with the above directive www swissvoice net Swissvoice SA 2013 All rights as well as delivery possibilities and technical changes reserved 20407112en_ba_a0 SV 204071122. 2 Press OK 3 When the other handset answers press Join to connect all three callers to begin the conference call 4 If there is no answer from the other handset press to return to your external caller 5 Press the End Call key to end the call 3 5 5 Push To Talk Internal broadcasting voice This Push To Talk feature allows you to broadcasts to the base and every L7 handset Using PTT is a one way communication Message cannot be heard from non L7 handsets 1 Press and hold PTT key Wait 2 seconds while units connect tone will play 2 Begin speaking Release PTT key to finish the broadcast 3 6 Hands free speakerphone Hands free lets you talk to your caller without holding the handset It also enables other people in the room to listen to the conversation 3 6 1 Make a hands free call 1 During a call press the PTT key to engage hands free mode 1f icon is displayed and you hear the call over the handset loudspeaker 2 Press PTT key to switch the call between the earpiece and hands free 3 Press the End Call key to end the call NOTE During a hands free call press up or down side keys to adjust the volume 3 6 2 Answer a call hands free When phone is ringing press PTT key 3 7 Redial The last 20 entries dialled are stored in the redial list 1 In standby mode Press to open the Redial list 2 The last number dialled is highlighted 3 Scroll or to the entry you want 4 Press the
3. possible The charge capacity of rechargeable batteries will reduce with time as they wear out giving the handset less talk standby time Eventually they will need to be replaced After charging your handset for the first time subsequent charging time is about 6 8 hours a day Date and time If you have subscribed to a Caller ID Service the date and time is set automatically for all handsets when you receive your first call If you do not have a Caller ID service you can set the date and time manually see chapter Settings Set the date and time Your L7 is now ready for use All talk and standby times are approximate and depend on features selected and usage pattern 2 Getting to know your phone Overview of your handset ci J tor A 30 0010 1 veooso H 000000 000000 000000 ES A y NI i S e i m 3 4 f E l 5 E d 6 Poe 7 E eee ce a 6 e eras Oo Earpiece 2 Display 3 Redial list Scroll up Pause In standby mode press to open the redial list Scroll up through lists and menus Press and hold to enter a pause P when pre dialling or storing numbers 4 Menu OK Mute Left softkey In standby mode press to open the Menu Press to select menu options and to confirm a displayed option During a call
4. duration of your talk time is shown for 5 seconds 3 1 Switch the handset on off Press and hold the End Call key to switch the handset on or off 3 2 Make Calls Preparatory dialling 3 2 1 Make a call 1 Press the Talk key 2 When you hear the dial tone dial the number 3 2 2 Preparatory dialling 1 Dial the number first If you make a mistake press Clear to delete the last digit 2 Press the Talk key to dial the number NOTE To enter a pause P when pre dialling see chapter Contacts Add new entries in the Contact list 3 2 3 Make a call using Fast Call keys Press and hold the relevant keypad number to dial the pre stored number directly NOTE To store a Fast Call number see chapter Contacts Edit the Contact list using the menu Contact 3 2 4 Endacall Press the End Call key or place the handset back on the base or charger 3 2 5 Receive a call When you receive an external call the phone rings and External Call appears If the handset is off the base press the Talk key to answer the call if the handset is on the base simply lift the handset to answer the call NOTE If you prefer to press the Talk key when you lift up the handset to answer a call you need to switch Auto Talk off see chapter Settings Handset settings 3 3 Adjust the earpiece volume During a call press or to increase or decrease the volume 8 levels 3 4 Secrecy You can mute your handset so that
5. place the handset on the charger e If you are charging the battery for the first time charge for at least 24 hours e When the handset is fully charged mmm icon is steady on Connecting the charger Connect the charger as shown in the figure below Switch on the mains power je T T ED Only for multiple packs 1 If you have purchased a multiple pack you need to connect each charger and install and charge every handset 2 When an additional handset is fully charged mmm icon will appear and the display shows HANDSET and handset number e g 2 to indicate that it is registered to the base IMPORTANT Warning Use only the approved rechargeable Li lon battery cell Swissvoice C0487 or 043048 3 7V 550mAh 2 04Wh supplied with your L7 BATTERY LOW WARNING If you hear a warning beep every 30 seconds during a call you need to recharge the handset before you can use it again When charging m icon will scroll on the display BATTERY PERFORMANCE In ideal conditions fully charged batteries should give up to 10 hours talk time or up to 150 hours standby time on a single charge Note that new batteries do not reach their full capacity until they have been put to normal use for several days To keep your batteries in the best condition leave the handset off the base for a few hours at a time Running the batteries right down at least once a week will help them last as long as
