Home

Epson PowerLite Home Cinema 2000

1. 1 FreeBSD Copyright c 1980 1986 1993 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 176 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the University of California Berkeley and its contributors 4 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DA
2. e Use the security slot on the projector to attach a Kensington Microsaver Security system available from Epson Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture Parent topic Projector Security Features Related references Optional Equipment and Replacement Parts 73 Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings Using the Projector s Menus Image Quality Settings Image Menu Input Signal Settings Signal Menu Projector Feature Settings Settings Menu Projector Setup Settings Extended Menu Projector Network Settings Network Menu Projector Information Display Info Menu Projector Reset Options Reset Menu Using the Projector s Menus You can use the projector s menus to adjust the settings that control how your projector works The projector displays the menus on the screen 1 Press the Menu button on the control panel or remote control Esc Source PEJ 74 oa fk w HDMI Link Volume M E ser Default OEY O You see the menu screen displaying the Image menu settings Brightness Contrast Color Saturation Tint Sharpness Color Temp Advanced Power Consumption Normal Auto Iris Off Reset Press the up or down arrow buttons to move through the menus listed on the l
3. License terms of conditions of each program which are provided by owner of the copyright to the libpng are as follows This copy of the libpng notices is provided for your convenience In case of any discrepancy between this copy and the notices in the file png h that is included in the libpng distribution the latter shall prevail COPYRIGHT NOTICE DISCLAIMER and LICENSE If you modify libpng you may insert additional notices immediately following this sentence This code is released under the libpng license libpng version 1 2 6 August 15 2004 through 1 2 49 March 29 2012 are Copyright c 2004 2006 2009 Glenn Randers Pehrson and are distributed according to the same disclaimer and license as libpng 1 2 5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1 0 7 July 1 2000 through 1 2 5 October 3 2002 are Copyright c 2000 2002 Glenn Randers Pehrson and are distributed according to the same disclaimer and license as libpng 1 0 6 with the following individuals added to the list of Contributing Authors Simon Pierre Cadieux Eric S Raymond Gilles Vollant and with the following additions to the disclaimer There is no warranty against interference with your enjoyment of the library or against infringement There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs This library is provided with all faults and the entire
4. Setting Options Description Tint Varying levels available Adjusts the balance of green to magenta tones in the image Varying levels available Adjusts the sharpness or softness of image details Color Temp color temperature Varying levels available Sets the overall color tone Higher values tint the image blue and lower values tint the image red Advanced RGB RGB Adjusts the offset and gain RGBCMY for each color Epson Super White RGBCMY Adjusts the hue saturation and brightness for each color Epson Super White Reduces over exposure of whites in your image Can only be set when Color Mode is set to Natural Cinema or 3D Cinema Power Consumption Normal Adjusts the brightness level ECO power usage and fan noise Adjusts the projected luminance based on the image brightness when certain Color Modes are selected Note The Brightness setting does not affect lamp brightness To change the lamp brightness mode use the Power Consumption setting Parent topic Adjusting the Menu Settings Related concepts Color Mode 77 Input Signal Settings Signal Menu Normally the projector detects and optimizes the input signal settings automatically If you need to customize the settings you can use the Signal menu The available settings depend on the currently selected input source 3D Setup Aspect Auto Noise Reduction Off Overscan Auto HDMI Video Range Normal Image Processing Fine Reset T
5. 121 Width Depth Weight 11 69 inches 297 mm 9 72 inches 247 mm 6 2 Ib 2 8 kg Parent topic Technical Specifications Projector Electrical Specifications Rated frequency Power supply Power consumption 100 to 120 V Power consumption 220 to 240 V 50 60 Hz 100 to 240 VAC 10 2 9 to 1 3A Operating Normal Power Consumption mode 300 W ECO Power Consumption mode 224 W Standby 0 28 W Operating Normal Power Consumption mode 287 W ECO Power Consumption mode 217 W Standby 0 31 W Parent topic Technical Specifications Projector Environmental Specifications Temperature Humidity relative non condensing Operating 41 to 95 F 5 to 35 C Storage 14 to 140 F 10 to 60 C Operating 20 to 80 Storage 10 to 90 122 Operating altitude Up to 4921 feet 1500 m Up to 9843 feet 3000 m with High Altitude Mode enabled Parent topic Technical Specifications Projector Safety and Approvals Specifications United States FCC Part 15 Class B DoC UL60950 1 2nd edition cTUVus Mark Canada ICES 003 Class B CSA C22 2 No 60950 1 07 cTUVus Mark Parent topic Technical Specifications Supported Video Display Formats For best results your computer s monitor port or video card resolution should be set to display in the projector s native resolution However your projector includes Epson s SizeWise chip that supports other computer display resolutions so your image will be
6. C 2001 Hans Peter Nilsson Permission to use copy modify and distribute this software is freely granted provided that the above copyright notice this notice and the following disclaimer are preserved with no changes THIS SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 162 11 Christopher G Demetriou Copyright c 2001 Christopher G Demetriou All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL
7. Displaying From a PO Laptop Cessnta ade t eta oetecodte tls Ga tidal e a eae Nate aars E 110 Displaying From a Mac Laptop iiscectactiipaetacsedes tnd sealed et ean ada 110 Solutions When Not Supported Message Appears cccceceeeeceeeesenneeeeeeeeeeeeeeaeeeeeeenaeeeeenneeees 111 Solutions When Only a Partial Image Appears ccecceeeeeeeeeeeceeeeeeeeeaaeeeeeeeeeeeseaeeeesnseeeeeenaeeees 111 Solutions When the Image is Not Rectangular cccceceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseaeeeeeeeeeeessaeeees 111 Solutions When the Image Contains Noise or Static 2 0 0 ccccceeeeeeeeeeeeeceeeeeeeeeeeeeeneeeeeeseaeeeeeeeeees 112 Solutions When the Image is Fuzzy or Blurry ccececeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeeeeeeseaaeeeeeeneeeeeeeaeeees 113 Solutions When the Image Brightness or Colors are Incorrect 0 cccceeeeeeeeeeeeeeeeeeeeeeteeeeeteeees 113 Solutions When a 3D Image Does Not Display Correctly ceccecceeeeeeeeeeeeeeeeeeeeeeeeeseaeeeeeneeees 114 Solutions to So nd PRODI GMS Aineet eSa stv ae a noe A E aK aeaaeai 115 Solving Projector or Remote Control Operation Problems c ccceecsceeeeeeeeeeeeeaeeeeeeeeeeeeeeeeeeeees 116 Solutions to Projector Power or Shut Off Problem cccccceeeeeeeeenceeeeeeeeeeeeeeeeeeenenaeeeneneeees 116 Solutions to Problems with the Remote Control ccccccscceeeseeeeeeeeeeeeeeeseeeeeeaaeeeeesaeeeeeneeeeeees 117 Where to Get Help sisi cccge nec udec
8. EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 3 David M Gay AT amp T 1991 Lucent 1998 The author of this software is David M Gay Copyright 1991 by AT amp T 160 Permission to use copy modify and distribute this software for any purpose without fee is hereby granted provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software THIS SOFTWARE IS BEING PROVIDED AS IS WITHOUT ANY EXPRESS OR IMPLIED WARRANTY IN PARTICULAR NEITHER THE AUTHOR NOR AT amp T MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE The author of this software is David M Gay Copyright c 1998 2001 by Lucent Technologies All Rights Reserved Permission to use copy modify and distribute this software and its documentation for any purpose and without fee is hereby granted provided that the above copyright notice appear in all copies and that both that the copyright notice an
9. Viewing 3D images requires a 3D compatible video device and a pair of Epson RF 3D glasses not included with your projector You can purchase Epson RF 3D glasses from an Epson authorized reseller To find the nearest reseller call 800 GO EPSON 800 463 7766 Or you can purchase online at epsonstore com U S sales or epson ca Canadian sales 1 Connect a 3D compatible video device to the projector using a compatible HDMI cable 2 Turnon the video device then turn on the projector 3 Begin playback from the video device Note Make sure you set the video device to play content in 3D mode 4 Press the 2D 3D button on the remote control to activate 3D mode if necessary 2D 3D Color Mode Fast Fine at RGBCMY Auto Iris Slideshow Pattern Aspect ANN Mute 5 Slide the power switch on the 3D glasses to the On position 49 6 Put on the 3D glasses If you do not see a 3D image pair the glasses with the projector Note If you change the video source or you are not within range of your projector the glasses enter standby mode and the indicator light flashes green Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing Pairing the 3D Glasses with the Projector Charging the 3D Glasses 3D Viewing Range Parent topic Using Basic Projector Features Related tasks Connecting to an HDMI Video Source Connecting to a Computer for HDMI Video and Audio Pairing the 3
10. leave at least 2 feet 60 cm of space between the projectors to allow for proper ventilation You may need to clean the air filter and vent A clogged air filter or vent can block ventilation needed to cool the projector Do not use canned air or the gases may leave a residue Do not store the projector outdoors for an extended length of time Except as specifically explained in this manual do not attempt to service this product yourself Refer all servicing to qualified personnel Opening or removing covers may expose you to dangerous voltages and other hazards Never open any covers on the projector except as specifically explained in this manual Never attempt to disassemble or modify the projector Refer all repairs to qualified service personnel Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions if it does not operate normally when you follow the operating instructions or exhibits a distinct change in performance if smoke strange odors or strange noises come from the projector if the power cord or plug is damaged or frayed if liquid or foreign objects get inside the projector or if it has been exposed to rain or water if it has been dropped or the housing has been damaged Do not touch the plug during an electrical storm Otherwise you may receive an electric shock Unplug the projector when it will not be used for extended periods Do not use the projec
11. you can contact Epson for technical support Parent topic Solving Problems Related references Where to Get Help Projector Light Status Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs Check the status and color of the lights and look for a solution in the table here 105 Source Oe C x i Lamp Temp Power light Status light Lamp light A OUO N Temp temperature light Power light Status light Lamp light Temp light Status and solution Be pe 0 _fon Normal operation Blue Flashing blue Warming up Wait for an image to appear Ble oaa Standby or sleep mode Blue an blue Shutting down When the Status light stops esti you can unplug the projector 106 Power light Status light Lamp light Temp light Status and solution Blue Varies Off Flashing Projector is too hot orange Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects Clean or replace the air filter Make sure the environmental temperature is not too hot Off Flashing blue Off Orange Projector has overheated and turned off Leave it turned off to cool down After about five minutes do the following Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects Clean or replace the air filter If operating the projector at high altitude turn on High Al
12. 1920 x 1080 Side by Side Top and Bottom Parent topic Technical Specifications 125 Notices Check these sections for important notices about your projector Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products Please go to epson com recycle for information on how to return your products for proper disposal Parent topic Notices Important Safety Information Caution Never look into the projector lens when the lamp is turned on the bright light can damage your eyes Never let children look into the lens when it is on Never open any cover on the projector except the lamp and filter covers Dangerous electrical voltages inside the projector can severely injure you Except as specifically explained in this User s Guide do not attempt to service this product yourself Refer all servicing to qualified service personnel Warning The projector and its accessories come packaged in plastic bags Keep plastic bags away from small children to avoid any risk of suffocation Caution When you replace the lamp never touch the new lamp with your bare hands the invisible residue left by the oil on your hands may shorten the lamp life Use a cloth or glove to handle the new lamp Parent topic Notices 126 Important Safety Instructions Follow these safety ins
13. 7 feet 6 m 2 30 Note Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight or the projector may not respond to commands If you will not use the remote control for a long time remove the batteries Parent topic Using Basic Projector Features Related tasks Installing Batteries in the Remote Control Selecting an Image Source If you connected multiple image sources to the projector such as a computer and DVD player you may want to switch from one image source to the other 1 Make sure the connected image source you want to use is turned on 59 2 For video image sources insert a DVD or other video media and press its play button if necessary 3 Doone of the following e Press the Source button on the projector until you see the image from the source you want gece e Press the button for the source you want on the remote control If there is more than one port for that source press the button again to cycle through the sources LAN HDMI1 HDMI2 Video HDMI port sources Network source Video sources PC port VGA sources 2 3 4 Parent topic Using Basic Projector Features Projection Modes Depending on how you positioned the projector you may need to change the projection mode so your images project correctly e Front default setting lets you project from a table in front of the screen 60 e Front Ceiling flips the image over top t
14. ARE a raaa 18 Projector Parts Remote COmnirl scien sae eases ureccececettadet dace tend tides ueteoentegelhed ees Gisela ae aetdeneeteed ees 19 Setting Up the Projector a se sees ee ett tee et 21 Projector Placement asinn e a E aa testes e E E cadet endear cetrulencs 21 Projector Setup and Installation Options esssessseenenseesrneeeerrerenrersrnrssstrrnsttrnnettnnnnrnnnnnsnnenesernenene 21 Projection Distance neonin aie a aneian Aaea AE AKE aap EASA Siera AKADE AREENAN atta 23 Projector CONNECTIONS i egsca acces ste raea a a a et Gate te raa ERE e a veces AR Sia 25 Connecting to Video SoUrCESesrec nan a a a a a a ea aeaa P Seg Raters 26 Connecting to an HDMI Video Source o0 eee eeecceeeeeeeeeeeeeeeeeeeeaaeeeeeaaeeeeeeaaaeesesneeeeeeeaaeennenaes 26 Connecting to an MHL Compatible Device 00 0 2 eeeeeceeeeecceeeeeeeeeeeeeeeeeeeeaaeeeeegeeeeeesaaaeenseaees 27 Connecting to a Component to VGA Video Source cceeeceeeeeeceeeeeeeeeeeeeteaeeeeeeeeeeeeeeaeeeenaes 28 Connecting to a Composite Video Source eeeeeeeeeceeeeeeeeeceeeeeeaeeeeeeneceeeeeaaaeeseseeeeeeseaaeeeenaes 29 Connecting to a Video Source for Sound si 3s cicctacs ced ecge capshateccerdhccnsadeasTeatbecsoceavescedendectnpeenveces 29 Connecting to Computer SOUICOS re 6 ceceesecversiceejceqnsecencepecadenendentey ecduceedevesenneqageceenepageiesetecepageesees 30 Connecting to a Computer for VGA WIS iss 2 so20 ie Bat eaelnoe Sebectid nase Sac ancseeee rela aGn
15. DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 12 SuperH Inc Copyright 2002 SuperH Inc All rights reserved This software is the property of SuperH Inc SuperH which specifically grants the user the right to modify use and distribute this software provided this notice is not removed or altered All other rights are reserved by SuperH SUPERH MAKES NO WARRANTY OF ANY KIND EXPRESS OR IMPLIED WITH REGARD TO THIS SOFTWARE IN NO EVENT SHALL SUPERH BE LIABLE FOR INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING PERFORMANCE OR USE OF THIS SOFTWARE So that all may benefit from your experience please report any problems or suggestions about this software to the SuperH Support Center via e mail at softwaresupport superh com SuperH Inc 405 River Oaks Parkway 163 San Jose CA 95134 USA 13 Royal Institute of Technology Copyright c 1999 Kungliga Tekniska H kolan Royal Institute of Technology Stockholm Sweden All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the
16. IP address on the network standby screen Selecting Wireless Network Settings in Windows Before connecting to the projector select the correct wireless network on your computer 1 To access your wireless utility software double click the network icon on the Windows taskbar 2 Doone of the following e If your projector is set up on an existing network Advanced mode select the network name SSID If your projector is configured for Quick mode select the projector s SSID 3 Click Connect Parent topic Wireless Network Projection Selecting Wireless Network Settings in Mac OS X Before connecting to the projector select the correct wireless network in Mac OS X 1 Click the AirPort icon on the menu bar at the top of the screen 2 Make sure AirPort is turned on then do one of the following e If your projector is set up on an existing network Advanced mode select the network name SSID If your projector is configured for Quick mode select the projector s SSID Parent topic Wireless Network Projection Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network Set up one of the following security options to match the settings used on your network e WPA WPA2 PSK security Advanced connection mode e WPA2 PSK security Quick connection mode Note Check with your network administrator for guidance on entering the correct information 1 Press the Menu butt
17. Parent topic Projector Maintenance Related references Remote Control Specifications Transporting the Projector The projector contains precision parts some of which are glass Follow these guidelines to transport or ship the projector safely Close the lens cover to protect the lens e Remove any equipment connected to the projector When transporting the projector a long distance or as checked luggage pack it in a firm box with cushioning around it and mark the box Fragile e When shipping the projector for repairs place it in its original packing materials if possible or use equivalent materials with cushioning around the projector Mark the box Fragile Note Epson shall not be liable for any damages incurred during transportation Parent topic Maintaining and Transporting the Projector 104 Solving Problems Check the solutions in these sections if you have any problems using the projector Projection Problem Tips Projector Light Status Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Where to Get Help Projection Problem Tips If the projector is not working properly try turning it off and unplugging it Then plug it back in and turn it on If this does not solve the problem check the following e The lights on the projector may indicate what the problem is The solutions in this manual can help you solve many problems If none of these solutions help
18. Problems Check the solutions in these sections if you have any problems with projected images or sound Solutions When No Image Appears Solutions When No Signal Message Appears Solutions When Not Supported Message Appears Solutions When Only a Partial Image Appears 108 Solutions When the Image is Not Rectangular Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions When a 3D Image Does Not Display Correctly Solutions to Sound Problems Parent topic Solving Problems Solutions When No Image Appears If no image appears try the following solutions Make sure the lens cover is open all the way or off Press the A V Mute button on the remote control to see if the image was temporarily turned off Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources Press the projector s power button to wake it from standby or sleep mode Also see if your connected computer is in sleep mode or displaying a blank screen saver Check the settings on the Signal menu to make sure they are correct for the current video source Adjust the Brightness setting or select the Normal Power Consumption setting Check the Display setting to make sure Messages is set to On If the projector does not respond when you press the control panel buttons the buttons may be locked Unlock the
19. Turn off the projector and unplug the power cord 95 2 Carefully open the air filter cover Note Air filters contain ABS resin and polyurethane foam Dispose of used air filters according to local regulations 96 4 Place the new air filter in the projector as shown and push gently until it clicks into place 5 Close the air filter cover Parent topic Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector s menu system Replace the lamp as soon as possible when the following occurs The projected image gets darker or starts to deteriorate A message appears when you turn on the projector telling you to replace the lamp e The projector s lamp light is flashing orange e The projector s lamp light is flashing orange and its power light is flashing blue Replacing the Lamp Resetting the Lamp Timer Parent topic Projector Maintenance Related references Optional Equipment and Replacement Parts Projector Information Display Info Menu Projector Lamp Specifications 97 Replacing the Lamp Before you replace the lamp let the projector cool down for at least one hour so the lamp will not be hot Warning Let the lamp fully cool before replacing it to avoid injury You can replace the lamp while the projector is mounted to the ceiling if necessary 1 Turn off the projector and unplug the powe
