Home

Samsung HG32NB690PF

Contents

1. Smoovie TV Setup Air Cable Step Only Air or Cable used Only Air or Cable used If the TV starts with Hotel Plug amp Play If Hotel Plug amp Play already done 1 Do a complete P amp P including Air or Cable auto tune Enter the Hotel menu Select the channel type 2 After P amp P the TV displays the Hotel menu ATV or ADTV for Air CATV or CDTV for cable Select the channel type 3 ATV or ADTV for Air Select Smoovie TV in the Hotel menu CATV or CDTV for cable 4 Select Smoovie TV in the Hotel menu Select Channel Setup 5 Select Chan nel Setup Select Air or Cable to auto tune Can be skipped 6 Select Air or Cable to auto tune Can be skipped Set up channels in the CH Bank Editor 7 Set up channels in the CH Bank Editor After power off amp on guests can use the TV 8 After power off amp on guests can use the TV 9 10 lli Channel Editor The Channel Editor lets you edit the channels stored in the TV s memory Using Channel Editor you can Change the channel numbers and names and sort the channels in your desired channel number order Apply the video mute to channels you select The vido mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen The Channel Editor also lets you view information about each channel easily without your having to display each channel directly Depending on model and region some menu items may no
2. Open Smart Hub Open the menu Select a source Turn off the TV Power on Adjusting the volume Selecting a channel Using the Function menu Selecting the MENU m Selecting SMART HUB 8 Selecting a Source D Power Off The control stick is located at the lower left corner on the back of the TV Remote control sensor When you use the Remote control the standby LED does not respond except when you press the button Turn the TV on by pressing the Controller when the TV is in standby mode Adjust the volume by moving the Controller from side to side when the power is on Select a channel by moving the Controller backwards and forwards when the power is on To view and use the Function menu press and release the Controller when the power is on To close the Function menu press and release the Controller again With the Function menu visible select the MENU LIII by moving the Controller to the left The OSD On Screen Display Menu appears Select an option by moving the Controller to the right Move the Controller to the right or left or backwards and forwards to make additional selections To change a parameter select the it and then press the Controller With the Function menu visible select SMART HUB 8 by moving the Controller upwards The SMART HUB main screen appears Select an application by moving the Controller and then pre
3. SERIES G 690 LED IV Installation manual imagine the possibilities Thank you for purchasing this Samsung product Toreceive more complete service please register your product at Www samsung com register Model Serial No Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Introduction This TV has functionality that lets it interact with a set back box SBB STB and with other TVs in a computer controlled system for hotels and other hospitality businesses Interactive When the TV is powered up initially it sends a command to identify the connected SBB STB If it identifies the SBB STB the TV switches to ONLINE mode which gives full control of the TV to the SBB STB When the TV is in ONLINE mode it stops accepting IR Samsung remote commands and acts according to the interface protocol Stand Alone If you are not using an SBB STB and the TV cannot or does not identify an SBB STB you should switch the TV to STAND ALONE mode with restricted operation Operational Modes When this TV is in Hotel mode and is operated with an SBB STB it is in one of two states ONLINE or STAND ALONE e Inthe STAND ALONE state the TV will act as a Hotel TV but without active communication This is to prevent guests from trying to cheat the system by disconnecting the SBB STB Stand alone
4. Display time OSD timeout and operation are the same as Samsung s consumer TV models e Pic you press the Enter key the Select Country OSD appears ture Mode OSD nitially highlighted Standard The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode After you select the picture mode the TV displays the Standalone Setup Menu OSD Press power off to exit e Auto Search Mode OSD If you select the Skip option the TV displays the Clock Mode OSD If you press the Enter key the TV auto searches for channels The OSD Display time which starts at the time that Auto Store is completed and goes to the time Auto Sort starts is 30 seconds e Set Clock Mode DST Daylight saving time and Time Zone OSD Initially highlighted Clock Mode Auto DST Off Time Zone Eastern If the TV will be tuned to digital broadcast channels and these channels transmit date and time information set the Clock Mode to Auto The TV will set the date and time automatically Ifthe TV will not be tuned to digital broadcast channels set the Clock Mode to Manual and then set the date and time on the TV manually Set DST On or Off to apply or not apply daylight saving time to the TV Select your time zone on the map that appears H USB Software Upgrade Method Samsung may offer upgrades to the TV s software SW in the future Please contact the Samsung Hospitality H
5. Press MUTE 1 1 9 Enter on the remote to enter the Hotel Standalone menu 2 Please select SI vendor Smoovie 3 Findthe new menu option Channel Bank Editor 4 Enterthe Channel Bank Editor Hospitality Mode Standalone Network Si Vendor OFF Widget v v Y Depending on model and region some menu items may not exist 5 Edit the Channel Bank An example is below a Bankt Free channel Select the channels that will be accessible when a remote doesn t have a card b Bank Family Card Green Select the channels that will be accessible when a remote has a GREEN CARD c Bank3 Adult Card Red Select the channels that will be accessible when a remote has a RED CARD Channel Bank Edit Registered Banki 4 Bank 6 Banks 86 a a ajaaa B Select All Items on Column Deselect All Items on Column C Select Deselect 9 Return Information About SMOOVIE Remote Controls e f you select SMOOVIE as the SI vendor you should also use SMOOVIE remotes in your facility e Guests with remotes that do not have a card can only view channels from Bank 1 Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1 e Guests with remotes that have Green or Red cards must use the channel up down keys to change channels e Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List English 3 5 Smoovie Set Up Sequence
6. being the highest and 3 the lowest The TV automatically displays the source with the higher priority See above for a more detailed explanation 7610 AV Option AVI Select RUP AV Source AV1 AV2 RJP HDMI Option HDMI1 DVI Select RJP HDMI Source HDMI1 DVI HDMI2 HDMI3 HDMI4 HDMI Music Mode Allows music output from an mp3 audio player connected to an HDMI Input Source When on you can hear sound from the player through an HDMI input of the RJP whether there is a video signal or not This option is only compatible with the Guest link RJP Sound Bar Out Turn Sound Bar Out on or off Refer to Page 34 USB Media Mode Defalut When a USB device is connected to the TV e Default Popup window appears e Automatic Opens the USB contents menu automatically Disable Neither the pop up window or nor the menu appears External Source External Banner Source ON If set to On the TV displays the External Source Banner information when you change the TV source to another external input press the Info key or turn the TV on ON The External Source information is displayed on the TV screen e OFF The External Source information is not displayed on the TV screen Auto Source OFF ON When an external input source is connected to the TV the TV identifies the input source and then automatically switches to that input source e OFF Auto Source function is Off A
7. mu m uni V ipn VOL DOWN VOL UP GND White Black Red Shield Wire 9 English 1 7 Connecting the RJP Remote Jack Pack Connect the input jacks on the TV to the RJP The RJP lets guests connect audio and video sources to the TV RJP Rear 4 RS 232 Data Cable we MM Sumo RCA ADOPO S TV Rear Panel COMPONENT HDMI IN 4 AN ARC DVI AUDIO IN 1 D sub PC Audio cable oan O 2 Video Audio Cable 3 HDMI cable 1 Connect the PC IN PC DVI AUDIO IN port of the TV to the PC AUDIO port of the RJP 2 Connect the AV IN VIDEO R AUDIO L port of the TV to the RCA port of the RJP 3 Connect the HDMI port of the TV to the HDMI port of the RJP 4 Connect the EX LINK port of the TV to the RS 232 port of the RJP i This Samsung TV is compatible with the TeleAdapt TA 7610 RJP only 18 English RJP Remote Jack Pack RJP stands for Remote Jack Pack The RJP is a hardware module that has different Audio Video inputs A V Audio PC and HDMI and corresponding outputs The corresponding outputs are connected from the RJP to the TV The RJP communicates with the TV via RS232 A Hot Plug amp Play function allows hotel guests to connect an external source to the RJP The RJP communicates with the TV by sending messages regarding Active Inactive Sources A group of menu items RJP Priority AV RJP Priority PC and RJP Priority HDMI let you assign number
