Verilux EasyFlex
Contents
1. Note Be sure all styrofoam packing is removed from the bulb area prior to installing the light diffuser VFO2 MAN Rev14 indd 8 12 29 11 4 25 PM Bulb Replacement Removal 1 Unplug the lamp from the power source and allow bulb to cool 2 To access the bulb remove light diffuse by depressing the tab and lifting it out Fig 7 3 Firmly hold the bulb base B and pull bulb C from the socket A in an outward motion Fig 8 Installation 1 Unplug the lamp from the power source B 2 Firmly hold the base B and push bulb into the socket A 3 Be sure the bulb is firmly seated in the socket Fig 9 and snapped into the metal bulb clip D 4 Replace the light diffuser Attention Do not grip the bulb by the glass tubes Only touch the base when removing or inserting the bulb Fig 8 Correctly Seated Bulb Incorrectly Seated Bulb Fig 9 VFO2 MAN Revi4 indd 9 12 29 11 4 25 PM Troubleshooting Before requesting service on your Verilux lamp please read the following e Make sure all power connectors cords and plugs are inserted fully and securely e Be sure the bulb is securely seated into the socket see page 9 e Make sure there is power to the wall outlet or try another outlet PROBLEM Light won t come on CHECK Has the plug come loose SOLUTION Insert plug securely into wall outlet Is the bulb old Check the bulb for blackening darkening2. EasyFlex Deluxe Natural Spectrum Floor Lamp VFO2 MAN Rev14 indd 1 12 29 11 4 24 PM NETIIUX The Healthy Lighting Company Est 1956 Dear Customer Thank you for purchasing the Verilux EasyFlex Deluxe Natural Spectrum Floor Lamp You have received a quality product backed by a one year limited warranty As a Verilux customer your satisfaction means everything to us We look forward to serving you now and in the future Many other healthy lighting products are available through our catalog and online Visit us on the web at www verilux com to request a free catalog and learn more about all our quality Verilux products or call us toll free at 1 800 454 4408 Have a bright day Nicholas Harmon President Verilux Inc VFO2 MAN Revi4 indd 2 12 29 11 4 24 PM READ ALL INSTRUCTIONS BEFORE USING Important Safeguards A DANGER e Do not operate this lamp near a water source to avoid electrocution A WARNING e Do NOT dismantle e Do not use with power supply voltage other than 120 VAC e Do not operate lamp in close proximity to flammable or combustible vapors such as aerosol spray products or where oxygen is being administered e Do not cut or shorten the power cord e The bulb in this product contains a trace amount of mercury a chemical known to the state of California to cause birth defects or other reproductive harm This substance may also cause injury if inhaled or ingested A CAUTION
3. e For indoor use only e Always unplug lamp before performing bulb replacement or installation e This lamp is not for use with light dimmers timers motion detectors voltage transformers or extension cords e This product may cause interference with radios cordless telephones or devices that use a wireless remote control such as televisions If interference occurs move the product away from the device plug the product or device into a different outlet or move the lamp out of the line of sight of the remote control receiver e Unplug lamp during lightning storms or when unused for extended periods of time e Do not lift the lamp by the gooseneck The lamp should be lifted by the shaft e Bevery careful not to pinch any part of the cord between any metal pieces e Do not use solvents or cleaners containing abrasives or ammonia based cleaners on this product e All moisture should be properly wiped away and dried prior to restoring power e Do NOT use lubricating agent in assembly please see troubleshooting section if you are having difficulty assembling your lamp e Unplug lamp before adjusting shaft extension e Dispose of bulbs per local regulations For more information on clean up and disposal see www lamprecycle org e Care should be taken to prevent bulb breakage SAVE THESE INSTRUCTIONS 3 VFO2_MAN_Rev14 indd 3 12 29 11 4 24 PM VEUILLEZ LIRE L INT GRALIT DES INSTRUCTIONS AVANT TOUTE UTILISATION V
