AVerMedia PL50
Contents
1. i e m me TT T e Connect an Amplified Speaker Plug a 3 5mm plug amplified speaker to port Only the audio from the video playback is supported We recommend connecting an amplified speaker to the Audio output port Take caution when using earphones Adjust the volume down on the remote to prevent hearing damage due to loudness C Amplified Speaker 9 LIST wu CC wee tHe eue Connect to a Microscope Connect the AVerVision PL50 to a microscope enables you to examine microscopic objects on a big screen 1 Change the image display mode to Microscope Press MENU gt select IMAGE tab gt select MODE gt select microscope and press 2 Aim the camera head at the farthest point and press AUTO FOCUS 3 Twist the camera lens counterclockwise to remove and unhook the latch ENGLISH 4 Adjust the focus of the microscope 5 Select the appropriate rubber coupler size for the microscope eyepiece and insert it in the microscope adapter 6 Remove the microscope eyepiece from the microscope and connect it to the microscope adapter with the rubber coupler inserted Fasten the 3 bolts until the adapter secures the eyepiece N For the eyepiece we suggest using 15 5mm eye relief or higher 7 Attach the microscope adapter to2. 30 Transfer Captured Images Videos to a computer 30 Technical Specifications 31 E E ER 31 Bi 31 xl gg E E 31 A NTE 31 CN 31 mem E 32 External Storage orreri REEE EEEREN E 32 RS 232 Diagram 32 RS 232 Cable Specifications sess 33 RS 232 Transmission Specifications 33 RS 232 Communication Format eene 33 ENGLISH RS 232 Send Command Table eese 33 RS 232 Get Command Table 38 TroubleshoOlllig 39 Limited Warrant eere erre unn nenas 40 ENGLISH Package Contents Make sure the following items are included in the package eO E 5 g Gi ex pO eo Remote Control 4 batterie
3. E UMEN aif SD Card Insert a USB Flash Drive Make sure to set the USB Flash Drive switch see fig 1 2 1 to the left before inserting a USB flash drive AVerVision PL50 can support USB flash drive from 2GB to 64GB FAT PE ery eee a wi Ge 2695 6 Quy Camo T Il j USE Flash Drive OSD MENU There are 4 tabs on the OSD menu IMAGE PRESENTATION SETTING and SYSTEM In Playback mode you can access PLAYBACK OSD menu to enable the Slide Show feature and modify Slide Show interval and transition setting if desire For TV output the RESOLUTION will be disabled in SETTING menu list SETTING ANNOTATION PLAYBACK 18 Navigate the Menu and Submenu 1 Press MENU button on the remote or control panel 2 Press gt and 4 to toggle between tabs 3 Press V and A to choose a selection in the menu list 4 Press to make a selection 5 Use and 4 to adjust the setting or make selection 6 Press to enter submenu 7 Press MENU to close the OSD menu Brightness Adjust brightness level manually between 0 and 63 Contrast Adjust the contrast level manually between 0 and 255 under bright and dark environments 19 Menu Screen Function Mode Select from the various image display settings Sharp adjust the contrast along the edges making i text appear mo
4. 16 SPLIT Divide the screen into two One side SCREEN displays the live image from the built in camera and the other side displays 8 thumbnail size picture video from the memory 17 MODE Select from 6 type of modes Sharp adjust the contrast along the edges making text appear more visible Viewing the subject from 32 36 cm 16X zoom away from the camera Graphics adjust the gradient of image Viewing the subject from 32 36 cm 16X zoom away from the camera Motion increase frame rate Sufficient lighting is required when using this mode Viewing the subject from 32 36 cm 16X zoom away from the camera Microscope automatically adjust optical zoom for microscopic viewing Macro set to view when object is only 10 32cm 5X zoom away from the camera Infinite set to view when subject is from 36 cm to infinity Max 16X and further away from the camera 18 TIMER Call the Timer submenu Select to Start Pause Stop the timer countdown and set the timer duration 19 bed Playback mode Play Pause video playback 20 LAMP Turn the overhead light on off 21 BRIGHTNESS Adjust the brightness 22 DEFAULT Reset to factory default setting 23 DEL Delete the selected picture video in Playback mode Making the Connections Before making the connection make sure the power of all devices are turned off If you are not sure on where to connect simply follow the illustrated connections b
5. See the Command Table for reference Receive Device Code 1 Byte 0x53 CheckSum Code 1 Byte See the Command Table for reference Format Start Type DataLength Data CheckSum Example 0x52 0x03 0x01 0x00 0x00 0x53 0x5A Command Power Off RS 232 Send Command Table Send Format 0x52 0x03 Data 0 Data 1 Data 2 0x53 CheckSum Receive Format 0x53 0x00 0 02 72 3 0x52 CheckSum 1 CheckSum 0x0B xor 0x03 xor Data 0 xor Data 1 xor Data 2 xor 0x53 2 Receive data ok OxOB ID error 0x01 CheckSum error 0x02 Not Command 0x03 Function fail 0x04 3 0x00 4 CheckSum 0x00 xor 0x02 xor 2 xor 3 xor 0x52 Data 0 Data 1 Data POWER OFF POWER ON oe ows CONTINUOUS 0x05 0x01 0x00 Ox5f _ TIMER SET TIME 0x08 0x03 120 1 ROTATE 180 ROTATE 270 Ox IZ ENGLISH Data 2 CheckSum 0x00 0x00 0x00 0x00 0x00 VALUE 0 255 0x00 0x00 VALUE 0 EN 63 1 0x00 0x00 0x00 Function Data 0 Data 1 0x00 o 0 02 0x00 TT CONTRAST VALUE o BRIGHTNESS INCREASE 0x00 BRIGHTNESS DECREASE 0x01 BRIGHTNESS VALUE o EXPOSURE AUTO 0x00 EXPOSURE MANUAL 0x01 EXPOSURE MANUAL INCREASE 0x00 EXPOSURE MANUAL DECREASE 0x14 0x01 WHITE BALANCE AUTO 0x00 WHITE BALANCE MANUAL 0x01 WHITE BALANCE B