8. 090 BMP or AVI files only e Max file size BMP 960 X 540 AVI 30MB The file can only be named samsung bmp or samsung avi Logo Display Time Hospitality Logo Display Time 3 5 7 seconds Clone TV to USB Clone the current TV option values to a USB memory device Cloning Clone USB to TV Clone the saved TV option values in a USB memory device to the TV Setting Auto If you set Setting Auto Initialize to On and the TV s power is turned off and on guest CER OFF i Initialize side menu items are restored to their cloned values See page 31 Lets you set when data such as updated SW cloning files and S LYNC REACH contents is downloaded from the REACH server to the TV e Off REACH data is updated on the TV only at the time you set in REACH Server Update Time REACH Server ii e hour Every 1 hours update Time our e 2hour Every 2 hours e 12 00 am Every 12 00 am e 2 00 am Every 2 00 am e 12 00 pm Every 12 00 pm e 2 00 pm Every 2 00 pm e ON Whenever the TV enters standby mode the power cord is plugged in and the REACH Update OFF power is off the REACH data is updated on the TV Immediate e OFF The REACH data is only updated on the TV at the REACH server update time REACH REACH Server Assign a DTV channel number to carry the update REACH data This channel number 87 Server Channel must be the same as the number set on the Reach server REAGI SENEN 0000 Displays the current REACH data version Version REACH Server Al Sele
9. Hotel Setup from one TV to a USB device and then upload these settings from the USB device to other TV sets This lets you create a standard array of settings and distribute that standard array to all the TVs in your facility Cloning from TV to USB Copies stored menu settings from a TV to a USB device 1 Insert a USB drive into the USB port on the rear of the TV 2 Enter the hotel option menu by pressing buttons in order MUTE 1 1 9 ENTER l 0010 3 Press the A or V button to select Cl one TV to USB and press the ENTER button 4 When the message Clone TV to USB is displayed Press the ENTER button 5 The TV displays one of the following messages InP i ta t B Md as Completed Copy was successful Clone USB to TV Failed Copy was not successful No USB USB is not connected The clone folder will be labeled T MST12AKUCB The cloned values include the values on the Guest side menu brightness picture size contrast etc and the Hotel side menu Cloning from USB to TV Copies menu settings in a USB device to a TV i Shortcut Turn the TV off insert the USB device turn the TV on and then press the ENTER button for 5 seconds To clone data to the TV using the Hotel menu follow these steps 1 Turn the TV off Clone TV to USB 2 Insert the USB drive into the USB port on the rear of the TV 3 Turn the TV on Setting Auto Initialize OFF 4 Enter the Interactiv
10. Mode SBB STB Online if one success within 10 attempts Power SBB STB SBB STB Status Attempt Online 10 every 2 seconds ON consecutive fails T Online Mode Poll Rate 20 sec To set the options for Stand alone or Interactive Online mode refer to pages 19 23 Setting the hotel option data Menu Items e You can restrict all or some operations to prevent guests from cheating the TV system You can can set Volume limits and lock or unlock the Panel buttons Still image warning Avoid displaying still images such as jpeg picture files or still image elements Such as TV channel logos panorama or 4 3 format images stock or news bars or crawls on the screen Displaying still pictures continually can cause uneven screen wear which will affect image quality To reduce the chance that this effect will occur please follow the recommendations below e Avoid displaying the same TV channel for long periods Always try to display a full screen image Reduce brightness and contrast to help to prevent the occurrence of after images e Use all TV features designed to reduce image retention and screen burn in Refer to the proper user manual section for details Ensuring Proper Ventilation When you install the TV maintain the distances shown below between the TV and other objects walls cabintet sides etc to ensure proper ventilation Failing to do so may result in a fire or problems with the TV caused by
11. TV s ID code follow these steps 1 Aim the remote at the TV and then press the Blue button on the remote for more than 7 seconds The TV displays the current ID in the middle of the screen and displays the words Remote control code is set to x If you want to change the Remote control code enter the digit you want to change 2 Press the number on the remote you want to assign to the TV The TV displays the following words Remote control code is changed to x The TV will display the OSD until you press the Exit button See the example below Remote control code is set to 0 If you want to change the Remote control code enter chosen digit Example After you see the message above if you press 1 the TV and Remote will be set to ID code 1 The TV then displays the following message Remote control code is changed to 1 The TV can then only be controlled by a remote which has the same ID code 1 If the ID code of the remote and TV do not match the TV displays the following message TV ID x x is the TV s ID To reset the ID code press the Yellow button for more than 7 seconds The ID codes of the TV and Remote are reset to 0 Remote control code is set to 0 appears on the TV 30 English H Setting Auto Initialize When you clone settings from one TV to another you clone both the guest side menu and hotel side menu settings Picture Sound Input Channel Setup and Hotel Setup This lets yo
12. an increase in its internal temperature When using a stand or wall mount use parts provided by Samsung Electronics only f you use parts provided by another manufacturer it may cause a problem with the product or cause the product to fall leading to serioius injury Installation with a stand Installation with a wall mount 4 inches 4 inches 4 inches 4 inches Additional Information x The appearance of the TV and its accessories may differ from the illustrations in this manual depending on the TV 9i Be careful when you touch the TV if it is on or has been on for a period of time Some parts can be hot Contents Laine ues eL ESTE 2 s Operational MOGSs s Frat intet apti redeat e den fre ti a ERN RE METUS 2 Z e SUMMITS WaMINdE ER RSR boas net a ove ab i ente tenth i deb RERO En tre fie a eH MEER 2 e Ensuring roper Ventilatoren aa aE AEA EAE E d RaR xe baba pato TN ox enr 2 e s JAcdrtoneliftont Tells cose stem a sm dd ne II Eee 2 iose c 4 s motalling the ED NES ANR metet tereti an etude iet fries estime le Gate 5 e Assembling the swivel 32 inch TVS or larger sienne 7 Using the TV s Controller sorte ete cd erri Pene die R a i Re ee X Rasa 8 e The Connection Panel gt The Remote GOMTO CT Gonnecting TO THEINGTWOMK irt cire iter tere p eee enr eo sro rs A RR RE 12 s Connectin
13. cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Always have two people mount the TV onto a wall VESA screw Standard Product TV size in hole specs Screw Quantity Family inches A B in Length millimeters Pitch in mm 32 40 200 X 200 LED TV M8 4 46 55 400 X 400 A Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock English 4 1 Anti theft Kensington Lock The Kensington Lock is a device you can use to physically fix a TV PS s to a location when you use it in a public place The appearance and P A 5 locking method may differ from the illustration at right depending on the zD 9 manufacturer Refer to the manual provided with the Kensington Lock for Y S additional information on proper use R E 8 E M The Kensington Lock is not supplied by Samsung eoo amp Please find the fg icon on the rear of the TV A Kensington slot is Optional beside the f icon To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair 2 Sl
14. connected to a WIRED Network Picture Mode Standard Network type Wireless Wireless network Select After Searching channels Antenna Both Digital Cable System Eu Analog Cable System STD Select the channel band to use for Auto Program 3 2 English Hotel Plug amp Play OSD Initially highlighted Interactive you select the Standalone Only button the Standalone hotel mode is set by default and the Standalone mode is set OSD appears for 3 seconds TV enters into RF mode automatically after displaying the Standalone mode is set OSD for 3 seconds you select the Interactive mode the Interactive Setup Menu is displayed Press the power off key to exit from the Interactive menu you select the Standalone Plug amp Play mode the Select Menu Language OSD appears e LocalSet Initially highlighted US you press the Enter key after selecting Change you can change the country the country is changed the TV automatically turns off and on you select the Interactive mode the Interactive Setup Menu is displayed Press the power off key to exit from the Interactive menu you select the incorrect country execute TV Reset again after entering the Service section of the Hotel Menu e Select Menu Language OSD you select Standalone from the Select Hotel TV Mode OSD the Select Menu Language OSD appears Initially highlighted English
