Home
        Jamo 6.5CS T Set
         Contents
1.            Custom painting  The grill and frame may be painted to match your decor  Paint the grill and frame separately  before mounting to the wall  After painting the grill blow air through the holes to prevent  clogging  The speaker is supplied with a sheet of acoustically transparent foam  This may be  inserted behind the grill so the holes look less dark     Maintenance  All Jamo loudspeakers are made of modern thoroughly tested materials  which will usually require  no maintenance  other then dusting or drying with a soft  dry cloth  If the loudspeakers have  become greasy  the grease may be removed by moistening the cloth with water and possible  using a mild detergent     NOTE  Never use any scouring powder  household cleansers or any other solvents for cleaning the  loudspeaker        Fig  2    The scope of the warranty    The warranty period will come into force as from the purchase date stated on the invoice  The warranty will  apply for the following period of time     e 2years for electronics  power supply  amplifier  etc      7 years for other parts  cabinet  speaker units  etc      In case of warranty inquiries  please contact your dealer   In case of request for service under warranty  please enclose your original receipt     Defects covered by the warranty   Except for the defects stated below  the warranty covers any production and material defects of the product        Defects not covered by the warranty      Defects arising from accidents  misuse  normal 
2. In Ceiling speakers       WARNING  Improper installation of the speaker could result in amplifier damage  Read all  instructions before installation     Jamno    Lets get personal    Placement  Make certain the speaker is located between ceiling joists to avoid cutting into joists  Place the  supplied template a minimum of 5 8    from any joists  Draw a line around it to mark the cutout   Take care when cutting the hole to avoid cutting into pipes or electrical conduits  If you encounter  pipes  electrical conduits or other obstacles you may have to select another location for the  speaker     Installation  Before installing the speaker connect the speaker wires as described under    Hookup        Remove the grill from the speaker  First loosen screws A  fig  1  by turning them counter clockwise   Loosen all 4 screws until the    Dog ears    B  fig  2  can move freely  Do not remove the screws   Install the speaker into the ceiling and position it  Turn screws A clockwise until they are tightened  and the frame firmly installed     Before reinstalling the grill on the speaker make adjustments as described under    Adjustments      Reinstall the grill  If the grill has a loose fit and or is vibrating when the speaker is playing remove  the grill  install the supplied non curing glue strips at locations C  fig  1  and reinstall the grill     Hookup  The receiver amplifier must be turned OFF before you connect the speakers or it may cause  damage to the receiver amplifier     Co
3. nnect the speaker wires from the receiver amplifier to the speakers  When connecting the  speaker wires make sure that LEFT  L  is connected to LEFT  L   RIGHT  R  to RIGHT  R   POSITIVE      to POSITIVE     and NEGATIVE     to NEGATIVE      If terminals are color coded  RED is POSI   TIVE     and BLACK is NEGATIVE         For dual voice coil models  designated by DVC in model number  connect LEFT  L  to one side  and RIGHT  R  to other side of speaker     Adjustments  The tweeter can be tilted towards the listening area  due to high frequencies being more  directional than low frequencies  The impedance of the speaker and the level of the tweeter are  adjustable except on DVC models  Both adjustments are located on the front of the frame     IMPEDANCE    The factory setting is 8 ohm  If the receiver amplifier specifiesa minimum  S      impedance of 4 ohm  the speaker may be switched to the 4 ohm posi  M   8Q 40a  tion  This will make the speaker play louder  When installing more then 1 rie   pair of speakers to a receiver amplifier special care should be taken to impedance matching the  speakers to the receiver amplifier  This may require impedance matching devices  Consult your  dealer for information regarding impedance matching        TWEETER LEVEL     The factory setting is 0 dB  The level of the tweeter can be lowered T0323  by 3 or 6 GB to Suite individual tastes in different room ot OR  environments  Experiment with the settings to find the preferred sound            
4. wear and tear  mis maintenance  voltage variation   overloading  stroke of lightning  and other force majeure events     Defects arising from incorrect installation or operation     Defects arising from modification repair attempt of repair by a non authorised service centre     Defects arising from the use of non original spare parts     Defects on products with altered or lacking series number   e Other defects due to conditions or circumstances beyond the supplier s control       Transportation costs for servicing are not covered by the warranty     The supplier is liable only to repair or replace defective parts or products  A replacement cannot exceed the  value of the product under warranty     69447   39 2000    
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Fiche technique du Guido Magazine  Télécharger  - Archipel  1901-01 RC Manual    PROCESADORES DIGITALES DE SEÑAL    n `A HYDRAULIC TRANSMISSION  自立式汎用展示台支柱 MPT-200S 取扱説明書 お問い合わせ先  G15/G40 Spray Gun, Instructions/Parts, Japanese      Copyright © All rights reserved. 
   Failed to retrieve file