Raidon R2420-B3 storage enclosure
Contents
1. 20 will still complete the rebuilding function However it will not change to Standby mode after rebuilding You need to shut down the R2420 manually or wake up the computer to synchronize Standby or Sleep mode together R2420 is utilizing the 5V adapter please DO NOT use the 12V adapter to avoid the machine and data failure Thank you for choosing product from RAIDON Technology Inc This information in the manual has been thoroughly checked before publication but may not conform to the product actually delivered which mean actual product specifications depend on the product shipped to you Any update in the specifications or product related information shall not be subject to further notice but for the latest information on the product please visit the website as www RAIDON com tw or contact us at supporting raidon com tw and we will get back to you as soon as possible Copyright RAIDON TECHNOLOGY INC All rights reserved2. RAIDON R2420 B3 Quick Installation Guide Product Diagrams and Contents of Product Package Front View HDD 1 Access HDD 2 Access Rear View RAIDON Power CAUTION Please ensure each plug is properly 1 n power Ly l RAID Mode PowerLED USB3 0 Port 5VDCIN Power Switch After you open the outer package make sure that the following items are contained in the package Contents of Product Package es jill IASA E USB 3 0 Cable x1 on 4pm MCE Power Cable x1 Quick Guide x1 R2420 B3 Device x1 Power Adaptor x1 Please make sure that the related accessories and product body are not damaged or missing If you have any question please contact the local distributor or the retailer you purchase from for help v1 1 January 2013 2 Install SSD HDD into R2420 B3 slot and make sure the SSD HDD is properly fix to the right position and cover the front panel 3 Configure the RAID level via the RAID mode switch from the back panel RAID 0 1 amp JBOD 4 Connect the related cable to the correct plugs CAUTION Please ensure each plug is properly connected before turing on power 5 Hardware installation is now complete Please power on the unit and follow the OS indications to format the hardware After the configuration is completed you may access the data X For the future hard drive change you can open the front panel to 90 degrees perpendicular to the surface cover gently pushed in
3. to the body and when pushed in the end will be triggered the SSD HDD to eject the device that SSD HDD immediately withdraw Always assure the front panel has pull out entirely before close it X Push the front cover to the end and the hard drive will be ejected LED Instruction LED LED Indicators Power LED Power On Blue Light On No HDD Red Light On HDD Idle HDD Failed Red Light On Data Access Blue Blink og Boj Rebuilding Source Purple Light On X Blue Purple Blink Alternatively G amp HDD LED Rebuilding Target Hardware Installation Please refer to the following procedures for the hardware installation of R2420 1 Installing the SSD HDD into the product by push further inside from the arrow point the front panel will automatically bounce to further open to 90 degrees a Push the arrow point place b Move the front case until 90 degrees Important Notice Coming with a concept of reducing energy consumption R2420 and O S are synchronized for green and cost saving Please always connect the USB cable to the computer to ensure the energy saving function operating normally R2420 supports RAID 1 Mirroring RAID O Striping and JBOD Please configure the RAID level before powering on If you reset the RAID mode later on it would destroy the data in the disks Please backup the data before configuring the RAID mode Once the computer turns to Standby or Sleep mode R24
Download Pdf Manuals
Related Search