Panasonic TX-L19X5B 19" Full HD Black LED TV
Contents
1. p AAC m4a WMA wma WMA lossless WMA Pro are not supported Container File extension Video codec Audio codec AVCHD mts H 264 BP MP HP Dolby Digital AVI ai H 264 BP MP HP MP3 MPEG1 Layer1 2 Dolby Digital AAC MPEG 4 HE AAC ASF pN Windows Media Video v9 VC 1 Windows Media Audio v8 MP3 MKV ik H 264 BP MP HP MP3 MPEG1 Layer1 2 Dolby Digital AAC HE AAC mp4 MP4 mdy H 264 BP MP HP MP3 AAC HE ACC Ts ts H 264 BP MP HP Dolby Digital Dolby Digital Plus MP3 Alife MPEG 2 AAC HE AAC PS mpg MPEG 1 MPEG 2 Dolby Digital MPEG1 Layer1 2 AAC DVD mpeg LPCM FLV oe H 264 BP MP HP MP3 AAC HE AAC H 264 BP MP HP 3GPP 3gp PEGA AAC HE AAC Note e Some files may not be played back even if they fulfill these conditions Do not use two byte characters or other special codes for data e The card may become unusable with this TV if the file or folder names are changed 26 LICENSE This product incorporates the following software or technology 1 the software based in part on the work of the Independent JPEG Group 2 the software developed by the Free Type Project Dolby DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are DIGITALPLUS trademarks of Dolby Laboratories Ri ri im j HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in United States and other countries HIGH2. Select O EXIT e RETURN Access Press MENU button and AY buttons to select Sound the Sound menu will be displayed Press OK button to enter Sound menu Press A Y buttons to select item desired Press lt P buttons to adjust value Press BACK RETURN button to return the previous menu Press EXIT button to exit menu operation UAWN Ov e Selects the basic sound mode Music Speech Music Optimise sound quality for watching music videos etc Speech Optimise sound quality for watching news drama etc e Increases or decreases level to enhance or minimise lower deeper sound output 14 14 Treble e Increases or decreases level to enhance or minimise sharper higher sound output 14 14 Balance e Adjusts volume level of right and left speakers 50 50 Headphone Volume e Adjusts the volume of the headphones 0 100 e Enriches expanding and deepening the sound quality e Selects multiplex sound mode if available e For analogue mode only SPDIF Selection e SPDIF A standard audio transfer file format e Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal Auto Outputs Dolby Digital if available or default audio source to DIGITAL AUDIO OUT terminal e If the audio is recorded in Dolby Digital the output from DIGITAL AUDIO OUT terminal will be Dolby Digital PCM Outputs PCM format to DIGITAL AUDIO
3. Panasonic Model No TX L19X5B TX L24X5B Operating Instructions LCD Television VIESA Thank you for purchasing this Panasonic product Please read these instructions carefully before operating this product and retain them for future reference The images shown in this manual are for illustrative purposes only Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance English SAFETY PRECAUTIONS wissscsissstsssccvswesssiscascscscnscssedescsassisecdsssecstacsanesisisuisnanssacensascsssseestvesees D EADAE ener eee eee een eee te nee er nS RESP rena eee ne eyo re nS ee a eT ee ee eee ee one 3 CAUTION ESTESE AEA PE AE ENANA EAE IEE IAA E IAEA N AEE MEAE EA AIE EEA E A Mai 6 aintenance OOOO OOS OOS HOO HHH OH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHSHHHSHSHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOHOOEOE Displ Cabinet Pedestal i play panel Cabinet Pedestalessissonssiinnin eeno a ai NEDEN RA Aana S akari 6 MS PNI aena e E AE A O E 6 Standard Accessories sscscscscsoscscscsososososososocososocososocosososososocososocosscocossssescsssesesssesesesese O Attaching tne PEC OSEAN cssisccviccecesscsuivsscsivesixesvabusetisceastecenssiiesstersescavvestintsintiaiesteeuvaeas 7 installing Poda SAN apinn EN E en verdes Ques T E 7 Uninstalling POS A igs tresses escececssinessasedcnscactass not ii a i 7 Wall hanging Not supplied casei ccssszacssesssacsavetaseanecksnssc
4. 4 Channel Scan lt On Screen gt Initial Setup Channel Scan First please connect aerial Start channel scan now If you skip this step the channel scan could be performed in Menu Skip Scan 5 Search for channels lt On Screen gt Initial Setup Channel Scan The channel scan may take a while to complete Status Scanning Analogue Channels 2 Digital Channels 0 6 Initial setup completed lt On Screen gt Initial Setup Complete Congratulations Completed Initial Setup Please press OK to exit the wizard Initial Setup lt Remote Operation gt MUTE TEXT STTL EXIT EXIT Select lt Remote Operation gt MUTE TEXT STTL EXIT x PER e Cancel BACK a U e lt Remote Operation gt w MUTE TEXT STTL EXIT Back BACK 15 16 On Screen Display Picture Picture Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance P NR Screen Display Select TO EXIT JX RETURN Access 1 Press MENU button and A Y buttons to select Picture the Picture menu will be displayed Press OK button to enter Picture menu Press A Y buttons to select item desired Press lt P buttons to adjust value Press BACK RETURN button to return the previous menu 6 Press EXIT button to exit menu operation Viewing Mode Basic picture mode Dynamic Normal Cinema User Game wu WN Dynamic e Provides enhanced pictur