15. default priorities Scenario 1 When no inputs are connected Source To Connect AV 2 Sec PC 0 7 Sec HDMI 3 9 Sec Scenario 2 When two or more inputs are connected and an Input source is disconnected and then reconnected Source Disconnect To Connect Total AV 4 5 Sec 2 Sec 6 5 Sec PC 0 7 Sec 0 7 Sec 1 4 Sec HDMI 3 9 Sec 3 9 Sec 7 8 Sec An example If the RJP has all its live sources AV PC and HDMI connected AV has been assigned the highest priority the RJP is in HDMI mode and a guest removes and reconnects the AV source the minimum time required to switch to the AV source is 6 5 seconds To connect audio Ipod or Mp3 Music mode should be ON AN PC and HDMI input sources are supported English 19 Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode the TV has two Hotel mode menus the Stand alone mode menu and the Interactive mode menu The menu items that differ between the menus are listed below Items in the Standalone menu only REACH Server update Time REACH Update Immediate REACH Server Channel REACH Server Version Items in the Interactive menu only SI Vendor Lodgenet Remote If you selected MTI or EBL as your SI Vendor All other items appear in both menus To access the menus press MUTE 1 1 9 ENTER on your Samsung remote After a menu appears follow these general directions to n
16. 3 NB677 and NB678 models OFF Turns off CAS support CAS Pro idiom LYNK DRM Select to turn on S LYNK DRM CAS support only Pro idiom Select to turn on Pro idim CAS support only LYNK DRM PI Select to have the TV support S LYNK DRM CAS and Pro ldiom CAS PI AES Data OxD27B Displays the current state of Pro Idion AES Lets you check the state of the TV picture and sound Self Diagnosis Picture Test Use to check for picture problems If the problem appears in the test for mU picture select YES and then follow the directions on the screen e Sound Test Use to check for sound problems If the problem occurs during the test select YES and then follow the directions on the screen Lets you check the state of Pro Idiom and its communication with the SI STB or SBB f you have any problems with the Pro idiom encryption channel or the communications with the SI STB or SBB use this diagnosis function If Pro Idiom DTV Channel Key Self Diagnosis for Loss appears to have failed and the Pro ldim encryption channel has failed to play Service Um content first check the broadcasting systems related to Pro Idiom encryption If your broadcasting system does not have a problem contact Samsung Service If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has ailed first check your SI STB or SBB If your SI STB or SBB does not have a problem contact to Samsung Service PI AES Log OFF Displays the state of Pro Idiom AES
17. 4 Select OK and then press the Enter button to close the Information screen No detailed information 38 English The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below In the example there are two external sources connected to the TV HDMI2 DVI and AV You can assign a new analog channel to an external source by selecting the source on the last page pressing the Tools button selecting Edit Channel Number and then using the up or down arrow button on the remote to select the channel number of the analog channel If you tune to a channel after assigning the channel to an external source you can enter the external source without opening the TV source menu Channel MLS Soccer CNN NEWS American Idol 90210 LOST Euro Football HDMI1 HDMI2 DVI HDMI3 G Select All Page C Select gI Tools 5 Return After assigning channel number 997 to the AV source Channel MLS Soccer m E 629 CNN NEWS American Idol 840 90210 LOST GLEJ AV Euro Football an HDMI1 HDMI2 DVI an HDMI3 EX Delete E Select All Page C Select gI Tools D Return English 39 Installing the Wall Mount Preparing befor installing Wall Mount for 46 50 models To install a wall mount from another manufacturer user the Holder Ring The Product shape may differ depending on the model Installing the Wall Mount Kit The wall mount kit sold separately allows yo
18. 64 67 500 75 000 08 000 1280 x 720 45 000 60 000 74 250 1280 x 800 49 702 59 810 83 500 1280 x 1024 63 981 60 020 08 000 1280 x 1024 79 976 75 025 35 000 1366 x 768 47 712 59 790 85 500 1440 x 900 55 935 59 887 06 500 1600 x 900RB 60 000 60 000 08 000 1680 x 1050 65 290 59 954 46 250 1920 x 1080 67 500 60 000 48 500 NOTE e The interlaced mode is not supported e The set might operate abnormally if you select a non standard video format e Separate and Composite modes are supported SOG Sync On Green is not supported 44 English HG32NB690 HG40NB690 HG46NB690 HG55NB690 Front view Side view e o A UA o Aa Y e 9 Unit inches o e o 6 HG32NB690 29 0 16 5 17 2 19 8 1 9 6 2 HG40NB690 36 5 20 3 21 4 24 0 1 9 8 9 HG46NB690 41 7 20 3 24 3 27 0 1 9 8 9 HG55NB690 44 7 20 3 25 9 31 2 1 9 8 9 Jack panel detail Rear view i 2 o 6 6 9 HG32NB690 7 8 7 8 10 5 Sal 4 1 4 8 5 0 HG40NB690 7 8 7 8 14 8 5 1 6 1 6 9 5 0 HG46NB690 15 7 15 7 12 9 543 6 9 6 5 5 0 HG55NB690 15 7 15 7 16 7 5 8 9 6 9 3 5 1 English 45 Base Stand detail HG32NB690 HG40NB690 HG46NB690 HG55NB690 Unit inches 7 5 dime
19. H MODEM jack of the STB SBB with the Data cable Data cables are polarized Make sure you attach the end marked TV Side to the TV and the end marked STB Side to the STB Also make sure you use the correct data cable for your vendor 14 English H List of Vendors and Compatible Data Cables Supplied with the TV Confirm you are using the correct data cable for your vendor Refer to the code label on the data cables Confirm the code on the de Label Note the labeled end sede Labs Note the labeled end Vendor Cable code Pin assign Remark CON A CON B CON A CON B E GND as 4 7 p OCC BN39 00865B i s 542 S Ne Provided SN US 2 5 1 NC 4 ES LJ WS Rx CON B gt 6 1 NC 5 129 Tx NXTV BN39 01011B if EX 2 l M 5 GND 1 N6 IR lt CON A gt CON B CON A CON B 1 Tx 5 GND N ee 4 E nStreams BN39 01110A se si Tm 2 Rx A 2e 1 m fi NO a 4e 5 4 E CON A gt CON A CON B CON B 6e el s BNA 8 eal 8 9o LodgeNet MTI MTI BN39 01011C is E se 5 om s 2 Rx UII s 4 E Tx Provided 1 CLK 2e 5 6 CLK le 6 English 1 5 li Connecting the Audio Output to an Audio Amplifier TV Rear Panel aif AUDIO OUT AUDIO IN Amplifier 1 Stereo cable 1 Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a s
20. Hospitality Logo You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu Welcome Message supports the following characters amp Capital Leters from A to Z You can edit the Welcome Message by using the remote s navigation color and Enter buttons in the Edit Welcome Message OSD See the illustration below Edit Welcome Message gt Move Enter 9 Return Below are the general directions for navigating and changing letters on the Edit Welcome Message screen Press the A button on the remote to move to the left in the message Press the B button to move to the right After you have selected a position in the message use the arrow buttons on your remote to select a letter in the alphabet below the message Press Enter to place a letter into the position you selected Press the C button to erase a letter in a position or enter a blank Press Return or the D button to exit English 25 a Hospitality Logo The Hospitality Logo function displays the Hotel s picture image when the TV is powered on Hospitality Logo settings are the Hotel mode menus The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on If there is a logo image stored in memory and the Hospitality Logo option is on the Hospitality logo is displayed when the TV is turned on The Hospitality logo is not displayed when the Hosp
21. avigate and change values Use the Up and Down arrow buttons on the standard remote to move from menu item to menu item Press the Enter or Left or Right arrow buttons to select a menu item The screen displays that menu item only Press the Left or Right arrow button to change a value The Right arrow button increases numerical values The Left arrow button decreases numerical values When the screen is displaying one menu item you can press the Up or Down arrow button to display the next or previous menu item Press the Return button to exit a menu item and return to the Main menu To exit a Hotel mode menu turn off the TV and then turn it on again Any changes you made are saved except changes to SI Vendor For changes to SI Vendor you must turn the TV off wait until the Standby light glows steadily then unplug the TV wait for the Standby light to go off and then plug the TV in again Network SI Vendor Widget Power On Service Channel Menu OSD Operation Clock Music Mode External Device External Source Bathroom Speaker Eco Solution Logo Message Cloning REACH Server Above The Hotel mode menu To change menus follow these steps 1 Highlight the Hospitality Mode menu item in the top left corner of the menu 2 Press the left or right arrow button on the Samsung remote Only the Hospitality Mode menu item is displayed 3 Press the left or right arrow button to change the Hospitality Mode item f