6. 19 RETE 21 21 White 21 puc eC TET 22 Kr 23 Se ES 2 2 ener me URN RN 23 juu T 24 MNT E 24 ete a 24 24 PU M 24 iuo c A 25 ci P 25 mite 25 P 25 ai 25 163 26 msi ETT 26 eli NECS 26 LANGUAGE 26 OUIDUEEISDISy den mage m SEMI RON 26 ze e 26 Save 27 Recall Seting ea 27 EO NIETO 27 A EE E n 27 PAY AGI TRI HER 28 T T 28 RERO TK E 28 Slide Show 28 Curtent s 28 Br E A ETT 28 29 Connecting a USB mouse 20 29 Using the Annotation Control 29 Using the AP20T Slide Switch and F button
7. ENGLISH Federal Communications Commission Statement Class A NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by tuning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer an experienced radio television technician for help Class A ITE Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use Warning This is a class A product In a domestic environmen
8. OFF YOUR WASTE EQUIPMENT FOR RECYCLING PLEASE CONTACT YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT Remote Control Battery Safety Information Store batteries in any cool amp dry place Do not dispose used batteries in domestic waste Dispose batteries at special collection points or return to stores if applies Remove the batteries if they are not in use for long period of time Battery leakage and corrosion can damage the remote control dispose batteries safely Do not mix and use old and new batteries Do not mix and use different types of batteries alkaline standard carbon zinc or rechargeable nickel cadmium not dispose batteries in a fire Do not attempt to short circuit the battery terminals ENGLISH Table of Contents Package Contents 1 Optional Accessories 1 Get Familiar with the AVerVision PL50 2 mici PANG 3 GON mig 4 REMOTE 5 Making the Connections eeee 8 Set the TV RGB Switch 8 Connect to a Monitor or LCD DLP 8 Connect to a Monitor or LCD D
9. mode press this button again to stop VISOR Call the Visor submenu Visor covers part of the presentation screen and allow presenter to reveal the material as desire In the Visor submenu the following options are available CAPTURE ON OFF select to run cancel the Visor Press to move to the next selection Shade set the opacity level of the covered area The shaded area will completely turns black when it is set to level 100 Press to move the next selection OK press for the setting to take effect If you select ON upper part of the presentation screen is slightly exposed Use the 4 amp buttons to reveal more of the covered area and OFF will close the submenu To turn off Visor press again ROTATE Rotate the image by 90 Camera mode and Playback mode MENU Open and exit the OSD menu 8 4 amp gt Pan and zoom in image above digital o gt m y N 12 zoom level in both live and playback 3 H 13 mode 4 OT Select options in OSD menu 5 i Use A amp Y to increase and decrease 6 a 17 the video playback volume 7 18 Use 435 to play the video backward S 19 and forward 8 Move the Spotlight frame and Visor 9 Screen cover 9 AUTO Adjust the focus automatically 10 FOCUS 10 ZOOM Increase
10. the AVerVision camera head Then connect it to the AVerVision and microscope For easy connection and adjustment unlock the base latch to adjust the arm angle and arm latch to adjust the arm length Microscope adapter Microscope eyepiece Setting Up AVerVision 50 This section provides useful tips on how to adjust the AVerVision PL50 to meet your needs Camera Head The camera head can turn freely at 180 to the left and right and 235 up and down If the camera head is in upright position you can also press ROTATE on the remote control twice to rotate the image in 180 145 Mechanical Arm The mechanical arm design can extend for a full A4 paper viewing Press the arm latch to extend the arm length and the base latch to fold and unfold the arm ENGLISH Unfold the Side Lights Simply follow the illustration below to unfold the side lights Press LAMP on the control panel to turn on the side lights um Infrared Sensor Aim the remote control at the infrared sensor to operate the unit ek iB gos Light Box Use the light box to view x rays films transparencies and slides Press LAMP to switch to turn on the base light N DO NOT place an object weighing more than 8kg on top of the light box DO NOT write on the l
