Motorola MBP28
Contents
1. 4 5 Alert tones 4 6 Select camera One 4 7 Register a camera 17 4 8 RESET 17 DISPOSAL OF THE DEVICE CLEANING TROUBLESHOOTING GENERAL 20 TECHNICAL 8 1 1 1 25 1 SAFETY INSTRUCTIONS A WARNING STRANGULATION HAZARD Keep the adapter cord out of the baby s reach NEVER place the camera unit or its cord within the crib Secure the cord well away from the baby s reach Never use extension cords with AC Adapters Only use the AC Adapters provided This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is when handled as described in the User s Guide safe to use Therefore always read the instructions in this User s Guide carefully before using the device Determine a location for the baby monitor that will provide the best view of your baby in the crib Place the baby monitor a flat surface such as dresser bureau or shelf or wall mount it securely using the keyhole slots in the base NEVER place the baby monitor or its cord inside the crib or playpen Never immerse any part of the baby monitor in water or any other liquid Make sure the camera unit2. MOTOROLA User s Guide MBP28 MBP28 2 MBP28 3 MBP28 4 MBP28 Twin MBP 28 Triple MBP28 Quad Baby Monitor The features described in this user s guide are subject to modifications without prior notice Welcome to your new Motorola Baby Monitor Thank you for purchasing the MBP28 Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room Please retain your original dated sales receipt for your records For warranty service of your Motorola product you will need to provide a copy of your dated sales receipt to confirm warranty status Registration is not required for warranty coverage For product related questions please call US and Canada 1 888 331 3383 On the Web www motorola com ENGLISH This User s Guide provides you with all the information you need to get the most from your product Before you use the baby monitor we recommend you insert and fully charge the battery in the parent unit so that it continues to work if you disconnect it from the mains power to carry it to another location Please read the Safety Instructions on page 9 before you install the units Got everything Parent unit MBP28PU e Camera unit s MBP28BU e Rechargeable Ni MH battery pack for the Parent unit e Battery door for Parent unit e Belt clip for Parent unit e Power adapter for the Parent unit e Power adapter s for the Camera unit s In multi
3. 1 Read this User s Guide 2 Visit our website www motorola com 3 Contact Customer Service at US and Canada 1 888 331 3383 To order a replacement battery pack for parent unit contact customer service Consumer Products and Accessories Limited Warranty Warranty Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD BINATONE What Does this Warranty Cover Subject to the exclusions contained below BINATONE warrants that this Motorola branded product Product or certified accessory Accessory sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below This Warranty is your exclusive warranty and is not transferable Who is covered This Warranty extends only to the first consumer purchaser and is not transferable GENERAL INFORMATION What will BINATONE do FINANCIAL LOSS ARISING OUT OF OR IN BINATONE or its authorized distributor at its option and CONNECTION WITH THE ABILITY OR INABILITY TO within a commercially reasonable time will at no charge USE THE PRODUCTS OR ACCESSORIES TO THE repair or replace any Products or Accessories that do not FULL EXTENT THESE DAMAGES MAY BE conform to this Warranty We may use functionally DISCLAIMED BY LAW equivalent reconditioned refurbished pre owned or new Some jurisdictions do not allow
4. BUSINESS LOSS OF INFORMATION OR OTHER Replaced GENERAL INFORMATION 21 Exclusions Normal Wear and Tear Periodic maintenance repair and replacement of parts due to normal wear and tear are excluded from coverage Batteries Only batteries whose fully charged capacity falls below 80 of their rated capacity and batteries that leak are covered by this Warranty Abuse amp Misuse Defects or damage that result from a improper operation storage misuse or abuse accident or neglect such as physical damage cracks scratches etc to the surface of the product resulting from misuse b contact with liquid water rain extreme humidity or heavy perspiration sand dirt or the like extreme heat or food c use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions or d other acts which are not the fault of MOTOROLA or are excluded from coverage Use of Non Motorola branded Products and Accessories Defects or damage that result from the use of Non Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage Unauthorized Service or Modification Defects or damages resulting from service testing adjustment installation maintenance alteration or modification in any way by someone other than MOTOROLA BINATONE or its authorized service centers are excluded from co
