Home

Siig DP CyberSerial 2S PCI

image

Contents

1. extenders converters splitters cabling and more SIIG is the premier one stop source of upgrades and is committed to providing high quality products while keeping economical and competitive prices High quality control standards are evident by one of the lowest defective return rates in the industry Our products offer comprehensive user manuals user friendly features and most products are backed by a lifetime warranty SIIG products can be found in many computer retail stores mail order catalogs and e commerce sites in the Americas as well as through major distributors system integrators and VARs PRODUCT NAME DP CyberSerial 2S PCI FCC RULES TESTED TO COMPLY WITH FCC PART 15 CLASS B OPERATING ENVIRONMENT FOR HOME OR OFFICE USE FCC COMPLIANCESTATEMENT This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SHG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA Phone 510 657 8688 DP CyberSerial 2S PClis a trademark of SHG Inc SUG and the SUG logo are registered trademarks of SIG Inc Microsoft and Windows are registered trademarks of Microsoft Corporation All other names used in this publication are for identification only and may be tra
2. currently in use 3 Click OK then close Device Manager to save the changes Blank Page Technical Support and Warranty QUESTIONS SIIG s Online Support has answers Simply visit our web site at www siig com and click Support Our online support database is updated daily with new drivers and solutions Answers to your questions could be just a few clicks away You can also submit questions online and a technical support analyst will promptly respond SIIG offers a lifetime manufacturer warranty with this product This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for the life of the product SIIG will at our discretion repair or replace with an identical product or product having similar features and functionality the product if defective in materials or workmanship This warranty gives you specific legal rights and you may also have other rights which vary from state to state Please see our web site for more warranty details Ifyouencounter any problems with this product please follow the procedures below A Ifit is within the store s return policy period please return the product to the store where you purchased it B If your purchase has passed the store s return policy period please follow these steps to have the product repaired or replaced Step 1 Submit your RMA request Go to www siig com click Support then Request A Product Replacem
3. then click Device Manager For Windows Vista Right click Computer click Manage click Continue then click Device Manager For XP Server 2003 2000 Right click My Computer click Manage then click Device Manager For Server 2008 Server 2008 R2 Right click Computer click Manage double click Diagnostics then click Device Manager Double click Ports COM amp LPT CyberSerial 16Cxxx should be displayed two times Double click Multifunction adapters a SIIG 2S board should be displayed Windows ME 1 At the Add New Hardware Wizard select Specify the location of the driver Advanced then click Next Insert the driver CD check Specify a location uncheck the other box type in D then click Next Change D to match your CD DVD ROM drive letter Click Next then Finish Repeat steps 1 and 3 Restart Windows to complete the installation Windows 98 98SE 1 Atthe Add New Hardware Wizard click Next 2 Select Search for the best driver for your device Recommend then click Next 3 Insert the driver CD check Specify a location uncheck the other boxes type in D 9x then click Next Change D to match your CD DVD ROM drive letter 4 Click Next then Finish 5 Repeat steps 1 4 6 Restart Windows to complete the installation Windows 95 1 At the Update Device Driver Wizard click Next 2 Insert the driver CD click Other Locations 3 Typein D 9x click OK then click Fini
4. demarks of their respective owners May 2013 Copyright 2013 by SIG Inc All rights reserved
5. ent to submit a request to SIG RMA or fax a request to 510 657 5962 Your RMA request will be processed if the product is determined to be defective an RMA number will be issued Step 2 After obtaining an RMA number ship the product e Properly pack the product for shipping All software cable s and any other accessories that came with the original package must be included e Clearly write your RMA number on the top of the returned package SIIG will refuse to accept any shipping package and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton e Youare responsible for the cost of shipping to SIG Ship the product to the following address SIIG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA RMA e SlGwillship the repaired or replaced product viaGround inthe U S and International Economy outside of the U S at no cost to the customer 11 About SIIG Inc Founded in 1985 SIIG Inc is a leading manufacturer of IT connectivity solutions including Serial ATA and Ultra ATA Controllers FireWire USB and legacy I O adapters that bridge the connection between Desktop Notebook systems and external peripherals SIIG continues to grow by adding A V and Digital Signage connectivity solutions to our extensive portfolio All centered around the distribution and switching of A V signals over CAT5 6 these products include matrix switches distribution amplifiers
6. iver software recommended 3 AtUser Account Control click Continue For Server 2008 skip this step 4 Click Don t search online Skip this step if not prompted 5 Click Browse my computer for driver software advanced 6 Type D then click Next Change D to match your CD DVD ROM drive letter 7 Click Close Repeat steps 4 7 9 Restart Windows to complete the installation Windows XP 32 64 bit Server 2003 32 64 bit 1 At the Found New Hardware Wizard insert the driver CD 2 Select No not this time click Next Skip this step if not prompted 3 Select Install the software automatically Recommended then click Next 4 Click Finish 5 Repeat steps 2 4 two more times 6 Restart Windows to complete the installation Windows 2000 1 Insert the driver CD Close the CD autplay box if prompted 2 Atthe Found New Hardware Wizard click Next 3 Select Search for a suitable driver for my device recommended then click Next 4 Check Specify a location uncheck the other boxes then click Next 5 Type in D then click OK Change D to match your CD ROM drive letter 6 Click Next and Finish 7 Repeat steps 2 6 two more times 8 Restart Windows to complete the installation To Verify Windows 8 7 Vista XP Server 2003 amp 2008 Server 2008 R2 2000 Installation 1 Check in Device Manager to verify installation For Windows 8 7 Right click Computer click Manage
