Planar Systems PXL2240MW
Contents
1. 1 T N N 020 1221 00A2. for text editing and viewing in a word processing environment Information To display the information regarding the current input signal coming from the graphic card in your computer Note See your graphic card user guide for more information about changing the resolution and refresh rate Manual Image Adjust To manually adjust the H V position Clock Phase Sharpness and Video Mode adjust H V Position To adjust the horizontal and vertical position of the video H Position A move screen to the right V move screen to the left V Position A move screen up W move screen down Clock To adjust the width of the screen image A increase the width of screen image W decrease the width of screen image Phase To adjust the delay time of data and clock Press A or V to adjust to your preference Sharpness To adjust the clarity of a non Full HD Resolution 1920x1080 signal with V or A button Video Mode Adjust To select the video mode from Full Screen or Aspect Ratio Full Screen To select full screen size image Aspect Ratio To select input timing image size Setup Menu To set up Language Select OSD Position OSD Time Out OSD Background and Power Indicator Language Select To allow users to choose from available languages OSD Position Press V or A button to select between horizontal and vertical OSD Position adjustment OSD H Position To horizontally adjust the OSD position A move OSD to the rig
3. limits are designed to provide proper protection against harmful interference to a residential installation This Touch LED LCD Monitor generates uses and can radiate radio frequency energy Harmful interference to radio communication may be the result if it s not properly installed and used However there is no guarantee that interference will not occur in a particular installation If this Touchscreen LED Monitor does cause serious interference to radio or television reception resetting may correct it Moreover users are encouraged to reduce interference by doing one or more of the following Reorient or relocate the receiving antenna Move the Touch LED LCD Monitor and the receiver further away from each other Connect the Touch LED LCD Monitor into an outlet on a circuit different from that to which the receiver is connected Consult your local dealer or a qualified technician FCC Warning To assure a continued FCC compliance a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores Also any unauthorized changes or modifications to this Touch LED LCD Monitor would void the user s authority to operate this device Note If necessary shielded interface cables and AC power cord must be used to meet the emission level limits According to WEEE regulation this Touch LED LCD Monitor can t be handled as normal trash in Europe when it is out of usage Please refer
4. or broken pins in the cable connector could cause an improper connection Connect the Touchscreen LED Monitor to another computer Burn in LED LCD displays are subject to screen burn in image retention It s not recommended to have a static image on the LCD LED for more than 4 hours Planar Support Cables and Accessories To find cables and accessories for your Planar monitor touch screen or other Planar products visit our online store at www PlanarOnline com Technical Support Visit Planar at http www planar com support for operations manuals touchscreen drivers warranty information and access to Planar s Technical Library for online trouble shooting To speak with Planar Customer Support please have your model and serial number available and dial Planar Support Tel 1 866 PLANAR1 866 752 6271 or 1 503 748 5799 outside the US Hours 24 hours a day 7 days a week Toll or long distance charges may apply Planar Systems Inc Customer Service 24x7 Online Technical Support http www planar com support 1195 NW Compton Drive Beaverton OR 97006 1992 Tel 1 866 PLANAR1 866 752 6271 or 1 503 748 5799 outside the United States Hours 24 hours a day 7 days a week 2013 Planar Systems Inc Planar is a registered trademark of Planar Systems Inc Other brands and names are the property of their respective owners Technical information in this document is subject to change without notice 2001132404
5. 4825 mm 16 7M 4 3 3 40 3 3 476 64 mm x 268 11 mm Operating 0 C 40 C Storage 20 C 60 C FCC B CE UL cUL Input Voltage AC100 240 V 1W x 2 typical Optical Touch USB Finger s and stylus input Microsoft Windows 7 8 Wall Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the TFT Touchscreen LCD Monitor before performing the procedure below 1 Lay the TFT Touchscreen LCD Monitor face down on a soft surface 2 Remove the 2 screws holding the stand to the hinge 3 Remove the stand 4 Follow instructions included with the Wall Mount Kit NOTE 100mmx100mm VESA hole pattern n 4 M4 pitch 0 7 mm 100mm x 100mm Screw Mounting Options Troubleshooting No power Make sure A C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touchscreen LED Monitor Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage Make sure all signal cables are installed Power on but no screen image Make sure the video cable supplied with the Touchscreen LED Monitor is tightly secured to the video output port on back of the computer If not tightly secure it Adjust brightness Wrong or abnormal colors f any colors red green blue are missing check the video cable to make sure it is securely connected Loose