5. 12 USING YOUR BABY MONITOR NOTE 3 4 Talk Back If you place the parent and camera units too close You can use the Talk Back feature to comfort and together you may hear a high pitched noise This is nota reassure your baby fault The units are designed to be operated at some During Talk Back you will not be able to hear your baby distance apart e g in separate rooms so move the units until you release further apart 1 Press and hold on the parent unit to speak to your 3 3 Adjust speaker volume of parent unit baby Talk will be displayed on the parent unit and camera unit 2 Release the button to hear your baby again There are 5 volume levels on the camera unit and 6 3 4 1 Adjust talk back volume levels on the parent unit including VOLUME OFF The volume The camera unit has 5 volume levels from Level 1 to Level 5 level of parent unit will be shown on the status bar when Press or on the camera unit to increase or you adjust the voume decrease the volume respectively 1 Press q y onthe parent unit or M or on NOTE the camera unit to adjust the respective volume level lullaby is playing it will stop during Talk Back but will 2 The 4 will be displayed if the volume is turned offon restart from the beginning when the Talk Back ends the parent unit 3 5 Temperature An audible alert will emit when you reach the highest The camera unit constantly monitors the temperature in your or lowest volume l
6. battery pack installed 23 Belt clip stand on parent unit 3 USING YOUR BABY MONITOR Please read these instructions carefully and be aware that this baby monitor is only intended as an aid It is not a substitute for responsible correct parental supervision 3 1 Power on off the parent unit 1 When the parent unit is off press until you hear beep and the Power Indicator starts to flash The parent unit will search for and link itself to the registered camera units Belt clip Desk position position 2 When the parent unit is on press and hold amp until the 1 The belt clip stand attaches to the back of the parent Power Indicator turns off The parent unit is now unit and clips into the locking slots on each side powered off although the display may take a few NOTE seconds to go off fully It will only fit one way as indicated by UP and the arrows 3 2 Power on off the camera unit on the inside of the clip 1 When the camera unit is off press to power it on 2 The unit comes with the accessory fitted in the belt The Powerl Link Indicator will flash for a few clip mode seconds until it links with the parent unit and stays 3 You can convert it into the stand mode by simply steadily on pulling the back part of the clip out slightly and then 2 When the camera unit is on press and hold until rotating it by half a turn as shown above the Power Link Indicator turns off The camera unit is now powered off
7. camera packs you will find one or more additional camera units with power adapters Overview of your Parent unit 1 G a e a SST Q Power Indicator OY On when the parent unit is powered on Flashes when the parent unit is searching for a camera unit Off when the parent unit is powered off UP Volume 4 In idle mode Press to increase the speaker volume In menu mode Press to move up the menu list Menu OK ox In idle mode Press to access the main menu In menu mode Press to access a sub menu or confirm the settings DOWN Volume 47 In idle mode Press to decrease the speaker volume In menu mode Press to move down the menu list Talko In idle or menu mode Press and hold to talk back through the camera unit Release to quit the talk mode When LCD is off Press to turn on the LCD LCD Off Q In monitoring mode Press to turn on off the LCD In menu mode Press to go back to idle mode Power Back In power off mode Press to power the parent unit In monitoring mode Press to switch to the next camera unit In idle or menu mode Press and hold to power off the parent unit In menu mode Press to cancel settings and go back to the previous level Battery Charging Indicator 10 On steadily whenjin charging mode Flashes when low battery is detected NOTE On when connected with power adapter even if w
8. the limitation or exclusion Products Accessories or parts of incidental or consequential damages or limitation on What Other Limitations Are There the length of an implied warranty so the above limitations ANY IMPLIED WARRANTIES INCLUDING WITHOUT or exclusions may not apply to you This Warranty gives LIMITATION THE IMPLIED WARRANTIES OF you specific legal rights and you may also have other MERCHANTABILITY AND FITNESS FORA rights that vary from one jurisdiction to another PARTICULAR PURPOSE SHALL BE LIMITED TO THE BOON OF THIS LIMITED WARRANTY Consumer One 1 year from the date of the OTHERWISE THE REPAIR OR REFLACEMENT Products inal purchase by the PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE ae at al CONSUMER AND IS PROVIDED IN LIEU OF ALL product OTHER WARRANTIES EXPRESS OR IMPLIED INNO Consumer Ninety 90 days from the date of EVENT SHALL MOTOROLA OR BINATONE BE LIABLE Accessories the accessories original purchase WHETHER IN CONTRACT OR TORT INCLUDING by the first consumer purchaser of NEGLIGENCE FOR DAMAGES IN EXCESS OF THE the product PURCHASE PRICE OF THE PRODUCT OR Consumer The balance of the original ACCESSORY OR FOR ANY INDIRECT INCIDENTAL Products and warranty or for ninety 90 days SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY Accessories that from the date returned to the KIND OR LOSS OF REVENUE OR PROFITS LOSS OF are Repaired or consumer whichever is longer
