Philips docking speaker with Bluetooth® DS8300
Contents
1. remote control battery To replace the remote control battery 1 Press the hole with the tip of a ball point pen or a sharp tool to open the battery compartment 2 Insert one CR2025 battery with correct polarity as indicated 3 Close the battery compartment EN 3 Note e Before pressing any function button on the remote control first select the correct source with the remote control instead of the main unit e Ifyou are not going to use the remote control for a long time remove the battery Connect power Fa Caution e Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit e Risk of electric shock When you unplug the AC adaptor always pull the plug from the socket Never pull the cord e Before connecting the AC adaptor ensure you have completed all other connections 1 Insert the plug of the AC adaptor to the DC IN socket on the back of the charge base 2 Connect one end of the AC power cord to the AC adaptor za oo 3 Connect the other end of the AC power cord to the wall outlet Turn on 1 Press on the main unit L gt When user approaches the unit light LED under volume button on the main unit turns on automatically Switch to ECO standby The unit switches to standby mode automatically when In DOCK mode the iPod iPhone iPad is disconnected from the unit e In Aud2. Move the device closer to the system or remove any obstacle between the device and the system For some devices the Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of the system EN 11 PHILIPS Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved DS8300_10_UM_V2 0
3. Always there to help you Register your product and get support at www philips com welcome ON Question Contact Philips DS8300 10 User manual PHILIPS Contents 1 Important Safety Compliance Care of the environment Notice WNNN N 2 Your Docking Entertainment System 4 Introduction 4 What s in the box 4 Overview of the main unit 4 3 Get started Prepare the remote control Connect power Turn on os 0 Un Un 4 Play Play from iPod iPhone iPad Play from Bluetooth device Play from an external device Adjust volume level Mute sound CO ON N SN NO 5 Product information Specifications 9 6 Troubleshooting 10 About Bluetooth device 10 EN 1 Important Safety e Only use attachments accessories specified by the manufacturer Use only power supplies listed in the user manual The product shall not be exposed to dripping or splashing Do not place any sources of danger on the product e g liquid filled objects lighted candles e Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type e Where the mains plug or an applicance coupler is used as the disconnect device the disconnect device shall remain readily operable Risk of swallowing batteries e The product or remote contr
4. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Philips is under license r Made for iPod HiPhone JiPad eg KC Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance iPod and iPhone are trademarks of Apple Inc registered in the US and other countries iPad is a trademark of Apple Inc EN 2 Your Docking Entertainment System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this unit you can enjoy audio from the iPod iPhone iPad and other audio devices What s in the box Check and identify the contents of your package e Main unit Remote control e 1xACadaptor e 1x AC power cord e 1x UK power cord Short User manual Safety amp Notice sheet 4 EN Overview of the main unit e Select Bluetooth mode e Pair with Bluetooth device iPo
5. aker you can also enjoy audio from an external device such as an MP3 player Note Make sure that no iPod iPhone iPad is docked in the speaker 1 Press E to select audio in mode 2 Connect the supplied audio in cable to e the AUDIO IN jack 3 5mm on the back of the unit e the headphone jack on an external device 3 Start to play the device see the device user manual Adjust volume level 1 During play press VOL to increase decrease the volume level Mute sound 1 During play press MUTE to mute unmute sound 5 Product Seren Bluetooth 2 1 EDR information Note Product information is subject to change without prior notice Specifications Amplifier Rated Output Power 2X15 W RMS Signal to Noise Ratio 65 dBA Audio in Link 0 6V RMS 10 kohm General information AC power power OH adaptor 1048A1802500U u Input 100 240V 50 60Hz 1 5A MAX Output 18V 2 5A Operation Power lt 40W Consumption ECO Standby Power lt 0 5W Consumption Dimensions Main Unit W x H Cte MIS xD 180 3mm Weight 1 92 kg Main Unit Bluetooth Frequency 2 4000 GHz 2 4835 GHz ISM band Band Range 8 meters free space EN 6 Troubleshooting Warning e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when us
6. d iPhone iPad dock e Adjust volume e Turn on the unit Power supply socket AUDIO IN e Jack for an external audio device eo 080 Overview of the remote control o O O gt Q x e Mute or restore volume 2 3 Select Bluetooth mode e Pair with Bluetooth device e Select audio in mode O Up down keys e Navigate through the iPod iPhone menu Fast forward backward keys e Fast reverse or fast forward within a track or iPhone iPod iPad Skip to the previous next track Pil e Start or pause play VOL e Adjust volume MENU e Access the iPod iPhone menu OK Confirm a selection 80000 Select iPod iPhone iPad dock mode 3 Get started Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the bottom of the apparatus Write the numbers here Model No Serial No Prepare the remote control Caution e Risk of explosion Keep batteries away from heat sunshine or fire Never discard batteries in fire For first time use 1 Remove the protective tab to activate the