5. Fine Tuning Fine tunes analogue channels manually when the reception is poor Clean Channel List Cleans all the current TV channels Preferred Audio 1 Preferred Audio 2 Selects the first and second preferred language for DVB multi audio depending on the broadcaster Preferred Subtitle 1 Preferred Subtitle 2 Selects the first and second preferred language for DVB subtitles depending on the broadcaster Display Settings Teletext Character Set Selects teletext language e Only for Ireland region Banner Display Timeout Sets how long the Information banner stays on screen Common Interface Uses include to watch encrypted channels HDMI Control First please connect your TV to a HDMI compliant device TV will be turned on and display the previous viewed input source when the connected HDMI compliant device is switched on Connected HDMI compliant device will be switched to standby when TV turns to standby mode Sets network settings for your TV Configuration Internet Connection Selects On to enable network settings Information Displays information of network connection IP Setting Detects IP automatically or sets IP manually Connection Test Displays the network signal strength Interaction channel Interaction channel provides an extension of broadcast interactive services via broadcast transmission or IP connection Selects On to enable Interaction channel fu
6. DEFINITION MULTIMEDIA INTERFACE HD TV DDTV HIGH DEFINITION TELEVISION The HD TV Logo is a trademark of DIGITALEUROPE FreeView HD The Freeview HD words and logos are trade marks of DTV Services Ltd and are used x under licence DTV Services Ltd Freeview D Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier f
7. OUT terminal SPDIF Delay e Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the sound does not synchronise the image Selects an input way of audio signal For HDMI1 terminal only Digital e Selects Digital to input audio signal from HDMI terminal Analogue Selects Analogue to input audio signal from L R jack of AV2 INPUT Audio Description Audio Description Normal Sets regular audio only Hard of Hearing Sets the mix of hearing impaired audio with regular audio Visually Impaired Sets the mix of visually impaired audio with regular audio Volume e Adjusts the volume for Audio Description 0 100 17 18 Picture Off Timer i Auto Standby 4 hours Sound Select q EXIT O RETURN Access 1 Press MENU button and A Y buttons to select Timer the Timer menu will be displayed Press OK button to enter Timer menu Press A Y buttons to select item desired Press lt P buttons to adjust value Press BACK RETURN button to return the previous menu Press EXIT button to exit menu operation Sets the time until the TV automatically goes to Standby mode Auto Standby e Makes non watched or non used connected equipment go into Standby mode to reduce the power consumption UAWN Ov Picture Tuning Menu Sound Language DRIE itialetsy Timer Common Interface HDMI Control System Menu Child Lock Other S
8. distortion Zoom 1 Scales the classic 4 3 format to 14 9 Zoom 2 Scales the classic 4 3 format to 16 9 16 9 Directly displays the image at 16 9 without distortion anamorphic Note Auto mode determines the best aspect ratio to fill the screen It does this using a three step process WSS Control signal through SCART HDMI terminal to determine 13 14 1 Initial Setup lt On Screen gt Initial Setup Welcome to use the Wizard for Initial Setup Please press OK to start the wizard 2 Mode Select TV location setting lt On Screen gt Initial Setup Mode select Please select your mode Note e If you selected Shop a message appears Initial Setup lt Remote PPAG MUTE TEXT STTL EXIT ose BACK e lt Remote Operation gt we MUTE TEXT STTL EXIT Are you sure Select Yes to continue or select No to change your selection Select Home viewing environment to use in your home environment Shop viewing environment is the demonstration mode to explain main features of this TV To change viewing environment later on you will need to initialise all settings by accessing Shipping Condition 3 Country Setting lt On Screen gt Initial Setup Country Please select your country United Kingdom Ireland E Select EXIT Back a Select Next BACK RETURN lt Remote Operation gt MUTE TEXT STTL EXIT EXIT Select
9. le Rewind the selected movie the Aa movie r il Play or pause the selected movie Stop the selected movie and return to the thumbnail movie index a D O Fast forward the selected movie Option List In multi media menu you can press Blue colour key to select one of following options Viewing photos Transition Effect Photo Size Interval Repeat Playing music Repeat Playing movies Multi Audio Subtitle Aspect Change Repeat Viewing Mode 21 22 TROUBLESHOOTING Before calling your dealer or service centre for assistance check the matters below once again 1 Make sure you have connected LCD TV to your equipment 2 Check cable connection Verify that all external equipment and power cords are properly connected A w external equipment Verify that all power is switched on If LCD TV still does not produce an image re start the 5 If the image still does not appear unplug LCD TV from the external equipment and check the external equipment The problem may be with your graphics controller rather than with LCD TV When you reconnect LCD TV remember to turn the external equipment and TV off before you power up LCD TV Power the equipment back on in order of LCD TV and external equipment 6 If the problem still exists check the following chart Try these Solutions NO POWER Remote Control does not work No image Plug this LCD TV into the AC outlet Press POWER button
10. place any type of candle or naked flame on top or near the TV Do not place the TV on sloped or unstable surfaces and ensure that the TV does not hang over the edge of the base D a a Do not insert foreign objects into the TV through the air vents Do not use an unapproved pedestal mounting equipment Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall hanging brackets Do not apply strong force or impact to the display panel This TV is designed for Table top use To prevent the spread of fire keep candles or other open flames away from this product at all times Small object This product contains possibly dangerous parts that can be breathed in or swallowed by young children accidentally Keep the dangerous parts out of reach of young children Radio waves Do not use the TV in any medical institutions or locations with medical equipment Radio waves from the TV may interfere with the medical equipment and cause accidents due to the malfunction Do not use the TV near any automatic control equipment such as automatic doors or fire alarms Radio waves from the TV may interfere with the automatic control equipment and cause accidents due to the malfunction Caution Ventilation Allow sufficient space around the TV in order to help prevent excessive heat which could lead to early failure of some electronic components Minimum distance Ventilation should not be im