6. you can talk to someone nearby without your caller hearing 1 During a call press Mute Mute On appears and your caller cannot hear you 2 Press Off to resume your call 3 5 Intercom and Push To Talk 3 5 1 Make an internal call If you have more than one handset registered to the base you can make internal calls between two handsets Internal Call and Handset X displays to indicate an internal call 1 Long Press followed by the number of the handset you want to call 2 Press OK 3 In starting intercom when there is no answer from other handset the intercom can be ended by press the END Call key instead of key 0 3 5 2 Receive an internal call When you receive an internal call Internal Call and Handset X is displayed Press the Talk key to answer the call 3 5 3 Transfer a call You can transfer an external call to another handset registered to the base During an external call 1 Long press followed by the handset number that you want to transfer to 2 Press OK 3 When the other handset answers press the End Call key to complete the transfer NOTE If there is no answer from the other handset and you wish to return to your external caller press 9 3 5 4 3 way conference call You can hold a 3 way conference call between 2 internal callers and 1 external caller During a call with an external caller 1 Long press followed by the handset number 1 5 that you want to establish a conference call
7. SWISSVOICE L Safety precautions Caution Warning danger statement follow safety precautions D Please note that the ringer for incoming calls as well as signal tones are emitted on the handset loudspeaker Do not therefore hold the handset close to your ear while one of these functions is on otherwise your hearing may be affected Use only one of the supplied mains adapter 6 VDC 400 mA for the base station Rechargeable batteries Use only the approved rechargeable Li lon battery cell Swissvoice C0487 or 043048 3 7V 550mAh 2 04Wh supplied with your L7 Using other rechargeable batteries or non rechargeable batteries primary cells can be dangerous and cause malfunctions in or damage to the telephone To insert the batteries please follow the instructions in the chapter entitled Installing and charging the handset Please note gt Do not immerse the batteries in water or throw in the fire Rechargeable batteries can become warm while recharging This is normal and not dangerous Do not use any other type of charging unit since this may damage the batteries The handset must not be charged up without batteries or the battery cover in place Before using the telephone wearers of hearing aids should note that radio signals can be picked up by the hearing aid and cause an unpleasant buzzing noise The radio signals may influence the working of medical equipment Do not use your DECT cor
8. Talk key to dial the entry or press Back to return to standby NOTE If the caller s number exactly matches an entry stored in the phonebook the name is displayed Press twice left key to see the caller s number 3 7 1 Edit Redial list 1 Open the Redial list select the desired entry press softkey Options Select a function from the following list Show details Save Number Add a Redial list number to the phonebook Delete Call 4 Using the Base NOTE Base can be used for answering calls or call handsets in hands free mode It cannot generate outgoing calls 4 1 Switch the Base on Base is automatically ON when it is powered To switch the base off disconnect the power adaptor 4 2 Answer end calls hands free Press PTT key to answer end a call NOTE During a hands free call press or to adjust the volume 4 3 Adjust the earpiece volume During a call press or to increase or decrease the volume 8 levels 4 4 Intercom and Push To Talk 4 4 1 Make an internal call If stand by mode with a short press on PTT key every handset will ring and communication is established with the first one answering 4 4 2 Receive an internal call When you receive an internal call press PTT key to answer the call 4 4 3 Transfer a call You can transfer an external call to another handset registered to the base During an external call 1 Long Press PTT key 3 seconds The external party is put on hold and ever
9. an be recorded and the outgoing message is automatically set to Answer Only To delete all old messages 1 Press Menu the display shows Answer Machine press Select 2 Scroll to Delete Messages and press Select 3 Display shows Delete All Old Messages Press Yes to confirm or No to cancel 9 11 Answering machine settings 1 Press Menu the display shows Answer Machine press Select 2 Scroll to Answer Settings and press Select Select a function from the list Language Select the language for default outgoing messages Answer Mode Select Answer amp Record or Answer Only Then select Default OGM prerecorded on delivery or Personal OGM If there is no personal outgoing message saved the pre recorded outgoing message will be selected automatically Answer Delay Select 2 4 6 8 rings or Time saver mode If Time Saver is set the answering machine answers after 2 rings during remote access if you have new messages If you do not have new messages it answers after 6 rings This means you can hang up after 3 rings saving you time and the cost of the call Message Alert When you have new messages with the audible message alert switched on you hear an audible alert once at the handset and the answering machine base beeps every 10 seconds Remote Access Switch remote access on or off Change the remote access PIN 9 12 Remote access Remote access allows you to operate your answering machine and listen to your messag