11. 52 0x01 Data 0 0x53 CheckSum Receive Format 0x53 0x0C 0x01 ReData 0 0x52 ReCheckSum 1 1 ReCheckSum 0x0C xor 0x01 xor ReData 0 xor 0x52 CheckSum Code ReData 0 RED VALUE VALUE 0 255 BLUE VALUE VALUE 0 255 POWER STATUS 0 OFF 1 ON Function Data 0 LAMP STATUS 0 OFF 1 ON ENGLISH CheckSum ReData 0 Function Data 0 Code 0 CAMERA MODE 1 PLAYBACK MODE DISPLAY STATUS 0x06 2 PC 1 PASS THROUGH 3 PC 2 PASS THROUGH VIDEO OUTPUT FREEZE STATUS 0 OFF 1 ON BRIGHTNESS CONTRAST VALUE VALUE 0 255 LIGHT BOX STATUS ONLY AVerVision Ox0C 0x54 0 OFF 1 ON PL50 Troubleshooting This section provides many useful tips on how to solve common problems while using the AVerVision PL50 There is no picture on the presentation screen 1 Check all the connectors again as shown in this manual 2 Check on off switch of the display output device 3 Verify the setting of the display output device 4 f you are presenting from a notebook or computer through the display output device check the cable connection from computer RGB VGA output to RGB input of AVerVision PL50 and make sure AVerVision PL50 is in PC Mode 5 For HDMI display output a delay occurs while waiting for both the display device and AVerVision PL50 to sync up Wait for around 4 to 7 seconds until you see the camera image on the screen have set up the AVerVision PL50 and checked all the conne
12. DMI Output HDMI RS 232 RS 232 serial port Composite Video RCA Jack Dimension 630mm x 510mm x 505mm 4 2mm include rubber foot Folded 470mm x 510mm x 165mm 2mm include rubber foot 6 5 kg about 14 3300 Ibs External Storage Secure Digital SD Max 32GB FAT Max 64GB FAT RS 232 Diagram Connection AVerVision PL50 can be controlled using a computer or any centralized control panel through RS 232 connection woe I P opm o 2 i 2 1 e ENGLISH RS 232 Cable Specifications Make sure the RS 232 cable matches the cable specification design PC COM Port CD o 4 D 1 AVerVision RS 232 Port RXD 2 2 TXD DSUB 9P O O 3 RXD DSUB 9P 543 2 1 4 5432 1 56 5 5 SG 6 0 RIS7 cis 8a O 8 9876 RC 9 O 9876 RS 232 Transmission Specifications Start bit 1 bit Data bit 8 bit Stop bit 1 bit Parity bit None X parameter None Baud rate Communication speed 9600bps RS 232 Communication Format Send Device Code 1 Byte 0x52 Type Code 1 Byte OxOB DataLength Code 1 Byte 0x03 Data Code 1 Byte See the Command Table for reference Data Code 2 Byte See the Command Table for reference Data Code 3 Byte
13. LP Projector with HDMI interface 9 Connect to a 9 Connecting the esses 10 Connect to a Computer 10 Connect to a Computer via 11 Connect an External 11 Connect an Amplified Speaker 12 Connect to a nn 12 Setting Up AVerVision _50 14 14 Mechanic 14 Unfold the Side Lights 15 SEMSOM 15 CODED ON 16 Handling the AVerVision 50 16 Anti glare 17 External Memory 17 mson an Cad c 17 Insert a USB Flash Drive 17 OSD MENU uS MES EE 18 Navigate the Menu and 19 lure m 19 mite BR SS BREITER 19 CODI SE MENU 19 je me P H 20 20 20 PY ANN ENTM TD IT 21 PUSS
14. LUE INCREASE 0x16 0x00 WHITE BALANCE BLUE DECREASE 0x16 0x01 WHITE BALANCE RED INCREASE 0x17 0x00 WHITE BALANCE RED DECREASE 0x17 0x01 FLICKER 50Hz 0x00 FLICKER 60Hz 0x01 SPOTLIGHT OFF 0x00 SPOTLIGHT ON 0x01 SPOTLIGHT SHADE 096 dark 0x00 SPOTLIGHT SHADE 5096 dark 0x01 SPOTLIGHT SHADE 100 dark 0x02 SPOTLIGHT COLOR RED 0x00 SPOTLIGHT COLOR GREEN 0x01 Data 0 Data 1 Data CheckSum SPLITSCREEN DIR UPPER SCREEN 0x22 0x00 0x00 0x79 SPLITSCREEN DIR LOWER SCREEN 0x22 0x01 0x00 0x78 SPLITSCREEN DIR LEFT SCREEN 0x22 0x02 0x00 Ox7b C SCREEN 0x22 0x03 0x00 Ox7a STORAGE THUMB DRIVE FORMAT EMBEDDED ENGLISH Data 2 CheckSum 0x00 0x00 Function Data 0 Data 1 FORMAT SD CARD 0x01 FORMAT THUMB DRIVE 0x02 OUTPUT RESOLUTION 1920x1080 Ox2F 0x03 OUTPUT RESOLUTION 1600x1200 Ox2F 0x05 OUTPUT RESOLUTION 1024x768 Ox2F 0 01 OUTPUT RESOLUTION 1280x720 Ox2F 0x02 OUTPUT RESOLUTION 1280x1024 Ox2F 0x04 OUTPUT RESOLUTION 1280x800 Ox2F 0x06 USB CONNECT USB CAMERA 0x00 BERETS ua STORAGE 0x30 0x01 0x00 o 0x00 0x0 0x02 00 0x02 0x00 TI 0x00 0 0x02 0x03 0x04 SLIDESHOW EFFECT EFFECT 5 0x05 0x00 TI Function Data 0 Data 1 Data 0x19 0x18 0x18 oxi oxic oxic 0x13 0x12 0x10 RS 232 Get Command Table Send Format 0x
15. R WARRANTIES WITH RESPECT TO THE PRODUCT WHETHER EXPRESS IMPLIED STATUTORY OR OTHERWISE INCLUDING WITHOUT LIMITATION SATISFACTORY QUALITY COURSE OF DEALING TRADE USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS Limitation of Liability IN NO EVENT SHALL AVER BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL EXEMPLARY PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS DATA REVENUE PRODUCTION OR USE BUSINESS INTERRUPTION OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN CONNECTION WITH THIS LIMITED WARRANTY OR THE USE OR PERFORMANCE OF ANY PRODUCT WHETHER BASED ON CONTRACT OR TORT INCLUDING NEGLIGENCE OR ANY OTHER LEGAL THEORY EVEN IF AVER HAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AVER S TOTAL AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE REGARDLESS OF FORM OF ACTION SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY YOU TO AVER FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED Governing Law and Your Rights This warranty gives you specific legal rights You may also have other rights granted under state law These rights vary from state to state For warranty period please refer to the warranty card