22. channel number of a channel you select To change a channel number follow these steps 1 Select a channel on the Channel Edit screen 2 Press the Tools button on your remote EE 3 Select Edit Channel Number in the Tools menu pem 4 Use the up or down arrow keys to change the channel number SelectAll Select 9 Return 5 Select OK when done and then press the Enter button i When you change the channel number the channel information is not updated automatically ok Rename Channel cancel Use Rename Channel to change the name of a channel you select To change the name of a channel follow these steps 1 Select a channel on the Channel Edit screen 2 Press the Tools button on your remote 3 Select Rename Channel in the Tools menu 4 Use the on screen keyboard that appears to enter the new name for the channel Use the arrow buttons on your remote to select a letter or number and then press Enter Repeat for each letter or number you want to select 5 When finished select Done on the bottom of the screen and then press the Enter button Adjust Input Number 9 Return Gp Shit T Space Done cancel Information E Delete Space Return Use Information to view information about a channel you select To view information about a channel follow these steps 1 Select a channel on the Channel Edit screen curd 2 Press the Tools button on your remote 3 Select Information in the Tools menu
23. ct the group ID of the REACH server Refer to the REACH server manual for more Group ID details ON The S LYNK REACH meru is displayed SYNKE REACH OFF OFF The S LYNK REACH menu is not displayed ON The TV sound of the current TV source is continouly outputted even when the S LYNK REACH ON S LYNK REACH menu is displayed Volume OFF The TV sound of the current TV source is stopped when the S LYNK REACH menu is displayed IPG Room Type Default Selects the IPG room type of the REACH server Refer to the REACH server manual for the more information ON The TICKER content is displayed TICKER OFF OFF The TICKER content is not displayed Network Setup Connect to a wired or wireless network and access the Internet Network Hotel ID Setting Set a Hotel ID Apps Edit Download update organize and delete apps Use WebBrowser or Hospitality Browser English 23 Menu Item initial Value Description Widget Mode ON Widget Mode ON OFF Solution Type Vender Server Select type of solution Vender Server SINC Server Server URL Setting Set server URL License Server IP Setting Set server IP Widget IPTV Mode IPTV mode On Off Virtual Standby mode On Off Virtual Standby OFF When Virtual Standby is On TV power consumption will be 9 5W to 17 4W Depending on ithe size of the TV screen FAN Source ON Source Menu On Off Browser Configures CAS support Applies to only the NB67
24. d provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free n the United States 1 866 894 0524 n Canada 1 800 213 8513 E License TheaterSound SRS and the symbol are trademarks of SRS Labs Inc S fS TheaterSound technology is incorporated under licence from SRS Labs Inc SRS TheaterSound provides the most immersive surround sound experience from the TVs built TheaterSound E du Es in speakers while maintaining steady volume and delivering rich bass and clear dialog pa DOLBY Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are 2 0 Digital Out registered trademarks amp DTS 2 04 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software O DTS Inc All Rights Reserved DivXG DivX Certified and associated logos are trademarks of DivX Inc and are used under DI WX DivX Certified to play DivX video up to HD 1080p including premium content HD license ABOUT DIVX VIDEO DivXQ is a digital video forma
25. e menu by pressing these buttons in order MUTE 1 1 9 ENTER 5 Press the A or V button to select Clone USB to TV and then press the ENTER button 6 The message Clone USB to TV is displayed Press the ENTER button 7 The TV displays one of the following messages Setting Auto Initialize In Progress Copying data to TV Completed Copy was successful Failed Copy was not successful No USB USB is not connected No File There is no file to copy on the USB device If you get a No File message check the folder on your USB device The folder name should be T MST12AKUCB 8 it you insert the USB device when the TV is on a pop up window may appear If this occurs press Exit and then continue amp Tables that list Ithe settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next page English 27 e Settings Cloned in the Hotel Menu Menu Item Cloning Support Applicable Region Hospitality Mode Yes Al SI Vendor Yes All except Brazil Power On Channel EN Yes A Power On Channel Yes A Channel Type Yes A Power On Volume EN Yes Al Power On Volume Yes A Min Volume Yes A Max Volume Yes A Power On Source Yes Al Power On Option Yes A Channel Setup N A All except Hospital Channel Editor N A Al Channel Bank Editor N A Smooovie SI and Hospital Channel Bank Service Level Yes Hospital M
26. ear panel may differ depending on the model 10 English The Remote Control 8 This remote control has Braille points on the Power Channel and Volume buttons and can be used by visually impaired customers Turns the TV on and off Press to directly access channels Press to select additional digital channels being broadcast by the same station For example to select channel 54 3 press 64 then press and 3 Adjust the volume Display the channel list on the screen Display the main on screen menu Quickly select frequently used functions Select on screen menu items and change menu values Return to the previous menu SLEEP Sets the Sleep Timer amp Turns the 3D image on or off Not available CC Controls the caption decoder E See Lo PRE CH I Return to the previous channel c SOURCE Display and select the available video sources Cut off the sound temporarily Change channels HOME Only used in Widget TV Displays My Contents Watch TV and Source icons on the TV screen Press to display channel and TV information on the TV screen Exit the menu Buttons used in Channel list Media Play menu etc GG button Enter the hour your want the TV to turn on Use these buttons in the Media Play and Anynet modes English 1 1 Installing batteries Battery size AAA Match the polarity of the batteries t
27. ed priorities to the jacks of the RJP 1 is the highest priority and 3 is the lowest When a guest connects external sources to the RJP jacks the TV will automatically switch between sources based on the priority you have assigned them in the Menu For example lets say AV is set to 1 and HDMI to 2 If a guest has attached a device to the HDMI jack and then plugs a device into the AV jack the TV automatically switches to the device plugged into the AV jack the jack with the higher priority Note that a guest can also switch between devices manually by pushing a button on the RJP You can connect the RJP to HDMI 1 2 or 8 or AV 1 or 2 The RJP can be returned to the factory default settings by pressing the A V and HDMI buttons simultaneously for 10 seconds All LEDs blink 5 times acknowledging that this has been finished The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart If the guest then touches another source button the TV will change to the selected source and the corresponding LED will be lit After an RJP Reset or a TV Power OFF ON it takes approximately 10 seconds for the TV and the RJP to establish communication The following table shows the approximate time in seconds it takes to switch from the TV to an input source based on assigned or
28. er On Volume 20 and Max Volume 90 then the Sound Bar s Power On Volume 10 and Max Volume 45 Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them in the Enter New PIN fields Re enter the same 4 digits in the Confirm New PIN fields When the Confirm screen disappears select Close The TV has memorized your new PIN How to watch a restricted program or movie If the TV is tuned to a restricted program or movie the Program Rating Lock will block it The screen will go blank and a popup message appears Enter the PIN to unblock the program or movie using your remote 8 f you forget the PIN code press the remote control buttons in the following sequence in Standby mode MUTEnK 8 2 4 5 power on This resets the PIN to 0 0 0 0 34 English D Channel Bank Editor Smoovie TV Only The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank SMOOVIE remotes have installable Bank Cards which correspond to the channel banks in the Channel Bank Editor The remotes only allow access to channels in the channel bank that correspond to the installed card Consequently the channels a guest can access depend on the Bank Card installed in their SMOOVIE remote Setting the CH Bank Editor under Stand alone Mode 1
29. g the TV A0 8l SBB Or S IB cisci epar io Dried rupi fent ER ER foit editi ser ied 14 e Connecting the Bathroom Speakets 3i peperere rea HG E EAE ERE ERE HERE Ra pea Ce Eu ie ia cha Feb ariun i ensi 17 Connecting the RJP Remote Jack Pack eene nnne ener nn eren nnns 18 Setting th Hotel Option Data a ertet etre t ep he he e dra dati o aede reta pereunt 20 v Installirigithe Vall MOUEI zs eene ores er pda i pepe visis vrbe depen pO Qn teda NS 40 Anti theft Kensington EOCK sisse rt eim i eee etapa e ek e t oce b dre iR Ras eR E eine ec ec 42 e Specifications e Display Resolution LAMB II m Symbols Used in this Manual Q Indicates that you can press the One Touch Button TOOLS button on the remote control to use this function English 3 Accessories Please make sure the following items are included with your LED TV If any items are missing contact your dealer The items color and shape may vary depending on the model The parts for the stand are listed under Stand Components on the following page e Remote Control AA59 00817A amp Batteries AAA x 2 e Hotel Mount Kit Owners Instructions Power Cord e Safety Guide Quick Setup Guide e Data Cable BN39 00865B Not available in all locations 4 EA M4 X L12 e Security Screws e HOLDER RING 46 2ea 55 4ea Requires 5 32 tamper resistant hex wrench Sold separately 4 English Installing t