4. Remove all pieces from box being careful with the wiring that runs through the base and shafts 3 Locate the two screws and tightening tool in the plastic bag and set aside VFO2 MAN Revi4 indd 6 12 29 11 4 24 PM Assembly Instructions 1 Attach the lamp head gooseneck to the shaft until the screw holes line up as shown in Fig 1 Use care when tucking the wire into the shaft Insert the screw using the tightening tool and turn clockwise to tighten Close up of screw hole in the lamp head Fig 1 2 Hold the upper shaft with one hand and release the ergonomic height adjustment lever by gently pulling it upward as shown in Fig 2 Extend the upper shaft approximately 12 Lock the adjustment lever by gently pushing it downward Once assembly is complete raise or lower the upper shaft to the desired height by releasing and locking the height adjustment lever VFO2 MAN Revi4 indd 7 12 29 11 4 25 PM Assembly Instructions continued 3 Set the lamp base on the floor and insert the lamp shaft over the base support unit until the screw holes line up as shown in Fig 3 Insert the screw using the tightening tool and turn clockwise to tighten Close up of screw hole in the lamp base 4 Remove the light diffuser from the protective plastic bag Insert the plastic pegs at the bottom of the light diffuser in the openings near the bulb socket Snap the tab into place as shown in Fig 4
5. at the ends an indicator of bulb life and replace bulb Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process Blackening darkening at ends of bulb Is the bulb new Sometimes when a new bulb is turned on for the first time the tube will darken but this will fade after a few minutes Is the bulb old With older bulbs darkening of the tube indicates end of bulb life This doesn t affect operation except to reduce the amount of light available since the phosphor in that area has become inact ive Bulb replacement is recommended Light flickers VFO2_MAN_Rev14 indd 10 Has the plug come loose Insert plug securely into wall outlet Is the bulb connected securely to the socket Be sure the bulb is securely seated into the socket repeat the bulb installation process PERFORMING BULB CAUTION REPLACEMENT ALWAYS UNPLUG LAMP BEFORE OR INSTALLATION Is the lamp connected to a dimmer switch Connect lamp plug on 10 y to wall outlet w ithout a dimmer switch 12 29 11 4 25 PM Care amp Cleaning Your lamp is made from high quality materials that will last for many years with minimum care You may want to periodically clean the lamp using a mild non abrasive cleaner and soft cloth When cleaning make sure you have turned off and unplugged the unit and allowed su
6. call our Customer Service Department at 1 800 786 6850 Representatives are available Monday Friday 9am 5pm ET NETIIUX 340 Mad River Park Waitsfield VT 05673 Printed in China for Verilux Inc VFO2 MAN Rev14 Copyright 2012 Verilux Inc All rights reserved 12 VFO2 MAN Revi4 indd 12 12 29 11 4 25 PM
7. IND NN lei Jap e N utilisez pas cet appareil proximit d une arriv e d eau pour viter tout risque d lectrocution A AVERTISSEMENT e Ne pas d monter e Avant de brancher la lampe v rifier que la tension de la prise murale ne d passe pas 120 volts e Ne pas faire fonctionner la lampe proximit de vapeurs inflammables ou combustibles tels que les produits a rosol ou lorsque l oxyg ne est administr e Ne pas couper ou raccourcir le cordon d alimentation e Ce produit contient du mercure dans son ampoule suivre les reglements locaux pour la mise au rebut de l ampoule AMISE EN GARDE e Pour usage int rieur seulement e Ne pas utiliser avec des gradateurs de lumi re des minuteries des d tecteurs de mouvement ou des rallonges e Ce produit peut causer des interf rences avec des radios des t l phones sans fil ou des appareils utilisant une t l commande sans fil telle qu une t l vision e Si des interf rences se produisent loigner le produit de appareil brancher le produit ou l appareil dans une autre prise ou encore d placer la lampe hors de la ligne de vis e du d tecteur de t l commande e D brancher de la prise lectrique lorsque le produit ne sert pas pendant de longues p riodes ou lors d orages lectriques afin d assurer la protection des pi ces lectroniques e Ne pas soulever la lampe par son col de cygne La lampe doit tre soulev e par la tige e Pren