10. arted ccceeseeeeeeeeeseeeeeeeeeseeeeseeeeeenes 7 Getting to know your Phone s ccesseeeseeeees 10 Using the plone 2 2 ccecceeeeeeeeeeeneeeneeeeeeeeeeeeees 13 3 1 Switch the handset on Off ceccesceeceeceeeeeeceeseeeeeeeeseeeeeeteeereeneeneees 13 3 2 Make Calls Preparatory dialling 0 0 0 eceeeceeeeeeeeeeeeeeeteeeeeeeaees 13 3 3 Adjust the earpiece VOIUME c ececceeeeeseeeeeeeeeneeneeeennneneeaee 13 3 4 Secrecy 3 5 Intercom and PUSh TO TalK ceceeeceseeeeseeeeeeeeeeeeeeaeeseeeeeeeeeeetenee 3 6 Hands free speakerphone xu cicesc stew sconaniviesnetieiabwereie ens B87 Redial wachidncnndiiiddd i E RE RRE Using the BaSe ccccssseeeeceeesseeeeeeeeessneeeeeeeesenes 4 1 Switch the BaSe OM oly eS T ea a ae 4 2 Answer end calls hands free is 4 3 Adjust the earpiece VOIUME eee ete te eee testes tee teeeteteneeetaee 4 4 Intercom and PUSh TO TalK ceceeeeeeeeeeeeeeeeeeeeeeeeeaeeeeeeeeneeeaeetenee Contacts 5 1 Add new entries in the Contact list ceccesceeseeceseeeeteeeeeeseeeeeees 16 5 2 Edit the Contact list using the softkey Names cece 17 5 3 Edit the Contact list using the menu Contact eect 17 Calls listo ennes enaa aeeai aE a Ee fee 6 1 New calls alatti esi are aene aeeiiaii isdi aaier aana 6 2 Diala number in the Calls list di 6 3 Delete the entire Calls list 0 eee eee eeeeeeeeeeeeetae
11. croll to Set Base and press Select 3 Select a function from the following list Ringtone Select from 2 base ringtones Ringer Volume The base has 5 ring volume settings plus Off Dialling Mode Select Pulse or Tone dialling Ring Priority When you have more than one handset registered to your base you can set one handset to ring before the other handsets This allows one handset user to answer all incoming calls first for example the receptionist Choose All Handsets if you want all handsets to ring at the same time or Select Handset to nominate a handset to ring before the other handsets ring Recall Mode Recall is useful to access certain network services and PABX switchboard services The use of the L7 cannot be guaranteed on all PABX Ask your network operator for more details System PIN The System PIN is required when changing certain settings and for registration de registration The default setting is 0000 You can change this to your own preferred number up to 8 digits NOTE Note your new PIN code and keep it somewhere safe Master Reset You can restore the L7 to its default original settings Resetting the L7 will not affect the phonebook or Calls list and all handsets registered to the base will be retained Only the handset and base settings are reset ECO mode Your L7 offers an ECO mode function which reduces the transmitted power and energy consumption when switched on This feature is se
12. dless telephone in environments at risk from explosion e g paintworks petrol stations etc gt Do not position your L7 in bathrooms or showers Inthe event of a power cut or if the batteries are discharged your DECT cordless telephone will not function Do not touch open contacts Disposal Please dispose of batteries base station handset and mains units in an ecological manner Do not dispose of them in domestic waste IMPORTANT Only use the telephone line cord supplied Use only the approved rechargeable Li lon battery cell Swissvoice C0487 or 043048 3 7V 550mAh 2 04Wh supplied with your L7 as well as the original power supply 6 0VDC 400 mA Got everything e Cordless handset and its charging bay e Cordless base e 1x rechargeable Li lon battery cell 2x Power adaptors for the base and the charging bay e Telephone line cord If you have purchased a L7 multiple pack you will also have the following additional items Cordless handset amp charger e 1x rechargeable Li lon battery cell e Power adaptor for the charger Welcome to Swissvoice The L7 is a cordless telephone designed for connection to an analog telephone network International DECT GAP standard digital technology offers excellent voice quality Please note that this equipment is not designed for making emergency telephone calls when the power fails Alternative arrangements should be made for access to emergency services Getting St