7. he environment Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials and old equipment amp Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol is ttached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health R Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health Notice Y Bluetooth
8. he unit is connected to power the docked iPod iPhone iPad begins to charge Play from Bluetooth device Pair with Bluetooth deivces 1 Press 3 to select Bluetooth source gt Paring starts automatically L gt LED under 3 button on the main unit flashes rapidly 2 Turn on Bluetooth function on your device 3 Search for Bluetooth devices that can pair with your device 4 When PHILIPS DS8300 displays select it to start connection t Double beep tone confirmation is heard and the 3 LED turns on stably if connection is successful L gt If the pairing cannot be completed within 15 minute LED turns off Tip If your Bluetooth device is already paired with DS8300 before you just need to find out the PHILIPS DS8300 on your Bluetooth menu then confirm the connection e To disconnect Bluetooth EN 7 1 Turn off the connected device or move it beyond the communication range L gt 3 LED flashes e To erase Bluetooth paring information 1 Press and hold for 5 seconds L gt The unit beeps once after paring information is cleared successfully Play audio files from Bluetooth devices Note Make sure the Bluetooth connection between the unit and the device is active e To start play press P Ion the remote control e To pause resume play press Il again e To track up down press forward backward keys Play from an external device With this docking spe
9. ing this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com welcome VVhen you contact Philips ensure that the apparatus is nearby and the model number and serial number are available No power e Ensure that the AC power plug of the unit is connected properly e Ensure that there is power at the AC outlet No sound e Adjust the volume No response from the unit Disconnect and reconnect the AC power plug then turn on the unit again About Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection The device cannot be used with the system to play music The audio quality is poor after connection with a Bluetooth enabled device e The Bluetooth reception is poor Move the device closer to the system or remove any obstacle between the device and the system Cannot connect with the system e The device does not support the profiles required for the system e The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function e The system is not in the pairing mode e The system is already connected with another Bluetooth enabled device Disconnect that device or all other connected devices and then try again The paired device connects and disconnects constantly e The Bluetooth reception is poor
10. io in mode the device no longer playing music for more than 15 minutes e In Bluetooth mode the Bluetooth device no longer playing music for more than 15 minutes When the unit is in standby mode for longer than 15 minutes the unit switches to ECO power mode automatically Tip Under ECO standby mode press D or on the remote control the unit will switch on to the corresponding selected source 4 Play Play from iPod iPhone iPad You can enjoy audio from iPod iPhone iPad through this unit Compatible iPod iPhone iPad Apple iPod iPhone and iPad models with a lightning dock connector Made for e Pod nano 7th generation e Pod touch 5th generation e iPhone 5 e Pad Mini Pad4 Load the iPod iPhone iPad 1 Place the iPod iPhone iPad in the dock Remove the iPod iPhone iPad 1 Pull the iPod iPhone iPad out of the dock Listen to the iPod iPhone iPad 1 Ensure that the iPod iPhone iPad is loaded correctly 2 Press Oto select dock mode 3 Press PIL L gt The connected iPod iPhone iPad starts play e To pause resume play press Pl e To skip to a track press fast forward backward keys e To search during play press and hold fast forward backward keys then release to resume normal play e To navigate the menu press MENU then press up down keysto select and press OK to confirm for iPod and iPhone only Charge the iPod iPhone iPad When t
11. ol may contain a button cell battery which is possible to be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion e If you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention e When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery If the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer 2 EN WN Warning e Never remove the casing of this apparatus e Never lubricate any part of this apparatus e Never place this apparatus on other electrical equipment Keep this apparatus away from direct sunlight naked lames or heat e Ensure that you always have easy access to the power cord plug or adaptor to disconnect the apparatus from he power Compliance C 0890 This product complies with the requirement of the 1999 5 EC directive A copy of the EC declaration of Conformity is available in the Portable Document Format PDF version of the user manual at www philips com support Note The type plate is located on the bottom of the product Care of t
Download Pdf Manuals
Related Search