9. the supplied power Power Indicator on the parent unit does not come on adaptor for recharging parent unitis powered oe Check whether there is any event triggered e g low Check whether the supplied battery pack is correctly battery sound alert or timer installed and that they are not drained Recharge the parent unit by connecting it to the power Cannot view the video image of baby from the parent unit LCD may be turned off Activate the video feed by Power Link Indicator on the camera unit flashes pressing The camera unit may be not registered to the parent The parent unit and the monitoring camera unit may be unit Refer to section 4 7 to register the camera unit out of range with each other Reduce the distance The parent unit and monitoring camera unit may be out between the units but not closer than 5 feet of range with each other Reduce the distance Battery pack in parent unit may be drained Connect between the units but not closer than 5 feet the parent unit to the mains power with the supplied Battery Charging Indicator or on the parent power adaptor for recharging unit screen flashes Battery pack in the parent unit is running low Connect the parent unit to the mains power with the supplied power adaptor for recharging Cannot hear sound or baby cry from the parent unit The volume level the parent unit may be set too low increase the volume level of t
10. P28 with a slightly damp cloth or with an At the end of the product lifecycle you anti static cloth Never use cleaning agents or abrasive should not dispose of this product with solvents normal household waste Take this product to a collection point for the recycling of electrical and electronic equipment The Cleaning and care Do not clean any part of the product with thinners or A 2 other solvents and chemicals this may cause symbol on the product user s guide and or box indicates permanent damage to the product which is not this covered by the warranty Some of the product materials can be re used if you take Keep your MBP28 away from hot humid areas or them to a recycling point By reusing some parts or raw strong sunlight and do not let it get wet materials from used products you make an important Every effort has been made to ensure high standards contribution to the protection of the environment of reliability for your MBP28 However if something Please contact your local authorities in case you need does go wrong do not try to repair it yourself contact more information on the collection points in your area Customer Service for assistance Dispose of the battery pack in an environmentally friendly manner according to your local regulations 18 DISPOSAL OF THE DEVICE ENVIRONMENT 7 TROUBLESHOOTING e Battery pack in parent unit is running low Connect the parent unit to the mains power with
11. TIONS Parent Unit Frequency 1921 536 1928 448 MHz Channels 5 Operating temperature 5 C 45 C Display 1 8 diagonal TFT LCD Display color 65K color LCD Brightness control 5 steps Battery rating 2 4V 750mAh Ni MH battery pack lt BYD H AAA750BX2 L130 GPI VTRHCH73N000 SHIDA TFL2X44AAA750US CD58 01A gt Power supply adapter rating Input 100 240VAC 50 60Hz 150mA Output 6VDC 600mA 25 MOTOROLA Manufactured distributed or sold by Binatone Electronics International LTD official licensee for this product MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings LLC and are used under license All other trademarks are the property of their respective owners 2012 Motorola Mobility Inc All rights reserved OY Version 2 0 Printed in China
12. als NOTE Only registered camera unit s will be shown in the selection list PARENT UNIT SETTINGS Register a camera unit IMPORTANT When you purchase your baby monitor system all cameras are already registered to the parent unit so you do not need to register them Camera registration is only necessary if one has become faulty or if you buy a new one You can register up to 4 cameras to the parent unit To register a camera unit 1 2 3 Press OK to access the main menu Press 4 to select REGISTER Press ox to confirm The parent unit will display Registration mode and then display Registering which indicates it has entered the registration mode Press and hold m on the camera unit until it emits a beep tone There will be a beep and the display will show Registered when the registration is successfully completed and the camera will be assigned a baby unit number which can be checked from the parent unit PARENT UNIT SETTINGS 4 8 Reset You can restore all the adjustable settings of the registered camera units and parent unit to the original factory settings 1 Press to access the main menu Press dt or lt to select RESET 2 3 Press to confirm The display will show CONFIRM 4 Press x to confirm again The parent unit and the registered camera units will be reset 5 DISPOSAL OF THE DEVICE 6 CLEANING ENVIRONMENT Clean your MB
