Elo Touch Solution 2639L
Contents
1. 0 0 0 0 00 0 0 e o n e 00000000000 m e a v son i ow oW mo wow a d EE D 8 amp oom o AM Ce Phish se Eres iobagi e ii de EEEE hts ee Se 13 Elo TouchSystems ET2639L User Guide OPERATION About Touchmonitor Adjustments Your touchmonitor will probably not require adjustment However variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display For best performance your video source should be at 1360 x 768 resolution at 60Hz vertical frame rate Operating in other resolutions will degrade video performance For input video outside the vertical frame rate and dot clock ranges the monitor will not automatically adjust but will display an Out of Range OOR message and the OSD menu will be disabled Note Do not operate the touchmonitor if you see the OOR message or LCD damage may result If you see the OOR message set the video mode to one within the allowable range Elo TouchSystems ET2639L User Guide 14 On Screen Display OSD Control Box OSD Control Buttons ALISTE ue2. 1 2 3 4 The On Screen Display OSD Control Box included with your ship ment allows you to change settings on the monitor screen It has four buttons 1 AUTO SEL select 2 DOWN 3 UP 4 MENU OSD Menu Functions Use the control buttons for the following functions Control Function MENU Displays exits the OSD Menus UP 1 Enters contrast of the OSD if no OSD is currently displayed on screen 2 Increases value of OSD adjustment choice 3 Selects OSD choice counterclockwise DOWN 1 Enters brightness adjustment if no OSD is currently displayed on screen 2 Decreases value of OSD adjustment choice AUTO SEL 1 Automatically adjusts the image on the screen this function not available for ET2639L xxEx models 2 Selects adjustment choices from the OSD menus After adjusting the values the monitor will automatically save the changes Elo TouchSystems ET2639L User Guide 15 OSD Lock Unlock You are able to lock and unlock the OSD feature When the OSD is locked no OSD can be displayed or used The monitor is shipped in the unlocked position To lock the OSD 1 Press the MENU button and UP button simultaneously for 2 seconds A window will appear displaying OSD Unlock 2 Continue to hold the buttons down for another 2 seconds and the window toggles to OSD Lock Power Lock Unlock You are able to lock unlock the Power feature When the power is locked pressing the power switch will no
3. ET2639L 26 LCD Touchmonitor User Guide Electronics Our commitment Your advantage TOUCHSYSTEMS Elo TouchSystems ET2639L 26 LCD Touchmonitor User Guide Revision E SW600286 Elo TouchSystems 1 800 ELOTOUCH www elotouch com Copyright 2008 Tyco Electronics All Rights Reserved No part of this publication may be reproduced transmitted tran scribed stored in a retrieval system or translated into any language or computer language in any form or by any means including but not limited to electronic magnetic optical chemical manual or other wise without prior written permission of Elo TouchSystems Disclaimer The information in this document is subject to change without no tice Elo TouchSystems makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose Elo TouchSystems reserves the right to revise this publication and to make changes from time to time in the content hereof without obliga tion of Elo TouchSystems to notify any person of such revisions or changes Trademark Acknowledgments IntelliTouch SC Surface Capacitive APR Acoustic Pulse Recogni tion Elo TouchSystems TE Logo and Tyco Electronics are trade marks Other product names mentioned herein may be trademarks or registered trademarks of their respective companies Elo TouchSys tems claims no interes
4. circuits v Disconnect and remove any cables that the digital device does not use Unterminated I O cables are a potential source of high RF emission levels vi Plug the digital device into only a grounded outlet receptacle Do not use AC adapter plugs Removing or cutting the line cord ground may increase RF emission levels and may also present a lethal shock hazard to the user vii If you need additional help consult your dealer manufacturer or an experienced radio or televi sion technician Elo TouchSystems ET2639L User Guide 29 Safety Label This device is not intended for use at visual display workplaces in compliance with BildscharbV The following marks have been issued for the unit and appear on the safety label as shown in the illustration below I Lampa contan mercury of propery i LJ LCOM IR B LCOM BMT B LCDS a Sie MAMA 5324 100 2401 25 5060 Hz US 1 A G Elo TouchSystems ET2639L User Guide 30 WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship With the exception of the negotiated warranty periods the warranty for the touchmonitor and components of the product is 3 years Seller makes no warranty regarding the model life of components Seller s suppliers may at any time and from time to time make chang es in
