Gefen EXT-2DVI-DLKVM-CAT6 console extender
Contents
1. CAT 5e CAT 6a cables e Rack mountable e Plug and Play Applications e This product is used for dual display extended desktop applications Package Includes 1 2x Dual Link DVIKVM Extender over CAT 6a Sender Unit 1 2x Dual Link DVIKVM Extender over CAT 6a Receiver Unit 2 6ft Dual Link DVI cable M M 1 6ft USB Cable A B 2 5V DC Locking Power Supplies 1 AC Power Cord 2 Sets of Rack Ears 1 1 Quick Start Guide SENDER UNIT LAYOUT jaueg xoeg joued 14044 10 11 SENDER UNIT DESCRIPTIONS Power This LED indicator will glow bright red once the included 5V DC locking power supply is properly connected between the unit and an available electrical outlet CAT 6 Link 1 1 Connect a CAT 6a cable between this port and the CAT 6 Link 1 1 port on the Receiver unit DVI In 1 Connect a dual link cable from this connector to the DVI digital only source CAT 6 Link 1 2 Connect a CAT 6a cable between this port and the CAT 6 Link 1 2 port on the Receiver unit USB In Connect the included USB cable between this port and a computer or other USB host device USB Link LED This LED indicator will glow bright green when a CAT 6a cable is connected between the USB Link ports on both the Sender and Receiver unit USB Link Connect a CAT 6a cable between this jack and the USB Link jack on the Receiver unit CAT 6 Link 2 1 Connect a CAT 6a cable between this port and the2. CAT 6 Link 2 1 port on the Receiver unit DVI In 2 Connect a dual link cable from this connector to the DVI digital only source CAT 6 Link 2 2 Connect a CAT 6a cable between this port and the CAT 6 Link 2 2 port on the Receiver unit 5V DC Connect the included 5V DC locking power supply to this receptacle RECEIVER UNIT LAYOUT jaueg xoeg joued 14044 10 11 12 RECEIVER UNIT DESCRIPTIONS EQ 1 The EQ adjustment trim for Out 7 Both EQ 7 and EQ 2 compensate for the extension distance and the quality skew variances that are found in different brands of CAT 6a cables EQ 2 The EQ adjustment trim pot for DVI Out 2 Power The LED power indicator will glow bright red once the included 5V DC power supply is properly connected between the unit and an available electrical outlet Link 2 1 Connect a CAT 6a cable between this port and the CAT 6 Link 2 1 port on the sender unit DVI Out 2 Connect a dual link cable from this connector to the a DVI display Link 2 2 Connect a CAT 6a cable between this port and the CAT 6 Link 2 2 port on the sender unit USB Out 1 4 Connect up to four USB devices to these ports USB Out LED 1 4 Each of these LED indicators will glow bright green once a USB device is connected to the USB port USB Link Connect a CAT 6a cable between this jack and the USB Link jack on the Receiver unit Host LED This LED indicator will glow bright green
3. Continue adjusting the trim pot by trying all 8 positions until the issue is resolved 3 Carefully remove the adjustment tool Trim Pot Trim Pot IMPORTANT Any time a cable is changed out or replaced the trim pots on the Receiver unit will need to be adjusted 12 NETWORK CABLE WIRING DIAGRAM Gefen has specifically engineered products to work with the TIA EIA 568 B specification Please follow the table below when field terminating cable for use with Gefen products Failure to do so may produce unexpected results and reduced performance 12345678 Blue White This product was designed for use with CAT 6a augmented cabling only This unit will either not perform to specification or refuse to operate completely if cabling other than CAT 6a is used Each cable run must consist of a single undivided segment of CAT 6a cabling from Sender to Receiver Punch down blocks or splices will not work 13 SPECIFICATIONS Maximum Eeler 2 165 MHz PAGE Video ei dz INO RR RR ONE CORRER RR 1 2V p p gje Wig BIB GSC EE 5V p p TTL Video Input Connectors Sender 2 DVI I 29 pin female digital only Video Output Connectors Receiver 2 DVI I 29 pin female digital only USB Host Connector 5 1 USB Type B female USB Device Connectors Receiver 4 USB Type A female Link Connecto
