SYBA SD-PEX60005
Contents
1. problem please contact your dealer for assistance HARDWARE INSTALLATION Before the installation of the converter let us make the following assumptions The end users must have the basic knowledge of installing an internal device and its driver to a PC If they are not sure about their abilities or have any queries please call their local dealers immediately or find somebody who are experienced _ and qualified for assistance One PCI Express slot and one USB 2 0 port are available on the computer An operating system supported by your ExpressCard adapter has been installed on the computer Installing the Converter into the Computer 1 Turn off your computer and all external devices connected to it 2 Disconnect your computer from the power sources 3 Open the computer case Refer to your computer user manual for more details 4 Find an available PCI Express Gen 2 slot PCI Express Gen 1 slot will do but decrease your ExpressCard Gen 2 adapter performance from 5Gbps to 2 5Gbps Remove the slot bracket Save the bracket screw for later use 5 Align the converter card horizontally with respect to the slot and insert it into the slot firmly and evenly Take care not to force it into the slot Once you have properly positioned the converter into the slot fasten it to the computer case with the screw you have just saved 6 In order to support ExpressCard adapter which requires USB 2 0 signal from the computer con2. SE MANL E2EXCD2 EN 1 User s Manual INTRODUCTION The PCI Express 2 0 to ExpressCard 34 Converter provides the best solution for using ExpressCard 34 Gen 1 2 5Gbps or Gen 2 5Gbps adapter on any desktop computer with PCI Express slot si sinaeripiesd AND SPECIFICATION Compliant with PCI Express Base Specification Revision 2 0 Single Lane x1 PCI Express 2 0 Gen 2 interface with maximum 5 0 Gbps throughput Supports standard height and low profile desktop cases e One ExpressCard 34 adapter slot compliant with ExpressCard 34mm type Il standard e Compatible with ExpressCard 34 Gen 1 2 5Gbps and Gen 2 SGbps adapter Supports ExpressCard 34 adapter that requires 3 3V and 1 5V power Transparent to operating system No need driver installation Driver installation for your ExpressCard adapter is still required This product does not support ExpressCard hot plug PACKAGE CONTENTS Please check whether the package contains the following items If any item is missing or damaged contact the retailer as soon as possible a EG PCI Express 2 0 to ExpressCard 34 Converter x1 e User s Manual x1 e USB 2 0 cable x1 optional e Extra mounting bracket x1 optional WARNING Before installing and activating the converter card please make sure you have a complete backup of your existing data from hard drives Manufacturer is not responsible for data loss due to abuse misuse or neglect Should you have any installation
3. nect the USB pin header on the converter card to the motherboard USB port using the USB 2 0 cable optional See Figure 1 for USB pin header orientation WARNING Reversed orientation of the USB pin header ins result i in permanent damage to your ExpressCard adapter 7 Secure the computer case 8 Insert your ExpressCard adapter to the converter card 9 Connect the unplugged power cable back to the computer 10 Turn on the computer aP 5V V GND D D USB CABLE gt Figure 1 USB pin header location SOFTWARE INSTALLATION The converter is transparent to operating system and so the converter itself does not require any device driver Refer to the user s manual of your ExpressCard adapter for driver installation ATTENTION The converter does not support ExpressCard hot plug Always turn off the computer before you plug in or remove the ExpressCard adapter Otherwise the operating system or even the motherboard BIOS contents may crash All contents and specification mentioned in this manual are subject to change without prior notice All brand names and trade names referenced and mentioned in this manual are property of their respective owners
Download Pdf Manuals
Related Search