13. and the cord are always out of reach of the baby Adult assembly is required Keep small parts away from children when assembling This product is not a toy Children should be supervised to ensure that they do not play with the baby monitor This baby monitor is not a substitute for responsible adult supervision Keep this User s Guide for future reference Never cover the baby monitor with a towel or blanket Never use extension cords with power adapters Only use the power adapters provided Test this monitor and all its functions so that you are familiar with it prior to actual use Never use the baby monitor in moist places or close to water Do not expose the baby monitor to extreme cold or heat or to direct sunlight Do not put the baby monitor close to a heat source Only use the chargers and power adapters provided Do not use other chargers or power adapters as this may damage the device and battery pack Only insert a battery pack of the same type Do not touch the plug contacts with sharp or metal objects SAFETY INSTRUCTIONS 9 To avoid the risk of electric shock do not open the housing of the camera or parent units other than the battery compartment This baby monitor is intended as an aid It is not a substitute for responsible and proper adult supervision and should not be used as such CAUTION Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according
14. de in any literature publications or promotional materials issued by BINATONE or representations made by any agent employee or staff of BINATONE that may have been made in connection with the said purchase GENERAL INFORMATION FCC ACTA and Industry Canada IC Regulations Warning Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver 23 Connect the equipment into an outlet on a circuit Caution To maintain the compliance wi
15. evel F sos a baby s room and alerts you if it gets lower than 14 C or Changing the volume setting on the camera unit affects 57 F by emitting a warning beep and showing the alert the volume when you use the Talk Back feature and when message Too cold from Baby Unit x on the parent unit playing a lullaby screen or if it gets higher than 39 C or 102 F it will show hot from Baby Unit x Although this is for reference only and there may be a small difference between the baby monitor reading and the actual temperature please check your baby immediately if such an alert message is triggered USING YOUR BABY MONITOR 13 Note The current temperature at the camera unit is shown on the parent unit status bar whenever it is displayed 3 6 Lullaby There are 3 lullabies available to play for your baby either repeating one lullaby or repeating through all three lullabies 1 Press on the camera unit to select the lullaby and start playing when the camera is linked with the parent unit 2 During playback press JJ to step through the different lullabies OR Press on the camera unit to start playing the selected lullaby 3 During playback press B to stop playing NOTE Once the camera unit loses the link with the parent unit the lullaby playing will be stopped and will not be resumed automatically even if the link is set up again 3 7 Switch monitoring camera unit The system allows registerin
16. g up to four camera units You can switch the monitoring camera unit by one touch key or by menu settings By one touch key U Press L on the parent unit when it is in video monitoring mode The parent unit will switch to the next registered camera unit to monitor your baby You can switch to other registered camera units by further pressing 2 if necessary with each registered camera unit being selected in turn By menu settings The system also allows the parent unit to be set to automatically switch among all the camera units with each registered camera unit being selected in turn at about 30 second intervals Refer to section 4 6 for the instructions of how to set the parent unit to scan through all camera units automatically USING YOUR BABY MONITOR 4 PARENT UNIT SETTINGS 4 1 Set the language 1 Press to access the main menu 2 Press d or A select LANGUAGE 4 3 Press ox and or to select the desired language 4 Press ox to confirm 4 2 Timer The timer function serves as an alarm to remind you of things to do for the baby such as feeding or medication and it can be set as a one off or a repeated time period 4 2 1 Turn on the timer 1 Press OK to access the main menu 2 Press lt 10 select TIMER Press OK and lt lt to select ACTIVATION 4 PY to select ON or OFF If you select ON press lt pia to select the timer mode from ONCE or REPEATED 6 Pres
17. he parent unit Refer to _ section 3 3 for volume level settings The parent unit beeps The parent unit and the monitoring camera unit may be ane parent unit may bes out of range with each other Reduce the distance monitoring camera unit Reduce the distance between between the units but not closer than 5 feet the parent unit and the camera unit but not closer than 5 feet The camera unit may be switched off Press key to switch on the camera unit TROUBLESHOOTING 19 The baby monitor system produces a high pitched noise The parent unit and the camera unit may be too close to each other Make sure the parent unit and camera unit is at least 5 feet away from each other The speaker volume of the parent unit maybe set too high Decrease the volume of the parent unit Battery pack in the parent unit is running low quickly The LCD brightness may be set too high Try to decrease the brightness level Refer to section 4 3 for details The volume level of the parent unit may be set too high which consumes power Decrease the volume level of the parent unit Refer to section 3 3 for volume level settings Talk back feature does not work Make sure the camera unit is powered and link between parent unit and camera unit is normal Check that the volume is loud enough at the camera unit refer to section 3 4 8 GENERAL INFORMATION If your product is not working properly