16. ation Press to adjust the camera focus on the point where the cursor is located 4 Pen tip Transfer Captured ImageslVideos to a computer This enables you to transfer the captured image from the built in memory or SD to a computer ENGLISH The instruction below MUST be read and followed BEFORE connecting the USB cable 1 Make sure to set the USB switch to for the computer to detect AVerVision PL50 2 MUST set the USB to PC as STORAGE before connecting the USB cable 3 When MASS STORAGE appears at the lower right corner of the presentation screen you may now connect the USB cable 4 Upon connecting the USB cable the system M automatically detects the new removable disk You can now transfer the captured image s from the AVerVision PL50 built in memory to the computer hard disk Technical Specifications Image 1920x1080 1600x1200 1280x1024 1280x720 1024x768 P 1280 x 800 HDMI output HD 1080p HD 720p Image Capture 240 Frames XGA 80 Frames 5M Pixel Optics Shooting Area 400mm x 300mm 15 74 x 11 81 16X Optical Zoom 15X Digital Zoom Total 240X Power DC 12V 2A 100 240V 50 60Hz 16 8 Watts lamps off 18 Watts side lamp on 18 Watts light box on Consumption Lighting Light Source Side LED lamps x 2 Light box 329mm x 265mm 12 95 x 10 43 Input Output RGB Input 2x 15 Pins D sub VGA RGB Output 2x 15 Pins D sub VGA H
17. be in monophonic 9 Control panel Easy access to various functions 10 IR sensor Receive remote control commands ENGLISH Rear Panel 1 2 3 4 5 6 7 6 6 a Eu 8 Ww 8 9 10 11 12 13 fig 1 2 Function 1 VIDEO OUT Outputs the video signal from the AVerVision PL50 camera to a TV or video equipment 2 PC1 PC2 Input the signal from a computer or other sources and pass it through to the RGB 1 2 OUT port only Connect this port to the RGB VGA output port of a computer 3 Speaker port Connect to an amplified speaker 4 MIC port Connect a 3 5mm plug microphone The built in mic will be disabled when an external MIC is connected to this port 5 TV RGB switch TV to output display video from VIDEO OUT and RGB to RGB 1 2 and HDMI OUT ports 6 USB Flash Drive switch Switch to left lt 4 for audio video recording directly to a USB USB PC flash drive and right gt when connecting AVerVision PL50 to a computer using a USB cable 7 RS 232 Connect to the computer serial port or to any control panel or for centralized control if desire 8 DC12V port Connect the power adapter into this port 9 RGB1 RGB2 Connect the AVerVision PL50 to any display device with RGB cable 10 HDMI OUTPUT Connect the AVerVision PL50 to any display device with HDMI interface using HDMI cable 11 SD card slo
18. ctions as specified in the manual but cannot get a picture on the preferred presentation screen 1 The unit POWER button turns orange in standby mode Press the POWER button again to turn on and the LED light will turn blue 2 The default camera display resolution setting is on 1024x768 If your output device does not support this resolution no image can be projected Simply press hold the FREEZE and gt button to the change the resolution setting If your display output device is TV or any analog device please switch the TV RGB dip switch to TV The picture on the presentation screen is distorted or the image is blurry 1 Reset all changed settings if any to the original manufacturer default setting Press DEFAULT the remote or select Default in Basic tab OSD menu 2 Use the Brightness and Contrast menu functions to reduce the distortion if applicable If you discover that the image is blurry or out of focus press the Auto Focus button on the control panel or remote control There is no computer signal on presentation screen 1 Check all the cable connections among the display device AVerVision PL50 and your PC 2 Connect your PC to the AVerVision PL50 first before you power on your computer 3 For notebook repeatedly press FN F5 F8 to toggles between display modes and display the computer image on the presentation screen For different command please refer to your laptop manual The presentation scr
19. decrease the image 11 9 magnification in camera and picture playback mode 11 ZOOM Reset zoom level to 100 RESET 12 PLAYBACK View the captured picture video from the memory in 16 thumbnail images fig 1 4 Ege ius 13 PC 1 2 PC mode displays the video signal from the RGB INPUT port of AVerVision PL50 14 FREEZE Freeze live images STOP Stop video playback 15 SPOTLIGHT Call the Spotlight submenu Spotlight overlays a box frame on the presentation screen You can adjust the box size and move it around In the Spotlight submenu the following options are available ON OFF select to run cancel the Spotlight Press to move to the next selection Shade set the opacity level of the area outside the box The shaded area will completely turns black when it is set to level 100 Press to move to the next selection Color select the Spotlight frame color Press to move to the next selection AUN ooN Co co ENGLISH Name 15 SPOTLIGHT press for the setting to take effect If you select ON the frame will appear and blink use the A V 4 amp gt buttons to adjust the frame size and press to set the desired size and OFF will close the submenu SPOTLIGHT To turn off Spotlight press again