11. 2 EXIT Returns to the normal viewing screen 23 OSTTL Displays subtitles 24 A lV lt p OK Confirms selections and choices 25 BACK RETURN Returns to the previous menu page 26 SUBPAGE To select the subpage when the current page contains subpages 27 SIZE Teletext size function key 28 E Stop for multi media playback See page 20 21 29 gt gt Fast forward for multi media playback See page 20 21 Turning On Off LCD TV 1 WN A Complete the peripheral connections before turning on Connect LCD TV s AC Power Cord into an AC outlet Press POWER button on Side Control of LCD TV or use Remote Control to turn it ON The POWER indicator will light up green Press POWER button again to enter stand by status the POWER indicator will become red Note If there is no reaction when you press POWER on the remote control press POWER button on Side Control again to active the TV Selecting Input Source Select mode AV 1 AV 2 HDMI 1 HDMI 2 PC USB or TV by pressing INPUT AV button of Remote Control or INPUT OK button of Side Control Input Selection AV 1 AV 2 HDMI 1 HDMI 2 PC USB TV ASPECT Select screen size among Auto 4 3 Zoom 1 Zoom 2 16 9 by pressing ASPECT button on Remote Control Auto The optimum size and aspect can be chosen automatically and you can enjoy finer images 4 3 Displays the image at the standard 4 3 without
12. Hz 46 88 75 00 800 x 600 85 Hz 53 67 85 08 1 024 x 768 60 Hz 48 36 60 00 1 024 x 768 70 Hz 56 48 70 07 1 024 x 768 75 Hz 60 02 75 03 1 024 x 768 85 Hz 68 68 85 00 1 280 x 768 60 Hz 47 78 59 87 1 280 x 1 024 60 Hz 63 98 60 02 1 366 x 768 60 Hz 48 39 60 04 Macintosh13 640 x 480 35 00 66 67 Macintosh16 832 x 624 49 73 74 55 Macintosh21 1 152 x 870 68 68 75 06 Applicable input signal for PC is basically compatible to VESA standard timing Applicable input signal for PC is basically compatible to HDMI standard timing Note Signals other than above may not be displayed properly e The above signals are reformatted for optimal viewing on your display PC signal is magnified or compressed for display so that it may not be possible to show fine detail with sufficient clarity Only HDMI 1 supports PC DVI co use R L of YPbPr RCA jack for DVI mode audio input Multi media Supported Specification Image resolution i Details Restrictions pixel Format File extension Baseline jpeg 4 x 4 to 17 000 x10 000 DCF and EXIF standards Progressive jpeg Sub sampling 4 4 4 4 2 2 4 2 0 4 x 4 to 4 000 x 4 000 1 Design rule for Camera File system unified standard established by Japan Electronics and Information Technology Industries Association JEITA 2 Exchangeable Image File image file format used by digital cameras Codec File extension Restrictions MP3 mp3
13. LOUR BUTTON Used for the selection navigation and operation of various functions Red button Actives FreeView contents when MHEG source inputs 12 F P Favourite Page Opens the favourite page list in teletext mode Note Add a teletext page into the favourite page list When you enter a teletext page press F P button to open the favourite page list then press OK to add the selected teletext page into the favourite page list View a favourite page Press F P button to open the favourite page list selects a teletext page then press OK to enter the content Remove a favourite page from the favourite page list Press F P button to open the favourite page list selects the teletext page then press OK to enter the content Press F P button again to open the favourite page list selects the current teletext page then press OK to remove the teletext page from the favourite page list 13 REVEAL Reveal hidden information such as answers to a quiz 14 lt lt Fast reverse for multi media playback See page 20 21 15 gt AI Play or pause for multi media playback See page 20 21 16 Information Displays channel and programme information 17 LAST VIEW Switches to previously viewed channel or input mode 18 GUIDE Displays TV Guide Switches to teletext mode 19 ASPECT Changes aspect ratio 20 CHA V Selects channel in sequence 21 INPUT AV Opens input source list and switches to video input source 2
14. W 3 W 10 THD Headphones 3 5mm stereo mini Jack x 1 Analogue PAL I Broadcast System Digital DVB T T2 Aerial input VHF UHF jaued Aejdsig TX L24X5B With Pedestal 567 mm x 406 mm x 170 mm Without Pedestal TV only 567 mm x 367 mm x 46 mm With Pedestal 4 5 kg Without Pedestal TV only 4 0 kg 521 3 mm W x 293 2 mm H 23 5 inches diagonal 2 073 600 1 920 W x 1 080 H 100 mm xX 27 mm xX 27 mm x 2 16D 6 W 3 W 3 W 10 THD 3 5mm stereo mini Jack x 1 ve Temperature 0 C 35 C Operating Conditions pet Humidity 20 80 RH non condensing 1 Energy consumption XYZ kWh per year based on the power consumption of the television operating 4 hours per day for 365 days The actual energy consumption will depend on how the television is used 2 When the TV is turned off with the remote control and no function is active 23 24 Input Signal Compatibility Chart COMPONENT Y PB PR HDMI a COMPONENT 0 RDM 525 480 60i 60p 625 576 50i 50p 750 720 60p 50p 1 125 1 080 60i 50i 1 125 1 080 60p 50p 24p TOMO omomo Mark Applicable input signal PC from D sub terminal HDMI terminal Horizontal frequency kHz Vertical frequency Hz 640 x 400 70 Hz 31 47 70 08 640 x 480 60 Hz 31 47 59 94 640 x 480 75 Hz 37 50 75 00 800 x 600 60 Hz 37 88 60 32 800 x 600 75