18. ithout battery pack installed Color Display Screen LCD Parent Unit Display Indicates the timer alarm is activated Icons Function lt Indicates the sound alert is set to ii P 7 Indicates the signal strength between the camera unit and parent unit The more blocks the Indicates when the parent unit is connected with the stronger the connection signal power adapter but no battery pack installed Disappears when no connection between the camera unit and parent unit Low battery needs charging 4 Indicates when the speaker of the parent unit is muted E 1 2 battery level More bars inside mean higher battery charge Indicates the speaker volume level of the parent unit from 1 quiet to 5 loud Full battery level 11 Indicates when the camera unit is playing a lullaby Internal bars cycling indicates the battery is charging Indicates the current camera unit that is being previewed on the screen 24 C Indicates the temperature detected at the current camera unit between 14 C 57 F and 39 C 102 F Menu Structure of the Parent Unit MAIN MENU BU SELECTION LANGUAGE TIMER BRIGHTNESS SOUND ALERT REGISTER RESET ALERT TONES SUB MENU Baby Unit 1 Activation Level 1 5 On Low Battery Baby Unit 2 Set Timer Off No Li Baby Unit 3 Baby Unit 4 All Baby Units Note Onl
19. s to confirm Press lt PARENT UNIT SETTINGS 4 2 2 Set the timer 1 Repeat steps 1 to 2 in section 4 2 1 2 Press 4 to select SET TIMER 3 Press and then set the number of hours 00 to 12 using the or y keys 4 Press OK and then se the number of minutes 00 to 59 using the or y keys 5 Press to confirm the timer interval set NOTE When the timer period is reached the unit will emit an alert beep for 30 seconds and show 00 00 on the screen You can press any button to stop the beeps If the timer mode was set to ONCE the timer will be cancelled but if set to REPEATED it will reset and start another timer period 43 Set the brightness 1 Press x to access the main menu Press 4 or 47 to select BRIGHTNESS Press OK to enter to show the list of levels Press amp to select from LEVEL 1 LEVEL 5 The screen brightness changes as the options are selected 5 Press ox to confirm NOTE A lower brightness level will reduce the power consumption POON 15 4 4 Sound alert When the sound alert is set ON and the parent unit speaker volume is off it will cause the parent unit to beep and flash Sound alert from Baby Unit x on the display whenever the sound at the baby unit goes above a preset threshold 1 Press to access the main menu 2 Press 4 or 47 to select SOUND ALERT 3 Press and a or to turn on or off the sound alert 4 Pre
20. ss ox to confirm The parent unit beeps only if the sound level at the camera reaches a preset sensitivity level 4 5 Alert tones You can set the parent unit to give a warning when the battery is low and or if the radio link to the camera unit is lost When activated an alert screen will be displayed on the parent unit with an alert tone emitted simultaneously 1 Press OK to access the main menu Press lt or a to select ALERT TONES q ao Pen Press to confirm Press and q or 47 to select LOW BATTERY or NO LINK Press and 4 y to turn on or off the alert tone NOTE When LCD is off any alert message will turn on the LCD 4 6 Select camera unit The system supports up to four camera units You can select any registered camera unit and view the picture from that camera 1 Press to access the main menu 2 Press or to select BU SELECTION 3 Press and 4 or to select the desired baby unit or ALL BABY UNITS 4 Press on to confirm The parent unit will start to connect with the selected camera unit while the other unit s will be in shutdown mode The CAM x icon e g H will be shown on the status bar when displayed where x is the baby unit number of the selected camera unit When ALL BABY UNITS is selected the screen of the parent unit will automatically switch between all the registered camera units with each camera unit being selected in turn at about 30 second interv