13. e Placing it as high as possible ensures the best signal HANDSET RANGE The unit has a range of up to 300 meters outdoors when there is a clear line of sight between the base and handset Any obstruction between the base and handset will reduce the range significantly With the base indoors and the handset either indoors or outdoors the range will normally be up to 50 meters Thick concrete and stone walls can severely affect the range SIGNAL STRENGTH The F icon on your handset indicates that you are within range of the base When out of range of the base the F icon flashes If you are on a call you will hear a warning beep The line will hang up if the handset moves out of range of the base Move closer to the base Setting up IMPORTANT The base station must be plugged into the mains power at all times Do not connect the telephone line cord into the wall socket until the handset is fully charged Use only the power adaptor and telephone line cord supplied with the product Connecting the base Connect the base as shown in the figure below Switch on the mains power Installing and charging the handset e Remove the battery cover from the back of the handset and insert the rechargeable Li lon battery cell supplied Make sure that the battery is inserted correctly observe battery jack inside battery compartment Press down Slide Connect the charger as shown below and
14. eceived Calls Dialled Calls you want press Select to confirm 3 Scroll or to the entry you want 4 Press the Talk key to dial the number 6 3 Delete the entire Calls list 1 Press the display shows Calls Lists press Select 2 Scroll to Delete Calls and press Select 3 Scroll or to highlight the Calls list Missed Calls Received Calls Dialled Calls or All Calls you want 4 Display shows Delete All Calls Press Yes to confirm 6 4 Edit the Calls list 1 Open the desired Calls list select the desired entry press Options Select a function from the following list Show Details Show the date and time of the call Save Number Add a Calls list number to the phonebook Delete Call 7 Settings 7 1 Set the date and time 1 Press Menu scroll to Settings then Date amp Time and press Select 2 Enter the date using the format DD MM YY e g 04 08 12 for 4 August 2012 and press Save 3 Enter the time HH MM and press Save If the current time format setting is 12 hour select am or pm NOTE The date and time is retained during a power failure or when the batteries are discharged 7 2 Handset settings 1 Press Menu scroll to Settings and press Select 2 Set Handset is highlighted Press Select 3 Select a function from the following list Ringtone You can set different ringtones for external calls and internal calls Select from 11 handset ringtones You hear a sample ring as you
15. eeseetseeeneersnees 64 Edit the Calls list ec snin aie AE r Settings 7 1 Set the date and Meee a a aa ae pi 1 2 Handset SENS iinne i EKE 7 3 Base settihgs suonen enerne a Aan na oe iaaa aaee eenaa T ai Additional handsets snssssssnnnnunnnnnnnnnnnnnnnnnnnnnn 8 1 Registering an additional handset s sssneseneesrernerennsnnenenereee 21 8 2 Select a base 0 8 3 De regist r a handset wens cs nesiates teases nnpeenusneceennnnsededeecdsieasney secon 22 Answering MACHINE cccceseeseeeeeeseeeeeeeeeeeeeeeeeees 22 9 1 Overview Of the bases riean e N e it 23 9 2 Switch the answering machine on off eeeeeeereressierererererereenene 24 9 3 New MESSAGES alert agiccsicia sesesdkisrsssassbceceascgeas Ganqaaeacat gaananeceuctaeess 24 Record personal outgoing messages Play or delete your personal outgoing message Set the answer mode Record a memo Call screening Message playback Delete all old messages Answering machine settings Remote access 1 Getting started Location Place your L7 base within 2 meters of the mains power socket and 1 8 meters from the telephone wall socket The socket outlet shall be installed near the equipment and shall be easily accessible Make sure that it is at least 1 meter away from other electrical appliances to avoid interference Your L7 works by sending radio signals between the handset and base The strength of the signal depends on where you place the bas
16. elected entry to another handset Ringtone Assign the desired ringtone Delete Entry Delete the selected entry from the Contact list Fast Call Store a Fast Call number scroll or to Key X where the entry will be stored press Select Assign is highlighted press Select to confirm Delete a Fast Call number select Clear Entry and press Select to confirm 6 Calls list If you have subscribed to Caller ID service and provided the identity of the caller is not withheld the number of the caller is displayed if provided by the network NOTES The Calls list can contain of up to 50 calls New calls are displayed with E y If the caller s number is stored in your contacts the name will also be displayed The Calls list contains details of missed and received call Entries are displayed in chronological order with the most recent call at the top of the list When the list is full and a new call is received the oldest entry is deleted automatically If you receive more than one call from the same number only the most recent call is kept in the Calls list 6 1 New calls alert When you have new missed calls the display shows You have X New calls 1 Press Back The screen returns to standby and the icon Lx is displayed or 2 Press View to see details of the call 6 2 Dial a number in the Calls list 1 Press the display shows Calls Lists press Select 2 Scroll or to highlight the Calls list Missed Calls R