30. ges not stationary patterns or dark bars On LED models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats used for viewing Uneven LED aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center Transportation to and from the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specifie
31. glish Menu Item Cloning Support Applicable Region Hospitality Logo Yes All Hospitality Logo DL N A All Logo Display Time Yes All Clone TV to USB N A All Clone USB to TV N A All Setting Auto Initialize Yes All SIRCH Update Time Yes All except Brazil ASIA_READY SIRCH Update Immediate Yes All except Brazil ASIA_READY Manual SIRCH N A All except Brazil ASIA_READY SIRCH Channel Yes All except Brazil ASIA_READY SIRCH Version N A All except Brazil ASIA_READY SIRCH Group ID No US REACH Yes All except Brazil ASIA_READY IPG Room Type No Guestek CAS Yes US and US Hsopital PI AES Data N A US and US Hsopital Self Diagnosis N A A PI AES Log Yes US and US Hsopital View PI AES Log N A US and US Hsopital SW Upgrade N A A Service Pattern Yes A ATV Cable AGC Gain Yes US and US Hsopital DTV OpenCable AGC Gain Yes US and US Hsopital TV Reset N A A English 29 H Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TV This is useful where there is more than one TV in a location You can control up to 10 TVs each with a different ID code with one remote ID numbers are displayed on each TV s OSD The Initial ID code for each TV is 0 You can set and reset the ID code in Analog TV mode or PC mode Not available in DTV mode You can set the ID code to any digit from 0 to 9 To seta
32. he LED TV Stand The 32 and larger LED TVs have swivel stands You can set these stands so that the TVs swivel 20 degrees left and right 60 degrees left and right or 90 degrees left and right See page 7 Components When installing the stand use the provided components and parts 1EA o x8 M4 X L12 em x8 M4 X L10 e Stand Guide Stand e Screws Stand shape is depending on the model o p mmo M X L12 7 or 8 m x4 M4 XLIO I 1 amp AS amp Place a soft cloth over the table to protect the TV and then LI LI LI I DO NOTUSE QONOTUSE DO NOTUSE place the TV on the cloth screen side down CHEMICALS GREASE OIL SN Insert the Stand Guide into the slot of TV bottom side Side View Correct assembly Incorrect assembly Gm x4 M4 X L12 D jm x4 M4 X L12 SECURITY NOTE Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them e Make sure that at least two people lift and move the TV When connecting the stand lay the product down on a soft surface with the screen facing down and then fasten the Screws English 5 D Hotel Mount Kit Bolt Nut Short Bolt 2EA Long Bolt 2EA Nut 2EA Washer 2EA Affix the stand to a flat surface such as a dresser top desk top or entertainment center as shown 6 English Asse
33. he PR PB and Y jacks on your component devices DVD are sometimes labeled Y B Y and R Y or Y Cb and Cr For AV devices connect RCA audio cables not supplied to R AUDIO L on the rear of the TV set and the other ends to corresponding audio out jacks on an external device When your are connecting a composite AV device to AV IN1 Y Video connect the video cable Yellow to the AV IN1 Y VIDEO jack Green Yellow English 9 EX LINK Connect this jack to the jack on the optional RJP Remote Jack Pack This will allow you to connect external devices Camcoder PC DVD players etc easily Q DIGITAL AUDIO OUT OPTICAL Connects to a Digital Audio component DATA Used to support data communication between the TV and the SBB or STB Connects using RJ 12 TV type plugs LAN Connect to a wired LAN using CAT 6 or CAT 7 cable USB HDD 1 0A CLONING Connector for software upgrades and Media Play etc Service connection B ANT IN AIR CABLE To view television channels correctly the TV must receive a signal from one of the following sources An outdoor antenna A cable television system A satellite receiver Caution of the cover jack N CAUTION The cover jack is for use by qualified service personnel only To reduce the risk of electric shock or fire hazard do not use the cover jack unless you are qualified to do so TV Rear Panel Cover jack 9i The r
34. ide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock i These are general instructions For exact instructions see the User manual supplied with the locking device The locking device has to be purchased separately i The location of the Kensington slot may be different depending on the TV model 42 English Specifications Display Resolution 1920 x 1080 Environmental Considerations Operating Temperature 50 F to 104 F 10 C to 40 C Operating Humidity 10 to 80 non condensing Storage Temperature 4 F to 118 F 20 C to 45 C Storage Humidity 5 to 95 non condensing Stand Swivel Left Right 20 20 Model Name HG32NB690 HG40NB690 Screen Size 32 Class 40 Class Diagonal 31 5 measured diagonally 40 0 measured diagonally Sound Output Dimensions WxDxH Body 29 3 x 1 9 x 17 4 inches 36 5 x 1 9 x 21 4 inches 743 8 x 49 5 x 441 7 mm 928 2 x 49 6 x 543 8 mm With stand 29 3 x 7 5 x 19 9 inches 36 5 x 9 x 24 1 inches 743 8 x 191 7 x 504 5 mm 928 2 x 227 7 x 612 0 mm Weight Without Stand 12 3 lb 5 6 kg 20 5 Ib 9 3 Kg With Stand 15 9 lb 7 2 kg 26 8 Ib 12 2 Kg Model Name HG46NB690 HG55NB690 Screen Size 46 Class 55 Class Diagonal 45 9 measured diagonally 54 6 measured diagonally Sound Outpu
35. ions for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer i Install the TV close to the wall so that it does not fall Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV Untie the string or cable before moving the TV 40 English Wall Mount Kit Specifications VESA i The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor If you are attaching the wall mount to building materials other than plaster board contact your nearest dealer If installed on a ceiling or slanted wall the TV may fall and cause severe personal injury NOTE Standard dimensions for wall mount kits are shown in the table below Samsung wall mount kits contain a detailed installation manual All parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too firmly This may damage the product or
36. itality found Logo option is off even if the logo image has been loaded into the TV Hospitality Mode Standalone Network Si Vendor OFF Widget Power On Service Channel MyChannel Menu 08D e Hospitality Logo This option lets you choose whether the Hospitality Logo image is displayed or not The Initial value is OFF This Can be set to OFF or ON When set to ON the Logo Download and Logo Time Display menu items become accessible Logo Download This option lets you download the logo image to the TV s memory from a USB device A wait message appears while the image is being copied to the TV A completed message appears when the copy operation finishes successfully The word failed appears if the copy operation was unsuccessful No USB appears if no USB device is connected No File appears if there is no file to copy on the USB device or the file is in the wrong format must be a BMP file If No File appears and there is a logo file on the USB device check the file format LogoFile Format The TV supports only BMP and AVI format The file name must be samsung bmp or samsung avi The maximum resolution of the BMP format is 1280 x 720 The maximum file size for AVI format is 50MB The TV does not change the size or scale of the image 26 English HH USB Cloning The USB Cloning function lets you download user configured settings Picture Sound Input Channel Setup and
37. l when in Stand Alone Hospitality mode Channel Type CATV e Select channel band CATV analog cable band Power On Volume EN Last Saved Set the default volume values which will be applied when the TV is turned on e User Defined Lets you set the Power On Volume manually See Power On Volume below Last Saved When the TV is turned on it returns to the volume that had been set when the power had been turned off Power On Volume TV will switch on at this Volume Level in Stand Alone Hospitality mode Min Volume Minimum Volume Level user can set in Stand Alone Hospitality mode Max Volume 100 Maximum Volume Level user can set in Stand Alone Hospitality mode Power On Source Select the input source the TV displays when it is turned on Power On Option Last Option Determines the TV s state when power returns after a power failure or after you have unplugged the TV and then plugged it in again e Last Option Returns to its last Power state If it was in Stand by it returns to Stand by If it was on it turns on e Power ON When the power returns the TV turns on e Standby When the power returns the TV enters the Standby mode Channel Channel Setup Gives you direct immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program Antenna selection etc Channel Editor The Channel Editor lets you edit the channels sto