6. PLANAR PXL2240MW Touch LED LCD Monitor USER S GUIDE www planar com I Content ST OT NS CCCI 1 Valera date I r OS enee a O O E E OEE ENE E EEN 2 SDB OC AUN 1 O O O O O 2 CAS SNS 0 O O O O O O O O 3 Front VIEW OF the Produc su ussinaieiuhaaeaiiassaiaindusniavesiiads S esiua e into davs 4 AES A A0 i i 1015100 SR RP R O O 5 Gre TVG CaN AU O O O O 6 Basic Operation and Calibration Reset INStructiONs cssssscscsssssssssecesesesssssesessssssesesssesssesesesssceesesesesesesees 7 Advanced OperatiON OSD MeNu ccccsssssssesssessssssssssssssssssesescsssssesesesesesesesssssseseseseseseseseseseseseseaeseseseseeseseseseseaeens 9 SUDO OMG VINTMINC MODE e nsee E E E E E E E ORONO E 12 TEA O O E O E E 13 Wall Mount Installation Instructions es ssesssesseessesssessesssesseessesseesseesseoseoseesseesseossesseoseesseesscoseesseoseossesseeseesseesseoss 14 TrOUDIES NOON aerea O ONAE 15 PVA SUMO OU en O O 16 Operation Instructions Thank you for purchasing the PXL2240MW multi touch LED monitor Please read this guide thoroughly before installation FCC RADIO FREOUENCY INTERFERENCE STATEMENT WARNING FOR FCC CERTIFIED MODELS This LED Monitor has been tested and found compliant with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These
7. djust the luminance of the video A increase brightness W decrease brightness ECO Mode Allows the user to turn the ECO On or Off Contrast and Brightness adjustment disabled when ECO is active Over Drive Allows the user to turn the Over Drive On or Off Improve the guality of the motion pictures Input Select When Input Select is pressed change Input signal to VGA DVI HDMI or Auto Audio Adjust To adjust the audio functions Volume To adjust the volume of speaker output Mute To turn the Mute ON OFF Audio Input When in HDMI input select where the audio source comes from Line In or HDMI Color Adjust To select the color for improving brightness and color saturation between Cool Normal Warm User Color and Preset Mode Cool Adds blue to screen image for cooler white Normal Adds red to screen image for warmer white and richer red Warm Adds green to screen image for a darker color User Color Individual adjustments for red R green G blue B 1 Press button 2 to select the desired color 2 Press W or A button to adjust selected color Preset Mode Provides an optimum display environment depending on the contents displayed It contains 5 user selectable presets e Standard is for general windows environment and monitor default setting e Game optimized for PC game environment e Cinema optimized for movie and video environment e Scenery optimized for displaying outdoor scenery images e Text optimized
8. er cord immediately and call your service center Never remove the rear cover of your Touch LED LCD Monitor The display unit inside contains high voltage parts and may cause electric shock Never try to repair your Touch LED LCD Monitor yourself Always call your service center or a qualified technician to fix it Due to safety concerns if the VESA mounting kit is purchased separately please make sure the mounting kit is UL listed and replaceable only by service personnel Package Overview USB Cable A to B HDMI Cable User s Guide Front View of the Product PLANAR Hot keys Instructions please see Using the OSD Menu on page 7 Rear View of the Product Quick Installation 1 Ot k iS Figure 1 C Connect either VGA DVI or HDMI Video Source from the monitor to the computer Make sure both monitor and computer are powered OFF Connect the audio cable from audio output of computer to the audio input of the monitor Connect the USB cable from the computer to the monitor Connect power cord to a properly grounded AC outlet and then to the monitor Power ON computer and then POWER ON the monitor Set the timing mode on your computer Recommended resolution and refresh rate is 1920 x 1080 60Hz Audio cable USB 2 0 cable DVI cable Power cable VGA cable HDMI cable not supplied Basic Operation and Calibration Reset Instructions Before