20. dification or failure to follow instructions included with the Product b misapplication of service by someone other than the manufacturer s representative c any shipment damages such claims must be made with the carrier or d any other causes that do not relate to a ENGLISH Product defect The Warranty Period of any repaired or replaced Product shall be the longer of a the original Warranty Period or b thirty 80 days from the date of delivery of the repaired or replaced product Limitations of Warranty AVer makes no warranties to any third party You are responsible for all claims damages settlements expenses and attorneys fees with respect to claims made against You as a result of Your use or misuse of the Product This warranty applies only if the Product is installed operated maintained and used in accordance with AVer specifications Specifically the warranties do not extend to any failure caused by i accident unusual physical electrical or electromagnetic stress neglect or misuse ii fluctuations in electrical power beyond AVer specifications iii use of the Product with any accessories or options not furnished by AVer or its authorized agents or iv installation alteration or repair of the Product by anyone other than AVer or its authorized agents Disclaimer of Warranty EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AVER DISCLAIMS ALL OTHE
21. een does not show the exact desktop image on my PC or Notebook after toggle from Camera to PC mode 1 Return to your PC or Notebook place the mouse on the desktop and right click choose Properties choose Setting tab click on 2 monitor and check the box Extend my Windows desktop onto this monitor 2 Then go back one more time to your PC or Notebook and place the mouse on the desktop and right click again 3 This time choose Graphics Options then Output then Intel amp Dual Display Clone and then choose Monitor Notebook 4 After you follow these steps you should be able to see the same desktop image on your PC or Notebook as well as on the presentation screen AVerVision PL50 can t detect the inserted USB flash drive Make sure the USB flash drive switch is set to the left and check if the USB flash drive is properly inserted have connected mouse AP20T and switch to playback single image preview or in camera freeze mode but still the Annotation control panel doesn t show up 1 Check the USB switch on the rear panel is set to 3 2 Make sure the resolution setting is set to the annotation supported resolution setting of either 1024 x 768 1280 x 720 or 1280 x 1024 The recorded video on MAC with the bundled software doesn t have sound Due to some limitation we recommend recording the audio directly from the MAC MIC IN port for better audio quality Limited Warrant For a period of time begi
22. elow and also refer to the user manual of the device you are connecting the AVerVision PL50 with Set the TV RGB Switch Setting The TV RGB switch determines the display output selection Switch it to RGB right to output signal using RGB HDMI connection and TV left to output signal using RCA connection see fig 1 2 5 Switch AVerVision Port Display Device Port Connect to a Monitor or LCDIDLP Projector Locate the RGB input port of the graphics display device and connect it to RGB OUTPUT port of AVerVision PL50 Make sure the TV RGB switch is set to RGB LCD DLP projector LCD monitor ENGLISH Connect to a Monitor or LCDIDLP Projector with HDMI interface Locate the HDMI input port of the display device and connect it to HDMI OUTPUT port of AVerVision PL50 Make sure the TV RGB switch is set to RGB VIDEO OUT 7 woes gre 85232 oeo m sa HOMI 9 EAE HDMI cable HDMI monitor Connect to a TV Locate the VIDEO SCART RGB if applicable input port of the TV or Video equipment i e VCR to record your presentation and connect it to VIDEO OUT port 3 RCA cable Television P Gg 205 Connecting the Power Connect the power adapter to a standard 100V 240V AC power outlet The un
23. ide Show icons Annotation can only be supported in the following resolution setting ind 1024 768 E 1280 x 720 e 1280x 1024 CAS CAS OCASO a z Connecting a USB mouse or AP20T 1 Set the USB switch on the rear panel to 2 2 Connect the USB mouse cable or AP20T dongle to the USB slot of AVerVision PL50 a4 ov in Bo Qe e 0 USB Dongle Using the Annotation Control Panel appear on the screen Move the cursor on the Annotation control panel selections and left click to select the features you want to use Color Palette Select the line color Select to draw freeform line Capture the image with the annotation and save it as a new Capture file Select to erase any part of the annotation that it comes in Eraser contact with or delete all annotation Hide Show Shrink or expand the annotation menu Using the AP20T Slide Switch and F button The slide switch and F button of AP2OT allow you to use it to freeze the screen when you are in camera mode and zoom in and out the image when you are in playback and camera mode With the Point Focus feature you can adjust the focus anywhere on the screen by simply pressing the pen tip on a flat surface EET NN NN 1 Slide Up Increase the magnification 3 Freeze screen in camera mode and turn on Annot