20. Using the Projectors Men Scianni anona a e E aA a e at 74 Image Quality Settings Image MENU vss ctccesscechagesedreaseccadenedactedendelane neGeedea vadele caesedshgesvanecateececendeasess 76 Input Signal Settings Signal MON iz scr cespecees beeaeo oles ees fee tee ee as ae amese heard edenalelee 78 Projector Feature Settings Settings M Nu eccccceeeeseceeeesceceeeeeeeeeeeeeeceeeeeaaeeeeseeeeeeessaaeeseeneeeeeees 81 Projector Setup Settings Extended Menu cccccceessceeeeeeeeeeeeeeeeeeeeeaeeeseeeeaeeeeeaaeseeeneeeeeenaaeeeene 84 Projector Network Settings Network MeNnu c cccesscceeeeseeceeeeeeceeeeeaaeeeeeneaeeeeeaaeeseesneeeeenaaeeenee 86 Projector Information Display Info Menu cceeeceeeeeesseceeeeseeeeeeeeeeeeeeeaaeeeeeaaaeeseseeaeeeeesaaeeeneeeeeeeens 88 Event HSC GOOG EIST rers a Seen eaa a aa Ea EE e E under veges EEEE Eia 89 Projector Reset Options Reset Menu isc cccccetciectctacesQeeteascactatseietadeassaeceteschareesdatbeasPsereedeeeaaes 90 Maintaining and Transporting the Projector susssssesnnunnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nna 92 ProjeCtor MaIMGNANCG nean aaner a E aoa da EEE A R N a niai 92 CIS AIG TSE CIS r r r R r r O ERE 92 Cleaning the SD GlaSSOS iiep a E E eae vee E E tee ma enniea neat esha 93 Cleaning the Projector Case es secccectiitsecaectgessh thaccensdanceedahsrsteavaecnegiioueddusnteetandtdeerytlanbeseletseceutioe
21. and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution user s manual etc b The TOPPERS Project shall be notified owing to a method in which the form of distribution is decided otherwise 4 The above copyright holder and the TOPPERS Project shall be exempt from responsibility for whatever damages occur either directly or indirectly through the utilization of this software This software is something that is provided with no guarantee The above copyright holder and the TOPPERS Project make no guarantee whatsoever in regard to this software including the possibility of its application In addition the above copyright holder and the TOPPERS Project shall also not bear responsibility for whatever damages occur either directly or indirectly through the utilization of this software Note The TOPPERS License has been revised several times what is shown above is the latest version that is to be applied to software made public hereafter TINET This projector product includes the open source software program TINET which applies the terms and conditions provided by owner of the copyright to the TINET The TINET are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of TINET programs tinet 1 4 4 License terms of conditions of each program which are provided by owner of the copyright to the TINET are as follows
22. buttons If the projector does not respond when you press buttons on the remote control make sure the remote receivers are turned on For images projected with Windows Media Center reduce the screen size from full screen mode For images projected from applications using Windows DirectX turn off DirectX functions Parent topic Solving Image or Sound Problems Related references Image Quality Settings Image Menu Projector Setup Settings Extended Menu 109 Solutions When No Signal Message Appears If the No Signal message appears try the following solutions e Press the Source button on the projector repeatedly to cycle through the available sources Wait a few seconds for an image to appear Turn on the connected computer or video source and press its play button to begin your presentation if necessary e Check the connection from the projector to your video sources e If you are projecting from a laptop computer make sure it is set up to display on an external monitor e If necessary turn the projector and the connected computer or video source off and then on again Ifthe other solutions do not solve the problem reset all of the settings using the Reset menu Displaying From a PC Laptop Displaying From a Mac Laptop Parent topic Solving Image or Sound Problems Related concepts Projector Connections Displaying From a PC Laptop If you see the No Signal message when you display from a PC laptop you n
23. loup Gailly and Mark Adler it does not include third party code If you redistribute modified sources we would appreciate that you include in the file ChangeLog history information documenting your changes mDNSResponder This projector product includes the open source software program mDNSResponder which applies the following license terms Apache License Version 2 0 January 2004 List of mDNSResponder mDNSResponder 107 6 only mDNSResponderPosix is used License terms Apache License Version 2 0 January 2004 are as follows Apache License Version 2 0 January 2004 http www apache org licenses TERMS AND CONDITIONS FOR USE REPRODUCTION AND DISTRIBUTION 1 Definitions License shall mean the terms and conditions for use reproduction and distribution as defined by Sections 1 through 9 of this document Licensor shall mean the copyright owner or entity authorized by the copyright owner that is granting the License Legal Entity shall mean the union of the acting entity and all other entities that control are controlled by or are under common control with that entity For the purposes of this definition control means I the power direct or indirect to cause the direction or management of such entity whether by contract or otherwise or ii ownership of fifty percent 50 or more of the outstanding shares or iii beneficial ownership of such entity You or Your shall mean an individual or Legal
24. not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given
25. only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution s alone or by combination of their Contribution s with the Work to which such Contribution s was submitted If You institute patent litigation against any entity including a cross claim or counterclaim in a lawsuit alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed 156 4 Redistribution You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium with or without modifications and in Source or Object form provided that You meet the following conditions a You must give any other recipients of the Work or Derivative Works a copy of this License and b You must cause any modified files to carry prominent notices stating that You changed the files and c You must retain in the Source form of any Derivative Works that You distribute all copyright patent trademark and attribution notices from the Source form of the Work excluding those notices that do not pertain to any part of the Derivative Works and d If the Work includes a NOTICE text file as part of its distribution then any Derivative Works that You distribute must include a readable copy of the attribution notices contained wit
26. other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software 134 Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free soft
27. permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 31 M Warner Losh targets using libc posix Copyright c 1998 M Warner Losh lt imp freebsd org gt All rights reserved 170 Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of condit
28. provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 164 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 15 Andrey A Chernov Copyright C 1997 by Andrey A Chernov Moscow Russia All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions
29. save your settings and exit the menus After you complete the wireless settings for your projector you need to select the wireless network on your computer Wireless LAN Menu Settings Parent topic Wireless Network Projection Related references Projector Network Settings Network Menu Wireless LAN Menu Settings Setting Options Description Wireless LAN Power Turns on wireless LAN support 41 Setting Options Description _ Connection Mode Quick Advanced Up to 32 alphanumeric characters no spaces DHCP On or Off IP Address Subnet Mask Gateway Address _ eo IP Address Display Parent topic Selecting Wireless Network Settings Manually 42 Selects the type of wireless connection Quick lets you quickly connect to one computer smartphone or tablet Advanced lets you connect a wireless network access point In Quick connection mode selects the frequency band channel used by the wireless LAN Sets the SSID network name of the wireless LAN system the projector is connecting to Displays the access point status indicates currently connected access points indicates access points where security is set Selects DHCP if your network assigns addresses automatically or turns off DHCP so you can enter the network s IP address subnet mask and gateway address as needed Selects whether to display the SSID on the network standby screen Selects whether to display the
30. shape Son M m After correction your image is slightly smaller Note If the projector is installed out of reach you can also correct the image shape with the remote control using the Keystone settings in the projector menus Parent topic Image Shape Related references Projector Feature Settings Settings Menu 56 Resizing the Image With the Zoom Ring 1 Turn on the projector and display an image Note You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control 2 Toenlarge or reduce the image size rotate the projector s zoom ring B od ts A ps Parent topic Using Basic Projector Features Focusing the Image Using the Focus Ring 1 Turn on the projector and display an image Note You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control 57 2 To sharpen the image focus rotate the projector s focus ring E Parent topic Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room You can point it at the screen or the front or back of the projector Make sure that you aim the remote control at the projector s receivers within the distance and angles listed here 58 19 7 feet 6 m 2 15 1 19
31. source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and 136 so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you
32. the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 20 DJ Delorie i386 Copyright C 1991 DJ Delorie All rights reserved 167 Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms This file is distribu
33. the lamp replacement message and to keep track of lamp usage correctly Note Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information 1 Turn on the projector 2 Press the Menu button 3 Select the Reset menu and press Enter Reset All Reset Lamp Hours 4 Select Reset Lamp Hours and press Enter You see a prompt asking if you want to reset the lamp hours 5 Select Yes and press Enter 6 Press Menu or Esc to exit the menus Parent topic Projector Lamp Maintenance 102 Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries Replace the batteries as soon as they run out Caution Use only the type of batteries specified in this manual Do not install batteries of different types or mix new and old batteries 1 Open the battery cover as shown 2 Remove the old batteries Warning If the battery fluid has leaked wipe it away with a soft cloth and avoid getting the fluid on your hands If it gets on your hands wash them immediately to avoid injury 3 Insert the batteries with the and ends facing as shown 103 4 Close the battery cover and press it down until it clicks into place Warning Dispose of used batteries according to local regulations Do not expose batteries to heat or flame Keep batteries out of the reach of children they are choking hazards and are very dangerous if swallowed
34. the plug firmly into the outlet Do not pull the power cord when disconnecting the plug always be sure to hold the plug when disconnecting it Do not overload wall outlets extension cords or power strips Failure to comply with these precautions could result in fire or electric shock Do not place the projector where the cord can be walked on This may result in fraying or damage to the plug Unplug the projector from the wall outlet before cleaning Use a dry cloth or for stubborn dirt or stains a moist cloth that has been wrung dry for cleaning Do not use liquid or aerosol cleaners any sprays containing flammable gas or solvents such as alcohol paint thinner or benzine Do not block the slots and openings in the projector case They provide ventilation and prevent the projector from overheating Do not operate the projector on a sofa rug or other soft surface or set it on top of loose papers Do not cover the projector with a blanket curtain or tablecloth If you are setting up the projector near a wall leave at least 7 9 inches 20 cm of space between the wall and the air exhaust vent Do not operate the projector in a closed in cabinet unless proper ventilation is provided 127 Never allow objects of any kind to enter any openings in the projector Do not leave objects especially flammable objects near the projector Never spill liquid of any kind into the projector If you are using two or more projectors side by side
35. work stoppage computer failure or malfunction or any and all other commercial damages or losses even if such Contributor has been advised of the possibility of such damages 9 Accepting Warranty or Additional Liability While redistributing the Work or Derivative Works thereof You may choose to offer and charge a fee for acceptance of support warranty indemnity or other liability obligations and or rights consistent with this License However in accepting such obligations You may act only on Your own behalf and on Your sole responsibility not on behalf of any other Contributor and only if You agree to indemnify defend and hold each Contributor harmless for any liability incurred by or claims asserted against such Contributor by reason of your accepting any such warranty or additional liability END OF TERMS AND CONDITIONS APPENDIX How to apply the Apache License to your work To apply the Apache License to your work attach the following boilerplate notice with the fields enclosed by brackets replaced with your own identifying information Don t include the brackets The text should be enclosed in the appropriate comment syntax for the file format We also recommend that a file or class name and description of purpose be included on the same printed page as the copyright notice for easier identification within third party archives Copyright yyyy name of copyright owner Licensed under the Apache License Version 2
36. work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on
37. 0 the License you may not use this file except in compliance with the License You may obtain a copy of the License at http Awww apache org licenses LICENSE 2 0 Unless required by applicable law or agreed to in writing software distributed under the License is distributed on an AS IS BASIS WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND either express or implied See the License for the specific language governing permissions and limitations under the License aes src 29 04 09 This projector product includes the open source software program aes src 29 04 09 which applies the terms and conditions provided by owner of the copyright to the aes src 29 04 09 158 The aes src 29 04 09 are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of es src 29 04 09 programs aes src 29 04 09 License terms of conditions of each program which are provided by owner of the copyright to the aes src 29 04 09 are as follows Copyright c 1998 2008 Brian Gladman Worcester UK All rights reserved LICENSE TERMS The redistribution and use of this software with or without changes is allowed without the payment of fees or royalties provided that 1 source code distributions include the above copyright notice this list of conditions and the following disclaimer 2 binary distributions include the above copyright notice this list of conditions and the following di
38. 2 Self powered by their own AC power supplies bus powered hard drives are not recommended Avoid using hard drives with multiple partitions You can project slide shows from image files on a connected USB device or memory card reader Parent topic Connecting to External USB Devices Related topics Projecting a Slide Show Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector s USB Type A port and use it to project images and other content 1 If your USB device came with a power adapter plug the device into an electrical outlet 2 Connect the USB cable or USB flash drive or USB memory card reader into the projector s USB Type A port shown here Note Do not connect a USB hub or a USB cable longer than 10 feet 3 m or the device may not operate correctly 3 Connect the other end of the cable if applicable to your device Parent topic Connecting to External USB Devices Related topics Projecting a Slide Show Selecting the Connected USB Source You can switch the projector s display to the source you connected to the USB Type A port 1 Make sure the connected USB source is turned on if necessary 34 2 Press the Slideshow button on the remote control 3 Press the button again to cycle through other USB sources if available Parent topic Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you fin
39. 39 Wireless LAN Menu Settings seonneeeeenneeeeeneeeoenteorrtrstrrrnnetrnnrrtnenrstenntstttnserttnuernnneenn netten esete eneee 41 Selecting Wireless Network Settings in WiINGOWS cceceeceeeeeeneeeeeeeeeeeeeeeeeeeeeeaeeeeeeeeeeeessteeeeeeees 43 Selecting Wireless Network Settings in Mac OS X eecceeeeeeeeeeeeeeeneeeeeeeeeeeeeeaeeeeeeeaeeeeeeneeeeeseaaeeeeeees 43 Setting Up Wireless Network Security sci taceiinel es cathe seek cendaruatnetedt ca sandiadeaniai team wnt ercumeauciens 43 Wireless Security Menu Settings 54 c0ncieceeh Scpceeeajcegastecacecancatdeesbaacecpacttepaanetiacexsterty dececveensaeiereaeie 44 Using Basic Projector Features ins cicsitetisveusucsaecancuredtunecuwens da sncsicainescneuatave di denueanntusnatesuvsesuanrnwedelaneantadeveues 45 Turnitig On the Projector cusses acechas adehsnct nate wierd R a a a EE E eR 45 Turning Oftthe Projector ereere faudedecresoch cgeiokenseceurecectedelercsas euedeniieddewiuhansdeletasaannsheitealengecays eee 47 Viewing SD MAGES Esna d A EE EEE EA anne GON E A EON OA TEEST Taai 49 Pairing the 3D Glasses with the ProjeCtor cccccceeeesseeeeeeeeceeeeeceaeeeeseeeeeeeesaaeeseeaeeeeseaaaeetsseees 50 Har Ginetne SOs aSSSS 6 uien a eel cae e a r eee aaa Gants sean ae eat 51 3D Viewing Range siiente iaoe date Saati a ANAE aA aap less Eea AAAA NA a ANARTEAN E a CAPES ESS 52 Selecting the Language for the Projector M NuS ccccecsceeeeeceeeeeeeeeeeeeeeeeeeeeesaaeeeee
40. 5 c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Prog
41. 8 sera acric ates e a ate e ls Coa Mat au Ree Manoa aes 127 3D Safety Instructions 2 ice Sete etait ES os aN coe a a oe ie See a ae Ma ete aoa Seda cite 130 FRESTRICTION OL WSC is si cee oe ok ieee ios ce NE ee Nae accel cated ae a i te cele tk Nd a 131 FCC Compliance Statement ciicccecscectiwed scence ecewcetaeienepevnaniedeiewcinnagadoneens send detaluaceipeles teen teoneanereeoned 132 TAG OMAK E E EA EELEE EE EAEE E EEEE RNE EET 132 Opern So rce S ftware License ssi ipene s a arae nd pa ae ad a n aii 133 COD VOI INONCG a r cena r E E rae a a 178 A Note Concerning Responsible Use of Copyrighted Materials cc ccececeeeeeeeeeeeeeeteeeteeeees 179 Copyright Attributo M seese a aae ctf aa Eaa aa ata aa Ee Ea aaa a REET EE a Kia iaai 179 PowerLite Home Cinema 2000 2030 User s Guide Welcome to the PowerLite Home Cinema 2000 2030 User s Guide Introduction to Your Projector Refer to these sections to learn more about your projector and this manual Projector Features Notations Used in the Documentation Where to Go for Additional Information Projector Part Locations Projector Features The PowerLite Home Cinema 2000 and 2030 projectors include these special features Bright high resolution projection system PowerLite Home Cinema 2000 Up to 1800 lumens of color brightness color light output and 1800 lumens of white brightness white light output PowerLite Home Cinema 2030 Up to 2000 lumens of color brightness color l
42. D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing 1 2 3 4 Turn on the projector Set the image source to HDMI Project a 3D image Slide the power switch on the 3D glasses to the On position 50 5 Move the glasses within 10 feet 3 m of the projector then hold down the Pairing button on the glasses for at least three seconds The status light on the glasses flashes green and red If pairing is successful the light turns green for 10 seconds and then turns off Parent topic Viewing 3D Images Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery 1 Connect the smaller end of the charging cable to the port on the bridge of the glasses Note Make sure you connect the cable in the correct orientation or you may damage the glasses or cable 2 Connect the other end of the cable to the USB Type A port on the projector Note The projector must be turned on to charge the glasses 51 The glasses are fully charged when the status light on the glasses stays green Parent topic Viewing 3D Images 3D Viewing Range When you view 3D images make sure you are positioned within the viewing range shown here 1 32ft 10m Parent topic Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector s menus and messages in another language
43. DED BY ARM LTD AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS 172 OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 36 CodeSourcery Inc Copyright c 2009 CodeSourcery Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of CodeSourcery nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY CODESOURCERY
44. E IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 35 ARM Ltd arm and thumb variant targets only Copyright c 2009 ARM Ltd All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name of the company may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVI
45. Entity exercising permissions granted by this License Source form shall mean the preferred form for making modifications including but not limited to software source code documentation source and configuration files 155 Object form shall mean any form resulting from mechanical transformation or translation of a Source form including but not limited to compiled object code generated documentation and conversions to other media types Work shall mean the work of authorship whether in Source or Object form made available under the License as indicated by a copyright notice that is included in or attached to the work an example is provided in the Appendix below Derivative Works shall mean any work whether in Source or Object form that is based on or derived from the Work and for which the editorial revisions annotations elaborations or other modifications represent as a whole an original work of authorship For the purposes of this License Derivative Works shall not include works that remain separable from or merely link or bind by name to the interfaces of the Work and Derivative Works thereof Contribution shall mean any work of authorship including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on be
46. FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE libjpeg This projector product includes the open source software program libjpeg which applies the terms and conditions provided by owner of the copyright to the libjpeg 149 The libjpeg are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of libjpeg programs libjpeg 6b License terms of conditions of each program which are provided by owner of the copyright to the libjpeg are as follows Copyright c 1994 1997 Thomas G Lane This file is part of the Independent JPEG Group s software For conditions of distribution and use see the accompanying README file This distribution contains the sixth public release of the Independent JPEG Group s free JPEG software You are welcome to redistribute this software and to use it for any purpose subject to the conditions under LEGAL ISSUES below LEGAL ISSUES In plain English 1 We don t promise that this software works But if you find any bugs please let us know 2 Yo
47. Get Help Parent topic Introduction to Your Projector Related references Where to Get Help Projector Part Locations Check the projector part illustrations to learn about the parts on your projector Projector Parts Front Top Projector Parts Rear 14 Projector Parts Base Projector Parts Control Panel Projector Parts Remote Control Parent topic Introduction to Your Projector Projector Parts Front Top Control panel Horizontal keystone slider Zoom ring Focus ring Kensington security lock slot Air filter cover Air filter intake Remote receiver Lens Front adjustable foot O ON OA WN O Foot adjust lever 15 12 13 14 15 A V Mute slide lens cover Exhaust vent A V Mute slide lever Lamp cover Parent topic Projector Part Locations Related references Projector Light Status Related tasks Installing a Security Cable Projector Parts Rear A OO N Service Audio Out RS 232C HDMI 1 MHL port HDMI 2 port PC port VGA Video port 16 Audio Out port Service port USB Type A port Audio ports RS 232C port 0 Remote receiver O ON OD OW AC input port Parent topic Projector Part Locations Projector Parts Base 1 Front adjustable foot 2 Rear feet 3 Security cable attachment point 17 4 Mounting bracket holes Parent topic Projector Part Locati
48. HDMI port Contact Apple for compatible adapter options Older Mac computers 2009 and earlier may not support audio through the HDMI port To project with audio from certain ports you may need a commercially available audio cable compatible with your device See your local computer or electronics dealer for purchase information To add additional sound you need speakers an audio video receiver or a video source with speaker connections and the cables necessary to connect to the speakers and the projector See your local computer or electronics dealer for purchase information Parent topic Projector Features Related references Optional Equipment and Replacement Parts 12 Optional Equipment and Replacement Parts You can purchase screens other optional accessories and replacement parts from an Epson authorized reseller To find the nearest reseller call 800 GO EPSON 800 463 7766 Or you can purchase online at epsonstore com U S sales or epson ca Canadian sales Epson offers the following optional accessories and replacement parts for your projector Genuine Epson replacement lamp ELPLP78 Replacement air filter ELPAF32 RF 3D glasses ELPGS03 Projector ceiling mount Remote control In addition to the accessories listed above 1 year and 2 year extended service plans are available Parent topic Projector Features Warranty and Registration Information Your projector comes with a basic warranty that lets you p
49. HIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE i MIT License This projector product includes the open source software program which applies the terms and conditions provided by owner of the copyright to the MIT License The MIT License are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of MIT License programs jquery 1 7 2 min js jquery ui 1 8 20 custom zip jquery ui touch punch js jquery upload 1 0 2 min js License terms of conditions of each program which are provided by owner of the copyright to the MIT License are as follows Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Softwar
50. ILITY EXCEED THE SUM PAID TO INTEL FOR THE PRODUCT LICENSED HEREUNDER 26 Mike Barcroft Copyright c 2001 Mike Barcroft lt mike FreeBSD org gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 168 DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 27 Konstantin Chuguev enable newlib iconv Copyright c 1999 2000
51. INC AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AREDISCLAIMED IN NO EVENT SHALL CODESOURCERY BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 37 MIPS Technologies Inc JE Copyright c 2009 MIPS Technologies Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 173 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of MIPS Technologies Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission T
52. Konstantin Chuguev All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE iconv Charset Conversion Library v2 0 28 Artem Bityuckiy enable newlib iconv Copyright c 2003 Artem B Bityuckiy SoftMine Corporation Rights transferred to Franklin Electronic Publishers Redistribut
53. NCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 138 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is fo
54. OE ge aca ce ode ace 63 Available Color MOdeS ecec 2cneiersgeand a essed setehe oad dor ee heed teat aed 64 Turing ON AUtO WS ieigeos ces dectekvnsveate tee a E E E EEES 65 Controlling the Volume with the Volume ButtonS ssessseensssrnneessnrerennrerennrtsrnresertrnsrtrnneennnnennnnnenne 65 Projecting a Slide SHOW Anniinaa a a N E A aie T 66 Supported Slideshow File Types ccscceeesseceeeeseceeeeeneeeeeeeaeeeeeeaaaeeseaeaeeeeesaaeesesgeeeeeesaaeeeesaes 66 Slideshow Features rynair e sae Rien vat elena oe dee eatin mie ee aie 67 Starting a Slide SNOW aiae a e p aE a A aE E A AAA Ea E E detects 67 Slidesh w Display WOPIIONS arien et e ae ae ear aa aaea a ae raa 69 Adjusting Projector Features ssssssunnneennnnunnnnnnnnnunnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnm nnnnnn nenn nnnnnn nnmnnn nnna 71 Shutting Off the Picture and Sound Temporarily ccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeeneeeeeetiaeeeeneaes 71 Pr ject r Sec rity Feat re Sinira a aE a ee a a A a e A 71 Locking the Projector s Buttons seis cet etans de aateiccnice tage uate lady Mteae bee deden de easel a aaa es 72 Unlocking the Projectors Buttons san seseiicssue Hote eget ood coaches etc lend Deateens ey eee ced ond 73 Installingia Security Cable srice ee a casas Gagvioniaal Ea tease 73 Adjusting the Menu Settings ssnnesnnnennunnrnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nennen nnmnnn nnnm nna 74
55. PowerLite Home Cinema 2000 2030 User s Guide Contents PowerLite Home Cinema 2000 2030 User s Guide ccccssseccceeeeeeeesseeeeeeeseeneeesneeneeeseeeeseeseeeaaeeseneeseeneeaees 9 Introduction to Your Proje ClO saicecedenasncsscacuewarandaansanoueeederauanave be geasas aigusueninaneancuans ieeuesavanassauceeinsvarsuanncbenant 10 Projector FOALUFSS sai cadcccuveacensecedeclsugisaernessberetosed aaa a A A AEDA RENAE aAa AARAA Eaa iaei nei 10 Prod ct Box Conten Senna n a e a e a a aae aTa 11 Additional COM PONGINS cate bers eecrateeevece ts cateee vet estnataadsteccnuncenttnarss teat iaeteo tens ceceadtiatatentarnaeeie 12 Optional Equipment and Replacement Parts nci sss sic eache si deewitoreneeieeasteedeees uses eedioienels 13 Warranty and Registration Information cceececeeeeeeceeeeeeeeeeeeeeeeeeeeeaeeeeeeaaaeeseeeaaeeeeenaaeeeeeeneeeeee 13 Notations Used in the Documentation tices ccatoterdecten ctl nciees ae teoed ated sienna sh detynet ieee adele abate 14 Where to Go for Additional Information si iete scicntc mien te tiedseen dete teeta avec pee andere 14 Leleo old Part LOGAN vent da ia Oe ate eed i ee as BeBe Jana ace 14 Projector Parts Frnt TOD eeece cites erncediie deu ea EE A E eects 15 Projector Paris Rear a cad et arce ten deantcteceute casts A sade ea a cect A SEE 16 Pr je tor PAIS BAS is rrin ioen adeves poa anaiena aia eea aa pened eee sence AE EENE ARAETA Eiai 17 Projector Parts Control Paneles ae a bela aE aa
56. Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 166 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 19 Todd C Miller Copyright c 1998 Todd C Miller lt Todd Miller courtesan com gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that
57. SO 21118 PowerLite Home Cinema 2000 2D mode Up to 13000 1 in Normal Power Consumption mode PowerLite Home Cinema 2030 2D mode Up to 15000 1 in Normal Power Consumption mode 34 inches 0 86 m to 328 inches 8 33 m 33 inches 0 84 m to 437 inches 11 1 m Front rear ceiling mounted 16 9 Manual Manual optical 1 1 2 2 W monaural 37 dB Normal Power Consumption mode 29 dB ECO Power Consumption mode 120 Keystone correction angle Vertical 30 manual or Auto Keystone Horizontal 30 manual USB Type Mini B port USB 1 1 and 2 0 compliant for service and firmware updating compatibility USB Type A port compatibility One USB 1 1 and 2 0 compliant port for USB device input and Wireless LAN Parent topic Technical Specifications Projector Lamp Specifications Type UHE Ultra High Efficiency Power consumption 200 W Lamp life Normal Power Consumption mode Up to about 5000 hours ECO Power Consumption mode Up to about 6000 hours Note Turn off this product when not in use to prolong the life of the projector Lamp life will vary depending upon mode selected environmental conditions and usage Brightness decreases over time Parent topic Technical Specifications Remote Control Specifications Reception range 19 7 feet 6 m Batteries Two alkaline or manganese AA Parent topic Technical Specifications Projector Dimension Specifications Height excluding feet 4 13 inches 105 mm
58. T OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE 147 THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the library s name and a brief idea of what it does gt Copyright c lt year gt lt name of autho
59. TA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 6 TINET and TOPPERS TINET TCP IP Protocol Stack Copyright C 2001 2006 by Dep of Computer Science and Engineering Tomakomai National College of Technology JAPAN TINET TCP IP Protocol Stack Copyright C 2001 2006 by Dep of Computer Science and Engineering Tomakomai National College of Technology JAPAN The above copyright holder limited to cases in which one satisfies conditions 1 4 below or the conditions described in Version 2 of the GNU Public License officially announced by the Free Software Foundation consents to the use reproduction alteration and redistribution hereafter called utilization of this software this software includes alterations likewise below without compensation 1 When this software is utilized in the form of source code the above copyright declaration these conditions of utilization and the following stipulation of no guarantee shall be included in unchanged form inside the source code 2 When this software is redistributed in a form in which it can be used in the development of other software library form etc the above copyright display these terms of utilization and the following 177 stipulation of no gu
60. a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COS
61. ailable Image Aspect Ratios Parent topic Using Basic Projector Features Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it Note For HDMI sources the input signal determines the image s aspect ratio 1 Turn on the projector and switch to the image source you want to use 2 Press the Aspect button on the remote control 2D 3D Color Mode Fast Fine O 3D Format RGBCMY Auto Iris Slideshow Patt Aspect V Mute A list of the available aspect ratios appears 3 Tocycle through the available aspect ratios for your input signal press the up or down arrow buttons repeatedly Press Enter to select the highlighted aspect ratio Parent topic Image Aspect Ratio Available Image Aspect Ratios You can select the following image aspect ratios depending on the input signal from your image source Note When the projector is in 3D mode the aspect ratio is automatically set to Normal 62 Note Black bands and cropped images may project in certain aspect ratios depending on the aspect ratio and resolution of your input signal Auto Automatically sets the aspect ratio according to the input signal sets the aspect ratio according to the input signal Displays images using the full projection area and maintains the aspect ratio of the image Displays images using the full width of the projection area and maintains the aspect ratio of the image Displays images using the full wi
62. al speakers 27 Parent topic Connecting to Video Sources Related tasks Connecting to External Speakers Connecting to a Component to VGA Video Source If your video source has component video ports you can connect it to the projector using an optional component to VGA video cable Depending on your component ports you may need to use an adapter cable along with a component video cable 1 Connect the component connectors to your video source s color coded component video output ports usually labeled Y Pb Pr or Y Cb Cr If you are using an adapter connect these connectors to your component video cable 2 Connect the VGA connector to a PC port on the projector ip Bo 3 Tighten the screws on the VGA connector If your image colors appear incorrect you may need to change the PC Signal setting in the projector s Extended menu to Component Note If you connected a game console it may take a few seconds for your image to appear when you switch to the game console s input source To reduce the potential lag in response time to game commands set your game console s output format to a progressive signal of 480p or 720p See your game console documentation for instructions You can also select the Fast setting using the Fast Fine button on the remote control to reduce lag time Parent topic Connecting to Video Sources Related references Projector Setup Settings Extended Menu 28 Related tasks Conne
63. and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 16 FreeBSD Copyright c 1997 2002 FreeBSD Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 165 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or
64. ansitions between images with a wipe effect Transitions between images with a dissolve effect Random Transitions between images using a random variety of effects Parent topic Starting a Slide Show 70 Adjusting Projector Features Follow the instructions in these sections to use your projector s feature adjustments Shutting Off the Picture and Sound Temporarily Projector Security Features Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience s attention during a presentation Any sound or video action continues to run however so you cannot resume projection at the point that you stopped it 1 Press the A V Mute button on the remote control to temporarily stop projection and mute any sound 2D 3D Color Mode Fast Fine 3D Format RGBCMY Auto Iris Slideshow Pattern Aspect V Mute 2 To turn the picture and sound back on press A V Mute again Note You can also stop projection using the A V Mute slide lever on the projector Parent topic Adjusting Projector Features Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features Button lock security to block operation of the projector using the buttons on the control panel e Security cabling to physically cable the projector in place Locking the Projector s Buttons Installing a Se
65. arantee shall be inserted in documentation accompanying redistribution user s manual etc 3 When this software is redistributed in a form in which it cannot be used in the development of other software embedded in devices etc following conditions shall be satisfied a The above copyright display these terms of utilization and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution user s manual etc 4 The above copyright holder and the TOPPERS Project shall be exempt from responsibility for whatever damages occur either directly or indirectly through the utilization of this software This software is something that is provided with no guarantee The above copyright holder and the TOPPERS Project make no guarantee whatsoever in regard to this software including the possibility of its application In addition the above copyright holder and the TOPPERS Project shall also not bear responsibility for whatever damages occur either directly or indirectly through the utilization of this software Bluetopia is provided for your use by Stonestreet One LLC under a software license agreement Stonestreet One LLC is and shall remain the sole owner of all right title and interest whatsoever in and to Bluetopia and your use is subject to such ownership and to the license agreement Stonestreet One LLC reserves all rights related to Bluetopia not expressly granted under the licens
66. arent topic Solving Image or Sound Problems Related references Projector Feature Settings Settings Menu Related tasks Correcting Image Shape with the Keystone Buttons Correcting Image Shape with the Horizontal Keystone Slider Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference noise or static try the following solutions e Check the cables connecting your computer or video source to the projector They should be Separated from the power cord to prevent interference e Securely connected at both ends e Not connected to an extension cable No longer than 10 feet 3 m e Check the settings on the projector s Signal menu to make sure they match the video source e Select a computer video resolution and refresh rate that are compatible with the projector e If you adjusted the image shape using the projector controls try decreasing the Sharpness setting to improve image quality e If you connected an extension power cable try projecting without it to see if it caused interference in the signal Parent topic Solving Image or Sound Problems Related references Input Signal Settings Signal Menu Supported Video Display Formats Image Quality Settings Image Menu 112 Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry try the following solutions Adjust the image focus Clean the projector lens Note To avoid condensatio
67. as you project a presentation with audio The volume buttons control the projector s internal soeaker system or any external speakers you connected to the projector You must adjust the volume separately for each connected input source 65 1 Turn on the projector and start a presentation that includes audio 2 To lower or raise the volume press the Volume buttons on the remote control or these buttons on the control panel oF A volume gauge appears on the screen 3 To set the volume to a specific level for an input source use the projector menus Parent topic Using Basic Projector Features Related references Projector Feature Settings Settings Menu Projecting a Slide Show You can use your projector s Slideshow feature whenever you connect a USB device that contains compatible image files This lets you quickly and easily display a slide show and control it using the projector s remote control Supported Slideshow File Types Slideshow Features Starting a Slide Show Parent topic Using Basic Projector Features Related concepts USB Device Projection Related tasks Connecting a USB Device or Camera to the Projector Supported Slideshow File Types You can project these types of files using the projector s Slideshow feature 66 Note For best results place your files on media that is formatted in FAT16 32 File contents File type extension Image Make sure the file is not e CMYK format e Progres
68. atio to make the edges visible by a selectable percentage or automatically 80 Setting Options Description _ HDMI Video Range Sets the video range to match the setting of the device connected to the HDMI input port Auto detects the video range automatically Normal normally for images from a device other than a computer can also be selected if the black areas of the image are too bright Expanded normally for images from a computer can also be selected if the image is too dark Note Can only be set when Epson Super White located in the Advanced setting under the Image menu is set to Off Image Processing Adjusts how images are processed Fast displays images quicker Fine displays images in higher quality Note The Reset setting does not reset the Diagonal Screen Size 3D Viewing Notice Aspect and Image Processing settings Parent topic Adjusting the Menu Settings Related references Available Image Aspect Ratios Projector Feature Settings Settings Menu Options on the Settings menu let you customize various projector features 81 Volume 0 HDMI Link Lock Setting Projection Front User Button 2D to 3D Conver Options Description Keystone H V Keystone Adjusts image shape to rectangular horizontally and Auto V Keystone vertically Rene yotone Adjuster H V Keystone lets you manually correct horizontal and vertical sides Auto V Keystone enables or disables aut
69. brary The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modification