15. e contrast and sharpness when viewing in a bright room e For indoor lighting conditions change Colour Balance setting to Normal or Warm for best picture viewing Normal e Recommended for viewing under normal ambient room lighting conditions Cinema e For watching movies in a darkened room with the improved performance of contrast black and colour reproduction User e Sets the settings for your preferred Game e Fast response signal specifically to provide suitable images for playing games Increases or decreases the levels of contrast according to your personal preference 0 100 Brightness e Increases or decreases the levels of brightness according to your personal preference 0 100 Colour Increases or decreases the levels of colour according to your personal preference 0 100 e Increases or decreases the levels of sharpness according to your personal preference 0 100 e With an NTSC signal source connected to the TV the picture hue can be adjusted to suit your taste 50 50 e For NTSC signal reception only Colour Balance e Allows you to set the overall colour tone of the picture Cool Normal Warm e For indoor lighting conditions change Colour Balance setting to Normal or Warm for best picture viewing Enables or disables P NR Picture Noise Reduction e Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a picture 3D COMB e Makes still o
16. e from AC outlet Turn LCD TV and peripheral equipment e Audio Cable L R on before your computer is switched on Note You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter then connect audio input to PC audio input terminal L R jacks of AV2 INPUT Video Equipment Connection Cables used for connection These cables are not supplied with this Note LCD TV When connecting the cable AC Power Cords of both Component Video Audio Cable LCD TV and external equipment should be disconnected e HDMI Cable HDMI Input from AC outlet HDMI Input Manufactured nder license PC EJ from Dolby Ld ratories PC AUDIO Dolby and thd fouble D HDMI 1 via AV 2 symbol are trq Jemarks of Dolby Laboraj fries a gt aa Bao Ca BD l AVIN 0000000000 Component Video Source AV2 IN can accept Component or Video cable DVD video equipment such as DVD player or high definition TV source Audio cable RCA x2 Note e DIGITAL AUDIO OUT Connect an audio amplifier to this jack AC Power Cord Connection This LCD TV uses nominal input voltages of 220 240V AC It is designed to work with single phase power systems To reduce risk of electrical shock do not plug into any other type of power system Consult your authorised dealer or service station if you are not sure the type of power being supplied Connect the LCD TV with all peripheral equipment before turning t
17. ent solvent thinner or other volatile substances This may degrade surface quality or cause peeling of the paint The surface of the display panel is specially treated and may be easily damaged Take care not to tap or scratch the surface with your fingernail or other hard objects Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time This may degrade surface quality Wipe the mains plug with a dry cloth at regular intervals Moisture and dust may lead to fire or electrical shock Attaching the Pedestal Installing Pedestal 1 Place the LCD TV screen facing down on a flat surface place where maintained with soft materials such as a blanket for protecting the display screen Do not disassemble or modify the pedestal 2 Use the assembly screw to fasten the neck to the base Otherwise the TV may fall over and become damaged and securely personal injury may result Do not use any pedestal other than that provided with this TV Otherwise the TV may fall over and become damaged and personal injury may result Do not use the pedestal if it becomes warped or physically damaged gE If you use the pedestal while it is physically damaged personal injury may result Contact your nearest Panasonic dealer 4 immediately 3 Use only the supplied assembly screws to fasten the During assembly use only screws supplied and make sure pedestal securely to the TV that all scre
18. ettings Select e EXIT L RETURN Access Press MENU button and A Y buttons to select Setup the Setup menu will be displayed Press OK button to enter Setup menu Press A Y buttons to select item desired Press lt P buttons to adjust value Press BACK RETURN button to return the previous menu 6 Press EXIT button to exit menu operation PC Setup e For PC input source only UAWN Input Resolution Options change depending on signals Clock e Sets to the minimum level if noise occurs H pos e Adjusts horizontal position V pos e Adjusts vertical position Clock Phase e Eliminates flicker and distortion Auto Adjustment e Automatically adjusts the image settings such as position and phase Auto Setup e Automatically sets the channels Update Channel List Updates channel list without erasing the original information Only available when Tuner Mode is set to Aerial Single RF Scan e Scans single RF channels and checks the signal condition Analogue Manual Scan Searches and stores analogue TV channels manually For TV mode only Note TV will store scanned channels even if the scanning for channels have not completed Channel Skip Skips one or more channels when using remote control to switch between channels Channel Sort Reorders the channels in the programme list Channel Edit Edits the channel number or the channel name