24. ight box surface or use marker that could stain the light box surface DO NOT use any sharp object such as cutter knife on top of the light box surface Handling the AVerVision 50 The AVerVision PL50 must be folded in storage position and use two hands to carry it from the base N DO NOT carry the unit from the side lights or camera head arm This may not be able support the weight and it will damage the mechanical joint ENGLISH Anti glare Sheet The anti glare sheet is a special coated film that helps eliminate any glare that maybe encountered while displaying very shiny objects or glossy surfaces such as magazines and pictures To use simply place the anti glare sheet on top of the shiny document to reduce reflected light External Memory Storage AVerVision PL50 supports both SD memory card and USB flash drive for more image capture and audio amp video recordings AVerVision PL50 can detect when there is an external storage media and automatically switch to the last detected storage If no external storage is connected all captured still images will be saved in the built in memory Insert an SD Card Insert the card with the contact facing down until it reaches the end To remove the card push to eject and pull the card out The supported SD card capacity is from 1GB to 32GB FAT 2 Lad e
25. it automatically in standby mode once the power is connected Press to turn on Power adapter Wall outlet V Connect to a Computer Locate the RGB VGA output port of the computer or laptop and connect it to RGB INPUT port of AVerVision PL50 The video signal from the RGB INPUT port is streamed to RGB OUTPUT port To display computer image press PC1 PC2 button on the control panel or remote control to switch AVerVision PL50 to computer mode For laptop to output display image use the keyboard command FN F5 F8 to switch between the display modes For different command please refer to your laptop manual ENGLISH Connect to a Computer via USB Locate the USB port of the computer or laptop and connect it to USB port of AVerVision PL50 This enables you to use AVerVision PL50 as a USB Camera or to transfer the captured pictures videos from the memory and to computer Also see Transfer File from AVerVision PL50 to PC Make sure the USB Flash Drive switch see fig 1 2 6 is set to the right ETE RE OU AL n 18 e 95 6 6 m H CC we ees LI ca Connect an External Microphone S Plug a 3 5mm mono microphone to P port The built in microphone on the control panel will be disabled when an external microphone is connected The recorded audio will be in monophonic sound
26. it is set to level 100 Press to move to the next selection OK press for the setting to take effect If you select ON upper part of the presentation screen is slightly exposed Use the A V 4 amp gt buttons to reveal more of the covered area and OFF will close the submenu PIP Select the thumbnail playback screen location and show the thumbnail playback screen at the corner of the screen to recall the captured image from the memory in Camera mode Select OFF to cancel PIP Lower Left Upper Left 9 Upper Right Lower Right Split Screen Divide the screen into two parts Half of the screen displays the 8 thumbnail images and the other half display the image from the AVerVision PL50 camera Select the display location of the 8 thumbnail playback images Select OFF to cancel Split Screen Rl E Right Top Below 23 Timer Start Pause Stop the timer and set the timer duration The timer automatically counts up after the count down reaches zero to show the elapsed time Even when you switch between Playback PC or Camera modes the timer will continue Capture Select to set the capture resolution quality type and interval settings Resolution Select the capture size In 5M setting the capture resolution size is 2560 X 1920 If the output display setting is in 1280 x 720 or 1920 x1080 the capture resolution size will be 2560 x 1440 and as for 1280 x 800 output di
27. ncrease and decrease the video playback volume Use 48 to play the video backward and forward Move the Spotlight frame and Visor screen cover Make a selection in Playback mode and OSD menu Start Pause video playback Reset zoom level to 100 Adjust the focus automatically Rotate the image by 90 in Camera mode and Playback mode Pause or resume image display in Camera mode Stop audio amp video playback in Playback mode View amp playback captured still images and audio video files PC mode displays the video signal from the RGB 1 2 port of AVerVision PL50 Remote Control ENGLISH The remote control requires two 2 AAA size batteries supplied make sure batteries are installed properly before use You can access all the features of AVerVision PL50 with the remote AON er P une atten amis urn S amne T unge OO i t Ge a 1 l ooN 5 5 1 2 POWER Turn the unit on standby CAMERA Camera mode displays the video signal from the built in camera RECORD Start Stop audio amp video recording Video 6 7 recording can only be saved either in a SD memory card or a USB flash drive Capture still image in Camera mode In continuous capture