4. when a CAT 6a cable is connected between the USB Link ports on both the Sender and Receiver unit Link 1 1 Connect a CAT 6a cable between this port and the CAT 6 Link 1 1 port on the sender unit DVI Out 1 Connect a dual link cable from this connector to the a DVI display RECEIVER UNIT DESCRIPTIONS 13 Link 1 2 Connect a CAT 6a cable between this port and the CAT 6 Link 1 2 port on the sender unit 14 5V DC Connect the included 5V DC power supply between this input and an open wall power socket CONNECTING THE 2X DUAL LINK DVIKVM EXTENDER OVER CAT 6A How to Connect the 2x Dual Link DVIKVM Extender Over CAT 6a 1 Connect the included dual link DVI cables between the DVI outputs on each computer and the DVI In connectors on the 2x Dual Link DVIKVM Extender Over CAT 6a Sender unit 2 Connect the included USB cable from the computer or other USB host device to the USB n port on the Sender unit 3 Connect five CAT 6a cables between the Sender and Receiver units Each connector on the Sender and Receiver unit is identified as Link 1 1 Link 1 2 Link 2 1 Link 2 2 and USB Link When connecting the CAT 6 cables make sure that the connectors on the Sender unit are connected to the corresponding connectors on the Receiver unit e g Link 1 1 gt Link 1 1 Link 1 2 gt Link 1 2 USB Link gt USB Link and so on e NOTE When field terminating CAT 6a cables follow the TIA EIA 568 B specification outlined on page
5. 13 IMPORTANT When extending Dual Link resolutions both CAT 6a cables must be exactly the same length 4 Connect two dual link DVI cables from the Receiver unit to each of the two dual link displays 5 Connect up to four USB devices to the USB Out ports on the Receiver unit 6 Connect the included 5V DC power supplies to the Sender and Receiver units Connect the AC power cord from each power supply to available electrical outlets Wiring Diagram for the 2x Dual Link DVIKVM Extender Over CAT 6a 6 CABLE mmm USB CABLE mum EXT 2DVI DLKVM CAT6 Dual Link DVI Display 9 DIP SWITCH CONFIGURATION DIP Switch Location On the bottom of both the Sender unit and Receiver unit is a bank four 4 DIP switches The DIP switches on the Sender unit allow the management of EDID fiber optic extenders and HDCP e NOTE The DIP switches on the Receiver unit do not provide any function and are reserved for future expansion Sender unit The four DIP switches on the bottom of the Sender unit DIP Switch 1 EDID Management e ON Pass Through EDID DDC and HPD are passed through Both the connection status and the full video capabilities of the monitor All video features of the connected devices are passed to the source device e OFF default Local EDID When Local EDID mode is used the EDID will be assembled by copying all video features of the connected output device 10 DIP SWITCH CON
6. 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 15 Rev 1 DVI DLKVM CAT6 2 20600 Nordhoff St Chatsworth 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com amp ce 3 Cs e This product uses UL listed power supplies
7. ES Geren Dual Link BVIKVM Extender Over CAT Ga EXT 2DVI1I DLKVM CATG User Manual ww gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday through Friday Pacific Time Write To Gefen LLC c o Customer Service 20600 St Chatsworth CA 91311 www gefen com support 2gefen com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice 2x Dual Link DVIKVM Extender Over CAT 6a is a trademark of Gefen LLC 2012 Gefen LLC All rights reserved All trademarks are the property of their respective owners Rev 1 10 13 14 19 CONTENTS Introduction Operation Notes Features Sender Unit Layout sender Unit Descriptions Receiver Unit Layout Receiver Unit Descriptions Connecting the 2x Dual Link DVIKVM Extender Over CAT 6a Wiring Diagram DIP Switch Configuration Adjusting the Signal Quality Network Cable Wiring Diagram Specifications Warranty INTRODUCTION Congratulations on your purchase of the 2x Dual Link DVI KVM Extender Over 6 Your complete satisfaction is very important to us Gefen Gefen delivers innovative progressive computer and electronics add on solutions that harness integration extension distribution and conversion techno