38. lter No Signal Power Off HDMI Black Level System Auto Power Off Film Mode Auto Protection Time Auto Motion Plus Change PIN Picture O General Apply Picture Mode Game Mode Reset Picture BD Wise Menu Transparency Sound Feedback Boot Logo Anynet HDMI CEC Anynet HDMI CEC Auto Turn Off Divx Video On Demand English 3 1 D Hotel Plug amp Play The Hotel Plug amp Play function which automatically performs the Hotel mode selection Country Setup Clock Setup and Picture Mode Setup runs once when power is first turned ON Setup also runs automatically after you have executed a Service Reset e Ul Scenario If you change the country If you select of the Current Location Change When Local set is changed TV Wil restart automatically to apply it Current Localset US Vv Countries List USA If you don t change the country of the Current Location The TV is automatically turned off and on If you select Standalone Setup Standalone Only If you select Standalone Setup have eed ise document arc age to egal bound hoy a Smart Hub ray ae ele qua nose toe poten dred Ra Time Zone Eastern M Espa ol Select Clock Mode DST and your Time Zone Select your language Your TV ls now ready to use Auto ture Mode Standard M Network type Wireless a Wireless network Select Connected to a WIRED Network Not
39. mbling the swivel 32 inch TVs or larger WARNING If you configure the TV to swivel you must attach it securely to the floor a desk a dresser top etc as described in the installation instructions The 32 and larger LED TVs have swivel stands You can configure these stands so that the TVs swivel 20 degrees left and right 60 degrees left and right or 90 degrees left and right using the BRACKET HOLDER SWIVEL 20 swivel To configure the TV so that it swivels 20 left and right insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20 Then fix the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left 60 swivel To configure the TV so that it swivels 60 left and right insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60 Then fix the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left li 90 swivel To configure the TV so that it swivels 90 left and right remove the Bracket Holder Swivel and then screw the three supplied screws into the stand as shown to the left English 7 Using the TV s Controller The color and shape of the TV Controller may vary depending on the model The TV s Controller a small joy stick like button on the bottom right side of the TV lets you control the TV without the remote control
40. msung Sound Bar to a compatible Samsung hospitality TV using a single HDMI cable guests can listen to the TV s sound through the Sound Bar Models supporting the ARC function are listed below e Sound Bars HW F350 F3553 FM35 F450 FM45 FM45C F550 F55 1 FM55 FM55C F750 F751 e Setting the Sound Bars to Hotel Mode 1 Set the following Hotel menu options Hotel option gt External Device gt Sound Bar Out On Hotel option gt Power On gt Power On Volume EN User Defined Hotel option gt Power On gt Power On Volume gt Set greater than 0 Hotel option gt Power On gt Max Volume gt Set greater than 0 2 Connect an HDMI cable from the HDMI OUT jack on the back of Sound Bar to the HDMI4 port supporting ARC on the hospitality TV 3 After the Sound Bar is connected to the hospitality TV when the TV turns on the Sound Bar automatically detects the TV and then automatically switches to Hotel Mode Sound Bar Hotel mode functional characteristics e Power On Off is synchronized with the TV e HDMI_CEC defaults to On e Functions through the HDMI OUT port only e Disables the Input mode key on the VFD to prevent unexpected audio source changes e Acquires adjustable Power On and Max Volume settings from the TV s Hotel option menu The Sound Bar s Power On Volume and Max Volume values however are 12 of the Power On Volume and Max Volume settings in the TV s Hotel option menu Example If the TV s Pow
41. nsions prior to performing installation of your TV Not responsible for typographical or printed errors 2011 Samsung Electronics America Inc 46 English NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the i Important Warranty Information Regarding Television Format Viewing See the warranty card for more information on warranty terms Wide screen format LED Displays 16 9 the aspect ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stationary graphics and images on screen such as the dark sidebars on nonexpanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle but permanent burned in ghost images in the LED picture To avoid this vary the programming and images and primarily display full screen moving ima
42. nynet Return Source Power On Src Select the Return Source for Guest Link RJP HDMI CEC Determines the Sub AMP operation mode e 0 Turns the Sub AMP function off PWM off e 1 Determines the Sub volume according to the main volume control pes SUD AMMOS E That is the sub volume is determined by the Power On Volume the Min Volume and the Max Volume e 2 Determines the volume according to the bathroom control panel setting Sub AMP Volume 6 Sub AMP Volume level at power on initial condition Adjusts the brightness of the TV to reduce power consumption e Off Turns off the energy saving function Eco Solution Energy Saving Off e Low Sets the TV to low energy saving mode e Medium Sets the TV to medium energy saving mode High Sets the TV to high energy saving mode 22 English Menu Item initial Value Description Welcome Message OFF Display the Welcome Message for 5 seconds when the TV turns On Edit Welcome Edit the Welcome Message Message Turns the Hospitality logo feature on off Select from Off BMP AVI or Both When you Hospitality Logo OFF select BMP AVI or Both you select the file to use and turn the logo feature on The Logo Logo is shown during the initial turn on for the amount of time set in Logo Display Time Message Downloads the Hospitality logo Hospitality L Hospitality logo file requirements ospi d
43. o the symbols in the battery compartment After you have installed the batteries use a screwdriver to screw in the screw that holds the battery cover closed amp NOTE Use the remote control within 23 33 feet of the TV e Bright light may affect the performance of the remote control Avoid using near fluorescent lights or neon signs e The color and shape of the remote may vary depending on the model Connecting to the Network You can set up your TV so that it can access the SMART TV applications through your local area network LAN using a wired or wireless connection i After you have physically connected your TV to your network you must configure the network connection to complete the process You can configure the connection during the Initial Setup process see page 31 or after the Initial Setup process through the TV s menu Network Connection Wireless You can connect your TV to your local area network LAN through a standard wireless router or modem Wireless IP Router or Modem router having DHCP Server The LAN Port on the Wall LAN Cable Not Supplied 1 2 English This TV supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 11n When you play video over a network connection the video may not play smoothly Most wireless network systems incorporate a security system that requires devices that access the network through an acce
44. odels Only Mixed Channel Map Yes EU Dynamic SI Yes US and US Hsopital Channel Rescan Message Yes EU and EU Hospital Pan Euro MHEG Yes EU and EU Hospital Channel Auto Store N A Hospital Models Only Mychannel En Yes EU and EU Hospital Genre Editor N A EU and EU Hospital Picture Menu Lock Yes Al Menu Display Yes Al Channel Menu Display Yes ASIA Models only Panel Button Lock Yes Al Mute On CC Yes US Hsopital Only Subtitle Auto On Yes EU and EU Hospital SW Clock Yes EU and EU Hospital Local Time Yes EU and EU Hospital Time Format Yes EU and EU Hospital CLOCK Normal Dim Yes EU CLOCK Standby Dim Yes EU Music Mode AV Yes Al Music Mode PC Yes A Music Mode Comp Yes A Music Mode Backlight Yes A 7610 Priority AV Yes A 7610 Priority PC Yes A 7610 Priority HDMI Yes A 7610 AV Option Yes A RJP HDMI Option Yes A HDMI Music Mode Yes US and US Hsopital Sound Bar Out Yes A Video Out Yes ASIA Models only USB Media Mode Yes US and EU External Source Banner Yes A Auto Source Yes A Anynet Return Source Yes All Models except Hospital Sub Amp Mode Yes All except US Sub Amp Volume Yes All except US Pillow Speaker Type Yes Hospital Models Only Speaker Select Yes Hospital Models Only Pillow Volume Yes Hospital Models Only Energy Saving Yes All Energy Saving Timer Yes EU Welcome Message Yes All Edit Welcome Message N A All 28 En