70. chemicals including lead known to the State of California to cause birth defects or other reproductive harm Wash hands after handling This notice is provided in accordance with Proposition 65 in Cal Health amp Safety Code 25249 5 and following 3D Safety Instructions Restriction of Use Parent topic Notices 129 3D Safety Instructions Follow these 3D safety instructions when setting up and using the projector e If you or any viewer experiences the following symptoms or other major discomfort from viewing 3D video images immediately stop viewing and contact your health care provider convulsions eye or muscle twitching loss of awareness altered vision involuntary movements disorientation eye strain nausea vomiting dizziness headaches fatigue or blurry double vision that lasts longer than few seconds Do not engage in any potentially hazardous activity such as driving a vehicle or operating machinery until your symptoms have completely gone away If the symptoms persist discontinue use and do not resume stereoscopic 3D viewing without discussing your symptoms with a health care provider physician e Some viewers may experience a seizure or blackout when exposed to flashing images or lights contained in certain 3D content Anyone who has a history of seizures loss of awareness symptoms linked to an epileptic condition or has a family history of epilepsy should contact a health care provider before using the 3D func
71. conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 33 Daniel Eischen targets using libc posix 171 Copyright c 2001 Daniel Eischen lt deischen FreeBSD org gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWAR
72. conditions apply to any software derived from or based on the IJG code not just to the unmodified library If you use our work you ought to acknowledge us Permission is NOT granted for the use of any IJG author s name or company name in advertising or publicity relating to this software or products derived from it This software may be referred to only as the Independent JPEG Group s software We specifically permit and encourage the use of this software as the basis of commercial products provided that all warranty or liability claims are assumed by the product vendor ansi2knr c is included in this distribution by permission of L Peter Deutsch sole proprietor of its copyright holder Aladdin Enterprises of Menlo Park CA ansi2knr c is NOT covered by the above copyright and conditions but instead by the usual distribution terms of the Free Software Foundation principally that you must include source code if you redistribute it See the file ansi2knr c for full details However since ansi2knr c is not needed as part of any program generated from the IJG code this does not limit you more than the foregoing paragraphs do The Unix configuration script configure was produced with GNU Autoconf It is copyright by the Free Software Foundation but is freely distributable The same holds for its supporting scripts config guess config sub Itconfig Itmain sh Another support script install sh is copyright by M I T but is also freely di
73. connect external speakers 1 Make sure your computer or video source is connected to the projector with both audio and video cables as necessary 2 Locate the appropriate cable to connect your external speakers such as a stereo mini jack to pin jack cable or another type of cable or adapter 3 Connect one end of the cable to your external speakers as necessary 32 4 Connect the stereo mini jack end of the cable to your projector s Audio Out port t 4 Q Parent topic Projector Connections Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source Disconnecting a USB Device or Camera From the Projector Parent topic Projector Connections USB Device Projection You can project images and other content without using a computer or video device by connecting any of these devices to your projector e USB flash drive e Digital camera or smartphone e USB hard drive e Multimedia storage viewer e USB memory card reader Note Digital cameras or smartphones must be USB mounted devices not TWAIN compliant devices and must be USB Mass Storage Class compliant Note USB hard drives must meet these requirements e USB Mass Storage Class compliant not all USB Mass Storage Class devices are supported 33 e Formatted in FAT or FAT3
74. cting to a Video Source for Sound Connecting to a Composite Video Source If your video source has a composite video port you can connect it to the projector using an optional RCA style video or A V cable 1 Connect the cable with the yellow connector to your video source s yellow video output port 2 Connect the other end to the projector s Video port Parent topic Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Video Source for Sound You can play sound through the projector s speaker system if your video source has audio output ports Connect the projector to the video source using an RCA audio cable Note If you connected your video source to the projector using an HDMI or MHL cable the audio signal is transferred with the video signal you do not need an additional cable for sound 1 Connect the audio cable to your video source s audio out ports 29 2 Connect the other end of the cable to the projector s Audio port or ports Note To add additional sound connect your video source and speakers to an audio video receiver then connect the receiver to the projector using one of the receiver s compatible video outputs an HDMI connection provides the best image quality if available You can also connect speakers to any video source that has its own speaker connections External powered speakers or headphones can also be connected to the Audio Ou
75. curity Cable Parent topic Adjusting Projector Features 71 Locking the Projector s Buttons You can lock the buttons on the projector s control panel to prevent anyone from using the projector You can lock all the buttons or all the buttons except the power button 1 Press the Menu button 2 Select the Settings menu and press Enter 5 6 Keystone Volume 0 HDMI Link Lock Setting Projection Front User Button 2D to 3D Conver Reset Select the Lock Setting setting and press Enter Select one of these lock types and press Enter e To lock the projector s power button select Child Lock To turn the projector on you must press the power button for longer than three seconds e To lock all buttons except the power button select Control Panel Lock You see a confirmation prompt Select Yes and press Enter Restart the projector for the lock settings to take effect Unlocking the Projector s Buttons Parent topic Projector Security Features Related references Projector Feature Settings Settings Menu 72 Unlocking the Projector s Buttons If the projector s buttons have been locked hold the Enter button on the projector s control panel for seven seconds to unlock them Parent topic Locking the Projector s Buttons Related references Projector Feature Settings Settings Menu Installing a Security Cable You can install two types of security cables on the projector to deter theft
76. d this permission notice and warranty disclaimer appear in supporting documentation and that the name of Lucent or any of its entities not be used in advertising or publicity pertaining to distribution of the software without specific written prior permission LUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS INNO EVENT SHALL LUCENT OR ANY OF ITS ENTITIES BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE 4 Advanced Micro Devices Copyright 1989 1990 Advanced Micro Devices Inc This software is the property of Advanced Micro Devices Inc AMD which specifically grants the user the right to modify use and distribute this software provided this notice is not removed or altered All other rights are reserved by AMD AMD MAKES NO WARRANTY OF ANY KIND EXPRESS OR IMPLIED WITH REGARD TO THIS SOFTWARE IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING PERFORMANCE OR USE OF THIS SOFTWARE So that all may benefit from your experience please report any problems or suggestions about this software to the 29K Technical Support Center at 800 29 29 AMD 800 292 9263 in the USA
77. de its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License 13
78. do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribut
79. dth of the projection area but does not maintain the aspect ratio Note The Auto aspect ratio setting is available only for HDMI image sources Parent topic Image Aspect Ratio Color Mode The projector offers different Color Modes to provide optimum brightness contrast and color for a variety of viewing environments and image types You can select a mode designed to match your image and environment or experiment with the available modes If you always want to use a particular color mode for a certain video input source you can select it using the projector menus Changing the Color Mode Available Color Modes Turning On Auto Iris Parent topic Using Basic Projector Features Related references Image Quality Settings Image Menu Changing the Color Mode You can change the projector s Color Mode using the remote control to optimize the image for your viewing environment 1 Turn on the projector and switch to the image source you want to use 63 2 If you are projecting from a DVD player or other video source insert a disc or other video media and press the play button if necessary 3 Press the Color Mode button on the remote control to change the Color Mode 2D 3D Color Mode Fast Fine 3D Format Y Auto Iris Slideshow Patten Aspect AIV Mute A list of available Color Modes appears 4 To cycle through all the available Color Modes for your input signal press the up or down arrow buttons repeatedly Pre
80. e to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies 174 of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE TOPPERS JSP This projector product includes the open source software program TOPPERS JSP which applies the terms and conditions provided by owner of the copyright to the TOPPERS JSP The TOPPERS JSP are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of TOPPERS JSP programs jsp 1 4 3 License terms of conditions of each program which are provided by owner of the copyright to the TOPPERS JSP are as follows TOPPERS JSP Kernel Toyohashi Open Platform for Embedded Real Time Systems Just Standard P
81. e if necessary e Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source e Check the audio cable connections between the projector and your video source e If you do not hear sound from an HDMI source set the connected device to PCM output e Make sure any connected audio cables are labeled No Resistance e If you are using a Mac and you do not hear sound from an HDMI source make sure your Mac supports audio through the HDMI port If not you need to connect an audio cable e If you turn the projector on immediately after turning it off the cooling fans may run at high speed momentarily and cause an unexpected noise This is normal Parent topic Solving Image or Sound Problems 115 Related concepts Projector Connections Related tasks Controlling the Volume with the Volume Buttons Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control Solutions to Projector Power or Shut Off Problems Solutions to Problems with the Remote Control Parent topic Solving Problems Solutions to Projector Power or Shut Off Problems If the projector does not come on when you press the power button or it shuts off unexpectedly try the following solutions Make sure the power cord is securely connected to the projector and to a working electrical outlet e The projector
82. e USB Type A port RGBCMY button adjusts hue saturation and brightness for each RGBCMY color Mute button turns off sound only Volume up down buttons adjust speaker volume Esc button cancels exits functions Enter button selects options Default button returns selected setting to default value Fast Fine button improves image response time for high frame rate sources Auto Iris button optimizes the image based on brightness of content Aspect button selects the image aspect ratio A V Mute button turns off picture and sound Pattern button displays a test pattern Parent topic Projector Part Locations 20 Setting Up the Projector Follow the instructions in these sections to set up your projector for use Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project an image You can also install the projector in a ceiling mount if you want to use it in a fixed location Keep these considerations in mind as you select a projector location e Place the projector on a sturdy level surface or install it using a compatible mount e Leave plenty of space around and under the projector for ventilation and do not place it on top of or next to anything that could block the vents e Position the projector within reach of a grounded electrical outlet or extension cord Projector Setu
83. e agreement and no other rights or licenses are granted either directly or by implication estoppel or otherwise or under any patents copyrights mask works trade secrets or other intellectual property rights of Stonestreet One LLC 2000 2012 Stonestreet One LLC All Rights Reserved Parent topic Notices Copyright Notice All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation The information contained herein is designed only for use with this Epson product Epson is not responsible for any use of this information as applied to other products Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions 178 Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporat
84. e use of the PNG Reference Library even if advised of the possibility of such damage Permission is hereby granted to use copy modify and distribute this source code or portions hereof for any purpose without fee subject to the following restrictions 1 The origin of this source code must not be misrepresented 2 Altered versions must be plainly marked as such and must not be misrepresented as being the original source 3 This Copyright notice may not be removed or altered from any source or altered source distribution The Contributing Authors and Group 42 Inc specifically permit without fee and encourage the use of this source code as a component to supporting the PNG file format in commercial products If you use this source code in a product acknowledgment is not required but would be appreciated 153 A png_get_copyright function is available for convenient use in about boxes and the like printf s ong_get_copyright NULL Also the PNG logo in PNG format of course is supplied in the files pngbar png and pngbar jpg 88x31 and pngnow png 98x31 Libpng is OSI Certified Open Source Software OSI Certified Open Source is a certification mark of the Open Source Initiative Glenn Randers Pehrson glennrp users sourceforge net March 29 2012 zlib This projector product includes the open source software program zlib which applies the terms and conditions provided by owner of the copyright to the z
85. east three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable 145 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the
86. ee ae 30 Connecting to a Computer for HDMI Video and Audio cceeeeeee scene eeeeeeeeeeteeeeeetenaeeeeenaees 31 Connecting to a Computer for SOUNG sc ccctenss ods eect induces oes ea vas Meee solactendyes aed olen ties 32 Connecting to External Speakers c ccisciccccssitesiy se acenstsennekencnknessttee cayhees tend eeaeieheceeeeed eeeeeenseheredd 32 Connecting to External USB Devices veccicisececevaiscteienstietcns vad eeeeinctues shed tbeteudecnanacstbenadeveddeeneiolavetoeee 33 USB Device Projecto Niestern e anie Helv anes REA AEAEE Ee RES 33 Connecting a USB Device or Camera to the ProjeCtor ccceeceeeceeeeeeeeeeeeeeeeeeeeneeeeetenaeeeeeeaees 34 Selecting the Connected USB Source sos esses aes adstlanrent Roxivanagyadae seca easiest 34 Disconnecting a USB Device or Camera From the Projector ccccceeeeeeeeeeeeeeeeeeeeeteeeeeneeees 35 Installing Batteries in the Remote Control cecccceeesecceeeeeeeeeeeeeeeeeeeeeaaeeseseeeeeeeaaeeeesssaeeeeeeaaaeeeenaas 35 Opening the Lens Cover seren peiie ea A a E E e a alot 37 Wireless Network Projection sisiicesdiiatesns cntchiasaSceccahasiebsShednenddchatieiwasceahasasdeptantuttnianeaivantansaedaeeecteaneanedsce 38 Installing the Wireless LAN Module seeennersnnrrnnoornnrnnnsrsnnnunnnsusseraneneaaeeonrrnnnarronnrunannnunnnuunnnnneeeennene 38 Selecting Wireless Network Settings Manually cccccceeeeeeeeeeeceeeeeeeeeeeeeeaeeeeeeeeeeeeeeaeeeeenetaeeeeeenees
87. eed to set up the laptop to display on an external monitor 1 Hold down the laptop s Fn key and press the key labelled with a monitor icon or CRT LCD See your laptop manual for details Wait a few seconds for an image to appear 2 Todisplay on both the laptop s monitor and the projector try pressing the same keys again If the same image is not displayed by the laptop and projector check the Windows Display utility to make sure the external monitor port is enabled and extended desktop mode is disabled See your computer or Windows manual for instructions 4 If necessary check your video card settings and set the multiple display option to Clone or Mirror Parent topic Solutions When No Signal Message Appears Displaying From a Mac Laptop If you see the No Signal message when you display from a Mac laptop you need to set up the laptop for mirrored display See your laptop manual for details 1 Open the System Preferences utility and select Displays 110 2 Select the Display or Color LCD option if necessary 3 Click the Arrange or Arrangement tab 4 Select the Mirror Displays checkbox Parent topic Solutions When No Signal Message Appears Solutions When Not Supported Message Appears If the Not Supported message appears try the following solutions Make sure the correct input signal is selected on the Extended menu e Make sure the computer s display resolution does not exceed the projector s resoluti
88. ees 93 Air Filter and Vent Maintenance 3 202225 cacesecsid dees seed matens Heer sdetasstane seed a tds eeteeradn edneensvadoeredebeaes 94 Cleaning the Air Filter and Vent cececcceeeesseeeeeeeeeeeseaaeeeeeaaeeeeeeaaaeeesaaeesseseeeeeeesaaeeseenenes 94 Replacing thie Air Filten scent ones ann e a eens ada Meebo neat 95 Projector Lamp Maintenances cc ceicsleciy ces geass ccs eta ectes aah cpus aded es eetswe ts eee BAG cere 97 R placingthe Lamp sic fate alee ot Sones ete a a ans Banal don eases T ated ete ane Gd 98 Resetting the Lamp TImer iicskctieed neste tevetevianshieeloanloenes eiuede etd dadakenaadeeeeienatenaans 102 Replacing the Remote Control Batteries 0 ceecceeeeeseeeeeeeeceeeeeneaeeeeeaeeeeeesaaaeeeeeeeeeeeeaaaeeeenaas 103 Transporting th Projecto ls sects cs antacids arctan A E ene oaa Taaa aa a a Taiana 104 SOIVING Pro lE MS a a eaae ea se eet tected ete eet eee ier ed le 105 Projection Problemi THOS amir inai en cai eee ON ated need ted Sate is ous ENET tin fue ae te ons aena 105 Projector Light Status cic eccexictear steels cere tiateeasd a a a a e i 105 Solving Image or Sound ProblemS ris eceiecdeccuzssbeeteeias scene todechedad retort ygaslansaceieecssaigel atsborteeseuumarenenes 108 Solutions When No Image Appear Sg tice setestecece deel h eewcehlies dase ead ated ciuasineneed Seeteonneeteas 109 Solutions When No Signal Message Appeal S cc cccceeeeeeeeeeeeeeeeseaeeeeeeeeeeeeseeeeeeenseeeeesenneeees 110
89. eft The settings for each menu are displayed on the right Note The available settings depend on the current input source To change settings in the displayed menu press Enter Press the up or down arrow button to move through the settings Change the settings using the buttons listed on the bottom of the menu screens To return all the menu settings to their default values select Reset 75 7 When you finish changing settings on a menu press Esc 8 Press Menu or Esc to exit the menus Parent topic Adjusting the Menu Settings Image Quality Settings Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using The available settings depend on the currently selected input source Color Mode Dynamic Brightness Contrast Color Saturation Tint Sharpness Color Temp Advanced Power Consumption Normal Auto Iris Off Reset To change settings for an input source make sure the source is connected and select that source Setting Options Description _ Color Mode See the list of available Color Adjusts the vividness of image Modes colors for various image types and environments Brightness Varying levels available Lightens or darkens the overall image Contrast Varying levels available Adjusts the difference between light and dark areas of the image Color Saturation Varying levels available Adjusts the intensity of the image colors 76
90. ent and Replacement Parts Related tasks Replacing the Lamp Resetting the Lamp Timer Event ID Code List If the Event ID option on the Info menu displays a code number check this list of Event ID codes for the solution to the projector problem associated with the code Event ID code Cause and solution 0432 The EasyMP Network Projection program did not start Turn the projector off and 04g lass Jeen on again 0434 Unstable network communication Check the network communication status wait a 0481 few moments and try connecting to the network again io 0485s 0433 Cannot display the transferred images Restart the EasyMP Network Projection program 89 Event ID code Cause and solution 0484 Communication with computer was disconnected Restart the EasyMP Network Projection program 0483 The EasyMP Network Projection program quit unexpectedly Check the network O4FE communication status then turn the projector off and then on again 0479 A projector system error has occurred Turn the projector off and then on again 04FF 0891 Cannot find an access point with the same SSID Set your computer access point and projector to the same SSID 0892 The WPA WPA2 authentication type does not match Make sure the wireless network security settings are correct 0894 Communication with unauthorized access point was disconnected Contact your network administrator 0898 Failed to acquire DHCP address Make sure the DHCP s
91. ered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at l