5. e 26 color active matrix thin film transistor TFT with a native resolution of 1366 X 768 e Available in Acoustic Pulse Recognition APR IntelliTouch SecureTouch and Surface Capacitive touch technologies e All monitors have VGA video data inputs and depending upon the Part Description indicating geographical area where monitors are sold some monitors have DVI D video data inputs e All touch technologies come with USB and serial inter faces except for APR which only comes with a USB interface For more detailed information please visit our website www elotouch com Elo TouchSystems ET2639L User Guide 5 INSTALLATION AND SETUP This chapter discusses how to install and set up your LCD touchmonitor and how to install Elo TouchSystems driver software Elo TouchSystems ET2639L User Guide 6 Unpacking Your Touchmonitor Check that the following items are present and in good condition Touchmonitor Power cable lt 2 USB Cable Analog Video DVI D cable not included with ET2639L xxxx x A x models OSD Control CD and Quick Install Guide not included with ET2639L Axxx models Elo TouchSystems ET2639L User Guide 7 Interface Connection Connector Panel on Rear side of Monitor Power Cable Serial Cable not Power OSD box USB cable DVI D cable Analog Video included with Button connector not included with Cable ET2639L Axxx ET2639L xxxx x models A x models To
6. the components delivered as Products or components Buyer shall notify Seller in writing promptly and in no case later than thirty 30 days after discovery of the failure of any Product to con form to the warranty set forth above shall describe in commercially reasonable detail in such notice the symptoms associated with such failure and shall provide to Seller the opportunity to inspect such Products as installed if possible The notice must be received by Seller during the Warranty Period for such product unless otherwise directed in writing by the Seller Within thirty 30 days after submitting such notice Buyer shall package the allegedly defective Product in its original shipping carton s or a functional equivalent and shall ship to Seller at Buyer s expense and risk Within a reasonable time after receipt of the allegedly defective Prod uct and verification by Seller that the Product fails to meet the war ranty set forth above Seller shall correct such failure by at Seller s options either i modifying or repairing the Product or ii replacing the Product Such modification repair or replacement and the return shipment of the Product with minimum insurance to Buyer shall be at Seller s expense Buyer shall bear the risk of loss or damage in transit and may insure the Product Buyer shall reimburse Seller for transpor tation cost incurred for Product returned but not found by Seller to be defective Modification or repair o
7. 0Hzz 1280 x 1024 60Hz 1360 x 768 60Hz 1366 x 768 60Hz 1600 x 1200 60Hz 1680 x 1050 60Hz 1366 x 768 1500 1 typical No Touch Typical 450 cd m Min 340 cd m IntelliTouch Typical 450 cd m Min 340 cd m Surface Capacitive Typical 415 cd m Min 320cd m APR Typical 450 cd m Min 340cd m 8 ms typical 16 7 Million Vertical 88 to 88 typical Horizontal 88 to 88 typical RGB Analog Video 0 7V p p 75 ohm separate syncs composite sync or sync on green TTL positive or negative DVI Video not available for ET2639L xxxx x A x models Horizontal scan frequency 30 to 75KHz Vertical frame rate range 48 to 63Hz Dot clock range less than 88MHz Analog 15 pin Female D Sub Digital Female DVI D not available for ET2639L xxxx x A x models Elo TouchSystems ET2639L User Guide 24 Plug amp Play Touch Technology optional Power Input Operating Conditions Storage Conditions Dimensions HxWxD Weight Unpackaged DDC1 and DDC2B IntelliTouch Surface Capacitive or Acoustic Pulse Recognition 100 240Vac 50 60Hz 2 5A Temp 0 C to 40 C Humidity 20 to 80 No Condensation Altitude 0 to 3 658 m Temp 20 C to 60 C Humidity 10 to 90 No Condensation Altitude 0 to 12 192 m 650 x 397 x 98 mm 14 2 kg Elo TouchSystems ET2639L User Guide 25 ET2639L 26 LCD Touchmonitor Dimensions 650mm 39 fmm Note Detailed mechanical files can be fo