45. operation View PI AES Log Display Save Pro idiom AES log SW UPGRADE Lets you upgrade the TV SW with a USB memory stick Refer to page 33 34 Sarvic Pattern OFF Lets you check the state of the TV picture by displaying picture test patterns Press the Menu button turn off the test patterns and exit ATV Cable Lets you control the AGC gain of the analog cable channels Don t change the default Default AGC Gain value unless problems occur DTV Open Cable Lets you control the AGC gain of the digital cable channels Don t change the default Default AGC Gain value unless problems occur TV Reset Returns all settings on the TV to their factory defaults REACH Remote Enhanced Active Control for Hospitality is a professional interactive remote controller that lets you deliver TV through R firmware updates cloning data channel maping changes S LYNK REACH contents and TICKER contents F DTV to several hundred hospital ity TVs simultaneously The REACH functions are avalible only in standalone mode The REACH Server is sold separately Refer to the REACH server manual enclosed with the REACH server product for more operating information 24 English D Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on Welcome message settings are in the Hotel Option Menu Set Welcome Message to ON to display the message when the TV is powered on Edit Welcome Message
46. otline at 1 866 894 0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV When the software is upgraded video and audio settings you have made will return to their default factory settings We recommend you clone the hotel settings so that you can easily reset them after the upgrade To upgrade the TV s software follow these steps 1 Insert a USB drive containing the SW upgrade into the USB port on the side of the TV 2 Press the MENU button to display the menu Press the A or V button to select Support and then press the ENTER button English 33 3 Press the A or V button to select SW Upgrade and then press the ENTER button The message Scanning for USB This may take more than 1min is displayed 4 The message Upgrade version XXXX to version XXXX The system will be ICE reset after upgrade is displayed Press the 4 or gt to select the OK and then press the ENTER button EE Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied The TV will turn off and turn on automatically after completing the SW upgrade Please check the SW version after the upgrades are complete D Sound Bar e Samsung Sound Bars and Hospitality TVs in 2013 Samsung Sound Bars and hospitality TVs support the ARC feature in HDMI 1 4 If you connect a compatible Sa
47. red in the TV s memory Using Channel Editor you can Change the channel numbers and names and sort the channels in your desired channel number order Apply the video mute to channels you select The vido mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen The Channel Editor also lets you view information about each channel easily without your having to display each channel directly Dynamic SI ON ON Check the DTV Program channel number DTV channel editor is inaccessible OFF There is no check of the DTV Program channel number DTV channel editor is accessible but additional channel program number update is not supported Menu OSD Picture Menu Lock OFF Enable or disable the Picture Menu Menu Display ON e ON Main Menu displays e OFF Main Menu does not display Operation Panel Button Lock Unlock Turns the front panel Local key operations on off Unlock Unlocks all panel keys e Lock Locks all panel keys e OnlyPower Locks all panel keys buttons except the Power e Menu Source Locks Menu and Source Clock Local Time Manual Select the way to update clock data Use clock data from a DTV channel to set the clock automatically or set the clock manually when the TV is in stand alone mode English 2 1 Menu Item initial Value Description Music Mode AV OFF Allows m
48. rom Standalone to Interactive or from Interactive to Standalone 4 Press the Return or Menu button on the remote The entire menu re appears with your selection displayed in the Hospitality Mode field S After you have set the values in one TV you can clone those values to multiple TVs See USB Cloning on page 26 20 English H Menu Items To Enter this menu Press the MUTE 1 1 9 ENTER buttons in order or Power Off and unplug if you have changed SI Vendor and then turn on again Any To exit from this menu Power Off changes you made are saved Menu Item initial Value Description Hospitality Mode Hospitality Mode Standalone Select the Hospitality mode e Standalone mode TV works alone without an SI STB or SBB e Interactive mode TV works with an SI STB or SBB SI Vendor SI Vendor OFF e Interactive mode Samsung OCC MTI Nstreams Enseo Cardinal Guestek Seachange BDC Innvne e Standalone mode Smoovie Power On Power On Channel EN User Defined Set the default values that will be applied when the TV is turned on e User Defined Lets you set Power On Channel and Channel Type manually See Power On Channel and Channel Type below e Last Saved If you select this item when the TV is turned on it displays the channel it was displaying when it was turned off Power On Channel When the TV is turned on it switches automatically to this channe
49. ss point or AP typically a wireless IP Sharer router or modem to transmit an encrypted security code called an access key Your TV is compatible with the following security protocols e Authentication Mode OPEN SHARED WPAPSK WPA2PSK e Encryption Type WEP TKIP AES In compliance with the newest Wi Fi certification specifications Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802 11n mode Network Connection Wired There are three main ways to connect your TV to your network using cable depending on your network setup They are illustrated below The Modem Port on the Wall External Modem TV Rear Panel ADSL VDSL Cable TV T Elp mmm Modem Cable Not Supplied LAN Cable Not Supplied The Modem Port on the Wall External Modem IP Router that has a TV Rear Pane ADSL VDSL Cable TV DHCP Server f p p MESSE E Bers 6 Modem Cable LAN Cable LAN Cable Not Supplied Not Supplied Not Supplied The LAN Port on the Wall TV Rear Panel LAN Cable Not Supplied The TV does not support network speeds of 10Mbps or less i Use Cat 6 or CAT 7 STP Type cable for the connection Shielded Twisted Pair English 13 Connecting the TV to an SBB or STB TV Rear Panel ETH MODEM Data Cable a 1 Connect the DATA jack of the TV to the ET
50. ssing the Controller With the Function menu visible open the Source screen 3 by pushing the Controller to the right The Source screen appears To select a Source move the Controller back and forth When the source you want is highlighted press the Controller With the Function menu visible select Power Off by pulling the Controller forwards and then press the Controller To close the Menu SMART HUB or Source press the Controller for more than 1 second Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power To be safe and to decrease power consumption do not leave your TV in standby mode for long periods of time when you are away on vacation for example It is best to unplug the power cord 8 English The Connection Panel SIDE DATA COMPONENT E HDMIIN4 AVIN Eo ARC zeja Ka He LAN DIGITAL r 1 aunio out OPTICAL DVI AUDIO IN if o V J J e fs el T AUDIO OUT M cu OM e gt VARIABLE B AUDIO OUT foj 3 HDMI e z i Whenever you connect an external device to your TV make sure that power on the TV and the device is turned off When connecting an external device match the color of the connection terminal to the cable HDMI IN 1 DVI 2 3 4 ARC Connects to the HDMI jack of a device with an HDMI o
51. t Dimensions WxDxH Body 41 7 x 1 9 x 24 3 inches 49 2 x 1 9 x 28 5 inches 1059 8 x 49 6 x 617 7 mm 1250 4 x 48 8 x 724 6 mm With stand 41 7 x 9 x 27 inches 49 2 x 9 x 31 2 inches 1059 8 x 227 7 x 686 2 mm 1250 4 x 227 7 x 793 7 mm Weight Without Stand 26 0 Ib 11 8 Kg 37 9 Ib 17 2 Kg With Stand 32 4 Ib 14 7 Kg 44 3 Ib 20 1 Kg 8 Design and specifications are subject to change without prior notice i This device is a Class B digital apparatus i For power supply and power consumption information refer to the label attached to the product English 43 Display Resolution When you use your TV as a computer monitor you can also select one of the standard resolutions listed in the Resolution column The TV will automatically adjust to the resolution you choose Horizontal Frequenc Vertical Frequenc Pixel Clock Frequenc Sync Polari Mode Resolution KHz a Y e 4 MH2 q H V ty IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832x 624 49 726 74 551 57 284 1152 x 870 68 681 75 062 100 000 640 x 480 31 469 59 940 25 175 640 x 480 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 1024 x 768 48 363 60 004 65 000 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 VESA DMT 1152 x 8
52. t created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 H Lj mi The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Open Source License Notice In the case of using open source software Open Source Licenses are available on the product menu Open Source License Notice is written only English English 47 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Samsung Hospitality Hotline 866 894 0524 Web site http www samsung com us business HG690 ZA 00