28. nning on the date of purchase of the applicable product and extending as set forth in the Warranty Period of AVer Product Purchased section of the warranty card AVer Information Inc AVer warrants that the applicable product Product substantially conforms to AVer s documentation for the product and that its manufacture and components are free of defects in material and workmanship under normal use You as used in this agreement means you individually or the business entity on whose behalf you use or install the product as applicable This limited warranty extends only to You as the original purchaser Except for the foregoing the Product is provided AS IS In no event does AVer warrant that You will be able to operate the Product without problems or interruptions or that the Product is suitable for your purposes Your exclusive remedy and the entire liability of AVer under this paragraph shall be at AVer s option the repair or replacement of the Product with the same or a comparable product This warranty does not apply to a any Product on which the serial number has been defaced modified or removed or b cartons cases batteries cabinets tapes or accessories used with this product This warranty does not apply to any Product that has suffered damage deterioration or malfunction due to a accident abuse misuse neglect fire water lightning or other acts of nature commercial or industrial use unauthorized product mo
29. or level can be adjusted up to 255 Focus Manually adjust the focus 21 Presentation Spotlight Spotlight overlays a frame on the presentation screen You can move the Spotlight around the presentation screen using the A V 4 amp buttons Select Execute to call the Spotlight submenu In the Spotlight submenu the following options are available ON OFF select to run cancel the Spotlight Press to move to the next selection Shade set the opacity level of the area outside the box The shaded area will completely turns black when it is set to level 100 Press to move to the next selection Color select the Spotlight frame color Press to move to the next selection OK press for the setting to take effect If you select ON the frame will appear and blink use the A V lt amp gt buttons to adjust the frame size and press to set the desired size and OFF will close the submenu Visor Visor covers the presentation screen The upper part of the presentation screen is slightly exposed A V 4 8 buttons to reveal more of the covered area Select Execute to call the Visor submenu 22 In the Visor submenu the following options are available ON OFF select to run cancel the Visor Press 10 move to the next selection Shade set the opacity level of the covered area The shaded area will completely turns black when
30. re visible Viewing the subject from 32 36 i eer cm 16X zoom away from the camera Mirror E Graphics adjust the gradient of image Viewing the subject from 32 36 cm 16X zoom away from the camera Motion increase frame rate Sufficient lighting is required when using this mode Viewing the subject from 32 36 cm 16X zoom away from the camera 4 Microscope automatically adjust optical zoom for microscopic viewing Macro set to view when object is only 10 32cm 5X zoom away from the camera Infinite set to view when subject is from 36 cm to infinity Max 16X and further away from the camera Effect Convert the image into positive true color monochrome black and white or negative Mirror Select to flip the image in Camera mode Advanced Select to set the Auto Image Exposure and White Balance settings Auto Image Select ON or OFF to automatically adjust the white balance and exposure setting and correct the color and exposure compensation Exposure Select the exposure setting AUTO automatically adjust the camera exposure and the amount of light required MANUAL manually adjust the exposure level The exposure can be adjusted up to 99 White Balance Select the White Balance setting for various light conditions or color temperature AUTO automatically adjust the white balance MANUAL manually adjust the red and blue color level The col
31. s included RGB Cable AVerVision PL50 Power Adapter 12V 2A The power adapter will vary depending on the standard power outlet of the country Software amp Manual CD Some country the Software where it is sold and Manual CD may not be included in the package but Dust Cover the files can be downloaded in our website Optional Accessories AP20T Interactive Wireless Pen 34mm Rubber Coupler 28mm Rubber Coupler Get Familiar with the AVerVision PL50 fig 1 1 Function 1 Camera head Contain the camera sensor 2 Camera lens Focus the image in the camera 3 Rear panel Connections and switches for the following Power Computer for RGB input display Display device for RGB HDMI or RCA video output Microphone Speaker SD card for picture and video recording storage RS 232 for serial communication between computer and AVerVision PL50 USB standard for USB flash drive and AP20T mouse connection Mini USB for computer data transfer or USB camera connection TV RGB display output switch USB Flash Drive PC switch 4 Side Lights Provide light when presenting in dimmed lighting condition b Light box Provide light for viewing x ray film or transparency 6 Arm latch Extend and retract the arm 7 Base latch Fold and unfold the arm 8 Built in MIC Record audio when recording video clip The recorded sound will