8. connect your touchmonitor to your computer 1 Connect the power cable to the rear panel of the monitor and the other end to the power outlet 2 Connect either the USB cable OR the serial cable to the rear panel of the monitor Note Do not use both Connect the other end to your computer 3 Connect the video cable and or the DVI D cable to the rear panel of the monitor Tighten by turning the two thumb screws clockwise to ensure proper grounding Connect the other end to your computer 4 Connect the OSD control box to the monitor 5 Press the power button on the rear panel to turn the monitor Elo TouchSystems ET2639L User Guide 8 Installing the Touch Driver Your Elo touchmonitor is Plug and Play compliant Information on the video capabilities of the touchmonitor is sent to the video display adapter when Windows starts If Windows detects the touchmonitor follow the instructions on the screen to install a generic Plug and Play monitor Elo TouchSystems provides touch driver software that allows your touchmonitor to work with your computer Drivers are located on the enclosed CD for the following operating systems e Windows e Windows 2000 e Windows e Windows 98 e Windows 95 Windows NT 4 0 The latest versions of drivers and driver information for other operat ing systems are available on the Elo TouchSystems web site at www elotouch com support downloads To install the Touch Driver for Windows XP W
9. creen to complete the driver setup for your version of Windows Elo TouchSystems ET2639L User Guide 10 Monitor Mounting Orientation When the monitor is mounted in the landscape orientation the cable connection panel must be at the bottom as shown in the illustration below Rear View of Monitor Landscape Orientation Cable connection panel must be at the bottom for proper mounting of the monitor Alternatively the monitor may be mounted in the portrait orientation For this orientation the cable connection panel may be on either side as shown in the illustrations below Rear View of Monitor Portrait Orientation Elo TouchSystems ET2639L User Guide 11 Landscape Mounting Orientation Angle Views The mounting orientation can be up to a 90 as shown in the illustrations 7 angle from vertical 12 Elo TouchSystems ET2639L User Guide Portrait Monitor Orientation Angle Views The mounting orientation can be up to a 90 as shown in the illustration below angle 4440404686 444454 2 7 1 59529554 ion LE o o ood m iin ob ee eee ee ew 20000020 de E TE E LE LET 00000000 040009000000000000004000000000 0005000094 90060000009000000400900004950090 EFICACIA a ow mode om
10. e technician check it before you power it on again Do not wipe the screen with a cloth or sponge that could scratch the surface To clean the touchscreen use window or glass cleaner Put the cleaner on the rag and wipe the touchscreen Never apply the cleaner directly on the touchscreen Warning This product consists of devices that may contain mercury which must be re cycled or disposed of in accordance with local state or federal laws Within this system the backlight lamps in the monitor display contain mercury Waste Electrical and Electronic Equipment WEEE Directive In the European Union this label indicates that this product should not be disposed of with household waste It should be deposited at appropriate I facility to enable recovery and recycling Elo TouchSystems ET2639L User Guide 22 APPENDIX B TECHNICAL SPECIFICATIONS Elo TouchSystems ET2639L User Guide 23 ET2639L Specifications Model LCD Display Display Size Pixel Pitch Preset Display Modes require no user adjustments of image Native Resolution Contrast Ratio Brightness Response Time gray to gray Display Color Viewing Angle Input Video Signal Input Video Range Video Signal Connector ET2639L 26 TFT Active Matrix Panel 575 769 H x 323 712 V mm 4215 H x 4215 V mm 640 x 480 60Hz 800 x 600 56Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 800 RB and non RB 1280 x 960 6
11. ers This equipment generates uses and can radiate radio frequency energy If not installed and used ac cording to this manual the equipment may cause interference with radio and television communications There is however no guarantee that interference will not occur in any particular installation due to site specific factors 1 In order to meet emission and immunity requirements the user must observe the following a Use only the provided I O cables to connect this digital device with any computer b To ensure compliance use only the provided manufacturer s approved line cord c The user is cautioned that changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Elo TouchSystems ET2639L User Guide 28 2 If this equipment appears to cause interference with radio or television reception or any other device a Verify as an emission source by turning the equipment off and on b If you determine that this equipment is causing the interference try to correct the interference by using one or more of the following measures 1 Move the digital device away from the affected receiver ii Re position turn the digital device with respect to the affected receiver iii Reorient the affected receiver s antenna iv Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch
12. es This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules These limits are designed to pro vide reasonable protection against harmful interference in a residential or commercial installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accor dance with the instructions may cause harmful interference to radio communications Elo TouchSystems ET2639L User Guide 27 B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada C Notice to Users in the European Union Use only the provided power cords and interconnecting cabling provided with the equipment Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards This Information Technology Equipment ITE is required to have a CE Mark on the manufacturer s label which means that the equipment has been tested to the following Directives and Standards This equipment has been tested to the requirements for the CE Mark as required by EMC Directive 89 336 EEC indicated in European Standard EN 55022 Class A and the Low Voltage Directive 73 23 EEC as indicated in European Standard EN 60950 D General Information to all Us
13. f Products may at Seller s option take place either at Seller s facilities or at Buyer s premises If Seller is unable to modify repair or replace a Product to conform to the war ranty set forth above then Seller shall at Seller s option either refund to Buyer or credit to Buyer s account the purchase price of the Elo TouchSystems ET2639L User Guide 31 Product less depreciation calculated on a straight line basis over Seller s stated Warranty Period THESE REMEDIES SHALL BE THE BUYER S EXCLUSIVE REME DIES FOR BREACH OF WARRANTY EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE SELLER GRANTS NO OTHER WARRANTIES EXPRESS OR IMPLIED BY STATUTE OR OTHER WISE REGARDING THE PRODUCTS THEIR FITNESS FOR ANY PURPOSE THEIR QUALITY THEIR MERCHANTABILITY THEIR NONINFRINGEMENT OR OTHERWISE NO EMPLOYEE OF SELL ER OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WAR RANTY FOR THE GOODS OTHER THAN THE WARRANTY SET FORTH HEREIN SELLER S LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO A REFUND OF THE PURCHASE PRICE OF THE PRODUCT IN NO EVENT SHALL SELLER BE LIABLE FOR THE COST OF PROCUREMENT OR INSTALLATION OF SUBSTI TUTE GOODS BY BUYER OR FOR ANY SPECIAL CONSEQUEN TIAL INDIRECT OR INCIDENTAL DAMAGES Buyer assumes the risk and agrees to indemnify Seller against and hold Seller harmless from all liability relating to i assessing the suit ability for Buyer s intended use of the Products and of any system design or drawing and ii determ
14. indows 2000 Me and 98 follow the steps below NOTE For Windows XP and Windows 2000 you must have administrator access rights to install the driver 1 Insert the Elo CD ROM in your computer s CD ROM drive If Windows XP Windows 2000 Windows 98 or Windows Me start the Add New Hardware Wizard follow these steps if it does not open follow steps 1a through 2a Elo TouchSystems ET2639L User Guide 9 Choose Next Select Search for the best driver for your device Recommended and choose Next When a list of search locations is displayed place a checkmark on Specify a location and use Browse to select the EIOUSB directory on the Elo CD ROM Choose Next Once the Elo TouchSystems touchscreen driver has been detected choose Next again You will see several files being copied Insert your Windows 98 CD if prompted Choose Finish If Windows XP Windows 2000 Windows 98 or Windows Me does not start the Add New Hardware Wizard 1a 2a Insert the Elo CD ROM in your computer s CD ROM drive If the AutoStart feature for your CD ROM drive is active the system automatically detects the CD and starts the setup program Follow the directions on the screen to complete the driver setup for your version of Windows If the AutoStart feature is not active Click Start gt Run Click the Browse button to locate the EloCd exe program on the CD ROM Click Open then OK to run EloCd exe Follow the directions on the s