8. dre soin de ne pas pincer le cordon dans des pi ces m talliques e Toujours d brancher la lampe avant de remplacer ou de poser l ampoule e Ne PAS utiliser de produit lubrifiant lors de l assemblage voir la section de d pannage en cas de difficult lors de l assemblage de la lampe e Ne pas utiliser de solvants ni de nettoyants contenant des abrasifs ou de Pammoniaque e Toute humidit doit tre essuy e et s ch e avant de remettre la lampe sous tension e D brancher la lampe avant d effectuer son alignement CONSERVEZ CES INSTRUCTIONS 4 VFO2 MAN Revi4 indd 4 12 29 11 4 24 PM Getting Started Main Parts amp Controls Ergonomic Handle Lamp Head High Off Low Switch Gooseneck Shaft Ergonomic Height Adjustment Lever Lamp Base Power Cord Tray Bulb Parabolic Light Diffuser nmoowx gt Ker IO Close up of Lamp Head mj SHE SERA LA CAUTION DO NOT LIFT THE LAMP BY THE GOOSENECK THE LAMP SHOULD BE LIFTED BY THE SHAFT MISE EN GARDE NE PAS SOULEVER LA LAMPE PAR SON COL DE CYGNE LA LAMPE DOIT ETRE SOULEVEE PAR LA TIGE 5 VFO2 MAN Revi4 indd 5 12 29 11 4 24 PM Getting Started continued Please Read Instructions Carefully Before Using the EasyFlex 1 Unpack lamp carefully removing all packaging material and confirm you have all parts shown in the diagram For your convenience the bulb has been inserted into the socket 2
9. fficient time for the unit to cool All liquid should be properly wiped away and dried prior to restoring power CAUTION DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES OR AMMONIA BASED CLEANERS MISE EN GARDE NE PAS UTILISER DE SOLVANTS NI DE NETTOYANTS CONTENANT DES ABRASIFS OU DE LAMMONIAQUE CAUTION All moisture should be properly wiped away and dried prior to restoring power MISE EN GARDE Toute humidit doit tre essuy e et s ch e avant de remettre la lampe sous tension A CAUTION MISE EN GARDE ALWAYS lift your lamp by the shaft DO NOT lift the lamp by the gooseneck Toujours soulever Ne soulevez pas la votre lampe par lampe par le col de l arbre cygne 11 VFO2 MAN Rev14 indd 11 12 29 11 4 25 PM One Year Limited Warranty ATTENTION ONCE OPENED PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT Many questions may be answered by visiting www verilux com or you may call our Customer Service Department at 800 786 6850 during normal business hours This limited warranty is provided by Verilux Inc 340 Mad River Park Waitsfield VT 05673 Verilux warrants this product to be free from defects in material and workmanship for a period of one year from the date of the original retail purchase from Verilux or an authorized Verilux distributor Proof of purchase is required for all warranty claims During the limited warra
10. nty period Verilux Inc will at its option repair or replace defective parts of this product at no charge to the customer subject to the following limitations This limited warranty does not include any postage freight handling insurance or delivery fees This warranty does not cover damage defect or failure caused by or resulting from accident external destruction alteration modification abuse misuse or misapplication of this product This warranty does not cover damage to the product resulting from return shipping or handling The use of shipping insurance is recommended to help protect your product Return Authorization is required for all returns To obtain a Return Authorization please contact the Verilux Customer Service Department at 800 786 6850 If during the first year of ownership this product fails to operate properly it should be returned as specified at www verilux com warrantyreplacement or as instructed by a Verilux customer service representative at 800 786 6850 Note Verilux recommends using a quality surge suppressor on all electronics equipment Voltage variations and spikes can damage electronic components in any system A quality suppressor can eliminate the vast majority of failures attributed to surges and may be purchased at electronics stores Due to ongoing improvements actual product may have slight variations from the product described in this manual Please visit our website at www verilux com or
Download Pdf Manuals
Related Search