19. he LCD TV on e For safety unplug AC power cord when the LCD TV is not in use Pl LNG Aerial or Cable Connection Cable used for connection This Outdoor Aerial cable is not supplied with this LCD TV e Aerial Cable HDMI 2 v DIGITAL K2 ID lt lt AUDIO OUT sy Note For all aerial circuit problems please consult your local dealer Remote Control Batteries Installation 1 Remove the battery compartment cover 2 Insert two size R03 AAA batteries 1 5V according to and polarity markings inside the battery compartment To insure safe operation please observe the following precautions e Replace two batteries at the same time Do not use a new battery with a used battery e Avoid contacting with water or liquid Do not expose the Remote Control or Batteries to moisture or heat such as sunshine fire or the like Do not drop the Remote Control e f a battery has leaked on the Remote Control carefully wipe case clean and install new batteries e Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions e Remote control contains R03 AAA battery and must be kept out of reach of small children to avoid accidental ingestion e Replace only with same or equivalent type Do not mix different battery types such as alkaline and manganese batteries Do not use rechargeable Ni Cd batter
20. ies 11 12 Remote Control 1 16 2 3 FAVORITE 17 5 INPUT 19 TV 6 voL mm 20 T _ TEXT STIL 21 8 22 9 23 24 10 25 11 12 26 13 27 14 28 15 29 Panasonic TZZ00000007A 1 Standby On Off switch Switches TV On or Off standby 2 Numeric buttons Changes channel and teletext pages 3 FAVORITE Open the favourite channel list Note Add a channel into the favourite channel list When you enter a channel press FAVORITE button to open the favourite channel list then press OK to add the selected channel into the favourite channel list View a favourite channel Press FAVORITE button to open the favourite channel list selects a channel then press OK to enter Remove a favourite channel from the favourite channel list Press FAVORITE button to open the favourite channel list selects the channel then press OK to enter Press FAVORITE button again to open the favourite channel list selects the current channel then press OK to remove the channel from the favourite channel list 4 AUDIO Selects multi audio in DVB mode or MPX selection in analogue mode 5 OFFTIMER Sets the time settings of off timer 6 VOL Press to adjust the volume 7 INPUT TV Switches to TV input source 8 MUTE Press to mute or restore the sound 9 TEXT Switches to teletext mode Actives FreeView contents when MHEG source inputs 10 MENU Open or close the On Screen Menu 11 R G Y B CO
21. ion 7 POWER e Use to turn the TV On or Off TV Side Back HDMI 2 A DIGITAL ES A 2 AUDIO OUT Common Interface 1 HDMI 1 HDMI 2 Connect all kinds of HDMI output equipment e When connecting a DVI device using an HDMI DVI adapter connect the device to the HDMI1 jack 2 AV2 Connect video and audio output from video equipment 3 DIGITAL AUDIO OUT Connect an audio amplifier to this jack 4 PC Connect computer outputs to this terminal Connect an audio cable to L R jacks of AV2 and audio out jack on the computer 5 AV1 Full SCART which transmits RGB S Video and CVBS in and audio video out Analogue only 6 Aerial Jack Connects to TV RF signals aerial CATV 7 Common Interface The Common Interface Module menu provides access to software contained on Common Interface Cl Modules 8 ETHERNET This terminal is for access to the MHEG interactive services and features through an internet e Please contact broadcasters for availability of services 9 Headphone Connect a headphone stereo to this jack and the TV speaker out will be muted 10USB Connect USB memory stick to this terminal to play Multimedia 10 Computer Connection Cable used for connection This cable is not supplied with this LCD Note TV When connecting the cable AC Power Cords of both e PC VGA Cable D SUB 15pin LCD TV and external equipment should be disconnected e HDMI Cabl
22. ion of the LCD TV LCD panel is produced with very high accuracy technology There is 99 99 or more dot pixel but there is also 0 01 or less of dot pixel lack or dot pixel that is constantly lighted This is not defect Regarding LCD panel characteristic it may occur picture remain look like a mirror when the screen is changed if it displays same screen for along time Changing the picture or turn off the power supply may recover Stripe pattern more interference stripes may show up on the screen depends on the reflected picture Abnormal colour of Adjust the value of colour image High voltages are used to operate this LCD TV Do not attempt to open the cabinet If the problem still persists after following all operating instructions contact the sales dealer where you purchased LCD TV or the service centre Give the model number and explain the difficulty We will advise you how to obtain service SPECIFICATIONS TX L19X5B Power Source AC 220 240 V 50Hz On mode average power consumption Annual energy consumption ca Consumption Standby Power Consumption 17W 5 W 3W With Pedestal 454mm x 343 mm x 170 mm Without Pedestal TV only 454mm x 303 mm x 46 mm Dimensions W x H x D With Pedestal 3 5 kg Without Pedestal TV only 3 0 kg Ae 409 8 mm W x 230 4 mm H Number of pixels 1 049 088 1 366 W x 768 H 100 mm x 27 mm x 27 mm x 2 16 QD Audio Output 6 W 3
23. nasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany Customer s Record The model number and serial number of this product may be found on its rear panel You should note this serial number in the space provided below and retain this book plus your purchase receipt as a permanent record of your purchase to aid in identification in the event of theft or loss and for Warranty Service purposes Model Number Serial Number Panasonic UK a branch of Panasonic Marketing Europe GmbH Willoughby Road Bracknell Berkshire RG12 8FP eyes Web Site http panasonic net Panasonic Corporation 2012 Printed in China Q41G24MV03701