15. ing Please refer to page 22 for proper cleaning methods Your new touchmonitor is equipped with a 3 wire grounding power cord The power cord plug will only fit into a grounded outlet Do not attempt to fit the plug into an outlet that has not been configured for this purpose Do not use a damaged power cord Use only the power cord that comes with your Elo TouchSystems Touchmonitor Use of an unauthorized power cord may invalidate your warranty The slots located on the sides and top of the touchmonitor case are for ventilation Do not block or insert anything inside the venti lation slots It is important that your touchmonitor remains dry Do not pour liquid into or onto your touchmonitor If your touchmonitor becomes wet do not attempt to repair it yourself Elo TouchSystems ET2639L User Guide 21 Care and Handling of Your Touchmonitor The following tips will help keep your Elo touchmonitor functioning at the optimal level To avoid risk of electric shock do not disassemble the touchmonitor The unit is not user serviceable Remember to unplug the touchmonitor from the power outlet before cleaning Do not use alcohol methyl ethyl or isopropyl or any strong dissolvent Do not use thinner or benzene abrasive cleaners or compressed air To clean the display unit cabinet use a cloth lightly dampened with a mild detergent Avoid getting liquids inside your touchmonitor If liquid does get inside have a qualified servic
16. ining the compliance of Buyer s use of the Products with applicable laws regulations codes and stan dards Buyer retains and accepts full responsibility for all warranty and other claims relating to or arising from Buyer s products which include or incorporate Products or components manufactured or supplied by Seller Buyer is solely responsible for any and all representations and warranties regarding the Products made or authorized by Buyer Buyer will indemnify Seller and hold Seller harmless from any liability claims loss cost or expenses including reasonable attorney s fees attributable to Buyer s products or representations or warranties con cerning same Elo TouchSystems ET2639L User Guide 32 Check out Elo s Website www elotouch com Get the latest e Product information e Specifications e News on upcoming events e Press release e Software drivers Touch Monitor Newsletter Getting in Touch with Elo To find out more about Elo s extensive range of touch solutions visit our Website at www elotouch com or simply call the office nearest you North America Elo TouchSystemss 301 Constitution Drive Menlo Park CA 94025 USA 800 ELO TOUCH 800 356 8682 Tel 650 361 4800 Fax 650 361 4747 eloinfo elotouch com TOUCHSYSTEMS Germany Tyco Electronics Raychem GmbH Elo TouchSystems Division Finsinger Feld 1 D 85521 Ottobrunn Germany Tel 49 0 89 60822 0 Fax 49 0 89 60822 180 e
17. losales elotouch com Belgium Asia Pacific Tyco Electronics Raychem N V Sun Hamada Bldg 2F Elo TouchSystems Division 1 19 20 ShinYokohama Diestsesteenweg 692 Kanagawa 222 0033 B 3010 Kessel Lo Japan Belgium Tel 32 0 16 35 21 00 Tel 81 45 478 2161 Fax 32 0 16 35 21 01 Fax 81 45 478 2180 elosales elotouch com www tps co jp YSN s21004129 3 OPA 8005 Electronics Our commitment Your advantage Elo TouchSystems ET2639L User Guide 33
18. nitor does not respond after you turn on the system Characters on the screen are dim The screen is blank Screen flashes when initialized Out of Range display Touch doesn t work Suggestion s Check that the monitor s Power Switch is on Turn off the power and check the monitor s power cord and signal cable for proper connection Refer to the On Screen Display OSD Control Box section to adjust the brightness During operation the monitor screen may automatically turn off as a result of a computer Power Saving feature Press any key to see if the screen reappears Refer to the On Screen Display OSD Control Box section to adjust the Turn the monitor off then turn it on again Check to see if the video mode or vertical frequency of your video source is outside the range of the touchmonitor See Chapter 3 and Appendix B for more information on allowable video modes Make sure the USB or serial cable is securely attached at both ends Elo TouchSystems ET2639L User Guide 20 TOUCHMONITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor Before setting Up and power ing on your new touchmonitor read through this manual especially Chapter 2 Installation and Setup and Chapter 3 Operation 1 To reduce the risk of electric shock follow all safety notices and never open the touchmonitor case Turn off the product before clean