17. er A pause is normally stored after the switchboard access code e g 9 Press and hold 4 to insert a pause the display shows P WRITING TIPS To enter a space press Press or to move between characters digits Press Clear to delete a character or press and hold Clear to delete all characters 5 2 Edit the Contact list using the softkey Names 1 In standby press softkey Names 2 Scroll or to the entry you want or search alphabetically entering the first letter of the name 3 Press the Talk key to dial the displayed entry Or 4 Press Options and select a function from the following list Search Enter the first letter of a name to search alphabetically e g if the name begins with N press twice Add entry Add a new entry in the Contact list Copy Phonebook Copy the entire Contact list to another handset If an entry with the same number is already stored in the receiving handset it will not be copied Memory Status Display the used and free Contact list memory Delete Phonebook Delete all entries in the Contact list 5 3 Edit the Contact list using the menu Contact 1 Press softkey Menu select Contact 2 Select Search then scroll or to the exact entry 3 Press Options and select a function from the following list Show Details Show name number and melody of the selected entry Edit Entry Edit name number and melody of the selected entry Copy Entry Copy the s
18. es by calling the L7 from another phone Remote operation can only be performed after having switched on the function see chapter Answering machine settings 1 Call your L7 When you hear the announcement press 2 Enter your 4 digit remote access PIN default setting 0000 You hear a confirmation beep NOTE Change the remote access PIN for security reasons see below 3 All new messages are played back 4 Use the following keys to operate your answering machine To enter remote access mode 2 To play all messages 3 To play new messages 4 To skip back during messages 5 To delete during messages 6 To skip forward during messages 9 To switch answer machine off 0 To switch answer machine on NOTE If you enter an incorrect PIN code you hear two error beeps Try again If it is still incorrect you hear a single error beep and the L7 hangs up 9 13 Change the remote access PIN The default remote access PIN is 0000 Change the remote access PIN code for additional security 1 Press Menu the display shows Answer Machine press Select 2 Scroll G to Answer Settings and press Select 3 Scroll or to Remote Access and press Select 4 Scroll or to Set Remote PIN and press Select 5 Enter the old PIN and press Save default setting 0000 6 Enter the new PIN and press Save 7 Re enter the new PIN and press Save NOTES This PIN is different from the System PIN used when resetting the unit or when registe
19. ll used batteries and accumulators must be recycled and not disposed of in domestic waste Please dispose of them according to the official regulations Take them to a recycling depot The batteries accumulators will be recycled since they may for example contain lithium Li nickel cadmium Ni Cd lead Pb cadmium Cd or mercury Hg The batteries and accumulators are labelled with symbols and information on their contents Warranty conditions Your telephone is subject to a guarantee from the date of purchase in accordance with the legal provisions of the country in which the telephone was purchased As evidence of the date of purchase please keep the receipt or the warranty card completed by the retailer All defects attributable to material and manufacturing faults will be corrected free of charge within the warranty period either by repairing or replacing the defective equipment The warranty does not cover expendable materials battery cells defects which affect the value or use of the equipment only insignificantly and damage caused by incorrect use ordinary wear and tear or manipulation by third parties This warranty does not cover consequential damage caused by the use failure or defectiveness of the product In particular no liability whatsoever is accepted for damage to property and pecuniary loss To claim under this warranty please contact the retailer where you purchased your telephone Service Customer Care
20. messages The L7 comes with 2 pre recorded outgoing messages in different languages You can record personal outgoing messages up to 3 minutes long You can select 2 operating modes Answer amp Record your caller can leave a message Answer Only your caller cannot leave a message Press Menu the display shows Answer Machine press Select Scroll to Outgoing Message and press Select Record is highlighted press Select Select Answer amp Record or Answer Only and press Select Speak your message after the tone Press Save to end recording oar WD Your outgoing message is played back If you want to delete it press Delete during playback 9 5 Play or delete your personal outgoing message Deleting a personal outgoing message automatically reinstates the pre recorded outgoing message You cannot delete a pre recorded message Press Menu the display shows Answer Machine press Select Scroll to Outgoing Message and press Select Scroll to Play and press Select Scroll or to Answer amp Record or Answer Only then press Select Scroll to Personal OGM and press Select oar WDM The message is played Press OK to stop playback or press Delete to delete the message 9 6 Set the answer mode See chapter Answering machine settings 9 7 Record a memo You can record a memo which is stored on your answering machine and played back like a normal message 1 Press Menu the di