21. th the FCC s RF different from that to which the receiver is connected exposure guideline place the baby unit at least 20 cm Consult the dealer or an experienced radio TV from nearby persons technician for help For body worn operation the parent unit has been tested This device complies with part 15 of the FCC Rules and meets the FCC RF exposure guidelines when used Operation is subject to the following two conditions 1 with the belt clip supplied or designated for this product This device may not cause harmful interference and 2 Use of other accessories may not ensure compliance with this device must accept any interference received FCC RF exposure guidelines including interference that may cause undesired operation This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device This Class B digital apparatus complies with Canadian ICES 003 24 GENERAL INFORMATION 9 TECHNICAL SPECIFICATIONS Camera Unit Frequency 1921 536 1928 448 MHz Channels 5 Operating temperature 5 C 45 C Image sensor Color CMOS 0 3M Pixels Lens f 3 6mm F 2 4 IR LED 4 pcs Power supply adapter Input 100 240VAC 50 60Hz rating 150mA Output 6VDC 600mA TECHNICAL SPECIFICA
22. to the instructions Use only battery pack with rating 2 4V 750mAh 2 GETTING STARTED 2 1 Camera unit power supply DC JACK DC PLUG 1 Insert the DC plug of the power adapter with the smaller DC plug into the DC jack in the side of the camera unit 2 Connect the other end of the power adapter to a suitable power outlet NOTE Only use the provided power adapter GETTING STARTED 22 Parent unit battery installation A rechargeable battery pack is supplied and should be fitted so that the parent unit can be moved without losing the link and picture from the camera unit s Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low Battery JACK Battery PLUG GETTING STARTED 7 Take off the belt clip stand Slide off the battery compartment cover Insert the plug of the battery pack into the jack inside the battery compartment and fit the battery pack into the compartment Replace the battery compartment cover and reinstall the belt clip stand refer to section 2 3 Insert the DC plug of the power adapter with the bigger DC plug into the DC jack in the side of the parent unit Connect the other end of the power adapter to a suitable power outlet The Charging Indicator comes on NOTE Only use the provided power adapter and battery pack The parent unit can work with the power adapter connected but without a
23. unit may block the radio signal The signal strength may also be reduced by other solid structures like walls as TVs computers cordless or mobile phones fluorescent lights or dim If the signal is poor try moving the parent and or the camera unit t SAFETY 9 GETTING 10 2 1 Camera unit power 10 2 2 Parent unit battery 11 2 3 Belt clip stand on parent 12 USING YOUR BABY 12 3 1 Power on off the parent 12 3 2 Power on off the camera 12 3 3 Adjust speaker volume of parent unit and camera 34i Talk 3 4 1 Adjust talk back volume 3 5 36 3 7 Switch monitoring camera 14 PARENT UNIT 15 4 1 Set the language 15 A2 15 4 2 1 Turn on the timer 15 4 2 2 Set the timer 4 3 Set the 4 4 Sound alert
24. verage Altered Products Products or Accessories with a serial numbers or date tags that have been removed altered or obliterated b broken seals or that show evidence of tampering c mismatched board serial numbers or d nonconforming or non Motorola branded housings or parts are excluded from coverage Communication Services Defects damages or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage GENERAL INFORMATION How to Obtain Warranty Service or Other Information To obtain service or information please call US and Canada 1 888 331 3383 You will receive instructions on how to ship the Products or Accessories at your expense and risk toa BINATONE Authorized Repair Center To obtain service you must include a the Product or Accessory b the original proof of purchase receipt which includes the date place and seller of the Product if a warranty card was included in your box a completed warranty card showing the serial number of the Product d a written description of the problem and most importantly e your address and telephone number These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you and supersede any prior agreement or representations including representations ma
25. y Baby Units registered will be shown in the list Overview of your Camera unit 10 Infrared Lights 4 x infra red LEDs for night vision illumination Camera Lens Power Link Indicator 0 On steadily when the camera unitissswitched linked to the parent unit Flashes quickly when the camera unit is in registration mode Flashes slowly when the camera unit is out of range or not registered to a parent unit Off when the camera unit is switched off Volume Press to increase the speaker volume Power 0 Press to power on the camera unit Press and hold to power off the camera unit DOWN Volume 4 Press to decrease the speaker volume Stop B Press to stop the lullaby playing Play Press to start playing the selected lullaby Lullaby JJJ Press to start playing the selected lullaby when the camera unitis linked with theparent unit During lullaby playing press to select and play the other lullabies Photo sensor Light sensor to detect when night vision is required Important guidelines for installing your Baby Monitor To use your camera unit and parent unit together you must be able to establish a radio link between them and the range will be affected by environmental conditions Any large metal object like a refrigerator a mirror a filing cabinet a metallic door or reinforced concrete between the camera and parent
Download Pdf Manuals
Related Search