Astro Curve
Contents
1. CURVE GLASS WALL LIGHT INSTALLATION INSTRUCTIONS Please read these instructions carefully before commencing work If you are in any doubt consult a qualified electrician WARNING This is a Class 2 product and must not be earthed This product is not suitable for mounting on normally flammable material eg wood Installation Instructions 12 Ensure that the electrical supply is disconnected at the fuse board 2 If removing an existing fitting note all wiring connections and which wires are connected to the light fitting 3 Push the supply cable through the large hole in the base and fix the base to a secure surface Identify where the supply cable is within the wail to avoid damage when drilling fixing holes 4 When fixing the light to the wall ensure that no wires are trapped or crushed behind the fitting 5 Connect the live cable normally Red to the terminal marked L Connect the neutral cable normally black to the terminal marked N Check that all the connections are very neat and secure 6 Once you have made the connections push the plastic cover firmly onto the terminal block so it snaps into place Ensure that the outer insulation of the supply cable is inside the sleeving of the terminal block 7 Fit 2 x 40W candle bulb 8 Carefully fit the glass cover with the knurled screws ensuring the plastic washers are used between the glass and the screw Do not over tighten the screws Your Curve wall light is now ready fo2. r use WIRING FROM LIGHT FITTING GB HOUSE ELECTRICAL SUPPLY
Download Pdf Manuals
Related Search