24. nction MHEGS PIN protection Asks the viewer to enter the PIN to allow presentation SCART For AV1 SCART input source only Auto Detects CVBS RGB or S Video automatically Mix Mix CVBS and RGB signals RGB RGB signal is displayed Composite gt Composite signal is displayed S Video S video input is displayed System Menu Shipping Condition 9 Resets all settings for example when moving house OAD Turns OAD function On or Off Auto Download Downloads new software by air automatically Auto Install Installs new software automatically Manual OAD Upgrades software by air manually System Information Displays the system information of this TV Software License Displays the software license information of this TV 19 20 Child Lock e Locks a channel AV input to prevent access to it e When the locked channel input is selected a message appears you need to enter the PIN number to watch the restricted content PIN e You need to enter the PIN when you access locked channel or inputs e The default PIN is 0000 Channel Block e Prevents children from watching certain channels Parental Rating Prevents children from watching certain TV programmes according to the age rating Input Block e Disables the specific external input signals Change PIN e Change the 4 digit parental control PIN Clear All e Cleans child lock settings Other Settings P
25. odule that is not approved by the service provider Additional fees may be charged depending on the service provider The compatibility with future DVB services is not guaranteed Check the latest information on the available services at the following website English only http panasonic jp support global cs tv Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers and we disclaim any liability or damage arising from operation and or performance from usage of such other maker s peripheral devices Standard Accessories First remove the mains plug from the socket T Check you have all the items shown outlet O Remote Control E Batteries R03 AAA Display panel Cabinet Pedestal TZZ00000007A x2 Regular care Gently wipe the surface of the display panel cabinet or pedestal by using a soft cloth to clean the dirt or fingerprints For stubborn dirt Dampen a soft cloth with clean water or diluted neutral detergent 1 part detergent to 100 parts water Then wring the cloth and wipe the surface Finally wipe away all the moisture Do not use a hard cloth or rub the surface too hard This may cause scratches on the surface Take care not to subject the TV s surfaces to water or C Neck and Base LI Screws x3 detergent Liquid inside the TV could lead to product failure Assembly gre neck and pees ase Take care not to subject the surfaces to insect repell
26. on side control or on Remote Control to turn on LCD TV Check POWER Indicator If this indicator no light this TV has getting trouble Check the batteries Make sure nothing is between the Remote Receiver and the Remote Control Make sure you are not too far from LCD TV when using Remote Control Maximum operating range is 7m and a 30 degree angle of the front of the TV Is direct sunlight or strong artificial light shining on LCD TV s Infrared Remote Receiver Eliminate the light by closing curtains pointing the light in a different direction etc A dedicated remote control is required for this model Basically the remote control of other brands including Panasonic other models cannot be used Check the connection between the external equipment and LCD TV When turning LCD TV on it takes a few seconds to display the image Check the system that you select is corresponding with the external equipment or the video equipment Make sure the temperature is not out of the Operating Temperature 0 C 35 C Turn off power then turn on again re start LCD TV Try these Solutions No sound Check Audio cable connection from Audio input source Adjust the Sound System Press VOLUME button Press MUTE button There are tiny black Dark or bright points of light red points and or bright green or blue may appear on point on the TV the screen This is a characteristic of the LCD panel not a malfunct
27. or further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved ol K D4 Sales and Support Information Customer Communications Centre For customers within the UK 0844 844 3899 e For customers within Ireland 01 289 8333 For further support on your product please visit our website www panasonic co uk Direct Sales at Panasonic UK e Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday Thursday 9 00am 5 30pm Friday 9 30am 5 30pm Excluding public holidays e Or go on line through our Internet Accessory ordering application at www pas europe com e Most major credit and debit cards accepted All enquiries transactions and distribution facilities are provided directly by Panasonic UK It couldn t be simpler Also available through our Internet is direct shopping for a wide range of finished products Take a browse on our website for further details CE Declaration of Conformity DoC Authorised Representative Pa
28. ower Save Reduces brightness of picture to economise on power consumption Media Player Contents Select Pee ACCESS Storage Media 1 Insets the USB storage device to the USB port on the TV 2 Press INPUT AV button and the input source list will be displayed 3 Press A to select USB and press OK button to enter multi media content Note e Partition FAT32 Not support NTFS format FAT32 Max Partition Size 32GB Max File Size 4GB Some of the USB storage devices may not be compatible with this TV please try another USB storage devices See page 25 for USB storage device compatibility e Thumbnail Index Single View Red fe Playslideshow Bue Opens TEE menu Display file information co a ae Go to the previous photo gt il e Play slideshow OoOO B e Return to the thumbnail photo index Pe e Goto the next photo e Playing Slideshow ds e Go to the previous photo Pause slideshow and display single view of the photo A al thumbnail photo index LP e Goto the next photo Selects Photo Music or Movie O Information Display file information atin le Rewind the selected music the seed music s il Play or pause the selected music Stop the selected music and return to the thumbnail music index a D O Fast forward the selected music Selects Photo Music or Movie Information Display file information avie