32. splay the capture size will be 2560 x 1600 Quality Select the capture compression setting 24 Type Select the capture type Single capture one picture only Continuous capture successive pictures Interval Set the time interval for continuous capture The length can be set up to 600 sec 10 min Recording Select the video recording compression setting Storage Change the storage location Audio amp video recording can only be saved in SD memory card or USB flash drive Format Format to delete all the data in the selected memory 25 USB to PC Select the status of the AVerVision PL50 when it is connected to the computer via USB Make sure the USB switch on the rear panel is set to Hel Camera can be used as a computer webcam or with our bundled software to record video and capture still image Storage transfer the captured pictures videos from the memory to computer hard disk Flicker Select between 50Hz or 60Hz Some display devices cannot handle high refresh rates The image will flicker a couple of times as the output is switched to another refresh rate Language Change and select different language Output Display Set the resolution to display the image on screen This selection will be disabled in TV output mode Backup Copy the image from the built in memory to SD card or USB flash drive 26 ENGLISH Menu Screen Function Sa
33. t Insert the SD card with the label facing up 12 USB Thumb Drive port Insert a USB flash drive for audio video recording storage or connect a AP20T mouse for the Annotation feature 13 Mini USB port Connect to a USB port of a computer using a USB cable and use the AVerVision PL50 as a USB Camera or transfer the captured images videos either from the memory source to computer Control Panel 1 2 Aver AVerVision PL50 15 14 13 12 11 10 fig 1 3 1 2 3 10 11 POWER CAMERA CAP DEL RECORDING LAMP MIC ZOOM MENU 4 amp gt ENTER ZOOM 1X AUTO FOCUS 2 ROTATE FREEZE STOP PLAYBACK 5 PC 1 PC2 Turn the unit on standby Camera mode displays the video signal from the built in camera Capture picture in Camera mode In continuous capture mode press this button again to stop Delete the selected picture video in Playback mode Start Stop audio amp video recording Audio and video recording can be saved on an SD card or a USB Flash drive only See External Memory Storage Turns on the side lights light box or off Record audio automatically when recording video clip Increase decrease the image magnification in camera and picture playback mode Open and exit the OSD menu Pan and zoom in image above digital zoom level in both live and playback mode Select options in OSD menu Use A amp V to i
34. t this product may cause radio interference in which case the user may be required to take adequate measures COPYRIGHT 2012 AVer Information Inc All rights reserved All rights of this object belong to AVer Information Inc Reproduced or transmitted in any form or by any means without the prior written permission of AVer Information Inc is prohibited AVer Information Inc reserves the rights to modify its products including their specifications and any other information stated herein without notice The official printout of any information shall prevail should there be any discrepancy between the information contained herein and the information contained in that printout AVer is a trademark owned by AVer Information Inc Other trademarks used herein for description purpose only belong to each of their companies NOTICE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION THE MARK OF CROSSED OUT WHEELED BIN INDICATES THAT THIS PRODUCT MUST NOT BE DISPOSED OF WITH YOUR OTHER HOUSEHOLD WASTE INSTEAD YOU NEED TO DISPOSE OF THE WASTE EQUIPMENT BY HANDING IT OVER TO A DESIGNATED COLLECTION POINT FOR THE RECYCLING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT FOR MORE INFORMATION ABOUT WHERE TO DROP
35. ve Setting Save the current setting in the selected profile number Only brightness contrast image mode effect auto image setting flicker recording quality capture resolution and capture quality can be saved Recall Setting Restore the setting back to the selected profile number Information Display the product information Default Restore all the settings into original factory default setting Playback Slide Show Display all captured still pictures in an automated slide show The video file will be skipped Interval Set the interval before displaying the next picture The length can be set up to 100 sec Slide Show Effect Select the slide show transition effect E Slide image Wipe right E Checker down Split Vertical Out Wipe down Split Horizontal Out Current Storage Select the source of the images Delete Permanently delete all the data in selected memory source A Warning Message will appear Select YES to continue and NO to stop formatting the storage 28 ENGLISH Annotation In single image playback mode or when the screen is frozen in camera mode you can use the annotation feature to overlay straight line or freeform line on the captured image or still camera screen with the USB mouse or AP20T connected to the USB port of AVerVision PL50 It comes with the following selections Color Palette Line Thickness Line Freehand Capture Eraser and H
Download Pdf Manuals
Related Search