92. erver is operating correctly If you are not using DHCP turn off the DHCP setting in the Network menus A communication error has occurred Try restarting the EasyMP Network Projection program and restarting your projector If that does not solve the problem contact Epson for help Parent topic Projector Information Display Info Menu Projector Reset Options Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu You can also reset the projector s lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option 90 Reset All Reset Lamp Hours You cannot reset the following settings using the Reset All option e PC Signal e Language e Lamp Hours e All settings in the Network menu Parent topic Adjusting the Menu Settings 91 Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best You may need to clean the lens periodically and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation The only parts you should replace are the lamp air filter and remote control batteries If any other part needs replacing contact Epson or an authori
93. es of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE A copy of this license is available at http www opensource org licenses Any Red Hat trademarks that are incorporated in the source code or documentation are not subject to the BSD License and may only be used or replicated with the express permission of Red Hat Inc 2 University of California Berkeley Copyright c 1981 2000 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL
94. ese conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part o
95. etails The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs LGPL Programs glibc 2 8 SDL 1 2 13 SDL Image The GNU Lesser General Public License Version 2 is as follows You also can see the GNU Lesser General Public License Version 2 at http www gnu org licenses GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users 140 This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based
96. f a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library 143 In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part o
97. f the code of the Library into a program that is nota library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header f
98. f the projector shut down any computer connected to it so you can see the computer display during shutdown Note Turn off this product when not in use to prolong the life of the projector Lamp life will vary depending upon mode selected environmental conditions and usage Brightness decreases over time Note When using the A V Mute feature the projector lamp is still on To turn off the lamp turn off the projector 1 Press the power button on the projector or the remote control The projector displays a shutdown confirmation screen Power Off Yes Press button No Press any other button 47 2 Press the power button again To leave it on press any other button The projector beeps twice the lamp turns off and the Status light turns off Note With Epson s Instant Off technology there is no cool down period so you can pack up the projector for transport right away if necessary Caution Do not turn the projector on immediately after turning it off Turning the projector on and off frequently may shorten the life of the lamp 3 To transport or store the projector make sure the Status light is off then unplug the power cord Caution To avoid damaging the projector or lamp never unplug the power cord when the Status light is on or flashing 4 Close the projector s lens cover eS a 48 Parent topic Using Basic Projector Features Viewing 3D Images You can view 3D images using your projector
99. following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of KTH nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY KTH AND ITS CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL KTH OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 14 Alexey Zelkin Copyright c 2000 2001 Alexey Zelkin lt phantom FreeBSD org gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted
100. half of the copyright owner For the purposes of this definition submitted means any form of electronic verbal or written communication sent to the Licensor or its representatives including but not limited to communication on electronic mailing lists source code control systems and issue tracking systems that are managed by or on behalf of the Licensor for the purpose of discussing and improving the Work but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as Not a Contribution Contributor shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work 2 Grant of Copyright License Subject to the terms and conditions of this License each Contributor hereby grants to You a perpetual worldwide non exclusive no charge royalty free irrevocable copyright license to reproduce prepare Derivative Works of publicly display publicly perform sublicense and distribute the Work and such Derivative Works in Source or Object form 3 Grant of Patent License Subject to the terms and conditions of this License each Contributor hereby grants to You a perpetual worldwide non exclusive no charge royalty free irrevocable except as stated in this section patent license to make have made use offer to sell sell import and otherwise transfer the Work where such license applies
101. he screen color or logo to display when no signal is received Startup Screen controls whether a special screen appears when the projector starts up Video Signal Video Signal Specifies the signal type from input sources PC Signal connected to the Video port or select Auto to detect the signal automatically PC Signal Specifies the signal type from input sources connected to the PC port or select Auto to detect the signal automatically Language Various languages available Selects the language for projector menu and message displays not changed by Reset option Note The Reset setting does not reset the High Altitude Mode PC Signal and Language settings Parent topic Adjusting the Menu Settings Projector Network Settings Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network 86 Net Info Wireless LAN Network Configuration Setting Options Description Net Info Wireless LAN Connection mode Displays wireless network status Wireless LAN system and details Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Network Configuration Accesses additional network Configures your network settings menus Parent topic Adjusting the Menu Settings 87 Projector Information Display Info Menu You can display information about the projector and inp
102. he supplied charging cable and connect the cable to the USB port designated by Epson Do not charge the 3D glasses using other devices as it may cause the battery to leak overheat ignite or explode Do not drop the 3D glasses or press too forcefully on them If the glass sections or other parts are broken an injury could occur Store the glasses in the soft case supplied with them Be careful of the edges of the frame when wearing the 3D glasses and do not place your finger in any of the moving sections such as the hinges Otherwise you could injure your eyes or fingers e When disposing of the 3D glasses follow any local rules and regulations Parent topic Important Safety Instructions Restriction of Use When this product is used for applications requiring high reliability safety such as transportation devices related to aviation rail marine automotive disaster prevention devices various safety devices or functional precision devices you should use this product only after giving consideration to including fail safes and redundancies into your design to maintain safety and total system reliability Because this product was not intended for use in applications requiring extremely high reliability safety such as aerospace equipment main communication equipment nuclear power control equipment or 131 medical equipment related to direct medical care please make your own judgment on this product s suitability after a full eva
103. hin such NOTICE file excluding those notices that do not pertain to any part of the Derivative Works in at least one of the following places within a NOTICE text file distributed as part of the Derivative Works within the Source form or documentation if provided along with the Derivative Works or within a display generated by the Derivative Works if and wherever such third party notices normally appear The contents of the NOTICE file are for informational purposes only and do not modify the License You may add Your own attribution notices within Derivative Works that You distribute alongside or as an addendum to the NOTICE text from the Work provided that such additional attribution notices cannot be construed as modifying the License You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use reproduction or distribution of Your modifications or for any such Derivative Works as a whole provided Your use reproduction and distribution of the Work otherwise complies with the conditions stated in this License 5 Submission of Contributions Unless You explicitly state otherwise any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License without any additional terms or conditions Notwithstanding the above nothing herein shall supersede or modify the terms of any separate
104. ies or wires and do not sit near objects that could be broken if accidentally hit e The following people should limit 3D content viewing e People with a history of photosensitivity e People with heart disease People in poor health 130 e People who are sleep deprived e People who are physically tired e People under the influence of drugs or alcohol e Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects e SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY Do not use the device near any medical equipment or equipment that is automatically controlled such as automatic doors or fire alarms Electromagnetic interference from the device may cause such equipment to malfunction and cause an accident Do not disassemble or modify the 3D glasses This could cause a fire to occur or the images to appear abnormal when viewing causing you to feel ill Do not leave the 3D glasses or any parts supplied with the glasses within reach of children They could be accidentally swallowed If anything is accidentally swallowed contact a doctor immediately Do not place the 3D glasses in a fire or on a heat source or leave them unattended in a location subject to high temperatures Because this device has a built in rechargeable lithium battery it could cause burns or a fire if it ignites or explodes When charging the 3D glasses only use t
105. igh Altitude Mode to ensure the projector s internal temperature is regulated properly Connecting to Video Sources Connecting to Computer Sources 25 Connecting to External Speakers Connecting to External USB Devices Parent topic Setting Up the Projector Related references Projector Setup Settings Extended Menu Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector Connecting to an HDMI Video Source Connecting to an MHL Compatible Device Connecting to a Component to VGA Video Source Connecting to a Composite Video Source Connecting to a Video Source for Sound Parent topic Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port you can connect it to the projector using an optional HDMI cable The HDMI connection provides the best image quality 1 Connect the HDMI cable to your video source s HDMI output port 2 Connect the other end to one of the projector s HDMI ports Note The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers Note If you connected a game console it may take a few seconds for your image to appear when you switch to the game console s input source To reduce the potential lag in response time to game 26 commands set your game conso
106. igh temperatures may reduce the life of your projector or lamp Damage due to the failure to properly maintain the projector or its filter may not be covered by the projector or lamp Limited Warranties Cleaning the Air Filter and Vents Replacing the Air Filter Parent topic Projector Maintenance Related references Projector Light Status Cleaning the Air Filter and Vents Clean the projector s air filter or vents if they get dusty or if you see a message telling you to clean them 1 Turn off the projector and unplug the power cord 94 2 Gently remove the dust using a small vacuum designed for computers or a very soft brush such as a paintbrush Note You can remove the air filter so you can clean both sides of it Do not rinse the air filter in water or use any detergent or solvent to clean it Caution Do not use canned air The gases may leave a flammable residue or push dust and debris into the projector s optics or other sensitive areas 3 If dust is difficult to remove or the air filter is damaged replace the air filter Parent topic Air Filter and Vent Maintenance Related tasks Replacing the Air Filter Replacing the Air Filter You need to replace the air filter in the following situations e After cleaning the air filter you see a message telling you to clean or replace it e The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table 1
107. ight output and 2000 lumens of white brightness white light output Note Color brightness color light output and white brightness white light output will vary depending on usage conditions Color light output measured in accordance with IDMS 15 4 white light output measured in accordance with ISO 21118 e 1080p native resolution Images up to 300 inches 7 62 m Project on any wall or screen Full 3D projection e Active 3D projection with RF active shutter glasses e Supports side by side top and bottom and frame packing 3D formats Flexible connectivity e Two HDMI ports for computer or video device connection e One MHL Mobile High definition Link compatible HDMI port for high quality audio and video from tablets and smartphones PC Free photo slide shows via connected USB memory devices e Audio Out port for connection to external speakers or stereo system 10 Easy to use setup and operation features e Real time automatic vertical keystone correction and horizontal keystone correction slider for flexible projector placement Epson s Instant Off and Direct Power On features for quick setup and shut down e 1 2x optical zoom ratio for improved zooming capability Product Box Contents Additional Components Optional Equipment and Replacement Parts Warranty and Registration Information Parent topic Introduction to Your Projector Product Box Contents Save all the packaging in case you need to ship the project
108. ile that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 144 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are cov
109. inches 381 cm 161 to 194 e emer r 4 3 Aspect Ratio Image or Screen Screen or image size Projection distance D a inaerae 1 50 inches 126 cm 65 to 78 inches a 2 3 100 inches 254 cm 131 to 158 inches Po lewwenm 4 150 inches 381 cm 198 to 238 inches emee emen O 16 10 Aspect Ratio Image or Screen 24 Screen or image size Projection distance romero Inara 1 50 inches 126 cm 57 to 69 inches ferme eenen oo Parent topic Projector Placement Projector Connections You can connect the projector to a variety of computer video and audio sources to display presentations movies or other images with or without sound e For video projection connect devices such as DVD players gaming consoles streaming devices digital cameras smartphones and tablets with compatible video output ports Note To connect a smartphone or tablet you may need to obtain an adapter that allows you to connect to the projector This allows you to mirror your smartphone or tablet screens watch movies and more Contact your device manufacturer for compatible adapter options e For sound you can connect audio input cables if necessary Connect any type of computer that has a standard video output monitor port or HDMI port For slide shows without a video source or computer you can connect USB devices such as a flash drive or camera Caution If you will use the projector at altitudes above 4921 feet 1500 m turn on H
110. ion This information is subject to change without notice A Note Concerning Responsible Use of Copyrighted Materials Copyright Attribution Parent topic Notices A Note Concerning Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product While some countries laws permit limited copying or reuse of copyrighted material in certain circumstances those circumstances may not be as broad as some people assume Contact your legal advisor for any questions regarding copyright law Parent topic Copyright Notice Copyright Attribution This information is subject to change without notice 2013 Epson America Inc 12 13 CPD 39554R1 Parent topic Copyright Notice 179
111. ion and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 169 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 30 Alex Tatmanjants targets using libc posix Copyright c 1995 Alex Tatmanjants lt alex elvisti kiev ua gt at Electronni Visti IA Kiev Ukraine All rights reserved Redistribution and use in source and binary forms with or without modification are
112. ion of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice 137 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Founda
113. ions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 32 Andrey A Chernov targets using libc posix Copyright C 1996 by Andrey A Chernov Moscow Russia All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of
114. is projector product If you desire to receive the source code of the GPL Programs contact Epson as described in the User s Guide These GPL Programs are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details The list of GPL Programs is as follows and the names of author are described in the source code of the GPL Programs The list of GPL Programs busybox 1 13 4 iptables 1 4 4 libgcc1 gcc 4 3 3 lipstdc 6 0 10 133 linux 2 6 27 patches udhcp 0 9 8 uve rev 219 wireless tools 29 EPSON original drivers Stonestreet One Drivers The GNU General Public License Version 2 is as follows You also can see the GNU General Public License Version 2 at http www gnu org licenses GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright c 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any
115. ish presenting with a connected USB device or camera you must prepare to disconnect the device from the projector 1 If the device has a power button turn off and unplug the device 2 Disconnect the USB device or camera from the projector Parent topic Connecting to External USB Devices Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector Caution Use only the type of batteries specified in this manual Do not install batteries of different types or mix new and old batteries 1 Open the battery cover 35 2 Insert the batteries with the and ends facing as shown Warning Dispose of used batteries according to local regulations Do not expose batteries to heat or flame Keep batteries out of the reach of children they are choking hazards and are very dangerous if swallowed Parent topic Setting Up the Projector Related references Remote Control Specifications 36 Opening the Lens Cover 1 To open the projector s lens cover slide the A V Mute slide lever until it clicks into the open position a ee 2 Tocover the lens or temporarily turn off the projected picture and sound slide the A V Mute slide cover closed Note The lamp remains on in ECO mode while the lens cover is closed Parent topic Setting Up the Projector 37 Wireless Network Projection You can send images to your projector through a wireless network To do
116. it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances 146 It is
117. l this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free library does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Li
118. lasses You can purchase them from Epson Make sure your 3D glasses are turned on and fully charged If the glasses have entered standby mode slide the power switch on the glasses to the Off position and then back to the On position Make sure your 3D glasses are paired with the projector Make sure you are within the 3D viewing range 114 e Avoid using the projector near wireless networks microwave ovens 2 4 GHz cordless phones or other devices that use the 2 4 GHz frequency band These devices can interfere with the signal between the projector and the 3D glasses e Ifthe other solutions do not not solve the problem change the Inverse 3D Glasses setting on the Signal menu Return the setting to its original value if changing it does not solve the problem Parent topic Solving Image or Sound Problems Related references Projector Feature Settings Settings Menu 3D Viewing Range Optional Equipment and Replacement Parts Related tasks Cleaning the 3D Glasses Charging the 3D Glasses Pairing the 3D Glasses with the Projector Solutions to Sound Problems If there is no sound when you expect it or the volume is too low or high try the following solutions e Adjust the projector s volume settings Press the A V Mute button on the remote control to resume video and audio if they were temporarily stopped e Press the Source button on the projector or a source button on the remote control to switch to the correct input sourc
119. le s output format to a progressive signal of 480p or 720p See your game console documentation for instructions You can also select the Fast setting using the Fast Fine button on the remote control to reduce lag time Note When an audio video source that meets the HDMI CEC standard is connected to the projector s HDMI port you can use the projector s remote control to control certain features of the linked device by pressing the HDMI Link button on the remote control and setting HDMI Link to On Parent topic Connecting to Video Sources Related references Projector Feature Settings Settings Menu Related tasks Connecting to External Speakers Connecting to an MHL Compatible Device If you have an MHL compatible smartphone or tablet you can connect it to the projector using either an MHL cable or an HDMI cable with a device compatible MHL adapter If you have a device with a built in MHL connector plug it directly into the HDMI 1 MHL port Note Some connected devices may not charge when using an MHL adapter 1 Connect the MHL cable or adapter to your device s Micro USB port 2 Ifyou are using an MHL adapter connect it to an MHL compatible HDMI cable 3 Connect the other end of the cable to the projector s HDMI 1 MHL port Note The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to extern
