Koolance VID-NV2-L06
Contents
1. El XMIABTE VID NV1 L06 Installation Guide v1 0 E NOTE The VID NV1 L06 is designed for GeForce6 based 6800 GT and Ultra cards It will not fit regular GeForce 6800 cards The video card should be removed from the chassis in order to install this cooling device CAUTION Removal of the original heat sink my void your manufac turer s hardware warranty Please consult the manufacturer if unsure and keep all original parts in case of a return RMA A Most GeForce 6800 GT and Ultra cards are disassembled the same way although your specific model may vary The mounting screws on the bottom side should be removed first There may be 8 or more of these on your 6800 GT or Ultra card Remove all hardware nuts washers and metal posts from the Koolance black rear brace Then insert it into the back side of the video card This piece aligns with the same 4 mounting holes as the original rear heat sink brace Screws Over each washer screw tighten a metal post On front of the card place plastic insulating washers on each of the 4 brace mounting Trana After removing the top RAM heat sink and cooling fan along with unplugging the fan wires the main chipset heat sink is removed There are usually 4 paks screws on top of the card to do this gt Additional thermal paste will likely be required on the GPU chipset and RAM modules after removing the original heat sinks Apply a small amount to ea2. ch chip taking care with the GPU to coat only the raised center core The outer portion of the chipset and metal frame do not require thermal paste Spread the thermal compound evenly to cover each chip using the paste packet or a piece of thick paper Such as a business card Remove the protective film from the bottom of the chipset cooler and mount it to the video card Finally screw tighten a mounting nut firmly to each metal post NOTE Video card RAM chips are not perfectly flat with one another To make sure your VID NV1 L06 is making the best contact possible for your card remove the cooler and examine the distribution of thermal paste A missing or inadequate spot might be corrected by further tightening a top mounting nut gradually or applying more thermal paste to the chip
Download Pdf Manuals
Related Search