19. or temperature settings Recall Defaults Restores original factory settings for H position V position Clock and Phase for the current video mode VGA only Restores original factory settings for all other parameters and video inputs except language VGA and DVD Miscellaneous Sharpness e Adjusts sharpness of video Display Information e Frequency of the input horizontal vertical synchronizing signal is indicated Elo TouchSystems ET2639L User Guide 18 Preset Display Modes The monitor comes with preset settings for commonly used video modes It will automatically adjust the picture size and centering for any of the video modes listed in Appendix B ET2639L Specifications table under Preset Display Modes If you make any adjustments to the H position V Position Clock and Phase video settings via the OSD in a preset display mode those changes will be automatically saved for that display mode and recalled for any future use of that display mode Selecting Restore Factory Defaults will revert to the factory default setting for the preset video mode in which you are currently operating Elo TouchSystems ET2639L User Guide 19 TROUBLESHOOTING If you are experiencing trouble with your touchmonitor refer to the fol lowing table If the problem persists please contact your local dealer or our service center Elo Technical Support numbers are listed on page 33 Solutions to Common Problems Problem The mo
20. t in trademarks other than its own Elo TouchSystems ET2639L User Guide 3 Table of Contents Chapter T Introduction tiara dr 5 A o e 5 Chapter 2 Installation And 6 Unpacking Your TouchMonitor at 7 c EE 8 Instollins the DVEF ftn RII NODE DI KAMEN 9 Monitor Mounting maison DTE valia iio 11 Chapter 3 Ninas dE 14 About Touchmonitor Adjustments dd 14 On Screen Display OSD Control BOX 15 Preset Orpa 19 Chapter 4 20 Solutions to Common Problems 20 Appendix A Touchmonitor 21 Care and Handling of Your Touc BEHOBHOE nine 22 Appendix B Technical Specifications eere eene 23 SC CC AOS PP e 24 E12639L 26 LCD Touchmonitor Dimensions rr 26 Re PON 27 E o 31 Elo TouchSystems ET2639L User Guide 4 INTRODUCTION About the Product Your new ET2639L Elo TouchSystems Touchmonitor combines the reliable performance of touch technology with the latest advances in Liquid Crystal Display LCD design The monitor comes with the fol lowing features
21. t turn off the monitor The monitor is shipped in the unlocked position To lock the power 1 Press the MENU button and the DOWN button simultaneously for 2 seconds A window will appear displaying Power Unlock 2 Continue to hold the buttons down for another 2 seconds and the window toggles to Power Lock NOTE By default the OSD screen will disappear if no input activities are detected for 30 seconds Elo TouchSystems ET2639L User Guide 16 OSD Control Options Auto Adjust Automatically adjusts video timing parameters of VGA video only Luminance Brightness Adjusts the brightness Contrast e Adjusts the contrast Geometry VGA only H position Moves the image left or right on the screen V position Moves the image up or down on the screen Clock e Stretches the image horizontally Phase e Adjusts the phase of the dot clock to image data Color Sets the color temperature Input Select e Selects between VGA and DVI input signals not available for ET2639L xxxx x A x models OSD OSD H Position e Adjusts the OSD menu screen left or right OSD V Position e Adjusts the OSD menu screen up or down OSD Timeout e Adjusts amount of time that the OSD menu is displayed Language e Selects the language used for the OSD menu from English French German Spanish Italian Traditional Chinese Simplified Chinese or Japanese Elo TouchSystems ET2639L User Guide 17 Recall Recall Color Restores default col
22. und at www elotouch com Elo TouchSystems ET2639L User Guide 26 REGULATORY INFORMATION Electrical Safety Information A Compliance is required with respect to the voltage frequency and current requirements indicated on the manufacturer s label Connec tion to a different power source than those specified herein will likely result in improper operation damage to the equipment invalidation of warranty or a fire hazard if the requirements are not followed B There are no operator serviceable parts inside this equipment There are hazardous voltages generated by this equipment which constitute a safety hazard Service should be provided only by a quali fied service technician C This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet 1 Do not substitute the cord with other than the provided approved type Under no circumstances use an adapter plug to connect to a 2 wire outlet as this will defeat the continuity of the grounding wire 2 The equipment requires the use of the ground wire as a part of the safety certification Modification or misuse can provide a shock hazard that can result in serious injury or death 3 Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to main power Emissions and Immunity Information A Notice to Users in the United Stat
Download Pdf Manuals
Related Search