120. lib The zlib are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of zlib programs zlib 1 1 4 License terms of conditions of each program which are provided by owner of the copyright to the zlib are as follows Copyright notice c 1995 1998 Jean loup Gailly and Mark Adler This software is provided as is without any express or implied warranty In no event will the authors be held liable for any damages arising from the use of this software Permission is granted to anyone to use this software for any purpose including commercial applications and to alter it and redistribute it freely subject to the following restrictions 1 The origin of this software must not be misrepresented you must not claim that you wrote the original software If you use this software in a product an acknowledgment in the product documentation would be appreciated but is not required 2 Altered source versions must be plainly marked as such and must not be misrepresented as being the original software 3 This notice may not be removed or altered from any source distribution Jean loup Gailly 154 jloup gzip org Mark Adler madler alumni caltech edu If you use the zlib library in a product we would appreciate not receiving lengthy legal documents to sign The sources are provided for free but without warranty of any kind The library has been entirely written by Jean
121. license agreement you may have executed with Licensor regarding such Contributions 6 Trademarks This License does not grant permission to use the trade names trademarks service marks or product names of the Licensor except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file 7 Disclaimer of Warranty Unless required by applicable law or agreed to in writing Licensor provides the Work and each Contributor provides its Contributions on an AS IS BASIS WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND either express or implied including without limitation any warranties or conditions of TITLE NON INFRINGEMENT MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License 157 8 Limitation of Liability In no event and under no legal theory whether in tort including negligence contract or otherwise unless required by applicable law such as deliberate and grossly negligent acts or agreed to in writing shall any Contributor be liable to You for damages including any direct indirect special incidental or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work including but not limited to damages for loss of goodwill
122. luation Parent topic Important Safety Instructions FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio and television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help WARNING The connection of a non shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment It is the responsibility of the user to ob
123. mage is F ronveeling oriented correctly Rear Rear Ceiling User Button 3D Format Assigns a menu option to the User button on the remote 3D Depth control for one touch access 3D Brightness Inverse 3D Glasses Power Consumption Info Parent topic Adjusting the Menu Settings Related references Projector Setup and Installation Options Related tasks Correcting Image Shape with the Horizontal Keystone Slider Unlocking the Projector s Buttons Locking the Projector s Buttons Correcting Image Shape with the Keystone Buttons Projector Setup Settings Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation 84 Display Input Signal Language English Reset setting Options Description Direct Power On Sleep Mode lIlumination High Altitude Mode 85 Selects various operation options Direct Power On lets you turn on the projector without pressing the power button Sleep Mode automatically turns off the projector after an interval of inactivity Illumination turns off the lights on the projector High Altitude Mode regulates the projector s operating temperature at altitudes above 4921 feet 1500 m Setting Options Description _ Display Messages Selects various display options Display Background Messages controls whether Startup Screen messages are displayed on the screen Display Background selects t
124. mediately after use because it will be extremely hot Before removing the lamp turn off the power and wait at least an hour to allow the lamp to cool completely Do not disassemble the lamp or subject it to impacts Do not place the source of an open flame such as a lit candle on or near the projector Do not block the lens during projection using a book or any object other than the lens cover This could damage the projector or cause a fire Do not modify the power cord Do not place heavy objects on top of the power cord or bend twist or pull it excessively Keep the power cord away from hot electrical appliances If the lamp breaks ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with your eyes or mouth If you do inhale gases or gases come in contact with your eyes or mouth seek medical advice immediately If the projector is mounted overhead and the lamp breaks be careful to prevent pieces of glass from falling into your eyes or mouth when you open the lamp cover If pieces of glass do get into your eyes or mouth seek medical advise immediately Always lower the volume before turning off the projector Turning on the projector with the volume too high can damage your ears Note The lamp s in this product contain mercury Please consult your state and local regulations regarding disposal or recycling Do not put in the trash WARNING The cords included with this product contain
125. n on the lens after bringing the projector in from a cold environment let the projector warm up to room temperature before using it Position the projector close enough to the screen Position the projector so the keystone adjustment angle is not so wide that it distorts the image Turn on automatic keystone adjustment in the projector s menus Adjust the Sharpness setting to improve image quality If any bands or overall blurriness remain display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings If you are projecting from a computer use a lower resolution Parent topic Solving Image or Sound Problems Related references Projection Distance Image Quality Settings Image Menu Related tasks Cleaning the Lens Focusing the Image Using the Focus Ring Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light or the colors are incorrect try the following solutions Press the Color Mode button on the remote control to try different color modes for the image and environment Check your video source settings Adjust the available settings on the Image menu for the current input source such as Brightness Contrast Tint Advanced and or Color Saturation Make sure you selected the correct PC Signal or Video Signal setting on the Extended menu if available for your image source 113 Make sure all the cables are securely connected to the
126. neeeeeesaaaeeeenaes 52 Adjusting the Image Height ti ccssvadt tise onan eed aed eee 53 ag 6 oie 9 fe Siem emer E SR rete A Ie er re see ep er E E A EE EE re oe 54 Correcting Image Shape with the Horizontal Keystone Slider ccccsssccceeeeeessseeeeeeeeeeeseeseaaes 54 Correcting Image Shape with the Keystone Buttons ccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeeeeeeeenaeeees 55 Resizing the Image With the ZOOM Ring ccccceeseseeeeeeeeeeeeenseeneeeeeeeneeeeeeneeeeeeeeeeeeseeeseeneeseneneess 57 Focusing ihe Image Using the Focus Ring sc sdcetesreceectenieiedeadecdes abate aie siete tans 57 FieMmote Control Operati M e end e bate dendeest ae aa led ad mes cated a ae a a r Aeae eesi 58 Selectingian Image SoUrCE nain a e a E a E DA E AA e 59 POISE CHOM NOTO C E E ee ee E E Sanaa Zao vs Gr ae eel 60 Changing the Projection Mode Using the Menus cccceceeeeeeeeeeeeeeeneeeeeeeeeeeeeeeaeeeeenteaeeeeeeeeeee 61 IMACS Aspect Ratio sn aineina eenaa aeaa Aaaa A akaa agen tuccmeubeasuoced aval vpdaguereceepilases tocnemeceud ieee 62 Changing the Image Aspect Ratio cc xscicscerscicsajsncrenseresac tars cte canes inde ateetenesim ade eehbenteaastdtentadeamede 62 Available Image Aspect Ratios 2 cccsicesg heeded ashes cat naceapcidecciededads oc dhcandgiausnee destaaedaseeeedencerpaccamedarans 62 Color MOS oscars te ects n ee cmap ee anteater hehe ete eee ea a 63 Changing the Color Mode fen a cee hak Coe tect A aS
127. ns Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Poly silicon TFT active matrix Resolution 1920 x 1080 pixels Lens F 1 58 to 1 72 Focal length 16 9 to 20 28 mm Color reproduction Full color 1 07 billion colors Brightness PowerLite Home Cinema 2000 Normal Power Consumption mode White light output 1800 lumens ISO 21118 standard Color light output 1800 lumens ECO Power Consumption mode White light output 1200 lumens ISO 21118 standard Note Color brightness color light output and white brightness white light output will vary depending on usage conditions Color light output measured in accordance with IDMS 15 4 white light output measured in accordance with ISO 21118 119 Contrast ratio Image size Projection distance Projection methods Optical aspect ratio width to height Focus adjustment Zoom adjustment Zoom ratio Tele to Wide Internal sound system Noise level PowerLite Home Cinema 2030 Normal Power Consumption mode White light output 2000 lumens ISO 21118 standard Color light output 2000 lumens ECO Power Consumption mode White light output 1400 lumens ISO 21118 standard Note Color brightness color light output and white brightness white light output will vary depending on usage conditions Color light output measured in accordance with IDMS 15 4 white light output measured in accordance with I
128. o bottom to project upside down from a ceiling or wall mount Rear flips the image horizontally to project from behind a translucent screen e Rear Ceiling flips the image over top to bottom and horizontally to project from the ceiling and behind a translucent screen Changing the Projection Mode Using the Menus Parent topic Using Basic Projector Features Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top to bottom and or left to right using the projector menus 1 Turn on the projector and display an image 2 Press the Menu button 3 Select the Settings menu and press Enter Volume 0 HDMI Link Lock Setting Projection Front User Button 2D to 3D Conver Reset 4 Select the Projection setting and press Enter 5 Select a projection mode and press Enter 6 Press Menu or Esc to exit the menus Parent topic Projection Modes Related concepts Projector Placement 61 Image Aspect Ratio The projector can display images in different width to height ratios called aspect ratios Normally the input signal from your video source determines the image s aspect ratio However for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control If you always want to use a particular aspect ratio for a certain video input source you can select it using the projector s menus Changing the Image Aspect Ratio Av
129. o change settings for an input source make sure the source is connected and select that source 78 3D Display 3D Format 3D Depth Diagonal Screen Size 3D Brightness Inverse 3D Glasses 3D Viewing Notice See the list of available aspect ratios Varying levels available Varying levels available 79 Options Description Selects various 3D options 3D Display enables 3D mode 3D Format selects the 3D format 3D Depth sets the depth for the 3D image Diagonal Screen Size Select the actual size of the screen to maximize the 3D effect 3D Brightness adjusts the brightness of the 3D image Inverse 3D Glasses reverses the images projected for the left and right eyes enable only if 3D images are not displaying correctly 3D Viewing Notice enables the viewing notice displayed when 3D mode is activated Sets the aspect ratio width to height ratio for the selected input source not available for HDMI sources Sets the input signal resolution if not detected automatically using the Auto option Adjusts signal to eliminate vertical stripes in computer images Adjusts signal to eliminate fuzziness or flickering in computer images Setting Options Description __ Up down left right Adjusts the image location on the screen Auto Setup Automatically optimizes computer image quality when On Noise Reduction Reduces flickering in analog images in three levels Changes the projected image r
130. o warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library 141 We cal
131. omatic vertical keystone adjustment H Keystone Adjuster enables or disables manual horizontal keystone adjustment using the slider on the projector Volume Varying levels available Adjusts the volume of the projector s speaker system 82 Setting Options Description __ HDMI Link Device Connections HDMI Link Audio Out Device Power On Link Power Off Link Lock Setting Child Lock Control Panel Lock 83 Adjusts the HDMI Link options allows the projector remote to control HDMI connected devices that support the CEC standard Device Connections lists the devices connected to the HDMI 1 and HDMI 2 ports HDMI Link enables or disables the HDMI Link function Audio Out Device selects whether to output audio from the internal speakers or a connected audio video system Power On Link controls the behavior when the projector or linked device s power is turned on PJ gt Device or Bidirectional turns the linked device on when the projector is turned on Device gt PJ or Bidirectional turns the projector on when the linked device is turned on Power Off Link controls whether linked devices are turned off when the projector is turned off Controls projector button locking to secure the projector Child Lock locks the power button Control Panel Lock locks all buttons except the power button Setting Options Description __ Projection Front Selects the way the projector faces the screen so the i
132. on 2 Select the Network menu and press Enter 3 Select Network Configuration and press Enter 43 4 Select the Security menu and press Enter Security Passphrase 5 Select the security settings as necessary to match your network settings 6 When you finish selecting settings select Complete and follow the on screen instructions to save your settings and exit the menus Wireless Security Menu Settings Parent topic Wireless Network Projection Related references Projector Network Settings Network Menu Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to Setting Options Description Security WPA2 PSK and WPA types Selects the type of security used available on the wireless network Passphrase Various keys from 8 to 32 For WPA or WPA2 PSK security characters selects the pre shared key used on the network Parent topic Setting Up Wireless Network Security 44 Using Basic Projector Features Follow the instructions in these sections to use your projector s basic features Turning On the Projector Turning Off the Projector Viewing 3D Images Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image With the Zoom Ring Focusing the Image Using the Focus Ring Remote Control Operation Selecting an Image Source Projection Mode
133. on and frequency limit If necessary select a different display resolution for your computer See your computer manual for details Parent topic Solving Image or Sound Problems Related references Projector Setup Settings Extended Menu Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears try the following solutions e Press the Aspect button on the remote control to select a different image aspect ratio e Check your computer display settings to disable dual display and set the resolution within the projector s limits Gee your computer manual for details e Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in See your software help for details Parent topic Solving Image or Sound Problems Related references Supported Video Display Formats Input Signal Settings Signal Menu Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular try the following solutions e Place the projector directly in front of the center of the screen facing it squarely if possible 111 e If you adjusted the projector height using the projector feet press the keystone buttons on the projector to adjust the image shape e Turn on automatic keystone adjustments using the projector s menus e Adjust the position of the projector s horizontal keystone slider P
134. on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is n
135. ons Projector Parts Control Panel Source 5 a Oe ET 5 EJ fF Lamp Temp Power button light Source button cycles through the list of sources Menu button accesses projector menu system Enter button selects options Esc button cancels exits functions Vertical keystone adjustment buttons adjust screen shape and arrow buttons Volume control buttons horizontal keystone adjustment buttons adjusts screen shape and arrow buttons N Oo fF W DP 8 Temp light 9 Lamp light 10 Status light Parent topic Projector Part Locations 18 Projector Parts Remote Control Link Menu Mute 2D 3D color Mode Fast Fine 3D Format RGBCMY Auto Iris Slideshow Pattern Aspect AV Mute EPSON Power button Source buttons HDMI Link button displays the settings menu for HDMI Link Link Menu button displays the main menu of the connected device and control buttons control playback and other features of connected A V devices that support the HDMI CEC standard 19 ON DOO A 9 10 11 12 13 14 15 16 17 18 19 20 21 Menu button accesses projector menu system Arrow buttons move through on screen options User button customizable for different functions Color Mode button selects display modes 2D 3D button cycles between 2D and 3D modes 3D Format button changes the 3D format Slideshow button changes to the image source connected to th
136. or Always use the original packaging or equivalent when shipping Make sure your projector box included all of these parts Projector Remote control Remote control batteries two AA alkaline Power cord A OU N gt 11 5 Projector documentation CD Parent topic Projector Features Additional Components Depending on how you plan to use the projector you may need to obtain the following additional components To receive a component video signal you need a D sub 15 pin component to VGA video cable You can purchase one from Epson or an authorized Epson reseller To receive an HDMI signal you need a compatible HDMI cable You can purchase one from Epson or an authorized Epson reseller To receive an HDMI signal via MHL you need an MHL compatible device an MHL cable or an HDMI cable and an MHL adapter compatible with your device Devices with an integrated MHL connector may not require a cable To receive and view a 3D signal you need a compatible HDMI cable and active shutter 3D glasses You can purchase them from Epson or an authorized Epson reseller If your video source is a 3D Blu ray disc you also need a Blu ray player that supports 3D playback See your local computer or electronics dealer for purchase information Note To connect a Mac that includes only a Mini DisplayPort Thunderbolt port or Mini DVI port for video output you need to obtain an adapter that allows you to connect to the projector s
137. or 0800 89 1131 in the UK or 0031 11 1129 in Japan toll free The direct dial number is 512 462 4118 Advanced Micro Devices Inc 161 29K Support Products Mail Stop 573 5900 E Ben White Blvd Austin TX 78741 800 292 9263 5 C W Sandmann Copyright C 1993 C W Sandmann This file may be freely distributed as long as the author s name remains 6 Eric Backus C Copyright 1992 Eric Backus This software may be used freely so long as this copyright notice is left intact There is no warrantee on this software 7 Sun Microsystems Copyright C 1993 by Sun Microsystems Inc All rights reserved Developed at SunPro a Sun Microsystems Inc business Permission to use copy modify and distribute this software is freely granted provided that this notice is preserved 8 Hewlett Packard c Copyright 1986 HEWLETT PACKARD COMPANY To anyone who acknowledges that this file is provided AS IS without any express or implied warranty permission to use copy modify and distribute this file for any purpose is hereby granted without fee provided that the above copyright notice and this notice appears in all copies and that the name of Hewlett Packard Company not be used in advertising or publicity pertaining to distribution of the software without specific written prior permission Hewlett Packard Company makes no representations about the suitability of this software for any purpose 9 Hans Peter Nilsson Copyright
138. other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 17 S L Moshier Author S L Moshier Copyright c 1984 2000 S L Moshier Permission to use copy modify and distribute this software for any purpose without fee is hereby granted provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software THIS SOFTWARE IS BEING PROVIDED AS IS WITHOUT ANY EXPRESS OR IMPLIED WARRANTY IN PARTICULAR THE AUTHOR MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE 18 Citrus Project Copyright c 1999 Citrus
139. ouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to signa copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker lt signature of Ty Coon gt 1 April 1989 Ty Coon President of Vice 139 This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License GNU LGPL This projector product includes the open source software programs which apply the GNU Lesser General Public License Version 2 or later version LGPL Programs We provide the source code of the LGPL Programs until five 5 years after the discontinuation of same model of this projector product If you desire to receive the source code of the LGPL Programs please see the EPSON Projector Contact List in the User s Guide and contact the customer support of your region These LGPL Programs are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more d
140. p and Installation Options Projection Distance Parent topic Setting Up the Projector Related tasks Changing the Projection Mode Using the Menus Projector Setup and Installation Options You can set up or install your projector in the following ways Front 21 Rear Ceiling Sz H Wherever you set up the projector make sure to position it squarely in front of the center of the screen not at an angle if possible If you project from the ceiling or from the rear be sure to select the correct Projection option in the projector s menu system Parent topic Projector Placement Related references Projector Feature Settings Settings Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image The image size increases the farther the projector is from the screen but can vary depending on the zoom factor aspect ratio and other settings Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image Conversion figures may have been rounded up or down You can also use the projector Throw Distance Calculator at epson com support U S or epson ca support Canada 23 16 9 Aspect Ratio Image or Screen Screen or image size Projection distance Hache I a 2 80 inches 203 cm 85 to 103 inches remy lever Ooo 100 inches 254 cm 107 to 129 E pese eeen ooo 150