9. ht V move OSD to the left OSD V Position To vertically adjust the OSD position A move OSD up W move OSD down OSD Time Out To automatically turn off On Screen Display OSD after a preset period of time OSD Background Allows the user to turn the OSD background On or Off Power Indicator Allows the user to turn the LED Indicator On or Off Memory Recall To recall factory settings for Video amp Audio controls Press button 2 to select the Memory Recall menu option Supporting Timing Modes Note 1 DVI and HDMI supports 480i 480p 576i 576p 720p 1080i and 1080p 2 Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings Similar PC Timing on list below e 720 x 400 70Hz 640 x 400 70Hz e 720 x 480 60Hz 640 x 480 60Hz e 1400 x 1050 60Hz 1680 x 1050 60Hz Warning Do not set the graphic card in your computer to exceed these maximum refresh rates Doing so may result in permanent damage to your monitor Technical Information Panel Power Management Displayable Resolution Pixel Dimension Display Color Tilt Active Display Area Temperature Compliance Power Amplifier spec Touchscreen Technology Touchscreen Interface Touch Method Supported O S 21 5 TFT with LED backlight On 24 Watts typical 35 Watts maximum Standby Mode lt 0 5 Watt Off lt 0 5 Watt Full HD 1920 x 1080 max Vertical Frequency 60Hz max 0 24825 x 0 2
10. r Button Locked message for 3 seconds and the message will disappear automatically Power Button Locked Repeat this step to unlock PXL2240MW Calibration Reset Instructions The PXL2240MW is available with USB connection It is Microsoft Windows 7 8 HID Human Interface Device compatible if you use the USB touch screen interface No additional software driver is required Calibration is a simple process and can be invoked by running Tablet PC Settings from Control Panel and clicking the Calibrate button Click the Reset button to reset the touchscreen to the factory calibration settings To reset the existing calibration data click Reset in the Tablet PC Settings window Advanced Operation OSD Menu You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor Press the 1 button to display the OSD Menu and use A to select the desired OSD menu A v Auto Image Adjust u os Picture Adjust Input Select Audio Adjust Color Adjust Bs Information amp Manual Image Adjust 0 Setup Menu G Memory Recall 1 Exit Select 2 Short Cuts Function from the button s Auto Image Adjust To auto adjust Horizontal Position Vertical Position Phase Fine ill KTE gt Tune and Clock H Size of the screen Contrast To adjust the foreground white level of screen image A increase contrast W decrease contrast Brightness To a
11. to the recycle information on Planar s website to handle it gue Or more information on how to recycle your product please visit http www planar com about green Unpacking Instructions Move the Touch LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam Pull the base from Parallel versus Panel to Vertical Adjust the Panel between 4 leaning forward and 40 leaning backward Safety Precautions Follow all warnings precautions and maintenance as recommended in this user s manual to maximize the life of your unit Do Turn off the product before cleaning Touch screen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners or 50 50 mixture of water and isopropyl alcohol Use a soft cloth moistened with mild detergent to clean the display housing Disconnect the power plug from AC outlet if the product is not going to be used for an extended period of time Don t Do not touch the LED Display screen surface with sharp or hard objects Do not use abrasive cleaners waxes or solvents for your cleaning Do not operate the product under the following conditions o Extremely hot cold or humid environment o Areas susceptible to excessive dust and dirt o Near any appliance generating a strong magnetic field o Indirect sunlight if smoke abnormal noise or odor emits from your Touch LED LCD Monitor remove the pow
12. using the Touch LED LCD Monitor Connect external equipment properly Insert the power plug and the power LED indicator will light orange Power On Off To turn the Touch LED LCD Monitor on off Press POWER button on the front The power LED indicator light will be blue when the Touchscreen LED Monitor is on Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen LED Monitor Displays main menu Exits from OSD menu Selects between VGA DVI HDMI or Auto mode A Select the desired item when in OSD menu When not in OSD menu directly enters Volume adjust Select the desired item when in OSD menu When not in OSD menu directly enters Preset Mode Recalls both Contrast and Brightness when not in OSD menu OSD Lock Out Function When Touchscreen LED Monitor is in normal mode the OSD Lock Out function can be enabled Option 1 OSD lock all 4 buttons are locked except the POWER button Press and hold the 1 button and the A button for 3 seconds to lock the OSD buttons The Touch LED LCD Monitor will show an OSD Locked message for 3 seconds and the message will disappear automatically OSD Locked Repeat this step to unlock Option 2 OSD 8 Power button lock all 5 buttons including the POWER button are locked Press and hold the 1 button and the W button for 3 seconds to lock all 5 buttons The Touchscreen LED Monitor will show a Powe
Download Pdf Manuals
Related Search