29. peded by covering the 10 om ventilation openings with items such as newspapers tablecloths and curtains Whether you are using the pedestal or not always ensure the vents in the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation Moving the TV Before moving the TV disconnect all cables When not in use for a long time This TV will still consume some power even in the Off mode as long as the mains plug is still connected to a live socket outlet Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time Excessive volume Do not expose your ears to excessive volume from the headphones Irreversible damage can be caused NQ D nN N A Notice for DVB functions This TV is designed to meet the standards as of August 2010 of DVB T MPEG2 and MPEG4 AVC H 264 digital terrestrial services and DVB C MPEG2 and MPEG4 AVC H 264 digital cable services Consult your local dealer for availability of DVB T services in your area Consult your cable service provider for availability of DVB C services with this TV This TV may not work correctly with the signal which does not meet the standards of DVB T or DVB C Not all the features are available depending on the country area broadcaster and service provider Not all CI modules work properly with this TV Consult your service provider about the available CI module This TV may not work correctly with CI m
30. r slow moving pictures look more vivid e For CVBS signal reception only Screen Display e Turns the screen On or Off Press any buttons except Standby to turn the screen on The sound is active even if the screen turns off e This function is effective in reducing power consumption when listening to the sound without watching the TV screen Advanced Settings Provides various advanced settings for improving the picture quality 16 9 Overscan Selects the screen area displaying the image On Enlarges the image to hide the edge of the image Off Displays the image in the original size Adaptive Brightness e Automatically adjusts the brightness and contrast after analysing the input signal This function enriches the colours and the depth of the picture Dynamic Back Light e Automatically optimises the backlight levels for dark scenes DVI Input Settings e Changes the black level in the image for HDMI input mode with DVI input signal manually e For HDMI terminal with DVI input signal only 3 2 Pulldown e Automatically detects a film based source originally encoded at 24 frames second analyses it then recreates each file frame for high definition picture quality 3 2 pulldown function is selectable when channel display shows an input resolution of 576i 480i or 1080i Picture Mode Bass Treble Balance Headphone Volume Ooo o Surround SPDIF Selection SPDIF Delay
31. sQucesocssssascasnsveaisate ase dcesssed ctsencsdeesiasachsaandousttohaseateceuocsdnerdansearacnnevaieetiasaaah 8 PART NAMES AND FUNCTION Svisssssesssccsessssvscessssccavsnssnvsccsssvcssuenesnvarcsssecaussansebescosasdesneneee 9 TV Controls WCC AN 0S acs gas ce cas cece chance cass eiressease voseacessaszecevsevuessasescasanencesssevadvsscosssasessctassieservavanasusecieomsacessasauesersetuatiorencusamenaeeaea 9 Ty Wy eE E EE EENE E EEN EEEE E EEA EN E seca 9 C i 10 onnections LAAIE Computer CG SNe toca eccesis prance sessed res ecies elder oredr ee dacinieeeen 10 ideo QUIDINIEIIT COMME CTIONN ys rasteccepseranstoecitiniawinetixinoauiirenudicannusnnseumeiniawsatn adnate 10 i AC Power Cord Connection sesssessesesesseeseessesssessessesssessteseesstestessesseestesstoseesetostosstuetestosstustesterstoseeseoostessessteseesstssteseesseesteseesseeseess 11 erial Or Capile COnnectlON srisssessisrisisersskes eose n saes au isssria nE e eaor E E s Oik Siu be raions Naki Sas ird Saser des vka PESEE Saroka ud EK Viners Esae vi 11 Remote Control Batteries Installation sssececcossscccccssscccossseecossseseoossssecososssseessssesessss 11 Remote CONUION sas caccsevcavecessvcicasatecucdents derusesvevaveusveuniensrecsensstaveasiietletenewaiceavavtardeesioene 12 TUENING OM OTF ECD TV icicsssssscvccncscsucevexeratsixntstesseesccstcsascessstoistiabantincrnatassaeseiiess IO Selecting INPUE SOURCE vissaccsesvccavsissiosvesscessetedcvcensces vasecasian
32. ssancestossasetsvessesaiserssceransiacseniene LO inital Set Peasin arira E i a U4 n creen isp ay 000000 OOOO OOOOH HOO HOH HOH HHH HOHHHHHHHHHHHHHHHHHOHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOHHHHHHHHHHHHHH8888888 PP UCI EE EEEE nu ots AEE A A A E AET 16 TROUBLESMOOTING ssssassnedicecsssecnssustonceascecasssnestsesdussanwsussssescacenstcranencaucssiespssesadccadszoasse ee input Signal Compatibility Chart sisscsssssavacsscerescsssessansecescesssssesccncecsevssensvsssanceseseesedsessenne amp COMPONENT Y PB PR FIDIV Ii coccctccesceesssssnuvessitvssvaxnsesdeeceeunessesseueucessousegi at eanes voscessoane doxhoubsnnssanvesvenaccisyauuseseosabetercedrsioneensausenae 24 PC from D sub terminal HDMI terminal sesescsssscscscssccssssccsssscsssssscssscscessssecscsseseesscscesessesssscesessscesscescesessceseasecers 24 Multi media Supported Specification 000000000 OOOOOHHHHOOHHOHHOHHOHHOHHHHHOHHOHHHHHHHHOHHOHHHOHHOHHOHOOOOCEOS 25 PAOLO seca cca eee EE cee ed E E case E esieia es deans E E E ER 25 SAFETY PRECAUTIONS Mains plug and lead To help avoid risk of electrical shock fire damage or injury please follow the warnings below This TV is designed to operate on AC 220 240 V 50 Hz Insert the mains plug fully into the socket outlet e Ensure that the mains plug is easily accessible e Remove the mains plug when cleaning the TV Do not touch the mains plug with a wet hand W immediately switch off the mains