21. ons are pressed for 30 seconds or the handset is placed on the charger the handset returns to standby if screensaver mode is OFF and to screensaver mode if the function is ON Press any key to return to standby mode Handset LCD Display T Hdi mm SHISSVOLCE MEM NAMES F Steady when the handset is registered and within range of the base Flashes when handset is out of range or searching for the base T Displays when ECO mode is on Zero Emission mode is off the icon should be antenna E Displays when ECO mode is off Zero Emission mode is on the icon should be antenna leaf Fine Displays when ECO mode is on Zero Emission mode is on the icon should be antenna leaf E E fl Handset ringer volume is Off afi Displays when in hands free mode m The keypad is locked Displays when answering machine is on Ls Displays when you have missed calls and new number s in the Calls list BZ Displays when you have new answering machine messages The approximate power levels of your battery are indicated as follows L Battery is fully charged mm Battery is partially charged O_ Battery is running low For this feature to work you must subscribe to Caller ID Service from your network operator A subscription fee may be payable 3 Using the phone NOTE Your handset automatically times the duration of every external call the call timer will display on the screen When the call ends the total
22. ork operator The caller may have withheld their number The record cannot be found in your phonebook Check that you have the correct name number stored in your phonebook with the full area code have forgotten my PIN Remove one battery press and hold the star button on the handset and replace the battery The display shows Master Reset press OK The handset will automatically reset and the PIN will default back to 0000 Cannot register a handset to the base You can register up to a maximum of 8 handsets to a L7 base You must de register a handset in order to register a new one e Check that you have entered the correct PIN code default 0000 Check that you are at least one meter away from other electrical equipment to avoid interference when registering Handset does not ring The handset ringer volume may be set to Off Base unit does not ring The base ringer volume may be set to Off Noise interference on my phone or on other electrical equipment nearby Place your L7 at least one meter away from electrical appliances or any metal obstructions to avoid any risk of interference 11 General information Using Internet cable telephone adapters on an analog port When using an analog telephone on the analog connection of an Internet or cable telephone adapter not all the described features in particular calling line display may function in the same way as with a standard analog telephone line This doe
23. press to turn mute on off 5 Talk key Make or answer a call 6 Received calls list Scroll Down Press to review calls list Scroll down through lists and menus 7 Voice Mail 1 key In standby mode long press to speed dial voice mail number 8 Recall Key Long press to activate recall function R during a communication 9 Intercom 0 key Long Press to make private internal call between multiple handsets 10 Contacts Clear Back Right softkey In standby mode press to open the Contact list 11 End Call key Exit Handset on off End a call When in a menu return to standby mode In standby mode press and hold to switch handset on off 12 Ringer on off key 13 Microphone 14 Volume keys During a call press to increase or decrease the earpiece and hands free volume When the phone is ringing press to increase or decrease the handset ringer volume 15 Loudspeaker for ringtone hands free and intercom 16 Push to Talk Intercom Press and hold to broadcast to all units Navigating the menu Your L7 has an easy to use menu structure When the handset is in standby 1 Press softkey Menu The main menu is opened 2 Then use or buttons to scroll through the menu 3 Press softkey Select to open a sub menu or validate an option Press softkey Back to go back to the previous menu level correct a character or cancel an action 4 Press the End Call key to return to standby NOTE If no butt
24. re already 8 handsets registered to the base registration will fail You must de register a handset before you can register a new one 8 2 Select a base You can register the L7 handset with up to 4 bases 1 Press Menu scroll to Registration and press Select 2 Scroll to Select Base and press Select 3 In use is shown beside the base number where the handset is registered to Select the desired base and press Select 4 The display shows Searching Base X When registration is complete the handset returns to standby 8 3 De register a handset Use one handset to de register another You cannot deregister the handset that you are using 1 Press Menu scroll to Registration and press Select 2 Scroll to De register and press Select 3 Enter the System PIN 0000 on delivery and press OK 4 Select the handset you want to de register press Select Press Yes to confirm or No to cancel 9 Answering machine The L7 has a recording capacity of 25 minutes Each message can be up to 3 minutes long You can operate your answering machine from the base the handset and remotely from another phone 9 1 Overview of the base A LED Indicates when the answering machine is on or off and when you have new messages LED is blinking B Answering machine On Off Switches the answering machine on off Press and hold to enter the outgoing me