141. projector and your video device If you connected long cables try connecting shorter cables If you are using the ECO Power Consumption setting try selecting Normal in the projector s menus Note At high altitudes or locations subject to high temperatures the image may become darker and you may not be able to adjust the Power Consumption setting Position the projector close enough to the screen If the image has been progressively darkening you may need to replace the projector lamp soon Parent topic Solving Image or Sound Problems Related concepts Projector Lamp Maintenance Related references Image Quality Settings Image Menu Projector Setup Settings Extended Menu Solutions When a 3D Image Does Not Display Correctly If a 3D image does not display correctly try the following solutions Press the 2D 3D button on the remote control to switch to 3D mode if necessary You can also activate 3D mode by setting the 3D Display setting on the Signal menu to On Make sure your video device and media are both 3D compatible Refer to the documentation that came with your video device for more information Make sure you are using an HDMI cable that supports 3D signals Make sure you selected the correct 3D Format setting on the Signal menu Normally this should be set to Auto but in some cases you may need to select a different setting to match the 3D signal from your video device Make sure you are using RF 3D active shutter g
142. r cord 2 Allow the projector lamp to cool down for at least one hour 3 Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover Warning If the lamp is broken glass fragments may be loose inside the lamp chamber Be careful removing any broken glass to avoid injury If the projector is installed on the ceiling stand to the side of the lamp cover and not underneath it pieces of glass could fall into your eyes or mouth when you open the lamp cover 98 4 Slide the lamp cover out and lift it off 99 6 Grasp the raised section of the lamp and gently pull the lamp out of the projector Note The lamp s in this product contain mercury Please consult your state and local regulations regarding disposal or recycling Do not put in the trash 7 Gently insert the new lamp into the projector If it does not fit easily make sure it is facing the right way a gt Ze a Caution Do not touch any glass on the lamp assembly to avoid premature lamp failure 100 8 Pushin the lamp firmly and tighten the screws to secure it Note Be sure the lamp cover is securely installed or the lamp will not come on Reset the lamp timer to zero to keep track of the new lamp s usage 101 Parent topic Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector s lamp to clear
143. r gt This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to signa copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker lt signature of Ty Coon gt 1 April 1990 Ty Coon President of Vice That s all there is to it 148 BSD License Berkeley Software Distribution License This projector product includes the open source software program University of California Berkeley License Berkeley Software Distribution License which applies the terms and conditions provided b
144. ram In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above ona medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the
145. resized to fit automatically Your computer s monitor port or video card refresh rate vertical frequency must be compatible with the projector See your computer or video card manual for details The table here lists the compatible refresh rate and resolution for each compatible video display format e C 00 600SSSCSC S S WXGA eo T 0 i Te C SSS S 80 w80SSSSC 123 SXGA C eo 82880 1024 O wxease fod x90 Composite video TV NTSC C TV PAL TV SECAM NTSC4 43 C TV M PAD e TV N PAL TV PAL60 C Component video SDTV 480 Odes SDTV 480p fds HDMI input signals vea o do eoo SDTV 480i 480p Ode x80 MHL input signals V V 124 Display format Refresh rate in Hz Resolution in pixels SDTV 4801 480p C SDTV 576i 576p 720 x 576 HDTV 720p 50 60 1280 x 720 HDTV 1080i 50 60 1920 x 1080 HDTV 1080p 24 30 1920 x 1080 HDMI 3D Signals Display format Refresh rate in Hz Resolution in pixels 3D formats HDTV750p 720p 50 60 1280 x 720 Frame Packing Side by Side Top and Bottom HDTV1125i 1080i 50 60 1920 x 1080 Side by Side HDTV1125p 1080p 50 60 1920 x 1080 Side by Side 24 1920 x 1080 Frame Packing Top and Bottom MHL 3D Signals Display format Refresh rate in Hz Resolution in pixels 3D formats HDTV750p 720p 50 60 1280 x 720 Side by Side Top and Bottom HDTV1125i 1080 50 60 1920 x 1080 Side by Side HDTV1125p 1080p 50 60 1920 x 1080 a 24
146. risk of satisfactory quality performance accuracy and effort is with the user libpng versions 0 97 January 1998 through 1 0 6 March 20 2000 are Copyright 1998 1999 Glenn Randers Pehrson and are distributed according to the same disclaimer and license as libpng 0 96 with the following individuals added to the list of Contributing Authors Tom Lane Glenn Randers Pehrson Willem van Schaik 152 libpng versions 0 89 June 1996 through 0 96 May 1997 are Copyright c 1996 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng 0 88 with the following individuals added to the list of Contributing Authors John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0 5 May 1995 through 0 88 January 1996 are Copyright c 1995 1996 Guy Eric Schalnat Group 42 Inc For the purposes of this copyright and license Contributing Authors is defined as the following set of individuals Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied AS IS The Contributing Authors and Group 42 Inc disclaim all warranties expressed or implied including without limitation the warranties of merchantability and of fitness for any purpose The Contributing Authors and Group 42 Inc assume no liability for direct indirect incidental special exemplary or consequential damages which may result from th
147. rofile Kernel Copyright C 2000 2003 by Embedded and Real Time Systems Laboratory Toyohashi Univ of Technology JAPAN Copyright C 2004 by Embedded and Real Time Systems Laboratory Graduate School of Information Science Nagoya Univ JAPAN The above copyright holder limited to cases in which one satisfies conditions 1 4 below or the conditions described in Version 2 of the GNU Public License officially announced by the Free Software Foundation consents to the use reproduction alteration and redistribution hereafter called utilization of this software this software includes alterations likewise below without compensation 1 When this software is utilized in the form of source code the above copyright declaration these conditions of utilization and the following stipulation of no guarantee shall be included in unchanged form inside the source code 175 2 When this software is redistributed in a form in which it can be used in the development of other software library form etc the above copyright display these terms of utilization and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution user s manual etc 3 When this software is redistributed in a form in which it cannot be used in the development of other software embedded in devices etc one of the following conditions shall be satisfied a The above copyright display these terms of utilization
148. roject with confidence For details see the warranty brochure that came with your projector 13 In addition Epson offers free Extra Care Home Service In the unlikely event of an equipment failure you won t have to wait for your unit to be repaired Instead Epson will ship you a replacement unit anywhere in the United States Canada or Puerto Rico See the Extra Care Home Service brochure for details Register your product online using the projector CD or at this site epson com webreg Registering also lets you receive special updates on new accessories products and services Parent topic Projector Features Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation e Warnings must be followed carefully to avoid bodily injury e Cautions must be observed to avoid damage to your equipment e Notes contain important information about your projector e Tips contain additional projection information Parent topic Introduction to Your Projector Where to Go for Additional Information Need quick help on using your projector Here s where to look for help epson com support U S or epson ca support Canada View FAQs frequently asked questions and e mail your questions to Epson technical support 24 hours a day e If you still need help after checking this manual and the sources listed above you can use the Epson PrivateLine Support service to get help fast For details see Where to
149. rrection in your projector s Settings menu your projector automatically corrects vertical keystone effects when you reposition the projector Correcting Image Shape with the Horizontal Keystone Slider Correcting Image Shape with the Keystone Buttons Parent topic Using Basic Projector Features Correcting Image Shape with the Horizontal Keystone Slider You can use the projector s horizontal keystone slider to correct the shape of an image that is unevenly rectangular horizontally such as when the projector is placed to the side of the projection area 54 1 Turn on the projector and display an image Note You can display a pattern to aid in adjusting the projected image using the Settings menu 2 Adjust the slider until the image is evenly rectangular After correction your image is slightly smaller Parent topic Image Shape Related references Projector Feature Settings Settings Menu Correcting Image Shape with the Keystone Buttons You can use the projector s keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides 1 Turn on the projector and display an image Note You can display a pattern to aid in adjusting the projected image using the Settings menu 55 2 Press one of these keystone buttons on the control panel to display the Keystone adjustment screen 3 Press a keystone button on the projector s control panel to adjust the image
150. s Image Aspect Ratio Color Mode Controlling the Volume with the Volume Buttons Projecting a Slide Show Turning On the Projector Turn on the computer or video equipment you want to use before you turn on the projector so it can display the image source 45 1 Open the projector s lens cover eo T 2 Connect the power cord to the projector s power inlet 3 Plug the power cord into an electrical outlet Note With Direct Power On turned on the projector turns on as soon as you plug it in The projector s power light turns blue This indicates that the projector is receiving power 4 Press the power button on the projector or the remote control to turn on the projector 46 The projector beeps and the Status light flashes blue as the projector warms up Once the projector is warmed up the Status light stops flashing and turns blue Warning Never look into the projector lens when the lamp is on This can damage your eyes and is especially dangerous for children If you do not see a projected image right away try the following e Verify the lens cover is open all the way e Turn on the connected computer or video device Insert a DVD or other video media and press the play button if necessary e Press the button for the video source on the remote control Parent topic Using Basic Projector Features Related references Projector Setup Settings Extended Menu Turning Off the Projector Before turning of
151. s buttons may be locked for security Unlock the buttons or use the remote control to turn on the projector e The power cord may be defective Disconnect the cord and contact Epson e Ifthe projector s lamp shuts off unexpectedly it may have entered sleep mode after a period of inactivity Begin a presentation to wake the projector Ifthe projector s lamp shuts off the Status light is flashing blue and the Temp light is orange the projector has overheated and shut off Check the solutions for this light status Ifthe power button on the remote control does not turn on the projector check its batteries and make sure the Remote Receiver setting is turned on in the projector s menu if available Parent topic Solving Projector or Remote Control Operation Problems Related references Where to Get Help Projector Light Status Projector Feature Settings Settings Menu Related tasks Unlocking the Projector s Buttons Replacing the Remote Control Batteries 116 Solutions to Problems with the Remote Control If the projector does not respond to remote control commands try the following solutions e Check that the remote control batteries are installed correctly and have power If necessary replace the batteries e Make sure you are operating the remote control within the reception angle and range of the projector e Make sure the projector is not warming up or shutting down e Check to see if a button on the remote control i
152. s service is available for the duration of your warranty period You may also speak with a projector support specialist by dialing 562 276 4394 U S or 905 709 3839 Canada Support hours are 6 AM to 8 PM Pacific Time Monday through Friday and 7 AM to 4 PM Pacific Time Saturday Days and hours of support are subject to change without notice Toll or long distance charges may apply Before you call have the following information ready e Product name Product serial number located on the bottom or rear of the projector or in the menu system e Proof of purchase such as a store receipt and date of purchase e Computer or video configuration e Description of the problem Purchase Supplies and Accessories You can purchase screens other optional accessories and replacement parts from an Epson authorized reseller To find the nearest reseller call 800 GO EPSON 800 463 7766 Or you can purchase online at epsonstore com U S sales or epson ca Canadian sales To purchase a replacement remote control call 562 276 4394 U S or 905 709 3839 for dealer referral in Canada Parent topic Solving Problems 118 Technical Specifications These sections list the technical specifications of your projector General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specificatio
153. s stuck down causing it to enter sleep mode Release the button to wake the remote control up Strong fluorescent lighting direct sunlight or infrared device signals may be interfering with the projector s remote receivers Dim the lights or move the projector away from the sun or interfering equipment e If available turn off one of the remote receivers in the projector s menu system or check if all the remote receivers were turned off e If you assigned an ID number to the remote control to operate multiple projectors you may need to check or change the ID setting feature not available with all projectors e If you lose the remote control you can order another one from Epson Parent topic Solving Projector or Remote Control Operation Problems Related references Optional Equipment and Replacement Parts Remote Control Operation Projector Feature Settings Settings Menu Related tasks Replacing the Remote Control Batteries Where to Get Help If you need to contact Epson for technical support services use the following support options Internet Support Visit Epson s support website at epson com support U S or epson ca support Canada for solutions to common problems with your projector You can download utilities and documentation get FAQs and troubleshooting advice or e mail Epson with your questions 117 Speak to a Support Representative To use the Epson PrivateLine Support service call 800 637 7661 Thi
154. s to it Fora library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library 142 Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from sucha program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of th
155. sclaimer in their documentation 3 the name of the copyright holder is not used to endorse products built using this software without specific written DISCLAIMER The redistribution and use of this software with or without changes is allowed without the payment of fees or royalties provided that newlib This projector product includes the open source software program newlib which applies the terms and conditions provided by owner of the copyright to the newlib The newlib are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of newlib programs newlib 1 17 0 License terms of conditions of each program which are provided by owner of the copyright to the newlib are as follows The newlib subdirectory is a collection of software from several sources Each file may have its own copyright license that is embedded in the source file Unless otherwise noted in the body of the source file s the following copyright notices will apply to the contents of the newlib subdirectory 159 1 Red Hat Incorporated Copyright c 1994 2007 Red Hat Inc All rights reserved This copyrighted material is made available to anyone wishing to use modify copy or redistribute it subject to the terms and conditions of the BSD License This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY expressed or implied including the implied warranti
156. sive format e Highly compressed e Above 8192 x 8192 resolution Parent topic Projecting a Slide Show Slideshow Features Your projector s Slideshow feature lets you do the following e Display individual images e Present a slide show of all images in a folder Parent topic Projecting a Slide Show Starting a Slide Show After connecting a USB device to the projector you can switch to the USB input source by pressing Slideshow on the remote control or the Source button on the control panel and start your slide show Note You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter 1 Press the Slideshow button on the projector remote control The Slideshow screen appears 67 5 Do the following as necessary to locate your files If you need to display files inside a subfolder on your device press the arrow buttons to highlight the folder and press the Enter button To move back up a folder level on your device highlight Back to Top and press Enter To view additional images in a folder highlight Next page or Previous page and press Enter Do one of the following to start your slide show e To display an individual image press the arrow buttons to highlight the image and press Enter Press the Esc button to return to the file list screen To display a slide show of all the images in a folder press the arrow buttons to highlight
157. ss Enter to select a Color Mode Parent topic Color Mode Available Color Modes You can set the projector to use these Color Modes depending on the input source you are using 2D Images Best for projecting in a bright room Best for projecting in a room with closed curtains Best for movies projected in a dark room Natural sd Best for projecting in a dark room 3D Images Color Mode 3D Dynamic Best for projecting in a bright room Best for movies projected in a dark room Parent topic Color Mode 64 Turning On Auto Iris In certain color modes you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project 1 Turn on the projector and switch to the image source you want to use 2 Press the Menu button 3 Select the Image menu and press Enter Brightness Contrast Color Saturation Color Mode Dynamic Tint Sharpness Color Temp Advanced Power Consumption Normal Auto Iris Off Reset 4 Select the Auto Iris setting and choose one of the following e High Speed to adjust brightness as soon as the scene changes Normal for standard brightness adjustment Note You can set Auto Iris for each Color Mode that supports the feature 5 Press Menu or Esc to exit the menus Parent topic Color Mode Controlling the Volume with the Volume Buttons You can use the Volume buttons on the projector or the remote control to adjust the volume
158. stributable It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM AT amp T and Mitsubishi Hence arithmetic coding cannot legally be used without obtaining one or more licenses For this reason support for arithmetic coding has been removed from the free JPEG software Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode it is unlikely that very many implementations will support it So far as we are aware there are no patent restrictions on the remaining code The IJG distribution formerly included code to read and write GIF files To avoid entanglement with the Unisys LZW patent GIF reading support has been removed altogether and the GIF writer has been simplified to produce uncompressed GIFs This technique does not use the LZW algorithm the resulting GIF files are larger than usual but are readable by all standard GIF decoders We are required to state that The Graphics Interchange Format c is the Copyright property of CompuServe Incorporated GIF sm is a Service Mark property of CompuServe Incorporated libpng This projector product includes the open source software program libpng which applies the terms and conditions provided by owner of the copyright to the libpng 151 The libpng are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of libpng programs libpng 1 2 49
159. surface Parent topic Projector Maintenance Cleaning the 3D Glasses To remove dust dirt smudges or fingerprints from the glasses use a lint free cloth Note Unplug any charging cables from the glasses before cleaning them b Caution Do not use paper towels or any other abrasive materials to clean the glasses Parent topic Projector Maintenance Cleaning the Projector Case Before cleaning the projector case turn off the projector and unplug the power cord To remove dust or dirt use a soft dry lint free cloth 93 To remove stubborn dirt use a soft cloth moistened with water and mild soap Do not spray liquid directly on the projector Caution Do not use wax alcohol benzene paint thinner or other chemicals to clean the projector case These can damage the case Do not use canned air or the gases may leave a flammable residue Parent topic Projector Maintenance Air Filter and Vent Maintenance Regular filter maintenance is important to maintaining your projector Your Epson projector is designed with an easily accessible user replaceable filter to protect your projector and make regular maintenance simple Filter maintenance intervals will depend on the environment If regular maintenance is not performed your Epson projector will notify you when the temperature inside the projector has reached a high level Do not wait until this warning appears to maintain your projector filter as prolonged exposure to h