53. t exist General Steps for Using the Channel Editor in Stand alone Mode Step Broad Outline 1 Run Channel Auto Store in the Hotel Option Menu 2 Enter Channel Editor in the Hotel Option Menu 3 On a piece of paper compile a list of channels you want to have arranged in the order you want 4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled 5 Press the EXIT or RETURN Button to exit For a detailed explanation of how Channel Editer works see pages 34 through 36 36 English The picture below shows a sample Channel Editor screen Channel an2 ET cw an3 mA r 104 CWDTV an4 ann HBO ans mAir 11 1 HBO DTV mne DI 12 NBC an7 ABC mir 12 1 NBC DTV CEA ABC a013 CT uns FOX mB 14 CNN BAr 8 1 FOX DTV BAI 15 Cable Cable mB 16 TNT E Delete Select All E Video MuteOn i Information Page C Select Tools gt Return IA Indicates an analog channel Channels without an EX are digital channels The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel Editor functions Using the remote s up or down arrow key highlight the channel that you want edit To edit more than one channel move the highlight to a channel and then press the ENTERC key A check will appear in the check box next to the channel Repeat for each channel you want to edit To delete the channel or channels you selec
54. ted from the channel list press the red button on the remote To delete two or more channels simultaneously selecte multiple channels in Step 1 and then press the red button on the remote Q Press the green button on the remote to select all channels To apply the video mute press the yellow button on the remote To apply the video mute to two or more channels simultaneously selecte multiple channels in Step 1 and then press the yellow button on the remote Q To view information about a channel including video mute set up press the INFO button on the remote Q Press the TOOLS button on the remote to rename a channel or change the channel number See page 35 Channel Editor Functions and Remote Buttons EX Red Delete Deletes a channel from the channel list E Green Select All Selects all channels at once Yellow Deselect All Deselects all channels at once I Blue Video Mute On Off Turns the Video Mute On Off Page Moves to next or previous page 1 Information Display details of the selected program X Tools Displays the option menu 5 Return Returns to the previous step or exits English 3 7 When you press the TOOLS button the following menu is available Channel Rename Channel Edit Channel Number Information E Delete SelectAll M Video Mute On i Information Page Select FJ Tools 9 Return Edit Channel Number Edit Country Use Edit Channel Number to change the
55. tereo cable 1 6 English Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following manner Connecting through the Variable Output available without an external amplifier TV Rear Panel Z lt E Volume Contro Box VARIABLE OLCTRL AUDIO OUT i 1 Speaker 1 Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel Speaker Speaker 1 N C 2 Connect the VOL CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel The maximum speaker output is 4W 8Q The VARIABLE AUDIO OUT port supports MONO sound out only Installing the Volume Control If you configure the Volume Control Box as shown in the figure you can control the volume of the bathroom speakers The jack that connects the Volume Control Box to the TV is a 3 5mm normal Phone jack Volume Control Box switch is a Tact switch Setting the Sub AMP Mode 0 Turns the Sub AMP function off PWM off 1 Sets the Sub volume according to the main volume control That is the sub volume is determined by the Power On Volume the Min Volume and the Max Volume values set in the Hotel Mode menu 2 Determines the volume according to the bathroom control panel setting e Variable Output Port Specifications Speaker Wire Use speaker cable no more than 82 feet 25m in length Volume Control Box
56. u set nearly all of the menu values on your hospitality TVs to the same standard settings If you allow guests access to the guest side menus for example the Picture menu they can change the settings in those menus so they are no longer standard If you set the Setting Auto Initialize function to on the TV automatically restores initializes any guest side menu values to the cloned standard values when the TV is turned off and then turned on again Note that Setting Auto Initialize works on cloned guest side menu values only Settings which have not been cloned are ignored The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to on Menu Menu Item Menu Menu Item Picture Mode Sound Mode Backlight Sound Effeci Contrast SRS TruSurround Brightness SRS TruDialog Sharpness Equalizer Color Speaker Settings Tint G R Speaker Select Picture Size Sound Auto Volume Picture Size SoundShare Settings Position TV Installation Type PIP Digital Audio Out Advanced Settings Audio Format Dynamic Contrast Audio Delay Black Tone Reset Sound Flesh Tone Menu Language Picture RGB Only Mode Time Colour Space Clock White Balance Sleep Timer 10p White Balance Wake up Timer Gamma Device Manager Expert Pattern Keyboard Settings Motion Lighting Mouse Settings Picture Opitons Eco Solution Colour Tone Energy Saving Digital Clean View Eco Sensor MPEG Noise Fi
57. u to mount the TV on a wall For detailed information on installing the wall mount see the instructions provided with the wall mount Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own Securing the TV to the Wall A Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do not hang on or destabilize the TV Doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided in the Safety Flyer included with your TV For added stability and safety you can purchase and install the anti fall device as described below To Prevent the TV from Falling i TV Holder Kits are sold separately To purchase a TV Holder Kit contact Samsung Customer Care 1 Insert the screws into the wall brackets and firmly fasten them to the wall Make sure the screws are firmly fixed to the wall We strongly recommend you drive the screws into a stud 2 Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on theback of the TV 3 Connect the brackets on the TV and the brackets on the wall with a strong string or cable and then tie the string or cable tighrly to the brackets 3 Verify all connections are properly secured Periodically check the connect
58. usic output from an mp3 audio player connected to an AV Input Source on the TV When on you can hear sound from the player through the TV whether there is a video signal or not Also mutes the video so the TV does not display a picture when a guest is playing music The TV s backlight however remains on Music Mode Music Mode Comp OFF To get music output from an mp3 audio player through a Component Input Source When on you can hear sound from the player through the TV even if there is no video Signal The TV s backlight however remains on If a guest adds a video signal video displays normally Music Mode Backlight OFF When set to Off the TV s backlight is turned off entirely when a guest uses the Music mode To save energy set to Off 7610 Priority AV Lets you set the priority of the 7610 RJP AV jack You can choose 1 2 or 3 with 1 being the highest and 3 the lowest The TV automatically displays the source with the higher priority For example lets say AV is set to 1 and HDMI is set to 2 If a guest has attached a device to the HDMI jack and then plugs a device into the AV jack the TV will automatically Switch to the device plugged into the AV jack the jack with the higher priority Note that a guest can also switch devices manually by pushing a button on the 7610 RJP 7610 Priority HDMI External Device Lets you set the priority of the 7610 RJP HDMI jack You can choose 1 2 or 8 with 1
59. utput No sound connection is needed for an HDMI to HDMI connection HDMI connections carry both audio and video amp Use the HDMI IN 1 DVI jack for a DVI connection to an external device Use a DVI to HDMI cable or DVI HDMI adapter DVI to HDMI for the video connection and the PC DVI AUDIO IN jacks for audio DVI AUDIO IN Connects to the audio output jack on your PC AUDIO OUT Connects to the audio input jacks on an Amplifier Home Theater Q VARIABLE AUDIO OUT Used for the audio output to the Bathroom speaker Connect the Bathroom Wall Box and the Variable port RCA Q VOL CTRL Used to control the volume of the Bathroom speaker Connect the Bathroom Wall Box and the VOLCTRL port Q COMPONENT IN AV IN AV IN2 Use to connect to Component video audio devices such as DVD players and AV Composite devices such as VCRs Connect audio cables to R AUDIO L on your TV and the other ends to corresponding audio out jacks on A V or Component devices The COMPONENT IN jack is also used as the VIDEO 1 jack Connect component video cables not supplied to the component jacks Pr Pe Y on the rear of your TV and the other ends to corresponding component video out jacks on a DVD player Match the colors on the jacks and cables f you want to connect both a Set Top Box and a DVD player you should connect the Set Top Box to the DVD and connect the DVD to the component jacks PR PB Y on your TV T

Download Pdf Manuals

Related Search

Related Contents

manual do produto      Philips Cineos Digital Wireless Headphone SHD9100  LG TEC Elite Quick Start Guide final  activePDF WebGrabber  

Copyright © All rights reserved. Failed to retrieve file