25. ring de registering handset It is advisable to make a note of your new PIN code and keep it somewhere safe If you reset your L7 your remote access PIN will default to 0000 10 Help No dial tone Use only the telephone line cord supplied e Check that the telephone line cord is connected properly e Check that the mains power is connected properly and switched on ne display Check that the batteries are inserted correctly and fully charged Use only approved rechargeable batteries supplied Check that the handset is switched on Press and hold the End Call key Reset the base by removing the batteries and disconnecting the mains power Wait for around 15 seconds before connecting it again Allow up to one minute for the handset and base to synchronize T icon flashes Handset is out of range Move closer to the base Make sure that the handset is registered to the base see chapter Registering an additional handset Check that the mains power is connected properly and switched on Keypad does not seem to work e Check that the keypad lock is not on icon is not scrolling during charge Adjust the handset slightly on the base Clean the charging contacts with a cloth moistened with alcohol e Check that the mains power is connected properly and switched on e The battery is full When the handset is fully charged mmm icon is steady on No Caller ID Check your subscription with your netw
26. s not cause the L7 to malfunction Several factors can cause a failure of specific features to function The Internet cable telephony provider may not provide the function on its Internet cable telephony connection The adapter used to convert Internet cable telephony to analog telephony usually supplied by the provider may not forward the functions to connected telephones or may forward them in a non analog format If this happens please check the L7 on an analog fixed line and or contact your Internet cable telephony provider Care Your telephone is a sophisticated product in terms of design and construction and should therefore be handled with care To clean the telephone wipe first with an antistatic cloth or a damp soft leather cloth and then dry using a dry cloth Recycling environmental protection At the end of the product s life cycle the telephone must not be disposed of in normal domestic waste Please take it to a collection point for processing electrical and electronic equipment see symbol on the product in the user manual and or packaging Some materials used in this product can be recycled if you take it to a recycling depot By recycling parts or raw materials from used products you will be making an important contribution to environmental protection Please contact your local authority if you require information about collection points in your neighborhood Disposing of the rechargeable battery By law a
27. scroll to each ringtone Ringer volume The handset has 5 ringer volume settings plus Off If the volume is set to Off is displayed NOTE When the phone is ringing you may press Silence to silent the ringer for that call Receiver volume Set the volume level for the handset earpiece 8 levels Handset name If you are using more than one handset with the L7 base you can give each handset a personal name to easily distinguish between the handsets Aname can be up to 10 characters long Language Choose the language for the display texts Screensaver Activate or deactivate the screensaver Auto talk With Auto Talk switched on you can answer a call just by lifting the handset off the base or charger If switched off you will have to press the Talk key to answer a call Key beep When the key beep function is turned to on you hear a beep with each key press PBX access Code If the L7 is connected to a switchboard you may need to enter an access code in the dialling sequence to be able to connect to the outside line The access code is displayed at the beginning of a number The code can be up to 4 digits long The access code will not be used when you dial the number manually such as when you are not dialling from the phonebook This allows you to make calls to other switchboard extensions 7 3 Base settings The system PIN on delivery is 0000 1 Press Menu scroll to Settings and press Select 2 S
