Maxell MPC-B2800
Contents
1. to be used Please charge the product every 3 months Battery is hot Product will be warm in use in charging and just after charging Please use it after a while Remaining battery level LED does not light up There is no remaining battery Please charge the product Device cannot be charged Cables and ports connection are in correct Please double check the shape of input port of the devices Port connection is not perfect Please double check the connection Battery with short operation time Remaining battery level is low Please charge the product Battery s life span comes to end Battery s life span comes to end if operation time is extremely short even it is fully charged Specification Product size 5 1x99x11 1mm without protruded parts Input voltage current DC5V max 1A Output voltage current DC5V max 1A Unit weight 96g Operation temperature 0 40 C Charging time 4 hours Above charging time is the standard for charging battery remaining level from zero to fully charged by AC adaptor with USB output of 5V 1A output Charging time vary depends on battery remaining level or circumstance temperature Accessory USB micro USB 30cm2. MPC B2800 User manual Maxell Rechargeable Power Bank MPC B2800 Accessories Charger unit x 1 Charging cable 30cm x 1 Instruction booklet with warranty sheet x 1 This instruction manual is not allowed to be copied partially or wholly Unauthorized reproduction is also prohibited Should there be product improvements the product appearance or specifications may change without prior notice Disclaimers Maxell is not liable for the injuries due to fire accidents earthquake third party activities Maxell is not liable for other defects due to improper misuse of the product caused by the user Maxell is not liable for any injury caused when using this product or during the connection between device to device This product is designed only for Normal Consumer Use and should NOT be used for Industrial Purposes If the product is used in this way Maxell is NOT liable for human injury or fire accident Caution Please follow the caution below when using our product Danger Do not connect input and output conversely Do not take power from sources other than from the USB port Do not disassemble or modify the product Do not immerse in water Do not make short circuit to the ports Do not leave the product in places of high temperature or under direct sunlight Do not throw into fire Do not touch the product if you see any liquid leaking around Warning Do not operate the product if it generates excessive heat
3. devices to be connected this product might not have sufficient output and may not be able to fully charge the devices When data is transferring between PC and device this product might not be able to charge the devices Depending on the devices in use the devices might not be fully charged When the device is at zero battery level or depending on the device in use boosting time might be longer or the device might not be able to be charged Please check before charging Maxell warranty does not cover any accidental loss of your data Maintenance Use cloth with neutral cleansing agent or water to remove the dirt from the product body and use a soft dry cloth to clean it Don t use the gasoline thinner or alcohol etc Troubles Shooting Please contact the Customer Service department if below troubles cannot be solved Trouble Shooting Reasons Countermeasures Charging LED does not come on when this product is charging Or it takes longer than the specified charging time PC is in standby mode Change PC from stand by mode USB port does not have sufficient power Disconnect other device from the output port This product is charging when connecting to the device Disconnect the device Charge the device separately Circumstance temperature is over the operation temperature range Product is kept in no use for long period and battery is fully discharged The product is unable
4. oes not show Please charge the product 2 Charging Please use this product after a full charge Connect the input port of enclosed recharge cable to the output port of AC adaptor with USB output or PC USB port Charging LED will turn red Charging time 4 hours Charged by 5V1A output AC adaptor Charging LED will turn green when charging is complete Please disconnect the cable after charging Attention Please confirm the port direction before connection Incorrect connection may damage the product Please end charging if your device cannot be fully charged after certain period of time Don t charge this product when it is connecting to other device This might lead to heat generation or damage to the product The power from USB port of PC might not be sufficient for charging Charge the product every 3 months even if it is not often in use Otherwise the product might be fully discharged and might not be able to charge again 3 Charging smartphone It is necessary to use the enclosed USB charging cable Connect the output port of attached charging cable to the smartphone and start charging For charging iPod iPhone series please use original Apple charging cable Please check the battery level shown on smartphone or connected device when it is charging Please disconnect the cable if charging is finished or if you want to stop charging Attention Rating output for this product is DC5V 1A Depending on different
5. or have abnormal smell or change in color If any liquid from the product comes into contact with the skin or clothes please rinse with clean water immediately When the specified charge time is over and charging is still in operation please stop the charging immediately Do not drop the product Please allow product ventilation Do not use the product near inflammable gases or liquids such as gasoline Do not touch the product with wet hands Do not puncture the casing of the product Please supervise all children if allowing them to use the product Keep away from babies at all times Attention Please be careful when placing the product down do not drop it from a high distance or magnetic field place Please charge at the scope of 0 to 60 degree Do not charge the product and another charged product simultaneously Please charge the product every 3 months Parts names Body Input terminal USB Micro B Output terminal USB Standard A The rest of battery Level indicator around 100 around 75 around 50 around 25 Charging indicator LED Battery Level check button Charging cable specify for Charging It is not for data communication USB Micro B plug USB Standard A plug Operation Procedures 1 Check the remaining battery level Remaining battery level can be checked by pressing the battery level checking button The battery level LED will light up There is no battery remaining if the LED light d
Download Pdf Manuals
Related Search