33. supply VN switch and remove the mains plug AC 220 240 V e Do not damage the mains lead 50 Hz Do not place a heavy object RI X j j a on the lead Do not place the lead near a 1222 high temperature object S lll Do not pull on the lead Hold onto the mains plug body when disconnecting S UWA LS If you detect anything unusual ye the plug Donot move the TV with the lead plugged into a socket outlet Do not twist the lead bend it excessively or stretch it Do not use a damaged mains plug or socket outlet Ensure the TV does not crush the mains lead e Do not use any mains lead other than that provided with this TV e Do not place foreign objects inside the TV Do not allow any objects to drop into the TV through the air vents as fire or electrical shock may result IMPORTANT THE MOULDED MAINS PLUG FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY This TV is supplied with a moulded three pin mains plug for your safety and convenience A 5 amp fuse is fitted in this mains plug Shall the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI mark on the body of the fuse If the mains plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced If you lose the fuse cover the mains plug must not be used until a replacement co
34. to the manual of the optional accessories Using other wall hanging brackets or installing a wall hanging bracket by yourself have the risk of personal injury and product damage In order to maintain the unit s performance and safety be absolutely sure to ask your dealer or a licenced contractor to secure the wall hanging brackets Any damage caused by installing without a qualified installer will void your warranty Do not mount the unit directly below ceiling lights such as spotlights floodlights or halogen lights which typically give off high heat Doing so may warp or damage plastic cabinet parts Take care when fixing wall brackets to the wall Always ensure that there are no electrical cables or pipes in the wall before hanging bracket To prevent fall and injury remove the TV from its fixed wall position when it is no longer in use TV Controls Indicators PART NAMES AND FUNCTIONS 1 Remote Control Signal Receiver Do not place any objects between the TV remote control signal receiver and remote control 2 Power Indicator Red Standby Green On Green blink Receiving a command from the remote control 3 VOL e Used to change volume Used to adjust the value of the selected item on On Screen Menu 4 CH 4 Y e Used to change channels Used to select item on On Screen Menu 5 MENU Open or close the On Screen Menu 6 INPUT OK e Use to select an input source Confirm and enter a select
35. ver is obtained A replacement fuse cover may be purchased from your local dealer Do not cut off the mains plug Do not use any other type of mains lead except the one supplied with this TV The supplied mains lead and moulded plug are designed to be used with this TV to avoid interference and for your safety Example 1 If the socket outlet in your home is not suitable get it changed by a qualified electrician If the plug or mains lead becomes damaged purchase a replacement from an authorized dealer How to replace the fuse For plug type shown in example 1 Lift out the removable fuse compartment with a screwdriver and replace the fuse then refit securely into the mains plug see example 1 For plug type shown in example 2 Lift open the fuse compartment in the mains plug with a screwdriver and replace the fuse then press the fuse cover down securely see example 2 Take care To help avoid risk of electrical shock fire damage or injury please follow the warnings below Do not remove covers and never modify the TV yourself as live parts are accessible when they are removed There are no user serviceable parts inside Do not expose the TV to rain or excessive moisture This TV must not be exposed to dripping or splashing water and objects filled with liquid such as vases must not be placed on top of or above the TV Do not expose the TV to direct sunlight and other sources of heat To prevent fire never
36. ws are securely tightened If sufficient care is not taken to ensure screws are properly tightened during assembly the pedestal will not be strong enough to support the TV It might fall over and become damaged and personal injury may result Ensure that the TV does not fall over If the TV is knocked or children climb onto the pedestal with the TV installed the TV may fall over and personal injury may result Two or more people are required to install and remove the TV If two or more people are not present the TV may be dropped and personal injury may result Uninstalling Pedestal 1 Place the LCD TV screen facing down on a flat surface place Small object where maintained with soft materials such as a blanket This product contains possibly dangerous parts that for protecting the display Sete l can be breathed in or swallowed by young children 2 Remove screws in two holes with screw driver accidentally Keep the dangerous parts out of reach of young children Wall hanging Not supplied Wall hanging Insets Depth of screw minmum 6 mm maximum 7 mm i Diameter M4 screw for fixing the TV onto the wall hanging bracket not supplied with the TV View from the side VESA standard interface 75x 75mm 75x 75mm Wall hanging bracket Optional Please contact your nearest Panasonic dealer to purchase the recommended optional accessories For additional details please refer
Download Pdf Manuals
Related Search