28. splay shows Answer Machine press Select 2 Scroll to Record Memo and press Select 3 The display shows Please speak after the tone 4 After your hear the tone speak your memo then press Save to end recording 5 Your memo is played back Press Delete during playback to delete the memo or press Save to save it 9 8 Call screening When the answering machine is on and takes a call you can use the loudspeaker to listen to identify the caller and decide whether to take the call in person 1 When the handset rings wait for the answering machine to take the call When the caller begins leaving a message the display shows Recording Press Screen to hear the caller 2 To interrupt and speak to the caller directly press the End Call key NOTE While screening you can adjust the volume by pressing or 9 9 Message playback Each message is played back with day and time of the call announced The caller s number is displayed if stored in the phonebook the name is displayed 1 Press Menu the display shows Answer Machine press Select 2 Play is highlighted Press Select to play single messages or Play All to play all messages 3 During playback press Options Select Pause Repeat Message Skip Forward Skip Backward or Delete 4 Press Back to return to the previous menu level 9 10 Delete all old messages The recording capacity of your answering machine is 25 min If the memory is full no more messages c
29. ssage selection mode Then press key C to select Answer amp Record outgoing message or key G to select Answer Only outgoing message Press key F to delete personal OGM during OGM playback The pre recorded OGM is selected and played C Skip back Repeat message Press twice to return to previous message D Volume Down Decrease speaker volume during message playback E Play Stop Play or stop playback of recorded messages F Delete Delete current message Personal Outgoing message during playback deleting a personal outgoing message automatically reinstates the pre recorded outgoing message G Skip forward Press to next message H Volume Up Increase speaker volume during message playback I Intercom and Push To Talk In standby short press to call the handset s Press and hold to broadcast to every L7 handset J Bottom key Page and Register key Press and hold to enter registration mode when registering handsets 9 2 Switch the answering machine on off 1 Press Menu the display shows Answer Machine press Select 2 Scroll _to Answer On Off and press Select Select Off or On and press Select 9 3 New messages alert When you have new messages the display shows You have X new messages If you press Back the screen returns to standby and the icon SZ is displayed Press Play and scroll or to the message you want to play Press Play to hear the highlighted message 9 4 Record personal outgoing
30. t to Off by default T c SHISSVOCE MENU MAMES NOTE When ECO Mode is set to On the F is replaced with the fg and the handset range will be reduced Zero Emission Common cordless phones continue to transmit a radio signal even while the phone is idle Swissvoice offers Zero Emission for not adding electro smog when not needed NOTE When Zero Emission is set to On the F is replaced with the Yq When both ECO Mode and Zero Emission is set to On the icon is replaced with the Fie 8 Additional handsets 8 1 Registering an additional handset You can register up to 8 handsets to your base station NOTE Additional handsets must be registered to the base before you can use them Handset batteries must be fully charged before you start to register Hold your handset close to the base during the registration process Handsets supplied with your L7 base are already preregistered On the base Press and hold key on bottom of base until the base emits a double beep The base remains in registration mode for 90 seconds On the handset 1 Press Menu scroll to Registration and press Select 2 Register HS is highlighted Press Select 3 Bases are displayed Select the desired base and press Select 4 Enter the system PIN 0000 on delivery and press OK 5 The display shows Searching Base X When registration is successful the display shows Handset Registered and you hear a confirmation beep NOTE If there a
31. y handset will ring 2 If you short press PTT key the external call is transferred to handsets and base is not ringing anymore As soon as one handset answers it is in communication with the external party NOTE If there is no answer from the other handset and you wish to return to your external caller long press PTT key 4 4 4 Push To Talk Internal broadcasting voice message This Push To Talk feature allows you to broadcast from the base to every L7 handset Using PTT is a one way communication Message cannot be heard from non L7 handsets 1 Press and hold PTT key Wait 2 seconds while units connect tone will play Begin speaking 2 Release PTT key to finish the broadcast 5 Contacts You can store up to 100 names and numbers in the Contact list Names can be up to 16 characters long and numbers up to 24 digits You can also select different ringer melodies for different contacts entries 5 1 Add new entries in the Contact list 1 Press softkey Names Press Options 2 Scroll to Add Entry and press Select 3 Enter a name and press OK enter a number and press Save 4 Scroll or to the melody you want and press Select The entry is stored NOTES When the Contact list is empty you cannot enter the first entry using the softkey Names you must enter it over the menu Press Menu scroll to Contact then to Add entry Ifthe L7 is connected to a switchboard you may need to enter a pause ina numb
Download Pdf Manuals
Related Search