8. FIGURATION DIP Switch 2 5V for Fiber Optic Extenders e ON Enable 5V Enable 5V for DVI fiber optic extenders e OFF default Disable 5V Disable 5V for DVI fiber optic extenders DIP Switch 3 DVI Support DIP switch 3 is only functional when DIP switch 1 is set to OFF Local EDID e ON DVI Mode If a DVI connection is used set DIP 3 to the ON position DVI is supported by disabling HDCP pass through e OFF default HDCP Pass Through If HDMI is connected set DIP 3 in the OFF position DIP Switch 4 Not used e Reserved for future expansion IMPORTANT After changing DIP switch 1 or DIP switch 3 the Sender unit must be power cycled for the changes to take effect 11 ADJUSTING THE SIGNAL QUALITY Adjusting the Signal Quality The 2x Dual Link DVIKVM Extender Over CAT 6a Receiver unit has two trim pots trim potentiometers to compensate for the extension distance and the quality skew variances that are found in different CAT 6a cabling brands EQ 7 adjusts the output signal for DV Out 1 and EQ 2 adjusts the signal for DV Out 2 If there is no output video or if output video contains video artifacts and or video noise such as snow use the steps below to adjust the trim pot 1 Insert a small flat headed tool into each of the trim pots on the front panel of the Receiver unit 2 Each trim pot has 8 set positions Turn the trim pot in a clockwise fashion until it clicks to the next position
9. logies Gefen s reliable plug and play products supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working solutions that are easy to implement and simple to operate The Gefen 2x Dual Link DVI KVM Extender Over CAT 6a The 2x Dual Link DVIKVM Extender over 15 a cost effective solution that allows the extension of keyboard video and mouse to a remote workstation up to 200 feet 60 meters away This product is particularly useful because it is able to extend dual link resolutions beyond the limitations of standard DVI cables Dual link resolutions up to 3840 x 2400 are supported using two CAT 6a cables for each display USB 2 0 data rates up to 480 Mbps are supported in addition to backward compatibility with USB 1 1 The Receiver unit allows the connections of up to four USB devices providing access to printers scanners cameras external storage media digital signage and automated control systems How It Works Place the 2x Dual link DVIKVM Extender over CAT 6a Sender unit next to the DVI sources Use the included DVI cables to connect the DVI sources to the sender unit Use the supplied USB cable to connect the USB host source device to the USB port on the Sender unit Connect the Receiver unit to two dual link DVI displays using DVI cables Connect up to four USB devices to the Receiver unit Use five CAT 6a cables each up to 200 feet 60 meters to co
10. nnect the Sender to the Receiver unit Connect the included locking power supplies to the Sender and Receiver units and plug both power cords into available electrical outlets OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 2X DUAL LINK DVIKVM EXTENDER OVER CAT 6A The 2x Dual Link DVIKVM Extender Over CAT 6a was designed for use with high quality CAT 6a augmented cabling This unit will either not perform to specification if cabling other than CAT 6a is used When using CAT 5e cables the maximum extension distance is 150 feet 30 meters at 1080p Full HD or 2560 x 1600 When field terminating CAT 6a cabling please adhere to the TIA EIA 568 B specification shown on page 12 USB can be extended up to 330 feet 100 meters d IMPORTANT When extending Dual Link resolutions both CAT 6a cables must be exactly the same length FEATURES Features e Extends two dual link DVI sources with USB 2 0 up to 200 feet 60 meters using CAT 6a cables e Supports dual link resolutions up to 3840 x 2400 e HDCP compliant e Supports 480 Mbps using USB 2 0 e Backward compatible with USB 1 1 devices e Supports DDWG standard for DVI compliant monitors e Supports any Operating System OS EDID management for rapid intergration of source and display devices e EQ adjustment trim pots on Receiver unit to equalize the signal to compensate for cable length and the quality skew variances found among different
11. rs Sender 5 RJ 45 Power Supply Sender 5V DC Locking Power Consumption Sender 20W max Operating 32 to 104 F 0 to 40 Dimensions W x H D 17 5 x 2 57 5 445mm x 64mm x 127mm Rack E 10 rack ears included 9 5 lbs 4 3 kg 14 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty
Download Pdf Manuals
Related Search