160. t port using a 3 5 mm stereo mini jack cable Parent topic Connecting to Video Sources Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for Sound Parent topic Projector Connections Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable Note To connect a Mac that includes only a Mini DisplayPort Thunderbolt port or Mini DVI port for video output you need to obtain an adapter that allows you to connect to the projector s VGA video port Contact Apple for compatible adapter options 1 If necessary disconnect your computer s monitor cable 2 Connect the VGA computer cable to your computer s monitor port 30 3 Connect the other end to a PC port on the projector T a 4 Tighten the screws on the VGA connector Parent topic Connecting to Computer Sources Related tasks Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port you can connect it to the projector using an optional HDMI cable Note To connect a Mac that includes only a Mini DisplayPort Thunderbolt port or Mini DVI port for video output you need to obtain an adapter that allows you to connect to the projector s HDMI port Contact Apple for compa
161. tain and use a shielded equipment interface cable with this device If this equipment has more than one interface connector do not leave cables connected to unused interfaces Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment For Canadian Users CAN ICES 3 B NMB 3 B Parent topic Notices Trademarks EPSON Instant Off and PowerLite are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation 132 Accolade and PrivateLine are registered trademarks Duet and SizeWise are trademarks and Epson Store and Extra Care are service marks of Epson America Inc Mac and Mac OS are trademarks of Apple Inc registered in the U S and other countries HDMI and High Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC Mom General Notice Other product names used herein are for identification purposes only and may be trademarks of their respective owners Epson disclaims any and all rights in those marks EPSON EXCEED YOUR VISION Parent topic Notices Open Source Software License GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version GPL Programs We provide the source code of the GPL Programs until five 5 years after the discontinuation of same model of th
162. ted WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE 23 Intel i960 Copyright c 1993 Intel Corporation Intel hereby grants you permission to copy modify and distribute this software and its documentation Intel grants this permission provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation In addition Intel grants this permission provided that you prominently mark as not part of the original any modifications made to this software or documentation and that the name of Intel Corporation not be used in advertising or publicity pertaining to distribution of the software or the documentation without specific written prior permission Intel Corporation provides this AS IS WITHOUT ANY WARRANTY EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE Intel makes no guarantee or representations regarding the use of or the results of the use of the software and documentation in terms of correctness accuracy reliability currentness or otherwise and you rely on the software documentation and results solely at your own risk INNO EVENT SHALL INTEL BE LIABLE FOR ANY LOSS OF USE LOSS OF BUSINESS LOSS OF PROFITS INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND IN NO EVENT SHALL INTEL S TOTAL LIAB
163. teehot ey E E E E E 117 Technical Specttications osora a ee a re ee eee 119 General Projector Specifications ce ac 20s se oar a aa ashes Sexe eine ava nt eats Sach ba ease aeons 119 Projector Lamp Specifications cececccceeescceeeeeeeeeeeeeeeeeeeenaeesesaaeneeeeaaaeeseaaeaeeseeaaaeesessaeeeeeeeaeaeeen 121 Remote Control Sp6citiCatlons s iiccste icchessteetssiwcnsaeastepeenathed cate eras eveeneen centers adnan edae ee eens 121 Projector Dimension Specifications x eicccccsecdesestysoss ban inleusaswerecwinriatstinsiveesduiedvatgensatelaletdscreesbereelevieens 121 Projector Electrical SOSCHICAIONS naiieieedscunitsigs 3s dtaavoredt mendeds tavenaelay claves tad paeaatnianeadetvncesbesdoriavens 122 Projector Environmental Spe cifications cccccccceessseneeceeeeecesennaeeeeecseceseneeeeeeeeeeeeneeeeeeeeeessnnaaees 122 Projector Safety and Approvals Specifications ccccccccssccecceeecesenneceeeeesceeeeeeeeeeeeeesesnseeeeeesenseaaas 123 Supported Video Display Format c sscccccccsssssescececeeecsecenaeeeeecssccseeeeeeeeeeseecneseeeeeeeesennnnaeeeeeesess 123 NOCES scccceeascedicetts ais cecies val a aaa araa a a a aE tueuuvbaieeecudvasieeestOageccneses 126 FROG CII peia pa ie ae o eaaa a te REAK aA ob a teas aAa Ea VET A AA CANTER aeaa sa 126 Important Safety Information 25 52 tele ec de Senate teens at leitcetss eeeuh sn cesus iene ea dae cada deme andere nennen nennen neee 126 Important Safety INSUUCHOMG 15 52
164. the Slideshow option at the bottom of the screen and press Enter Note If any file names are longer than 8 characters or include unsupported symbols the file names may be shortened or changed only in the screen display While projecting use the following commands to control the display as necessary e To rotate a displayed image press the up or down arrow button To move to the next or previous image press the left or right arrow button To stop the display follow the on screen instructions or press the Esc button Slideshow Display Options Parent topic Projecting a Slide Show 68 Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the projector s Slideshow feature 4 Option Display Setting Display Order J T Date Order Sort Order Preca mmoc Slideshow Setup Continuous Play L OF i OTF Screen Switching Time Terenas Effect Ne a Tr Dissolve i Random py e Seung opions pescnipion Continuous Play Ons Displays a slide show continuously Of Displays a slide show one time through Screen Switching INO Does not display the next file automatically Hime 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically high resolution images may switch at a slightly slower rate 69 Setting Options Description O Tr
165. this you must install the Epson 802 11b g n wireless LAN module and then set up your projector and computer for wireless projection Note The wireless LAN module is not included with your projector You can connect the projector to your wireless network by configuring the connection manually using the projector s Network menus After installing the module and setting up the projector install the network software You can download the latest software and documentation from the Epson web site Use the following software and documentation to set up control and monitor wireless projection e EasyMP Network Projection software sets up your computer for wireless network projection Go to epson com support U S or epson ca support Canada and select your projector e Projection from iOS or Android devices with the wireless LAN module and free Epson iProjection app visit epson com projectorapp U S or epson ca projectorapp Canada for more information Installing the Wireless LAN Module Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Selecting Wireless Network Settings in Mac OS X Setting Up Wireless Network Security Related references Projector Network Settings Network Menu Installing the Wireless LAN Module To use the projector over a wireless network install the Epson 802 11b g n wireless LAN module in the projector Do not install any other type of wireless module Insert the
166. tible adapter options Older Mac computers 2009 and earlier may not support audio through the HDMI port 1 Connect the HDMI cable to your computer s HDMI output port 2 Connect the other end to one of the projector s HDMI ports f a oe E ES Note The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers 31 Parent topic Connecting to Computer Sources Related tasks Connecting to External Speakers Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector s HDMI port you can still play sound through the projector s speaker system Connect an optional stereo mini jack adapter cable with one 3 5 mm mini plug and two RCA plugs 1 Connect the audio cable to your laptop s headphone or audio out jack or your desktop s speaker or audio out port 2 Connect the other end to the projector s Audio ports pem ne E Parent topic Connecting to Computer Sources Connecting to External Speakers To enhance the sound from your presentation you can connect the projector to external self powered speakers You can control the volume using the projector s remote control Note You can also connect the projector to an amplifier with speakers Note The projector s built in speaker system is disabled when you
167. tion It is recommended that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games The suggested breaks are at least 5 to 15 minutes after every 30 to 60 minutes of stereoscopic 3D content viewing Based on the guidelines issued by the 3D Consortium revised December 10 2008 The length and frequency of necessary breaks will vary from person to person If you experience any discomfort you should immediately stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends consult a heath care provider physician if necessary Due to the possible impact on vision development viewers of 3D video images should be age 6 or older Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest e Maintain a distance from the screen of at least three times the screen height when viewing 3D images The recommended viewing distance for an 80 inch screen is at least 10 feet 3 m and at least 12 feet 3 6 m for a 100 inch screen Also we recommended using a screen size less than 120 inches Viewing any closer than the recommended viewing distance or on a screen larger than recommended may result in eye fatigue e Viewing 3D content may cause dizziness and disorientation for some viewers Therefore to avoid injury do not place your projector or screen near open stairwells balcon
168. tion may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED I
169. titude Mode If the problem persists unplug the projector and contact Epson for help Off Flashing blue Orange Off Lamp has a problem e Check to see if the lamp is burned out broken or installed incorrectly Reseat or replace the lamp as necessary Clean or replace the air filter If operating the projector at high altitude turn on High Altitude Mode If the problem persists unplug the projector and contact Epson for help 107 Power light Status light Lamp light Temp light Status and solution Flashing blue Varies Flashing Off Replace the lamp soon to avoid orange damage Do not continue using the projector Off Flashing blue Off Flashing A fan or sensor has a problem Turn orange the projector off unplug it and contact Epson for help Flashing blue Flashing Flashing Auto Iris error Turn the projector off orange orange unplug it and contact Epson for help Flashing blue Orange Orange Power error ballast Turn the projector off ache it and contact Epson for help Blue Flashing Internal projector error Turn the orange projector off unplug it and contact Epson for help Note If the lights display a pattern not listed in the table above turn the projector off unplug it and contact Epson for help Parent topic Solving Problems Related references Where to Get Help Related tasks Cleaning the Air Filter and Vents Replacing the Lamp Replacing the Air Filter Solving Image or Sound
170. tor where it may be exposed to rain water or excessive humidity Do not use or store the projector where it may be exposed to smoke steam corrosive gases excessive dust vibration or shock Do not use the projector where flammable or explosive gases may be present Do not use or store the projector or remote control in a hot location such as near a heater in direct sunlight or in a closed vehicle If you use the projector in a country other than where you purchased it use the correct power cord for that country Do not stand on the projector or place heavy objects on it Do not use the projector outside of the required temperature range of 41 to 95 F 5 to 35 C Doing so may cause an unstable display and could lead to projector damage Do not use or store the projector where it may be exposed to sudden changes in temperature 128 Do not store the projector outside of the required temperature range of 14 to 140 F 10 to 60 C or in direct sunlight for long periods of time Doing so may cause damage to the case Do not place anything that can become warped or damaged by heat near the exhaust vents Do not bring your hands or face close to the vents while projection is in progress Do not bring your face close to the projector while it is in use Before you move the projector make sure its power is turned off the plug is disconnected from the outlet and all cables are disconnected Never try to remove the lamp im
171. tructions when setting up and using the projector Do not look into the lens when the projector is on The bright light can damage your eyes Avoid standing in front of the projector so the bright light does not shine into your eyes Do not place the projector on an unstable cart stand or table Do not operate the projector on its side or while tilted to one side Do not tilt the projector more than 12 forward or back If the projector is mounted on a ceiling or wall it should be installed by qualified technicians using mounting hardware designed for use with this projector When installing or adjusting a ceiling or wall mount do not use adhesives to prevent the screws from loosening and do not use oils or lubricants This may cause the projector case to crack and the projector to fall from its ceiling mount This could cause serious injury to anyone under the mount and could damage the projector Do not use the projector near water sources of heat high voltage electrical wires or sources of magnetic fields Use the type of power source indicated on the projector Use of a different power source may result in fire or electric shock If you are not sure of the power available consult your dealer or power company Place the projector near a wall outlet where the plug can be easily unplugged Take the following precautions when handling the plug Do not hold the plug with wet hands Do not insert the plug into a dusty outlet Insert
172. u can use this software for whatever you want You don t have to pay us 3 You may not pretend that you wrote this software If you use it in a program you must acknowledge somewhere in your documentation that you ve used the IJG code In legalese The authors make NO WARRANTY or representation either express or implied with respect to this software its quality accuracy merchantability or fitness for a particular purpose This software is provided AS IS and you its user assume the entire risk as to its quality and accuracy This software is copyright c 1991 1998 Thomas G Lane All Rights Reserved except as specified below Permission is hereby granted to use copy modify and distribute this software or portions thereof for any purpose without fee subject to these conditions 1 If any part of the source code for this software is distributed then this README file must be included with this copyright and no warranty notice unaltered and any additions deletions or changes to the original files must be clearly indicated in accompanying documentation 2 If only executable code is distributed then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group 150 3 Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences the authors accept NO LIABILITY for damages of any kind These
173. und lt one line to give the program s name and a brief idea of what it does gt Copyright c lt year gt lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright c year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be m
174. ut sources by viewing the Info menu However you cannot change any settings in the menu The information displayed depends on the currently selected input source image Lamp Hours OH Source Component Input Signal RGB Resolution 1920 x 1080 Scan Mode Interlace Refresh Rate 0 00 Hz Extended 3D Format Frame Packing Sync Info SGNN 00000 Deep Color 0 bit Status SESS Serial Number ABCD11122334 Version V100 Event ID 0434 02FF 0433 Note The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours Available settings depend on the current input source Information item Lamp Hours Displays the number of hours H the lamp has been used in each Power Consumption mode if the information is displayed in yellow obtain a genuine Epson replacement lamp soon Displays the name of the port to which the current input source is connected Displays the input signal type setting of the current input source aD Format Displays the 3D format ofthe currentinput source Displays the resolution of the current input source 88 Information item Deep Color Displays Deep Color information Video Signal Displays the video signal format of the current input source sea a Displays information about projector problems that may be needed by a service technician Event D Displays the application errorlog Event ID Code List Parent topic Adjusting the Menu Settings Related references Optional Equipm
175. ware If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outsi
176. wireless LAN module into the USB Type A port 38 The light on the wireless LAN module turns on when the module is installed and operating The light flashes when the module is communicating over the network Parent topic Wireless Network Projection Selecting Wireless Network Settings Manually Before you can project from your wireless network you must select the network settings for the projector using its menu system 1 Turn on the projector 2 Press the Menu button 39 3 Select the Network menu and press Enter Net Info Wireless LAN Network Configuration 4 Select Network Configuration and press Enter 5 Select the Basic menu and press Enter Projector Name 6 Select the Projector Name setting and enter a name up to 16 alphanumeric characters long to identify the projector over the network Note Use the displayed keyboard to enter the name Press the arrow buttons on the remote control to highlight characters and press Enter to select them 40 7 Select the Wireless LAN menu and press Enter Connection Mode Quick WirelessLAN Channel 1ch EON Search Access Point IP Settings SSID Display On IP Address Display On 8 Select the settings on the Wireless LAN menu as necessary for your network Note Some items may be unavailable if Quick or Advanced connection mode is selected 9 When you finish selecting settings select Complete and follow the on screen instructions to
177. y owner of the copyright to the BSD License The BSD License are WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE List of BSD License programs busybox 1 13 4 License terms of conditions of each program which are provided by owner of the copyright to the BSD License are as follows Copyright c The Regents of the University of California All rights reserved This code is derived from software contributed to Berkeley by Kenneth Almquist Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
178. you can change the Language setting 1 Turn on the projector 2 Press the Menu button 52 3 Select the Extended menu and press Enter Display Input Signal Language English Reset Extended 4 Select the Language setting and press Enter 5 Select the language you want to use and press Enter 6 Press Menu or Esc to exit the menus Parent topic Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface and the image is too high or low you can adjust the image height using the projector s adjustable feet 1 Turn on the projector and display an image 2 To adjust the front foot pull up on the foot release lever and lift the front of the projector 53 The foot extends from the projector 3 Release the lever to lock the foot 4 Ifthe image is tilted rotate the rear feet to adjust their height If the projected image is unevenly rectangular you need to adjust the image shape Parent topic Using Basic Projector Features Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level If you place the projector at an angle to the screen or tilted up or down or off to the side you may need to correct the image shape for the best display quality When you turn on automatic keystone co
179. zed Epson servicer Warning Before cleaning any part of the projector turn it off and unplug the power cord Never open any cover on the projector except as specifically explained in this manual Dangerous electrical voltages in the projector can injure you severely Warning Do not try to service this product yourself except as specifically explained in this manual Refer all other servicing to qualified servicers Cleaning the Lens Cleaning the 3D Glasses Cleaning the Projector Case Air Filter and Vent Maintenance Projector Lamp Maintenance Replacing the Remote Control Batteries Parent topic Maintaining and Transporting the Projector Related references Where to Get Help Cleaning the Lens Clean the projector s lens periodically or whenever you notice dust or smudges on the surface To remove dust or smudges gently wipe the lens with lens cleaning paper 92 To remove stubborn smudges moisten a soft lint free cloth with lens cleaner and gently wipe the lens Do not spray any liquid directly on the lens Warning Do not use a lens cleaner that contains flammable gas The high heat generated by the projector lamp may cause a fire Caution Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens to any impacts you may damage it Do not use canned air or the gases may leave a residue Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens

Epson PowerLite Home Cinema 2000

Contents

Download Pdf Manuals

Related Search

Related Contents