7. m DP CyberSerial 2S PCI 7 Quick Installation Guide Introduction The DP CyberSerial 25 PCI high speed serial 1 O card provides two additional 9 pin RS 232 serial ports Features and Benefits Universal PCI card design that works in 32 64 bit 3 3V 5V PCI and PCI X slots Full support for Windows based software Reduces CPU load and improves system performance dramatically IRQ sharing feature reduces IRQ conflicts High speed serial port 9 pin works with 56K V 90 external modems ISDN terminal adapters PDAs digital cameras label printers and other serial port devices Provides two RS 232 serial ports Each serial port can be configured for either 5V or 12V output for serial devices that require power System Requirements Pentium or equivalent computer with an available PCI slot Windows 8 32 64 bit 7 32 64 bit Vista 32 64 bit XP 32 64 bit Server 2003 amp 2008 32 64 bit Server 2008 R2 2000 ME 98SE 98 95 04 0649A 1 Package Contents DP CyberSerial 2S PCI board 2 port fan out cable Spare Low profile bracket Driver CD Quick installation guide Layout JP1 Serial port 1 25 pin ah Fan out cable connector 5 T iad EUNA AEC JP2 Serial port 2 Figure 1 Layout Jumper Settings JP1 JP2 Open 0 volts default Short 1 2 5V Short 2 3 12V Note Most serial devices do not require additional power through the serial port Refer
8. sh Change D to match your CD DVD ROM drive letter 4 From the Insert Disk window click OK When the Copying Files dialog box pops up type in D 9x then click OK Change D to match your CD DVD ROM drive letter Repeat steps 1 4 6 Restart Windows to complete the installation To Verify Windows ME 98SE 98 95 Installation 1 Right click My Computer click Properties then click Device Manager Double click Ports COM amp LPT CyberSerial PCI 16Cxxx should be displayed two times Double click Multi function adapters a SIIG 2S should be displayed Changing COM Port Address Some serial devices need a specific COM port in order to work If your serial device works properly do not change this setting Windows 8 7 Vista XP Server 2003 amp 2008 Server 2008 R2 2000 1 From the Device Manager window double click Ports COM amp LPT then double click the CyberSerial serial port you want to change 2 Click Settings tab and click Advanced 3 Click the down arrow that is next to the COM Port number box and select a COM port that is notin use Click OK 4 Click OK then close Device Manager to save the changes Windows ME 98SE 98 95 1 From the Device Manager window double click Ports COM amp LPT then double click the CyberSerial PCI serial port you want to change 2 Click Settings tab click the down arrow that is next to the Port Name box and select aCOM address that is not
9. the slot bracket holding screw to secure the card Replace the computer cover and reconnect the power cord Connect the 2 port fan out cable to the board s 25 pin connector See Figure 2 on page 3 for more details Driver Installation Make sure the board is installed into the computer before proceeding Windows 8 32 64 bit 7 32 64 bit Server 2008 R2 1 Insert the driver CD Close the CD autoplay box if prompted 2 Right click Computer click Manage click Device Manager 3 Right click PCI Serial Port under Other devices click Update Driver Software then click Browse my computer for driver software 4 Type D then click Next Change D to match your CD DVD ROM drive letter 5 At Windows has successfully updated your driver software click Close 6 Goback to Device Manager right click CyberSerial Communication Port under Other devices click Update Driver Software 7 Type D then click Next Change D to match your CD DVD ROM drive letter 8 At Windows has successfully updated your driver software click Close 9 Repeat steps 6 8 10 Go back to Device Manager right click PCI Device under Other devices click Update Driver Software 11 Repeat steps 7 8 12 Restart Windows to complete the installation Windows Vista 32 64 bit Server 2008 32 64 bit 1 Insert the driver CD Close the CD autoplay box if prompted 2 At the Found New Hardware click Locate and install dr
10. to your serial device s manual for more information 2 Port Fan out Cable 9 pin serial 25 pin connector Figure 2 2 port Fan out Cable Hardware Installation General instructions for installing the card are provided below Since the design of computer cases and motherboards vary refer to your computer s reference manual for further information if needed Static Electricity Discharge may permanently damage your system Discharge any static electricity build up in your body by touching your computer s case for a few seconds Avoid any contact with internal parts and handle cards only by their external edges For low profile systems remove the standard height bracket and install the spare low profile bracket now 1 Turn OFF the power to your computer and any other connected peripheral devices 2 Unplug the power cord from the back of the computer 3 Remove your computer s cover 4 Remove the slot bracket from an available PCI slot 3 SetJP1andJP2jumper settings to the desired voltage only if your serial device needs additional power from the serial port However most serial devices do not require additional power For more information see Figure 1 on page 2 The jumpers can be removed if power is not required To install the card carefully align the card s bus connector with the selected PCI slot on the motherboard Push the board down firmly but gently until it is well seated Replace

Download Pdf Manuals

image

Related Search

Related Contents

Avida-ED User Manual  User Manual - Weather Instrument Store  OPTI-UPS Charger Station User's Manual  

Copyright © All rights reserved.
Failed to retrieve file